CLI Chemist David Ostemeyer blends a custom coolant formula.
Custom Formulas
Costly? No. Cost-effective.
Sometimes off-the-shelf products simply don’t work like you want them to. Technical support can be hard to come by and large manufacturers don’t respond well to changing their formulas.
That’s where we come in. Creating the RIGHT chemical solution is what we do.
Costly testing? No. It’s free.
The testing is free. That’s right…free. We only ask you to fairly test the custom blend we create for you. We’ll even re-formulate (again, at no-cost to you) if we can improve upon on the solution.
Costly solution? No. Cost-effective.
In some cases, we’ve eliminated our client’s use of multiple over-the-shelf products by making a single superior product. Sometimes our products are so superior, that the production step requires less of it. Other times our custom solutions have significantly extended tool life for impressive cost savings. Not costly. Cost-effective.
Your biggest problem? Give it to us.
What’s your biggest problem in your metalworking process? If it’s fluid-related or lubricant-related, we can probably fix it.
We’ll investigate
Using our dedicated laboratory, our chemists will test your current fluids for free.
We’ll formulate
We’ll scientifically develop a custom blend that solves your problem.
You’ll celebrate
Then we’ll make sure that when our custom blend works for your production line, it will also work for your bottom line.
All risk-free and at no cost to you.
Missouri Research Park9 Research Park Drive, St. Charles, MO 63304
636.926.9903 www.clisyntec.com
Consultant Lubricants, Inc.
Problem-solving
“The Solution is Science”
CLI Technical Director Kipp Kohl consults onsite with a client.
Extending tool life is one of the cost-saving results of our custom formulas.
About CLI
Since our beginning in 1976, Consultant
Lubricants, Inc. has been solving
challenging coolant and lubrication issues
within metalworking processes.
Our purpose is to create superior custom
products that reduce our client’s total
operating costs and increase their profits.
We do this through our experienced
technical field personnel, our on-site
laboratory with our own full-time
chemists, and our on-site testing
equipment.
We’ve made an impact in several
industries, including: Aerospace,
Automotive, Transportation, Industrial
Manufacturing, Hardware and Electrical,
Lawn and Garden, Pretreatment…just to
name a few.
DRAWING, STAMPING, andFORMING COMPOUNDS
• Blanking• Coining• Cold Heading• Drawing• Forging• Press Fitting• Punching• Rolling• Stamping
MACHINING COOLANTS and CUTTING OILS
• Boring• Broaching• Chamfering• Deburring• Drilling• Grinding• Grooving• Hobbing• Milling• Tapping• Treading• Turning• Quenching• Reaming• Honing• Lapping
AHSS COMPOUNDS
• Stamping• More in development
PRE-TREATMENT
• Cleaners• Conversion Coatings• Sealers
SPECIALTY
• Corrosion Inhibitors• Rust Prevention• Specialty Greases• Anti-spatter• Degreasers
DIE CASTING and FOUNDRY COMPOUNDS
• Multi-metal Die casting Compounds• Ceramic Mold and Ladle Coatings• Plunger Lubricants• Machining Fluids• Heat Transfer Oils• Trim Die / Press Lubricants• Heat Quenching Compounds• Column Guide Grease• Vibratory Finishing Compounds• Custom Formulations
FINISHING COMPOUNDS
• Reaming• Honing• Lapping
CONVENTIONAL LUBRICANTS
• Hydraulic Fluids• Gear Lubricants• Way Lubricants• Motor Oil
Our clients appreciate how we’re willing to test, formulate, and re-formulate if necessary to blend the most effective solution…risk-free and at no cost to them.
- Mel Kohl, CLI President