CLICK HERE FOR NAVIGATION HINTS - Home | NH Bragg...Wrenches Combination 73-76 Open End 76-77 Box...

CLICK HERE FOR NAVIGATION HINTS

2

SPEED INDEX

ALLENTM QUICK REFERENCE

To facilitate the use of your Allen catalog, we have devised thefollowing speed index. All products have been organized underthe appropriate catalog section and categorized by tool type

for quick reference. To locate a specific item number, pleaserefer to the index on pages 173 -176.

Catalog Product PageSection Category Number(s)

Industrial Tool Sets Tool Sets 11-21Tool Boxes 22Set Contents Listing 177-185

Drive Tools & Sockets 1/4" Drive Ratchets 251/4" Drive Accessories 25-261/4" Drive Sockets 27-281/4" Drive Socket Sets 29-313/8" Drive Ratchets 32-333/8" Drive Accessories 33-353/8" Drive Sockets 35-393/8" Drive Socket Sets 40-521/2" Drive Ratchets 52-531/2" Drive Accessories 54-551/2" Drive Sockets 55-581/2" Drive Socket Sets 59-633/4" Drive Ratchets 633/4" Drive Accessories 643/4" Drive Sockets 65-663/4" Drive Socket Sets 66-671" Drive Ratchets 681" Drive Accessories 681" Drive Sockets 69-701" Drive Socket Sets 70

Wrenches Combination 73-76Open End 76-77Box End 77-78Flare Nut 78Ratcheting Box End 78Adjustable 79Structural 79Spanner 80Striking Face 80-81Crowfoot 81Wrench Sets 82-90

Crowfoot 81Combination 82-87Open End 88-89Box End 88Flare Nut 90Ratcheting Box End 90Adjustable 90

Hex Keys & Sets Fold-Ups 93-95Duracast® 93Standard 94Long 94Torx® 95

Short-Arm Hex Keys 96Short-Arm Hex Key Sets 96-97Long-Arm Hex Keys 98Long-Arm Hex Key Sets 98-100

Catalog Product PageSection Category Number(s)

Hex Keys & Sets 6" & 12" Long Arm Hex Keys 100cont’d. 6" & 12" Long Arm Hex Key Sets 100

Ball-End L-Keys 101Ball-End L-Key Sets 102-103Cushion-Grip T-Handles 102Cushion-Grip T-Handle Sets 103Loop T-Handles 106Loop T-Handle Sets 106-107Plas-T-Key® T-Handles 107Plas-T-Key® T-Handle Sets 107Forged T-Handles 108Screwdriver Handle & Sets 103-104Straight Bits 109Hex Key Assortments 109

General Use Tools& Displays Hacksaws 113

Pliers 113-114Screwdrivers 115-116Nut Drivers 116Punches 117Chisels 118-119Bars 119Punch and Chisel Sets 120-121Hammers 122Tool Storage 123Displays 124-130

K-D® Torque Tools Torque Wrenches 133-134Dial 133Micrometer 133Torque Multiplier 134Beam 134

Torque Screwdrivers 134Torque Angle Gauge 134

K-D® Specialty Tools Basic Engine 137-138Valve Engine 139-140Fuel System Engine 141Filter Wrenches 142-145Suspension & Drive Train 146Drive Line 147Ignition & Electrical 148-150Brake & Wheel 151-157Cooling & Exhaust 158Specialty 159-162Feeler Gauges 163-164Pullers 165-166Snap Rings, Pliers, Tools 167-169Brushes 170-172

Index by Item Number 173-176Key Fit Selector Charts 186Conversion Chart 187

3

GENERAL INFORMATION

PROUDLY MADE IN THE U.S.A.

AllenTM Industrial Hand Tools are proudly designed and manufactured in theUSA and meet the Federal Trade Commissions “all or virtually all” rulingreaffirmed in December 1997. Each tool that bears the Made in the USAmark has earned this honor and represents our commitment to uncom-promising quality and durability.

WARRANTY

Allen Industrial Hand Tools feature a lifetime warranty to insure your com-plete satisfaction. If any Allen tool does not perform satisfactorily, whenused for its intended purpose, return it to the place of purchase for repair or replacement free of charge. Normal wear or misuse is excluded. Uponfactory inspection, tools showing evidence of abuse, misuse, worn-out,altered, or used for purposes other than intended are not covered underthis warranty. Increasing and Reducing Adapters are stamped “NotWarranted” and are not covered under this policy.There is a limited warranty on Serviceable Product (torque wrenches) oneyear from date of purchase. (Torque wrench calibration warranty period -90 days). For further information, please contact your Allen IndustrialDistributor or Allen Sales Representative, or refer to your Allen Price List for complete details.

LIABILITY

The Danaher Tool Group is not responsible for personal injury or damageresulting from improper tool usage, product modification, abuse, or usagebeyond expected product life.

FEDERAL AND ANSI SPECIFICATIONS

Federal and ANSI specifications contained in this catalog are intended as aguide only for tool classification and do not infer that the tool identified is infull compliance with the specification indicated. In addition, where specifi-cations are listed, certain Black Ox™ (black oxide) tools may meet fulldimensional compliance, except for coatings. For specific informationregarding compliance, contact your Allen Industrial Distributor, Allen SalesRepresentative, or Allen customer service at 1-800-866-5753.

DIMENSIONS

All dimensions shown in this catalog are nominal. If minimum/maximumdimensions must be determined, please contact your Allen IndustrialDistributor, Allen Sales Representative, or Allen customer service at1-800-866-5753.Finishes, materials, dimensions, and designs are subject to change withoutnotice. Allen also reserves the right to discontinue items at any time with-out notice as part of our ongoing product development.

WHERE TO BUY ALLEN INDUSTRIAL HAND TOOLS

Allen Industrial Hand Tools are stocked and distributed by IndustrialDistributors throughout the U.S.A. and Canada. If you need the name ofyour local Allen Industrial Distributor, please contact Allen customer serviceat 1-800-866-5753.

SAFETY

Safety Recommendations:■ Protect your eyes: always wear safety goggles.■ Maintain all tools in proper working order and never modify a tool from

its original design to accomplish a task for which it was not intended. ■ Always select a tool in the correct size and type for the job to be

accomplished.■ Inspect all tools prior to use and discard those that are damaged or

excessively worn.■ Do not attempt to increase the leverage of any tool with a pipe

extension or other “cheater” device.■ When possible, always pull on a wrench handle rather than push and

adjust your stance to prevent a fall.■ Never hammer on a wrench handle or use a wrench as a striking tool.■ Discard all hammers with a loose or damaged handle and always be

certain that hammer heads are tight on the handle.■ Discard all nut drivers and screwdrivers with split or broken handles.

They cannot be used efficiently and may cause injury.■ Screwdrivers are intended for screw driving only. Do not attempt to

use them as punches, chisels, scrapers or pry bars.■ Discard all chisels or punches with a dull, chipped, defective cutting

edge or point or mushroomed struck face.■ Adjustable wrenches should be tightly adjusted to the nut and pulled

so that the force is on the side of the fixed jaw.■ Chrome finished hand sockets or attachments are designed for use

on manually operated drive tools only and should not be used on power tools. Black Ox™ (black oxide) impact sockets and attachments are designed for use on power tools but may also be used for manual operation.

To learn more about the selection, safety tips and proper use of your Allenhand tools, you can obtain HTI’s Guide to Hand Tools, compliments ofAllen Industrial Hand Tools. Contact your Allen Industrial Distributor, AllenSales Representative, or Allen customer service at 1-800-866-5753.Depending on the quantity ordered, there may be a nominal charge.

CONSUMER • SAFETY • PROTECTION

®

To the industrial tool market, it means quality.In 1910, William G. Allen patented a cold draw-ing process for making hex socket set screwsthat were stronger than any other at the time.These quality fasteners demanded quality tools,so it wasn’t long before the Allen hex wrench

was created. As the business grew, so did Allen’sreputation for uncompromising quality. Today,the makers of the number one hex key in theworld have put nearly a century of experienceinto an industrial hand tool line with the quality,durability and value worthy of the name Allen.

Specially designed fordemanding industrial toolusers.

Our industrial hand tool line is built with Allen-tough features and the strength and durability tostand up to your customers’ daily punishments.

Allen tools offer:• Heavy duty teardrop shaped ratchets with

single hand reversing and lock-on/quick release design, as well as our new round head ratchets which offer superior torque and durability.

• Patented Torque-Wrap® design for superior torque strength and longer ratchet life.

• Exclusive Allendrive® socket and wrench designs for more torque strength with less chance of fastener rounding.

We’ve brought this innovative thinking to a full line of industrial tools. So when your

customers ask for strength, durability, comfort and convenience, you can offer itall in one high-quality, highperformance line from Allen.

AllenTM Industrial Hand Tools

AllenTM Heritage

4

With Allen, you not only get exceptional quality,strength and durability from our extensive prod-uct line, you also get the strength behind thename. In addition to being number one in hexkeys and recognized as the source for industrialhand tools, Allen is also part of America’slargest manufacturer of ratchets, sockets andwrenches, the Danaher Tool Group. Danaherindustrial product lines include some of the mostwell recognized brand names in the industry:

• Armstrong® Industrial Tools

• Jacobs® Drill Chucks and Accessories• Holo-Krome® Socket and Screw Products• K-D® Specialty Tools

This powerful product array gives you a singlesource for one of the industry’s most extensive product offerings. This unique alliance togetherwith world class manufacturing, technology, andtotal customer satisfaction insures that whateveryour customers need, Allen Industrial HandTools can provide the right tool for the job.

When you want an industrial hand tool line withheritage, performance and value, all backed by

outstanding service and support, one nameshould come to mind. Allen.

We’re committed to being business partners.There’s more to the Allen industrial line thantough durable tools. It also includes comprehen-sive service and support. We’ve been dedicatedto the industrial market since 1910 and supportyou with a complete distributor program:

• Experienced direct Allen Area Sales Representatives

• Knowledgeable customer service team

• Comprehensive marketing and support programs

• Dedicated 800 phone and fax ordering numbers for quick response

• Electronic Data Interchange (EDI) is available. For more information, contact our EDI coordinator.

It starts with the latest manufacturing technology and ends with a full lifetime warranty. To make tools that last, we’ve made significantinvestments in CNC machinery and advanced

forming technology. This is how we are able todeliver outstanding quality and consistency atthe most competitive cost. Allen industrial handtools are proudly made in the USA and backedby a full lifetime warranty.

5

AllenTM. The Strength Behind The Name.

AllenTM. When You Expect A Lot From Your Hand Tools.

AllenTM Service Excellence

AllenTM Superior Quality

6

DRIVE TOOLS

Allen ratchets are lab tested and exceed the torquestrength and durability of competitive ratchets. Our newround head ratchets offer the same high performancewith a distinctive industrial finish. Allen ratchets are

available in a full range of sizes and styles.• Drive sizes from 1/4" to 1"• Teardrop, round head and flex head ratchets• Quick release and non-quick release

Patented Torque-Wrap®

design provides greater torque strength and lifetime durability.

Teardrop shape gives better access and strength.

QuickFlip® Reversinglever for easy onehand reversing.

One piece drop forgedalloy steel for superior durability.

Optional lock-on/quick release designsecures socket andprovides easier socketreleasing.

10 degree ratchetingarc for better operationin tight spots.

Nickel-chrome finish provides lifetime corrosion resistance.

Knurled handlefor no-slip grip.

Chamfered openingprovides faster andeasier socket fitover fastener.

Patented Allendrive ®

for higher torque and less chance forfastener rounding.

Thinwallconstructionfor betteraccess to fasteners inlimited areas.

Precision cold formedfor exact, consistentdimensions and greaterstrength.

Ordinary sockets and wrenches contact the fastener at its cor-ners. In high torque situations, this can lead to a rounding of thefastener and tool slippage. Allendrive® tools grip the fasteneracross a broader contact area and allow for greater torque loadswithout tool slippage.

Allen sockets are designed for optimum strength anddurability and manufactured to meet or exceed ANSIand government torque performance specifications.They are available in a full range of fractional and metric sizes.• 6 and 12 point sockets• Standard, deep and universal sockets• Spark plug sockets• Impact sockets• Flex and hex bit sockets

SOCKETS

BLACK OX™Allen now offers its Black Ox™, blackindustrial finish on a full-range of industri-al tools including: ratchets, wrenches andaccessories. Manufactured with the sameprecision and quality found in the entireAllen line, these tools are the ideal choicefor demanding industrial applicationsincluding non-plated requirements.

B L A C K

OXTM

ALLENDRIVE®

TEARDROPNON-QUICK RELEASE RATCHET

12 POINTSOCKET

Nickel-chrome finish provides life-time corrosionresistance.

7

WRENCHES

Nickel-chrome finish provides lifetime corrosionresistance.

Allendrive ® Box End formaximum torque withless chance of fastenerhead rounding.

Chamfered openingallows for faster andeasier fit over fastener.

15 degree offsethandle offers betterknuckle clearance.

AllenGrip® finish providesgreater comfort and lesschance for grip slippage.

Drop forged andthrough hardened alloyis stronger, tougher andlasts longer.

Rotates to 270 degreesto a firm stop for bettertorquing and access.

Heat treated,tempered alloysteel provideshigh strength andresistance torotational distortion.

Specially con-toured handle forbetter feel andcontrol.

Rugged Duracast ®

case providesunmatched durability.

All hex keys are precision formed toexact dimensional tolerances for precise fit.

Hex, Ball End and Torx® make up the most complete line of keyconfigurations available.

Allen professional wrenches are constructed of alloysteel for superior turning power. The line consists of a full range of configurations in fractional sizes from 1/4" to 2 1/2" and in metric sizes from 7mm to 32mm.Allen professional wrenches are available in our newBlack Ox™, black industrial finish as well as in nickel-chrome or full polish finish.• Combination wrenches• Midget combination wrenches

• Open end wrenches• Box end wrenches with 15° offset end• Flare nut wrenches• Adjustable wrenches• Ratcheting box end wrenches• Offset striking wrenches• Adjustable face, pin and hook spanner wrenches• Structural wrenches• Wrench sets

The complete line of Allen professional hex keys andhex key sets are constructed with alloy steel for supe-rior strength. They also feature a black oxide finish forgreater durability. Allen offers the broadest line of hexkeys including:

GENERAL USE TOOLS HEX, BALL END AND TORX®

Allen general use tools are precision manufacturedusing strict quality control processes for long lasting performance and durability. As with all Allenproducts, our general use hand tools feature a lifetime warranty.• Hacksaws• Pliers• Nut drivers

• Screwdrivers • Punches, chisels, bars• Hammers

HEX KEYS

12 POINT COMBINATIONWRENCH

DURACAST®

FOLD-UP

• Duracast® fold-ups• Standard fold-ups• Short arm hex keys• Long arm hex keys• Ball end L-keys• Cushion-grip T-handles

• Plas-T-Key® T-handles• Forged T-handles• Handi hex drivers• Hex key sets• Hex key assortments• Metric hex keys

8

TABLE OF CONTENTS

Safety Information.........................................................3Industrial Tool Sets........................................................9

Industrial Tool Sets .................................................11Add-on Sets.............................................................19Tool Boxes. ..............................................................22

Drive Tools & Sockets (individual items and sets)........231/4"............................................................................253/8"............................................................................321/2"............................................................................523/4"............................................................................631" ...............................................................................68

Wrenches......................................................................71Individual Wrenches...............................................73Wrench Sets............................................................82

Hex Keys & Sets (individual items and sets).................91Fold-ups ...................................................................93Hex Keys..................................................................96T-Handles...............................................................102Handi-Hex Drivers ................................................108Straight Bits...........................................................109Hex Key Assortments...........................................109

General Use Tools & Displays................................111Hacksaws...............................................................113Pliers.......................................................................113Screwdrivers .........................................................115Nut Drivers.............................................................116Punches.................................................................117Chisels....................................................................118Bars ........................................................................119Punch and Chisel Sets.........................................120Hammers...............................................................122Tool Storage ..........................................................123Merchandising Displays.......................................124

K-D® Torque Tools .....................................................131Torque Wrenches .................................................133Torque Screwdrivers ............................................134Torque Angle Gauge.............................................134

K-D® Specialty Tools.................................................135Basic Engine..........................................................137Valve Engine..........................................................139Fuel System Engine..............................................141Filter Wrenches.....................................................142Suspension & Drive Train....................................146Drive Line...............................................................147Ignition & Electrical...............................................148Brake & Wheel......................................................151Cooling & Exhaust................................................158Specialty.................................................................159Feeler Gauges........................................................163Pullers ....................................................................165Snap Rings, Pliers, Tools.....................................167Brushes..................................................................170

Product Index (by item number)..................................173Set Contents Listing (Industrial Tool Sets) .................177Key Fit Selector Charts (fractional and metric)..........186Conversion Chart.......................................................187Metric Information: To facilitate ordering, metric toolsand sets immediately follow their fractional equiva-lents and appear on a green background for easyidentification.

SYMBOLS USED IN THIS CATALOG:

6 Point 12 Point Torx®

INDUSTRIAL TOOL SETS

10

■ IN THIS SECTION: To meet the needs and exceed theexpectations of today’s demandingindustrial tool user, AllenTM now offersits comprehensive selection of indus-trial hand tools in a variety of profes-sional tool sets. From common appli-cations to complex maintenance andrepair, Allen industrial tool sets aredesigned to insure that you alwayshave the right tool for the job.

Our sets are classified according totool selection and are identified asmaster sets, advanced and interme-diate sets, and basic mechanic’s sets;available in either fractional, metric orboth, as indicated. In addition, weoffer a range of add-on sets specifi-cally designed to complement yourexisting Allen industrial hand toolcollection or used as complete sets.

A variety of quality K-D® tools have been specificallychosen to complement some of our industrial toolsets. For a complete selection of K-D products available or to reorder individual items, please refer to the K-D catalog.


11


96 Piece Master SetSet No. 19636Includes:

No. 19804-Roller CabinetNo. 19805-Top ChestApprox. Wt.: 523 lbs

Set No. 19635Tools Only-445 pcs.Approx. Wt.: 196 lbs

Detailed listing of set contents on page 177

447 Piece Fractional / Metric Master Mechanic’s Set (1/4", 3/8", 1/2" & 3/4" Drives)

12


Set No. 19634Includes:

No. 19804-Roller CabinetNo. 19805-Top ChestApprox. Wt.: 492 lbs



307 Piece Master Mechanic’s Set (1/4", 3/8", 1/2" & 3/4" Drives)

13


Set No.19603Includes:

300 pcs. Tools onlyApprox. Wt.: 43.10 lbs


300 Piece Fractional/Metric Master Mechanic’s Set (1/4", 3/8" & 1/2" Drives)

14



No. 19804-Roller CabinetApprox. Wt.: 268 lbs







226 Piece Master Aircraft/Avionics Set (1/4", 3/8" & 1/2" Drives)

226 Piece Advanced Industrial Mechanic’s Set (1/4", 3/8" & 1/2" Drives)

15







No. 19805-Top ChestApprox. Wt.: 232 lbs



181 Piece Industrial Mechanic’s Repair Set (3/8", 1/2" & 3/4" Drives)

199 Piece Metric Master Mechanic’s Set (1/4", 3/8" & 1/2" Drives)

16










159 Piece Heavy Duty Industrial Mechanic’s Set (1/2" & 3/4" Drives)

133 Piece Basic Industrial Mechanic’s Set (1/4", 3/8" & 1/2" Drives)

17



No. 19803-20" Tool BoxApprox. Wt.: 65 lbs







101 Piece General Purpose Industrial Mechanic’s Set (3/8" & 1/2" Drives)

108 Piece Basic Metric Set (3/8" & 1/2" Drives)

18










79 Piece 1/2" Drive Basic Mechanic’s Set


19

96 Piece Master Set






81 Piece 3/4" Drive Heavy Duty Mechanic’s Add-on Set*


Tools - 42 pcs.No. 19803-20" Tool BoxApprox. Wt.: 67 lbs

43 Piece General Purpose Tool Set

* All Allen Add-on Sets may be used as a complete set or to complement another Allen Industrial Tool Set.

Set Contents Listing:6 Pt. 1/4” Dr. Sockets (5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”,3/8”, 7/16”, 1/2”)12 Pt. 1/4” Dr. Sockets (5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”)12 Pt. 3/8” Dr. Metric Sockets (10, 11, 12, 13, 14, 15, 16, 17, 18 mm)6 Pt. 3/8” Dr. Spark Plug Socket3/8” Dr. 3” Extension3/8” Dr. Roundhead Ratchet

3/8” Dr. 3/8” X 1/4” Reducing AdapterCombination Wrenches (3/8”, 7/16”, 1/2”, 9/16”, 5/8”)6” Adjustable Wrench6” Slip Joint Pliers6-1/2” Long Nose PliersPhillips Screwdrivers (#1 X 3, #2 X 4)Roundblade Screwdriver 1/4 X 4

20






74 Piece 3/8" & 1/2" Drives Black Ox™ Industrial Add-on Set*





* All Allen Add-on Sets may be used as a complete set or to complement another Allen Industrial Tool Set.

141 Piece Metric Add-on Set* (1/4", 3/8" & 1/2" Drives)

B L A C K

OXTM

21











See page 185 for a detailed listing of set contents for all above sets.

15 Piece Accessory Set

23 Piece 3/8" Drive Socket Set


22

3 DRAWER UTILITY CHESTItem Number: 19800

Width Depth Height25 15/16" 10 1/6" 11 5/8"Storage Capacity - 2,200 cu inWeight - 42 lbs

6 DRAWER TOP CHESTItem Number: 19805

Width Depth Height29 3/4" 18 1/2" 19 1/2"

Drawer 1-3 6 3/4" 16 1/2" 2 1/2"Drawer 4-6 23 3/8" 17 1/2" 2 1/2"Storage Capacity - 5,081 cu inWeight - 150 lbs

20" TOOL BOXItem Number: 19803

Width Depth Height20" 8 1/2" 9 1/2"

Storage Capacity - 1,615 cu inWeight - 13 lbs

7 DRAWER ROLL A WAY CABINETItem Number: 19804

Width Depth Height29 3/4" 18 1/2" 31 3/4"

Drawer 1-4 23 3/8" 17 1/2" 2 1/2"Drawer 5-7 23 3/8" 17 1/2" 4"Storage Capacity - 9,577 cu inWeight - 175 lbs

TOOL BOXES

DRIVE TOOLS & SOCKETS

24

■ IN THIS SECTION: Our heavy duty line of drive tools, sockets andaccessories are shown in a sequence from 1/4"to 1" drive with the metric equivalents notedwhere available. Product categories are listed inthe following order:

• Ratchets: heavy duty teardrop and round head

• Flex handles

• Speeder handles• Spinners• Extensions• Universal joints• Adapters• Sockets: standard, deep, impact

(available in 6 pt. or 12 pt.) & hex bit • Socket sets

DRIVE TOOLS & SOCKETS

Chamfered openingprovides faster andeasier socket fitover fastener.

Patented Allendrive®

for higher torque and less chance forfastener rounding.

Thinwallconstructionfor betteraccess to fasteners inlimited areas.

Precision cold formedfor exact, consistentdimensions and greaterstrength.

Allendrive®

Socket

Ordinary sockets contact the fastener at its corners. Inhigh torque situations, this can lead to a rounding of thefastener and socket slippage. The Allendrive® socket gripsthe fastener across a broader contact area and allows forgreater torque loads without socket slippage.

Ordinary Socket Allendrive® Socket

Patented Torque-Wrap®

design provides greater torque strength and lifetime durability.

Teardrop shape gives better access and strength.

QuickFlip® Reversinglever for easy onehand reversing.

One piece drop forgedalloy steel for superior durability.

Optional lock-on/quick release designsecures socket andprovides easier socketreleasing.

10 degree ratcheting arcfor better operation intight spots.

Nickel-chrome finish provides lifetime corrosion resistance.

Knurled handle forno-slip grip.

TEARDROPNON-QUICK RELEASE RATCHET

NEW ROUND HEAD RATCHETAllen now offers its new round head ratchet.A cost-effective alternative, the round headratchet provides the same torque strengthand durability as the teardrop shaped rat-chet, with an 8° ratcheting arc for evengreater versatility in tight spots.

All drive tools and sockets are proudly made in the U.S.A. and feature a lifetime warranty.

25

1/4" DRIVE RATCHETS

FLEX HANDLE

Item WeightNumber Length (lbs)10920 5.500 .19

Fed. Std. GGG-W-641e ANSI Spec. B107.10M

1/4" DRIVE ACCESSORIES

ROUND HEAD QUICK RELEASE

Item Weight NumberNumber Length (lbs) of Teeth10904 5.130 .25 4510908 Ratchet Repair Kit for 10904


TEARDROP NON-QUICK RELEASE



TEARDROP QUICK RELEASE



ROUND HEAD NON-QUICK RELEASE



26


ADAPTER

Item Size WeightNumber (Inch) Length (lbs)10925 1/4F x 3/8M 1.000 .12

Fed. Std. GGG-W-641eANSI Spec. B107.10M

EXTENSIONS

Item Size WeightNumber (Inch) (lbs)10902 1.5 .0310905 3 .0610910 6 .12


FLEX SPINNER


UNIVERSAL JOINT


Fed. Std. GGG-W-641eANSI Spec. B107.10M

WOBBLE EXTENSIONS


3 PIECE — WOBBLE EXTENSION SETItem Number: 10914

Item Size WeightNumber (Inch) (lbs)10911 1.5 .0310912 3 .0610913 6 .12Pouch

SPINNER WITH FEMALE DRIVE END



15°

15°

27

1/4" DRIVE SOCKETS

12 PT. — STANDARD SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C (lbs)10202 3/16 .883 .458 .315 .0510203 7/32 .883 .458 .353 .0510204 1/4 .883 .458 .390 .0510205 9/32 .883 .458 .426 .0510206 5/16 .883 .455 .455 .0510207 11/32 .883 .502 .502 .0610208 3/8 .883 .537 .537 .0610209 7/16 .883 .617 .617 .0610210 1/2 .883 .694 .694 .12

Fed. Std. GGG-W-641e ANSI Spec. B107.1

6 PT. — METRIC STANDARD SOCKETS

Item Size Dimensions WeightNumber (mm) A B C (lbs)10102 4 .883 .458 .280 .0310104 5 .883 .458 .315 .0310106 6 .883 .458 .370 .0310107 7 .883 .458 .426 .0310108 8 .883 .458 .455 .0310109 9 .883 .502 .502 .0310110 10 .883 .548 .548 .0310111 11 .883 .617 .617 .0510112 12 .883 .681 .681 .0510113 13 .883 .713 .713 .06



Item Size Dimensions WeightNumber (Inch) A B C (lbs)10021 5/32 .883 .458 .280 .0310022 3/16 .883 .458 .315 .0310023 7/32 .883 .458 .353 .0310024 1/4 .883 .458 .390 .0310025 9/32 .883 .458 .426 .0310026 5/16 .883 .455 .455 .0310027 11/32 .883 .502 .502 .0310028 3/8 .883 .537 .537 .0310029 7/16 .883 .617 .617 .0510030 1/2 .883 .694 .694 .05


A

B

C

A

B

C

28

1/4" DRIVE SOCKETS

6 PT. — DEEP SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C (lbs)10052 3/16 2.010 .453 .315 .0510053 7/32 2.010 .477 .356 .0510054 1/4 2.010 .453 .397 .0510055 9/32 2.010 .453 .438 .0510056 5/16 2.010 .458 .458 .0510057 11/32 2.010 .505 .505 .0610058 3/8 2.010 .540 .540 .0610059 7/16 2.010 .620 .620 .0610060 1/2 2.010 .694 .694 .12


6 PT. — METRIC DEEP SOCKETS

Item Size Dimensions WeightNumber (mm) A B C (lbs)10152 4 2.010 .453 .280 .0510154 5 2.010 .453 .321 .0510156 6 2.010 .453 .374 .0510157 7 2.010 .453 .429 .0510158 8 2.010 .458 .458 .0510159 9 2.010 .505 .505 .0610160 10 2.010 .551 .551 .0610161 11 2.010 .620 .620 .0610162 12 2.010 .681 .681 .1210163 13 2.010 .713 .713 .1210164 14 2.010 .763 .763 .12


A

B

C

TORX® BIT SOCKETS

Item Size Dimensions WeightNumber (Torx) A B (lbs)58900 T-10 1.125 .500 .0358903 T-15 1.125 .500 .0358906 T-20 1.125 .500 .0358909 T-25 1.125 .500 .0358912 T-27 1.125 .500 .0358915 T-30 1.125 .500 .06

Configuration in accordance with CAMCAR® Spec. ANSI Spec. not applicable.Torx® is a registered trademark of CAMCAR, Division of TEXTRON, Inc.

A

B

29

1/4" DRIVE SOCKET SETS

21 PIECE — 1/4" DRIVE METRIC SOCKET SETItem Number: 19015

Number Description Number Description10102 6 Pt. Std. Skt. 4mm10104 6 Pt. Std. Skt. 5mm10106 6 Pt. Std. Skt. 6mm10107 6 Pt. Std. Skt. 7mm10108 6 Pt. Std. Skt. 8mm10109 6 Pt. Std. Skt. 9mm10110 6 Pt. Std. Skt. 10mm10111 6 Pt. Std. Skt. 11mm10112 6 Pt. Std. Skt. 12mm10156 6 Pt. Dp. Skt. 6mm10157 6 Pt. Dp. Skt. 7mm10158 6 Pt. Dp. Skt. 8mm

21 PIECE — 1/4" DRIVE SOCKET SETItem Number: 19011

Number Description Number Description10022 6 Pt. Std. Skt. 3/16"10023 6 Pt. Std. Skt. 7/32"10024 6 Pt. Std. Skt. 1/4"10025 6 Pt. Std. Skt. 9/32"10026 6 Pt. Std. Skt. 5/16"10027 6 Pt. Std. Skt. 11/32"10028 6 Pt. Std. Skt. 3/8"10029 6 Pt. Std. Skt. 7/16"10030 6 Pt. Std. Skt. 1/2"10054 6 Pt. Dp. Skt. 1/4"10055 6 Pt. Dp. Skt.. 9/32"10056 6 Pt. Dp. Skt. 5/16"

10057 6 Pt. Dp. Skt. 11/32"10058 6 Pt. Dp. Skt. 3/8"10059 6 Pt. Dp. Skt. 7/16"10060 6 Pt. Dp. Skt.. 1/2"10905 3" Extension10910 6" Extension10930 Universal Joint10915 Spinner Handle10900 Ratchet Quick Release

Metal BoxTotal Weight 1.75 lb

10159 6 Pt. Dp. Skt. 9mm10160 6 Pt. Dp. Skt. 10mm10161 6 Pt. Dp. Skt. 11mm10162 6 Pt. Dp. Skt. 12mm10902 1 1/2" Extension10910 6" Extension10915 Spinner Handle10930 Universal Joint10900 Ratchet Quick Release


39 PIECE — 1/4" DRIVE FRACTIONAL/METRICSOCKET SETItem Number: 19233

Number Description Number Description10022 6 Pt. Std. Skt. 3/16" 10104 6 Pt. Std. Skt. 5mm 10023 6 Pt. Std. Skt. 7/32" 10106 6 Pt. Std. Skt. 6mm 10024 6 Pt. Std. Skt. 1/4" 10107 6 Pt. Std. Skt. 7mm10025 6 Pt. Std. Skt. 9/32" 10108 6 Pt. Std. Skt. 8mm10026 6 Pt. Std. Skt. 5/16" 10109 6 Pt. Std. Skt. 9mm10027 6 Pt. Std. Skt. 11/32" 10110 6 Pt. Std. Skt. 10mm10028 6 Pt. Std. Skt. 3/8" 10111 6 Pt. Std. Skt. 11mm10029 6 Pt. Std. Skt. 7/16" 10112 6 Pt. Std. Skt. 12mm10030 6 Pt. Std. Skt. 1/2" 10113 6 Pt. Std. Skt. 13mm10052 6 Pt. Dp. Skt. 3/16" 10156 6 Pt. Dp. Skt. 6mm10053 6 Pt. Dp. Skt. 7/32" 10157 6 Pt. Dp. Skt. 7mm10054 6 Pt. Dp. Skt. 1/4" 10158 6 Pt. Dp. Skt. 8mm10055 6 Pt. Dp. Skt. 9/32" 10159 6 Pt. Dp. Skt. 9mm10056 6 Pt. Dp. Skt. 5/16" 10160 6 Pt. Dp. Skt. 10mm10057 6 Pt. Dp. Skt. 11/32" 10161 6 Pt. Dp. Skt. 11mm10058 6 Pt. Dp. Skt. 3/8" 10162 6 Pt. Dp. Skt. 12mm10059 6 Pt. Dp. Skt. 7/16" 10163 6 Pt. Dp. Skt. 13mm10060 6 Pt. Dp. Skt. 1/2" 10164 6 Pt. Dp. Skt. 14mm

High density polyethylene case Total Weight 3.05 lb

Number Description10902 1 1/2" Extension10905 3" Extension10909 Round Head Ratchet

Set now availablewith your choice ofeither teardropratchet or our neweconomical RoundHead Ratchet.

30


14 PIECE — 1/4" DRIVE METRIC SOCKET SETItem Number: 19016 with Quick Release RatchetItem Number: 19019 with Round Head Ratchet

Number Description Number Description10102 6 Pt. Std. Skt. 4mm10104 6 Pt. Std. Skt. 5mm10106 6 Pt. Std. Skt. 6mm10107 6 Pt. Std. Skt. 7mm10108 6 Pt. Std. Skt. 8mm10109 6 Pt. Std. Skt. 9mm10110 6 Pt. Std. Skt. 10mm10111 6 Pt. Std. Skt. 11mm10112 6 Pt. Std. Skt. 12mm

10113 6 Pt. Std. Skt. 13mm10902 1 1/2" Extension10910 6" Extension10915 Spinner Handle10900 Ratchet Quick Release

or10909 Round Head Ratchet



Number Description Number Description10202 12 Pt. Std. Skt. 3/16"10203 12 Pt. Std. Skt. 7/32"10204 12 Pt. Std. Skt. 1/4"10205 12 Pt. Std. Skt. 9/32"10206 12 Pt. Std. Skt. 5/16"10207 12 Pt. Std. Skt. 11/32"10208 12 Pt. Std. Skt. 3/8"10209 12 Pt. Std. Skt. 7/16"

10210 12 Pt. Std. Skt. 1/2"10915 Spinner Handle10902 1/2" Extension10910 6" Extension10900 Ratchet Quick Release



13 PIECE — 1/4" DRIVE SOCKET SETItem Number: 19001 with Quick Release RatchetItem Number: 19009 with Round Head Ratchet

Number Description Number Description10022 6 Pt. Std. Skt. 3/16"10023 6 Pt. Std. Skt. 7/32"10024 6 Pt. Std. Skt. 1/4"10025 6 Pt. Std. Skt. 9/32"10026 6 Pt. Std. Skt. 5/16"10027 6 Pt. Std. Skt. 11/32"10028 6 Pt. Std. Skt. 3/8"10029 6 Pt. Std. Skt. 7/16"10030 6 Pt. Std. Skt. 1/2"

10902 1 1/2" Extension10910 6" Extension10915 Spinner Handle10900 Ratchet Quick Release



31



Number Description Number Description10102 6 Pt. Std. Skt. 4mm10104 6 Pt. Std. Skt. 5mm10106 6 Pt. Std. Skt. 6mm10107 6 Pt. Std. Skt. 7mm10108 6 Pt. Std. Skt. 8mm10109 6 Pt. Std. Skt. 9mm


Number Description Number Description10021 6 Pt. Std. Skt. 5/32"10022 6 Pt. Std. Skt. 3/16"10023 6 Pt. Std. Skt. 7/32"10024 6 Pt. Std. Skt. 1/4"10025 6 Pt. Std. Skt. 9/32"10026 6 Pt. Std. Skt. 5/16"

10027 6 Pt. Std. Skt. 11/32"10028 6 Pt. Std. Skt. 3/8"10029 6 Pt. Std. Skt. 7/16"10030 6 Pt. Std. Skt. 1/2"Socket Rail,packaged in clamshellTotal Weight .75 lb

10110 6 Pt. Std. Skt. 10mm10111 6 Pt. Std. Skt. 11mm10112 6 Pt. Std. Skt. 12mm10113 6 Pt. Std. Skt. 13mmSocket Rail,packaged in clamshellTotal Weight .75 lb

9 PIECE — 1/4" DRIVE DEEP SOCKET SETItem Number: 19014

Number Description Number Description10052 6 Pt. Dp. Skt. 3/16"10053 6 Pt. Dp. Skt. 7/32"10054 6 Pt. Dp. Skt. 1/4"10055 6 Pt. Dp. Skt. 9/32"10056 6 Pt. Dp. Skt. 5/16"10057 6 Pt. Dp. Skt. 11/32"

9 PIECE — 1/4" DRIVE METRIC DEEP SOCKET SETItem Number: 19018

Number Description Number Description10156 6 Pt. Dp. Skt. 6mm10157 6 Pt. Dp. Skt. 7mm10158 6 Pt. Dp. Skt. 8mm10159 6 Pt. Dp. Skt. 9mm10160 6 Pt. Dp. Skt. 10mm10161 6 Pt. Dp. Skt. 11mm



10058 6 Pt. Dp. Skt. 3/8"10059 6 Pt. Dp. Skt. 7/16"10060 6 Pt. Dp. Skt. 1/2"

Socket RailTotal Weight .68 lb

10162 6 Pt. Dp. Skt. 12mm10163 6 Pt. Dp. Skt. 13mm10164 6 Pt. Dp. Skt. 14mm


10208 12 Pt. Std. Skt. 3/8"10209 12 Pt. Std. Skt. 7/16"10210 12 Pt. Std. Skt. 1/2"


32




ROUND HEAD NON–QUICK RELEASE


B L A C K

OXTM

TEARDROP NON-QUICK RELEASE — BLACK

Item Weight NumberNumber Length (lbs) of Teeth11901B 7.625 .69 3611907 Ratchet Repair Kit for 11901B





TEAR DROP QUICK RELEASE



TEAR DROP QUICK RELEASE FLEX HEAD



3/8" DRIVE RATCHETS

33

FLEX HANDLE



B L A C K

OXTM

FLEX HANDLE — BLACK

Item WeightNumber Length (lbs)11920B 9.500 .63Fed. Std. GGG-W-641e ANSI Spec. B107.10M


EXTENSIONS

Item Size WeightNumber (Inch) (lbs)11902 1.5 .1211905 3 .1911910 6 .3111912 10.5 .5011915 20 .88

SPEEDER HANDLE

Item WeightNumber Length (lbs)11926 15.500 1.00

LOCKING EXTENSIONS

Item Size WeightNumber (Inch) (lbs)11916 5 .2811917 8 .4311918 12 .62

3 PIECE — 3/8" DRIVE LOCKING EXTENSION SETItem Number: 11919

Number Description11916 3/8" Dr. Extension 5"11917 3/8" Dr. Extension 8"11918 3/8" Dr. Extension 12"

Pouch Total Weight 1.25 lb

34


ADAPTERS

Item Size WeightNumber (inch) Length (lbs)11925 3/8F x 1/2M 1.405 .1211927 3/8F x 1/4M 1.000 .06

UNIVERSAL JOINT


EXTENSIONS — BLACK

Item Size WeightNumber (Inch) (lbs)11905B 3 .1911910B 6 .3111912B 10 .51

B L A C K

OXTM

3 PIECE — WOBBLE EXTENSION SETItem Number: 11921

Item Size WeightNumber (Inch) (lbs)11909 1.5 .1211911 3 .1911914 6 .31Pouch

15°

WOBBLE EXTENSION


15°


Item Size Dimensions WeightNumber (Inch) A B C (lbs)11004 1/4 .945 .662 .390 .0311006 5/16 .945 .662 .460 .0611008 3/8 .945 .664 .568 .0611009 7/16 .945 .661 .661 .0611010 1/2 .975 .703 .703 .0611011 9/16 .975 .779 .779 .0611012 5/8 1.020 .851 .851 .0611013 11/16 1.020 .925 .925 .1211014 3/4 1.135 1.002 1.002 .1211015 13/16 1.135 1.085 1.085 .12


35

IMPACT EXTENSIONS


IMPACT ADAPTER

Item Size WeightNumber (Inch) Length (lbs)34208 3/8F x 1/2M .625 .09

UNIVERSAL IMPACT


B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM


3/8" DRIVE SOCKETS

A

B

C

Item Size Dimensions WeightNumber (mm) A B C (lbs)12115 15 .975 .803 .803 .0612116 16 1.020 .851 .851 .0612117 17 1.020 .909 .909 .0612118 18 1.135 .936 .936 .0612119 19 1.135 1.002 1.002 .1212120 20 1.135 1.085 1.085 .1212121 21 1.205 1.133 1.133 .1212122 22 1.205 1.181 1.181 .12



Item Size Dimensions WeightNumber (mm) A B C (lbs)12106 6 .945 .662 .370 .0512107 7 .945 .662 .412 .0512108 8 .945 .662 .460 .0612109 9 .945 .664 .516 .0612110 10 .945 .664 .591 .0612111 11 .945 .659 .659 .1212112 12 .975 .687 .687 .1212113 13 .975 .703 .703 .1212114 14 .975 .763 .763 .06

36

3/8" DRIVE SOCKETS


Item Size Dimensions WeightNumber (mm) A B C (lbs)11309 9 .945 .664 .516 .0311310 10 .945 .664 .519 .0511311 11 .945 .659 .659 .0511312 12 .975 .687 .687 .0511313 13 .975 .703 .703 .0611314 14 .975 .763 .763 .0611315 15 .975 .803 .803 .0611316 16 1.020 .851 .851 .0611317 17 1.020 .909 .909 .0611318 18 1.135 .936 .936 .0611319 19 1.135 1.002 1.002 .1211321 21 1.135 1.068 1.068 .12



Item Size Dimensions WeightNumber (Inch) A B C (lbs)11206 5/16 .945 .662 .460 .0311208 3/8 .945 .664 .568 .0611209 7/16 .945 .664 .664 .0611210 1/2 .975 .703 .703 .0611211 9/16 .975 .779 .779 .0611212 5/8 1.020 .851 .851 .0611213 11/16 1.020 .925 .925 .1211214 3/4 1.135 1.002 1.002 .1211215 13/16 1.135 1.085 1.085 .1211216 7/8 1.205 1.186 1.186 .12



Item Size Dimensions WeightNumber (Inch) A B C (lbs)11058 3/8 2.513 .667 .667 .1211059 7/16 2.513 .662 .662 .1211060 1/2 2.513 .706 .706 .1211061 9/16 2.513 .786 .786 .1211062 5/8 2.513 .870 .870 .1911063 11/16 2.513 .925 .925 .1911064 3/4 2.513 1.002 1.002 .2511065 13/16 2.526 1.085 1.085 .2511066 7/8 2.526 1.186 1.186 .31



Item Size Dimensions WeightNumber (mm) A B C (lbs)11159 9 2.513 .667 .516 .1211160 10 2.513 .667 .591 .1211161 11 2.513 .687 .659 .1211162 12 2.513 .687 .687 .1211163 13 2.513 .736 .736 .1211164 14 2.513 .763 .763 .1211165 15 2.513 .803 .803 .1911166 16 2.513 .870 .870 .1911167 17 2.513 .909 .909 .1911168 18 2.513 .936 .936 .1911169 19 2.513 1.002 1.002 .25


A

B

C

A

B

C

6 PT. — METRIC UNIVERSAL SOCKETS

Item Size Dimensions WeightNumber (mm) A B C (lbs)11560 10 1.852 .753 .753 .1211561 11 1.852 .753 .753 .1211562 12 1.891 .753 .753 .1211563 13 1.891 .753 .753 .1211564 14 1.931 .753 .797 .1211565 15 2.009 .753 .844 .1211566 16 2.009 .753 .877 .1211567 17 2.049 .753 .945 .1211568 18 2.088 .753 .999 .1211569 19 2.128 .753 1.035 .12


6 PT. — UNIVERSAL SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C (lbs)11508 3/8 1.813 .753 .753 .1211509 7/16 1.843 .753 .753 .1211510 1/2 1.875 .753 .753 .1211511 9/16 1.969 .753 .797 .1211512 5/8 2.094 .753 .877 .1211513 11/16 2.172 .753 .945 .1211514 3/4 2.234 .753 1.035 .12


37

3/8" DRIVE SOCKETS


Item Size Dimensions WeightNumber (mm) A B C (lbs)11359 9 2.513 .667 .516 .1211360 10 2.513 .667 .591 .1211361 11 2.513 .659 .659 .1211362 12 2.513 .687 .687 .1211363 13 2.513 .706 .706 .1211364 14 2.513 .786 .786 .1211365 15 2.513 .803 .803 .1911366 16 2.513 .870 .870 .1911367 17 2.513 .909 .909 .1911368 18 2.513 .936 .936 .1911369 19 2.513 1.002 1.002 .25



Item Size Dimensions WeightNumber (Inch) A B C (lbs)11258 3/8 2.513 .667 .568 .1211259 7/16 2.513 .664 .664 .1211260 1/2 2.513 .706 .706 .1211261 9/16 2.513 .786 .786 .1211262 5/8 2.513 .870 .870 .1911263 11/16 2.513 .925 .925 .1911264 3/4 2.513 1.002 1.002 .2511265 13/16 2.526 1.085 1.085 .2511266 7/8 2.526 1.186 1.186 .31


A

B

C

A

B

C

38

3/8" DRIVE SOCKETS

TORX® BIT SOCKETS

Item Size Dimensions WeightNumber (Torx) A B (lbs)58918 T-40 1.625 .750 .0658921 T-45 1.625 .750 .0658924 T-50 1.625 .750 .06Torx® is a registered trademark of CAMCAR, Division of TEXTRON, Inc.

6 PT. — REGULAR SPARK PLUG SOCKETS

Item Size WeightNumber (Inch) Length (lbs)11412 5/8 2.478 .1911415 13/16 2.510 .31


A

B

HEX BIT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B (lbs)58800 7/64 2.071 .690 .0358802 1/8 2.071 .690 .0358804 9/64 2.071 .690 .0358806 5/32 2.071 .690 .0358808 3/16 2.071 .690 .0358810 7/32 2.071 .690 .0358812 1/4 2.920 .940 .0558814 5/16 2.920 .940 .0558815 3/8 2.920 .940 .06

METRIC HEX BIT SOCKETS

Item Size Dimensions WeightNumber (mm) A B (lbs)58672 2 2.071 .690 .0358674 2.5 2.071 .690 .0358676 3 2.071 .690 .0358678 4 2.071 .690 .0358680 5 2.071 .690 .0558682 6 2.071 .690 .0558684 8 2.071 .690 .0658686 10 2.091 .690 .06

A

B

39

3/8" DRIVE SOCKETS

6 PT. — METRIC STANDARD IMPACT SOCKETS

Item Size Dimensions WeightNumber (mm) A B C D (lbs)34108 8 1.102 0.693 .701 0.197 .1934109 9 1.102 0.693 .701 0.197 .1934110 10 1.102 0.693 .701 0.197 .1934111 11 1.102 0.693 .701 0.236 .1934112 12 1.102 0.736 .775 0.315 .1934113 13 1.102 0.783 .805 0.354 .1934114 14 1.102 0.858 .808 0.354 .2534115 15 1.102 0.878 .854 0.433 .2534116 16 1.102 0.933 .910 0.433 .2534117 17 1.102 0.957 .974 0.433 .2534118 18 1.102 1.008 1.019 0.472 .2534119 19 1.181 1.047 1.045 0.512 .31

6 PT. — STANDARD IMPACT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)34006 5/16 1.102 0.693 .702 0.157 .1934008 3/8 1.102 0.693 .702 0.197 .1934009 7/16 1.102 0.693 .702 0.236 .1934010 1/2 1.102 0.783 .808 0.276 .1934011 9/16 1.102 0.858 .854 0.315 .2534012 5/8 1.102 0.933 .910 0.354 .2534013 11/16 1.102 1.008 .963 0.354 .2534014 3/4 1.102 1.047 1.045 0.394 .31

A

B

C

D

B L A C K

OXTM

6 PT. — DEEP IMPACT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)34056 5/16 2.480 0.697 .701 0.315 .1934058 3/8 2.480 0.697 .701 0.394 .1934059 7/16 2.480 0.697 .701 0.433 .1934060 1/2 2.480 0.783 .808 0.512 .1934061 9/16 2.480 0.858 .854 0.512 .2534062 5/8 2.480 0.933 .963 0.591 .2534063 11/16 2.480 1.008 1.019 0.591 .2534064 3/4 2.480 1.047 1.084 0.787 .31

6 PT. — METRIC DEEP IMPACT SOCKETS

Item Size Dimensions WeightNumber (mm) A B C D (lbs)34157 7 2.480 0.697 .482 0.276 .1234158 8 2.480 0.697 .506 0.354 .1234159 9 2.480 0.697 .590 0.394 .1334160 10 2.480 0.697 .639 0.492 .1334161 11 2.480 0.697 .701 0.492 .1334162 12 2.480 0.736 .733 0.492 .1434163 13 2.480 0.783 .808 0.531 .1834164 14 2.480 0.858 .808 0.531 .1834165 15 2.480 0.878 .854 0.591 .2034166 16 2.480 0.933 .910 0.591 .2134167 17 2.480 0.957 .963 0.591 .2334168 18 2.480 1.008 1.019 0.787 .2634169 19 2.480 1.047 1.068 0.787 .31

A

B

C

D

B L A C K

OXTM

40

1/4", 3/8" & 1/2" DRIVE SOCKET SETS

107 PIECE — 1/4", 3/8" & 1/2" DRIVE FRACTIONAL/METRIC SOCKET SETItem Number: 19222

Number Description Number Description10021 6 Pt. 1/4" Dr. Std. Skt. 5/32" 11266 12 Pt. 3/8" Dr. Dp. Skt. 7/8"10022 6 Pt. 1/4" Dr. Std. Skt. 3/16" 11310 12 Pt. 3/8" Dr. Std. Skt. 10mm10023 6 Pt. 1/4" Dr. Std. Skt. 7/32" 11311 12 Pt. 3/8" Dr. Std. Skt. 11mm10024 6 Pt. 1/4" Dr. Std. Skt. 1/4" 11312 12 Pt. 3/8" Dr. Std. Skt. 12mm10025 6 Pt. 1/4" Dr. Std. Skt. 9/32" 11313 12 Pt. 3/8" Dr. Std. Skt. 13mm10026 6 Pt. 1/4" Dr. Std. Skt. 5/16" 11314 12 Pt. 3/8" Dr. Std. Skt. 14mm10027 6 Pt. 1/4" Dr. Std. Skt. 11/32" 11315 12 Pt. 3/8" Dr. Std. Skt. 15mm10028 6 Pt. 1/4" Dr. Std. Skt. 3/8" 11316 12 Pt. 3/8" Dr. Std. Skt. 16mm10029 6 Pt. 1/4" Dr. Std. Skt. 7/16" 11317 12 Pt. 3/8" Dr. Std. Skt. 17mm10030 6 Pt. 1/4" Dr. Std. Skt. 1/2" 11318 12 Pt. 3/8" Dr. Std. Skt. 18mm10052 6 Pt. 1/4" Dr. Dp. Skt. 3/16" 11319 12 Pt. 3/8" Dr. Std. Skt. 19mm10053 6 Pt. 1/4" Dr. Dp. Skt. 7/32" 11360 12 Pt. 3/8" Dr. Dp. Skt. 10mm10054 6 Pt. 1/4" Dr. Dp. Skt. 1/4" 11361 12 Pt. 3/8" Dr. Dp. Skt. 11mm10055 6 Pt. 1/4" Dr. Dp. Skt. 9/32" 11362 12 Pt. 3/8" Dr. Dp. Skt. 12mm10056 6 Pt. 1/4" Dr. Dp. Skt. 5/16" 11363 12 Pt. 3/8" Dr. Dp. Skt. 13mm10057 6 Pt. 1/4" Dr. Dp. Skt. 11/32" 11364 12 Pt. 3/8" Dr. Dp. Skt. 14mm10058 6 Pt. 1/4" Dr. Dp. Skt. 3/8" 11365 12 Pt. 3/8" Dr. Dp. Skt. 15mm10059 6 Pt. 1/4" Dr. Dp. Skt. 7/16" 11366 12 Pt. 3/8" Dr. Dp. Skt. 16mm10102 6 Pt. 1/4" Dr. Std. Skt. 4mm 11367 12 Pt. 3/8" Dr. Dp. Skt. 17mm10104 6 Pt. 1/4" Dr. Std. Skt. 5mm 11368 12 Pt. 3/8" Dr. Dp. Skt. 18mm10106 6 Pt. 1/4" Dr. Std. Skt. 6mm 11369 12 Pt. 3/8" Dr. Dp. Skt. 19mm10107 6 Pt. 1/4" Dr. Std. Skt. 7mm 12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"10108 6 Pt. 1/4" Dr. Std. Skt. 8mm 12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"10109 6 Pt. 1/4" Dr. Std. Skt. 9mm 12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"10110 6 Pt. 1/4" Dr. Std. Skt. 10mm 12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"10111 6 Pt. 1/4" Dr. Std. Skt. 11mm 12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"10112 6 Pt. 1/4" Dr. Std. Skt. 12mm 12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"10113 6 Pt. 1/4" Dr. Std. Skt. 13mm 12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"10152 6 Pt. 1/4" Dr. Dp. Skt. 4mm 12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"10154 6 Pt. 1/4" Dr. Dp. Skt. 5mm 12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2" 10156 6 Pt. 1/4" Dr. Dp. Skt. 6mm 12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"10157 6 Pt. 1/4" Dr. Dp. Skt. 7mm 12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8" 10158 6 Pt. 1/4" Dr. Dp. Skt. 8mm 12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"10159 6 Pt. 1/4" Dr. Dp. Skt. 9mm 12318 12 Pt. 1/2" Dr. Std. Skt. 18mm10160 6 Pt. 1/4" Dr. Dp. Skt. 10mm 12319 12 Pt. 1/2" Dr. Std. Skt. 19mm10161 6 Pt. 1/4" Dr. Dp. Skt. 11mm 12320 12 Pt. 1/2" Dr. Std. Skt. 20mm11208 12 Pt. 3/8" Dr. Std. Skt. 3/8" 12321 12 Pt. 1/2" Dr. Std. Skt. 21mm11209 12 Pt. 3/8" Dr. Std. Skt. 7/16" 12322 12 Pt. 1/2" Dr. Std. Skt. 22mm11210 12 Pt. 3/8" Dr. Std. Skt. 1/2" 10905 1/4" Dr. 3" Extension11211 12 Pt. 3/8" Dr. Std. Skt. 9/16" 10915 1/4" Dr. Spinner Handle11212 12 Pt. 3/8" Dr. Std. Skt. 5/8" 10909 1/4" Dr. Round Head Ratchet11213 12 Pt. 3/8" Dr. Std. Skt. 11/16" 11412 6 Pt. 3/8" Dr. Spk. Plg. Skt. 5/8"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4" 11415 6 Pt. 3/8" Dr. Spk. Plg. Skt. 13/16"11215 12 Pt. 3/8" Dr. Std. Skt. 13/16" 11905 3/8" Dr. 3" Extension11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8" 11913 3/8" Dr. Round Head Ratchet11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16" 11927 3/8" Dr. Adapter 3/8"F-1/4"M11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2" 12805 1/2" Dr. 3" Extension11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16" 12811 1/2" Dr. Round Head Ratchet11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8" 56004 7 Pc. Hex Key Set11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16" High density polyethylene case11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4" Total Weight 17.30 lb11265 12 Pt. 3/8" Dr. Dp. Skt 13/16"

41

1/4", 3/8" & 1/2" DRIVE SOCKET SETS

85 PIECE — 1/4" & 3/8" DRIVE FRACTIONAL/METRIC SOCKET SETItem Number: 19144

Number Description Number Description10021 6 Pt. 1/4" Dr. Std. Skt. 5/32" 11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"10022 6 Pt. 1/4" Dr. Std. Skt. 3/16" 11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32" 11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4" 11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32" 11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16" 11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32" 11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8" 11265 12 Pt. 3/8" Dr. Dp. Skt. 13/16"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16" 11266 12 Pt. 3/8" Dr. Dp. Skt. 7/8"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2" 11310 12 Pt. 3/8" Dr. Std. Skt. 10mm10052 6 Pt. 1/4" Dr. Dp. Skt. 3/16" 11311 12 Pt. 3/8" Dr. Std. Skt. 11mm10053 6 Pt. 1/4" Dr. Dp. Skt. 7/32" 11312 12 Pt. 3/8" Dr. Std. Skt. 12mm10054 6 Pt. 1/4" Dr. Dp. Skt. 1/4" 11313 12 Pt. 3/8" Dr. Std. Skt. 13mm10055 6 Pt. 1/4" Dr. Dp. Skt. 9/32" 11314 12 Pt. 3/8" Dr. Std. Skt. 14mm10056 6 Pt. 1/4" Dr. Dp. Skt. 5/16" 11315 12 Pt. 3/8" Dr. Std. Skt. 15mm10057 6 Pt. 1/4" Dr. Dp. Skt. 11/32" 11316 12 Pt. 3/8" Dr. Std Skt. 16mm10058 6 Pt. 1/4" Dr. Dp. Skt. 3/8" 11317 12 Pt. 3/8" Dr. Std Skt. 17mm10059 6 Pt. 1/4" Dr. Dp. Skt. 7/16" 11318 12 Pt. 3/8" Dr. Std Skt. 18mm10102 6 Pt. 1/4" Dr. Std. Skt. 4mm 11319 12 Pt. 3/8" Dr. Std Skt. 19mm10104 6 Pt. 1/4" Dr. Std. Skt. 5mm 11360 12 Pt. 3/8" Dr. Dp. Skt. 10mm10106 6 Pt. 1/4" Dr. Std. Skt. 6mm 11361 12 Pt. 3/8" Dr. Dp. Skt. 11mm10107 6 Pt. 1/4" Dr. Std. Skt. 7mm 11362 12 Pt. 3/8" Dr. Dp. Skt. 12mm10108 6 Pt. 1/4" Dr. Std. Skt. 8mm 11363 12 Pt. 3/8" Dr. Dp. Skt. 13mm10109 6 Pt. 1/4" Dr. Std. Skt. 9mm 11364 12 Pt. 3/8" Dr. Dp. Skt. 14mm10110 6 Pt. 1/4" Dr. Std. Skt. 10mm 11365 12 Pt. 3/8" Dr. Dp. Skt. 15mm10111 6 Pt. 1/4" Dr. Std. Skt. 11mm 11366 12 Pt. 3/8" Dr. Dp. Skt. 16mm10112 6 Pt. 1/4" Dr. Std. Skt. 12mm 11367 12 Pt. 3/8" Dr. Dp. Skt. 17mm10113 6 Pt. 1/4" Dr. Std. Skt. 13mm 11368 12 Pt. 3/8" Dr. Dp. Skt. 18mm10156 6 Pt. 1/4" Dr. Dp. Skt. 6mm 11369 12 Pt. 3/8" Dr. Dp. Skt. 19mm10157 6 Pt. 1/4" Dr. Dp. Skt. 7mm 10905 3" Extension10158 6 Pt. 1/4" Dr. Dp. Skt. 8mm 10915 1/4" Dr. Spinner Handle10159 6 Pt. 1/4" Dr. Dp. Skt. 9mm 10909 1/4" Dr. Round Head Ratchet10160 6 Pt. 1/4" Dr. Dp. Skt. 10mm 11412 6 Pt. 3/8" Dr. Spk. Plg. Skt. 5/8"11208 12 Pt. 3/8" Dr. Std. Skt. 3/8" 11415 6 Pt. 3/8" Dr. Spk. Plg. Skt. 3/16"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16" 11905 3" Extension11210 12 Pt. 3/8" Dr. Std. Skt. 1/2" 11913 3/8" Dr. Round Head Ratchet11211 12 Pt. 3/8" Dr. Std. Skt. 9/16" 11927 3/8" Dr. Adapter 3/8"F-1/4"M11212 12 Pt. 3/8" Dr. Std. Skt. 5/8" 56004 7 Pc. Hex Key Set11213 12 Pt. 3/8" Dr. Std. Skt. 11/16" High density polyethylene case11214 12 Pt. 3/8" Dr. Std. Skt. 3/4" Total Weight 12.30 lb 11215 12 Pt. 3/8" Dr. Std. Skt. 13/16"

42

1/4" & 3/8" DRIVE SOCKET SETS


Number Description Number Description10021 6 Pt. 1/4" Dr. Std. Skt. 5/32"10022 6 Pt. 1/4" Dr. Std. Skt. 3/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2"10102 6 Pt. 1/4" Dr. Metric Std.

Skt. 4mm10104 6 Pt. 1/4" Dr. Metric Std.









Skt. 13mm11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11215 12 Pt. 3/8" Dr. Std. Skt. 13/16"11258 12 Pt. 3/8" Dr. Dp.

Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2" 11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11309 12 Pt. 3/8" Dr. Metric Std.


Skt. 10mm

11311 12 Pt. 3/8" Dr. Metric Std. Skt. 11mm








11412 6 Pt. 3/8" Dr. Std. Spark Plug Skt. 5/8"

10902 1/4" Dr. Extension 1 1/2"10915 1/4" Dr. Spinner Handle10901 1/4" Dr. Teardrop Ratchet11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11927 3/8" Dr. Adapter 3/8" F-1/4"M11901 3/8" Dr. Teardrop Ratchet29022 5 Pc. Combination

Wrench Set56384 6 Pc. Duracast® Hex Key/

Screwdriver Fold-up57002 Short Arm Hex Key .02857004 Short Arm Hex Key .03557006 Short Arm Hex Key .05057008 Short Arm Hex Key 1/16"57010 Short Arm Hex Key 5/64"57012 Short Arm Hex Key 3/32"57013 Short Arm Hex Key 7/64"57014 Short Arm Hex Key 1/8"57018 Short Arm Hex Key 9/64"57020 Short Arm Hex Key 5/32"57022 Short Arm Hex Key 3/16"57024 Short Arm Hex Key 7/32"57026 Short Arm Hex Key 1/4"57028 Short Arm Hex Key 5/16"57030 Short Arm Hex Key 3/8"High density polyethylene caseTotal Weight 7.6 lb

43



Number Description Number Description10021 6 Pt. 1/4" Dr. Std. Skt. 5/32"10022 6 Pt. 1/4" Dr. Std. Skt. 3/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2"10102 6 Pt. 1/4" Dr. Metric

Std. Skt. 4mm10104 6 Pt. 1/4" Dr. Metric

Std. Skt. 5mm10106 6 Pt. 1/4" Dr. Metric Std.

Skt. 6mm10107 6 Pt. 1/4" Dr. Metric






Std. Skt. 12 mm10113 6 Pt. 1/4" Dr. Metric

Std. Skt. 13mm11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11215 12 Pt. 3/8" Dr. Std. Skt. 13/16"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"

11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11309 12 Pt. 3/8" Dr. Metric










Std. Skt. 19mm11412 6 Pt. 3/8" Drive

Spark Plug Socket 5/8"10915 1/4" Dr. Spinner Handle10902 1/4" Dr. Extension 1 1/2"11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11927 3/8" Dr. Adapter 3/8"F - 1/4"M11901 3/8" Dr. Teardrop Ratchet 57010 Short Arm Hex Key 5/64"57012 Short Arm Hex Key 3/32" 57014 Short Arm Hex Key 1/8"57020 Short Arm Hex Key 5/32"57022 Short Arm Hex Key 3/16"57024 Short Arm Hex Key 7/32"57026 Short Arm Hex Key 1/4"

High density polyethylene case Total Weight 6.52 lb

44



Number Description Number Description10021 6 Pt. 1/4" Dr. Std. Skt. 5/32" 11314 12 Pt. 3/8" Dr. Std. Skt. 14mm10022 6 Pt. 1/4" Dr. Std. Skt. 3/16" 11315 12 Pt. 3/8" Dr. Std. Skt. 15mm10023 6 Pt. 1/4" Dr. Std. Skt. 7/32" 11316 12 Pt. 3/8" Dr. Std Skt 16mm10024 6 Pt. 1/4" Dr. Std. Skt. 1/4" 11317 12 Pt. 3/8" Dr. Std Skt 17mm10025 6 Pt. 1/4" Dr. Std. Skt. 9/32" 11318 12 Pt. 3/8" Dr. Std Skt 18mm10026 6 Pt. 1/4" Dr. Std. Skt. 5/16" 11412 6 Pt. 3/8" Dr. Spk. Plg. Skt. 5/8"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32" 11905 3/8" Dr. 3" Extension10028 6 Pt. 1/4" Dr. Std. Skt. 3/8" 11913 3/8" Dr. Round Head Ratchet10029 6 Pt. 1/4" Dr. Std. Skt. 7/16" 11927 3/8" Dr. Adapter 3/8"F-1/4"M10030 6 Pt. 1/4" Dr. Std. Skt. 1/2" 20208 12 Pt. Combo Wr. 3/8"11206 12 Pt. 3/8" Dr. Std. Skt. 5/16" 20209 12 Pt. Combo Wr. 7/16"11208 12 Pt. 3/8" Dr. Std. Skt. 3/8" 20210 12 Pt. Combo Wr. 1/2"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16" 20211 12 Pt. Combo Wr. 9/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2" 20212 12 Pt. Combo Wr. 5/8"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16" 24006 6" Adjustable Wrench11212 12 Pt. 3/8" Dr. Std. Skt. 5/8" 25106 6" Slip Joint Pliers11213 12 Pt. 3/8" Dr. Std. Skt. 11/16" 25206 6 1/2" Long Nose Pliers11214 12 Pt. 3/8" Dr. Std. Skt. 3/4" 30836 #1 x 3" Phillips Screwdriver11310 12 Pt. 3/8" Dr. Std. Skt. 10mm 30837 #2 x 4" Phillips Screwdriver11311 12 Pt. 3/8" Dr. Std. Skt. 11mm 30839 1/4" x 4" Round Blade 11312 12 Pt. 3/8" Dr. Std. Skt. 12mm Screwdriver11313 12 Pt. 3/8" Dr. Std. Skt. 13mm High density polyethylene case

Total Weight 7.90 lb


Number Description Number Description10021 6 Pt. 1/4" Dr. Std. Skt. 5/32" 11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"10022 6 Pt. 1/4" Dr. Std. Skt. 3/16" 11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32" 11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4" 11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32" 11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16" 11310 12 Pt. 3/8" Dr. Std. Skt. 10mm10027 6 Pt. 1/4" Dr. Std. Skt. 11/32" 11311 12 Pt. 3/8" Dr. Std. Skt. 11mm10028 6 Pt. 1/4" Dr. Std. Skt. 3/8" 11312 12 Pt. 3/8" Dr. Std. Skt. 12mm10102 6 Pt. 1/4" Dr. Std. Skt. 4mm 11313 12 Pt. 3/8" Dr. Std. Skt. 13mm10104 6 Pt. 1/4" Dr. Std. Skt. 5mm 11314 12 Pt. 3/8" Dr. Std. Skt. 14mm10106 6 Pt. 1/4" Dr. Std. Skt. 6mm 11315 12 Pt. 3/8" Dr. Std. Skt. 15mm10107 6 Pt. 1/4" Dr. Std. Skt. 7mm 11317 12 Pt. 3/8" Dr. Std Skt. 17mm10108 6 Pt. 1/4" Dr. Std. Skt. 8mm 11318 12 Pt. 3/8" Dr. Std Skt 18mm10109 6 Pt. 1/4" Dr. Std. Skt. 9mm 11319 12 Pt. 3/8" Dr. Std Skt 19mm10110 6 Pt. 1/4" Dr. Std. Skt. 10mm 10915 1/4" Dr. Spinner Handle11208 12 Pt. 3/8" Dr. Std. Skt. 3/8" 11412 6 Pt. 3/8" Dr. Spk. Plg. Skt. 5/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16" 11905 3/8" Dr. 3" Extension11210 12 Pt. 3/8" Dr. Std. Skt. 1/2" 11913 3/8" Dr. Round Head Ratchet11211 12 Pt. 3/8" Dr. Std. Skt. 9/16" 11927 3/8" Dr. Adapter 3/8"F-1/4"M11212 12 Pt. 3/8" Dr. Std. Skt. 5/8" Zipper case11213 12 Pt. 3/8" Dr. Std. Skt. 11/16" Total Weight 4.0 lb11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"

45




Number Description Number Description11004 6 Pt. Std. Skt. 1/4"11006 6 Pt. Std. Skt. 5/16"11008 6 Pt. Std. Skt. 3/8"11009 6 Pt. Std. Skt. 7/16"11010 6 Pt. Std. Skt. 1/2"11011 6 Pt. Std. Skt. 9/16"11012 6 Pt. Std. Skt. 5/8"11013 6 Pt. Std. Skt. 11/16"11014 6 Pt. Std. Skt. 3/4"11015 6 Pt. Std. Skt. 13/16"11058 6 Pt. Dp. Skt. 3/8"11059 6 Pt. Dp. Skt. 7/16"11060 6 Pt. Dp. Skt. 1/2"

11061 6 Pt. Dp. Skt. 9/16"11062 6 Pt. Dp. Skt. 5/8"11063 6 Pt. Dp. Skt. 11/16"11064 6 Pt. Dp. Skt. 3/4"11065 6 Pt. Dp. Skt. 13/16"11066 6 Pt. Dp. Skt. 7/8"11412 6 Pt. Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11913 Round Head Ratchet

High density polyethylene case


23 PIECE — 1/4" & 3/8" DRIVE SOCKET SETItem Number: 19111 with Quick Release RatchetItem Number: 19139 with Round Head Ratchet

Number Description Number Description10022 6 Pt. Std. Skt. 3/16"10023 6 Pt. Std. Skt. 7/32"10024 6 Pt. Std. Skt. 1/4"10025 6 Pt. Std. Skt. 9/32"10026 6 Pt. Std. Skt. 5/16"10027 6 Pt. Std. Skt. 11/32"10028 6 Pt. Std. Skt. 3/8"10029 6 Pt. Std. Skt. 7/16"10030 6 Pt. Std. Skt. 1/2"11211 12 Pt. Std. Skt. 9/16"11212 12 Pt. Std. Skt. 5/8"11213 12 Pt. Std. Skt. 11/16"11214 12 Pt. Std. Skt. 3/4"11215 12 Pt. Std. Skt. 13/16"

11216 12 Pt. Std. Skt. 7/8"11259 12 Pt. Dp. Skt. 7/16"11260 12 Pt. Dp. Skt. 1/2"11261 12 Pt. Dp. Skt. 9/16"11412 Spark Plug Skt. 5/8" 11905 3" Extension11910 6" Extension11927 3/8" Dr. Adapter

3/8"F - 1/4"M11900 Ratchet Quick Release





Number Description Number Description11310 12 Pt. Std. Skt. 10mm11311 12 Pt. Std. Skt. 11mm11312 12 Pt. Std. Skt. 12mm11313 12 Pt. Std. Skt. 13mm11314 12 Pt. Std. Skt. 14mm11315 12 Pt. Std. Skt. 15mm11316 12 Pt. Std. Skt. 16mm11317 12 Pt. Std. Skt. 17mm11318 12 Pt. Std. Skt. 18mm11319 12 Pt. Std. Skt. 19mm11360 12 Pt. Dp. Skt. 10mm11361 12 Pt. Dp. Skt. 11mm

11362 12 Pt. Dp. Skt. 12mm11363 12 Pt. Dp. Skt. 13mm11364 12 Pt. Dp. Skt. 14mm11365 12 Pt. Dp. Skt. 15mm11367 12 Pt. Dp. Skt. 17mm11369 12 Pt. Dp. Skt. 19mm11412 Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11900 Ratchet Quick Release

Metal BoxTotal Weight 9 lb

46


Set now available withyour choice of eitherteardrop ratchet or our new economicalRound Head Ratchet.

18 PIECE — 3/8" DRIVE SOCKET SET Item Number: 19123 with Quick Release RatchetItem Number: 19136 with Round Head Ratchet

Number Description Number Description11208 12 Pt. Std. Skt. 3/8"11209 12 Pt. Std. Skt. 7/16"11210 12 Pt. Std. Skt. 1/2"11211 12 Pt. Std. Skt. 9/16"11212 12 Pt. Std. Skt. 5/8"11213 12 Pt. Std. Skt. 11/16"11214 12 Pt. Std. Skt. 3/4"11258 12 Pt. Dp. Skt. 3/8"11259 12 Pt. Dp. Skt. 7/16"11260 12 Pt. Dp. Skt. 1/2"11261 12 Pt. Dp. Skt. 9/16"

11262 12 Pt. Dp. Skt. 5/8"11263 12 Pt. Dp. Skt. 11/16"11264 12 Pt. Dp. Skt. 3/4"11412 Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11900 Ratchet Quick Release




Number Description Number Description12110 6 Pt. Std. Skt. 10mm12111 6 Pt. Std. Skt. 11mm12112 6 Pt. Std. Skt. 12mm12113 6 Pt. Std. Skt. 13mm12114 6 Pt. Std. Skt. 14mm12115 6 Pt. Std. Skt. 15mm12116 6 Pt. Std. Skt. 16mm12117 6 Pt. Std. Skt. 17mm12118 6 Pt. Std. Skt. 18mm12119 6 Pt. Std. Skt. 19mm11160 6 Pt. Dp. Skt. 10mm11161 6 Pt. Dp. Skt. 11mm

11162 6 Pt. Dp. Skt. 12mm11163 6 Pt. Dp. Skt. 13mm11164 6 Pt. Dp. Skt. 14mm11165 6 Pt. Dp. Skt. 15mm11167 6 Pt. Dp. Skt. 17mm11169 6 Pt. Dp. Skt. 19mm11412 Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11900 Ratchet Quick Release



Number Description Number Description11008 6 Pt. Std. Skt. 3/8"11009 6 Pt. Std. Skt. 7/16"11010 6 Pt. Std. Skt. 1/2"11011 6 Pt. Std. Skt. 9/16"11012 6 Pt. Std. Skt. 5/8"11013 6 Pt. Std. Skt. 11/16"11014 6 Pt. Std. Skt. 3/4"11058 6 Pt. Dp. Skt. 3/8"11059 6 Pt. Dp. Skt. 7/16"11060 6 Pt. Dp. Skt. 1/2"

11061 6 Pt. Dp. Skt. 9/16"11062 6 Pt. Dp. Skt. 5/8"11063 6 Pt. Dp. Skt. 11/16"11064 6 Pt. Dp. Skt. 3/4"11412 Spark Plug Skt. 5/8" 11905 3" Extension11910 6" Extension11900 Ratchet Quick Release


47



Number Description Number Description12110 6 Pt. Std. Skt. 10mm12111 6 Pt. Std. Skt. 11mm12112 6 Pt. Std. Skt. 12mm12113 6 Pt. Std. Skt. 13mm12114 6 Pt. Std. Skt. 14mm12115 6 Pt. Std. Skt. 15mm12116 6 Pt. Std. Skt. 16mm12117 6 Pt. Std. Skt. 17mm

12118 6 Pt. Std. Skt. 18mm12119 6 Pt. Std. Skt. 19mm11412 Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11900 Ratchet Quick Release



Number Description Number Description11310 12 Pt. Std. Skt. 10mm11311 12 Pt. Std. Skt. 11mm11312 12 Pt. Std. Skt. 12mm11313 12 Pt. Std. Skt. 13mm11314 12 Pt. Std. Skt. 14mm11315 12 Pt. Std. Skt. 15mm11316 12 Pt. Std. Skt. 16mm11317 12 Pt. Std. Skt. 17mm11318 12 Pt. Std. Skt. 18mm

11319 12 Pt. Std. Skt. 19mm11412 Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11900 Ratchet Quick Release



Set now availablewith your choice ofeither teardrop ratchet or our neweconomical RoundHead Ratchet.


Number Description Number Description12107 6 Pt. Std. Skt. 7mm12108 6 Pt. Std. Skt. 8mm12109 6 Pt. Std. Skt. 9mm12110 6 Pt. Std. Skt. 10mm12111 6 Pt. Std. Skt. 11mm12112 6 Pt. Std. Skt. 12mm12113 6 Pt. Std. Skt. 13mm12114 6 Pt. Std. Skt. 14mm

12115 6 Pt. Std. Skt. 15mm12116 6 Pt. Std. Skt. 16mm12117 6 Pt. Std. Skt. 17mm12118 6 Pt. Std. Skt. 18mm12119 6 Pt. Std. Skt. 19mmSocket Rail,packaged in clamshellTotal Weight 1.05 lb

48



Number Description Number Description11208 12 Pt. Std. Skt. 3/8"11209 12 Pt. Std. Skt. 7/16"11210 12 Pt. Std. Skt.1/2"11211 12 Pt. Std. Skt. 9/16"11212 12 Pt. Std. Skt. 5/8"11213 12 Pt. Std. Skt. 11/16"11214 12 Pt. Std. Skt. 3/4"11215 12 Pt. Std. Skt. 13/16"

11412 Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11900 Ratchet Quick Release



12 PIECE — 3/8" DRIVE SOCKET SET Item Number: 19134

Number Description Number Description11008 6 Pt. Std. Skt. 3/8"11009 6 Pt. Std. Skt. 7/16"11010 6 Pt. Std. Skt. 1/2"11011 6 Pt. Std. Skt. 9/16"11012 6 Pt. Std. Skt. 5/8"11013 6 Pt. Std. Skt. 11/16"11014 6 Pt. Std. Skt. 3/4"

11015 6 Pt. Std. Skt. 13/16"11412 Spark Plug Skt. 5/8"11905 3" Extension11910 6" Extension11900 Ratchet Quick Release




Number Description Number Description11206 12 Pt. Std. Skt. 5/16"11208 12 Pt. Std. Skt. 3/8"11209 12 Pt. Std. Skt. 7/16"11210 12 Pt. Std. Skt. 1/2"11211 12 Pt. Std. Skt. 9/16"11212 12 Pt. Std. Skt. 5/8"11213 12 Pt. Std. Skt. 11/16"

11214 12 Pt. Std. Skt. 3/4"11215 12 Pt. Std. Skt. 13/16"11913 Round Head RatchetSocket Rail, packaged in a clamshellTotal Weight 1.32 lb




49











11 PIECE — 3/8" DRIVE DEEP METRIC SOCKET SETItem Number: 19120

Number Description Number Description11359 12 Pt. Dp. Skt. 9mm11360 12 Pt. Dp. Skt. 10mm11361 12 Pt. Dp. Skt. 11mm11362 12 Pt. Dp. Skt. 12mm11363 12 Pt. Dp. Skt. 13mm11364 12 Pt. Dp. Skt. 14mm11365 12 Pt. Dp. Skt. 15mm

11366 12 Pt. Dp. Skt. 16mm11367 12 Pt. Dp. Skt. 17mm11368 12 Pt. Dp. Skt. 18mm11369 12 Pt. Dp. Skt. 19mmSocket Rail,packaged in clamshellTotal Weight .98 lb

50


7 PIECE — 3/8" DRIVE FLEX SOCKET SETItem Number: 19121

Number Description11508 6 Pt. Flex Skt. 3/8"11509 6 Pt. Flex Skt. 7/16"11510 6 Pt. Flex Skt. 1/2"11511 6 Pt. Flex Skt. 9/16"11512 6 Pt. Flex Skt. 5/8"11513 6 Pt. Flex Skt. 11/16"11514 6 Pt. Flex Skt. 3/4"

Metal BoxTotal Weight .72 lb



11 PIECE — 3/8" DRIVE DEEP METRIC SOCKET SETItem Number: 19130


11166 6 Pt. Dp. Skt. 16mm11167 6 Pt. Dp. Skt. 17mm11168 6 Pt. Dp. Skt. 18mm11169 6 Pt. Dp. Skt. 19mmSocket Rail,packaged in clamshellTotal Weight .98 lb

11264 12 Pt. Dp. Skt. 3/4"11265 12 Pt. Dp. Skt. 13/16"11266 12 Pt. Dp. Skt. 7/8"Socket Rail,packaged in clamshellTotal Weight .70 lb




7 PIECE — 3/8" DRIVE METRIC FLEX SOCKET SETItem Number: 19122

Number Description11560 6 Pt. Flex Skt. 10mm11561 6 Pt. Flex Skt. 11mm11562 6 Pt. Flex Skt. 12mm11563 6 Pt. Flex Skt. 13mm11564 6 Pt. Flex Skt. 14mm11565 6 Pt. Flex Skt. 15mm11567 6 Pt. Flex Skt. 17mm

Metal BoxTotal Weight .72 lb

51


9 PIECE — 3/8" DRIVE HEX BIT SOCKET SETItem Number: 56370

Number Description58800 Bit Skt. 7/64"58802 Bit Skt. 1/8"58804 Bit Skt. 9/64"58806 Bit Skt. 5/32"58808 Bit Skt. 3/16"58810 Bit Skt. 7/32"58812 Bit Skt. 1/4"58814 Bit Skt. 5/16"58815 Bit Skt. 3/8"


8 PIECE — 3/8" DRIVE METRIC HEX BIT SOCKET SETItem Number: 56368

Number Description Number Description58672 Bit Skt. 2mm58674 Bit Skt. 2.5mm58676 Bit Skt. 3mm58678 Bit Skt. 4mm58680 Bit Skt. 5mm

58682 Bit Skt. 6mm58684 Bit Skt. 8mm58686 Bit Skt. 10mm


13 PIECE — 3/8" DRIVE FRACTIONAL/METRICHEX BIT SOCKET SETItem Number: 56367

Number Description Number Description58676 Bit Skt. 3mm58678 Bit Skt. 4mm58680 Bit Skt. 5mm58682 Bit Skt. 6mm58684 Bit Skt. 8mm58686 Bit Skt. 10mm58802 Bit Skt. 1/8"

58806 Bit Skt. 5/32"58808 Bit Skt. 3/16"58810 Bit Skt. 7/32"58812 Bit Skt. 1/4"58814 Bit Skt. 5/16"58815 Bit Skt. 3/8"Total Weight 2.0 lb

9 PIECE — 1/4" & 3/8" DRIVE TORX® BITSOCKET SETItem Number: 56376

Number Description Number Description58900 1/4" Dr. Bit Skt. T-1058903 1/4" Dr. Bit Skt. T-1558906 1/4" Dr. Bit Skt. T-2058909 1/4" Dr. Bit Skt. T-2558912 1/4" Dr. Bit Skt. T-2758915 1/4" Dr. Bit Skt. T-30Torx®is a registered trademark of CAMCAR, Division of TEXTRON, Inc

58918 3/8" Dr. Bit Skt. T-4058921 3/8" Dr. Bit Skt. T-4558924 3/8" Dr. Bit Skt. T-50


52


8 PIECE — 3/8" DRIVE DEEP IMPACT SOCKET SETItem Number: 19501

Number Description Number Description34056 6 Pt. Dp. Skt. 5/16"34058 6 Pt. Dp. Skt. 3/8"34059 6 Pt. Dp. Skt. 7/16"34060 6 Pt. Dp. Skt. 1/2"34061 6 Pt. Dp. Skt. 9/16"

8 PIECE — 3/8" DRIVE IMPACT SOCKET SETItem Number: 19500

Number Description Number Description34006 6 Pt. Std. Skt. 5/16"34008 6 Pt. Std. Skt. 3/8"34009 6 Pt. Std. Skt. 7/16"34010 6 Pt. Std. Skt. 1/2"34011 6 Pt. Std. Skt. 9/16"

12 PIECE — 3/8" DRIVE METRIC IMPACTSOCKET SETItem Number: 19502

Number Description Number Description34108 6 Pt. Std. Skt. 8mm34109 6 Pt. Std. Skt. 9mm34110 6 Pt. Std. Skt. 10mm34111 6 Pt. Std. Skt. 11mm34112 6 Pt. Std. Skt. 12mm34113 6 Pt. Std. Skt. 13mm34114 6 Pt. Std. Skt. 14mm

34012 6 Pt. Std. Skt. 5/8"34013 6 Pt. Std. Skt. 11/16"34014 6 Pt. Std. Skt. 3/4"Socket Rail,packaged in clamshellTotal Weight .65 lb

34115 6 Pt. Std. Skt. 15mm34116 6 Pt. Std. Skt. 16mm34117 6 Pt. Std. Skt. 17mm34118 6 Pt. Std. Skt. 18mm34119 6 Pt. Std. Skt. 19mmSocket Rail,packaged in clamshellTotal Weight 3.75 lb


11 PIECE — 3/8" DRIVE DEEP METRIC IMPACTSOCKET SETItem Number: 19511

Number Description34159 6 Pt. Dp. Skt. 9mm34160 6 Pt. Dp. Skt. 10mm34161 6 Pt. Dp. Skt. 11mm34162 6 Pt. Dp. Skt. 12mm34163 6 Pt. Dp. Skt. 13mm34164 6 Pt. Dp. Skt. 14m

Number Description 34165 6 Pt. Dp. Skt. 15mm34166 6 Pt. Dp. Skt. 16mm34167 6 Pt. Dp. Skt. 17mm34168 6 Pt. Dp. Skt. 18mm34169 6 Pt. Dp. Skt. 19mmSocket Rail,packaged in clamshellTotal Weight 2.1 lb

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

1/2" DRIVE RATCHETS


Item Weight NumberNumber Length (lbs) of Teeth12800 10.313 1.31 3612807 Ratchet Repair Kit for 12800


53

1/2" DRIVE RATCHETS




ROUND HEAD QUICK RELEASE LONG HANDLE



B L A C K

OXTM




TEARDROP NON-QUICK RELEASE — BLACK

Item Weight NumberNumber Length (lbs) of Teeth12801B 10.313 1.31 3612808 Ratchet Repair Kit for 12801B


TEARDROP QUICK RELEASE FLEX HEAD






54


EXTENSIONS

Item Size WeightNumber (Inch) (lbs)12803 2 .1912805 3 .2512810 6 .5612812 10 .9412814 20 1.25


FLEX HANDLE

Item WeightNumber Length (lbs)12820 15.000 1.5112821 18.000 1.69


SPEEDER HANDLE



FLEX HANDLE — BLACK

Item WeightNumber Length (lbs)12820B 15.000 1.51Fed. Std. GGG-W-641e ANSI Spec. B107.10M

B L A C K

OXTM

EXTENSIONS — BLACK

Item Size WeightNumber (Inch) (lbs)12805B 3 .2512810B 5 .5612812B 10 .94Fed. Std. GGG-W-641e ANSI Spec. B107.10M

B L A C K

OXTM

55


IMPACT ADAPTERS

Item WeightNumber Length (lbs)35201 1.500 .1335202 1.688 .35

ADAPTERS

Item Size WeightNumber (Inch) Length (lbs)12827 1/2 F x 3/8 M 1.440 .1212828 1/2 F x 3/4 M 1.755 .25


UNIVERSAL JOINT



IMPACT EXTENSIONS


UNIVERSAL IMPACT


B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM


Item Size Dimensions WeightNumber (Inch) A B C (lbs)12028 3/8 1.510 .874 .524 .1212029 7/16 1.510 .876 .684 .1212030 1/2 1.510 .876 .754 .1212031 9/16 1.510 .876 .818 .1212032 5/8 1.510 .876 .876 .1212033 11/16 1.510 .967 .967 .1212034 3/4 1.510 1.042 1.042 .1912035 13/16 1.510 1.122 1.122 .1912036 7/8 1.510 1.186 1.186 .1912037 15/16 1.510 1.262 1.262 .2512038 1 1.635 1.340 1.340 .3112039 1 1/16 1.635 1.414 1.414 .3812040 1 1/8 1.697 1.495 1.495 .3812042 1 1/4 1.770 1.652 1.652 .50


A

B

C

1/2" DRIVE SOCKETS

56

1/2" DRIVE SOCKETS


Item Size Dimensions WeightNumber (mm) A B C (lbs)12309 9 1.510 .870 .558 .1212310 10 1.510 .876 .614 .1212311 11 1.510 .876 .716 .1212312 12 1.510 .876 .735 .1212313 13 1.510 .876 .764 .1212314 14 1.510 .876 .828 .1212315 15 1.510 .864 .864 .1212316 16 1.510 .890 .890 .1212317 17 1.510 .941 .941 .1212318 18 1.510 1.002 1.002 .1212319 19 1.510 1.042 1.042 .1212320 20 1.510 1.085 1.085 .1912321 21 1.510 1.122 1.122 .1912322 22 1.510 1.186 1.186 .1912323 23 1.510 1.218 1.218 .2512324 24 1.510 1.262 1.262 .2512325 25 1.510 1.315 1.315 .25


Item Size Dimensions WeightNumber (Inch) A B C (lbs)12208 3/8 1.510 .874 .524 .1212209 7/16 1.510 .876 .684 .1212210 1/2 1.510 .876 .754 .1212211 9/16 1.510 .876 .818 .1212212 5/8 1.510 .876 .876 .1212213 11/16 1.510 .967 .967 .1912214 3/4 1.510 1.042 1.042 .1912215 13/16 1.510 1.122 1.122 .1912216 7/8 1.510 1.186 1.186 .2512217 15/16 1.510 1.262 1.262 .2512218 1 1.635 1.340 1.340 .3112219 1 1/16 1.635 1.414 1.414 .3812220 1 1/8 1.697 1.495 1.495 .3812222 1 1/4 1.770 1.650 1.650 .5012226 1 1/2 1.920 1.972 1.972 .56


Item Size Dimensions WeightNumber (mm) A B C (lbs)12326 26 1.635 1.380 1.380 .3112327 27 1.635 1.414 1.414 .3112328 28 1.697 1.488 1.488 .3812330 30 1.697 1.558 1.558 .3812332 32 1.770 1.652 1.652 .5012336 36 1.920 1.879 1.879 .69


A

B

C


Item Size Dimensions WeightNumber (Inch) A B C (lbs)12060 1/2 3.267 .876 .754 .2512061 9/16 3.267 .876 .818 .2512062 5/8 3.267 .876 .876 .2512063 11/16 3.267 .967 .967 .2512064 3/4 3.267 1.042 1.042 .3112065 13/16 3.267 1.130 1.130 .3812066 7/8 3.267 1.195 1.195 .3812067 15/16 3.267 1.274 1.274 .4412068 1 3.267 1.352 1.352 .4412069 1 1/16 3.267 1.426 1.426 .5612070 1 1/8 3.267 1.507 1.507 1.06


A

B

C

57

1/2" DRIVE SOCKETS


Item Size Dimensions WeightNumber (Inch) A B C (lbs)12260 1/2 3.267 .876 .754 .2512261 9/16 3.267 .876 .818 .2512262 5/8 3.267 .876 .876 .2512263 11/16 3.267 .967 .967 .2512264 3/4 3.267 1.042 1.042 .3112265 13/16 3.267 1.130 1.130 .3812266 7/8 3.267 1.195 1.195 .3812267 15/16 3.267 1.274 1.274 .4412268 1 3.267 1.274 1.274 .4412269 1 1/16 3.267 1.426 1.426 .6312270 1 1/8 3.267 1.507 1.507 .63


6 PT. — SPARK PLUG SOCKETS

Item Size WeightNumber (Inch) Length (lbs)12412 5/8 2.455 .2712415 13/16 2.513 .27


A

B

C

HEX BIT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B (lbs)58836 1/4 3.120 .940 .2558838 5/16 3.120 .940 .2558840 3/8 3.120 .940 .3158842 7/16 3.120 .940 .3858844 1/2 3.120 .940 .5058846 9/16 3.120 1.189 .7558848 5/8 3.120 1.189 .81

A

B

58

1/2" DRIVE SOCKETS

6 PT. — IMPACT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)35008 3/8 1.496 0.878 .891 0.197 .1935009 7/16 1.496 0.878 .891 0.236 .1935010 1/2 1.496 0.957 .891 0.276 .1935011 9/16 1.496 0.957 .891 0.315 .1935012 5/8 1.496 0.957 1.000 0.354 .1935013 11/16 1.496 1.051 1.084 0.354 .2535014 3/4 1.496 1.185 1.152 0.394 .2535015 13/16 1.614 1.260 1.250 0.433 .2535016 7/8 1.614 1.260 1.298 0.492 .3135017 15/16 1.750 1.311 1.356 0.512 .5135018 1 1.750 1.427 1.463 0.531 .5635019 1 1/16 1.750 1.490 1.525 0.630 .6235020 1 1/8 2.000 1.563 1.592 0.812 .6935021 1 3/16 2.000 1.625 1.651 0.875 .7535022 1 1/4 2.000 1.750 1.757 0.906 .81

6 PT. — METRIC IMPACT SOCKETS

Item Size Dimensions WeightNumber (mm) A B C D (lbs)35110 10 1.496 0.874 .891 0.276 .1935111 11 1.496 0.874 .891 0.315 .1935112 12 1.496 0.874 .891 0.354 .1935113 13 1.496 0.957 .891 0.354 .1935114 14 1.496 0.957 .881 0.394 .1935115 15 1.496 0.957 .963 0.433 .1935116 16 1.496 0.957 1.019 0.433 .2535117 17 1.496 1.051 1.045 0.433 .2535118 18 1.496 1.094 1.084 0.472 .2535119 19 1.496 1.185 1.152 0.472 .2535120 20 1.614 1.185 1.188 0.512 .2535121 21 1.614 1.260 1.272 0.512 .2535122 22 1.614 1.260 1.298 0.571 .2535124 24 1.750 1.311 1.356 0.591 .3135127 27 1.750 1.490 1.525 0.630 .50


Item Size Dimensions WeightNumber (Inch) A B C D (lbs)35058 3/8 3.228 0.878 .875 0.551 .3835059 7/16 3.228 0.878 .875 0.551 .3835060 1/2 3.228 0.957 .875 0.866 .3835061 9/16 3.228 0.957 .875 0.984 .3835062 5/8 3.228 0.957 1.000 1.063 .3835063 11/16 3.228 1.051 1.062 1.142 .4435064 3/4 3.228 1.185 1.188 1.260 .5135065 13/16 3.228 1.260 1.255 1.339 .5635066 7/8 3.228 1.260 1.298 1.339 .6935067 15/16 3.228 1.311 1.440 1.339 .8135068 1 3.228 1.427 1.463 1.339 1.1235069 1 1/16 3.228 1.490 1.525 1.339 1.2535070 1 1/8 3.500 1.563 1.592 0.812 1.3135072 1 1/4 3.500 1.750 1.754 0.875 1.38

6 PT. — METRIC DEEP IMPACT SOCKETS

Item Size Dimensions WeightNumber (mm) A B C D (lbs)35160 10 3.228 0.878 .875 0.551 .3835161 11 3.228 0.878 .875 0.551 .3835162 12 3.228 0.878 .875 0.551 .3835163 13 3.228 0.957 .875 0.866 .3835164 14 3.228 0.957 .875 0.984 .3835165 15 3.228 0.957 .937 1.063 .3835166 16 3.228 0.957 1.000 1.063 .3835167 17 3.228 1.051 1.062 1.142 .3835168 18 3.228 1.094 1.062 1.260 .4435169 19 3.228 1.185 1.188 1.260 .5035170 20 3.228 1.250 1.188 1.339 .5035171 21 3.228 1.260 1.270 1.339 .5635172 22 3.228 1.260 1.298 1.339 .6935174 24 3.228 1.311 1.440 1.339 .8135177 27 3.500 1.500 1.525 0.780 1.1235180 30 3.500 1.625 1.694 0.875 1.1935182 32 3.500 1.750 1.754 0.875 1.3135186 36 3.500 2.000 2.069 0.875 1.38

A

B

C

D

B L A C K

OXTM

A

B

C

D

B L A C K

OXTM

59





Number Description Number Description12309 12 Pt. Std. Skt. 9mm12310 12 Pt. Std. Skt. 10mm12311 12 Pt. Std. Skt. 11mm12312 12 Pt. Std. Skt. 12mm12313 12 Pt. Std. Skt. 13mm12314 12 Pt. Std. Skt. 14mm12315 12 Pt. Std. Skt. 15mm12316 12 Pt. Std. Skt. 16mm12317 12 Pt. Std. Skt. 17mm12318 12 Pt. Std. Skt. 18mm12319 12 Pt. Std. Skt. 19mm12320 12 Pt. Std. Skt. 20mm12321 12 Pt. Std. Skt. 21mm



12322 12 Pt. Std. Skt. 22mm12323 12 Pt. Std. Skt. 23mm12324 12 Pt. Std. Skt. 24mm12327 12 Pt. Std. Skt. 27mm12330 12 Pt. Std. Skt. 30mm12332 12 Pt. Std. Skt. 32mm12810 6" Extension12812 10" Extension12820 Flex Handle 15"12800 Ratchet Quick Release


12218 12 Pt. Std. Skt. 1"12219 12 Pt. Std. Skt. 1 1/16"12220 12 Pt. Std. Skt. 1 1/8"12222 12 Pt. Std. Skt. 1 1/4"12810 6" Extension12820 Flex Handle 15"12800 Ratchet Quick Release


12038 6 Pt. Std. Skt. 1"12039 6 Pt. Std. Skt. 1 1/16"12040 6 Pt. Std. Skt. 1 1/8"12042 6 Pt. Std. Skt. 1 1/4"12810 6" Extension12820 Flex Handle 15"12800 Ratchet Quick Release



Number Description Number Description12029 6 Pt. Std. Skt. 7/16"12030 6 Pt. Std. Skt. 1/2"12031 6 Pt. Std. Skt. 9/16"12212 12 Pt. Std. Skt. 5/8"12213 12 Pt. Std. Skt. 11/16"12214 12 Pt. Std. Skt. 3/4"12215 12 Pt. Std. Skt. 13/16"12216 12 Pt. Std. Skt. 7/8"12217 12 Pt. Std. Skt. 15/16"12218 12 Pt. Std. Skt. 1"12219 12 Pt. Std. Skt. 1 1/16"12220 12 Pt. Std. Skt. 1 1/8"12222 12 Pt. Std. Skt. 1 1/4"

12260 12 Pt. Dp. Skt. 1/2"12261 12 Pt. Dp. Skt. 9/16"12262 12 Pt. Dp. Skt. 5/8"12263 12 Pt. Dp. Skt. 11/16"12264 12 Pt. Dp. Skt. 3/4"12265 12 Pt. Dp. Skt. 13/16"12266 12 Pt. Dp. Skt. 7/8"12810 6" Extension12820 Flex Handle 15"12800 Ratchet Quick Release


60






12217 12 Pt. Std. Skt. 15/16"12218 12 Pt. Std. Skt. 1"12810 6" Extension12800 Ratchet Quick Release



12036 6 Pt. Std. Skt. 7/8"12037 6 Pt. Std. Skt. 15/16"12038 6 Pt. Std. Skt. 1"12039 6 Pt. Std. Skt. 1 1/16"12040 6 Pt. Std. Skt. 1 1/8"12042 6 Pt. Std. Skt. 1 1/4"

Socket RailTotal Weight 3.15 lb


Number Description Number Description12310 12 Pt. Std. Skt. 10mm12312 12 Pt. Std. Skt. 12mm12313 12 Pt. Std. Skt. 13mm12314 12 Pt. Std. Skt. 14mm12317 12 Pt. Std. Skt. 17mm12318 12 Pt. Std. Skt. 18mm12319 12 Pt. Std. Skt. 19mm12322 12 Pt. Std. Skt. 22mm12323 12 Pt. Std. Skt. 23mm12324 12 Pt. Std. Skt. 24mm

12325 12 Pt. Std. Skt. 25mm12327 12 Pt. Std. Skt. 27mm12328 12 Pt. Std. Skt. 28mm12810 6" Extension12800 Ratchet Quick Release



Set now availablewith your choice ofeither teardrop ratchet or our neweconomical RoundHead Ratchet.






61



Number Description Number Description12060 6 Pt. Dp. Skt. 1/2"12061 6 Pt. Dp. Skt. 9/16"12062 6 Pt. Dp. Skt. 5/8"12063 6 Pt. Dp. Skt. 11/16"12064 6 Pt. Dp. Skt. 3/4"12065 6 Pt. Dp. Skt. 13/16"12066 6 Pt. Dp. Skt. 7/8"


Number Description Number Description12260 12 Pt. Dp. Skt. 1/2"12261 12 Pt. Dp. Skt. 9/16"12262 12 Pt. Dp. Skt. 5/8"12263 12 Pt. Dp. Skt. 11/16"12264 12 Pt. Dp. Skt. 3/4"12265 12 Pt. Dp. Skt. 13/16"12266 12 Pt. Dp. Skt. 7/8"

12067 6 Pt. Dp. Skt. 15/16"12068 6 Pt. Dp. Skt. 1"12069 6 Pt. Dp. Skt. 1 1/16"12070 6 Pt. Dp. Skt. 1 1/8"


12267 12 Pt. Dp. Skt. 15/16"12268 12 Pt. Dp. Skt. 1"12269 12 Pt. Dp. Skt. 1 1/16"12270 12 Pt. Dp. Skt. 1 1/8"



Number Description Number Description12310 12 Pt. Std. Skt. 10mm12311 12 Pt. Std. Skt. 11mm12312 12 Pt. Std. Skt. 12mm12313 12 Pt. Std. Skt. 13mm12314 12 Pt. Std. Skt. 14mm12315 12 Pt. Std. Skt. 15mm12316 12 Pt. Std. Skt. 16mm12317 12 Pt. Std. Skt. 17mm12318 12 Pt. Std. Skt. 18mm12319 12 Pt. Std. Skt. 19mm12320 12 Pt. Std. Skt. 20mm

12321 12 Pt. Std. Skt. 21mm12322 12 Pt. Std. Skt. 22mm12323 12 Pt. Std. Skt. 23mm12324 12 Pt. Std. Skt. 24mm12325 12 Pt. Std. Skt. 25mm12326 12 Pt. Std. Skt. 26mm12327 12 Pt. Std. Skt. 27mm12328 12 Pt. Std. Skt. 28mm


7 PIECE — 1/2" DRIVE HEX BIT SOCKET SETItem Number: 56374

Number Description Number Description58836 1/2" Drive Bit Skt. 1/4"58838 1/2" Drive Bit Skt. 5/16"58840 1/2" Drive Bit Skt. 3/8"58842 1/2" Drive Bit Skt. 7/16"58844 1/2" Drive Bit Skt. 1/2"

58846 1/2" Drive Bit Skt. 9/16"58848 1/2" Drive Bit Skt. 5/8"


62


12 PIECE — 1/2" DRIVE METRIC IMPACT SOCKET SETItem Number: 19507

Number Description Number Description35110 6 Pt. Std. Skt. 10mm35111 6 Pt. Std. Skt. 11mm35112 6 Pt. Std. Skt. 12mm35113 6 Pt. Std. Skt. 13mm35114 6 Pt. Std. Skt. 14mm35115 6 Pt. Std. Skt. 15mm35116 6 Pt. Std. Skt. 16mm


Number Description Number Description35009 6 Pt. Std. Skt. 7/16"35010 6 Pt. Std. Skt. 1/2"35011 6 Pt. Std. Skt. 9/16"35012 6 Pt. Std. Skt. 5/8"35013 6 Pt. Std. Skt. 11/16"

35117 6 Pt. Std. Skt. 17mm35118 6 Pt. Std. Skt. 18mm35119 6 Pt. Std. Skt. 19mm35120 6 Pt. Std. Skt. 20mm35121 6 Pt. Std. Skt. 21mm


35014 6 Pt. Std. Skt. 3/4"35015 6 Pt. Std. Skt. 13/16"






B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM


Number Description Number Description35058 6 Pt. Dp. Skt. 3/8"35059 6 Pt. Dp. Skt. 7/16"35060 6 Pt. Dp. Skt. 1/2"35061 6 Pt. Dp. Skt. 9/16"35062 6 Pt. Dp. Skt. 5/8"35063 6 Pt. Dp. Skt. 11/16"35064 6 Pt. Dp. Skt. 3/4"35065 6 Pt. Dp. Skt. 13/16"

35066 6 Pt. Dp. Skt. 7/8"35067 6 Pt. Dp. Skt. 15/16"35068 6 Pt. Dp. Skt. 1"35069 6 Pt. Dp. Skt. 1 1/16"35070 6 Pt. Dp. Skt. 1 1/8"35072 6 Pt. Dp. Skt. 1 1/4"


B L A C K

OXTM

63


12 PIECE — 1/2" DRIVE DEEP METRIC IMPACT SOCKET SETItem Number: 19508



Number Description Number Description35059 6 Pt. Dp. Skt. 7/16"35060 6 Pt. Dp. Skt. 1/2"35061 6 Pt. Dp. Skt. 9/16"35062 6 Pt. Dp. Skt. 5/8"35063 6 Pt. Dp. Skt. 11/16"

35167 6 Pt. Dp. Skt. 17mm35168 6 Pt. Dp. Skt. 18mm35169 6 Pt. Dp. Skt. 19mm35170 6 Pt. Dp. Skt. 20mm35171 6 Pt. Dp. Skt. 21mm


35064 6 Pt. Dp. Skt. 3/4"35065 6 Pt. Dp. Skt. 13/16"35066 6 Pt. Dp. Skt. 7/8"


B L A C K

OXTM

B L A C K

OXTM

3/4" DRIVE RATCHETS

TEARDROP QUICK RELEASE — BLACK

Item Weight NumberNumber Length (lbs) of Teeth13900B 19.688 5.38 3613901 Ratchet Repair Kit for 13900BFed. Std. GGG-W-641e ANSI Spec. B107.10M




B L A C K

OXTM

64


ADAPTERS

Item Size WeightNumber (Inch) Length (lbs)13927 3/4F x 1/2M 2.00 .7513928 3/4F x 1M 2.00 .75


UNIVERSAL JOINT



SLIDING T HANDLE



FLEX HANDLE



EXTENSIONS

Item Size WeightNumber (Inch) (lbs)13910 5 .8813912 8 1.4413914 16 2.63


IMPACT ACCESSORIES

Item SocketNumber Description Applications741828 Impact Pin Std. and Dp. Skts.; Budd Wheel, Extensions741825 Impact O-Ring Std. and Dp. Skts.; Budd Wheel, Extensions

IMPACT EXTENSIONS

Item Size WeightNumber (Inch) (lbs)36207 7 1.6336208 10 2.3836209 13 3.19

IMPACT ADAPTERS

Item WeightNumber Length (lbs)36211 3/4F x 1/2M .7036212 3/4F x 1M .88

IMPACT UNIVERSAL JOINT


B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

65

3/4" DRIVE SOCKETS


Item Size Dimensions WeightNumber (Inch) A B C (lbs)13202 7/8 1.88 1.33 1.33 .3113203 15/16 1.88 1.40 1.33 .3113204 1 1.88 1.40 1.48 .3113205 1 1/16 2.00 1.40 1.55 .3113206 1 1/8 2.00 1.40 1.55 .3113207 1 3/16 2.13 1.50 1.70 .4413208 1 1/4 2.13 1.50 1.78 .5013209 1 5/16 2.13 1.50 1.85 .5613210 1 3/8 2.19 1.50 1.92 .6313211 1 7/16 2.25 1.50 2.02 .6913212 1 1/2 2.31 1.63 2.10 .6913213 1 9/16 2.31 1.63 2.10 .8113214 1 5/8 2.38 1.63 2.25 .8113215 1 11/16 2.44 1.75 2.32 1.0013216 1 3/4 2.50 1.75 2.39 1.0613217 1 13/16 2.56 1.75 2.47 1.0613218 1 7/8 2.62 1.75 2.60 1.3813220 2 2.69 1.75 2.76 1.6913222 2 1/8 2.81 1.75 2.90 1.8813223 2 3/16 2.88 1.75 3.02 2.0013224 2 1/4 2.94 1.75 3.09 2.1213240 2 3/8 3.00 1.75 3.24 2.38


A

B

C

6 PT. STANDARD IMPACT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)36107 1/2 1.750 1.750 .938 .250 .1236109 9/16 1.750 1.750 1.125 .281 .1236111 5/8 1.750 1.750 1.125 .313 .6236113 11/16 1.750 1.750 1.125 .313 .6136114 3/4 2.125 1.172 1.625 .313 .6936115 13/16 2.125 1.234 1.625 .563 .6936116 7/8 2.125 1.359 1.625 .609 .7536117 15/16 2.125 1.500 1.625 .609 .8136118 1 2.125 1.563 1.625 .594 .8736119 1 1/16 2.125 1.625 1.625 .547 .8736120 1 1/8 2.125 1.688 1.688 .813 .8736121 1 3/16 2.125 1.750 1.750 .813 1.0636122 1 1/4 2.125 1.875 1.875 .875 1.1236123 1 5/16 2.125 2.000 2.000 .906 1.4436124 1 3/8 2.125 2.000 2.000 .766 1.5636125 1 7/16 2.250 2.125 1.938 .781 1.5636126 1 1/2 2.250 2.125 1.938 .797 1.5636139 1 9/16 2.250 1.750 2.250 .875 1.1036140 1 5/8 2.250 1.750 2.250 .813 1.7036141 1 11/16 2.438 1.750 2.500 1.000 1.7036142 1 3/4 2.625 1.750 2.500 1.000 1.1036143 1 13/16 2.625 2.125 2.625 1.000 1.2036144 1 7/8 2.625 2.125 2.625 1.063 2.0036145 1 15/16 2.625 2.125 2.750 1.063 2.1036146 2 2.625 2.125 2.875 1.063 2.10

6 PT. STANDARD METRIC IMPACT SOCKETS

Item Size Dimensions WeightNumber (mm) A B C D (lbs)36317 17 1.750 1.750 1.125 .313 .6136319 19 1.750 1.750 1.250 .375 .6236322 22 1.875 1.750 1.500 .500 .7036324 24 1.875 1.750 1.563 .500 .7536327 27 2.063 1.750 1.750 .500 .7836330 30 2.063 1.750 1.750 .625 .9536332 32 2.063 1.750 1.938 .688 1.1036335 35 2.188 1.750 2.063 .750 1.3036336 36 2.188 1.750 2.063 .750 1.4036338 38 2.250 1.750 2.125 .813 1.5036341 41 2.250 1.750 2.250 .813 1.7036343 43 2.438 1.750 2.500 1.000 1.70

A

B

C

D

B L A C K

OXTM

66

3/4" DRIVE SOCKETS



Number Description Number Description13203 12 Pt. Std. Skt. 15/16"13204 12 Pt. Std. Skt. 1"13205 12 Pt. Std. Skt. 1 1/16"13206 12 Pt. Std. Skt. 1 1/8"13207 12 Pt. Std. Skt. 1 3/16"13208 12 Pt. Std. Skt. 1 1/4"13209 12 Pt. Std. Skt. 1 5/16"13210 12 Pt. Std. Skt. 1 3/8"13211 12 Pt. Std. Skt. 1 7/16"13212 12 Pt. Std. Skt. 1 1/2"13213 12 Pt. Std. Skt. 1 9/16"13214 12 Pt. Std. Skt. 1 5/8"13215 12 Pt. Std. Skt. 1 11/16"


Item Size Dimensions WeightNumber (Inch) A B C D (lbs)36160 1/2 3.531 1.750 .938 .250 1.2036161 9/16 3.531 1.750 1.000 .281 1.2036162 5/8 3.531 1.750 1.000 .313 1.1036163 11/16 3.531 1.750 1.125 .344 1.1036164 3/4 3.125 1.234 1.625 .563 1.0036165 13/16 3.125 1.359 1.625 .609 1.0036166 7/8 3.125 1.500 1.625 .609 1.0036167 15/16 3.125 1.563 1.625 .594 1.1936168 1 3.125 1.625 1.625 .547 1.1936169 1 1/16 3.500 1.625 1.750 .813 1.2536170 1 1/8 3.500 1.688 1.750 .813 1.5036171 1 3/16 3.500 1.813 1.875 .813 2.0636172 1 1/4 3.500 1.813 1.875 .906 2.3136173 1 5/16 3.500 2.000 1.875 .875 2.3136174 1 3/8 3.500 2.125 1.875 .875 2.3136175 1 7/16 3.500 2.125 1.875 .875 2.3136176 1 1/2 3.500 2.313 1.875 .859 2.3136177 1 9/16 3.531 1.750 2.250 .875 2.3036178 1 5/8 3.563 1.750 2.250 .813 1.7036179 1 11/16 3.531 1.750 2.500 1.000 2.1036180 1 3/4 3.531 1.750 2.500 1.000 2.1036181 1 13/16 3.531 1.750 2.625 1.000 2.2036182 1 7/8 3.531 2.125 2.625 1.063 3.0036184 2 3.531 2.125 2.875 1.063 3.10

BUDD WHEEL DEEP LENGTH DOUBLE OPENING SOCKET

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)36276 1 1/2 4.00 2.250 2.250 .750 2

13216 12 Pt. Std. Skt. 1 3/4"13217 12 Pt. Std. Skt. 1 13/16"13218 12 Pt. Std. Skt. 1 7/8"13220 12 Pt. Std. Skt. 2"13910 5" Extension13912 8" Extension13914 16" Extension13920 Flex Handle13922 Sliding T Handle13900 Ratchet Quick Release


A

B

C

D

B L A C K

OXTM

B L A C K

OXTM

A

B

C

D

67



Number Description Number Description36164 6 Pt. Dp. Skt. 3/4"36165 6 Pt. Dp. Skt. 13/16"36166 6 Pt. Dp. Skt. 7/8"36167 6 Pt. Dp. Skt. 15/16"36168 6 Pt. Dp. Skt. 1"36169 6 Pt. Dp. Skt. 1 1/16"36170 6 Pt. Dp. Skt. 1 1/8"36171 6 Pt. Dp. Skt. 1 3/16"


Number Description Number Description36114 6 Pt. Std. Skt. 3/4"36115 6 Pt. Std. Skt. 13/16"36116 6 Pt. Std. Skt. 7/8"36117 6 Pt. Std. Skt. 15/16"36118 6 Pt. Std. Skt. 1"36119 6 Pt. Std. Skt. 1 1/16"36120 6 Pt. Std. Skt. 1 1/8"36121 6 Pt. Std. Skt. 1 3/16"


Number Description Number Description13203 12 Pt. Std. Skt. 15/16"13204 12 Pt. Std. Skt. 1"13205 12 Pt. Std. Skt. 1 1/16"13206 12 Pt. Std. Skt. 1 1/8"13208 12 Pt. Std. Skt. 1 1/4"13210 12 Pt. Std. Skt. 1 3/8"13211 12 Pt. Std. Skt. 1 7/16"13212 12 Pt. Std. Skt. 1 1/2"

13214 12 Pt. Std. Skt. 1 5/8"13912 6" Extension13914 16" Extension13920 Flex Handle13900 Ratchet Quick Release


36122 6 Pt. Std. Skt. 1 1/4"36123 6 Pt. Std. Skt. 1 5/16"36124 6 Pt. Std. Skt. 1 3/8"36125 6 Pt. Std. Skt. 1 7/16"36126 6 Pt. Std. Skt. 1 1/2"

BoxedTotal Weight 3.98 lb

36172 6 Pt. Dp. Skt. 1 1/4"36173 6 Pt. Dp. Skt. 1 5/16"36174 6 Pt. Dp. Skt. 1 3/8"36175 6 Pt. Dp. Skt. 1 7/16"36176 6 Pt. Dp. Skt. 1 1/2"

BoxedTotal Weight 4.02 lb

B L A C K

OXTM

B L A C K

OXTM

68

1" DRIVE RATCHETS

1" DRIVE ACCESSORIES

EXTENSIONS

Item Size WeightNumber (Inch) (lbs)14812 8 2.3114817 17 4.31


FLEX HANDLE



IMPACT EXTENSIONS

Item Size WeightNumber (Inch) (lbs)37246 7 3.6037247 10 2.3437248 13 4.30

IMPACT UNIVERSALJOINT

Item Size WeightNumber (Inch) (lbs)37249 1.875 2.9

ADAPTER

Item Size WeightNumber (Inch) Length (lbs)14827 1F x 3/4M 3.000 1.00


B L A C K

OXTM

B L A C K

OXTM

IMPACT ADAPTER

Item Size WeightNumber (Inch) Length (lbs)37250 1F x 3/4M 2.750 1.8

B L A C K

OXTM


Item Weight NumberNumber Length (lbs) of Teeth14800 30.000 8 4514806 Ratchet Repair Kit for 14800


69

1" DRIVE SOCKETS

6 PT. — STANDARD IMPACT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)37114 3/4 2.250 1.438 2.000 1.25 1.0037115 13/16 2.188 2.125 1.500 .438 1.1037116 7/8 2.281 1.438 2.000 .703 1.0037117 15/16 2.281 1.563 2.000 .719 1.0037118 1 2.406 1.656 2.000 .766 1.0037119 1 1/16 2.406 1.750 2.000 .766 1.0037120 1 1/8 2.406 1.813 2.000 .422 1.0037121 1 3/16 2.531 2.063 2.063 .906 1.0337122 1 1/4 2.531 2.063 2.063 .906 1.0337123 1 5/16 2.531 2.063 2.063 .766 1.0337124 1 3/8 2.500 2.250 2.063 .766 1.0337125 1 7/16 2.500 2.250 2.063 .859 1.0337126 1 1/2 2.500 2.250 2.063 .859 1.0337127 1 9/16 2.500 2.500 2.063 1.000 1.0537128 1 5/8 2.500 2.500 2.063 1.000 1.0537129 1 11/16 2.625 2.500 2.063 1.000 1.0537130 1 3/4 2.625 2.750 2.375 1.000 2.0337131 1 13/16 2.625 2.750 2.375 1.063 2.0337132 1 7/8 2.750 2.750 2.375 1.063 2.0337133 1 15/16 2.750 2.984 2.375 1.063 2.0537134 2 2.875 2.984 2.375 1.172 2.0537135 2 1/16 2.875 2.984 2.375 1.172 3.0237136 2 1/8 3.000 3.250 2.375 1.203 3.0237137 2 3/16 3.063 2.125 3.250 1.250 3.8037138 2 1/4 3.000 3.250 2.375 1.218 3.0337139 2 5/16 3.063 3.500 2.375 1.313 3.0337140 2 3/8 3.063 3.500 2.375 1.500 3.0337141 2 7/16 3.563 2.125 3.625 1.375 4.5037142 2 1/2 3.188 3.500 2.375 1.359 3.0337143 2 9/16 3.563 2.125 3.625 1.375 5.4037144 2 5/8 3.625 2.125 3.625 1.500 5.4037145 2 11/16 3.688 2.125 3.750 1.500 5.8037146 2 3/4 3.750 2.125 3.750 1.500 5.4037147 2 13/16 3.750 3.375 3.938 1.563 6.4037148 2 7/8 3.750 3.375 3.938 1.563 5.9037149 2 15/16 3.750 3.375 3.938 1.625 6.5037150 3 3.750 3.375 4.125 1.750 7.1037151 3 1/8 3.750 3.375 4.125 1.750 7.50


Item Size Dimensions WeightNumber (Inch) A B C (lbs)14225 1 7/16 2.500 2.000 1.750 1.0014226 1 1/2 2.563 2.000 1.750 1.2514228 1 5/8 2.688 2.250 1.750 1.2514231 1 13/16 2.875 2.563 1.938 1.7514232 1 7/8 2.938 2.625 2.250 2.2514234 2 3.000 2.750 2.250 2.2514236 2 1/8 3.063 2.938 2.250 2.5014237 2 3/16 3.125 3.000 2.250 2.7514238 2 1/4 3.250 3.063 2.250 2.7514240 2 3/8 3.313 3.250 2.250 3.2514242 2 1/2 3.438 3.375 2.250 3.2514243 2 9/16 3.500 3.375 2.250 3.2514244 2 5/8 3.563 3.563 2.250 3.5014246 2 3/4 3.688 3.719 3.672 4.5014249 2 15/16 3.875 3.953 3.672 5.2514250 3 3.938 4.016 3.672 5.5014251 3 1/8 4.063 4.172 3.672 6.00

A

B

C

A

B

C

D

B L A C K

OXTM

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)37152 3 1/4 3.938 3.375 4.313 1.813 7.5037153 3 3/8 4.063 3.375 4.313 1.938 8.6037154 3 1/2 4.063 3.375 4.759 1.938 8.90

Fed. Std. GGG-W-660A ANSI Spec. B107.2

70

1" DRIVE SOCKETS

21 PIECE — 1" DRIVE SOCKET SETItem Number: 19400

Number Description Number Description14225 12 Pt. Std. Skt. 1 7/16"14226 12 Pt. Std. Skt. 1 1/2"14228 12 Pt. Std. Skt. 1 5/8"14231 12 Pt. Std. Skt. 1 13/16"14232 12 Pt. Std. Skt. 1 7/8"14234 12 Pt. Std. Skt. 2"14236 12 Pt. Std. Skt. 2 1/8"14237 12 Pt. Std. Skt. 2 3/16"14238 12 Pt. Std. Skt. 2 1/4"14240 12 Pt. Std. Skt. 2 3/8"14242 12 Pt. Std. Skt. 2 1/2"14243 12 Pt. Std. Skt. 2 9/16"

14244 12 Pt. Std. Skt. 2 5/8"14246 12 Pt. Std. Skt. 2 3/4"14249 12 Pt. Std. Skt. 2 15/16"14250 12 Pt. Std. Skt. 3"14251 12 Pt. Std. Skt. 3 1/8"14812 8" Extension14817 17" Extension14820 Flex Handle14800 Ratchet


6 PT. STANDARD DEEP IMPACT SOCKETS

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)37319 1 1/16 3.938 2.125 1.813 .500 1.837320 1 1/8 3.000 2.125 1.813 1.438 1.937322 1 1/4 3.938 2.125 2.000 .625 1.937323 1 5/16 3.438 2.125 2.125 1.813 2.137324 1 3/8 3.938 2.125 2.125 .750 2.537325 1 7/16 3.938 2.125 2.125 .750 2.537326 1 1/2 3.938 2.125 2.375 .813 2.537328 1 5/8 3.938 2.125 2.500 .813 2.837329 1 11/16 3.938 2.125 2.625 1.000 3.037330 1 3/4 3.938 2.125 2.750 1.000 3.037331 1 13/16 3.938 2.125 2.750 1.000 3.437332 1 7/8 3.938 2.125 2.750 1.063 3.537333 1 15/16 3.938 2.125 2.875 1.063 3.937334 2 3.938 2.125 2.875 1.063 4.137335 2 1/16 4.063 2.125 3.063 1.188 4.037336 2 1/8 4.063 2.125 3.250 1.188 4.837337 2 3/16 4.188 2.125 3.250 1.250 5.037338 2 1/4 4.188 2.125 3.250 1.250 5.437339 2 5/16 4.313 2.125 3.375 1.250 5.837340 2 3/8 4.688 2.125 3.375 1.375 6.1

A

B

C

B L A C K

OXTM

WRENCHES

72

WRENCHES■ IN THIS SECTION: Our complete line of heavy duty wrenches andwrench sets are shown with fractional followedby metric. Allen professional wrenches are avail-able in our new Black Ox™, black industrial fin-ish as well as nickel chrome and full polish finish.Product categories are listed in the followingorder:

• Combination wrenches• Midget combination wrenches• Open end wrenches

• Midget open end wrenches• Box end wrenches• Flare nut wrenches• Ratcheting box end wrenches• Adjustable wrenches• Structural wrenches• Adjustable spanner wrenches• Striking wrenches • Wrench sets

Nickel-chrome finish provides lifetime corrosionresistance.

Allendrive® box end formaximum torque withless chance of fastenerhead rounding.

Chamfered openingallows for faster andeasier fit over fastener.

15 degree offsethandle offers betterknuckle clearance.

AllenGrip® finish providesgreater comfort and lesschance for grip slippage.

Drop forged andthrough hardened alloyis stronger, tougher andlasts longer.

12 POINT COMBINATIONWRENCH

Ordinary box end wrenches contact the fastener at its corners.In high torque situations, this can lead to a rounding of thefastener and wrench slippage. With Allendrive, the wrenchholds the fastener across a broader contact area and allowsfor greater torque loads without wrench slippage.

Ordinary Box End Allendrive® Box End

Unique Allendrive® Design

All wrenches are proudly made in the U.S.A. and feature a lifetime warranty.

73

WRENCHES

12 PT. — COMBINATION WRENCHES

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)20204 1/4 3.99 .54 .18 .38 .23 .0620206 5/16 4.38 .72 .20 .47 .25 .0620208 3/8 5.32 .81 .20 .56 .29 .0620209 7/16 5.88 .87 .24 .66 .30 .1220210 1/2 6.54 .98 .27 .75 .32 .1920211 9/16 7.13 1.14 .29 .84 .35 .2520212 5/8 8.00 1.28 .32 .94 .39 .3120213 11/16 8.81 1.39 .35 1.03 .42 .3820214 3/4 9.67 1.50 .36 1.06 .45 .4420215 13/16 10.58 1.69 .37 1.18 .48 .5020216 7/8 11.56 1.69 .38 1.28 .48 .6320217 15/16 12.58 1.86 .39 1.37 .51 .8120218 1 13.56 1.94 .42 1.47 .55 1.0020219 1 1/16 14.69 2.16 .44 1.61 .55 1.1920220 1 1/8 15.63 2.20 .48 1.65 .58 1.3820222 1 1/4 16.94 2.49 .51 1.82 .58 1.5620223 1 5/16 18.31 2.52 .53 1.92 .62 1.6320224 1 3/8 20.35 2.88 .78 2.16 .94 1.6820225 1 7/16 20.35 2.88 .78 2.16 .94 1.7520226 1 1/2 20.35 2.88 .78 2.16 .94 3.0020228 1 5/8 24.08 3.44 .79 2.56 .98 3.8120229 1 11/16 24.08 3.44 .79 2.56 .98 6.8820230 1 3/4 26.09 3.70 .83 2.75 1.01 6.8820231 1 13/16 26.09 3.70 .83 2.75 1.01 6.8820232 1 7/8 27.10 3.88 .86 2.94 1.04 6.8820234 2 29.10 4.06 .86 3.06 1.04 6.88

A

B

CE

D

12 PT. — METRIC COMBINATION WRENCHES

Item Size Dimensions WeightNumber (mm) A B C D E (lbs)20307 7 4.24 .53 .19 .44 .23 .0620308 8 4.38 .72 .20 .47 .25 .0620309 9 4.91 .70 .20 .52 .26 .0620310 10 5.55 .81 .22 .62 .29 .1220311 11 5.88 .87 .24 .66 .30 .1220312 12 6.27 .94 .25 .72 .32 .1220313 13 6.54 .98 .27 .75 .32 .1920314 14 7.13 1.14 .29 .84 .35 .2520315 15 7.59 1.20 .30 .90 .37 .3120316 16 8.00 1.28 .32 .94 .39 .3120317 17 8.45 1.36 .33 .99 .40 .3820318 18 8.81 1.39 .35 1.03 .42 .4420319 19 9.67 1.50 .36 1.06 .45 .5020320 20 10.30 1.56 .36 1.13 .46 .5020321 21 10.95 1.63 .37 1.21 .47 .6320322 22 11.56 1.69 .38 1.28 .48 .6320323 23 12.20 1.78 .38 1.33 .50 .6320324 24 12.80 1.86 .39 1.38 .51 .6320325 25 13.56 1.94 .42 1.47 .55 .7520326 26 14.12 2.16 .44 1.61 .55 .7520327 27 14.69 2.16 .44 1.61 .55 .8820328 28 15.63 2.20 .48 1.65 .58 .8820329 29 14.37 2.43 .52 1.78 .58 .9420330 30 16.30 2.35 .50 1.74 .58 1.0020332 32 16.94 2.49 .51 1.82 .58 1.19

Fed. Std. GGG-W-636c ANSI Spec. B107.9

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)20235 2 1/16 25.75 3.94 .75 2.88 1.13 6.1220236 2 1/8 28.75 4.88 .88 3.50 1.31 10.0020237 2 3/16 28.75 4.88 .88 3.50 1.31 9.5020238 2 1/4 28.75 4.88 .88 3.50 1.31 9.3820239 2 3/8 28.75 4.88 .88 3.50 1.31 13.3820240 2 1/2 28.75 4.88 .88 3.50 1.31 13.56


A

B

CE

D

74

WRENCHES

12 PT. — METRIC COMBINATIONWRENCHES — BLACK

Item Size Dimensions WeightNumber (mm) A B C D E (lbs)20307B 7 4.24 .53 .19 .44 .23 .0620308B 8 4.38 .72 .20 .47 .25 .0620309B 9 4.91 .70 .20 .52 .26 .0620310B 10 5.55 .81 .22 .62 .29 .1220311B 11 5.88 .87 .24 .66 .30 .1220312B 12 6.27 .94 .25 .72 .32 .1220313B 13 6.54 .98 .27 .75 .32 .1920314B 14 7.13 1.14 .29 .84 .35 .2520315B 15 7.59 1.20 .30 .90 .37 .3120316B 16 8.00 1.28 .32 .94 .39 .3120317B 17 8.45 1.36 .33 .99 .40 .3820318B 18 8.81 1.39 .35 1.03 .42 .4420319B 19 9.67 1.50 .36 1.06 .45 .5020320B 20 10.30 1.56 .36 1.13 .46 .5020321B 21 10.95 1.63 .37 1.21 .47 .6320322B 22 11.56 1.69 .38 1.28 .48 .6320323B 23 12.20 1.78 .38 1.33 .50 .6320324B 24 12.80 1.86 .39 1.38 .51 .6320325B 25 13.56 1.94 .42 1.47 .55 .7520326B 26 14.12 2.16 .44 1.61 .55 .7520327B 27 14.69 2.16 .44 1.61 .55 .8820328B 28 15.63 2.20 .48 1.65 .58 .8820329B 29 14.37 2.43 .52 1.78 .71 .9420330B 30 16.30 2.35 .50 1.74 .58 1.0020332B 32 16.94 2.49 .51 1.82 .58 1.19Fed. Std. GGG-W-636c ANSI Spec. B107.9

12 PT. — COMBINATION WRENCHES — BLACK

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)20204B 1/4 3.99 .54 .18 .38 .23 .0620206B 5/16 4.38 .72 .20 .47 .25 .0620208B 3/8 5.32 .81 .20 .56 .29 .0620209B 7/16 5.88 .87 .24 .66 .30 .1220210B 1/2 6.54 .98 .27 .75 .32 .1920211B 9/16 7.13 1.14 .29 .84 .35 .2520212B 5/8 8.00 1.28 .32 .94 .39 .3120213B 11/16 8.81 1.39 .35 1.03 .42 .3820214B 3/4 9.67 1.50 .36 1.06 .45 .4420215B 13/16 10.58 1.69 .37 1.18 .48 .5020216B 7/8 11.56 1.69 .38 1.28 .48 .6320217B 15/16 12.58 1.86 .39 1.37 .51 .8120218B 1 13.56 1.94 .42 1.47 .55 1.0020219B 1 1/16 14.69 2.16 .44 1.61 .55 1.1920220B 1 1/8 15.63 2.20 .48 1.65 .58 1.3820222B 1 1/4 16.94 2.49 .51 1.82 .58 1.5620223B 1 5/16 18.31 2.52 .53 1.92 .62 1.6320224B 1 3/8 20.35 2.88 .78 2.16 .94 1.6820225B 1 7/16 20.35 2.88 .78 2.16 .94 1.7520226B 1 1/2 20.35 2.88 .78 2.16 .94 3.00Fed. Std. GGG-W-636c ANSI Spec. B107.6

A

B

CE

D

A

B

CE

D

B L A C K

OXTM

B L A C K

OXTM

75

WRENCHES

12 PT. — METRIC FULL POLISH COMBINATIONWRENCHES

Item Size Dimensions WeightNumber (mm) A B C D E (lbs)20413 7 4.24 .62 .19 .50 .22 .0620414 8 4.40 .67 .20 .49 .24 .0620415 9 4.91 .73 .20 .51 .26 .0620416 10 5.55 .84 .23 .62 .29 .1220417 11 5.87 .95 .24 .67 .31 .1220418 12 6.26 1.00 .26 .72 .33 .1220419 13 6.54 1.04 .27 .76 .34 .1920420 14 7.12 1.18 .29 .84 .37 .2520421 15 7.53 1.25 .30 .89 .40 .3120422 16 7.99 1.31 .31 .94 .43 .3120423 17 8.40 1.37 .32 .98 .44 .3820424 18 8.78 1.43 .34 1.01 .46 .4420425 19 9.66 1.56 .36 1.10 .49 .5020426 20 10.28 1.64 .37 1.14 .51 .5020427 21 10.93 1.72 .39 1.22 .55 .6220428 22 11.54 1.81 .40 1.28 .57 .6220429 23 12.16 1.89 .41 1.32 .58 .6220430 24 12.77 1.97 .42 1.39 .60 .6220431 25 13.52 2.05 .44 1.45 .64 .75

6 & 12 PT. — MIDGET COMBINATIONWRENCHES

Item Size Pt. Dimensions WeightNumber (Inch) Size A B C D E (lbs)66030 5/32 6 2.612 .380 .105 .312 .098 .0166032 3/16 6 2.827 .396 .110 .390 .102 .0166034 13/64 12 3.091 .454 .120 .412 .115 .0266036 7/32 12 3.152 .458 .130 .433 .125 .0266038 15/64 12 3.265 .485 .130 .454 .118 .0266040 1/4 12 3.390 .512 .133 .450 .125 .0266042 9/32 12 3.498 .595 .138 .539 .130 .0366044 5/16 12 3.643 .655 .141 .612 .132 .0366046 3/8 12 3.847 .706 .152 .675 .152 .0466048 7/16 12 4.055 .825 .160 .755 .154 .05

ANSI Spec. B107.6

A

B

C

D

E

Item Size Dimensions WeightNumber (mm) A B C D E (lbs)20432 26 14.13 2.22 .45 1.60 .65 .75020433 27 14.63 2.20 .46 1.55 .67 .87020434 29 15.56 2.28 .50 1.62 .69 .87020435 30 16.27 2.42 .52 1.72 .74 1.0020436 32 16.91 2.68 .54 1.90 .75 1.19


12 PT. — FULL POLISH COMBINATION WRENCHES

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)20470 1/4 4.03 .55 .17 .39 .20 .0620471 5/16 4.40 .67 .20 .49 .24 .0620472 3/8 5.32 .79 .21 .56 .25 .0620473 7/16 5.87 .95 .24 .67 .31 .1220474 1/2 6.54 1.04 .27 .76 .34 .1920475 9/16 7.12 1.18 .29 .84 .37 .2520476 5/8 7.99 1.31 .31 .94 .43 .3120477 11/16 8.78 1.43 .34 1.01 .46 .3820478 3/4 9.66 1.56 .36 1.10 .48 .4420479 13/16 10.55 1.66 .38 1.19 .54 .5020480 7/8 11.54 1.81 .40 1.28 .57 .6320481 15/16 12.54 1.92 .42 1.36 .60 .8120482 1 13.52 2.05 .44 1.45 .64 1.0020483 1 1/16 14.63 2.20 .46 1.55 .67 1.1920484 1 1/8 15.56 2.28 .50 1.62 .69 1.1920485 1 1/4 16.91 2.57 .54 1.82 .75 1.56


A

B

CE

D

A

B

CE

D

76

WRENCHES

OPEN END WRENCHES

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)21001 3/16 x 1/4 4.11 .52 .19 .38 .19 .0521004 1/4 x 5/16 4.49 .64 .19 .51 .19 .0521005 5/16 x 3/8 4.85 .75 .21 .64 .21 .0621008 3/8 x 7/16 5.22 .88 .24 .75 .24 .1221009 7/16 x 1/2 5.91 .98 .26 .87 .26 .1221010 1/2 x 9/16 6.14 1.13 .28 .97 .28 .1921011 9/16 x 5/8 6.97 1.20 .32 1.13 .32 .2521012 5/8 x 3/4 7.81 1.50 .35 1.20 .35 .3821015 11/16 x 3/4 7.88 1.50 .35 1.33 .35 .3121013 11/16 x 13/16 8.62 1.56 .36 1.33 .36 .3821016 3/4 x 13/16 8.68 1.56 .36 1.50 .36 .4421014 3/4 x 7/8 9.32 1.69 .36 1.50 .36 .5021017 15/16 x 1 10.65 1.94 .42 1.86 .42 .7521019 1 1/16 x 1 1/8 12.00 2.20 .42 1.97 .42 .9421022 1 1/4 x 1 5/16 14.62 2.52 .54 2.38 .54 1.00


METRIC OPEN END WRENCHES

Item Size Dimensions WeightNumber (mm) A B C D E (lbs)21106 6 x 8 4.49 .64 .19 .51 .19 .0621107 7 x 9 4.93 .69 .21 .53 .21 .0621110 10 x 11 5.22 .88 .24 .75 .24 .1221112 12 x 14 6.14 1.13 .28 .97 .28 .1921113 13 x 15 7.02 1.20 .32 .98 .32 .2521116 16 x 17 7.85 1.27 .34 1.20 .34 .3121117 17 x 19 8.68 1.50 .35 1.27 .35 .3821118 18 x 19 9.00 1.50 .35 1.33 .35 .4421120 20 x 22 9.52 1.69 .36 1.56 .36 .5021121 21 x 23 10.34 1.78 .38 1.63 .38 .56


6 & 12 PT. METRIC MIDGET COMBINATIONWRENCHES

Item Size Pt. Dimensions WeightNumber (mm) Size A B C D E (g)66430 4 6 66.3 9.7 2.7 7.9 2.5 566432 4.5 6 71.8 10.1 2.8 9.9 2.6 666434 5 12 81.6 11.5 3.1 10.5 2.9 866436 5.5 12 83.2 11.6 3.3 11.0 3.2 866438 6 12 86.1 13.0 3.4 11.4 3.2 866440 7 12 88.8 15.1 3.5 13.7 3.3 1166442 8 12 92.5 16.6 3.6 15.5 3.4 1466446 9 12 95.4 16.6 3.9 15.7 3.7 1666448 10 12 97.7 17.9 3.9 17.1 3.9 1666450 11 12 103.0 21.0 4.1 19.2 3.9 20

ANSI Spec. B107.9

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

77

WRENCHES

MIDGET OPEN END WRENCHES — 15° & 80°

Item Size Dimensions WeightNumber (Inch) A B C (lbs)66114 7/32 3.25 .48 .11 .0366115 15/64 3.38 .50 .11 .0366116 1/4 3.50 .50 .11 .0366118 9/32 3.63 .56 .15 .0366120 5/16 3.75 .58 .15 .0366122 11/32 3.88 .72 .15 .0366124 3/8 4.00 .73 .15 .0366128 7/16 4.13 .88 .16 .03


METRIC MIDGET OPEN END WRENCHES —15° & 80°

Item Size Dimensions WeightNumber (mm) A B C (lbs)66305 5.5 3.25 .48 .11 .0366306 6 3.50 .50 .11 .0366307 7 3.63 .56 .15 .0366308 8 3.75 .58 .15 .0366309 9 3.88 .72 .15 .0366310 10 4.00 .73 .15 .0366311 11 4.13 .88 .16 .03


12 PT. — 15° OFFSET BOX END WRENCHES

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)22204 1/4 x 5/16 7.06 .53 .25 .44 .25 .1222208 3/8 x 7/16 7.75 .65 .30 .56 .29 .1222209 7/16 x 1/2 8.47 .73 .32 .65 .30 .1922210 1/2 x 9/16 9.14 .84 .35 .73 .32 .2522211 9/16 x 5/8 9.85 .90 .39 .84 .35 .3122212 5/8 x 3/4 10.57 1.06 .45 .90 .39 .4422213 11/16 x 13/16 11.94 1.12 .48 1.00 .42 .5622214 3/4 x 7/8 12.66 1.26 .48 1.06 .45 .6322215 13/16 x 7/8 12.69 1.25 .48 1.12 .48 .6322217 15/16 x 1 15.45 1.44 .54 1.31 .51 1.06


OPEN END WRENCHES — BLACK

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)21004B 1/4 X 5/16 4.49 .64 .19 .51 .19 .0521008B 3/8 X 7/16 5.22 .88 .24 .75 .24 .1221010B 1/2 X 9/16 6.14 1.13 .28 .97 .28 .1921012B 5/8 X 3/4 7.81 1.50 .35 1.20 .35 .3821013B 11/16 X 13/16 8.62 1.56 .36 1.33 .36 .3821014B 3/4 X 7/8 9.32 1.69 .36 1.50 .36 .5021017B 15/16 X 1 10.65 1.94 .42 1.86 .42 .7521019B 1 1/16 X 1 1/8 12.00 2.20 .42 1.97 .42 .9421022B 1 1/4 X 1 5/16 14.62 2.52 .54 2.38 .54 1.00Fed. Std. GGG-W-636c ANSI Spec. B107.6

B L A C K

OXTM

A

B

C

D

E

A

BB

C C

A

BB

C C

A

B

C

D

E

78

WRENCHES

6 PT. — FLARE NUT WRENCHES

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)21404 3/8 x 7/16 5.97 .81 .33 .73 .30 .1221410 1/2 x 9/16 6.71 .95 .39 .89 .36 .1921412 5/8 x 11/16 7.56 1.18 .45 1.12 .42 .3121414 3/4 x 7/8 8.13 1.37 .51 1.25 .49 .38


6 PT. — METRIC FLARE NUT WRENCHES

Item Size Dimensions WeightNumber (mm) A B C D E (lbs)21509 9 x 11 5.96 .81 .33 .73 .30 .1221510 10 x 12 6.50 .85 .34 .77 .31 .1221511 11 x 12 6.50 .85 .34 .77 .31 .1221513 13 x 14 6.70 .95 .39 .89 .36 .1921515 15 x 17 7.57 1.18 .45 1.12 .42 .3121516 16 x 18 7.54 1.18 .45 1.12 .42 .3421519 19 x 21 8.12 1.37 .51 1.25 .49 .38


RACHETING BOX END WRENCHES

Item Size WeightNumber (Inch) Length (lbs)22604 1/4 x 5/16 4.500 .1222608 3/8 x 7/16 5.500 .1622610 1/2 x 9/16 6.750 .2522612 5/8 x 11/16 8.130 .6322614 3/4 x 7/8 9.250 .6322615 13/16 x 15/16 9.250 .63

Fed. Std. GGG-W-001405

12 PT. — 15° OFFSET BOX END WRENCHES — BLACK

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)22204B 1/4 X 5/16 7.06 .53 .25 .44 .25 .1222208B 3/8 X 7/16 7.75 .65 .30 .56 .29 .1222209B 7/16 X 1/2 8.47 .73 .32 .65 .30 .1922210B 1/2 X 9/16 9.14 .84 .35 .73 .32 .2522211B 9/16 X 5/8 9.85 .90 .39 .84 .35 .3122212B 5/8 X 3/4 10.57 1.06 .45 .90 .39 .4422213B 11/16 X 13/16 11.94 1.12 .48 1.00 .42 .5622214B 3/4 X 7/8 12.66 1.26 .48 1.06 .45 .6322215B 13/16 X 7/8 12.69 1.25 .48 1.12 .48 .6322217B 15/16 X 1 15.45 1.44 .54 1.31 .51 1.06Fed. Std. GGG-W-636c ANSI Spec. B107.6

B L A C K

OXTM

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

79

WRENCHES

ADJUSTABLE WRENCHES — BLACK

Item WeightNumber Length (lbs)26104 4.00 .1226106 6.00 .2526108 8.00 .4426110 10.00 .8126112 12.00 1.1926115 15.00 2.2526118 18.00 4.2526124 24.00 6.50

BLACK ADJUSTABLE CONSTRUCTION WRENCHItem Number: 21700


ADJUSTABLE WRENCHES

Item Weight Item WeightNumber Length (lbs) Number Length (lbs)24004 4.00 .1224006 6.00 .2524008 8.00 .4424010 10.00 .81

ANSI Spec. B107.8M

STRUCTURAL WRENCHES — OFFSET HANDLE

Item Size Dimensions WeightNumber (Inch) A B C D E (lbs)20911 9/16 9.500 1.563 0.406 1.063 2.063 .4320912 5/8 9.500 1.563 0.406 1.063 2.063 .4320913 11/16 9.500 1.563 0.406 1.063 2.500 .4320914 3/4 12.000 1.563 0.438 0.813 1.688 .7020915 13/16 14.500 2.000 0.531 0.938 1.875 1.3020916 7/8 14.500 2.000 0.531 0.938 1.875 1.3020917 15/16 14.500 2.000 0.531 0.938 1.875 1.3020918 1 14.500 2.000 0.531 0.938 1.875 1.3020919 1 1/16 17.000 2.250 0.625 1.063 2.375 1.9020920 1 1/8 17.000 2.250 0.625 1.063 2.375 1.9020922 1 1/4 19.000 2.813 0.688 1.250 2.750 2.6020923 1 5/16 19.000 2.813 0.688 1.250 2.750 2.6020925 1 7/16 20.000 3.125 0.750 1.250 3.063 3.5020926 1 1/2 20.000 3.125 0.750 1.250 3.063 3.5020928 1 5/8 23.000 3.594 0.813 1.500 3.375 4.8020929 1 11/16 22.000 4.000 0.750 1.063 3.625 5.9020931 1 13/16 22.000 4.000 0.750 1.063 3.625 5.9020932 1 7/8 25.000 4.438 1.000 1.625 3.625 5.9020934 2 25.000 4.438 1.000 1.625 3.625 5.90

Fed. Std. GGG-W-636e, Type IX, Class 1

B L A C K

OXTM

24012 12.00 1.1924015 15.00 2.2524017 18.00 4.2824024 24.00 6.69

B

A

D EC

B L A C K

OXTM

B L A C K

OXTM

80

WRENCHES

ADJUSTABLE PIN SPANNER

Item Diameter Hook Pin WeightNumber Length Range Capacity Thickness Diameter Length (lbs)21755 6.375 3/4 - 2 11/32 1/8 1/8 .2321756 6.375 3/4 - 2 11/32 3/16 5/32 .2321757 8.125 1 1/4 - 3 13/32 3/16 3/16 .4221758 8.125 1 1/4 - 3 13/32 1/4 7/32 .4221759 11.375 2 - 4 3/4 15/32 1/4 1/4 .9921760 12.125 4 1/2 - 6 1/4 15/32 3/8 1/4 1.1

ADJUSTABLE FACE SPANNER

Item Extreme Pin WeightNumber Length Capacity Diameter Length (lbs)21761 6.375 2 3/16 1/4 .4221762 8.125 3 1/4 1/4 .9921763 10.375 4 5/16 1/2 1.1

Fed. Std. GGG-W-665-B-1, Type III, Class 1

12 PT. — STRIKING FACE WRENCHES45° OFFSET

Item Opening Dimensions WeightNumber (Inch) A B C (lbs)21209 1 1/16 11.000 2.063 0.875 2.8221210 1 1/8 11.000 2.063 0.875 2.7921211 1 3/16 11.000 2.063 0.875 2.7521212 1 1/4 11.000 2.063 0.875 2.7121213 1 5/16 11.000 2.063 0.875 2.6821215 1 7/16 12.500 2.688 1.125 6.4621216 1 1/2 12.500 2.688 1.125 6.3821218 1 5/8 12.500 2.688 1.125 6.3021219 1 11/16 12.500 2.688 1.125 6.2321220 1 3/4 12.500 2.688 1.125 6.1521221 1 13/16 12.500 2.688 1.125 6.0721222 1 7/8 12.500 2.688 1.125 6.0021223 1 15/16 14.000 3.750 1.375 9.4521225 2 14.000 3.750 1.375 9.2721226 2 1/8 14.000 3.750 1.375 9.1021227 2 3/16 14.000 3.750 1.375 8.9521228 2 1/4 14.000 3.750 1.375 8.8021229 2 5/16 14.000 3.750 1.375 8.6321230 2 3/8 14.000 3.750 1.375 8.4621231 2 1/2 16.000 4.750 1.813 16.1321232 2 9/16 16.000 4.750 1.813 15.90

ADJUSTABLE HOOK SPANNER

Item Diameter Hook WeightNumber Length Range Capacity Thickness Depth (lbs)21750 6.375 3/4 - 2 11/32 1/8 .2321751 8.125 1 1/4 - 3 13/32 5/32 .4321752 11.375 2 - 4 3/4 15/32 3/16 1.0321753 12.125 4 1/2 - 6 1/4 15/32 1/4 1.1021754 13.750 6 1/8 - 8 3/4 15/32 5/16 1.40

Fed. Std. GGG-W-665-B-1, Type 1, Class 1B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTMB

A

C

Item Opening Dimensions WeightNumber (Inch) A B C (lbs)21233 2 5/8 16.000 4.750 1.813 15.6621234 2 3/4 16.000 4.750 1.813 15.4321235 2 7/8 16.000 4.750 1.813 15.2021236 2 15/16 16.000 4.750 1.813 14.9421237 3 16.000 4.750 1.813 14.7121238 3 1/8 16.000 4.750 1.813 14.48

Fed Std. GGG-W-636e, Type XII

A D

B

C

12 PT. — METRIC STRIKING FACE WRENCHES45° OFFSET

Item Opening Dimensions WeightNumber (mm) A B C (lbs)21209 27 11.000 2.063 0.875 2.8221211 30 11.000 2.063 0.875 2.7521212 32 11.000 2.063 0.875 2.7121213 33 11.000 2.063 0.875 2.6821214 36 12.500 2.688 1.125 6.4621216 38 12.500 2.688 1.125 6.3821218 41 12.500 2.688 1.125 6.3021219 43 12.500 2.688 1.125 6.2321220 44 12.500 2.688 1.125 6.1521221 46 12.500 2.688 1.125 6.0721224 50 14.000 3.750 1.375 9.4521225 51 14.000 3.750 1.375 9.2721226 54 14.000 3.750 1.375 9.1021227 55 14.000 3.750 1.375 8.9521228 57 14.000 3.750 1.375 8.8021229 59 14.000 3.750 1.375 8.6321230 60 14.000 3.750 1.375 8.4621231 64 16.000 4.750 1.813 16.1321232 65 16.000 4.750 1.813 15.9021233 67 16.000 4.750 1.813 15.6621234 70 16.000 4.750 1.813 15.4321235 73 16.000 4.750 1.813 15.2021236 75 16.000 4.750 1.813 14.9421237 76 16.000 4.750 1.813 14.7121238 80 16.000 4.750 1.813 14.48

81

WRENCHES

CROWFOOT WRENCH

Item Size Dimensions WeightNumber (Inch) A B C D (lbs)20550 3/8 .75 1.27 .22 .63 .06320552 7/16 .88 1.28 .22 .63 .06320553 1/2 .93 1.38 .26 .63 .06320554 9/16 1.13 1.49 .27 .63 .09420555 5/8 1.20 1.60 .35 .63 .09420556 11/16 1.33 1.71 .35 .63 .09420557 3/4 1.50 1.82 .35 .63 .12520558 13/16 1.56 1.83 .35 .63 .15620559 7/8 1.69 2.04 .37 .63 .15620564 1 2.03 2.26 .37 .63 .188

METRIC CROWFOOT WRENCH

Item Size Dimensions WeightNumber (mm) A B C D (lbs)20565 10 .81 1.20 .22 .63 .06320570 11 .88 1.28 .22 .63 .06320571 12 .94 1.34 .25 .63 .06320572 13 .93 1.38 .26 .63 .09420573 14 1.12 1.49 .26 .63 .09420574 15 1.16 1.55 .31 .63 .09420575 16 1.20 1.60 .35 .63 .09420576 17 1.33 1.77 .35 .63 .12520577 18 1.39 1.76 .35 .63 .12520578 19 1.50 1.82 .35 .63 .15620579 21 1.61 2.05 .35 .63 .15620580 22 1.69 2.04 .37 .63 .188

B

A

C

B L A C K

OXTM

82

WRENCH SETS

10 PIECE — CROWFOOT WRENCH SETItem Number: 29204

Number Description Number Description20550 Crowfoot Wr. 3/8"20552 Crowfoot Wr. 7/16"20553 Crowfoot Wr. 1/2"20554 Crowfoot Wr. 9/16"20555 Crowfoot Wr. 5/8"20556 Crowfoot Wr. 11/16"

10 PIECE — METRIC CROWFOOT WRENCH SETItem Number: 29205

Number Description Number Description20565 Crowfoot Wr. 10mm20570 Crowfoot Wr. 11mm20571 Crowfoot Wr. 12mm20572 Crowfoot Wr. 13mm20573 Crowfoot Wr. 14mm20574 Crowfoot Wr. 15mm

20557 Crowfoot Wr. 3/4"20558 Crowfoot Wr. 13/16"20559 Crowfoot Wr. 7/8"20564 Crowfoot Wr. 1"

Clip RailTotal Weight 1.28 lb

20575 Crowfoot Wr. 16mm20576 Crowfoot Wr. 17mm20577 Crowfoot Wr. 18mm20578 Crowfoot Wr. 19mm

Clip RailTotal Weight 1 lb

14 PIECE — COMBINATION WRENCH SETItem Number: 29010

Number Description Number Description20208 12 Pt. Combo Wr. 3/8"20209 12 Pt. Combo Wr. 7/16"20210 12 Pt. Combo Wr. 1/2"20211 12 Pt. Combo Wr. 9/16"20212 12 Pt. Combo Wr. 5/8"20213 12 Pt. Combo Wr. 11/16"20214 12 Pt. Combo Wr. 3/4"20215 12 Pt. Combo Wr. 13/16"

18 PIECE — FULL POLISH FRACTIONAL/METRICCOMBINATION WRENCH SETItem Number: 29020

Number Description Number Description20470 12 Pt. Combo Wr. 1/4"20471 12 Pt. Combo Wr. 5/16"20472 12 Pt. Combo Wr. 3/8"20473 12 Pt. Combo Wr. 7/16"20474 12 Pt. Combo Wr. 1/2"20475 12 Pt. Combo Wr. 9/16"20476 12 Pt. Combo Wr. 5/8"20477 12 Pt. Combo Wr. 11/16"20478 12 Pt. Combo Wr. 3/4"20416 12 Pt. Combo Wr. 10mm

20216 12 Pt. Combo Wr. 7/8"20217 12 Pt. Combo Wr. 15/16"20218 12 Pt. Combo Wr. 1"20219 12 Pt. Combo Wr. 1 1/16"20220 12 Pt. Combo Wr. 1 1/8"20222 12 Pt. Combo Wr. 1 1/4"

Tool RollTotal Weight 3.18 lb

20417 12 Pt. Combo Wr. 11mm20418 12 Pt. Combo Wr. 12mm20419 12 Pt. Combo Wr. 13mm20420 12 Pt. Combo Wr. 14mm20421 12 Pt. Combo Wr. 15mm20422 12 Pt. Combo Wr. 16mm20423 12 Pt. Combo Wr. 17mm20424 12 Pt. Combo Wr. 18mmHigh Density Polyethylene CaseTotal Weight 3.76 lb


Number Description Number Description20204 12 Pt. Combo Wr. 1/4”20206 12 Pt. Combo Wr. 5/16”20208 12 Pt. Combo Wr. 3/8”20209 12 Pt. Combo Wr. 7/16”20210 12 Pt. Combo Wr. 1/2”20211 12 Pt. Combo Wr. 9/16”20308 12 Pt. Combo Wr. 8mm

20309 12 Pt. Combo Wr. 9mm20310 12 Pt. Combo Wr. 10mm20312 12 Pt. Combo Wr. 12mm20313 12 Pt. Combo Wr. 13mm20314 12 Pt. Combo Wr. 14mm

Packaged in clamshellTotal Weight 1.60 lb

83

WRENCH SETS

15 PIECE—METRIC COMBINATION WRENCH SETItem Number: 29016

Number Description Number Description20307 12 Pt. Combo Wr. 7mm20308 12 Pt. Combo Wr. 8mm20309 12 Pt. Combo Wr. 9mm20310 12 Pt. Combo Wr. 10mm20311 12 Pt. Combo Wr. 11mm20312 12 Pt. Combo Wr. 12mm20313 12 Pt. Combo Wr. 13mm20314 12 Pt. Combo Wr. 14mm20315 12 Pt. Combo Wr. 15mm

15 PIECE — METRIC BLACK COMBINATIONWRENCH SETItem Number: 29016B

Number Description Number Description20307B 12 Pt. Combo Wr. 7mm20308B 12 Pt. Combo Wr. 8mm20309B 12 Pt. Combo Wr. 9mm20310B 12 Pt. Combo Wr. 10mm20311B 12 Pt. Combo Wr. 11mm20312B 12 Pt. Combo Wr. 12mm20313B 12 Pt. Combo Wr. 13mm20314B 12 Pt. Combo Wr. 14mm20315B 12 Pt. Combo Wr. 15mm

20316 12 Pt. Combo Wr. 16mm20317 12 Pt. Combo Wr. 17mm20318 12 Pt. Combo Wr. 18mm20319 12 Pt. Combo Wr. 19mm20321 12 Pt. Combo Wr. 21mm20322 12 Pt. Combo Wr. 22mm


20316B 12 Pt. Combo Wr. 16mm20317B 12 Pt. Combo Wr. 17mm20318B 12 Pt. Combo Wr. 18mm20319B 12 Pt. Combo Wr. 19mm20321B 12 Pt. Combo Wr. 21mm20322B 12 Pt. Combo Wr. 22mm


14 PIECE — BLACK COMBINATION WRENCH SETItem Number: 29010B

Number Description Number Description20208B 12 Pt. Combo Wr. 3/8"20209B 12 Pt. Combo Wr. 7/16"20210B 12 Pt. Combo Wr. 1/2"20211B 12 Pt. Combo Wr. 9/16"20212B 12 Pt. Combo Wr. 5/8"20213B 12 Pt. Combo Wr. 11/16"20214B 12 Pt. Combo Wr. 3/4"20215B 12 Pt. Combo Wr. 13/16"

20216B 12 Pt. Combo Wr. 7/8"20217B 12 Pt. Combo Wr. 15/16"20218B 12 Pt. Combo Wr. 1"20219B 12 Pt. Combo Wr. 1 1/16"20220B 12 Pt. Combo Wr. 1 1/8"20222B 12 Pt. Combo Wr. 1 1/4"


14 PIECE — FULL POLISH COMBINATIONWRENCH SETItem Number: 29307

Number Description Number Description20472 12 Pt. Combo Wr. 3/8"20473 12 Pt. Combo Wr. 7/16"20474 12 Pt. Combo Wr. 1/2"20475 12 Pt. Combo Wr. 9/16"20476 12 Pt. Combo Wr. 5/8"20477 12 Pt. Combo Wr. 11/16"20478 12 Pt. Combo Wr. 3/4"20479 12 Pt. Combo Wr. 13/16"

20480 12 Pt. Combo Wr. 7/8"20481 12 Pt. Combo Wr. 15/16"20482 12 Pt. Combo Wr. 1"20483 12 Pt. Combo Wr. 1 1/16"20484 12 Pt. Combo Wr. 1 1/8"20485 12 Pt. Combo Wr. 1 1/4"


B L A C K

OXTM

B L A C K

OXTM

84

WRENCH SETS

15 PIECE— METRIC FULL POLISH COMBINATIONWRENCH SETItem Number: 29303

Number Description Number Description20413 12 Pt. Combo Wr. 7mm20414 12 Pt. Combo Wr. 8mm20415 12 Pt. Combo Wr. 9mm20416 12 Pt. Combo Wr. 10mm20417 12 Pt. Combo Wr. 11mm20418 12 Pt. Combo Wr. 12mm20419 12 Pt. Combo Wr. 13mm20420 12 Pt. Combo Wr. 14mm20421 12 Pt. Combo Wr. 15mm


Number Description Number Description20208 12 Pt. Combo Wr. 3/8"20209 12 Pt. Combo Wr. 7/16"20210 12 Pt. Combo Wr. 1/2"20211 12 Pt. Combo Wr. 9/16"20212 12 Pt. Combo Wr. 5/8"20213 12 Pt. Combo Wr. 11/16"20214 12 Pt. Combo Wr. 3/4"

20215 12 Pt. Combo Wr. 13/16"20216 12 Pt. Combo Wr. 7/8"20217 12 Pt. Combo Wr. 15/16"20218 12 Pt. Combo Wr. 1"

Tool RollTotal Weight 2 lb

20422 12 Pt. Combo Wr. 16mm20423 12 Pt. Combo Wr. 17mm20424 12 Pt. Combo Wr. 18mm20425 12 Pt. Combo Wr. 19mm20427 12 Pt. Combo Wr. 21mm20428 12 Pt. Combo Wr. 22mm


11PIECE —METRIC COMBINATION WRENCH SETItem Number: 29017

Number Description Number Description20307 12 Pt. Combo Wr. 7mm20308 12 Pt. Combo Wr. 8mm20309 12 Pt. Combo Wr. 9mm20310 12 Pt. Combo Wr. 10mm20311 12 Pt. Combo Wr. 11mm20312 12 Pt. Combo Wr. 12mm20313 12 Pt. Combo Wr. 13mm


Number Description Number Description20472 12 Pt. Combo Wr. 3/8"20473 12 Pt. Combo Wr. 7/16"20474 12 Pt. Combo Wr. 1/2"20475 12 Pt. Combo Wr. 9/16"20476 12 Pt. Combo Wr. 5/8"20477 12 Pt. Combo Wr. 11/16"20478 12 Pt. Combo Wr. 3/4"

11 PIECE — METRIC FULL POLISHCOMBINATION WRENCH SETItem Number: 29304

Number Description Number Description20413 12 Pt. Combo Wr. 7mm20414 12 Pt. Combo Wr. 8mm20415 12 Pt. Combo Wr. 9mm20416 12 Pt. Combo Wr. 10mm20417 12 Pt. Combo Wr. 11mm20418 12 Pt. Combo Wr. 12mm20419 12 Pt. Combo Wr. 13mm

20314 12 Pt. Combo Wr. 14mm20315 12 Pt. Combo Wr. 15mm20317 12 Pt. Combo Wr. 17mm20319 12 Pt. Combo Wr. 19mm

Tool RollTotal Weight 2 lb

20479 12 Pt. Combo Wr. 13/16"20480 12 Pt. Combo Wr. 7/8"20481 12 Pt. Combo Wr. 15/16"20482 12 Pt. Combo Wr. 1"


20420 12 Pt. Combo Wr. 14mm20421 12 Pt. Combo Wr. 15mm20423 12 Pt. Combo Wr. 17mm20425 12 Pt. Combo Wr. 19mm



Number Description Number Description20208B 12 Pt. Combo Wr. 3/8"20209B 12 Pt. Combo Wr. 7/16"20210B 12 Pt. Combo Wr. 1/2"20211B 12 Pt. Combo Wr. 9/16"20212B 12 Pt. Combo Wr. 5/8"20213B 12 Pt. Combo Wr. 11/16"20214B 12 Pt. Combo Wr. 3/4"

85

WRENCH SETS

20215B 12 Pt. Combo Wr. 13/16"20216B 12 Pt. Combo Wr. 7/8"20217B 12 Pt. Combo Wr. 15/16"20218B 12 Pt. Combo Wr. 1"


11 PIECE — METRIC BLACK COMBINATION WRENCH SETItem Number: 29017B

Number Description Number Description20307B 12 Pt. Combo Wr. 7mm20308B 12 Pt. Combo Wr. 8mm20309B 12 Pt. Combo Wr. 9mm20310B 12 Pt. Combo Wr. 10mm20311B 12 Pt. Combo Wr. 11mm20312B 12 Pt. Combo Wr. 12mm20313B 12 Pt. Combo Wr. 13mm


Number Description Number Description20223 12 Pt. Combo Wr. 1 5/16"20224 12 Pt. Combo Wr. 1 3/8"20225 12 Pt. Combo Wr. 1 7/16"20226 12 Pt. Combo Wr. 1 1/2"20228 12 Pt. Combo Wr. 1 5/8"20229 12 Pt. Combo Wr. 1 11/16"


Number Description Number Description20204 12 Pt. Combo Wr. 1/4"20206 12 Pt. Combo Wr. 5/16"20208 12 Pt. Combo Wr. 3/8"20209 12 Pt. Combo Wr. 7/16"20210 12 Pt. Combo Wr. 1/2"20211 12 Pt. Combo Wr. 9/16"

20230 12 Pt. Combo Wr. 1 3/4"20231 12 Pt. Combo Wr. 1 13/16"20232 12 Pt. Combo Wr. 1 7/8"20234 12 Pt. Combo Wr. 2"

BoxTotal Weight 51.55 lb

20314B 12 Pt. Combo Wr. 14mm20315B 12 Pt. Combo Wr. 15mm20317B 12 Pt. Combo Wr. 17mm20319B 12 Pt. Combo Wr. 19mm


20212 12 Pt. Combo Wr. 5/8"20213 12 Pt. Combo Wr. 11/16"20214 12 Pt. Combo Wr. 3/4"


B L A C K

OXTM

B L A C K

OXTM

86

WRENCH SETS


Number Description Number Description20208 12 Pt. Combo Wr. 3/8"20209 12 Pt. Combo Wr. 7/16"20210 12 Pt. Combo Wr. 1/2"20211 12 Pt. Combo Wr. 9/16"20212 12 Pt. Combo Wr. 5/8"

20213 12 Pt. Combo Wr. 11/16"20214 12 Pt. Combo Wr. 3/4"


7 PIECE — METRIC COMBINATION WRENCH SETItem Number: 29018

Number Description Number Description20307 12 Pt. Combo Wr. 7mm20309 12 Pt. Combo Wr. 9mm20310 12 Pt. Combo Wr. 10mm20311 12 Pt. Combo Wr. 11mm20313 12 Pt. Combo Wr. 13mm


Number Description Number Description20472 12 Pt. Combo Wr. 3/8”20473 12 Pt. Combo Wr. 7/16”20474 12 Pt. Combo Wr. 1/2”20475 12 Pt. Combo Wr. 9/16”20476 12 Pt. Combo Wr. 5/8”

7 PIECE — METRIC FULL POLISHCOMBINATION WRENCH SETItem Number: 29305

Number Description Number Description20413 12 Pt. Combo Wr. 7mm20415 12 Pt. Combo Wr. 9mm20416 12 Pt. Combo Wr. 10mm20417 12 Pt. Combo Wr. 11mm20419 12 Pt. Combo Wr. 13mm

20314 12 Pt. Combo Wr. 14mm20315 12 Pt. Combo Wr. 15mm


20477 12 Pt. Combo Wr. 11/16”20478 12 Pt. Combo Wr. 3/4”


20420 12 Pt. Combo Wr. 14mm20421 12 Pt. Combo Wr. 15mm



Number Description Number Description20208B 12 Pt. Combo Wr. 3/8”20209B 12 Pt. Combo Wr. 7/16”20210B 12 Pt. Combo Wr. 1/2”20211B 12 Pt. Combo Wr. 9/16”20212B 12 Pt. Combo Wr. 5/8”

20213B 12 Pt. Combo Wr. 11/16”20214B 12 Pt. Combo Wr. 3/4”


B L A C K

OXTM

87

WRENCH SETS

7 PIECE — METRIC BLACK COMBINATIONWRENCH SET Item Number: 29018B

Number Description Number Description20307B 12 Pt. Combo Wr. 7mm20309B 12 Pt. Combo Wr. 9mm20310B 12 Pt. Combo Wr. 10mm20311B 12 Pt. Combo Wr. 11mm20313B 12 Pt. Combo Wr. 13mm

20314B 12 Pt. Combo Wr. 14mm20315B 12 Pt. Combo Wr. 15mm


10 PIECE — MIDGET COMBINATION WRENCH SETItem Number: 29025

Number Description Number Description66030 6 Pt. Midget Combo Wr. 5/32"66032 6 Pt. Midget Combo Wr. 3/16"66034 12 Pt. Midget Combo Wr. 13/64"66036 12 Pt. Midget Combo Wr. 7/32"66038 12 Pt. Midget Combo Wr. 15/64"66040 12 Pt. Midget Combo Wr. 1/4"66042 12 Pt. Midget Combo Wr. 9/32"


Number Description Number Description20206 12 Pt. Combo Wr. 5/16"20208 12 Pt. Combo Wr. 3/8"20209 12 Pt. Combo Wr. 7/16"20210 12 Pt. Combo Wr. 1/2"

20211 12 Pt. Combo Wr. 9/16"Pouch

Total Weight .60 lb


Number Description Number Description20308 12 Pt. Combo Wr. 8mm20310 12 Pt. Combo Wr. 10mm20311 12 Pt. Combo Wr. 11mm20312 12 Pt. Combo Wr. 12mm


Number Description Number Description66430 6 Pt. Midget Combo Wr. 4mm66432 6 Pt. Midget Combo Wr. 4.5mm66434 12 Pt. Midget Combo Wr. 5mm66436 12 Pt. Midget Combo Wr. 5.5mm66438 12 Pt. Midget Combo Wr. 6mm66440 12 Pt. Midget Combo Wr. 7mm66442 12 Pt. Midget Combo Wr. 8mm66446 12 Pt. Midget Combo Wr. 9mm

20313 12 Pt. Combo Wr. 13mmPouch

Total Weight .55 lb

66044 12 Pt. Midget Combo Wr. 5/16"66046 12Pt. Midget Combo Wr. 3/8"66048 12 Pt. Midget Combo Wr. 7/16"

PouchTotal Weight .98 lb

66448 12Pt. Midget Combo Wr. 10mm66450 12 Pt. Midget Combo Wr. 11mm

PouchTotal Weight 1.36 lb

B L A C K

OXTM

10 PIECE — OPEN END WRENCH SETItem Number: 29103

Number Description Number Description21004 Open End Wr. 1/4" x 5/16"21005 Open End Wr. 5/16" x 3/8"21009 Open End Wr. 7/16" x 1/2"21010 Open End Wr. 1/2" x 9/16"21011 Open End Wr. 9/16" x 5/8"21012 Open End Wr. 5/8" x 3/4"

10 PIECE — METRIC OPEN END WRENCH SETItem Number: 29104

Number Description Number Description21106 Open End Wr. 6 x 8mm21107 Open End Wr. 7 x 9mm21110 Open End Wr. 10 x 11mm21112 Open End Wr. 12 x 14mm21113 Open End Wr. 13 x 15mm21116 Open End Wr. 16 x 17mm

21013 Open End Wr. 11/16" x 13/16"21014 Open End Wr. 3/4" x 7/8"21017 Open End Wr. 15/16" x 1"21019 Open End Wr. 1 1/16" x 1 1/8"


21117 Open End Wr. 17 x 19mm21118 Open End Wr. 18 x 19mm21120 Open End Wr. 20 x 22mm21121 Open End Wr. 21 x 23mm


6 PIECE — OPEN END WRENCH SETItem Number: 29100

Number Description21004 Open End Wr. 1/4" x 5/16"21008 Open End Wr. 3/8" x 7/16"21010 Open End Wr. 1/2" x 9/16"21011 Open End Wr. 9/16" x 5/8"21013 Open End Wr. 11/16" x 13/16"21014 Open End Wr. 3/4" x 7/8"


6 PIECE — METRIC OPEN END WRENCH SETItem Number: 29101

Number Description21106 Open End Wr. 6mm x 8mm21107 Open End Wr. 7mm x 9mm21110 Open End Wr. 10mm x 11mm21112 Open End Wr. 12mm x 14mm21113 Open End Wr. 13mm x 15mm21117 Open End Wr. 17mm x 19mm


5 PIECE — BLACK OPEN END WRENCH SETItem Number: 29102B

Number Description Number Description21004B Open End Wr. 1/4" x 5/16"21008B Open End Wr. 3/8" x 7/16"21010B Open End Wr. 1/2" x 9/16"21012B Open End Wr. 5/8" x 3/4"

21017B Open End Wr. 15/16" x 1"Tool Roll


B L A C K

OXTM

88

WRENCH SETS

89

WRENCH SETS

8 PIECE — MIDGET OPEN END WRENCH SETItem Number: 29121

Number Description Number Description66114 Midget Open End Wr. 7/32"66115 Midget Open End Wr. 15/64"66116 Midget Open End Wr. 1/4"66118 Midget Open End Wr. 9/32"66120 Midget Open End Wr. 5/16"

7 PIECE — METRIC MIDGET OPEN END 15° &80° WRENCH SETItem Number: 29122

Number Description Number Description66305 Midget Open End Wr. 5.5mm66306 Midget Open End Wr. 6mm66307 Midget Open End Wr. 7mm66308 Midget Open End Wr. 8mm66309 Midget Open End Wr. 9mm

10 PIECE — 12 PT. BOX END WRENCH SETItem Number: 29302

Number Description Number Description22204 Box End Wr. 1/4" x 5/16"22208 Box End Wr. 3/8" x 7/16"22209 Box End Wr. 7/16" x 1/2"22210 Box End Wr. 1/2" x 9/16"22211 Box End Wr. 9/16" x 5/8"22212 Box End Wr. 5/8" x 3/4"

10 PIECE — 12 PT. BLACK BOX END WRENCH SETItem Number: 29302B

Number Description Number Description22204B Box End Wr. 1/4" x 5/16"22208B Box End Wr. 3/8" x 7/16"22209B Box End Wr. 7/16" x 1/2"22210B Box End Wr. 1/2" x 9/16"22211B Box End Wr. 9/16" x 5/8"22212B Box End Wr. 5/8" x 3/4"

22213 Box End Wr. 11/16" x 13/16"22214 Box End Wr. 3/4" x 7/8"22215 Box End Wr. 13/16" x 7/8"22217 Box End Wr. 15/16" x 1"


22213B Box End Wr. 11/16" x 13/16"22214B Box End Wr. 3/4" x 7/8"22215B Box End Wr. 13/16" x 7/8"22217B Box End Wr. 15/16" x 1"


66122 Midget Open End Wr. 11/32"66124 Midget Open End Wr. 3/8"66128 Midget Open End Wr. 7/16"


66310 Midget Open End Wr. 10mm66311 Midget Open End Wr. 11mm

PouchTotal Weight 1 lb

5 PIECE — 12 PT. BOX END WRENCH SETItem Number: 29300

Number Description22208 Box End Wr. 3/8" x 7/16"22210 Box End Wr. 1/2" x 9/16"22212 Box End Wr. 5/8" x 3/4"22213 Box End Wr. 11/16" x 13/16"22214 Box End Wr. 3/4" x 7/8"


B L A C K

OXTM

90

WRENCH SETS

3 PIECE — FLARE NUT WRENCH SETItem Number: 29202

Number Description21404 Flare Nut Wr. 3/8" x 7/16"21410 Flare Nut Wr. 1/2" x 9/16"21412 Flare Nut Wr. 5/8" x 11/16"


3 PIECE — METRIC FLARE NUT WRENCH SETItem Number: 29203

Number Description21511 Flare Nut Wr. 11mm x 12mm21513 Flare Nut Wr. 13mm x 14mm21515 Flare Nut Wr. 15mm x 17mm


4 PIECE — RATCHETING BOX END WRENCH SETItem Number: 29301

Number Description22604 Ratcheting Box End Wr. 1/4" x 5/16"22608 Ratcheting Box End Wr. 3/8" x 7/16"22610 Ratcheting Box End Wr. 1/2" x 9/16"22612 Ratcheting Box End Wr. 5/8" x 11/16"


3 PIECE — ADJUSTABLE WRENCH SETItem Number: 29311

Number Description24006 Adjustable Wr. 6"24008 Adjustable Wr. 8"24010 Adjustable Wr. 10"


2 PIECE — ADJUSTABLE WRENCH SETItem Number: 29310

Number Description24008 Adjustable Wr. 8"24012 Adjustable Wr. 12"


HEX KEYS & SETS

92

■ IN THIS SECTION: Allen offers the broadest line of fractional and metric hex keys and sets in the industry.Hex keys are shown in standard and ball endconfigurations along with our Torx® keys in thefollowing order:

• Duracast® fold-ups• Standard fold-ups• Short arm hex keys

• Long arm hex keys• Ball end L-keys• Cushion-Grip T-handles• Plas-T-Key® T-handles• Forged T-handles• Handi hex™ drivers• Hex key sets• Hex key assortments

All Allen hex keys are manufactured with heat-treated alloy steel,black finish to precision tolerances, and meet the requirements ofAMSE/ANSI B18.3 and Fed. Std. GGG-K-275 AMED 1.

HEX KEYS & SETS

Hex, Ball End and Torx® make up the most complete line of keyconfigurations available.

STANDARDFOLD-UP

Rotates to 270 degreesto a firm stop for bettertorquing and access.

Heat treated,tempered alloysteel provideshigh strength andresistance torotational distortion. Specially con-

toured handle forbetter feel andcontrol.

Rugged Duracast ®

case providesunmatched durability.

All hex keys are precision formedto exact dimen-sional tolerancesfor precise fit.

DURACAST®

FOLD-UP

T-HANDLE

Cushion-Gripprovides largecushion handlefor moretorque andcomfort.

T-handlehex keys are available inCushion-Grip,Plas-T-Key®,Forged and WireLoop handles.

All hex keys and hex key sets are proudly made in the U.S.A. and feature a lifetime warranty.

Nickel-Chrome-Moly alloy steelprovides out-standing torquestrength.

93

FOLD-UPS

DURACAST® BALL END FOLD-UP

Item No. Of Key Sizes Handle LengthNumber Keys (Inch) (Inch)56382 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 4 1/4

DURACAST® METRIC FOLD-UP

Item No. Of Key Sizes Handle LengthNumber Keys (mm) (Inch)56349 7 1.5, 2, 2.5, 3, 4, 5, 6 3 1/2

DURACAST® FOLD-UPS

Item No. Of Key Sizes Handle LengthNumber Keys (Inch) (Inch)56346 9 .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 3 1/256347 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 4 1/4

DURACAST® TORX® FOLD-UP

Item No. Of Key Sizes Handle LengthNumber Keys (Torx) (Inch)56348 7 T-10, T-15, T-20, T-25, T-27, T-30, T-40 4 1/4

Torx® is a registered trademark of CAMCAR, Division of TEXTRON, Inc.

DURACAST® 3 PIECE FOLD-UP SET — POUCHItem Number: 56357

Item No. Of Key Sizes Handle LengthNumber Keys (Inch)

(Inch)56346 9 .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 3 1/2

(mm)56349 7 1.5, 2, 2.5, 3, 4, 5, 6 3 1/2

(Torx)56348 7 T-10, T-15, T-20, T-25, T-27, T-30, T-40 4 1/4

DURACAST® HEX KEY/SCREWDRIVER FOLD-UP

Item No. Of Key Sizes Handle LengthNumber Keys (mm) (Inch)56384 6 2, 4, 5, 6 4 1/4

Phillips screwdriver bladeSlotted screwdriver blade

94

FOLD-UPS

STANDARD FOLD-UPS

Item No. Of Key Sizes Handle LengthNumber Type Keys (Inch) (Inch)56066 uncarded 9 .050, 1/16, 5/64, 3/32, 7/64, 3 3/8

1/8, 9/64, 5/32, 3/1656321 carded 9 .050, 1/16, 5/64, 3/32, 7/64, 3 3/8

1/8, 9/64, 5/32, 3/1656114 uncarded 8 .050, 1/16, 5/64, 3/32, 7/64, 3

1/8, 9/64, 5/3256314 carded 8 .050, 1/16, 5/64, 3/32, 7/64, 3

1/8, 9/64, 5/3256067 uncarded 9 5/64, 3/32, 7/64, 1/8, 9/64, 3 3/4

5/32, 3/16, 7/32, 1/456316 carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 3 3/4

5/32, 3/16, 7/32, 1/4

METRIC STANDARD FOLD-UPS

Item No. Of Key Sizes Handle LengthNumber Type Keys (Inch) (Inch)56070 uncarded 7 1.5, 2, 2.5, 3, 4, 5, 6 3 3/4 (95MM)56360 carded 7 1.5, 2, 2.5, 3, 4, 5, 6 3 3/4 (95MM)

METRIC LONG FOLD-UPS

Item No. Of Key Sizes Handle LengthNumber Type Keys (Inch) (Inch)56072 uncarded 5 4, 4, 6, 8, 10, 6 3/8 (162MM)56362 carded 5 4, 4, 6, 8, 10, 6 3/8 (162MM)

METRIC STANDARD HI-VIS FOLD-UPS (HI-VIS BLUE)

Item No. Of Key Sizes Handle LengthNumber Type Keys (Inch) (Inch)56076 uncarded 7 1.5, 2, 2.5, 3, 4, 5, 6 3 3/4 (95MM)56395 carded 7 1.5, 2, 2.5, 3, 4, 5, 6 3 3/4 (95MM)

STANDARD HI-VIS FOLD-UPS (HI-VIS ORANGE)

Item No. Of Key Sizes Handle LengthNumber Type Keys (Inch) (Inch)56073 uncarded 9 .050, 1/16, 5/64, 3/32, 7/64, 3 3/8

1/8, 9/64, 5/32, 3/1656391 carded 9 .050, 1/16, 5/64, 3/32, 7/64, 3 3/8

1/8, 9/64, 5/32, 3/1656115 uncarded 8 .050, 1/16, 5/64, 3/32, 7/64, 3

1/8, 9/64, 5/3256393 carded 8 .050, 1/16, 5/64, 3/32, 7/64, 3

1/8, 9/64, 5/32

LONG FOLD-UPS

Item No. Of Key Sizes Handle LengthNumber Type Keys (Inch) (Inch)56320 carded 5 3/16, 7/32, 1/4, 5/16, 3/8 6 3/856318 carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 6 3/8

5/32, 3/16, 7/32, 1/4

95

FOLD-UPS

LONG HI-VIS FOLD-UPS (HI-VIS ORANGE)

Item No. Of Key Sizes Handle LengthNumber Type Keys (Inch) (Inch)56074 uncarded 9 5/64, 3/32, 7/64, 1/8, 9/64, 6 3/8

5/32, 3/16, 7/32, 1/456394 carded 9 5/64, 3/32, 7/64, 1/8, 9/64, 6 3/8

5/32, 3/16, 7/32, 1/4

METRIC LONG HI-VIS FOLD-UPS (HI-VIS BLUE)

Item No. Of Key Sizes Handle LengthNumber Type Keys (mm) (Inch/mm)56077 uncarded 5 4, 5, 6, 8, 10 6 3/8 (162mm)56396 carded 5 4, 5, 6, 8, 10 6 3/8 (162mm)

TORX® FOLD-UP

Item No. Of Key Sizes Handle LengthNumber Type Keys (Torx) (Inch)56323 carded 7 T-10, T-15, T-20, T-25, 3 3/4

T-27, T-30, T-40,Torx® is a registered trademark of CAMCAR, Division of TEXTRON, Inc.

TORX® HI-VIS FOLD-UPS (HI-VIS GREEN)

Item No. Of Key Sizes Handle LengthNumber Type Keys (Torx) (Inch)56897 uncarded 7 T-10, T-15, T-20, T-25, 3 3/4

T-27, T-30, T-40, 56392 carded 7 T-10, T-15, T-20, T-25, 3 3/4

T-27, T-30, T-40,Torx® is a registered trademark of CAMCAR, Division of TEXTRON, Inc.

96

SHORT ARM HEX KEYS

INDIVIDUAL SHORT ARM

Item Key Sizes Item Key Sizes Item Key SizesNumber (Inch) Number (Inch) Number (Inch)57002 .02857004 .03557006 .05057008 1/1657010 5/6457012 3/3257013 7/6457014 1/8

57032 1/257034 9/1657036 5/857038 3/457040 7/857042 157044 1-1/457046 1-1/2

57018 9/6457020 5/3257022 3/1657024 7/3257026 1/457028 5/1657030 3/857031 7/16

METRIC INDIVIDUAL SHORT ARM

Item Key Sizes Item Key Sizes Item Key SizesNumber (mm) Number (mm) Number (mm)57129 0.757131 0.957135 1.357116 1.557118 257120 2.5

57133 1257134 1457138 1757142 1957143 22

57122 357124 457126 557128 657130 857132 10

TORX® INDIVIDUAL SHORT ARM

Item Key Sizes Item Key Sizes Item Key SizesNumber (Torx) Number (Torx) Number (Torx)57981 T-657982 T-757983 T-857984 T-957985 T-10

57991 T-4057992 T-4557993 T-5057994 T-55

57986 T-1557987 T-2057988 T-2557989 T-2757990 T-30

SHORT ARM HEX KEY SETS

METRIC SHORT ARM SET — POUCH

Item No. Of Key SizesNumber Keys (mm)56015 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

SHORT ARM SETS — POUCH

Item No. Of Key SizesNumber Keys (Inch)56100 6 .028, .035, .050, 1/16, 5/64, 3/3256004 7 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/456122 9 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/456030 11 .050, 1/16, 5/64, 3/32, 1/8, 5/32,

3/16, 7/32, 1/4, 5/16, 3/856032 15 .028, .035, .050, 1/16, 5/64, 3/32, 7/64,

1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/856011 20 .028, .035, .050, 1/16, 5/64, 3/32, 7/64,

1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16,3/8, 7/16, 1/2, 9/16, 5/8, 3/4

TORX® SHORT ARM SET — POUCH

Item Number No. Of Keys Key Sizes (Torx)56901 13 T-7, T-8, T-9, T-10, T-15, T-20, T-25,

T-27, T-30, T-40, T-45, T-50, T-55Torx® is a registered trademark of CAMCAR, Division of TEXTRON, Inc.


97

SHORT ARM HEX KEY SETS

METRIC SHORT ARM SET — PLASTIC HOLDER


SHORT ARM SETS — PLASTIC HOLDER

Item No. Of Key SizesNumber Keys Type (Inch)56080 13 uncarded .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,

5/32, 3/16, 7/32, 1/4, 5/16, 3/856108 12 uncarded .050, 1/16, 5/64, 3/32, 7/64, 1/8,

9/64, 5/32, 3/16, 7/32, 1/4, 5/1656310 12 carded .050, 1/16, 5/64, 3/32, 7/64, 1/8,

9/64, 5/32, 3/16, 7/32, 1/4, 5/16

METRIC SHORT ARM SETS — METAL BOX

Item No. Of Key SizesNumber Keys (mm)56038 12 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 1056036 15 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 17

SHORT ARM SETS — METAL BOX

Item No. Of Key SizesNumber Keys (Inch)56028 15 .028, .035, .050, 1/16, 5/64, 3/32, 7/64,

1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/856026 18 .028, .035, .050, 1/16, 5/64, 3/32,

7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8

98

LONG ARM SETS — POUCH

Item No. Of Key SizesNumber Keys (Inch)56150 11 .050, 1/16, 5/64, 3/32, 1/8, 5/32,

3/16, 7/32, 1/4, 5/16, 3/856013 13 .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,

5/32, 3/16, 7/32, 1/4, 5/16, 3/856014 15 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32,

1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4

METRIC LONG ARM SETS — POUCH

Item No. Of Key SizesNumber Keys (mm)56018 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 1056083 15 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 5,

6, 8, 10, 12, 14, 17, 19

TORX® LONG ARM SET — POUCH

Item No. Of Key SizesNumber Keys (Torx)56900 6 T-10, T-15, T-20, T-25, T-27, T-30


TORX® INDIVIDUAL LONG ARM

Item Key Sizes Item Key SizesNumber (Torx) Number (Torx)58926 T-1058927 T-1558928 T-20


58929 T-2558930 T-2758931 T-30

LONG ARM HEX KEY

LONG ARM HEX KEY SETS

INDIVIDUAL LONG ARM

Item Key Sizes Item Key Sizes Item Key SizesNumber (Inch) Number (Inch) Number (Inch)58007 .03558003 .05058001 1/1658002 5/6458004 3/3258005 7/6458006 1/858010 9/6458012 5/32

METRIC INDIVIDUAL LONG ARM

Item Key Sizes Item Key Sizes Item Key SizesNumber (mm) Number (mm) Number (mm)58048 0.958049 1.358050 1.558052 258054 2.5

58030 3/458032 7/858034 158036 1-1/458038 1-1/258040 1-3/458042 2

58014 3/1658016 7/3258018 1/458020 5/1658022 3/858023 7/1658024 1/258026 9/1658028 5/8

58066 1058068 1258090 1458092 1758094 19

58056 358058 458060 558062 658064 8

99

LONG ARM HEX KEY SETS

FRACTIONAL/METRIC LONG ARM COMBO SET

Item No. Of Key Sizes Key SizesNumber Keys (Inch) (mm)56009 22 .050, 1/16, 5/64, 3/32, 1.5, 2, 2.5, 3, 4

7/64, 1/8, 9/64, 5/32, 3/16, 5, 6, 8, 107/32, 1/4, 5/16, 3/8

LONG ARM SETS — PLASTIC HOLDER

Item No. Of Key SizesNumber Keys (Inch)56148 7 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/1656152 12 .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,

5/32, 3/16, 7/32, 1/4, 5/1656081 13 .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,

5/32, 3/16, 7/32, 1/4, 5/16, 3/8

METRIC LONG ARM SETS — PLASTIC HOLDER


LONG ARM SET — METAL BOX

Item No. Of Key SizesNumber Keys (Inch)56128 13 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32,

3/16, 7/32, 1/4, 5/16, 3/8, 1/2

METRIC LONG ARM SET — METAL BOX

Item No. Of Key SizesNumber Keys (mm)56085 10 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12

INDIVIDUAL 12" KEYS

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)58200 5/6458202 3/3258204 1/858206 5/32

INDIVIDUAL 6" KEYS

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)58070 5/6458072 3/3258073 7/6458074 1/858075 9/6458076 5/32

58078 3/1658080 7/3258082 1/458020 5/1658086 3/8

58208 3/1658210 7/3258212 1/4

6" AND 12" LONG ARM HEX KEYS

6" AND 12" LONG ARM HEX KEY SETS

12" KEY SET

Item No. Of Key SizesNumber Keys (Inch)56110 7 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4

100

6" KEY SET

Item No. Of Key SizesNumber Keys (Inch)56034 9 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8

101

BALL PLUS™ HEX KEYS

BALL PLUS™ INDIVIDUAL HEX KEYS

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)59300 .05059302 1/1659304 5/6459306 3/3259308 7/6459310 1/859312 9/6459314 5/3259316 3/16

59318 7/3259320 1/459322 5/1659324 3/859326 7/1659328 1/259330 9/1659332 5/859334 3/4

BALL PLUS™ METRIC INDIVIDUAL HEX KEYS

Item Key Sizes Item Key SizesNumber (mm) Number (mm)59100 1.559102 259104 2.559106 359107 3.559108 459109 4.559110 559111 5.559112 6

59113 759114 859115 959116 1059117 1159118 1259120 1459122 1759124 19

102

BALL PLUS™ SETS

BALL PLUS™ SETS

Item No. Of Key SizesNumber Keys Type (Inch)56190 13 caddy - carded .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16,

7/32, 1/4, 5/16, 3/856193 13 caddy - uncarded .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16,

7/32, 1/4, 5/16, 3/856195 8 pouch .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/3256196 12 caddy - uncarded .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16,

7/32, 1/4, 5/1656197 10 pouch 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16,

7/32, 1/456198 7 caddy - uncarded 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16

BALL PLUS™ METRIC SETS

Item No. Of Key SizesNumber Keys Type (mm)56191 9 caddy - carded 1.5, 2, 2.5, 3, 4, 5, 6, 8,1056194 9 caddy - uncarded 1.5, 2, 2.5, 3, 4, 5, 6, 8, 1056199 6 pouch 1.5, 2, 2.5, 3, 4, 5

BALL PLUS™ FRACTIONAL/METRIC COMBO SET

Item No. Of Key Sizes Key SizesNumber Keys Type (Inch) (mm)56192 22 caddy - carded .050, 1/16, 5/64, 3/32, 2, 2.5, 3, 4,

7/64, 1/8, 9/64, 5/32, 3/16, 5, 6, 8, 107/32, 1/4, 5/16, 3/8

BALL PLUS™ INDIVIDUAL CUSHION GRIP T-HANDLES

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)57602* 3/3257604* 7/6457606 1/857608 9/6457610 5/32

57612 3/1657614 7/3257616 1/457618 5/1657620 3/8

*Hex End Only

BALL PLUS™ INDIVIDUAL CUSHION GRIP T-HANDLES METRIC

Item Key Sizes Item Key SizesNumber (mm) Number (mm)57632* 2.557634 357636 457638 5

57640 657642 857644 10

*Hex End Only

103

BALL PLUS™ CUSHION GRIP T-HANDLES

BALL PLUS™ CUSHION GRIP T-HANDLE SETS

Item No. Of Key Sizes Key SizesNumber Keys Type (Inch) (mm)56131 6 pouch 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 4, 5, 6, 8, 1056130 10 pouch 3/32*, 7/64*, 1/8, 9/64, 5/32,

3/16, 7/32, 1/4, 5/16, 3/856134 11 pouch 5/32, 3/16, 7/32, 1/4, 5/16, 3/8*Hex End Only

BALL PLUS™ CUSHION GRIP T-HANDLE SETS METRIC

Item No. Of Key SizesNumber Keys Type (mm)56133 5 pouch 4, 5, 6, 8, 1056132 7 pouch 2.5*, 3, 4, 5, 6, 8, 10*Hex End Only

BALL PLUS™ SCREWDRIVER HANDLES

BALL PLUS™ METRIC SCREWDRIVER HANDLES

Item Key Sizes Item Key SizesNumber (mm) Number (mm)57670 1.2757671 1.557672 257673 2.557674 357675 3.557676 457677 4.5

57678 557679 5.557680 657681 757682 857683 957684 10

BALL PLUS™ SCREWDRIVER HANDLES

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)57650 .05057651 1/1657652 5/6457653 3/3257654 7/6457655 1/857656 9/6457657 5/32

57658 3/1657659 7/3257660 1/457661 5/1657662 3/857663 7/1657664 1/2

104

BALL PLUS™ SCREWDRIVER HANDLES SETS

BALL PLUS™ METRIC SCREWDRIVER HANDLE SETS

Item No. Of Key SizesNumber Keys Type (mm)56185 6 pouch 1.5, 2, 2.5, 3, 4, 556186 7 pouch 1.27, 1.5, 2, 2.5, 3, 4, 556187 9 pouch 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

BALL PLUS™ SCREWDRIVER HANDLE SETS

Item No. Of Key SizesNumber Keys Type (inch)56180 8 pouch .050, 1/16, 5/64, 3/32,

7/64, 1/8, 9/64, 5/3256181 8 roll 7/64, 1/8, 9/64, 5/32,

3/16, 7/32, 1/4, 5/1656182 13 pouch .050, 1/16, 5/64, 3/32,

7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8

56183 7 pouch 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16

BALL PLUS™ LONG LENGTH SCREWDRIVER HANDLES

Item Key Sizes Item Key Sizes Item Key SizesNumber (Inch) Number (Inch) Number (Inch)57750 5/6457751 3/3257752 7/6457753 1/8

57758 1/457759 5/1657760 3/8

57754 9/6457755 5/3257756 3/1657757 7/32

BALL PLUS™ METRIC LONG LENGTH SCREWDRIVER HANDLES

Item Key Sizes Item Key Sizes Item Key SizesNumber (mm) Number (mm) Number (mm)57770 2.057771 2.557772 3.0

57776 857777 10

57773 457774 557775 6

BALL PLUS™ LONG LENGTH SCREWDRIVER HANDLE SET

Item No. Of Key SizesNumber Keys Type (Inch)56184 11 pouch 5/64, 3/32, 7/64, 1/8, 9/64, 5/32,

3/16, 7/32, 1/4, 5/16, 3/8

BALL PLUS™ METRIC LONG LENGTH SCREWDRIVER HANDLE SET

Item No. Of Key SizesNumber Keys Type (mm)56188 8 pouch 2, 2.5, 3, 4, 5, 6, 8, 10

105

CUSHION-GRIP SETS — POUCH

Item No. Of Key Sizes Key LengthNumber Keys (Inch) (Inch)56161 8 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 656164 8 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 9

METRIC CUSHION-GRIP SET — POUCH

Item No. Of Key Sizes Key LengthNumber Keys (mm) (Inch)56093 5 2.5, 3, 4, 5, 6 6

CUSHION-GRIP SETS — METAL STAND

Item No. Of Key Sizes Key LengthNumber Keys (Inch) (Inch)56064 10 3/32, 7/64, 1/8, 9/64, 5/32, 6

3/16, 7/32, 1/4, 5/16, 3/856163 10 3/32, 7/64, 1/8, 9/64, 5/32, 9

3/16, 7/32, 1/4, 5/16, 3/8

CUSHION-GRIP T-HANDLES

CUSHION-GRIP T-HANDLE SETS

INDIVIDUAL CUSHION-GRIPS

Item Key Sizes Key Length Item Key Sizes Key LengthNumber (Inch) (Inch) Number (Inch) (Inch)57300 3/32 657302 7/64 657304 1/8 657306 9/64 657308 5/32 657310 3/16 657312 7/32 657314 1/4 657316 5/16 657318 3/8 6

METRIC INDIVIDUAL CUSHION-GRIPS

Item Key Sizes Key Length Item Key Sizes Key LengthNumber (mm) (mm) Number (mm) (mm)57842 2.5 15057844 3 15057846 4 150

58250 3/32 958252 7/64 958254 1/8 958256 9/64 958258 5/32 958260 3/16 958262 7/32 958264 1/4 958266 5/16 958268 3/8 9

57848 5 15057850 6 150

106

LOOP T-HANDLES

6" LOOP HANDLE SETS — POUCH

Item No. Of Key SizesNumber Keys (Inch)56257 8 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/456255 10 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8

METRIC 6" LOOP HANDLE SETS — POUCH

Item No. Of Key Sizes Key LengthNumber Keys (mm) (mm)56261 5 2.5, 3, 4, 5, 6 15256259 8 2, 2.5, 3, 4, 5, 6, 8, 10 152

INDIVIDUAL 9" LOOP HANDLE

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)58270 3/3258271 7/6458272 1/858273 9/6458274 5/32

METRIC INDIVIDUAL 9" LOOP HANDLE

Item Key Sizes Item Key SizesNumber (mm) Number (mm)58280 258281 2.558282 358283 4

58275 3/1658276 7/3258277 1/458278 5/1658279 3/8

58284 558285 658286 858287 10

LOOP T-HANDLE SETS

INDIVIDUAL 6" LOOP HANDLE

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)57320 3/3257321 7/6457322 1/857323 9/6457324 5/32

METRIC INDIVIDUAL 6" LOOP HANDLE

Item Key Sizes Item Key SizesNumber (mm) Number (mm)57860 257861 2.557862 357863 4

57325 3/1657326 7/3257327 1/457328 5/1657329 3/8

57864 557865 657866 857867 10

107

LOOP T-HANDLE SETS

PLAS-T-KEY® T-HANDLES

INDIVIDUAL PLAS-T-KEY®

Item Key Sizes Key Length Item Key Sizes Key LengthNumber (Inch) (Inch) Number (Inch) (Inch)57500 3/32 1 7/857502 7/64 2 1/857504 1/8 2 5/1657506 9/64 2 1/257508 5/32 2 11/1657510 3/16 3 3/3258412 7/32 4 1/258414 1/4 4 1/2

METRIC INDIVIDUAL PLAS-T-KEY®

Item Key Sizes Item Key SizesNumber (mm) Number (mm)57830 257832 2.557834 3

58400 3/32 4 1/258402 7/64 4 1/258404 1/8 4 1/258406 9/64 4 1/258408 5/32 4 1/258410 3/16 4 1/258416 5/16 4 1/258418 3/8 4 1/2

57836 457838 557840 6

PLAS-T-KEY® T-HANDLE SETS

PLAS-T-KEY SET® — METAL STAND

Item No. Of Key Sizes Key LengthNumber Keys (Inch) (Inch)56112 10 3/32, 7/64, 1/8, 9/64, 5/32, 6

3/16, 7/32, 1/4, 5/16, 3/8

9" LOOP HANDLE SETS — POUCH

Item No. Of Key SizesNumber Keys (Inch)56258 8 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/456256 10 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8

METRIC 9" LOOP HANDLE SETS — POUCH

Item No. Of Key Sizes Key LengthNumber Keys (mm) (mm)56262 5 2.5, 3, 4, 5, 6 22956260 8 2, 2.5, 3, 4, 5, 6, 8, 10 229

108

FORGED T-HANDLES

INDIVIDUAL FORGED T-HANDLES

Item Key Sizes Key Length Item Key Sizes Key LengthNumber (Inch) (Inch) Number (Inch) (Inch)56044 3/32 556046 7/64 556048 1/8 556050 9/64 556052 5/32 5

56054 3/16 656056 7/32 656058 1/4 656060 5/16 756062 3/8 7

HANDI-HEX™ DRIVERS

Item Key Sizes Item Key SizesNumber (Inch) Number (Inch)57400 .02857402 .03557404 .05057406 1/1657408 5/64

57410 3/3257412 7/6457414 1/857416 9/64

INDIVIDUAL HANDI-HEX™ DRIVERSHandi-Hex Drivers are designed for general use and pro-duction assembly operations using socket screw products.Versatile drivers feature adjustable, replaceable Allen Bits.Each handle identified by bit size. Includes key for bitchange or adjustment.

109

STRAIGHT BITS

REPLACEMENT STRAIGHT BITS

Item Key Sizes Key Length Item Key Sizes Key LengthNumber (Inch) (Inch) Number (Inch) (Inch)57900 .028 257902 .035 257904 .050 357906 1/16 357908 1/16 657910 5/64 357912 5/64 657914 3/32 357197 3/32 557918 3/32 657920 7/64 357199 7/64 5

57926 1/8 357201 1/8 557932 9/64 357203 9/64 557205 5/32 557942 5/32 657207 3/16 657209 7/32 657211 1/4 657213 5/16 757215 3/8 7

HEX KEY ASSORTMENTItem Number: 56882An assortment of 9 popular sizes of hex keys.Contains 270 wrenches.

Key Sizes Quantity(Inch) In Box5/64 503/32 501/8 505/32 253/16 257/32 251/4 255/16 103/8 10

METRIC HEX KEY ASSORTMENTItem Number: 56890An assortment of 7 popular metric hex keys.Contains 175 keys.

Key Sizes Quantity(mm) In Box1.5 252 25

2.5 253 254 255 256 25

HEX KEY ASSORTMENTS

110

GENERAL USE TOOLS& DISPLAYS

■ IN THIS SECTION: Allen general use tools are listed in the order below:

• Hacksaws• Pliers

• Nut drivers• Screwdrivers• Punches, chisels, bars• Hammers• Tool storage • Merchandising displays

Rugged diecast constructionand tubular steel preventsblade bending and twistingfor long-lasting durability.

Extra blade can bestored in handle.

High tension wheel maximizesblade life by keeping it rigidlonger so it stays sharper.

Contoured gripprovides morecomfort and lessfatigue.

DISPLAYSAllen™ offers one of the most comprehen-sive merchandising programs in the industry.Choose from a wide variety of popular, fastmoving products attractively displayed on colorful Display Boards and eye-catchingStep-Out Racks. Our versatile, hard-sellingAllen merchandising displays allow you tomerchandise a complete line of tools usinga minimum amount of space.

GENERAL USE TOOLS & DISPLAYS

HACKSAW

General Use Tools and tool storage items are proudly made in the U.S.A. and feature a lifetime warranty.

Blade can be repositioned forflush cutting applications.

112

113

HACKSAWS

CHALLENGER — HEAVY DUTY

WeightNumber Length (lbs)61015 16.50 1.12

ADJUSTABLE — MEDIUM DUTY


CORVETTE — LIGHT DUTY


HACKSAW BLADES

Number Description Length Quantity Number Description Length Quantity61214 Carbon - 24 Teeth 10" 10 61229 Bimetal - 24 Teeth 10" 561226 Carbon - 18 Teeth 12" 10 61230 Bimetal - 18 Teeth 12" 561227 Carbon - 24 Teeth 12" 10 61231 Bimetal - 24 Teeth 12" 561228 Carbon - 32 Teeth 12" 10 61232 Bimetal - 32 Teeth 12" 5

PLIERS

SLIP JOINT

WeightNumber Length (lbs)25106 6.00 .3825108 8.00 .50

ASME B107.23M-1991

114

PLIERS

RIB LOCK

WeightNumber Length (lbs)25310 10.00 .7525316 16.00 1.00

Fed. Std. GGG-P-471e ASME B107.23M-1991

DIAGONAL CUTTING

WeightNumber Length (lbs)25404 5.00 .2525406 6.00 .3825407 7.00 .50

HEAVY DUTY DIAGONAL CUTTING

WeightNumber Length (lbs)25207 7.00 .50

LINESMAN

WeightNumber Length (lbs)25208 8.00 .81

CHAIN NOSE PLIERS WITH CUTTER

WeightNumber Length (lbs)25206 6.50 .3125608 8.00 .44

115

SCREWDRIVERS

CABINET TIP — SLOTTED

Item Overall WeightNumber Description Length (lbs)30833 3/16" x 3" 5 3/4" .0630834 3/16" x 6" 9 1/2" .12

ANSI Spec. B107.15

PHILLIPS TIP

Item Overall WeightNumber Description Length (lbs)30835 #0 x 2 1/2" w/clip 4 3/8" .0630836 #1 x 3" 6 1/2" .1230837 #2 x 4" 7 1/2" .1930838 #3 x 6" 9 1/2" .31

ANSI Spec. B107.15

ROUND BLADE — SLOTTED

Item Overall WeightNumber Description Length (lbs)30839 1/4" x 4" 8 1/4" .2030840 1/4" x 6" 10 1/4" .4130841 5/16" x 6" 10 3/4" .41

ANSI Spec. B107.15

SQUARE BLADE — SLOTTED

Item Overall WeightNumber Description Length (lbs)30842 5/16" x 6" 10 3/4" .4430843 3/8" x 8" 13" .67

ANSI Spec. B107.15

23 PIECE LIGHTED SCREWDRIVER SETItem Number: 30800

Description DescriptionLighted Screwdriver Handle Hex to 1/4" Dr. Adapter6 Pt. 1/4" Dr. Std. Skt. 3/16" Torx Bit T-156 Pt. 1/4" Dr. Std. Skt. 1/4" Torx Bit T-206 Pt. 1/4" Dr. Std. Skt. 5/16" Torx Bit T-256 Pt. 1/4" Dr. Std. Skt. 11/32" Slotted Bit 3-46 Pt. 1/4" Dr. Std. Skt. 3/8" Slotted Bit 5-66 Pt. 1/4" Dr. Std. Skt. 7/16" Slotted Bit 8-106 Pt. 1/4" Dr. Std. Skt. 6mm Phillips Bit #16 Pt. 1/4" Dr. Std. Skt. 7mm Phillips Bit #26 Pt. 1/4" Dr. Std. Skt. 8mm Phillips Bit #36 Pt. 1/4" Dr. Std. Skt. 9mm High density polyethylene case6 Pt. 1/4" Dr. Std. Skt. 10mm Total Weight: 1.16 lbs.6 Pt. 1/4" Dr. Std. Skt. 11mm

Replacement Part: #3172570 Bulb Assembly

116

COMBINATION SCREWDRIVER SETS

6 PIECE SETItem Number: 30846

Number Description30833 3/16" x 3" Cabinet30836 #1 x 3" Phillips30837 #2 x 4" Phillips30838 #3 x 6" Phillips30839 1/4" x 4" Round Blade30840 1/4" x 6" Round Blade

Storage TrayTotal Weight 1.62 lb

8 PIECE SETItem Number: 30847

Number Description30833 3/16" x 3" Cabinet30836 #1 x 3" Phillips30837 #2 x 4" Phillips30838 #3 x 6" Phillips30839 1/4" x 4" Round Blade30841 5/16" x 6" Round Blade30844 1/4" x 1 1/2" Stubby30845 #2 x 1 1/2" Phillips

Storage TrayTotal Weight 1.73 lb

NUT DRIVERS

7 PIECE — SOLID SHAFT NUT DRIVER SETItem Number: 30820

Number Description30802 Nut Driver 3/16"30804 Nut Driver 1/4"30806 Nut Driver 5/16"30807 Nut Driver 11/32"30808 Nut Driver 3/8"30809 Nut Driver 7/16"30810 Nut Driver 1/2"


7 PIECE — METRIC SOLID SHAFT NUT DRIVER SETItem Number: 30821

Number Description30854 Nut Driver 5mm30856 Nut Driver 6mm30857 Nut Driver 7mm30858 Nut Driver 8mm30859 Nut Driver 9mm30860 Nut Driver 10mm30861 Nut Driver 11mm


All items above available as open stock

PHILLIPS STUBBY

Item Overall WeightNumber Description Length (lbs)30845 #2 x 1 1/2" 3 1/2" .12

ANSI Spec. B107.15

SCREWDRIVERS

SLOTTED STUBBY

Item Overall WeightNumber Description Length (lbs)30844 1/4" x 1 1/2" 3 1/2" .25

ANSI Spec. B107.15

117

PUNCHES

PIN PUNCHES

Item Hex WeightNumber Point Size Length (lbs)25623 1/16 5/16 4 1/4 .1225624 3/32 5/16 4 3/4 .1225625 1/8 5/16 5 .1225626 5/32 5/16 5 1/4 .1225627 3/16 5/16 5 1/2 .1225628 1/4 3/8 7 .1925629 5/16 1/2 7 .31

Fed. Std. GGG-C-00313b

LONG TAPER (DRIFT) PUNCHES

Item Hex WeightNumber Point Size Length (lbs)25631 1/8 3/8 8 .1925632 5/32 1/2 8 1/2 .3825633 3/16 1/2 9 .3825634 1/4 5/8 11 .7525635 5/16 5/8 11 .75


SOLID PUNCHES

Item Hex WeightNumber Point Size Length (lbs)25637 1/16 5/16 4 1/2 .0625638 3/32 5/16 4 1/2 .0625639 1/8 5/16 4 1/2 .0625640 5/32 3/8 5 .1225641 3/16 3/8 5 .1225642 1/4 1/2 6 .2525643 5/16 5/8 7 .5025644 3/8 3/4 8 .88


PRICK PUNCH

Item Hex WeightNumber Size Length (lbs)25645 3/8 5 .12


CENTER PUNCHES

Item Hex WeightNumber Size Length (lbs)25646 1/4 4 1/4 .0625647 3/8 5 .1225648 1/2 6 .31


B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

118

CHISELS

COLD CHISELS

Item Hex WeightNumber Cut Size Length (lbs)25649 1/4 1/4 4 3/4 .0625650 5/16 5/16 5 .1225651 3/8 5/16 5 1/4 .1225652 7/16 3/8 5 1/2 .1925653 1/2 3/8 6 .1925654 5/8 1/2 6 1/2 .3825655 3/4 5/8 7 .6325656 7/8 3/4 7 1/2 .8825657 1 7/8 8 1.31

Fed. Std. GGG-P-831e

DIAMOND POINT CHISELS

Item Hex WeightNumber Cut Size Length (lbs)25659 3/16 3/8 5 .1925660 1/4 3/8 6 .38


ROUND NOSE CHISEL

Item Hex WeightNumber Cut Size Length (lbs)25661 1/4 3/8 5 1/2 .19


CAPE CHISELS

Item Hex WeightNumber Cut Size Length (lbs)25662 1/4 3/8 5 1/2 .1925663 3/8 1/2 6 1/2 .38


LONG COLD CHISELS

Item Hex WeightNumber Cut Size Length (lbs)25664 3/4 5/8 12 1.1225665 7/8 3/4 12 1.56


B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

119

CHISELS

RIVET BUSTER

Item Hex WeightNumber Cut Size Length (lbs)25666 3/4 5/8 12 1.12


PINCH BARS

Item Hex WeightNumber Size Length (lbs)25667 1/2 14 .6825668 5/8 16 1.1925669 3/4 20 1.31

ROLL BARS

Item Hex WeightNumber Size Length (lbs)25670 1/2 15 .8125671 5/8 18 1.56

GOOSENECK WRECKING BARS

Item Hex WeightNumber Size Length (lbs)25672 5/8 18 225673 3/4 24 425674 3/4 36 5

PRYBAR/NAIL PULLER

Item WeightNumber Length (lbs)25675 14 1/2 .44

BARS

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

120

COMBINATION PUNCH AND CHISEL SETS

12 PIECE — COMBINATION PUNCHAND CHISEL SETItem Number: 25677

Total WeightNumber Description (lbs)25651 3/8 x 5/16 x 5 1/4 Cold chisel 3.4425653 1/2 x 3/8 x 6 Cold chisel25655 3/4 x 5/8 x 7 Cold chisel25656 7/8 x 3/4 x 7 1/2 Cold chisel25647 3/8 x 5 Center punch25633 3/16 x 1/2 x 9 Long Taper punch25624 3/32 X 5/16 X 4 3/4 Pin punch25625 1/8 x 5/16 x 5 Pin punch25627 3/16 x 5/16 x 5 1/2 Pin punch25628 1/4 x 3/8 x 7 Pin punch25639 1/8 x 5/16 x 4 1/2 Solid punch25642 1/4 x 1/2 x 6 Solid punch

Roll

27 PIECE COMBINATION PUNCHAND CHISEL SETItem Number: 25678

Total WeightNumber Description (lbs)25651 3/8 x 5/16 x 5 1/4 Cold chisel 10.8725652 7/16 x 3/8 x 5 1/2 Cold chisel25653 1/2 x 3/8 x 6 Cold chisel25654 5/8 x 1/2 x 6 1/2 Cold chisel25655 3/4 x 5/8 x 7 Cold chisel25656 7/8 x 3/4 x 7 1/2 Cold chisel25657 1 x 7/8 x 8 Cold chisel25664 3/4 x 5/8 x 12 Long cold chisel25647 3/8 x 5 Center punch25648 1/2 x 6 Center punch25645 3/8 x 5 Prick punch25624 3/32 x 5/16 x 4 3/4 Pin punch25625 1/8 x 5/16 x 5 Pin punch25626 5/32 x 5/16 x 5 1/4 Pin punch25627 3/16 x 5/16 x 5 1/2 Pin punch25628 1/4 x 3/8 x 7 Pin punch25629 5/16 x 1/2 x 7 Pin punch25632 5/32 x 1/2 x 8 1/2 Long Taper punch25633 3/16 x 1/2 x 9 Long Taper punch25634 1/4 x 5/8 x 11 Long Taper punch25635 5/16 x 5/8 x 11 Long Taper punch25639 1/8 x 5/16 x 4 1/2 Solid punch25640 5/32 x 3/8 x 5 Solid punch25641 3/16 x 3/8 x 5 Solid punch25642 1/4 x 1/2 x 6 Solid punch25643 5/16 x 5/8 x 7 Solid punch25644 3/8 x 3/4 x 8 Solid punch

Roll

B L A C K

OXTM

B L A C K

OXTM

121

PUNCH AND CHISEL SETS

5 PIECE — COMBINATION PUNCHAND CHISEL SETItem Number: 25676

Total WeightNumber Description (lbs)25651 3/8 x 5/16 x 5 1/4 Cold chisel .9425654 5/8 x 1/2 x 6 1/2 Cold chisel25647 3/8 x 5 Center punch25627 3/16 x 5/16 x 5 1/2 Pin punch25641 3/16 x 3/8 x 5 Solid punch

Pouch

6 PIECE — PIN PUNCH SETItem Number: 25630

Total WeightNumber Description (lbs)25624 3/32 x 5/16 x 4 3/4 Pin punch .9425625 1/8 x 5/16 x 5 Pin punch25626 5/32 x 5/16 x 5 1/4 Pin punch25627 3/16 x 5/16 x 5 1/2 Pin punch25628 1/4 x 3/8 x 7 Pin punch25629 5/16 x 1/2 x 7 Pin punch

Pouch

4 PIECE LONG TAPER PUNCH SETItem Number: 25636

Total WeightNumber Description (lbs)25631 1/8 x 3/8 x 8 Long Taper punch 1.6925632 5/32 x 1/2 x 8 1/2 Long Taper punch25633 3/16 x 1/2 x 9 Long Taper punch25634 1/4 x 5/8 x 11 Long Taper punch

Pouch

6 PIECE — COLD CHISEL SETItem Number: 25658

Total WeightNumber Description (lbs)25649 1/4 x 1/4 x 4 3/4 Cold chisel 1.6324651 3/8 x 5/16 x 5 1/4 Cold chisel24652 7/16 x 3/8 x 5 1/2 Cold chisel24653 1/2 x 3/8 x 6 Cold chisel24654 5/8 x 1/2 x 6 1/2 Cold chisel25655 3/4 x 5/8 x 7 Cold chisel

Pouch

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

B L A C K

OXTM

122

HAMMERS

BALL PEIN — WOOD HANDLE

Item Head Length WeightNumber Weight (Inches) (lbs)25700 2 oz 10 .2525701 4 oz 10 1/4 .3625702 8 oz 12 1/4 .7525703 12 oz 13 1/2 1.1225704 16 oz 14 1/4 1.3125705 20 oz 14 1/2 1.6325706 24 oz 15 1/2 1.9425707 32 oz 16 2.3825708 40 oz 16 2.8125709 48 oz 16 3.56ANSI Spec. B173.2

CROSS PEIN — WOOD HANDLE

Item Head Length WeightNumber Weight (Inches) (lbs)25710 3 lb 14 3.31

DRILLING HAMMER — WOOD HANDLE

Item Head Length WeightNumber Weight (Inches) (lbs)25711 2 lb 10 2.2525712 3 lb 10 3.3125713 4 lb 10 4.25

SOFT FACE HAMMER

Item Head Length Face Dia. WeightNumber Weight (Inches) (Inches) (lbs)25716 12 oz 11 5/8 1 1/4 .940

RUBBER MALLET

Item Head Length WeightNumber Weight (Inches) (lbs)25714 20 oz 13 1/2 1.3125715 28 oz 16 1/2 2

123

TOOL STORAGE

METAL BOXES

Item DimensionsNumber Length Depth Height19750 6.25 2.50 1.2519751 12.00 14.50 2.0019752 16.63 4.75 2.1319753 21.00 6.13 2.6319754 20.25 7.50 5.63

SOCKET CLIP RAILS

Item Drive No. ofNumber Type Size Length Clips19755 Standard 1/4" 7.50 919756 Standard 3/8" 11.00 1019757 Standard 1/2" 17.00 1119763 Magnetic All 17.00

TOOL POUCHES

Item DimensionsNumber Type Length Height19758 Open Pouch 10.25 4.4419759 9 piece19760 11 piece19761 14 piece

Refer to page 22 for additional Allen Tool Storage options.

124

DISPLAYS

100 PIECE 1/4" AND 3/8" DRIVE TOOLSAND SOCKETS BOARDItem Number: 19700Contains one each

Number Description Number Description10022 1/4" Dr. 6 Pt. 3/16" Socket10023 1/4" Dr. 6 Pt. 7/32" Socket10024 1/4" Dr. 6 Pt. 1/4" Socket10025 1/4" Dr. 6 Pt. 9/32" Socket10026 1/4" Dr. 6 Pt. 5/16" Socket10027 1/4" Dr. 6 Pt. 11/32" Socket10028 1/4" Dr. 6 Pt. 3/8" Socket10029 1/4" Dr. 6 Pt. 7/16" Socket10030 1/4" Dr. 6 Pt. 1/2" Socket10052 1/4" Dr. 6 Pt. Deep, 3/16" Socket10053 1/4" Dr. 6 Pt. Deep, 7/32" Socket10054 1/4" Dr. 6 Pt. Deep, 1/4" Socket10055 1/4" Dr. 6 Pt. Deep, 9/32" Socket10056 1/4" Dr. 6 Pt. Deep, 5/16" Socket10057 1/4" Dr. 6 Pt. Deep, 11/32" Socket10058 1/4" Dr. 6 Pt. Deep, 3/8" Socket10059 1/4" Dr. 6 Pt. Deep, 7/16" Socket10060 1/4" Dr. 6 Pt. Deep, 1/2" Socket10102 1/4" Dr. 6 Pt. 4mm Socket10104 1/4" Dr. 6 Pt. 5mm Socket10106 1/4" Dr. 6 Pt. 6mm Socket10107 1/4" Dr. 6 Pt. 7mm Socket10108 1/4" Dr. 6 Pt. 8mm Socket10109 1/4" Dr. 6 Pt. 9mm Socket10110 1/4" Dr. 6 Pt. 10mm Socket10111 1/4" Dr. 6 Pt. 11mm Socket10112 1/4" Dr. 6 Pt. 12mm Socket10113 1/4" Dr. 6 Pt. 13mm Socket10152 1/4" Dr. 6 Pt. Deep, 4mm Socket10154 1/4" Dr. 6 Pt. Deep, 5mm Socket10156 1/4" Dr. 6 Pt. Deep, 6mm Socket10157 1/4" Dr. 6 Pt. Deep, 7mm Socket10158 1/4" Dr. 6 Pt. Deep, 8mm Socket10159 1/4" Dr. 6 Pt. Deep, 9mm Socket10160 1/4" Dr. 6 Pt. Deep, 10mm Socket10161 1/4" Dr. 6 Pt. Deep, 11mm Socket10162 1/4" Dr. 6 Pt. Deep, 12mm Socket10163 1/4" Dr. 6 Pt. Deep, 13mm Socket10164 1/4" Dr. 6 Pt. Deep, 14mm Socket10900 1/4" Dr. Quick Release Ratchet10905 1/4" Dr. 3" Extension10910 1/4" Dr. 6" Extension10915 1/4" Dr. Spinner Handle

10920 1/4" Dr. Flex Handle10925 1/4" Drive 1/4" to 3/8" Inc. Adapter10930 1/4" Dr. Universal Joint10940 1/4" Dr. Flexible Spinner11206 3/8" Dr. 12 Pt. 5/16" Socket11208 3/8" Dr. 12 Pt. 3/8" Socket11209 3/8" Dr. 12 Pt. 7/16" Socket11210 3/8" Dr. 12 Pt. 1/2" Socket11211 3/8" Dr. 12 Pt. 9/16" Socket11212 3/8" Dr. 12 Pt. 5/8" Socket11213 3/8" Dr. 12 Pt. 11/16" Socket11214 3/8" Dr. 12 Pt. 3/4" Socket11215 3/8" Dr. 12 Pt. 13/16" Socket11216 3/8" Dr. 12 Pt. 7/8" Socket11258 3/8" Dr. 12 Pt. Deep, 3/8" Socket11259 3/8" Dr. 12 Pt. Deep, 7/16" Socket11260 3/8" Dr. 12 Pt. Deep, 1/2" Socket11261 3/8" Dr. 12 Pt. Deep, 9/16" Socket11262 3/8" Dr. 12 Pt. Deep, 5/8" Socket11263 3/8" Dr. 12 Pt. Deep, 11/16" Socket11264 3/8" Dr. 12 Pt. Deep, 3/4" Socket11265 3/8" Dr. 12 Pt. Deep, 13/16" Socket11266 3/8" Dr. 12 Pt. Deep, 7/8" Socket11309 3/8" Dr. 12 Pt. 9mm Socket11310 3/8" Dr. 12 Pt. 10mm Socket11311 3/8" Dr. 12 Pt. 11mm Socket11312 3/8" Dr. 12 Pt. 12mm Socket11313 3/8" Dr. 12 Pt. 13mm Socket11314 3/8" Dr. 12 Pt. 14mm Socket11315 3/8" Dr. 12 Pt. 15mm Socket11316 3/8" Dr. 12 Pt. 16mm Socket11317 3/8" Dr. 12 Pt. 17mm Socket11318 3/8" Dr. 12 Pt. 18mm Socket11319 3/8" Dr. 12 Pt. 19mm Socket11321 3/8" Dr. 12 Pt. 21mm Socket11359 3/8" Dr. 12 Pt. Deep, 9mm Socket11360 3/8" Dr. 12 Pt. Deep, 10mm Socket11361 3/8" Dr. 12 Pt. Deep, 11mm Socket11362 3/8" Dr. 12 Pt. Deep, 12mm Socket11363 3/8" Dr. 12 Pt. Deep, 13mm Socket11364 3/8" Dr. 12 Pt. Deep, 14mm Socket11365 3/8" Dr. 12 Pt. Deep, 15mm Socket11366 3/8" Dr. 12 Pt. Deep, 16mm Socket

Number Description11367 3/8" Dr. 12 Pt. Deep, 17mm Socket11368 3/8" Dr. 12 Pt. Deep, 18mm Socket11369 3/8" Dr. 12 Pt. Deep, 19mm Socket11412 3/8" Dr. 5/8" 6 Pt. Spk. Plug Socket11415 3/8" Dr. 13/16" 6 Pt. Spk. Plug Socket11900 3/8" Dr. Quick Release Ratchet11905 3/8" Dr. 3" Extension11910 3/8" Dr. 6" Extension11912 3/8" Dr. 10" Extension11920 3/8" Dr. Flex Handle11922 3/8" Dr. Flex Head Quick Release Ratchet11925 3/8" Dr. 3/8" x 1/2" Inc. Adapter11927 3/8" Dr. 3/8" x 1/4" Red. Adapter11930 3/8" Dr. Universal Joint

125

DISPLAYS

70 PIECE 1/2" & 3/4" DRIVE IMPACT DISPLAY BOARDItem Number: 19770Contains one each

Number Description Number Description35008 1/2" Dr. 3/8" Impact Socket35009 1/2" Dr. 7/16" Impact Socket35010 1/2" Dr. 1/2" Impact Socket35011 1/2" Dr. 9/16" Impact Socket35012 1/2" Dr. 5/8" Impact Socket35013 1/2" Dr. 11/16" Impact Socket35014 1/2" Dr. 3/4" Impact Socket35015 1/2" Dr. 13/16" Impact Socket35016 1/2" Dr. 7/8" Impact Socket35017 1/2" Dr. 15/16" Impact Socket35018 1/2" Dr. 1" Impact Socket35019 1/2" Dr. 1-1/16" Impact Socket35020 1/2" Dr. 1-1/18" Impact Socket35058 1/2" Dr. 3/8" Deep Impact Socket35059 1/2" Dr. 7/16" Deep Impact Socket35060 1/2" Dr. 1/2" Deep Impact Socket35061 1/2" Dr. 9/16" Deep Impact Socket35062 1/2" Dr. 5/8" Deep Impact Socket35063 1/2" Dr. 11/16" Deep Impact Socket35064 1/2" Dr. 3/4" Deep Impact Socket35065 1/2" Dr. 13/16" Deep Impact Socket35066 1/2" Dr. 7/8" Deep Impact Socket35067 1/2" Dr. 15/16" Deep Impact Socket35068 1/2" Dr. 1" Deep Impact Socket35069 1/2" Dr. 1-1/6" Deep Impact Socket35111 1/2" Dr. 11mm Impact Socket35112 1/2" Dr. 12mm Impact Socket35113 1/2" Dr. 13mm Impact Socket35114 1/2" Dr. 14mm Impact Socket35115 1/2" Dr. 15mm Impact Socket

35117 1/2" Dr. 17mm Impact Socket35119 1/2" Dr. 19mm Impact Socket35120 1/2" Dr. 20mm Impact Socket35121 1/2" Dr. 21mm Impact Socket35122 1/2" Dr. 22mm Impact Socket35124 1/2" Dr. 24mm Impact Socket35127 1/2" Dr. 27mm Impact Socket35180 1/2" Dr. 30mm Deep Impact Socket35186 1/2" Dr. 36mm Deep Impact Socket36114 3/4" Dr. 3/4" Impact Socket36115 3/4" Dr. 13/16" Impact Socket36116 3/4" Dr. 7/8" Impact Socket36117 3/4" Dr. 15/16" Impact Socket36118 3/4" Dr. 1" Impact Socket36119 3/4" Dr. 1-1/16" Impact Socket36120 3/4" Dr. 1-1/8" Impact Socket36121 3/4" Dr. 1-3/16" Impact Socket36122 3/4" Dr. 1-1/4" Impact Socket36123 3/4" Dr. 1-5/16" Impact Socket36124 3/4" Dr. 1-3/8" Impact Socket36125 3/4" Dr. 1-7/16" Impact Socket36126 3/4" Dr. 1-1/2" Impact Socket36164 3/4" Dr. 3/4" Deep Impact Socket36165 3/4" Dr. 13/16" Deep Impact Socket36166 3/4" Dr. 7/8" Deep Impact Socket36167 3/4" Dr. 15/16" Deep Impact Socket36168 3/4" Dr. 1" Deep Impact Socket36169 3/4" Dr. 1-1/16" Deep Impact Socket36170 3/4" Dr. 1-1/8" Deep Impact Socket36172 3/4" Dr. 1-1/4" Deep Impact Socket

58 PIECE 1/2" DRIVE TOOLS AND SOCKETS BOARDItem Number: 19705Contains one each

Number Description Number Description12208 1/2" Dr. 12 Pt. 3/8" Socket12209 1/2" Dr. 12 Pt. 7/16" Socket12210 1/2" Dr. 12 Pt. 1/2" Socket12211 1/2" Dr. 12 Pt. 9/16" Socket12212 1/2" Dr. 12 Pt. 5/8" Socket12213 1/2" Dr. 12 Pt. 11/16" Socket12214 1/2" Dr. 12 Pt. 3/4" Socket12215 1/2" Dr. 12 Pt. 13/16" Socket12216 1/2" Dr. 12 Pt. 7/8" Socket12217 1/2" Dr. 12 Pt. 15/16" Socket12218 1/2" Dr. 12 Pt. 1" Socket12219 1/2" Dr. 12 Pt. 1 1/16" Socket12220 1/2" Dr. 12 Pt. 1 1/8" Socket12222 1/2" Dr. 12 Pt. 1 1/4" Socket12260 1/2" Dr. 12 Pt. Deep, 1/2" Socket12261 1/2" Dr. 12 Pt. Deep, 9/16" Socket12262 1/2" Dr. 12 Pt. Deep, 5/8" Socket12263 1/2" Dr. 12 Pt. Deep, 11/16" Socket12264 1/2" Dr. 12 Pt. Deep, 3/4" Socket12265 1/2" Dr. 12 Pt. Deep, 13/16" Socket12266 1/2" Dr. 12 Pt. Deep, 7/8" Socket12267 1/2" Dr. 12 Pt. Deep, 15/16" Socket12268 1/2" Dr. 12 Pt. Deep, 1" Socket12269 1/2" Dr. 12 Pt. Deep, 1 1/16" Socket12270 1/2" Dr. 12 Pt. Deep, 1 1/8" Socket

12309 1/2" Dr. 12 Pt. 9mm Socket12310 1/2" Dr. 12 Pt. 10mm Socket12311 1/2" Dr. 12 Pt. 11mm Socket12312 1/2" Dr. 12 Pt. 12mm Socket12313 1/2" Dr. 12 Pt. 13mm Socket12314 1/2" Dr. 12 Pt. 14mm Socket12315 1/2" Dr. 12 Pt. 15mm Socket12316 1/2" Dr. 12 Pt. 16mm Socket12317 1/2" Dr. 12 Pt. 17mm Socket12318 1/2" Dr. 12 Pt. 18mm Socket12319 1/2" Dr. 12 Pt. 19mm Socket12320 1/2" Dr. 12 Pt. 20mm Socket 12321 1/2" Dr. 12 Pt. 21mm Socket12322 1/2" Dr. 12 Pt. 22mm Socket12323 1/2" Dr. 12 Pt. 23mm Socket12324 1/2" Dr. 12 Pt. 24mm Socket12325 1/2" Dr. 12 Pt. 25mm Socket12326 1/2" Dr. 12 Pt. 26mm Socket12327 1/2" Dr. 12 Pt. 27mm Socket12328 1/2" Dr. 12 Pt. 28mm Socket12330 1/2" Dr. 12 Pt. 30mm Socket12332 1/2" Dr. 12 Pt. 32mm Socket12412 1/2" Dr. 5/8" Spk. Plug Socket12415 1/2" Dr. 13/16" Spk. Plug Socket

Number Description12800 1/2" Dr. Quick Release Ratchet12802 1/2" Dr. Flex Head Quick Release Ratchet12805 1/2" Dr. 3" Extension12810 1/2" Dr. 6" Extension12812 1/2" Dr. 10" Extension12820 1/2" Dr. 15" Flex Handle12827 1/2" Dr. 1/2" x 3/8" Red. Adapter12828 1/2" Dr. 1/2" x 3/4" Inc. Adapter12830 1/2" Dr. Universal Joint

Number Description36176 3/4" Dr. 1-1/2" Deep Impact Socket36276 3/4" Dr. 1-1/2" Budd Wheel Socket35203 1/2" Dr. 3" Impact Extension35206 1/2" Dr. 6" Impact Extension35207 1/2" Dr. Impact Universal Joint36207 3/4" Dr. 7" Impact Extension531300 1/2" Dr. 3/4" X 13/16" Dbl. End Rev.741825 3/4" Dr. O-Ring751826 1" Dr. O-Ring741828 3/4" Dr. Retaining Pin

126

DISPLAYS

27 PIECE 3/4" DRIVE TOOLS AND SOCKETS BOARDItem Number: 19710Contains one each

Number Description Number Description13203 3/4" Dr. 12 Pt. 15/16" Socket13204 3/4" Dr. 12 Pt. 1" Socket13205 3/4" Dr. 12 Pt. 1 1/16" Socket13206 3/4" Dr. 12 Pt. 1 1/8" Socket13207 3/4" Dr. 12 Pt. 1 3/16" Socket13208 3/4" Dr. 12 Pt. 1 1/4" Socket13209 3/4" Dr. 12 Pt. 1 5/16" Socket13210 3/4" Dr. 12 Pt. 1 3/8" Socket13211 3/4" Dr. 12 Pt. 1 7/16" Socket13212 3/4" Dr. 12 Pt. 1 1/2" Socket13213 3/4" Dr. 12 Pt. 1 9/16" Socket13214 3/4" Dr. 12 Pt. 1 5/8" Socket13215 3/4" Dr. 12 Pt. 1 11/16" Socket13216 3/4" Dr. 12 Pt. 1 3/4" Socket

13217 3/4" Dr. 12 Pt. 1 13/16" Socket13218 3/4" Dr. 12 Pt. 1 7/8" Socket13220 3/4" Dr. 12 Pt. 2" Socket13222 3/4" Dr. 12 Pt. 2 1/8" Socket13224 3/4" Dr. 12 Pt. 2 1/4" Socket13900 3/4" Dr. Quick Release Ratchet13910 3/4" Dr. 5" Extension13912 3/4" Dr. 8" Extension13914 3/4" Dr. 16" Extension13920 3/4" Dr. 19" Flex Handle13922 3/4" Dr. Sliding T-Handle13927 3/4" Dr. 3/4" x 1/2" Red. Adapter13928 3/4" Dr. 3/4" x 1" Inc. Adapter

32 PIECE — FULL POLISH COMBINATION WRENCH BOARDItem Number: 19718Contains one each

Number Description Number Description20413 Full Polish Combo Wr. 7mm 20470 Full Polish Combo Wr. 1/4”20414 Full Polish Combo Wr. 8mm 20471 Full Polish Combo Wr. 5/16”20415 Full Polish Combo Wr. 9mm 20472 Full Polish Combo Wr. 3/8”20416 Full Polish Combo Wr. 10mm 20473 Full Polish Combo Wr. 7/1620417 Full Polish Combo Wr. 11mm 20474 Full Polish Combo Wr. 1/2”20418 Full Polish Combo Wr. 12mm 20475 Full Polish Combo Wr. 9/16”20419 Full Polish Combo Wr. 13mm 20476 Full Polish Combo Wr. 5/8”20420 Full Polish Combo Wr. 14mm 20477 Full Polish Combo Wr. 11/16”20421 Full Polish Combo Wr. 15mm 20478 Full Polish Combo Wr. 3/4”20422 Full Polish Combo Wr. 16mm 20479 Full Polish Combo Wr. 13/16”20423 Full Polish Combo Wr. 17mm 20480 Full Polish Combo Wr. 7/8”20424 Full Polish Combo Wr. 18mm 20481 Full Polish Combo Wr. 15/16”20425 Full Polish Combo Wr. 19mm 20482 Full Polish Combo Wr. 1”20426 Full Polish Combo Wr. 20mm 20483 Full Polish Combo Wr. 1-1/16”20427 Full Polish Combo Wr. 21mm 20484 Full Polish Combo Wr. 1-1/8”20428 Full Polish Combo Wr. 22mm 20485 Full Polish Combo Wr. 1-1/4”

32 PIECE COMBINATION WRENCH BOARDItem Number: 19715Contains one each

Number Description Number Description20204 Combination Wrench 1/4"20206 Combination Wrench 5/16"20208 Combination Wrench 3/8"20209 Combination Wrench 7/16"20210 Combination Wrench 1/2"20211 Combination Wrench 9/16"20212 Combination Wrench 5/8"20213 Combination Wrench 11/16"20214 Combination Wrench 3/4"20215 Combination Wrench 13/16"20216 Combination Wrench 7/8"20217 Combination Wrench 15/16"20218 Combination Wrench 1"20219 Combination Wrench 1 1/16"20220 Combination Wrench 1 1/8"20222 Combination Wrench 1 1/4"

20307 Combination Wrench 7mm20308 Combination Wrench 8mm20309 Combination Wrench 9mm20310 Combination Wrench 10mm20311 Combination Wrench 11mm20312 Combination Wrench 12mm20313 Combination Wrench 13mm20314 Combination Wrench 14mm20315 Combination Wrench 15mm20316 Combination Wrench 16mm20317 Combination Wrench 17mm20318 Combination Wrench 18mm20319 Combination Wrench 19mm20320 Combination Wrench 20mm20321 Combination Wrench 21mm20322 Combination Wrench 22mm

127

DISPLAYS

10 PIECE LARGE COMBINATION WRENCH DISPLAY BOARDItem Number: 19714

Number Description Quantity20223 1-15/16" Combination Wrench 120224 1-3/8" Combination Wrench 120225 1-7/16" Combination Wrench 120226 1-1/2" Combination Wrench 120228 1-5/8" Combination Wrench 120229 1-11/16" Combination Wrench 120230 1-3/4" Combination Wrench 120231 1-13/16" Combination Wrench 120232 1-7/8" Combination Wrench 120234 2" Combination Wrench 1

27 PIECE OPEN END AND BOX WRENCH BOARDItem Number: 19720Contains one each

Number Description Number Description21004 Open End Wrench 1/4" x 5/16"21008 Open End Wrench 3/8" x 7/16"21010 Open End Wrench 1/2" x 9/16"21012 Open End Wrench 5/8" x 3/4"21013 Open End Wrench 11/16" x 13/16"21014 Open End Wrench 3/4" x 7/8"21017 Open End Wrench 15/16" x 1"21106 Open End Wrench 6mm x 8mm21107 Open End Wrench 7mm x 9mm21110 Open End Wrench 10mm x 11mm21112 Open End Wrench 12mm x 14mm21113 Open End Wrench 13mm x 15mm21116 Open End Wrench 16mm x 17mm21117 Open End Wrench 17mm x 19mm

21118 Open End Wrench 18mm x 19mm21120 Open End Wrench 20mm x 22mm21121 Open End Wrench 21mm x 23mm22204 Box End Wrench 1/4" x 5/16"22208 Box End Wrench 3/8" x 7/16"22209 Box End Wrench 7/16" x 1/2"22210 Box End Wrench 1/2" x 9/16"22211 Box End Wrench 9/16" x 5/8"22212 Box End Wrench 5/8" x 3/4"22213 Box End Wrench 11/16" x 13/16"22214 Box End Wrench 3/4" x 7/8"22215 Box End Wrench 13/16" x 7/8"22217 Box End Wrench 15/16" x 1"

24 PIECE PLIERS AND ADJUSTABLE WRENCH DISPLAY BOARDItem Number: 19716

Number Description Quantity24004 4" Adjustable Wrench 224006 6" Adjustable Wrench 224008 8" Adjustable Wrench 224010 10" Adjustable Wrench 224012 12" Adjustable Wrench 224015 15" Adjustable Wrench 125106 6" Slip Joint Pliers 225108 8" Slip Joint Pliers 225206 6-1/2" Chain Nose Pliers with Cutter 125207 7" Heavy Duty Diagonal Cutting Pliers 125208 8" Linesman Pliers 125310 10" Rib Lock Pliers 125316 16" Rib Lock Pliers 125404 5" Diagonal Cutting Pliers 125406 6" Diagonal Cutting Pliers 125407 7" Diagonal Cutting Pliers 125608 8" Chain Nose Pliers with Cutter 1

128

DISPLAYS

27 PIECE SCREWDRIVERS/NUT DRIVER DISPLAY BOARDITEM NUMBER: 19702Contains one each

Number Description Number Description30833 3/16" x 3" Cabinet Tip30834 3/16" x 6" Cabinet Tip30835 #0 x 2 1/2" Phillips W/Clip30836 #1 x 3" Phillips30837 #2 x 4" Phillips30838 #3 x 6" Phillips30839 1/4" x 4" Round Blade30840 1/4" x 6" Round Blade30841 5/16" x 6" Round Blade30842 5/16" x 6" Square Blade30843 3/8" x 8" Square Blade30844 1/4" x 1 1/2" Stubby30845 #2 x 1 1/2" Stubby Phillips30802 3/16" Nut Driver

30804 1/4" Nut Driver30806 5/16" Nut Driver30807 11/32" Nut Driver30808 3/8" Nut Driver30809 7/16" Nut Driver30810 1/2" Nut Driver30854 5mm Nut Driver30856 6mm Nut Driver30857 7mm Nut Driver30858 8mm Nut Driver30859 9mm Nut Driver30860 10mm Nut Driver30861 11mm Nut Driver

UNIVERSALDISPLAY BOARDItem Number: 90059

21" wide x 27" highPegboard insert, includes slide in headers with Point-of-Purchase messages

SECURITY CABINETItem Number: 90032

23" wide x 30" highComplete with keyed lock

27 PIECE HAMMER, PUNCH & CHISEL DISPLAY BOARDITEM NUMBER: 19701Contains one each

Number Description Number Description25652 Cold Chisel, 7/16" X 3/8" X 5 1/2"25653 Cold Chisel, 1/2" X 3/8" X 6"25654 Cold Chisel, 5/8" X 1/2" X 6 1/2"25655 Cold Chisel, 3/4" X 5/8" X 7"25656 Cold Chisel, 7/8" X 3/4" X 7 1/2"25657 Cold Chisel, 1" X 7/8" X 8"25646 Center Punch, 1/4" X 4 1/4"25647 Center Punch, 3/8" X 5"25648 Center Punch, 1/2" X 6"25625 Pin Punch, 1/8" X 5/16" X 5"25626 Pin Punch, 5/32" X 5/16" X 5 1/4"25627 Pin Punch, 3/16" X 5/16" X 5 1/2"25628 Pin Punch, 1/4" X 3/8" X 7"25632 Drift Punch, 5/32" X 1/2" X 8 1/2"

25633 Drift Punch, 3/16" X 1/2" X 9"25634 Drift Punch, 1/4" X 5/8" X 11"25662 Cape Chisel, 1/4" X 3/8" X 5 1/2"25663 Cape Chisel, 3/8" X 1/2" X 6 1/2"25668 Pinch Bar, 5/8" X 16"25671 Roll Bar, 5/8" X 18"25714 Rubber Mallet, 20 oz. 13 1/2"25651 Cold Chisel, 3/8" X 5/16" X 5 1/4"25702 Ball Pein Hammer, 8 oz. 12 1/4"25704 Ball Pein Hammer, 16 oz. 14 1/4" 25706 Ball Pein Hammer, 24 oz. 15 1/2"25707 Ball Pein Hammer, 32 oz. 16"25716 Soft Face Hammer, 12 oz. 11 5/8"

129

DISPLAYS

45 PIECE HEX KEY SET DISPLAYItem Number 19744

Number Description Quantity56310 12 pc. Short Arm Set 356008 9 pc. Metric Short Arm Set 356152 12 pc. Long Arm Set 356314 8 pc. Standard Fold Up 656316 9 pc. Standard Fold Up 356340 12 pc. Ball End Key Set 356346 9 pc. Duracast Hex Key Fold Up 656347 9 pc. Duracast Hex Key Fold Up 356349 7 pc. Duracast Metric Hex Key Fold Up 356360 7 pc. Metric Fold Up 356369 9 pc. Metric Ball End Set 356384 Duracast Hex Key/Screwdriver Fold Up 356323 7 pc. Torx® Fold Up 3

Display-18" high x 15" wide

33 PIECE HEX KEY SET DISPLAYItem Number: 19747

Number Description Quantity56257 8 pc. 6" T-Handle Set 356258 8 pc. 9" T-Handle Set 356261 5 pc. 6" Metric T-Handle Set 356262 5 pc. 9" Metric T-Handle Set 356314 8 pc. Standard Fold Up 356316 9 pc. Standard Fold Up 356318 9 pc. Long Fold Up 356320 5 pc. Long Fold Up 356360 7 pc. Metric Fold Up 356384 Duracast Hex Key/Screwdriver Fold Up 356323 7 pc. Torx® Fold Up 3

Display - 25" high x 23" wide

30 PIECE HEX KEY SET DISPLAYItem Number 19743

Number Description Quantity56257 8 pc. 6" T-Handle Set 356258 8 pc. 9" T-Handle Set 356314 8 pc. Standard Fold Up 356316 9 pc. Standard Fold Up 356320 5 pc. Long Fold Up 356340 12 pc. Ball End Key Set 356347 9 pc. Duracast Hex Key Fold Up 356349 7 pc. Duracast Metric Hex Key Fold Up 356360 7 pc. Metric Fold Up 356384 Duracast Hex Key/Screwdriver Fold Up 3


130

DISPLAYS


Number Description Quantity56314 8 pc. Standard Fold Up 356316 9 pc. Standard Fold Up 356318 9 pc. Long Fold Up 356320 5 pc. Long Fold Up 356360 7 pc. Metric Fold Up 356323 7 pc. Torx® Fold Up 3



Number Description Quantity56004 7 pc. Short Arm Set 356310 12 pc. Short Arm Set 356008 9 pc. Metric Short Arm Set 356152 12 pc. Long Arm Set 356340 12 pc. Ball End Key Set 356369 9 pc. Metric Ball End Key Set 3



Number Description Quantity56346 9 Pc. Duracast Hex Key Fold Up 356347 9 Pc. Duracast Hex Key Fold Up 356348 7 Pc. Duracast Torx® Key Fold Up 356349 7 Pc. Metric Duracast Hex Key Fold Up 356384 Duracast Hex Key/Screwdriver Fold Up 3


3 PIECE HACKSAW DISPLAYITEM NUMBER: 19741Contains one each

Number Description61010 Adjustable Hacksaw-Adjusts for 10" & 12" Blades61015 Challenger Hacksaw (12" Blade)61017 Corvette Hacksaw - Adjusts for 10" & 12" Blades

60 PIECE HACKSAW BLADE DISPLAYItem Number: 19742

Number Description Quantity61214 Hacksaw Blades, Carbon, 10", 24 Teeth 1061226 Hacksaw Blades, Carbon, 12", 18 Teeth 1061227 Hacksaw Blades, Carbon, 12", 24 Teeth 1061228 Hacksaw Blades, Carbon, 12", 32 Teeth 1061229 Hacksaw Blades, Bimetal, 10", 24 Teeth 561230 Hacksaw Blades, Bimetal, 12", 18 Teeth 561231 Hacksaw Blades, Bimetal, 12", 24 Teeth 561232 Hacksaw Blades, Bimetal, 12", 32 Teeth 5

K-D® TORQUE TOOLS

132

Rubber dust seal at neckkeeps dirt out of innermechanism.

Pliable, elastomer handlegrip provides superiorcomfort and a high resis-tance to oil and grease.

MICROMETERTORQUE WRENCH(Standard micrometertorque wrench shown)

45 tooth ratchet designyields 8° ratchet arc forwork in tight places.

+/- 6% on readingsbetween 20% and 100%

Micrometer typeadjustment

BEAM TYPETORQUE WRENCH

TORQUESCREWDRIVER

Extruded anodizedaluminum body

Chrome finish for long lastingcorrosion resistance.

Micrometer locking ringmaintains setting duringoperation.

Satin finish scalereduces glare foreasier reading.

6% calibration

Palm-fit handle on thefoot/pound version localizesforce for better accuracy.

Ball type handle (not shown)on the inch/pound versionlocalizes force for betteraccuracy.

All torque tools are proudly made in the U.S.A. and feature a limited warranty.

Accurate in the clockwise direc-tion to +/- 3% in the upper 80%of the range (2953 +/- 4%).

■ IN THIS SECTION: Our comprehensive line of torque tools nowincludes a variety of torque screwdrivers.Product categories are listed in the followingorder:

• Micrometer torque wrenches• Micrometer flex torque wrenches• Beam type torque wrenches• Torque multiplier • Torque screwdrivers• Torque angle gauge

K-D® TORQUE TOOLS

133

K-D® TORQUE TOOLS

MICROMETER TORQUE WRENCHES

Item Drive Size English Metric Overall WeightNumber (Inch) Scale Increments Range Increments Length (lbs)

3261 1/4 5-50 In Lb 1 In Lb . . . . . . 8.00 .753262 1/4 30-200 In Lb 1 In Lb . . . . . . 9.50 .752951 3/8 10-100 Ft Lb .5 Ft Lb 16.9-138.9 Nm .7 Nm 17.10 2.003263 3/8 50-250 In Lb 1 In Lb . . . . . . 9.50 .753264 3/8 100-1000 In Lb 5 In Lb 14.1-115.83 Nm .6 Nm 17.10 2.053265 1/2 10-150 Ft Lb 1 Ft Lb 20.3-210.1 Nm 1.4 Nm 20.50 2.502952 1/2 25-250 Ft Lb 1 Ft Lb 43.4-348.4 Nm 1.38 Nm 20.30 2.502953 3/4 100-600 Ft Lb 2.5 Ft Lb 153-830 Nm 3.4 Nm 40.00 10.50

ANSI Spec. B107.14M

MICROMETER FLEX TORQUE WRENCHES


2954 3/8 5-75 Ft Lb .5 Ft Lb 10.2-105.1 Nm .7 Nm 17.1 2.23266 1/2 25-250 Ft Lb 1 Ft Lb 43.4-348.4 Nm 1.4 Nm 20.3 2.7

ANSI Spec. B107.14M

TORQUE-RITE TORQUE WRENCHES


3498 1/2 30-100 Ft Lb 1 Ft Lb 47.45-345.68 Nm 3.36 Nm 22” 3

ANSI Spec. B107.14M

Designed for tough tire shop environments.Tough rubber cover on the head, lock ringand handle provides a cushioning effect to help reduce operator fatigue and tooldamage.

134

K-D® TORQUE TOOLS

BEAM TORQUE WRENCHES


2955 1/4 0-60 In Lb 2.5 In Lb 0-7 Nm .25 Nm 11.00 .52956 3/8 0-600 In Lb 50 In Lb 0-68 Nm 11.3 Nm 16.00 1.02957 1/2 0-150 Ft Lb 5 Ft Lb 0-190 Nm 27 Nm 20.00 2.5

Fed. Std. GGG-W-686 ANSI Spec. B107.14M

TORQUE MULTIPLIER

MultiplierItem Input Output Gear Body Body Body Overall Reaction Weight

Number Drive Drive Ratio Length Width Depth Length Bar Length (lbs)2561 1/2" sq 1" sq 10:1 11.50 6.00 6.00 32.50 24.00 25.25

Ruggedly constructed for precision torquing and toughnut braking jobs from 200 Ft Lb to 2000 Ft Lb (272 Nmto 2720 Nm). Effective multiplication 10:1 +/- 4%. Allgears and shafts in the precision low-stress, timed geartrain are needle bearing mounted for accuracy and longlife. Use with standard torque wrench. Serviceable product.

TORQUE ANGLE GAUGEItem Number: 3336

Use this mechanical gauge with a 1/2" drive tool to install various engineering fastenersthat require a specified angle application after a pre-torque load has been applied. Cali-brated in 5-degree increments, with a rotating pointer, 1/2" male and female square driveand an adjustable holding rod to hold the gauge in position during use. Packaged in aconvenient storage pouch.Caution: Wear eye protection. Do not use with power tools. For intended use only.

TORQUE SCREWDRIVERS

Item Drive English Metric WeightNumber Description Size Scale Graduation Range Graduation (lbs)3416 Pre-Set 1/4" 6-36 In Lb . . . . . . . . . .83417* Adjustable 1/4" 2-100 In Oz 2 . . . . . . .83418* Adjustable 1/4" 2-36 In Lb 0.5 . . . . . . .8

ANSI/ASME B107.14M*Includes Plastic Carrying Case1/4" Drive Female Hex Adapter Included

K-D® SPECIALTY TOOLS

136

A variety of quality K-D tools have been chosen as part of our product offering through the Allencatalog. For a complete selection of K-D products available, please refer to the K-D catalog.

SWIVOIL™ FILTERWRENCHES

Zinc-plated yoke andblackened band forresistance to rustand corrosion.

Swivel handle allowseasier access tohard-to-reach oil filters.

Unique yoke and linkassembly allows for abetter grip withoutcrushing the filter.

PULLERRugged, heavy-duty pullersdesigned for a variety of difficult pulling applications.

K-D Specialty Tools are proudly made in the U.S.A. and feature a lifetime warranty, limited to the repair orreplacement of all non-serviceable products found to be defective in materials or workmanship.

■ IN THIS SECTION: Our line of K-D® brand specialty tools includes abroad selection of products for use in a variety ofindustrial applications. Product categories arelisted in the following order:

• Engine tools• Suspension and drivetrain tools

• Ignition and electrical tools• Brake and wheel tools• Cooling and exhaust tools• Specialty tools• Feeler gauges• Pullers• K-D® hand tools

K-D® SPECIALTY TOOLS

BASIC ENGINE

137

C. UNIVERSAL PULLEY HOLDERItem Number: 3471

A great time saver, this unique tool is designed to trap and holdbolt-on pulleys by the mounting bolts on most applications. Whenused in conjunction with fan clutch wrenches it is especially usefulfor removing and replacing thermostatic fan assemblies while elimi-nating the need for various-sized holding wrenches. Applicationsinclude: Ford trucks with 2.8L, 2.9L, 3.0L, 4.0L, 4.9L and 5.0Lengines; Dodge trucks with 3.9L, 5.2L, 5.9L, 8.0L and V10 engines;GM trucks with 4.3L, 5.0L and 5.7L engines and Jeeps with 5.2Lengines.Caution: Wear safety goggles.

D. 3 PC. FAN CLUTCH WRENCH KITItem Number: 3472

Includes the NEW Universal Pulley Holder #3471 plus KD fan clutchwrenches #3422 and 3136-76. Use to remove and replace thermo-static fan assemblies while eliminating the need for various-sizedholding wrenches. Applications are same as those for UniversalPulley Holder #3471.Caution: Wear safety goggles.

AB

C

D

E

B. MECHANIC’S STETHOSCOPEItem Number: 835

Locates source of engine noise quickly. Listen for trouble by tracingsound of flowing water, oil, gas, or steam. Identify piston slap, worngears, faulty valves, water pump failure, damaged gaskets and defec-tive bearings. Handle is shock-resistant. Disassembles for storage.Extension probe included.Caution: Keep away from moving/rotating and electrical components.

E. COMPRESSION TESTERItem Number: 2428

Checks cylinder compression from 0 to 300 psi (0-21 Kg/cm2).Adapters fit 14mm and 18mm spark plug holes. Special air holdvalve for easy resetting of gauge. 16" rubber hose. Serviceable product.

Replacement part available:2428-75 Gauge

A. FORD DIESEL FAN CLUTCH WRENCHItem Number: 3473

Use in conjunction with the NEW Universal Pulley Holder #3471 toremove and replace thermostatic fan assemblies on Ford trucks with6.9L, 7.3L and 7.3L DIT diesel engines.Caution: Wear safety goggles.

BASIC ENGINE

138

A. ENGINE CYLINDER HONEItem Number: 2833

Hone and remove glaze from engine cylinders from 2" to 7" (51mm to177mm) in diameter. Adjust spring tension for positive cutting action.Set diameter with spread limiter. Includes medium, #240 grit stones.Caution: Wear safety goggles.

B. 14MM CYLINDER HEAD RETHREADER KITItem Number 2125

Repairs damaged 14mm spark plug threads. Open spark plug holewith reamer/tap. Screw insert onto spark plug. Use spark plug sock-et to install spark plug and insert. Remove spark plug and check thatinsert is properly seated. Set includes 1 each of 4 inserts (3/8",7/16", 1/2", and 3/4" reach) and thread locking compound. Tap isdesigned for aluminum heads only. Replacement part part available:2123 14 mm Spark Plug Insert Reamer/Top Caution: Wear safety goggles.

E. 14MM SPARK PLUG RETHREADERItem Number 3379

Use to clean and restore the threads on 14mm spark plug holesprior to installing the spark plug. Tool features extra-long neck toaccess to recessed spark plug cavities. Groove and O-ring hold toolin socket. Use with 3/8” drive tool or 5/8”socket.Caution: Wear safety goggles.

D. 14MM SPARK PLUG THREAD INSERTS

These inserts replace damaged 14mm spark plug threads on alu-minum head engines only. Use with 2123 reamer/tap to repair holes.Includes thread locking compound and one pair of inserts.Caution: Wear safety goggles.

Item No. Description Item No. Description

2126 3/8" long2127 7/16" long

C. 14MM AND 18MM SPARK PLUG OPENING THREAD CHASERItem Number: 730

Cleans and restores 14mm and 18mm spark plug threads. Drive with13/16" socket. Rubber ring eliminates slipping. Services most cars.

2128 1/2" long2129 3/4" long

A

B

CD

E

F. UNIVERSAL VACUUM PVS, TVS VALVEAND OXYGEN SENSOR SOCKETItem Number: 3259

Specially designed socket for removal and replacement of vacuumswitches with a 7/8" hex currently found on Ford, GM, Chrysler, andsome imported vehicles. Tool can also be used to remove andreplace some oxygen sensors. Use with 1/2" square drive tool or7/8" wrench.Caution: Wear safety goggles. Do not use with engine running. Do not usewith power tools. For intended use only.

F

VALVE ENGINE

139

G. UNIVERSAL OVERHEAD VALVE SPRING COMPRESSORItem Number: 2078

Removes valve springs on most cars with overhead valves withoutremoving cylinder head. Offset jaws grip valve spring in parallel com-pression. Tool maintains constant length as spring is compressed.Use with 901 or 2992 air hold fittings to keep valves in place.*See caution note below.

H. VALVE SPRING COMPRESSORItem Number: 3087

Compresses valve springs on most overhead valve engines includ-ing GM, Ford, Chrysler, Nissan, and Toyota. Jaws adjust to fit overspring retaining washer. Adjustable handle allows easy clearance intight areas. GM adapter included. Use 3269 fulcrum rail if overheadcam is not available. Use with 901 or 2992 air hold fittings to keepvalves in place.*See caution note below.

I. AIR HOLD FITTING SETItem Number: 901

Use to apply air pressure to keep valve closed while replacing valvespring. 14mm and 18mm adapters threaded for 1/4" NPT. Removespark plug and screw air hold into port. Fasten air hose to fitting andapply pressure. Use with 912, 915, 2078, 3087, or 3271 valvespring compressors.*See caution note below.

*Caution: Wear safety goggles. Vehicle must be placed in park/neutralbefore applying air pressure, otherwise vehicle may move. Keep handsclear of fan, belts, and pulleys since slight crankshaft rotation will occur.

G

H

I

VALVE ENGINE

140

A. 14MM/18MM AIR HOLD EXTENSION HOSEItem Number: 2992

14" long hose incorporates special 14mm and 18mm stepped fittingwith “O"-ring seals for universal fit and 1/4" NPT fitting for easy con-nection to air lines. Use with 912, 915, 2078, 2400, 3087, and3271 valve spring compressors. Long hose ideal for reaching deepset spark plug holes.Caution: Wear safety goggles. Vehicle must be placed in park/neutralbefore applying air pressure, otherwise vehicle may move. Keep handsclear of fan, belts, and pulleys since slight crankshaft rotation will occur.

B. HEAVY-DUTY HYDRAULIC VALVETAPPET REMOVERItem Number: 2079

Remove most stuck hydraulic valve tappets with this slide hammertype tool. Spread jaws to clamp recessed area of tappet. Use slidehammer to remove. Adapters convert tool to a puller for baked-in valvetappets. Turn adjusting nut with 5/8" wrench. Serviceable product.

Replacement part available:2079-82 Head Assembly

C. QUICKIE HYDRAULIC TAPPET REMOVERItem Number: 2114

Removes valve tappets which are not stuck or baked-in. Tool can beused with most manifolds in place. Place jaws into groove on insideof tappet. Squeeze knob and T-handle and pull to remove. Patented.

A

B

C

FUEL SYSTEM ENGINE

141

D. FUEL PUMP VACUUM AND PRESSURE TESTERItem Number: 2521

Tests for fuel line pressure and vacuum leaks. Check for leakyvalves, timing, fuel pump vacuum and pressure, and gas line leak-age. Easy-to-read gauge with 3' hose and vacuum hose adapter fit-ting. Gauge measures vacuum from 0 to 28" Hg in 1" increments (0 to 700mm Hg in 50mm increments). Measures pressure from 0 to 15 psi in 1/2 psi increments (0-1 Kg/cm2 in .1 Kg/cm2 increments).Caution: Not for use on fuel injected vehicles.

E. CARBURETOR AND DISTRIBUTORADJUSTING TOOLItem Number: 2539

Adjust carburetor mixture and idle speed with screwdriver bit.Hooded end keeps screwdriver from slipping. Use 1/8" hex bit forDelco-Remy external distributor adjustments. Fits GM V-6 and V-8window-type distributors up to 1974. Non-kink flexible shaft lets youreach around obstructions.

F. GM CARBURETOR ADJUSTING TOOLItem Number: 2776

Easily adjusts General Motors C-4 carburetor idle mixture screws.Flexible shaft lets you reach hard-to-get-at screws. Reversible bit fitsDouble D and hex head screws.

D

E F

G

H

H. FUEL LINE QUICK DISCONNECT TOOLItem Number: 3321

Releases the fuel line locking mechanism on 1989 and newer GMvehicles, 1990 and newer Ford vehicles and some 1990 and newerMazda vehicles.Caution: Relieve system pressure before using. Wear eye protection. Forintended use only.

G. FORD AIR CONDITIONING AND FUELLINE SPRING LOCK COUPLING TOOLItem Number: 3290

Most Ford and Chrysler LH series vehicles are equipped with springlock couplings on fuel and air conditioning lines. Necessary toolreleases locking mechanism on all 4 sizes: A (3/4”), B (5/8”), C(1/2”) and D (3/8”).Caution: Wear safety goggles. For intended use only. Do not use withengine running. Release system pressure before disconnecting coupling.

FILTER WRENCHES

142

A. SWIVOIL™ FILTER WRENCHES

Made of high-quality steel, with zinc-plated yoke and blackened bandfor resistance to rust and corrosion. The plastisol dipped handle willnot slide off in use. Even hard-to-reach oil filters will come off easilywith this swivel-handle oil filter wrench. The unique yoke and linkassembly allows a good grip, but will not crush the filter. The swiveltension is adjusted easily, using the nut and bolt on the handle.

Item No. Description

3082 Range: 3 1/2" to 3 7/8" (88.9mm to 98.4mm)3083 Range: 2 7/8" to 3 1/4" (73mm to 82.5mm)3324 Range: 2 1/2" to 3" (63.5mm to 76mm)

B. UNIVERSAL OIL FILTER WRENCHItem Number: 190

Removes oil filters 3 7/16" to 3 3/4" (87mm to 95mm) in diameter. Positive grip lets you exceed normal torque require-ments. Band will not puncture or crush filter.

C. OIL FILTER WRENCHItem Number: 191

Removes oil filters 3 1/16" to 3 7/16" (78mm to 87mm) in diameter.Positive grip lets you exceed normal torque requirements. Band willnot puncture or crush filter.

D. OIL FILTER WRENCHItem Number: 2159

Removes oil filters 2 51/64" to 3 7/64" (71mm to 79mm) in diame-ter. Positive grip lets you exceed normal torque requirements. Bandwill not puncture or crush filter.

E. TRUCK AND TRACTOR OIL FILTERWRENCHItem Number: 2010

Removes oil filters 4" to 4 3/8" (102mm to 111mm) in diameter.Positive grip lets you exceed normal torque requirements. Fits filtersfound on various tractors and trucks. Band will not crush filters.

A

B

C

D

E

FILTER WRENCHES

143

F. ADJUSTABLE OIL FILTER WRENCHItem Number: 2187

3-position wrench removes oil filters from 2 3/4" to 3 3/4" (70mm to95mm) in diameter. Wide range of sizes makes this wrench nearlyuniversal.

G. ADJUSTABLE OIL FILTER WRENCHItem Number: 2394

3-position wrench removes oil filters from 3 1/16" to 3 3/4" (78mmto 95mm) in diameter. Designed to fit many popular makes andmodels of cars. Plastic hand grip prevents slipping.

H. UNIVERSAL 3-JAW OIL FILTER WRENCHItem Number: 3288

3-jaw design tightens around filter securely as wrench is turned.Removes all passenger car and light-duty truck spin-on-type filtersfrom 2 1/2" to 3 3/4". Use with 3/8" square drive tool.Caution: Do not use with power tools.

I. CHAIN WRENCHItem Number: 2595

Wraps around any shape item from 5/8" to 5" (16mm to 127mm) indiameter to apply torque. Turn with 1/2" square drive tools.Caution: Do not use with power tools.

F

G

H

I

FILTER WRENCHES

144

A. SQUARE DRIVE OIL FILTER WRENCHItem Number: 2029

Removes oil filters from 3 7/16" to 3 3/4" (87mm to 95mm) in diam-eter. Use in place of 190 in hard-to-reach areas. Turn filter with 3/8"square drive tools. Band will not crush filter.Caution: Do not use with power tools.

B. SQUARE DRIVE OIL FILTER WRENCHItem Number: 2380

Removes oil filters from 2 13/16" to 3 1/16" (71mm to 79mm) indiameter. Use in place of 2159 in hard-to-reach areas. Turn with 3/8"square drive tools.Caution: Do not use with power tools.

C. HEAVY-DUTY OIL FILTER WRENCH

Use to remove truck oil filters. Wrenches fit most Mack truck filters.2320 fits Ford 6.9L diesel oil and fuel filters. Designed for hightorque requirements of truck filters. Use with 1/2" square drive tools.Caution: Do not use with power tools.


2320 4 1/8" to 4 21/32" (105mm to 118mm) in diameter2321 4 21/32" to 5 5/32" (118mm to 130mm) in diameter2322 5 5/32" to 5 21/32" (130mm to 143mm) in diameter

A

B

C

FILTER WRENCHES

145

D. 3" END CAP OIL FILTER WRENCHItem Number: 2790

Specially designed end cap wrench removes and installs hard-to-reach 3" (76mm) oil filters with 15 flute end. Wrench fits variousflute designs found on AC/Delco, Fram, Wix, STP, NAPA, Sears,Gard, Montgomery Ward, VW, Motorcraft, and other filters. Use with3/8" square drive tools or 1" wrench. Durable steel wrench is zinc-plated to resist rust. Be sure fluted end of filter matches wrench.Caution: Do not use with power tools.

E. 3 3/4" END CAP OIL FILTER WRENCHItem Number: 2991

Removes and installs 3 3/4" (95mm) diameter filters. Designed foruse with 3/8" square drive tools or 1" wrench. Wrench is zinc-platedto resist rust. Be sure fluted end of filter matches wrench.Caution: Do not use with power tools.

F. NYLON STRAP OIL FILTER WRENCHItem Number: 3149

Use on oil filters up to 6" (152mm) capacity. Strong nylon belt willnot slip. Use with 1/2" square drive tools.Caution: Do not use with power tools.

G. OIL FILTER WRENCH PLIERS

Use to remove especially stubborn, “on-tight" oil filters. Unique, dual-handle, plier styling allows better leverage to bear down harder. Plastisol-coated handles provide firm grip. Forged for superior strength.Caution: Wear eye protection.


3368 2 15/16" to 3 5/8"3369 2 3/4" to 3 1/8"

D

E

F

G

SUSPENSION & DRIVE TRAIN

146

A. FRONT SHOCK ABSORBER TOOLItem Number: 2819

Removes and installs front shocks on most American cars. Also fitssome AMC rear shocks. Reaches recessed mounting bolts with 3"long, 9/16" and 15mm double-ended hex socket. Holds shock withoval-slotted socket and handle.

B. BALL JOINT SEPARATORItem Number: 2287

Separates ball joints from steering knuckles. Insert 15/16" openingbetween parts and strike with hammer. Forged to withstand hardusage. Overall length 12".Caution: Wear eye protection.

C. TIE ROD SEPARATORItem Number: 2288

Powerful tool for separating tie-rods. Insert 21/32" opening betweenparts and strike with hammer to separate. Forged to withstand hardusage. Overall length is 12".Caution: Wear safety goggles. For intended use only.

D. PITMAN ARM PULLERItem Number: 2289

Removes full size Pitman arms. Mount jaws over Pitman arm andturn center screw with wrench until tight. Strike center screw withhammer to release Pitman arm. No other tools needed. Drop forgedand heat treated steel yoke.Caution: Wear safety goggles. Do not use with power tools.

E. FLANGE TYPE AXLE PULLERItem Number: 2300

Pulls rear axle on American made cars and 1/2 ton trucks withflange type axle. Yoke fits axles with 4, 5, or 6 studs in circle from 4 1/2" to 5 1/2" in diameter. 5 lb. slide hammer makes removal easy.Slide hammer and yoke are 5/8"-18 UNF thread.

Replacement parts available:2300-71 Yoke (standard)2300-73 Hammer (5 lb.)2300-75 Yoke (compacts)

A

BC

D E

DRIVE LINE

147

F. SEAL PULLERItem Number: 3245

Use tool to remove oil and grease seals on automobiles and lighttrucks. Puller has two tip sizes for most applications. Insert tipbehind seal and use leverage to remove.Caution: Wear safety glasses. Do not use as a striking tool. For intendeduse only.

G. TRANSMISSION STOP-OFF TOOLItem Number: 2547

Eliminates the need to drain transmission fluid when making repairsor replacing drive shaft U-joints. Tool plugs transmission drive shaftopening reducing transmission fluid waste. Fits most domestic rearwheel drive cars. Patented.

H. BUSHING REMOVER AND INSTALLER SETS

Remove and insert bushings such as those in cars, trucks, buses,tractors, construction and off-road equipment. Size is stamped oneach bushing adapter. Select proper size adapter and drive bushinginto place.


31420 24-Piece Set. Sizes range from 3/8" to 1 1/4".31430 9-Piece Set. Sizes range from 1 5/16" to 1 3/4".(See price list for replacement parts.)

Caution: Wear safety goggles.

I. TRANSMISSION SEAL REMOVERSAND INSTALLERSItem Number: 2393

Removes and installs transmission shift selector shaft seals withoutdraining fluid. Screw cone shaped threads into seal and tightenremover screw to pull worn seals. Place installer over new seal andselector shaft and tap with hammer to install. Designed for use onGM transmissions.

F

G

H

I

IGNITION & ELECTRICAL

148

A. SPARK PLUG TERMINAL PLIERSItem Number: 135

Safely removes spark plug cables. Pliers prevent damage to cables.Handles and jaws are coated with heavy-duty plastic for sure grip.

B. IGNITION FILEItem Number: 2153

Files ignition points and other small objects. Thin blade with finegrid on both sides is ideal for removing carbon from points.

C. DISTRIBUTOR CLAMP WRENCHItem Number: 104

Reach around obstructions to turn distributor lock nut with this dou-ble-ended wrench. Fits 1/2" and 9/16" lock nuts. Use adapter to joinwrenches together or attach to 3/8" ratchet or extension.

Replacement part available:104-73 Coupler

D. BATTERY NUT PLIERSItem Number: 203

Easily loosen and tighten nuts on battery terminal clamps. Handles areoffset for work in cramped areas. Serrated jaws designed for sure grip.

A

B

C

D


149

E. BATTERY TERMINAL SPREADER AND CLEANERItem Number: 204

Clean and spread battery cable terminals with this pliers type tool.Sharp teeth effectively clean corrosion from clamp. Squeeze handleto spread clamp.

F. BATTERY CARRYING STRAPItem Number: 205

Carry top terminal batteries with this strong plastic strap. Endsmarked and sized to accurately fit positive and negative terminals.Strap not harmed by battery acid. Strap is 14" long.

G. BATTERY BRUSHItem Number: 201

Removes corrosion and dirt from battery terminals and cableclamps. High impact plastic case will not corrode or soften in clean-ing solutions. External brush for cable clamps. Internal brush forterminal posts.

I. BATTERY TERMINAL PULLERItem Number: 202

Use to remove battery terminal clamp without damage to battery post. Will work even on corroded spring type clamps.Loosen clamp bolt. Place jaws under each side of battery cableclamp. Tighten center screw until clamp is free.

H. BATTERY BRUSHItem Number: 206

Removes corrosion and dirt from battery terminals and cableclamps. Rugged steel case has long life. External brush for cableclamps. Internal brush for terminal posts.

E

F

G

H

I


150

A. HIGH-LOW VOLTAGE TESTERItem Number: 126

Checks 6 and 12 volt circuits for voltage and spark plug for spark.Ground clip and touch probe to point being tested. Tester bulb willlight if voltage is present. Screw probe into opposite end of handleto use as a spark tester.

Replacement parts available:126-75 GE 1449 Bulb126-76 Probe126-78 Neon Bulb

B. LOW VOLTAGE CIRCUIT TESTERItem Number: 129

Tests for voltage in 6 and 12 volt systems. Ground clip and touchprobe to point being tested. Tester bulb will light if power is present.

Replacement parts available:126-75 GE 1449 Bulb126-76 Probe129-72 Plug

C. PULLEY REMOVER AND INSTALLER SETItem Number: 2897

Removes and installs pressed-on alternator and power steeringpump pulleys on most domestic cars, light-duty trucks and someheavy-duty trucks with belt driven pulleys. Comes complete withadapters for the new GM 3.1L and the GM Quad 4’s unique stylepulleys, as well as the Ford 4.6L engine metric requirements.Reversible split jaws provide for easy access to pulley flange.Durable blow molded box for convenient storage.

D. ELECTRICAL PLIERS, STRIPPERS,AND CUTTERItem Number: 2154

Strips, cuts, and twists wire. Crimps solderless terminals. Stripswire gauges 10, 12, 14, 16, 18, and 20 AWG (.05mm, .80mm,1.0mm, 1.3mm, 1.6mm, 2.0mm, and 2.6mm). Cuts copper wire.Serrated needle-nose pliers pull, loop, and twist wire. Comfortableplastic coated grips.

E. ELECTRICAL WIRE STRIPPER AND CRIMPERItem Number: 2162

All-purpose electrical tool includes pliers nose, crimper, wire cutter,stripper, and bolt cutter. Features comfortable cushion grip handles.Pliers nose has serrated jaw to pull, loop, and twist wire. Crimperworks on 7mm and 8mm non-insulated terminals and electrical 22-20 to 20-10 insulated terminals. Wire cutters and strippers atfront of tool strip wire sizes 22-20 to 22-10. Bolt cutter cuts boltsizes 4-40, 5-40, 6-32, 8-32, 10-32, and 10-24.

A

B

C

D

E

BRAKE & WHEEL

151

F. BENDIX DRUM BRAKE SPRING TOOLItem Number: 280

Removes and installs return spring on Bendix drum brakes. Placesocket end over spring anchor and twist to remove. Hook notchedend through spring and over the post, lift to install.

G. BRAKE SHOE RETAINING SPRING TOOLItem Number: 285

Removes and installs retaining springs 11/16" to 7/8" in diameter. Specialsocket grips retaining washer. Push and turn to remove or install.

H. BRAKE SHOE RETAINING SPRINGTOOL FOR COMPACTSItem Number: 2773

Removes and installs retaining springs 5/8" to 11/16" in diameter onsmall car drum brakes. Small socket fits into tight places. Specialsocket grips retainer washer. Push and turn to remove or install.

F

G

H

BRAKE & WHEEL

152

A. UNIVERSAL BRAKE SHOE RETAININGSPRING TOOLItem Number: 2774

Double-ended tool removes and installs small and large car drumbrake retaining springs. Fits sizes 5/8" to 11/16" and 11/16" to 7/8" indiameter. Special sockets grip retaining washers. Push and turn toremove or install.

B. BRAKE SPRING PLIERSItem Number: 298

Removes and installs shoe return springs on most drum brakes.Socket end removes spring from anchor stud. Notched end installsspring on anchor. Pliers remove and install the return spring to out-side of brake shoe.

C. DRUM BRAKE ADJUSTING TOOLS

Adjusts clearance between brake drum and brake shoe. Fits throughslot in backing plate and turns star wheel.


282 Truck Drum Brake Adjusting Tool—Designed to clear axlehousing to reach slot in top of backing plate on sometrucks.

287 Straight Drum Brake Adjusting Tool—Heads fit many drumbrakes.

295 Offset Drum Brake Adjusting Tool—Heads are offset forhard-to-reach areas on small cars.

A

B

C

BRAKE & WHEEL

153

D. DISC BRAKE PISTON TOOLItem Number: 3163

Designed to rotate the parking brake activated piston back into thecaliper cylinder when replacing worn pads on vehicles equipped withfour wheel disc brakes. This tool will function on most domestic andimport vehicles.Caution: Wear eye protection. Do not use with power tools.

E. GM-FORD DISC BRAKE PISTON TOOLItem Number: 3355

Tool rotates the piston back on GM and Ford vehicles equipped with rearwheel disc brakes. Fits GM vehicles with 2-1/8" and 1-7/8" pistons andFord vehicles 1987 to current with rear disc brakes. Use in conjunctionwith a 3/8" square drive tool or the 3342 Disc Brake Adjusting Fixture.Caution: Wear eye protection. For intended use only.

F. DISC BRAKE LINING WEAR GAUGEItem Number: 2116

Measures brake lining remaining on bonded pads in fractions from 1/16"to 5/8" in 1/32" graduations. Check without removing caliper. Patented.

G. DISC BREAK PAD SPREADERItem Number: 3376

Pushes the caliper piston back on disc brakes that do not have theparking brake mechanism as part of the disc brake caliper.Caution: Wear eye protection. For intended use only.

D

E

F

G

BRAKE & WHEEL

154

B. BRAKE LINING GAUGEItem Number: 2324

Measures brake lining from 0 to 1/2" in 1/64" graduations. Placegauge over brake shoe to take reading.

C. TIRE TREAD AND BRAKE LINING GAUGEItem Number: 2326

Measures the amount of lining remaining on riveted drum shoes and disc brake pads. Measures tire tread depth up to 9/16" in graduations of 1/64".Patent #3,670,419.

D. BRAKE RESET GAUGEItem Number: 3377

Use to set the proper clearance between brake and lining drum priorto assembly. The inside calipers measure drum diameters and theoutside calipers transfer measurement to brake shoes. The knurledknob locks tool at measurement. Measures 6 1/2" to 14 1/4" indiameter.

A. BRAKE BLEEDER TANKItem Number: 2222

Fills and pressurizes standard and power brake systems. Adiaphragm separates air and fluid. Pressure relief valve preventsdamage to the tank and brake systems by preventing excess airpressure. Features a quick disconnect coupler and shut-off valve.Use shut-off valve as a source for brake fluid when topping off mas-ter cylinders with brake bleeder adapter attached. 7-quart capacity.10 1/2" hose. Adapters available for many cars. Serviceable product.Caution: For use with DOT 2, 3, 4, and 5 brake fluids only. Not for use withany other brake/hydraulic fluid.

Replacement parts available:2222-73 Pressure Gauge2222-75 Bleeder Hose2222-76 Quick Disconnect

A

B

C

D

BRAKE & WHEEL

155

E. BRAKE BLEEDER ADAPTERItem Number: 3294

Pressurizes large brake master cylinder reservoirs up to 4 1/8" x 8 3/8" found on trucks, buses and some passenger cars.Use with 2222 or 2901 brake bleeder tanks.Caution: Wear eye protection. For intended use only.

F. DUAL BRAKE BLEEDER ADAPTERItem Number: 2216

Use with 2222 or 2901 brake bleeder tanks to pressurize brake sys-tems on cars 1967 to present with master cylinder reservoirs up to 3 3/16" x 6 3/16". Ideal for large master cylinders used on disc brakemodels. Gasket prevents leakage.

Replacement parts available:2417-75 Chain2417-76 Hook Assembly

H. UNIVERSAL BRAKE BLEEDER ADAPTERItem Number: 3297

Pressurizes plastic reservoir brake systems on most late modeldomestic and import vehicles, and light duty trucks with single fillcaps. Kit includes: cover plate, clamp assembly, and two differentsize cones for complete coverage ranging from 9/16" to 2 3/4" indiameter. Use with 2222 or 2901 brake bleeder tanks.Caution: Wear eye protection. For intended use only.

I. BRAKE BLEEDER ADAPTERItem Number: 3353

Pressurizes plastic reservoir master cylinders on late model GM andChrysler vehicles. Will also work on newer “two stepped” mastercylinders and GM light trucks. Allows vertical and horizontal adjust-ments for proper fit. Includes all necessary mounting hardware.Caution: Wear eye protection. For intended use only. Protect painted surfaces.


J. DUAL BRAKE BLEEDER “T’’ ADAPTERItem Number: 3354

Use to connect two K-D 3297 Brake Bleeder Adapters together whenbleeding dual round-top reservoirs. Features quick disconnect fit-tings for fast set-up.Caution: Wear eye protection. For intended use only.

G. BRAKE BLEEDER ADAPTERItem Number: 2417

Use with 2222 or 2901 brake bleeder tanks to pressurize brake systems on cars and trucks with large dual master cylinders up to 3 1/4" x 8 3/8". Gasket prevents leakage.


E

F

G

H

I

J

BRAKE & WHEEL

156

A. TIRE PRESSURE GAUGEItem Number: 2421

Measures air pressure in tires from 20 to 120 psi (160 to 880 KPa). Easy to read scale. Includes pocket clip.

B. HAND BEARING PACKERItem Number: 2775

Self-contained bearing packer saves time and can be used anywhere.No air line or grease gun required. Packs 50 to 60 bearings withoutrefilling. Transparent, impact resistant cup allows grease level check.Use on all cage type roller and ball bearings up to 2" bore.

C. AXLE NUT SOCKETS

Use on front wheel drive axle nuts. Extra deep to fit over spindleshaft. Black impact grade material. Use with 1/2" square drive tool.


3161 GM 30mm Deep 1/2" Drive Socket3162 GM 36mm Deep 1/2" Drive Socket3270 Honda and Chrysler 32mm Deep 1/2" Drive Socket3449 GM 34mm Deep 1/2" Drive Socket

A

B

C

BRAKE & WHEEL

157

D. FORD SPINDLE NUT SOCKETItem Number: 3195

Removes Ford hi-sheer ratcheting axle nut on popular FordF250/350 series trucks. Special features include: a centering “snout”to help locate the special axle nut, and uniquely designed lugs formaximum strength. Use on rear axles of 1985 and newer two wheeldrive F250/350 Ford trucks. Use with 1/2" square drive tool.Caution: Wear safety goggles. Do not use with power tools.

E. FOUR WHEEL DRIVE SPINDLE NUTWRENCHItem Number: 2467

Removes spindle nuts on half ton four wheel drive vehicles. Uniquelydesigned lugs for maximum strength. Fits spindle nut on: Chevy, GMC1/2-Ton, Blazer, Bronco, Bronco II, Ranger, Ford 1/2-Ton and 3/4-Ton,spline type hub, IHC 1100 series, Dodge 1/2-Ton. Use with 1/2" squaredrive tool.Caution: Wear safety goggles. Do not use with power tools.

F. FOUR WHEEL DRIVE SPINDLE NUTWRENCHItem Number: 2770

Six-lug wrench removes spindle nuts on four wheel drive vehicles.Fits Ford 3/4-Ton 1978 and on, and GM 3/4-Ton and 1-Ton 1973 andon. Uniquely designed lugs for maximum strength. Use with 1/2"square drive tool.Caution: Wear safety goggles. Do not use with power tools.

G. FOUR WHEEL DRIVE SPINDLE NUTWRENCHItem Number: 3246

Removes spindle nuts on the following: Ford F250 heavy duty axles,1985 to current model, F350 heavy duty axle 4x4, 1985 to currentmodel and 1987 Chevy 30 series along with DANA 501FS and model60 monobeam axles. Uniquely designed lugs for maximum strength.Use with 1/2" square drive tool.Caution: Wear safety goggles. Do not use with power tools.

H. TRUCK SPINDLE NUT WRENCHES

Remove 6 PT and 8 PT spindle nuts on trucks. Turn with 3/4" squaredrive tool.

Item ItemNo. Description No. Description

2430 2 3/32" Hex 2444 3" Hex2431 2 1/4" Hex 2445 3" Octagon2432 2 3/8" Hex 2448 3 1/4" Hex2434 2 3/8" Rounded Hex (Dana) 2449 3 1/4" Octagon2435 2 1/2" Hex 2451 3 1/2" Hex2436 2 9/16" Rounded Hex (Dana) 2453 3 3/4" Octagon2437 2 9/16" Hex 2455 3 13/16" Octagon2438 2 9/16" Octagon 2456 3 7/8" Hex2439 2 5/8" Hex 2457 3 7/8" Octagon2440 2 3/4" Hex 2458 4" Hex2441 2 3/4" Octagon 2459 4 1/8" Hex2442 2 7/8" HexCaution: Wear safety glasses. Do not use with power tools.

D

EF

G

H

COOLING & EXHAUST

158

A. CV JOINT BOOT CLAMP PLIERSItem Number: 424

Hose clamp installer for easy installation of Perma-Quick type hoseclamps on fuel filters, water pumps, other cooling system hoses,and CV joint boot clamps. Will work on late model GM “Super Boot”.Jaws crimp the clamp.

C. HOSE CLAMP PLIERSItem Number: 429

Pliers latch in position to securely hold Corbin clamp when expand-ed. Makes removing and installing ring type clamps easy. Slottedjaws swivel to grip at any angle. Clamps not included.

D. HOSE PINCH-OFF PLIERSItem Number: 145

Eliminates need to drain system when servicing cooling system.Pliers squeeze hoses shut. Jaws swivel for parallel clamping.Automatic locking ratchet. Can be used to pinch off some emissionsystem hoses.Note: Do not use on wire reinforced hose.

F. EXHAUST AND TAILPIPE CUTTERItem Number: 2031

Cuts pipes 3/4" to 3" (19mm to 76mm) in diameter. 15 blades effec-tively cut pipe so only 1 turn is needed for complete cut. Works inhard-to-reach areas. Cushion grips for comfort. Keep well oiled. Willnot cut double-wall pipe. Patented. Serviceable product.Caution: Wear safety goggles.

Replacement part available:2031-82 Cutter Chain Assembly

A

B

C

D

E

F

B. FLAT BAND HOSE CLAMP PLIERSItem Number: 3252

Pliers remove and install flat band clamps that are used on varioushose assemblies found on domestic and import cars and light dutytrucks.Caution: Wear safety goggles.

E. QUICK SAWItem Number: 21046

Saw features a sturdy, screwdriver-type handle for a sure grip.Comes with 2 reciprocating saw blades; design allows for the use ofany standard reciprocating saw blade. Packaged in a durable vinylpouch.Caution: Wear safety goggles.

SPECIALTY

159

G. TELESCOPING MIRRORItem Number: 2109

Inspects hidden areas. 2 1/4" diameter mirror swivels to almost anyposition. Closed length 10", extends to 14". Comfortable vinyl grip.

H. 1 1/4" ROUND MAGNIFYING MIRROR WITHPOCKET CLIP AND TELESCOPING HANDLEItem Number: 2840

Perfect for inspecting hidden areas. The mirror swivels to almostany position and telescopes up to 17" in overall length.

I. TELESCOPING MAGNETIC RETRIEVINGTOOLItem Number: 2281

Extends from 16 3/4" to 26 3/4" to pick up hard-to-reach ferrousmetal parts and tools. Rotate magnet to any position. Comfortablevinyl grip.

J. FLEXIBLE RETRIEVING TOOLSItem Number: 2391

Retrieve small objects from hard-to-reach places. Push button toopen claws. Release to grab. 23" long flexible shaft.

G

H

I

J

SPECIALTY

160

B. HOOK AND PICK SETItem Number: 3121

5-piece Hook and Pick Set includes 5" aluminum handle, knurled for asure grip. Set also includes four heat-treated, high-carbon steel picks:“O”-ring pick, 90 degree, straight and hook. Picks are used to pull“O”-rings, seals, cotter pins, and brushes more quickly and easily.

C. GASKET SCRAPERItem Number: 485

Scrapes surfaces clean for installing new gaskets. Use beforeinstalling water pump, thermostat, cylinder head, crankcase and tim-ing chain cover gaskets. Forged steel for rugged service. Comfortgrip handle. Overall length 10 1/2", 1" blade.

D. ALL-PURPOSE SCRAPER ANDSTICKER REMOVERItem Number: 2106

Removes inspection stickers, dealer price labels, and paint fromglass. Locks into three operating positions to reach hard-to-get-atslanting windshields. Cutting edge folds into handle for safe storage.Uses single edge razor blades.Caution: Not for use on plastic coated windshields.

Replacement parts available:2106-75 Replacement Blades (pkg. of 5)

A. 3 PC. HEAVY DUTY HOOK AND PICKSETItem Number: 3476

This 3 pc. set includes NEW KD part numbers #3470, #3474 and#3475. The tools included are ideal for use anywhere a hook/removal tool, spring removal tool or a sharp punch is required. Allthree tools feature corrosion-resistant zinc plating and high-visibilityhandles.Caution: Wear safety goggles.

Replacement parts available:3470 Heavy-Duty Hook and Cotter Pin Puller3474 Heavy-Duty Spring Hook Tool3475 Heavy-Duty Scratch Awl

E. TUBING BENDERItem Number: 2189

Bends 3/16", 1/4", 5/16", and 3/8" copper and steel tubing. Makestight bends without collapsing tubing. Roller adapters included foreach tubing size. Place tubing between adapter and studs. Squeezehandles to bend.

F. 4" BRASS POCKET SLIDE CALIPERItem Number: 2527

Checks inside and outside measurements in 1/32" and 1mm incre-ments. Graduations permanently etched on surface.

B

A

C

D

E

F

SPECIALTY

161

G. DOUBLE FLARING TOOL SETItem Number: 2199

Precisely flares tubing to .040 wall thickness to SAE 45° flares. Thehardened bar assembly clamps five tubing sizes: 3/16", 1/4", 5/16",3/8", and 1/2". Includes corresponding adapters for forming doubleflares. Packaged in a sturdy case with full instructions. Not for useon stainless steel tubing.

Replacement parts available:2190-78 Double Flare Nut Adapter Kit, 4 pc.

Includes 3/16", 1/4", 5/16", 3/8".2199-85 1/2" Flaring Tool Adapter

H. MINI TUBING CUTTERItem Number: 2107

Cuts tubing from 1/8" to 5/8" in diameter. Two rollers provide burr-free cut. Cuts thin wall steel, plastic, copper, and brass tubing. Smallsize fits into tight areas.

I. UNIVERSAL NUT CRACKERItem Number: 715

Splits most stubborn nuts 7/16" (11mm) through 3/4" (19mm)across the flats. Works in channels not accessible to other tools.Parallel action of pusher cracks nuts without damaging bolt threads.Chisel rotates 360° to line up parallel to bolt. Tighten screw until nutsplits. Rugged drop forged frame. 6 3/4" long. Do not use on heattreated nuts. Serviceable product.Caution: Wear safety goggles.

Replacement parts available:715-72 Screw715-73 Steel Ball715-74 Chisel715-75 Plunger

J. STUD EXTRACTORItem Number: 1708

Removes 1/4" (6mm) to 3/4" (19mm) studs. Cam wheel grips within9/32" of flat surface to hold stud. Drive socket will not bind.

G

H

I

J

SPECIALTY

162

A. SAE IMPACT DRIVER SETItem Number: 1140

Frees frozen bolts and screws. Twist tool in direction of rotation andhold while striking with hammer to loosen screws and bolts.Reverse action to tighten bolts. Standard 3/8" square drive. Four bitsincluded with set: No. 2 Phillips, No. 3 Phillips, 5/16" Slotted and9/32" Slotted. Includes 3/8" square drive to 5/16" hex adapter forbits. Replacement bits available individually. Serviceableproduct.Replacement bits available:412402 - No. 2 Phillips Bit 412403 - No. 3 Phillips Bit412406 - 9/32" Slotted Bit 412410 - 5/16" Slotted Bit Caution: Wear safety goggles.

B. SLOTTED SCREW STARTERItem Number: 2282

Holds screw securely for hard-to-reach areas. Twist bit to holdscrew for easy starting. Strong magnet on opposite end picks updropped parts. Includes pocket clip. 5 5/8" long.

C. PHILLIPS SCREW STARTERItem Number: 2283

Twist bit to firmly hold Phillips screws for easy starting. Reacheshard-to-get-at areas. Strong magnet on opposite end retrievesdropped parts. Includes pocket clip. Length 5 5/8".

D. SCREW EXTRACTOR KITItem Number: 720

Removes screws, broken studs, set screws, pipe and Alemite fit-tings. Drill hole in screw. Place extractor into hole. Tap lightly withhammer. Turn counterclockwise with tap wrench to remove screw.Features undercut flutes for more positive grip.Caution: Wear safety goggles.

Includes the following screw extractors (available individually):

Min.Extractor Screw Drill Depth PipeNo. Size Size Hole Size

1109 1/4", 5/16" 1/8" 3/8" -1110 3/8" 3/16" 1/2" -1111 7/16" 15/64" 1/2" 1/8"1112 1/2", 9/16" 5/16" 1/2" 1/4"1113 5/8" 3/8" 5/8" 3/8"

E. SPIRAL SCREW EXTRACTOR KITItem Number: 2419

Removes screws, broken studs, set screws, pipe and Alemite fit-tings. Drill hole into screw. Place extractor in hole. Tap lightly withhammer. Turn counterclockwise with tap wrench to remove. Spiralblades grip screw. Extractors fit the following:

Extractor No. Screw, Bolt or Stud Size Drill Size

2419-71 No. 12 to 5/16" 7/64"2419-72 5/16" to 7/16" 5/32"2419-73 7/16" to 9/16" 1/4"2419-74 9/16" to 3/4" 17/64"

A

BC

D

E

FEELER GAUGES

163

F. FEELER GAUGEItem Number: 162

Measures clearances .002" to .025" (.051mm to .635mm). Includes2 1/2" rule. 15 blade sizes:

Inches mm Inches mm Inches mm

.002 .051 .008 .203 .016 .406

.003 .076 .011 .279 .018 .457

.004 .102 .012 .305 .020 .508

.005 .127 .013 .330 .022 .599

.006 .152 .014 .356 .025 .635

G. DELUXE FEELER GAUGEItem Number: 161

Measures clearances from .0015" to .035" (.038mm to .889mm).Also includes one .010" brass blade for use with electronic ignitions.32 blade sizes.


.0015 .038 .010 Brass .254 .021 .533

.002 .051 .011 .279 .022 .559

.0025 .063 .012 .305 .023 .584

.003 .076 .013 .330 .024 .610

.004 .102 .014 .356 .025 .635

.005 .127 .015 .381 .026 .660

.006 .152 .016 .406 .028 .711

.007 .178 .017 .432 .030 .762

.008 .203 .018 .457 .032 .813

.009 .229 .019 .483 .035 .889

.010 .254 .020 .508

H. MINI FEELER GAUGEItem Number: 2062

Measures clearances from .010" to .035" (.254mm to .889mm).Gauge is 1/4" wide x 1 3/4" long. 16 blade sizes:


.010 .254 .019 .483 .028 .711

.012 .305 .020 .508 030 .762

.015 .381 .022 .559 .032 .813

.016 .406 .024 .610 .035 .889

.017 .432 .025 .635

.018 .457 .026 .660

I. METRIC FEELER GAUGEItem Number: 2274

Measures clearances .04mm to 1.00mm. 25 blades. Blade sizes:.04, .05, .06, .07, .08, .09, .10, .15, .20, .25, .30, .35, .40, .45, .50, .55, .60,.65, .70, .75, .80, .85, .90, .95, 1.00

J. VALVE TAPPET FEELER GAUGEItem Number: 163

Measures clearance to .001". 11 blade sizes:


.008 .203 .014 .356 .019 .483

.010 .254 .015 .381 .020 .508

.012 .305 .016 .406 .026 .660

.013 .330 .018 .457

F

G

H

I

J

FEELER GAUGES

164

A. NON-MAGNETIC FEELER GAUGEItem Number: 2223

Measures clearance in electronic ignition systems where non-mag-netic blades are required. Hard brass will not become magnetized.Six blade sizes:


.006 .152 .010 .254 .014 .356

.008 .203 .012 .305 .016 .406

B. GO-NO-GO FEELER GAUGEItem Number: 2424

Check clearance measurements with a .002" range. Stepped bladesquickly indicate if clearance falls within specified range. 22 etched bladescover complete range of sizes from .004" to .027" (.10mm to .69mm).

C. SPARK PLUG GAP AND FEELERGAUGE SETItem Number: 164

Measures spark plug and other ignition clearances from .010" to.045" (.254mm to 1.143mm). Six wire gauges check spark plug gap.Twelve straight blades check other clearances. Double-ended elec-trode tool for easy adjustments.

Wire gauge sizes:


.025 .635 .034 .864 .040 1.016

.030 .762 .035 .889 .045 1.143

12 blade sizes:


.010 .254 .017 .432 .022 .559

.012 .305 .018 .457 .024 .610

.015 .381 .019 .483 .025 .635

.016 .406 .020 .508 .026 .660

D. SPARK PLUG GAP WIRE GAUGEItem Number: 166

Measures spark plug electrode gap from .025" to .045" (.64mm to1.14mm). Includes two electrode adjusting tools.

Wire gauge sizes:


.025 .64 .034 .86 .040 1.02

.030 .76 .035 .89 .045 1.14

E. SPARK PLUG GAP GAUGEItem Number: 2327

Measures spark plug electrode gap on wide gap plugs from .040" to.080" (1.02mm to 2.03mm). Includes two electrode adjusting tools.

Gauge sizes:


.040 1.02 .045 1.14 .060 1.52

.044 1.12 .050 1.27 .080 2.03

A

B

C

D

E

PULLERS

165

F. SPLIT BEARING ATTACHMENTS

Designed for the removal of bearings, thin-faced gears and cone-shaped gears. Beveled edge allows insertion behind pulleys, gears,or bearings where space limits use of a standard puller jaw. Use togrip part to be pulled. Then pull with gear puller.

Item No. Min. Reach Max. Reach

2263 0 2 1/4"2264 0 4 1/4"2265 1/2" 8 5/8"

(see price list for replacement parts)

G. SLIDE HAMMER PULLER SETItem Number: 2256

Slide Hammer Puller Set for outside and inside pulling of gears,bearings, pinions, grease retainers, oil seals, bearing out races, andmany other jobs. Use as two-jaw or three-jaw puller. Reversing thecone and jaws adjusts the tool for inside pulling. Comes with a 2 1/2pound hammer. Slide hammer has 5/8"-18 UNF thread.

Outside Inside

Capacity with 2-Jaws 1" to 4 1/2" 1 1/4" to 3 3/8"Capacity with 3 Jaws 1 1/2" to 4 1/2" 1 5/16" to 4 3/4"

Replacement parts available:2256-72 Puller Arm2256-73 Two Way Puller Head2256-74 Three Way Puller Head2256-75 Adjusting Cone2256-76 Nut and Screw Package2300-73 Hammer (5 lb.)

H. HEAVY DUTY UNIVERSAL WHEELHUB PULLERItem Number: 2251

Use to pull wheel hubs where bolt circle does not exceed 7 1/2". Quickly adjusts to fit any hub, regardless of the number ofwheel studs.

Replacement part available:2251-74 Striking Wrench

I. COMBINATION 2–AND 3–JAWADJUSTABLE GEAR PULLERS

Heavy duty two or three-jaw adjustable pullers designed for yourtoughest pulling jobs. Uses special 2-3 way yoke. Jaws reverse forinside and outside pulling. The triple-jaw design provides a positivethree-point grip on the part to be pulled. The three-position jawsprovide added versatility and extended reach. All parts are heat treat-ed for durability.

CenterItem Jaw Max. Max. Capacity ScrewNo. Position Spread Reach Tons Size

2260 3 17" 15" 13x 13/16" x 12"2297 2 7" 5 1/2" 5 5/8" x 6 11/16"


F

G

H

I

PULLERS

166

A. COMBINATION 2– AND 3 – JAWREVERSIBLE GEAR PULLER

Jaws reverse for inside and outside pulling and also reverse end toend to use either style foot. Large spread and reach accommodateflywheels, pulleys, and gears. 3-point grip applies a parallel pull.


2295 1 6" 3 1/2" 4 5/8" x 6 11/16"


B. 2– JAW REVERSIBLE GEAR PULLERS



2294 1 6" 3 1/2" 5 5/8" x 6 11/16"2298 1 8" 5 1/2" 5 11/16" x 9 1/8"


D. 3–JAW REVERSIBLE GEAR PULLER



2299 1 8" 5 1/2" 5 11/16" x 9 1/8"


C. 2–JAW ADJUSTABLE GEAR PULLER

Rugged, heavy-duty pullers designed for the most difficult pullingapplications. The two position jaws provide for added versatilityalong with extended reach capabilities. Jaws reverse for inside andoutside pulling.


2292 2 4" 3 1/2" 3 3/8" x 4 3/4"2296 2 7" 5 1/2" 5 5/8" x 6 11/16"


A

B

C

D

SNAP RINGS, PLIERS, TOOLS

167

E. INTERNAL SNAP RING PLIERS SETItem Number: 445

Removes and installs internal snap rings. Fits internal snap rings1/4" to 1 1/2" in diameter. Includes five pair of interchangeablepoints. Point sizes: .039" diameter, 15° angle; .048" diameter, 15°angle; .074" diameter, 15° angle; .039" diameter, 45° angle; .047"diameter, 90° angle. Use 447 and 448 point sets with these pliers.Use 5/64" hex key when replacing points.Caution: Wear Safety goggles.

Replacement part available:1445-75 Clamps and Screws

F. EXTERNAL SNAP RING PLIERS SETItem Number: 446

Removes and installs external snap rings. Fits external snap rings1/8" to 1 1/2" in diameter. Includes five pair of interchangeablepoints. Point sizes: .039" diameter, 15° angle; .048" diameter, 15°angle; .074" diameter, 15° angle, .039" diameter, 45° angle; .047"diameter, 90° angle. Use 447 and 448 point sets with these pliers.Use 5/64" hex key when replacing points.Caution: Wear safety goggles.


G. HEAVY DUTY INTERNAL SNAPRING PLIERS SETItem Number: 455

Removes and installs heavy duty internal snap rings. Fits internalsnap ring from 2 7/16" to 4 1/2" in diameter. Includes three pairs ofinterchangeable points. Point sizes: .108" diameter, 15° angle; .108"diameter, 45° angle; .123" diameter, 45° angle. Use 457 Heavy Dutypoint set with these pliers. Use a 3/32" hex key when replacingpoints.Caution: Wear safety goggles.


H. HEAVY DUTY EXTERNAL SNAPRING PLIERS SETItem Number: 456

Removes and installs heavy duty external snap rings. Fits externalsnap rings from 1 1/2" to 4 1/2" in diameter. Includes three pairs ofinterchangeable points. Point sizes: .108" diameter, 15° angle; .108"diameter, 45° angle; .123" diameter, 45° angle. Use 457 Heavy Dutypoint set with these pliers. Use a 3/32" hex key when replacingpoints.Caution: Wear safety goggles.


E

F

G

H


168

B. COMBINATION SNAP RING PLIERSItem Number: 2011

Removes and installs internal and external snap rings. Includes five pairsof interchangeable points. Point sizes: .039" diameter, 15° angle; .047"diameter, 15° angle; .074" diameter, 15° angle; .039" diameter, 45° angle;.047" diameter, 90° angle. Points lock securely into jaws. Screw typedesign maintains jaw position during use. Fits internal snap rings 1/4" to1 1/2" in diameter. Fits external snap rings 1/8" to 1 1/2" in diameter.Caution: Wear safety goggles.


A. HEAVY DUTY COMBINATION SNAPRING PLIERSItem Number: 2012

Removes and installs heavy duty internal and external snap rings.Includes three pairs of interchangeable points. Point sizes: .108" diame-ter, 15° angle; .108" diameter, 45° angle; .123" diameter, 45° angle.Points lock securely into jaws. Screw type design maintains jaw positionduring use. Fits internal snap rings 2 7/16" to 4 1/2" in diameter. Fitsexternal snap rings 1 1/2" to 4 1/2" in diameter.Caution: Wear safety goggles.


C. SMALL AND LARGE CONVERTIBLE INTERNAL AND EXTERNAL SNAP RINGPLIERS (small pliers shown)

Use on small internal and external snap rings where space is limited.Includes five pair of color-coded tips in sizes .023 straight, .036, .047straight and 90°. Use on external ring sizes 1/8" through 1" (3.2mm–25.4mm) Use on internal ring sizes 1/4" through 1" (6.4mm –25.4mm).Caution: Wear safety goggles.Item No. Description Item No. Description

3150 Small 3151 LargeReplacement parts available:3150-77 Replacement Point Kit-2 each of 5 different sizes.

2 pc. .023 Straight; 2 pc. .047 Straight; 2 pc. .047 90 degree;2 pc. .036 Straight; 2 pc. .036 90 degree

3151-77 Replacement Point Kit-2 each of 5 different sizes.2 pc. .070 Straight; 2 pc. .047 Straight; 2 pc. .047 90 degree;2 pc. .036 Straight; 2 pc. .036 90 degree

D. EXTRA LARGE CONVERTIBLE INTERNALEXTERNAL SNAP RING PLIERSItem Number: 3152

For use on large internal and external snap rings including automatictransmissions. Features “ratchet lock” to hold snap ring in desired posi-tion. Includes six pair of color-coded alloy steel tips in sizes .090, .108,.120 bent 15 degrees and 90 degrees. Use on external ring sizes 1 1/2through 4" (38.1mm through 101.6mm) Use on internal ring sizes 1 13/16" through 4" (46mm through 101.6mm).Caution: Wear safety goggles.

Replacement part available:3152-77 Replacement Point Kit-2 ea. of 6 different sizes.

2 pc. .090 15 degree; 2 pc. .090 90 degree; 2 pc. .108 15degree; 2 pc. .108 90 degree; 2 pc. .120 15 degree; 2 pc. .12090 degree

A

B

C

D


169

F. LOCK RING PLIERSItem Number: 2534

Removes and installs snap rings without holes used on brakes,transmissions, pedal shafts, and clutch shafts. Scored jaws holdrings securely.

G. INTERCHANGEABLE POINTS SET

Includes nine pair of interchangeable points and two retainingscrews for snap ring pliers 2011, 445, 446, 2395 and 2396. Use5/64" hex key when replacing points.Caution: Wear Safety Goggles.

Item No. 447 Description Item No. 448 Description

.039" 15° .039" 15°

.047" 15° .047" 15°

.074" 15° .074" 15°

.039" 45° .039" 45°

.047" 90° .047" 45°.074" 45°.039" 90°.047" 90°.074" 90°

H. EMERGENCY SNAP RING ASSORTMENTItem Number: 985

Includes the 52 most popular internal and external snap rings foremergency repairs on autos, industrial equipment, and home appli-ances. An actual size silhouette chart is packed with each set foreasy identification of snap rings.

E. SNAP RING ASSORTMENTItem Number: 2550

Includes a starter assortment of 107 different size internal and exter-nal snap rings in a molded plastic case. Actual size silhouette chartin lid makes identification easy. Overall case size is 18" x 13" x 2 1/2". Ideal assortment to keep on hand. Refills available.Caution: Wear safety goggles.

E

F

G

H

BRUSHES

170

A. STAINLESS STEEL BRUSHItem Number: 2309*

Brush has hand-tied stainless steel tufts for cleaning corrosion fromparts without scratching. Brush size: 3/8" x 1 3/8". Handle length: 7".Caution: Wear safety goggles.*Made in Mexico

B. PARTS CLEANING BRUSHItem Number: 242

Use to remove grease and dirt from equipment parts. Strong handlewith durable polypropylene bristles will hold up under repeated usein cleaning solvents.Caution: Wear safety goggles.

C. CURVED HANDLE WIRE SCRATCH BRUSHItem Number: 2310*

Cleans carbon, dirt and paint from metal and other surfaces. Overalllength is approximately 14". Bristle area is 3 x 19 rows, 1 1/8" trimand 6" long. Wooden handle.Caution: Wear safety goggles.*Made in Mexico

D. SHOE HANDLE WIRE SCRATCH BRUSHItem Number: 2311*

Cleans dirt, carbon and rust from metal and other surfaces. Bristlesare densely packed over 5 1/4". Overall length approximately 10".Bristle area is 4 x 16 rows, 1 1/8" trim. Hardwood handle.Caution: Wear safety goggles.*Made in Mexico

E. 1" KNOT-TYPE WIRE END BRUSHItem Number: 2312

Removes rust, carbon and paint from metal and other surfaces.Designed for heavy duty use. Industrial tempered straight twistedwire, .020". Use with electric drills, pneumatic tools or flexible shaftequipment.Caution: Wear safety goggles.

MaxFace Shank Safe FreeDiameter Diameter Speed

1" 1/4" 20,000 RPM

A

B

C

D

E

BRUSHES

171

F. 1" CRIMPED WIRE END BRUSHItem Number:. 2313

Removes dirt, rust, and paint from metal and other surfaces.Designed for general purpose cleaning. .020 industrial crimped wire.Use in electric drill, pneumatic tools, or flexible shaft equipment.Caution: Wear safety goggles.


1" 1/4" 20,000 RPM

G. 2 1/2" WIRE CUP BRUSHItem Number: 2314

Removes light scale, rust and paint from surfaces. Designed forlight duty use. .014 high carbon steel wire. Use in electric drill andflexible shaft equipment.Caution: Wear safety goggles.


2 1/2" 1/4" 5,000 RPM

H. SUPER HEAVY-DUTY CUP BRUSHItem Number: 1745

Use with power tool to remove weld flash, rust, scale and otherimperfections. Great rigidity is developed from the exclusive methodof tufting - each tuft of wire supports the others and thus reducesvibration. Threaded arbor hole fits directly on spindle.Caution: Wear safety goggles.

MaxFace Safe FreeDiameter Face Width Arbor Hole Speed

6" 1 3/4" 5/8-11 UNC 6,000 RPM

F

G

H

BRUSHES

172

A. WIRE WHEEL ADAPTERS

Replacement adapters for adjusting 2" inside diameter wire wheelsto fit specific arbor size.

Item No. Arbor Size

1733 1/2"1734 3/4"1735 5/8"

B. HEAVY-DUTY WIRE WHEELS

Use with portable tools and bench grinders to remove carbon, paint,rust, and scale. Also for roughing up tires and tubes prior to vulcan-izing. Made from tough, wear-resistant wire, encased between twosteel plates for an even brushing surface. Adapter furnished witheach brush for arbor hole sizes listed. Additional adapters available.Caution: Wear safety goggles.

MaxFace Safe Free

Item No. Diameter Face Width Arbor Hole Speed

1741 6" 1 1/8" 1/2" 6,000 RPM1742 6" 7/16" 1/2, 5/8" 3,750 RPM1743 7" 1 1/2" 5/8" 6,000 RPM1744 8" 1 1/2" 5/8" 4,500 RPM

C. SUPER HEAVY-DUTY KNOT TYPEWIRE WHEELS

Use with stationary or portable equipment for severe cleaning orbuffing. Removes welding flash from bodies; cleans surface rough-ness, rust, scale, and performs other heavy-duty cleaning opera-tions. Constructed with strong, cable-like design. Wires support oneanother.Caution: Wear safety goggles.

MaxFace Safe Free

Item No. Diameter Face Width Arbor Hole Speed

1737 6" 1" 1/2", 5/8" 9,000 RPM1738 8" 1" 5/8" 8,500 RPM

D. SUPER BRUSHItem Number: 3134

Use with electric drill for removing rust, dirt and other foreign mate-rial on automotive rims. Can also be used for light scale and rustremoval during body repair work. Unique style brush is moreaggressive and will not give or fray like typical brushes. Super Brushwill last up to four times longer. Provides the stiffness to cleanunwanted material from tight areas and creases where normalbrushes will mushroom and prevent proper cleaning. Brush face is3" in diameter and is 1/4" thick, with a 1/4" shank.Caution: Wear safety goggles.

A

B

C

D

AllenItemNumber Page






173

PRODUCT INDEX

104 148104-73 148126 150126-75 150126-76 150126-78 150129 150129-72 150135 148145 158161 163162 163163 163164 164166 164190 142191 142201 149202 149203 148204 149205 149206 149242 170280 151282 152285 151287 152295 152298 152424 158429 158445 167446 167447 169448 169455 167456 167485 160715 161715-72 161715-73 161715-74 161715-75 161720 162730 138835 137901 139985 169

1140 1621445-75 1671455-75 1671708 1611733 1721734 1721735 1721737 1721738 1721739 1721741 1721742 1721743 1721744 1721745 1712010 1422011 1682012 1682029 1442031 1582031-82 1582062 1632078 1392079 1402079-82 1402106 1602106-75 1602107 1612109 1592114 1402116 1532125 1382126 1382127 1382153 1482154 1502159 1422162 150

2187 1432189 1602199 1612190-78 1612199-85 1612216 1552222 1542222-73 1542222-75 1542222-76 1542223 1642251 1652251-74 1652256 1652256-72 1652256-73 1652256-74 1652256-75 1652256-76 1652259 1652263 1652264 1652265 1652274 1632281 1592282 1622283 1622287 1462288 1462289 1462292 1662294 1662295 1662296 1662297 1662298 1662299 1662300 1462300-71 1462300-73 1462300-75 1462309 1702310 1702311 1702312 1702313 1712314 1712320 1442321 1442322 1442324 1542326 1542327 1642380 1442391 1592393 1572394 1432417 1552417-75 1552417-76 1552419 1622419-71 1622419-72 1622419-73 1622419-74 1622421 1562424 1642428 1372428-75 1372430 1572431 1572432 1572434 1572435 1572436 1572437 1572438 1572439 1572440 1572441 1572442 1572444 1572445 1572448 1572449 1572451 1572453 157

2455 1572456 1572457 1572458 1572459 1572467 1572521 1412527 1602534 1692539 1412547 1472550 1692561 1342595 1432770 1572773 1512774 1522775 1562776 1412790 1452819 1462833 1382840 1592897 1502951 1332952 1332953 1332954 1332955 1342956 1342957 1342991 1452992 1403082 1423083 1423087 1393121 1603134 1723149 1453150 1683150-77 1683151 1683151-77 1683152 1683152-77 1683161 1563162 1563163 1533195 1573245 1473246 1573452 1583259 1383261 1333262 1333263 1333264 1333265 1333266 1333270 1563288 1433294 1553297 1553321 1413324 1423336 1343353 1553354 1553355 1533368 1453369 1453376 1533377 1543416 1343417 1343418 1343449 1563470 1603470 1603471 1373472 1373473 1373474 1603475 1603476 1603490 1413498 133

10021 2710022 2710023 2710024 2710025 2710026 2710027 2710028 2710029 2710030 2710052 2810053 2810054 2810055 2810056 2810057 2810058 2810059 2810060 2810102 2710104 2710106 2710107 2710108 2710109 2710110 2710111 2710112 2710113 2710152 2810154 2810156 2810157 2810158 2810159 2810160 2810161 2810162 2810163 2810164 2810202 2710203 2710204 2710205 2710206 2710207 2710208 2710209 2710210 2710900 2510901 2510902 2610904 2510905 2610906 2510907 2510908 2510909 2510910 2610911 2610912 2610913 2610914 2610915 2610916 2510920 2510925 2610930 2610940 2611004 3511006 3511008 3511009 3511010 3511011 3511012 3511013 3511014 3511015 3511058 3611059 3611060 3611061 3611062 3611063 3611064 3611065 36

11066 3611159 3611160 3611161 3611162 3611163 3611164 3611165 3611166 3611167 3611168 3611169 3611206 3611208 3611209 3611210 3611211 3611212 3611213 3611214 3611215 3611216 3611258 3711259 3711260 3711261 3711262 3711263 3711264 3711265 3711266 3711309 3611310 3611311 3611312 3611313 3611314 3611315 3611316 3611317 3611318 3611319 3611321 3611359 3711360 3711361 3711362 3711363 3711364 3711365 3711366 3711367 3711368 3711369 3711412 3811415 3811508 3711509 3711510 3711511 3711512 3711513 3711514 3711560 3711561 3711562 3711563 3711564 3711565 3711566 3711567 3711568 3711569 3711900 3211901 3211901B 3211902 3311904 3211905 3311905B 3411906 3211907 3211908 3211909 3411910 3311910B 3411911 34

11912 3311912B 3411913 3211914 3411915 3311916 3311917 3311918 3311919 3311920 3311920B 3311921 3411922 3211923 3211925 3411926 3311927 3411930 3412028 5512029 5512030 5512031 5512032 5512033 5512034 5512035 5512036 5512037 5512038 5512039 5512040 5512042 5512060 5612061 5612062 5612063 5612064 5612065 5612066 5612067 5612068 5612069 5612070 5612106 3512107 3512108 3512109 3512110 3512111 3512112 3512113 3512114 3512115 3512116 3512117 3512118 3512119 3512120 3512121 3512122 3512208 5612209 5612210 5612211 5612212 5612213 5612214 5612215 5612216 5612217 5612218 5612219 5612220 5612222 5612226 5612260 5712261 5712262 5712263 5712264 5712265 5712266 5712267 5712268 5712269 5712270 5712309 56

174

PRODUCT INDEX

12310 5612311 5612312 5612313 5612314 5612315 5612316 5612317 5612318 5612319 5612320 5612321 5612322 5612323 5612324 5612325 5612326 5612327 5612328 5612330 5612332 5612336 5612412 5712415 5712800 5212801 5312801B 5312802 5312803 5412804 5312805 5412805B 5412806 5312807 5212808 5312809 5312810 5412810B 5412811 5312812 5412812B 5412813 5312814 5412820 5412820B 5412821 5412825 5412827 5512828 5512830 5513202 6513203 6513204 6513205 6513206 6513207 6513208 6513209 6513210 6513211 6513212 6513213 6513214 6513215 6513216 6513217 6513218 6513220 6513222 6513223 6513224 6513240 6513900 6313900B 6313901 6313910 6413912 6413914 6413920 6413922 6413927 6413928 6413929 6414225 6914226 6914228 6914231 69

14232 6914234 6914236 6914237 6914238 6914240 6914242 6914243 6914244 6914246 6914249 6914250 6914251 6914800 6714806 6714812 6814817 6814820 6814827 6819001 3019007 3119009 3019011 2919013 3119014 3119015 2919016 3019017 3119018 3119019 3019020 3019111 4519113 4819114 4819115 5019116 4519117 4719118 4719119 4919120 4919121 5019122 5019123 4619125 4319126 4919127 5019128 4619129 4919130 5019131 4619132 4719134 4819135 4819136 4619137 4719138 4219139 4519140 4819142 4419143 4419144 4119209 5919210 5919211 5919212 6019213 6019214 6019215 6119216 6119217 5919218 6019219 6119220 6019221 6019222 4019230 4519231 1919233 2919300 6619301 6719400 7019500 5219501 5219502 5219503 6219504 6219505 63

19506 6219507 6219508 6319509 6719510 6719511 5219603 1319607 2119608 2119609 2119610 2119611 2119612 2119613 1819614 1819615 1719616 1719617 1819618 1819619 1719620 1719621 1619622 1619623 1619624 1619625 1519626 1519627 1519628 1519629 1419630 1419631 1419632 1419633 1219634 1219635 1119636 1119637 2019638 2019639 1919640 1919641 2019642 2019700 12419701 12819702 12819705 12519710 12619714 12719715 12619716 12719718 12619720 12719741 13019742 13019743 12919744 12919745 13019746 13019747 12919748 13019750 12319751 12319752 12319753 12319754 12319755 12319756 12319757 12319758 12319759 12319760 12319761 12319763 12319770 12519800 2219803 2019804 2219805 2220204 7320204B 7420206 7320206B 7420208 7320208B 7420209 7320209B 74

20210 7320210B 7420211 7320211B 7420212 7320212B 7420213 7320213B 7420214 7320214B 7420215 7320215B 7420216 7320216B 7420217 7320217B 7420218 7320218B 7420219 7320219B 7420220 7320220B 7420222 7320222B 7420223 7320223B 7420224 7320224B 7420225 7320225B 7420226 7320226B 7420228 7320229 7320230 7320231 7320232 7320234 7320235 7320236 7320237 7320238 7320239 7320240 7320307 7320307B 7420308 7320308B 7420309 7320309B 7420310 7320310B 7420311 7320311B 7420312 7320312B 7420313 7320313B 7420314 7320314B 7420315 7320315B 7420316 7320316B 7420317 7320317B 7420318 7320318B 7420319 7320319B 7420320 7320320B 7420321 7320321B 7420322 7320322B 7420323 7320323B 7420324 7320324B 7420325 7320325B 7420326 7320326B 7420327 7320327B 7420328 73

20328B 7420329 7320329B 7420330 7320330B 7420332 7320332B 7420413 7520414 7520415 7520416 7520417 7520418 7520419 7520420 7520421 7520422 7520423 7520424 7520425 7520426 7520427 7520428 7520429 7520430 7520431 7520432 7520433 7520434 7520435 7520436 7520470 7520471 7520472 7520473 7520474 7520475 7520476 7520477 7520478 7520479 7520480 7520481 7520482 7520483 7520484 7520485 7520550 8120552 8120553 8120554 8120555 8120556 8120557 8120558 8120559 8120564 8120565 8120570 8120571 8120572 8120573 8120574 8120575 8120576 8120577 8120578 8120579 8120580 8120911 7920912 7920913 7920914 7920915 7920916 7920917 7920918 7920919 7920920 7920922 7920923 7920925 7920926 7920928 7920929 7920931 7920932 79

20934 7921001 7621004 7621004B 7721005 7621008 7621008B 7721009 7621010 7621010B 7721011 7621012 7621012B 7721013 7621013B 77.21014 7621014B 7721015 7621016 7621017 7621017B 7721019 7621019B 7721022 7621022B 7721046 15821106 7621107 7621110 7621112 7621113 7621116 7621117 7621118 7621120 7621121 7621209 80, 8121210 8021211 80, 8121212 80, 8121213 80, 8121214 80, 8121215 8021216 80, 8121218 80, 8121219 80, 8121220 80, 8121221 80, 8121222 8021223 8021224 8021225 80, 8121226 80, 8121227 80, 8121228 80, 8121229 80, 8121230 80, 8121231 80, 8121232 80, 8121233 80, 8121234 80, 8121235 80, 8121236 80, 8121237 80, 8121238 80, 8121404 7821410 7821412 7821414 7821509 7821510 7821511 7821513 7821515 7821516 7821519 7821700 7921750 8021751 8021752 8021753 8021754 8021755 8021756 8021757 8021758 8021759 80







175

PRODUCT INDEX







21760 8021761 8021762 8021763 8022204 7722204B 7822208 7722208B 7822209 7722209B 7822210 7722210B 7822211 7722211B 7822212 7722212B 7822213 7722213B 7822214 7722214B 7822215 7722215B 7822217 7722217B 7822604 7822608 7822610 7822612 7822614 7822615 7824004 7924006 7924008 7924010 7924012 7924015 7924017 7924024 7925106 11325108 11325206 11425207 11425208 11425310 11425316 11425404 11425406 11425407 11425608 10625623 11725624 11725625 11725626 11725627 11725628 11725629 11725630 12125631 11725632 11725633 11725634 11725635 11725636 12125637 11725638 11725639 11725640 11725641 11725642 11725643 11725644 11725645 11725646 11725647 11725648 11725649 11825650 11825651 11825652 11825653 11825654 11825655 11825656 11825657 11825658 12125659 11825660 118

25661 11825662 11825663 11825664 11825665 11825666 11925667 11925668 11925669 11925670 11925671 11925672 11925673 11925674 11925675 11925676 12125677 12025678 12025700 12225701 12225702 12225703 12225704 12225705 12225706 12225707 12225708 12225709 12225710 12225711 12225712 12225713 12225714 12225715 12225716 12226104 7926106 7926108 7926110 7926112 7926115 7926118 7926124 7929010 8229010B 8329011 8429011B 8529012 8529013 8529014 8629014B 8629016 8329016B 8329017 8429017B 8529018 8629018B 8729020 8229022 8729023 8729024 8229025 8729029 8729100 8929101 8929102B 8929103 8929104 8929121 8829122 8829202 9029203 9029204 8229205 8229300 8829301 9029302 8829302B 8829303 8429304 8429305 8629306 8629307 8329308 8429310 9029311 9030800 115

30802 11630804 11630806 11630807 11630808 11630809 11630810 11630820 11630821 11630833 11530834 11530835 11530836 11530837 11530838 11530839 11530840 11530841 11530842 11530843 11530844 11630845 11630846 11630847 11630854 11630856 11630857 11630858 11630859 11630860 11630861 11631420 14731430 14734006 3934008 3934009 3934010 3934011 3934012 3934013 3934014 3934056 3934058 3934059 3934060 3934061 3934062 3934063 3934064 3934108 3934109 3934110 3934111 3934112 3934113 3934114 3934115 3934116 3934117 3934118 3934119 3934157 3934158 3934159 3934160 3934161 3934162 3934163 3934164 3934165 3934166 3934167 3934168 3934169 3934203 3534205 3534206 3534207 3534208 3535008 5835009 5835010 5835011 5835012 5835013 5835014 5835015 58

35016 5835017 5835018 5835019 5835020 5835021 5835022 5835058 5835059 5835060 5835061 5835062 5835063 5835064 5835065 5835066 5835067 5835068 5835069 5835070 5835072 5835110 5835111 5835112 5835113 5835114 5835115 5835116 5835117 5835118 5835119 5835120 5835121 5835122 5835124 5835127 5835160 5835161 5835162 5835163 5835164 5835165 5835166 5835167 5835168 5835169 5835170 5835171 5835172 5835174 5835177 5835180 5835182 5835186 5835200 5535201 5535202 5535203 5535206 5535207 5536107 6536109 6536111 6536113 6536114 6536115 6536116 6536117 6536118 6536119 6536120 6536121 6536122 6536123 6536124 6536125 6536126 6536139 6536140 6536141 6536142 6536143 6536144 6536145 6536146 6536160 6636161 66

36162 6636163 6636164 6636165 6636166 6636167 6636168 6636169 6636170 6636171 6636172 6636173 6636174 6636175 6636176 6636177 6636178 6636179 6636180 6636181 6636182 6636184 6636207 6436208 6436209 6436210 6436211 6436212 6436276 6636317 6536319 6536322 6536324 6536327 6536330 6536332 6536335 6536336 6536338 6536341 6536343 6537114 6937115 6937116 6937117 6937118 6937119 6937120 6937121 6937122 6937123 6937124 6937125 6937126 6937127 6937128 6937129 6937130 6937131 6937132 6937133 6937134 6937135 6937136 6937137 6937138 6937139 6937140 6937141 6937142 6937143 6937144 6937145 6937146 6937147 6937148 6937149 6937150 6937151 6937152 6937153 6937154 6937246 6837247 6837248 6837249 6837250 68

37319 7037320 7037322 7037323 7037324 7037325 7037326 7037328 7037329 7037330 7037331 7037332 7037333 7037334 7037335 7037336 7037337 7037338 7037339 7037340 7056004 9656008 9756009 9956011 9656013 9856014 9856015 9656018 9856026 9756028 9756030 9656032 9656034 10056036 9756038 9756044 10856046 10856048 10856050 10856052 10856054 10856056 10856058 10856060 10856062 10856064 10556066 9456067 9456070 9456072 9456073 9456074 9556076 9456077 9556080 9756081 9956083 9856085 9956093 10556100 9656108 9756110 10056112 10756114 9456115 9456122 9656128 9956130 10356131 10356132 10356133 10356134 10356148 9956149 9956150 9856152 9956161 10556163 10556164 10556191 10256192 10256194 10256199 10256255 10556256 10556257 10556258 105

56259 10556260 10556261 10556262 10556310 9756314 9456316 9456318 9456320 9456321 9456323 9556333 10156346 9356347 9356348 9356349 9356357 9356360 9456362 9456368 5156370 5156374 6156376 5156382 9356384 9356882 10956890 10956897 9556900 9856901 9657002 9657004 9657006 9657008 9657010 9657012 9657013 9657014 9657018 9657020 9657022 9657024 9657026 9657028 9657030 9657031 9657032 9657034 9657036 9657038 9657040 9657042 9657044 9657046 9657116 9657118 9657120 9657122 9657124 9657126 9657128 9657129 9657130 9657131 9657132 9657133 9657134 9657135 9657138 9657142 9657143 9657197 10957199 10957201 10957203 10957205 10957207 10957209 109

57211 10957213 10957215 10957300 10457302 10457304 10457306 10457308 10457310 10457312 10457314 10457316 10457318 10457320 10557321 10557322 10557323 10557324 10557325 10557326 10557327 10557328 10557329 10557367 5157391 9457392 9557393 9457394 9557395 9457396 9557400 10857402 10857404 10857406 10857408 10857410 10857412 10857414 10857416 10857500 10757502 10757504 10757506 10757508 10757510 10757602 10257604 10257606 10257608 10257610 10257612 10257614 10257616 10257618 10257620 10257632 10357634 10357636 10357638 10357640 10357642 10357644 10357650 10357651 10357652 10357653 10357654 10357655 10357656 10357657 10357658 10357659 10357660 10357661 10357662 10357663 10357664 10357670 103

57671 10357672 10357673 10357674 10357675 10357676 10357677 10357678 10357679 10357680 10357681 10357682 10357683 10357684 10357810 10857812 10857814 10857816 10857818 10857820 10857822 10857830 10757832 10757834 10757836 10757838 10757840 10757842 10457844 10457846 10457848 10457850 10457860 10557861 10557862 10557863 10557864 10557865 10557866 10557867 10557900 10957902 10957904 10957906 10957908 10957910 10957912 10957914 10957918 10957920 10957926 10957932 10957942 10957981 9657982 9657983 9657984 9657985 9657986 9657987 9657988 9657989 9657990 9657991 9657992 9657993 9657994 9658001 9858002 9858003 9858004 9858005 9858006 9858007 9858010 9858012 9858014 9858016 98

58018 9858020 9858022 9858023 9858024 9858026 9858028 9858030 9858032 9858034 9858036 9858038 9858040 9858042 9858048 9858049 9858050 9858052 9858054 9858056 9858058 9858060 9858062 9858064 9858066 9858068 9858070 10058072 10058073 10058074 10058075 10058076 10058078 10058080 10058082 10058086 10058090 9858092 9858094 9858200 10058202 10058204 10058206 10058208 10058210 10058212 10058250 10458252 10458254 10458256 10458258 10458260 10458262 10458264 10458266 10458268 10458270 10658271 10658272 10658273 10658274 10658275 10658276 10658277 10658278 10658279 10658280 10658281 10658282 10658283 10658284 10658285 10658286 10658287 10658400 10758402 10758404 10758406 107

58408 10758410 10758412 10758414 10758416 10758418 10758672 3858674 3858676 3858678 3858680 3858682 3858684 3858686 3858800 3858802 3858804 3858806 3858808 3858810 3858812 3858814 3858815 3858836 5758838 5758840 5758842 5758844 5758846 5758848 5758900 2858903 2858906 2858909 2858912 2858915 2858918 3858921 3858924 3858926 9858927 9858928 9858929 9858930 9858931 9859100 10159102 10159104 10159106 10159107 10159108 10159109 10159110 10159111 10159112 10159113 10159114 10159115 10159116 10159117 10159118 10159120 10159122 10159124 10159300 10159302 10159304 10159306 10159308 10159310 10159312 10159314 10159316 10159318 10159320 10159322 10159324 10159326 101

59328 10159330 10159332 10159334 10159326 10159328 10159330 10159332 10161010 11361015 11361017 11361214 11361226 11361227 11361228 11361229 11361230 11361231 11361232 11366030 7566032 7566034 7566036 7566038 7566040 7566042 7566046 7566048 7566050 7566114 7766115 7766116 7766118 7766120 7766122 7766124 7766128 7766305 7766306 7766307 7766308 7766309 7766310 7766311 7766430 7666432 7666434 7666436 7666438 7666440 7666442 7666446 7666448 7666450 7690032 12890059 128412402 162412403 162412406 162412410 162741825 64751828 64

176

PRODUCT INDEX







■ Item Number: 19636 with No.19804 Roller Cabinet and No. 19805 Top Chest ■ Item Number: 19635 Tools Only - 445 pcs. (contains one each of the following:)

177

INDUSTRIAL TOOL SET CONTENTS

10022 6 Pt. 1/4" Dr. Std. Skt. 3/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2"10054 6 Pt. 1/4" Dr. Dp. Skt. 1/4"10055 6 Pt. 1/4" Dr. Dp. Skt. 9/32"10056 6 Pt. 1/4" Dr. Dp. Skt. 5/16"10057 6 Pt. 1/4" Dr. Dp. Skt. 11/32"10058 6 Pt. 1/4" Dr. Dp. Skt. 3/8"10059 6 Pt. 1/4" Dr. Dp. Skt. 7/16"10060 6 Pt. 1/4" Dr. Dp. Skt. 1/2"10102 6 Pt. 1/4" Dr. Std. Skt. 4mm10104 6 Pt. 1/4" Dr. Std. Skt. 5mm10106 6 Pt. 1/4" Dr. Std. Skt. 6mm10107 6 Pt. 1/4" Dr. Std. Skt. 7mm10108 6 Pt. 1/4" Dr. Std. Skt. 8mm10109 6 Pt. 1/4" Dr. Std. Skt. 9mm10110 6 Pt. 1/4" Dr. Std. Skt. 10mm10111 6 Pt. 1/4" Dr. Std. Skt. 11mm10112 6 Pt. 1/4" Dr. Std. Skt. 12mm10113 6 Pt. 1/4" Dr. Std. Skt. 13mm10156 6 Pt. 1/4" Dr. Dp. Skt. 6mm10157 6 Pt. 1/4" Dr. Dp. Skt. 7mm10158 6 Pt. 1/4" Dr. Dp. Skt. 8mm10159 6 Pt. 1/4" Dr. Dp. Skt. 9mm10160 6 Pt. 1/4" Dr. Dp. Skt. 10mm10161 6 Pt. 1/4" Dr. Dp. Skt. 11mm10162 6 Pt. 1/4" Dr. Dp. Skt. 12mm10163 6 Pt. 1/4" Dr. Dp. Skt. 13mm10164 6 Pt. 1/4" Dr. Dp. Skt. 14mm10900 1/4" Dr. Ratchet Teardrop-Q.R.10902 1/4" Dr. Extension 1-1/2"10910 1/4" Dr. Extension 6"10915 1/4" Dr. Spinner Handle10920 1/4" Dr. Flex Handle10930 1/4" Dr. Universal Joint11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11215 12 Pt. 3/8" Dr. Std. Skt. 13/16"11216 12 Pt. 3/8" Dr. Std. Skt. 7/8"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11265 12 Pt. 3/8" Dr. Dp. Skt. 13/16"11266 12 Pt. 3/8" Dr. Dp. Skt. 7/8"11309 12 Pt. 3/8" Dr. Std. Skt. 9mm11310 12 Pt. 3/8" Dr. Std. Skt. 10mm11311 12 Pt. 3/8" Dr. Std. Skt. 11mm11312 12 Pt. 3/8" Dr. Std. Skt. 12mm11313 12 Pt. 3/8" Dr. Std. Skt. 13mm11314 12 Pt. 3/8" Dr. Std. Skt. 14mm11315 12 Pt. 3/8" Dr. Std. Skt. 15mm11317 12 Pt. 3/8" Dr. Std. Skt. 17mm11318 12 Pt. 3/8" Dr. Std. Skt. 18mm11319 12 Pt. 3/8" Dr. Std. Skt. 19mm11359 12 Pt. 3/8" Dr. Dp. Skt. 9mm11360 12 Pt. 3/8" Dr. Dp. Skt. 10mm11361 12 Pt. 3/8" Dr. Dp. Skt. 11mm11362 12 Pt. 3/8" Dr. Dp. Skt. 12mm11363 12 Pt. 3/8" Dr. Dp. Skt. 13mm11364 12 Pt. 3/8" Dr. Dp. Skt. 14mm11365 12 Pt. 3/8" Dr. Dp. Skt. 15mm11366 12 Pt. 3/8" Dr. Dp. Skt. 16mm11367 12 Pt. 3/8" Dr. Dp. Skt. 17mm11368 12 Pt. 3/8" Dr. Dp. Skt. 18mm11369 12 Pt. 3/8" Dr. Dp. Skt. 19mm11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11508 6 Pt. 3/8" Dr. Universal Skt. 3/8"11509 6 Pt. 3/8" Dr. Universal Skt. 7/16"11510 6 Pt. 3/8" Dr. Universal Skt. 1/2"11511 6 Pt. 3/8" Dr. Universal Skt. 9/16"11512 6 Pt. 3/8" Dr. Universal Skt. 5/8"11513 6 Pt. 3/8" Dr. Universal Skt. 11/16"11514 6 Pt. 3/8" Dr. Universal Skt. 3/4"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11916 3/8" Dr. Locking Extension 5"11917 3/8" Dr. Locking Extension 8"11918 3/8" Dr. Locking Extension 12"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint12208 12 Pt. 1/2" Dr. Std. Skt. 3/8"12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"

12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"12310 12 Pt. 1/2" Dr. Std. Skt. 10mm12311 12 Pt. 1/2" Dr. Std. Skt. 11mm12312 12 Pt. 1/2" Dr. Std. Skt. 12mm12313 12 Pt. 1/2" Dr. Std. Skt. 13mm12314 12 Pt. 1/2" Dr. Std. Skt. 14mm12315 12 Pt. 1/2" Dr. Std. Skt. 15mm12316 12 Pt. 1/2" Dr. Std. Skt. 16mm12317 12 Pt. 1/2" Dr. Std. Skt. 17mm12318 12 Pt. 1/2" Dr. Std. Skt. 18mm12319 12 Pt. 1/2" Dr. Std. Skt. 19mm12320 12 Pt. 1/2" Dr. Std. Skt. 20mm12321 12 Pt. 1/2" Dr. Std. Skt. 21mm12322 12 Pt. 1/2" Dr. Std. Skt. 22mm12323 12 Pt. 1/2" Dr. Std. Skt. 23mm12324 12 Pt. 1/2" Dr. Std. Skt. 24mm12325 12 Pt. 1/2" Dr. Std. Skt. 25mm12326 12 Pt. 1/2" Dr. Std. Skt. 26mm12327 12 Pt. 1/2" Dr. Std. Skt. 27mm12328 12 Pt. 1/2" Dr. Std. Skt. 28mm12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint13203 12 Pt. 3/4" Dr. Std. Skt. 15/16"13204 12 Pt. 3/4" Dr. Std. Skt. 1"13205 12 Pt. 3/4" Dr. Std. Skt. 1-1/16"13206 12 Pt. 3/4" Dr. Std. Skt. 1-1/8"13207 12 Pt. 3/4" Dr. Std. Skt. 1-3/16"13208 12 Pt. 3/4" Dr. Std. Skt. 1-1/4"13209 12 Pt. 3/4" Dr. Std. Skt. 1-5/16"13210 12 Pt. 3/4" Dr. Std. Skt. 1-3/8"13211 12 Pt. 3/4" Dr. Std. Skt. 1-7/16"13212 12 Pt. 3/4" Dr. Std. Skt. 1-1/2"13213 12 Pt. 3/4" Dr. Std. Skt. 1-9/16"13214 12 Pt. 3/4" Dr. Std. Skt. 1-5/8"13215 12 Pt. 3/4" Dr. Std. Skt. 1-11/16"13216 12 Pt. 3/4" Dr. Std. Skt. 1-3/4"13217 12 Pt. 3/4" Dr. Std. Skt. 1-13/16"13218 12 Pt. 3/4" Dr. Std. Skt. 1-7/8"13220 12 Pt. 3/4" Dr. Std. Skt. 2"13900 3/4" Dr. Ratchet Teardrop-Q.R.13910 3/4" Dr. Extension 5"13912 3/4" Dr. Extension 8"13914 3/4" Dr. Extension 16"13920 3/4" Dr. Flex Handle13922 3/4" Dr. Sliding T Handle13927 3/4" Dr. Adapter 3/4" X 1/2"13929 3/4" Dr. Universal Joint20204 12 Pt. Combo. Wr. 1/4"20206 12 Pt. Combo. Wr. 5/16"20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"20223 12 Pt. Combo. Wr. 1-5/16"20224 12 Pt. Combo. Wr. 1-3/8"20225 12 Pt. Combo. Wr. 1-7/16"20226 12 Pt. Combo. Wr. 1-1/2"20307 12 Pt. Combo. Wr. 7mm20308 12 Pt. Combo. Wr. 8mm20309 12 Pt. Combo. Wr. 9mm20310 12 Pt. Combo. Wr. 10mm20311 12 Pt. Combo. Wr. 11mm20312 12 Pt. Combo. Wr. 12mm20313 12 Pt. Combo. Wr. 13mm20314 12 Pt. Combo. Wr. 14mm20315 12 Pt. Combo. Wr. 15mm20316 12 Pt. Combo. Wr. 16mm

20317 12 Pt. Combo. Wr. 17mm20318 12 Pt. Combo. Wr. 18mm20319 12 Pt. Combo. Wr. 19mm20321 12 Pt. Combo. Wr. 21mm20322 12 Pt. Combo. Wr. 22mm20550 3/8" Dr. Crowfoot Wr. 3/8"20552 3/8" Dr. Crowfoot Wr. 7/16"20553 3/8" Dr. Crowfoot Wr. 1/2"20554 3/8" Dr. Crowfoot Wr. 9/16"20555 3/8" Dr. Crowfoot Wr. 5/8"20556 3/8" Dr. Crowfoot Wr. 11/16"20557 3/8" Dr. Crowfoot Wr. 3/4"20558 3/8" Dr. Crowfoot Wr. 13/16"20559 3/8" Dr. Crowfoot Wr. 7/8"20564 3/8" Dr. Crowfoot Wr. 1"20565 3/8" Dr. Crowfoot Wr. 10mm20570 3/8" Dr. Crowfoot Wr. 11mm20571 3/8" Dr. Crowfoot Wr. 12mm20572 3/8" Dr. Crowfoot Wr. 13mm20573 3/8" Dr. Crowfoot Wr. 14mm20574 3/8" Dr. Crowfoot Wr. 15mm20575 3/8" Dr. Crowfoot Wr. 16mm20576 3/8" Dr. Crowfoot Wr. 17mm20577 3/8" Dr. Crowfoot Wr. 18mm20578 3/8" Dr. Crowfoot Wr. 19mm21004 15D Angle Open End Wr. 1/4"X5/16"21005 15D Angle Open End Wr. 5/16"X3/8"21009 15D Angle Open End Wr. 7/16"X1/2"21010 15D Angle Open End Wr. 1/2"X9/16"21011 15D Angle Open End Wr. 9/16"X5/8"21012 15D Angle Open End Wr. 5/8"X3/4"21013 15D Angle Open End Wr.

11/16"X13/16"21014 15D Angle Open End Wr. 3/4"X7/8"21017 15D Angle Open End Wr. 15/16"X1"21019 15D Angle Open End Wr. 1-1/16"X

1-1/8"21106 15D Angle Met. Open End Wr.

6X8mm21107 15D Angle Met. Open End Wr.





17X19mm21404 6 Pt. Dbl. End Flare Nut Wr.

3/8"X7/16"21410 6 Pt. Dbl. End Flare Nut Wr.


5/8"X11/16"21511 6 Pt. Met. Dbl. End Flare Nut Wr.

11X12mm21513 6 Pt. Met. Dbl. End Flare Nut Wr.

13X14mm21515 6 Pt. Met. Dbl. End Flare Nut Wr.

15X17mm22208 12 Pt. Offset Box Wr. 3/8"X7/16"22210 12 Pt. Offset Box Wr. 1/2"X9/16"22212 12 Pt. Offset Box Wr. 5/8"X3/4"22213 12 Pt. Offset Box Wr. 11/16"X13/16"22214 12 Pt. Offset Box Wr. 3/4"X7/8"22604 Ratcheting Box End Wr. 1/4"X5/16"22608 Ratcheting Box End Wr. 3/8"X7/16"22610 Ratcheting Box End Wr. 1/2"X9/16"22612 Ratcheting Box End Wr.

5/8"X11/16"24006 Adj. Wr. 6"24008 Adj. Wr. 8"24010 Adj. Wr. 10"24012 Adj. Wr. 12"25106 Slip Joint Pliers 6"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy

Duty25208 Linesman Pliers 8"25310 Rib Lock Pliers 10"25316 Rib Lock Pliers 16"25406 Diagonal Cutting Pliers 6"25624 Pin Punch, Cut 3/32", Hex 5/16",

Long 4-3/4"25625 Pin Punch, Cut 1/8", Hex 5/16",

Long 5"25626 Pin Punch, Cut 5/32", Hex 5/16",


Long 5-1/2"25628 Pin Punch, Cut 1/4", Hex 3/8", Long

7"25629 Pin Punch, Cut 5/16", Hex 1/2",

Long 7"25632 Lg. Taper Punch, Cut 5/32", Hex

1/2", Long 8-1/2"25633 Lg. Taper Punch, Cut 3/16", Hex

1/2", Long 9"25634 Lg. Taper Punch, Cut 1/4", Hex 5/8",

Long 11"

25635 Lg. Taper Punch, Cut 5/16", Hex5/8", Long 11"

25639 Solid Punch, Cut 1/8", Hex 5/16",Long 4-1/2"

25640 Solid Punch Cut 5/32", Hex 3/8"Long 5"

25641 Solid Punch, Cut 3/16", Hex 3/8",Long 5"




25645 Prick Punch, Hex 3/8", Long 5"25647 Center Punch, Hex 3/8", Long 5"25648 Center Punch, Hex 1/2", Long 6"25651 Cold Chisel, Cut 3/8", Hex 5/16",

Long 5-1/4"25652 Cold Chisel, Cut 7/16", Hex 3/8",


Long 6"25654 Cold Chisel, Cut 5/8", Hex 1/2",



Long 7-1/2"25657 Cold Chisel Cut 1", Hex 7/8", Long

8"25664 Lg. Cold Chisel, Cut 3/4", Hex 5/8",

Long 12"25668 Pinch Bar Long 16"25670 Roll Bar Hex 1/2" Long 15"25702 8 Oz. 12-1/4" Ball Pein Hammer25704 16 Oz. 14-1/4" Ball Pein Hammer25707 32 Oz. 16" Ball Pein Hammer25712 3 Lb. 10" Drilling Hammer25714 20 Oz. Rubber Mallet25716 12 Oz. 11-5/8" Soft Face Hammer30802 Solid Shaft Nut Driver 3/16"30804 Solid Shaft Nut Driver 1/4"30806 Solid Shaft Nut Driver 5/16"30807 Solid Shaft Nut Driver 11/32"30808 Solid Shaft Nut Driver 3/8"30809 Solid Shaft Nut Driver 7/16"30810 Solid Shaft Nut Driver 1/2"30833 3/16" X 3" Cabinet Tip Screwdriver30835 #0 X 2 1/2" Phillips Screwdriver

w/ Clip30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30843 3/8" X 8" Square Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver30854 Solid Shaft Nut Driver 5mm30856 Solid Shaft Nut Driver 6mm30857 Solid Shaft Nut Driver 7mm30858 Solid Shaft Nut Driver 8mm30859 Solid Shaft Nut Driver 9mm30860 Solid Shaft Nut Driver 10mm30861 Solid Shaft Nut Driver 11mm57002 .028" Short Arm Hex Key57004 .035" Short Arm Hex Key57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57013 7/64" Short Arm Hex Key57014 1/8" Short Arm Hex Key57018 9/64" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key57032 1/2" Short Arm Hex Key57034 9/16" Short Arm Hex Key57036 5/8" Short Arm Hex Key57100 3/16" Hollow Shaft Nut Driver57102 1/4" Hollow Shaft Nut Driver57104 5/16" Hollow Shaft Nut Driver57106 11/32" Hollow Shaft Nut Driver57108 3/8" Hollow Shaft Nut Driver57110 7/16" Hollow Shaft Nut Driver57112 1/2" Hollow Shaft Nut Driver57116 1.5mm Short Arm Hex Key57118 2mm Short Arm Hex Key57120 2.5mm Short Arm Hex Key57122 3mm Short Arm Hex Key57124 4mm Short Arm Hex Key57126 5mm Short Arm Hex Key57128 6mm Short Arm Hex Key57129 0.7mm Short Arm Hex Key57130 8mm Short Arm Hex Key57131 0.9mm Short Arm Hex Key

57132 10mm Short Arm Hex Key57133 12mm Short Arm Hex Key57134 14mm Short Arm Hex Key57135 1.3mm Short Arm Hex Key57138 17mm Short Arm Hex Key58672 3/8" Dr. Hex Bit Skt. 2mm58674 3/8" Dr. Hex Bit Skt. 2.5mm58676 3/8" Dr. Hex Bit Skt. 3mm58678 3/8" Dr. Hex Bit Skt. 4mm58680 3/8" Dr. Hex Bit Skt. 5mm58682 3/8" Dr. Hex Bit Skt. 6mm58684 3/8" Dr. Hex Bit Skt. 8mm58686 3/8" Dr. Hex Bit Skt. 10mm58800 3/8" Dr. Hex Bit Skt. 7/64"58802 3/8" Dr. Hex Bit Skt. 1/8"58804 3/8" Dr. Hex Bit Skt. 9/64"58806 3/8" Dr. Hex Bit Skt. 5/32"58808 3/8" Dr. Hex Bit Skt. 3/16"58810 3/8" Dr. Hex Bit Skt. 7/32"58812 3/8" Dr. Hex Bit Skt. 1/4"58814 3/8" Dr. Hex Bit Skt. 5/16"58815 3/8" Dr. Hex Bit Skt. 3/8"58836 1/2" Dr. Hex Bit Skt. 1/4"58838 1/2" Dr. Hex Bit Skt. 5/16"58840 1/2" Dr. Hex Bit Skt. 3/8"58842 1/2" Dr. Hex Bit Skt. 7/16"58844 1/2" Dr. Hex Bit Skt. 1/2"58846 1/2" Dr. Hex Bit Skt. 9/16"58848 1/2" Dr. Hex Bit Skt. 5/8"61015 Challenger Hacksaw66030 6 Pt. Midget Combo. Wr. 5/32"66032 6 Pt. Midget Combo. Wr. 3/16"66034 12 Pt. Midget Combo. Wr. 13/64"66036 12 Pt. Midget Combo. Wr. 7/32"66038 12 Pt. Midget Combo. Wr. 15/64"66040 12 Pt. Midget Combo. Wr. 1/4"66042 12 Pt. Midget Combo. Wr. 9/32"66044 12 Pt. Midget Combo. Wr. 5/16"66046 12 Pt. Midget Combo. Wr. 3/8"66048 12 Pt. Midget Combo. Wr. 7/16"66114 Midget Open End Wr. 7/32"66115 Midget Open End Wr. 15/64"66116 Midget Open End Wr. 1/4"66118 Midget Open End Wr. 9/32"66120 Midget Open End Wr. 5/16"66122 Midget Open End Wr. 11/32"66124 Midget Open End Wr. 3/8"66128 Midget Open End Wr. 7/16"66305 Midget Open End Wr. 5.5mm66306 Midget Open End Wr. 6mm66307 Midget Open End Wr. 7mm66308 Midget Open End Wr. 8mm66309 Midget Open End Wr. 9mm66310 Midget Open End Wr. 10mm66311 Midget Open End Wr. 11mm66430 6 Pt. Midget Combo. Wr. 4mm66432 6 Pt. Midget Combo. Wr. 4.5mm66434 12 Pt. Midget Combo. Wr. 5mm66436 12 Pt. Midget Combo. Wr. 5.5mm66438 12 Pt. Midget Combo. Wr. 6mm66440 12 Pt. Midget Combo. Wr. 7mm66442 12 Pt. Midget Combo. Wr. 8mm66446 12 Pt. Midget Combo. Wr. 9mm66448 12 Pt. Midget Combo. Wr. 10mm66450 12 Pt. Midget Combo. Wr. 11mm161 Deluxe Feeler Gauge2162 Electrical Wire Stripper & Crimper2297 7" 3-Jaw Puller1708 Stud Extractor2534 Lock Ring Pliers3151 Large Convertible Snap Ring Pliers485 Gasket Scraper2108 Telescoping Mirror2281 Telescoping Magnetic Retrieving

Tool2951 Micrometer Torq Wr 15-100ft/lb

3/8" Dr.2952 Micrometer Torq Wr 30-250ft/lb

1/2" Dr.23 101C Straight Cutting, Aviation Snip23 104 10" Straight Cutting Snip31 200C Heavy Duty Retractable Utility Knife72 1713 3/8" Dr. 11/16" Drag Link Skt.81 601 Replacement Tip for 81600 (Hard)81 602 Replacement Tip for 81600 (Soft)3009 Tape Measure1109 Screw Extractor 1/8"1110 Screw Extractor 3/16"1111 Screw Extractor 15/64"1112 Screw Extractor 5/16"1113 Screw Extractor 3/8"19804 Roller Cabinet, 7 drawer19805 Top Chest, 6 drawer

Approx. Wt.19636: 523 lbs.19635: 196 lbs.19804: 175 lbs.19805: 150 lbs.

Number Description Number Description Number Description Number Description Number Description

447 Piece Fractional / Metric Master Mechanic’s Set (1/4", 3/8", 1/2" & 3/4" Drives)

10022 6 Pt. 1/4" Dr. Std. Skt. 3/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2"10054 6 Pt. 1/4" Dr. Dp. Skt. 1/4"10055 6 Pt. 1/4" Dr. Dp. Skt. 9/32"10056 6 Pt. 1/4" Dr. Dp. Skt. 5/16"10057 6 Pt. 1/4" Dr. Dp. Skt. 11/32"10058 6 Pt. 1/4" Dr. Dp. Skt. 3/8"10059 6 Pt. 1/4" Dr. Dp. Skt. 7/16"10060 6 Pt. 1/4" Dr. Dp. Skt. 1/2"10900 1/4" Dr. Ratchet Teardrop-Q.R.10902 1/4" Dr. Extension 1-1/2"10910 1/4" Dr. Extension 6"10915 1/4" Dr. Spinner Handle10920 1/4" Dr. Flex Handle10930 1/4" Dr. Universal Joint11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11215 12 Pt. 3/8" Dr. Std. Skt. 13/16"11216 12 Pt. 3/8" Dr. Std. Skt. 7/8"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11265 12 Pt. 3/8" Dr. Dp. Skt. 13/16"11266 12 Pt. 3/8" Dr. Dp. Skt. 7/8"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11508 6 Pt. 3/8" Dr. Universal Skt. 3/8"11509 6 Pt. 3/8" Dr. Universal Skt. 7/16"11510 6 Pt. 3/8" Dr. Universal Skt. 1/2"11511 6 Pt. 3/8" Dr. Universal Skt. 9/16"11512 6 Pt. 3/8" Dr. Universal Skt. 5/8"11513 6 Pt. 3/8" Dr. Universal Skt. 11/16"11514 6 Pt. 3/8" Dr. Universal Skt. 3/4"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11916 3/8" Dr. Locking Extension 5"11917 3/8" Dr. Locking Extension 8"11918 3/8" Dr. Locking Extension 12"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint12208 12 Pt. 1/2" Dr. Std. Skt. 3/8"12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"

12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint13203 12 Pt. 3/4" Dr. Std. Skt. 15/16"13204 12 Pt. 3/4" Dr. Std. Skt. 1"13205 12 Pt. 3/4" Dr. Std. Skt. 1-1/16"13206 12 Pt. 3/4" Dr. Std. Skt. 1-1/8"13207 12 Pt. 3/4" Dr. Std. Skt. 1-3/16"13208 12 Pt. 3/4" Dr. Std. Skt. 1-1/4"13209 12 Pt. 3/4" Dr. Std. Skt. 1-5/16"13210 12 Pt. 3/4" Dr. Std. Skt. 1-3/8"13211 12 Pt. 3/4" Dr. Std. Skt. 1-7/16"13212 12 Pt. 3/4" Dr. Std. Skt. 1-1/2"13213 12 Pt. 3/4" Dr. Std. Skt. 1-9/16"13214 12 Pt. 3/4" Dr. Std. Skt. 1-5/8"13215 12 Pt. 3/4" Dr. Std. Skt. 1-11/16"13216 12 Pt. 3/4" Dr. Std. Skt. 1-3/4"13217 12 Pt. 3/4" Dr. Std. Skt. 1-13/16"13218 12 Pt. 3/4" Dr. Std. Skt. 1-7/8"13220 12 Pt. 3/4" Dr. Std. Skt. 2"13900 3/4" Dr. Ratchet Teardrop-Q.R.13910 3/4" Dr. Extension 5"13912 3/4" Dr. Extension 8"13914 3/4" Dr. Extension 16"13920 3/4" Dr. Flex Handle13922 3/4" Dr. Sliding T Handle13927 3/4" Dr. Adapter 3/4" X 1/2"13929 3/4" Dr. Universal Joint20204 12 Pt. Combo. Wr. 1/4"20206 12 Pt. Combo. Wr. 5/16"20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"20223 12 Pt. Combo. Wr. 1-5/16"20224 12 Pt. Combo. Wr. 1-3/8"20225 12 Pt. Combo. Wr. 1-7/16"20226 12 Pt. Combo. Wr. 1-1/2"20550 3/8" Dr. Crowfoot Wr. 3/8"20552 3/8" Dr. Crowfoot Wr. 7/16"20553 3/8" Dr. Crowfoot Wr. 1/2"20554 3/8" Dr. Crowfoot Wr. 9/16"20555 3/8" Dr. Crowfoot Wr. 5/8"20556 3/8" Dr. Crowfoot Wr. 11/16"20557 3/8" Dr. Crowfoot Wr. 3/4"20558 3/8" Dr. Crowfoot Wr. 13/16"20559 3/8" Dr. Crowfoot Wr. 7/8"20564 3/8" Dr. Crowfoot Wr. 1"21004 15D Angle Open End Wr. 1/4"X5/16"21005 15D Angle Open End Wr. 5/16"X3/8"21009 15D Angle Open End Wr. 7/16"X1/2"

21010 15D Angle Open End Wr. 1/2"X9/16"21011 15D Angle Open End Wr. 9/16"X5/8"21012 15D Angle Open End Wr. 5/8"X3/4"21013 15D Angle Open End Wr.


1-1/8"21404 6 Pt. Dbl. End Flare Nut Wr.



5/8"X11/16"22208 12 Pt. Offset Box Wr. 3/8"X7/16"22210 12 Pt. Offset Box Wr. 1/2"X9/16"22212 12 Pt. Offset Box Wr. 5/8"X3/4"22213 12 Pt. Offset Box Wr. 11/16"X13/16"22214 12 Pt. Offset Box Wr. 3/4"X7/8"22604 Ratcheting Box End Wr. 1/4"X5/16"22608 Ratcheting Box End Wr. 3/8"X7/16"22610 Ratcheting Box End Wr. 1/2"X9/16"22612 Ratcheting Box End Wr. 5/8"X11/16"24006 Adj. Wr. 6"24008 Adj. Wr. 8"24010 Adj. Wr. 10"24012 Adj. Wr. 12"25106 Slip Joint Pliers 6"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy

Duty25208 Linesman Pliers 8"25310 Rib Lock Pliers 10"25316 Rib Lock Pliers 16"25406 Diagonal Cutting Pliers 6"25624 Pin Punch, Cut 3/32", Hex 5/16",










5/8", Long 11"25639 Solid Punch, Cut 1/8", Hex 5/16",

Long 4-1/2"25640 Solid Punch Cut 5/32", Hex 3/8",

Long 5"25641 Solid Punch, Cut 3/16", Hex 3/8",




Long 8"25645 Prick Punch, Hex 3/8", Long 5"25647 Center Punch, Hex 3/8", Long 5"25648 Center Punch, Hex 1/2", Long 6"25651 Cold Chisel, Cut 3/8", Hex 5/16",

Long 5-1/4"

25652 Cold Chisel, Cut 7/16", Hex 3/8",Long 5-1/2"

25653 Cold Chisel, Cut 1/2", Hex 3/8",Long 6"




25657 Cold Chisel Cut 1", Hex 7/8", Long 8"

25664 Lg. Cold Chisel, Cut 3/4", Hex 5/8",Long 12"

25668 Pinch Bar Long 16"25670 Roll Bar Hex 1/2" Long 15"25702 8 Oz. 12-1/4" Ball Pein Hammer25704 16 Oz. 14-1/4" Ball Pein Hammer25707 32 Oz. 16 Ball Pein Hammer25712 3 Lb. 10" Drilling Hammer25714 20 Oz. Rubber Mallet25716 12 Oz. 11-5/8" Soft Face Hammer30802 Solid Shaft Nut Driver 3/16"30804 Solid Shaft Nut Driver 1/4"30806 Solid Shaft Nut Driver 5/16"30807 Solid Shaft Nut Driver 11/32"30808 Solid Shaft Nut Driver 3/8"30809 Solid Shaft Nut Driver 7/16"30810 Solid Shaft Nut Driver 1/2"30833 3/16" X 3" Cabinet Tip Screwdriver30835 #0 X 2 1/2" Phillips Screwdriver


Screwdriver57002 .028" Short Arm Hex Key57004 .035" Short Arm Hex Key57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57013 7/64" Short Arm Hex Key57014 1/8" Short Arm Hex Key57018 9/64" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key57032 1/2" Short Arm Hex Key57034 9/16" Short Arm Hex Key57036 5/8" Short Arm Hex Key57100 3/16" Hollow Shaft Nut Driver57102 1/4" Hollow Shaft Nut Driver57104 5/16" Hollow Shaft Nut Driver57106 11/32" Hollow Shaft Nut Driver57108 3/8" Hollow Shaft Nut Driver57110 7/16" Hollow Shaft Nut Driver57112 1/2" Hollow Shaft Nut Driver58800 3/8" Dr. Hex Bit Skt. 7/64"58802 3/8" Dr. Hex Bit Skt. 1/8"58804 3/8" Dr. Hex Bit Skt. 9/64"58806 3/8" Dr. Hex Bit Skt. 5/32"58808 3/8" Dr. Hex Bit Skt. 3/16"58810 3/8" Dr. Hex Bit Skt. 7/32"58812 3/8" Dr. Hex Bit Skt. 1/4"58814 3/8" Dr. Hex Bit Skt. 5/16"

58815 3/8" Dr. Hex Bit Skt. 3/8"58836 1/2" Dr. Hex Bit Skt. 1/4"58838 1/2" Dr. Hex Bit Skt. 5/16"58840 1/2" Dr. Hex Bit Skt. 3/8"58842 1/2" Dr. Hex Bit Skt. 7/16"58844 1/2" Dr. Hex Bit Skt. 1/2"58846 1/2" Dr. Hex Bit Skt. 9/16"58848 1/2" Dr. Hex Bit Skt. 5/8"61015 Challenger Hacksaw66030 6 Pt. Midget Combo. Wr. 5/32"66032 6 Pt. Midget Combo. Wr. 3/16"66034 12 Pt. Midget Combo. Wr. 13/64"66036 12 Pt. Midget Combo. Wr. 7/32"66038 12 Pt. Midget Combo. Wr. 15/64"66040 12 Pt. Midget Combo. Wr. 1/4"66042 12 Pt. Midget Combo. Wr. 9/32"66044 12 Pt. Midget Combo. Wr. 5/16"66046 12 Pt. Midget Combo. Wr. 3/8"66048 12 Pt. Midget Combo. Wr. 7/16"66114 Midget Open End Wr. 7/32"66115 Midget Open End Wr. 15/64"66116 Midget Open End Wr. 1/4"66118 Midget Open End Wr. 9/32"66120 Midget Open End Wr. 5/16"66122 Midget Open End Wr. 11/32"66124 Midget Open End Wr. 3/8"66128 Midget Open End Wr. 7/16"161 Deluxe Feeler Gauge2162 Electrical Wire Stripper & Crimper2297 7" 3-Jaw Puller1708 Stud Extractor2534 Lock Ring Pliers3151 Large Convertible Snap Ring Pliers485 Gasket Scraper2108 Telescoping Mirror2281 Telescoping Magnetic Retrieving



1/2" Dr.23 101C Straight Cutting, Aviation Snip23 104 10" Straight Cutting Snip31 200C Heavy Duty Retractable Utility

Knife72 1713 3/8" Dr. 11/16" Drag Link Skt.81 601 Replacement Tip for 81600 (Hard)81 602 Replacement Tip for 81600 (Soft)3009 Tape Measure1109 Screw Extractor 1/8"1110 Screw Extractor 3/16"1111 Screw Extractor 15/64"1112 Screw Extractor 5/16"1113 Screw Extractor 3/8"19804 Roller Cabinet, 7 drawer19805 Top Chest, 6 drawer

Approx. Wt.19634: 492 lbs.19633: 165 lbs.19804: 175 lbs.19805: 150 lbs.

178



■ Item Number: 19634 with No.19804 Roller Cabinet and No. 19805 Top Chest ■ Item Number: 19633 Tools Only - 305 pcs. (contains one each of the following:)

307 Piece Master Mechanic’s Set (1/4", 3/8", 1/2" & 3/4" Drives)

179


10021 6 Pt. 1/4” Dr. Std. Skt. 5/32”10022 6 Pt. 1/4” Dr. Std. Skt. 3/16”10023 6 Pt. 1/4” Dr. Std. Skt. 7/32”10024 6 Pt. 1/4” Dr. Std. Skt. 1/4”10025 6 Pt. 1/4” Dr. Std. Skt. 9/32”10026 6 Pt. 1/4” Dr. Std. Skt. 5/16”10027 6 Pt. 1/4” Dr. Std. Skt. 11/32”10028 6 Pt. 1/4” Dr. Std. Skt. 3/8”10029 6 Pt. 1/4” Dr. Std. Skt. 7/16”10030 6 Pt. 1/4” Dr. Std. Skt. 1/2”10052 6 Pt. 1/4” Dr. Dp. Skt. 3/16”10053 6 Pt. 1/4” Dr. Dp. Skt. 7/32”10054 6 Pt. 1/4” Dr. Dp. Skt. 1/4”10055 6 Pt. 1/4” Dr. Dp. Skt. 9/32”10056 6 Pt. 1/4” Dr. Dp. Skt. 5/16”10057 6 Pt. 1/4” Dr. Dp. Skt. 11/32”10058 6 Pt. 1/4” Dr. Dp. Skt. 3/8”10059 6 Pt. 1/4” Dr. Dp. Skt. 7/16”10060 6 Pt. 1/4” Dr. Dp. Skt. 1/2”10102 6 Pt. 1/4” Dr. Std. Skt. 4mm10104 6 Pt. 1/4” Dr. Std. Skt. 5mm10106 6 Pt. 1/4” Dr. Std. Skt. 6mm10107 6 Pt. 1/4” Dr. Std. Skt. 7mm10108 6 Pt. 1/4” Dr. Std. Skt. 8mm10109 6 Pt. 1/4” Dr. Std. Skt. 9mm10110 6 Pt. 1/4” Dr. Std. Skt. 10mm10111 6 Pt. 1/4” Dr. Std. Skt. 11mm10112 6 Pt. 1/4” Dr. Std. Skt. 12mm10113 6 Pt. 1/4” Dr. Std. Skt. 13mm10152 6 Pt. 1/4” Dr. Dp. Skt. 4mm10154 6 Pt. 1/4” Dr. Dp. Skt. 5mm10156 6 Pt. 1/4” Dr. Dp. Skt. 6mm10157 6 Pt. 1/4” Dr. Dp. Skt. 7mm10158 6 Pt. 1/4” Dr. Dp. Skt. 8mm10159 6 Pt. 1/4” Dr. Dp. Skt. 9mm10160 6 Pt. 1/4” Dr. Dp. Skt. 10mm10161 6 Pt. 1/4” Dr. Dp. Skt. 11mm10162 6 Pt. 1/4” Dr. Dp. Skt. 12mm10163 6 Pt. 1/4” Dr. Dp. Skt. 13mm10164 6 Pt. 1/4” Dr. Dp. Skt. 14mm10202 12 Pt. 1/4” Dr. Std. Skt. 3/16”10203 12 Pt. 1/4” Dr. Std. Skt. 7/32”10204 12 Pt. 1/4” Dr. Std. Skt. 1/4”10205 12 Pt. 1/4” Dr. Std. Skt. 9/32”10206 12 Pt. 1/4” Dr. Std. Skt. 5/16”10207 12 Pt. 1/4” Dr. Std. Skt. 11/32”10208 12 Pt. 1/4” Dr. Std. Skt. 3/8”10209 12 Pt. 1/4” Dr. Std. Skt. 7/16”10210 12 Pt. 1/4” Dr. Std. Skt. 1/2”10902 1/4” Dr. Extension 1-1/2”10905 1/4” Dr. Extension 3”10909 1/4” Dr. Round Head Ratchet10910 1/4” Dr. Extension 6”10915 1/4” Dr. Spinner Handle11006 6 Pt. 3/8” Dr. Std. Skt. 5/16”11008 6 Pt. 3/8” Dr. Std. Skt. 3/8”11009 6 Pt. 3/8” Dr. Std. Skt. 7/16”11010 6 Pt. 3/8” Dr. Std. Skt. 1/2”11011 6 Pt. 3/8” Dr. Std. Skt. 9/16”11012 6 Pt. 3/8” Dr. Std. Skt. 5/8”

11013 6 Pt. 3/8” Dr. Std. Skt. 11/16”11014 6 Pt. 3/8” Dr. Std. Skt. 3/4”11015 6 Pt. 3/8” Dr. Std. Skt. 13/16”11058 6 Pt. 3/8” Dr. Dp. Skt. 3/8”11059 6 Pt. 3/8” Dr. Dp. Skt. 7/16”11060 6 Pt. 3/8” Dr. Dp. Skt. 1/2”11061 6 Pt. 3/8” Dr. Dp. Skt. 9/16”11062 6 Pt. 3/8” Dr. Dp. Skt. 5/8”11063 6 Pt. 3/8” Dr. Dp. Skt. 11/16”11064 6 Pt. 3/8” Dr. Dp. Skt. 3/4”11065 6 Pt. 3/8” Dr. Dp. Skt. 13/16”11066 6 Pt. 3/8” Dr. Dp. Skt. 7/8”11160 6 Pt. 3/8” Dr. Dp. Skt. 10mm11161 6 Pt. 3/8” Dr. Dp. Skt. 11mm11162 6 Pt. 3/8” Dr. Dp. Skt. 12mm11163 6 Pt. 3/8” Dr. Dp. Skt. 13mm11164 6 Pt. 3/8” Dr. Dp. Skt. 14mm11165 6 Pt. 3/8” Dr. Dp. Skt. 15mm11166 6 Pt. 3/8” Dr. Dp. Skt. 16mm11167 6 Pt. 3/8” Dr. Dp. Skt. 17mm11168 6 Pt. 3/8” Dr. Dp. Skt. 18mm11169 6 Pt. 3/8” Dr. Dp. Skt. 19mm11206 12 Pt. 3/8” Dr. Std. Skt. 5/16”11208 12 Pt. 3/8” Dr. Std. Skt. 3/8”11209 12 Pt. 3/8” Dr. Std. Skt. 7/16”11210 12 Pt. 3/8” Dr. Std. Skt. 1/2”11211 12 Pt. 3/8” Dr. Std. Skt. 9/16”11212 12 Pt. 3/8” Dr. Std. Skt. 5/8”11213 12 Pt. 3/8” Dr. Std. Skt. 11/16”11214 12 Pt. 3/8” Dr. Std. Skt. 3/4”11215 12 Pt. 3/8” Dr. Std. Skt. 13/16”11216 12 Pt. 3/8” Dr. Std. Skt. 7/8”11258 12 Pt. 3/8” Dr. Dp. Skt. 3/8”11259 12 Pt. 3/8” Dr. Dp. Skt. 7/16”11260 12 Pt. 3/8” Dr. Dp. Skt. 1/2”11261 12 Pt. 3/8” Dr. Dp. Skt. 9/16”11262 12 Pt. 3/8” Dr. Dp. Skt. 5/8”11263 12 Pt. 3/8” Dr. Dp. Skt. 11/16”11264 12 Pt. 3/8” Dr. Dp. Skt. 3/4”11265 12 Pt. 3/8” Dr. Dp. Skt. 13/16”11266 12 Pt. 3/8” Dr. Dp. Skt. 7/8”11309 12 Pt. 3/8” Dr. Std. Skt. 9mm11310 12 Pt. 3/8” Dr. Std. Skt. 10mm11311 12 Pt. 3/8” Dr. Std. Skt. 11mm11312 12 Pt. 3/8” Dr. Std. Skt. 12mm11313 12 Pt. 3/8” Dr. Std. Skt. 13mm11314 12 Pt. 3/8” Dr. Std. Skt. 14mm11315 12 Pt. 3/8” Dr. Std. Skt. 15mm11316 12 Pt. 3/8” Dr. Std. Skt. 16mm11317 12 Pt. 3/8” Dr. Std. Skt. 17mm11318 12 Pt. 3/8” Dr. Std. Skt. 18mm11319 12 Pt. 3/8” Dr. Std. Skt. 19mm11321 12 Pt. 3/8” Dr. Std. Skt. 21mm11359 12 Pt. 3/8” Dr. Dp. Skt. 9mm11360 12 Pt. 3/8” Dr. Dp. Skt. 10mm11361 12 Pt. 3/8” Dr. Dp. Skt. 11mm11362 12 Pt. 3/8” Dr. Dp. Skt. 12mm11363 12 Pt. 3/8” Dr. Dp. Skt. 13mm11364 12 Pt. 3/8” Dr. Dp. Skt. 14mm11365 12 Pt. 3/8” Dr. Dp. Skt. 15mm

11366 12 Pt. 3/8” Dr. Dp. Skt. 16mm11367 12 Pt. 3/8” Dr. Dp. Skt. 17mm11368 12 Pt. 3/8” Dr. Dp. Skt. 18mm11369 12 Pt. 3/8” Dr. Dp. Skt. 19mm11412 6 Pt. 3/8” Dr. Spark Plug Skt. 5/8”11415 6 Pt. 3/8” Dr. Spark Plug Skt. 13/16”11902 3/8” Dr. Extension 1-1/2”11905 3/8” Dr. Extension 3”11910 3/8” Dr. Extension 6”11913 3/8” Dr. Round Head Ratchet11925 3/8” Dr. 3/8” x 1/2” Inc. Adapter11927 3/8” Dr. 3/8” x 1/4” Red. Adapter11930 3/8” Dr. Universal Joint12107 6 Pt. 3/8” Dr. Std. Skt. 7mm12108 6 Pt. 3/8” Dr. Std. Skt. 8mm12109 6 Pt. 3/8” Dr. Std. Skt. 9mm12110 6 Pt. 3/8” Dr. Std. Skt. 10mm12111 6 Pt. 3/8” Dr. Std. Skt. 11mm12112 6 Pt. 3/8” Dr. Std. Skt. 12mm12113 6 Pt. 3/8” Dr. Std. Skt. 13mm12114 6 Pt. 3/8” Dr. Std. Skt. 14mm12115 6 Pt. 3/8” Dr. Std. Skt. 15mm12116 6 Pt. 3/8” Dr. Std. Skt. 16mm12117 6 Pt. 3/8” Dr. Std. Skt. 17mm12118 6 Pt. 3/8” Dr. Std. Skt. 18mm12119 6 Pt. 3/8” Dr. Std. Skt. 19mm12120 6 Pt. 3/8” Dr. Std. Skt. 20mm12121 6 Pt. 3/8” Dr. Std. Skt. 21mm12122 6 Pt. 3/8” Dr. Std. Skt. 22mm12208 12 Pt. 1/2” Dr. Std. Skt. 3/8”12209 12 Pt. 1/2” Dr. Std. Skt. 7/16”12210 12 Pt. 1/2” Dr. Std. Skt. 1/2”12211 12 Pt. 1/2” Dr. Std. Skt. 9/16”12212 12 Pt. 1/2” Dr. Std. Skt. 5/8”12213 12 Pt. 1/2” Dr. Std. Skt. 11/16”12214 12 Pt. 1/2” Dr. Std. Skt. 3/4”12215 12 Pt. 1/2” Dr. Std. Skt. 13/16”12216 12 Pt. 1/2” Dr. Std. Skt. 7/8”12217 12 Pt. 1/2” Dr. Std. Skt. 15/16”12218 12 Pt. 1/2” Dr. Std. Skt. 1”12219 12 Pt. 1/2” Dr. Std. Skt. 1-1/16”12220 12 Pt. 1/2” Dr. Std. Skt. 1-1/8”12222 12 Pt. 1/2” Dr. Std. Skt. 1-1/4”12260 12 Pt. 1/2” Dr. Dp. Skt. 1/2”12261 12 Pt. 1/2” Dr. Dp. Skt. 9/16”12262 12 Pt. 1/2” Dr. Dp. Skt. 5/8”12263 12 Pt. 1/2” Dr. Dp. Skt. 11/16”12264 12 Pt. 1/2” Dr. Dp. Skt. 3/4”12265 12 Pt. 1/2” Dr. Dp. Skt. 13/16”12266 12 Pt. 1/2” Dr. Dp. Skt. 7/8”12267 12 Pt. 1/2” Dr. Dp. Skt. 15/16”12268 12 Pt. 1/2” Dr. Dp. Skt. 1”12269 12 Pt. 1/2” Dr. Dp. Skt. 1-1/16”12270 12 Pt. 1/2” Dr. Dp. Skt. 1-1/8”12310 12 Pt. 1/2” Dr. Std. Skt. 10mm12311 12 Pt. 1/2” Dr. Std. Skt. 11mm12312 12 Pt. 1/2” Dr. Std. Skt. 12mm12313 12 Pt. 1/2” Dr. Std. Skt. 13mm12314 12 Pt. 1/2” Dr. Std. Skt. 14mm12315 12 Pt. 1/2” Dr. Std. Skt. 15mm

12316 12 Pt. 1/2” Dr. Std. Skt. 16mm12317 12 Pt. 1/2” Dr. Std. Skt. 17mm12318 12 Pt. 1/2” Dr. Std. Skt. 18mm12319 12 Pt. 1/2” Dr. Std. Skt. 19mm12320 12 Pt. 1/2” Dr. Std. Skt. 20mm12321 12 Pt. 1/2” Dr. Std. Skt. 21mm12322 12 Pt. 1/2” Dr. Std. Skt. 22mm12327 12 Pt. 1/2” Dr. Std. Skt. 27mm12330 12 Pt. 1/2” Dr. Std. Skt. 30mm12332 12 Pt. 1/2” Dr. Std. Skt. 32mm12412 6 Pt. 1/2” Dr. Spark Plug Skt. 5/8”12415 6 Pt. 1/2” Dr. Spark Plug Skt. 13/16”12805 1/2” Dr. Extension 3”12811 1/2” Dr. Round Head Ratchet20204 12 Pt. Combo. Wr. 1/4”20206 12 Pt. Combo. Wr. 5/16”20208 12 Pt. Combo. Wr. 3/8”20209 12 Pt. Combo. Wr. 7/16”20210 12 Pt. Combo. Wr. 1/2”20211 12 Pt. Combo. Wr. 9/16”20212 12 Pt. Combo. Wr. 5/8”20214 12 Pt. Combo. Wr. 3/4”20307 12 Pt. Combo. Wr. 7mm20308 12 Pt. Combo. Wr. 8mm20309 12 Pt. Combo. Wr. 9mm20310 12 Pt. Combo. Wr. 10mm20311 12 Pt. Combo. Wr. 11mm20312 12 Pt. Combo. Wr. 12mm20313 12 Pt. Combo. Wr. 13mm20314 12 Pt. Combo. Wr. 14mm20315 12 Pt. Combo. Wr. 15mm20316 12 Pt. Combo. Wr. 16mm20317 12 Pt. Combo. Wr. 17mm20319 12 Pt. Combo. Wr. 19mm30802 Solid Shaft Nut Driver 3/16”30804 Solid Shaft Nut Driver 1/4”30806 Solid Shaft Nut Driver 5/16”30807 Solid Shaft Nut Driver 11/32”30808 Solid Shaft Nut Driver 3/8”30809 Solid Shaft Nut Driver 7/16”30810 Solid Shaft Nut Driver 1/2”30833 3/16” x 3” Cabinet Tip Screwdriver30836 #1 x 3” Phillips Screwdriver30837 #2 x 4” Phillips Screwdriver30838 #3 x 6” Phillips Screwdriver30839 1/4” x 4” Round Blade Screwdriver30841 5/16” x 6” Round Blade Screwdriver30844 1/4” x 1-1/2” Stubby Screwdriver30845 #2 x 1-1/2” Stubby Phillips

Screwdriver57006 Short Arm Hex Key .050”57008 Short Arm Hex Key 1/16”57010 Short Arm Hex Key 5/64”57012 Short Arm Hex Key 3/32”57014 Short Arm Hex Key 1/8”57020 Short Arm Hex Key 5/32”57022 Short Arm Hex Key 3/16”57024 Short Arm Hex Key 7/32”57026 Short Arm Hex Key 1/4”57028 Short Arm Hex Key 5/16”

57030 Short Arm Hex Key 3/8”57116 Short Arm Hex Key 1.5mm57118 Short Arm Hex Key 2mm57120 Short Arm Hex Key 2.5mm57122 Short Arm Hex Key 3mm57124 Short Arm Hex Key 4mm57126 Short Arm Hex Key 5mm57128 Short Arm Hex Key 6mm57130 Short Arm Hex Key 8mm57132 Short Arm Hex Key 10mm57982 Short Arm Torx Key T-757983 Short Arm Torx Key T-857984 Short Arm Torx Key T-957985 Short Arm Torx Key T-1057986 Short Arm Torx Key T-1557987 Short Arm Torx Key T-2057988 Short Arm Torx Key T-2557989 Short Arm Torx Key T-2757990 Short Arm Torx Key T-3057991 Short Arm Torx Key T-4057992 Short Arm Torx Key T-4557993 Short Arm Torx Key T-5057994 Short Arm Torx Key T-5558676 3/8” Dr. Hex Bit Skt. 3mm58678 3/8” Dr. Hex Bit Skt. 4mm58680 3/8” Dr. Hex Bit Skt. 5mm58682 3/8” Dr. Hex Bit Skt. 6mm58684 3/8” Dr. Hex Bit Skt. 8mm58686 3/8” Dr. Hex Bit Skt. 10mm58802 3/8” Dr. Hex Bit Skt. 1/8”58806 3/8” Dr. Hex Bit Skt. 5/32”58808 3/8” Dr. Hex Bit Skt. 3/16”58810 3/8” Dr. Hex Bit Skt. 7/32”58812 3/8” Dr. Hex Bit Skt. 1/4”58814 3/8” Dr. Hex Bit Skt. 5/16”58815 3/8” Dr. Hex Bit Skt. 3/8”66030 6 Pt. Midget Combo. Wr. 5/32”66032 6 Pt. Midget Combo. Wr. 3/16”66034 6 Pt. Midget Combo. Wr. 13/64”66036 6 Pt. Midget Combo. Wr. 7/32”66038 6 Pt. Midget Combo. Wr. 15/64”66040 6 Pt. Midget Combo. Wr. 1/4”66042 6 Pt. Midget Combo. Wr. 9/32”66044 6 Pt. Midget Combo. Wr. 5/16”66046 6 Pt. Midget Combo. Wr. 3/8”66048 6 Pt. Midget Combo. Wr. 7/16”66430 6 Pt. Midget Combo. Wr. 4mm66432 6 Pt. Midget Combo. Wr. 4.5mm66434 6 Pt. Midget Combo. Wr. 5mm66436 6 Pt. Midget Combo. Wr. 5.5mm66438 6 Pt. Midget Combo. Wr. 6mm66440 6 Pt. Midget Combo. Wr. 7mm66442 6 Pt. Midget Combo. Wr. 8mm66446 6 Pt. Midget Combo. Wr. 9mm66448 6 Pt. Midget Combo. Wr. 10mm66450 6 Pt. Midget Combo. Wr. 11mm419020C 5 Pc. Quick Change Screwdriver

Approx. Wt. 43 lbs.


■ Item Number: 19603 (contains one each of the following:)

300 Piece Fractional/Metric Mechanic’s Set (1/4", 3/8" & 1/2" Drives)

180


10022 6 Pt. 1/4" Dr. Std. Skt. 3/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2"10054 6 Pt. 1/4" Dr. Dp. Skt. 1/4"10055 6 Pt. 1/4" Dr. Dp. Skt. 9/32"10056 6 Pt. 1/4" Dr. Dp. Skt. 5/16"10057 6 Pt. 1/4" Dr. Dp. Skt. 11/32"10058 6 Pt. 1/4" Dr. Dp. Skt. 3/8"10059 6 Pt. 1/4" Dr. Dp. Skt. 7/16"10060 6 Pt. 1/4" Dr. Dp. Skt. 1/2"10900 1/4" Dr. Ratchet Teardrop-Q.R.10902 1/4" Dr. Extension 1-1/2"10910 1/4" Dr. Extension 6"10915 1/4" Dr. Spinner Handle10920 1/4" Dr. Flex Handle10925 1/4" Dr. Adapter 1/4" X 3/8"10930 1/4" Dr. Universal Joint11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11508 6 Pt. 3/8" Dr. Universal Skt. 3/8"11509 6 Pt. 3/8" Dr. Universal Skt. 7/16"11510 6 Pt. 3/8" Dr. Universal Skt. 1/2"11511 6 Pt. 3/8" Dr. Universal Skt. 9/16"11512 6 Pt. 3/8" Dr. Universal Skt. 5/8"11513 6 Pt. 3/8" Dr. Universal Skt. 11/16"11514 6 Pt. 3/8" Dr. Universal Skt. 3/4"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11920 3/8" Dr. Flex Handle11925 3/8" Dr. Adapter 3/8" X 1/2"11926 3/8" Dr. Speeder Handle11927 3/8" Dr. Adapter 3/8" X 1/4"11930 3/8" Dr. Universal Joint12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"

12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12800 1/2" Dr. Ratchet Teardrop-Q.R.12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint20204 12 Pt. Combo. Wr. 1/4"20206 12 Pt. Combo. Wr. 5/16"20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"20550 3/8" Dr. Crowfoot Wr. 3/8"20552 3/8" Dr. Crowfoot Wr. 7/16"20553 3/8" Dr. Crowfoot Wr. 1/2"20554 3/8" Dr. Crowfoot Wr. 9/16"20555 3/8" Dr. Crowfoot Wr. 5/8"20556 3/8" Dr. Crowfoot Wr. 11/16"20557 3/8" Dr. Crowfoot Wr. 3/4"20558 3/8" Dr. Crowfoot Wr. 13/16"20559 3/8" Dr. Crowfoot Wr. 7/8"20564 3/8" Dr. Crowfoot Wr. 1"21004 15D Angle Open End Wr. 1/4"X5/16"21005 15D Angle Open End Wr. 5/16"X3/8"21009 15D Angle Open End Wr. 7/16"X1/2"21010 15D Angle Open End Wr. 1/2"X9/16"21011 15D Angle Open End Wr. 9/16"X5/8"21012 15D Angle Open End Wr. 5/8"X3/4"21013 15D Angle Open End Wr.

11/16"X13/16"21014 15D Angle Open End Wr. 3/4"X7/8"21017 15D Angle Open End Wr. 15/16"X1"21019 15D Angle Open End Wr.

1-1/16"X1-1/8"21404 6 Pt. Dbl. End Flare Nut Wr.



5/8"X11/16"22208 12 Pt. Offset Box Wr. 3/8"X7/16"22210 12 Pt. Offset Box Wr. 1/2"X9/16"22212 12 Pt. Offset Box Wr. 5/8"X3/4"22213 12 Pt. Offset Box Wr. 11/16"X13/16"22214 12 Pt. Offset Box Wr. 3/4"X7/8"22604 Ratcheting Box End Wr. 1/4"X5/16"22608 Ratcheting Box End Wr. 3/8"X7/16"22610 Ratcheting Box End Wr. 1/2"X9/16"22612 Ratcheting Box End Wr. 5/8"X11/16"22614 Ratcheting Box End Wr. 3/4"X7/8"24004 Adj. Wr. 4"24006 Adj. Wr. 6"24008 Adj. Wr. 8"24010 Adj. Wr. 10"24012 Adj. Wr. 12"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25310 Rib Lock Pliers 10"25406 Diagonal Cutting Pliers 6"25624 Pin Punch, Cut 3/32", Hex 5/16",






Long 4-1/2"25642 Solid Punch, Cut 1/4", Hex 3/8",

Long 5"25647 Center Punch, Hex 3/8", Long 5"25651 Cold Chisel, Cut 3/8", Hex 5/16",




Long 7-1/2"25668 Pinch Bars Long 16"25702 8 Oz. 12-1/4" Ball Pein Hammer25704 16 Oz. 14-1/4" Ball Pein Hammer25716 12 Oz. 11-5/8 Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30835 #0 X 2 1/2" Phillips Screwdriver

w/ Clip30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver

30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30843 3/8" X 8" Square Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver57002 .028" Short Arm Hex Key57004 .035" Short Arm Hex Key57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57013 7/64" Short Arm Hex Key57014 1/8" Short Arm Hex Key57018 9/64" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key57100 3/16" Hollow Shaft Nut Driver57102 1/4" Hollow Shaft Nut Driver57104 5/16" Hollow Shaft Nut Driver57106 11/32" Hollow Shaft Nut Driver57108 3/8" Hollow Shaft Nut Driver57110 7/16" Hollow Shaft Nut Driver57112 1/2" Hollow Shaft Nut Driver58800 3/8" Dr. Hex Bit Skt. 7/64"58802 3/8" Dr. Hex Bit Skt. 1/8"58804 3/8" Dr. Hex Bit Skt. 9/64"58806 3/8" Dr. Hex Bit Skt. 5/32"58808 3/8" Dr. Hex Bit Skt. 3/16"58810 3/8" Dr. Hex Bit Skt. 7/32"58812 3/8" Dr. Hex Bit Skt. 1/4"58814 3/8" Dr. Hex Bit Skt. 5/16"58815 3/8" Dr. Hex Bit Skt. 3/8"61015 Challenger Hacksaw61231 Bimetal 12" 24 Teeth Hacksaw

Blades61232 Bimetal 12" 32 Teeth Hacksaw

Blades66030 6 Pt. Midget Combo. Wr. 5/32"66032 6 Pt. Midget Combo. Wr. 3/16"66034 12 Pt. Midget Combo. Wr. 13/64"66036 12 Pt. Midget Combo. Wr. 7/32"66038 12 Pt. Midget Combo. Wr. 15/64"66040 12 Pt. Midget Combo. Wr. 1/4"66042 12 Pt. Midget Combo. Wr. 9/32"66046 12 Pt. Midget Combo. Wr. 5/16"66048 12 Pt. Midget Combo. Wr. 3/8"66050 12 Pt. Midget Combo. Wr. 7/16"66114 Midget Open End Wr. 7/32"66115 Midget Open End Wr. 15/64"66116 Midget Open End Wr. 1/4"

66118 Midget Open End Wr. 9/32"66120 Midget Open End Wr. 5/16"66122 Midget Open End Wr. 11/32"66124 Midget Open End Wr. 3/8"66128 Midget Open End Wr. 7/16"161 Deluxe Feeler Gauge165 Spark Plug Gap Wire Gauge2162 Electric Wire Stripper & Crimper2282 Slotted Screw Starter2283 Phillips Screw Starter3151 Large Convertible Snap Ring Pliers485 Gasket Scraper2108 Telescoping Mirror2281 Telescoping Magnetic Retrieving

Tool2844 Flexible Retrieving Tool3121 Hook and Pick Set3264 3/8" Dr Micrometer Torque Wrench3265 1/2" Dr Micrometer Torque Wrench23 100C Left Cutting, Aviation Snip23 101C Straight Cutting, Aviation Snip23 102C Right Cutting, Aviation Snip41 4101 #1 Phillips Bit Skt. HD 1/4" Dr.41 4102 #2 Phillips Bit Skt. HD 1/4" Dr.41 4115 4-5 Slotted Bit Skt. HD 1/4" Dr.41 4116 8-10 Slotted Bit Skt. HD 1/4" Dr.81 601 Replacement Tip for 81600 (Hard)81 602 Replacement Tip for 81600 (Soft)3009 Tape Measure2054 Safety Goggles2425 Putty Knife2522 Steel Rule 6"2969 Machinist’s Square 12" Rule19804 Roller Cabinet, 7 drawer

Approx. Wt.19632: 268 lbs.19631: 89 lbs.19804: 175 lbs.


■ Item Number: 19632 with No.19804 Roller Cabinet ■ Item Number: 19631 Tools Only - 225 pcs. (contains one each of the following:)

226 Piece Master Aircraft/Avionics Set (1/4", 3/8" & 1/2" Drives)

181


10022 6 Pt. 1/4" Dr. Std. Skt. 3/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2"10054 6 Pt. 1/4" Dr. Dp. Skt. 1/4"10055 6 Pt. 1/4" Dr. Dp. Skt. 9/32"10056 6 Pt. 1/4" Dr. Dp. Skt. 5/16"10057 6 Pt. 1/4" Dr. Dp. Skt. 11/32"10058 6 Pt. 1/4" Dr. Dp. Skt. 3/8"10059 6 Pt. 1/4" Dr. Dp. Skt. 7/16"10060 6 Pt. 1/4" Dr. Dp. Skt. 1/2"10900 1/4" Dr. Ratchet Teardrop-Q.R.10902 1/4" Dr. Extension 1-1/2"10910 1/4" Dr. Extension 6"10915 1/4" Dr. Spinner Handle10920 1/4" Dr. Flex Handle10930 1/4" Dr. Universal Joint11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11215 12 Pt. 3/8" Dr. Std. Skt. 13/16"11216 12 Pt. 3/8" Dr. Std. Skt. 7/8"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11265 12 Pt. 3/8" Dr. Dp. Skt. 13/16"11266 12 Pt. 3/8" Dr. Dp. Skt. 7/8"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11508 6 Pt. 3/8" Dr. Universal Skt. 3/8"11509 6 Pt. 3/8" Dr. Universal Skt. 7/16"11510 6 Pt. 3/8" Dr. Universal Skt. 1/2"11511 6 Pt. 3/8" Dr. Universal Skt. 9/16"11512 6 Pt. 3/8" Dr. Universal Skt. 5/8"11513 6 Pt. 3/8" Dr. Universal Skt. 11/16"11514 6 Pt. 3/8" Dr. Universal Skt. 3/4"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint

12208 12 Pt. 1/2" Dr. Std. Skt. 3/8"12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint20204 12 Pt. Combo. Wr. 1/4"20206 12 Pt. Combo. Wr. 5/16"20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"21004 15D Angle Open End Wr. 1/4"X5/16"21005 15D Angle Open End Wr. 5/16"X3/8"21009 15D Angle Open End Wr. 7/16"X1/2"21010 15D Angle Open End Wr. 1/2"X9/16"21011 15D Angle Open End Wr. 9/16"X5/8"21012 15D Angle Open End Wr. 5/8"X3/4"21013 15D Angle Open End Wr.


1-1/8"24006 Adj. Wr. 6"24008 Adj. Wr. 8"24010 Adj. Wr. 10"25106 Slip Joint Pliers 6"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy

Duty25208 Linesman Pliers 8"25310 Rib Lock Pliers 10"25406 Diagonal Cutting Pliers 6"25624 Pin Punch, Cut 3/32", Hex 5/16",











Long 4-1/2"25640 Solid Punch Cut 5/32", Hex 3/8",





Long 8"25645 Prick Punch, Hex 3/8", Long 5"25647 Center Punch, Hex 3/8", Long 5"25648 Center Punch, Hex 1/2", Long 6"25651 Cold Chisel, Cut 3/8", Hex 5/16",


Long 5-1/2"



25655 Cold Chisel, Cut 3/4", Hex 5/8", Long 7"


25657 Cold Chisel Cut 1, Hex 7/8", Long 8"25664 Lg. Cold Chisel, Cut 3/4", Hex 5/8",

Long 12"25668 Pinch Bars Long 16"25670 Roll Bar Hex 1/2" Long 15"25704 16 Oz. 14-1/4" Ball Pein Hammer25707 32 Oz. 16" Ball Pein Hammer25716 2 Oz. 11-5/8" Soft Face Hammer30802 Solid Shaft Nut Driver 3/16"30804 Solid Shaft Nut Driver 1/4"30806 Solid Shaft Nut Driver 5/16"30807 Solid Shaft Nut Driver 11/32"30808 Solid Shaft Nut Driver 3/8"30809 Solid Shaft Nut Driver 7/16"30810 Solid Shaft Nut Driver 1/2"30833 3/16" X 3" Cabinet Tip Screwdriver30835 #0 X 2 1/2" Phillips Screwdriver


Screwdriver57002 .028" Short Arm Hex Key57004 .035" Short Arm Hex Key57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57013 7/64" Short Arm Hex Key57014 1/8" Short Arm Hex Key57018 9/64" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key57032 1/2" Short Arm Hex Key57034 9/16" Short Arm Hex Key57036 5/8" Short Arm Hex Key58800 3/8" Dr. Hex Bit Skt. 7/64"58802 3/8" Dr. Hex Bit Skt. 1/8"

58804 3/8" Dr. Hex Bit Skt. 9/64"58806 3/8" Dr. Hex Bit Skt. 5/32"58808 3/8" Dr. Hex Bit Skt. 3/16"58810 3/8" Dr. Hex Bit Skt. 7/32"58812 3/8" Dr. Hex Bit Skt. 1/4"58814 3/8" Dr. Hex Bit Skt. 5/16"58815 3/8" Dr. Hex Bit Skt. 3/8"58836 1/2" Dr. Hex Bit Skt. 1/4"58838 1/2" Dr. Hex Bit Skt. 5/16"58840 1/2" Dr. Hex Bit Skt. 3/8"58842 1/2" Dr. Hex Bit Skt. 7/16"58844 1/2" Dr. Hex Bit Skt. 1/2"58846 1/2" Dr. Hex Bit Skt. 9/16"58848 1/2" Dr. Hex Bit Skt. 5/8"61015 Challenger Hacksaw66030 6 Pt. Midget Combo. Wr. 5/32"66032 6 Pt. Midget Combo. Wr. 3/16"66034 12 Pt. Midget Combo. Wr. 13/64"66036 12 Pt. Midget Combo. Wr. 7/32"66038 12 Pt. Midget Combo. Wr. 15/64"66040 12 Pt. Midget Combo. Wr. 1/4"66042 12 Pt. Midget Combo. Wr. 9/32"66044 12 Pt. Midget Combo. Wr. 5/16"66046 12 Pt. Midget Combo. Wr. 3/8"66048 12 Pt. Midget Combo. Wr. 7/16"66114 Midget Open End Wr. 7/32"66115 Midget Open End Wr. 15/64"66116 Midget Open End Wr. 1/4"66118 Midget Open End Wr. 9/32"66120 Midget Open End Wr. 5/16"66122 Midget Open End Wr. 11/32"66124 Midget Open End Wr. 3/8"66128 Midget Open End Wr. 7/16"19804 Roller Cabinet, 7 drawer



226 Piece Advanced Industrial Mechanic’s Set (1/4", 3/8" & 1/2" Drives)

182


10102 6 Pt. 1/4" Dr. Std. Skt. 4mm10104 6 Pt. 1/4" Dr. Std. Skt. 5mm10106 6 Pt. 1/4" Dr. Std. Skt. 6mm10107 6 Pt. 1/4" Dr. Std. Skt. 7mm10108 6 Pt. 1/4" Dr. Std. Skt. 8mm10109 6 Pt. 1/4" Dr. Std. Skt. 9mm10110 6 Pt. 1/4" Dr. Std. Skt. 10mm10111 6 Pt. 1/4" Dr. Std. Skt. 11mm10112 6 Pt. 1/4" Dr. Std. Skt. 12mm10156 6 Pt. 1/4" Dr. Dp. Skt. 6mm10157 6 Pt. 1/4" Dr. Dp. Skt. 7mm10158 6 Pt. 1/4" Dr. Dp. Skt. 8mm10159 6 Pt. 1/4" Dr. Dp. Skt. 9mm10160 6 Pt. 1/4" Dr. Dp. Skt. 10mm10161 6 Pt. 1/4" Dr. Dp. Skt. 11mm10162 6 Pt. 1/4" Dr. Dp. Skt. 12mm10900 1/4" Dr. Ratchet Teardrop-Q.R.10902 1/4" Dr. Extension 1-1/2"10905 1/4" Dr. Extension 3"10910 1/4" Dr. Extension 6"10915 1/4" Dr. Spinner Handle10930 1/4" Dr. Universal Joint11310 12 Pt. 3/8" Dr. Std. Skt. 10mm11311 12 Pt. 3/8" Dr. Std. Skt. 11mm11312 12 Pt. 3/8" Dr. Std. Skt. 12mm11313 12 Pt. 3/8" Dr. Std. Skt. 13mm11314 12 Pt. 3/8" Dr. Std. Skt. 14mm11315 12 Pt. 3/8" Dr. Std. Skt. 15mm11316 12 Pt. 3/8" Dr. Std. Skt. 16mm11317 12 Pt. 3/8" Dr. Std. Skt. 17mm11318 12 Pt. 3/8" Dr. Std. Skt. 18mm11319 12 Pt. 3/8" Dr. Std. Skt. 19mm11360 12 Pt. 3/8" Dr. Dp. Skt. 10mm11361 12 Pt. 3/8" Dr. Dp. Skt. 11mm11362 12 Pt. 3/8" Dr. Dp. Skt. 12mm11363 12 Pt. 3/8" Dr. Dp. Skt. 13mm11364 12 Pt. 3/8" Dr. Dp. Skt. 14mm11365 12 Pt. 3/8" Dr. Dp. Skt. 15mm11367 12 Pt. 3/8" Dr. Dp. Skt. 17mm11369 12 Pt. 3/8" Dr. Dp. Skt. 19mm11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint

12309 12 Pt. 1/2" Dr. Std. Skt. 9mm12310 12 Pt. 1/2" Dr. Std. Skt. 10mm12311 12 Pt. 1/2" Dr. Std. Skt. 11mm12312 12 Pt. 1/2" Dr. Std. Skt. 12mm12313 12 Pt. 1/2" Dr. Std. Skt. 13mm12314 12 Pt. 1/2" Dr. Std. Skt. 14mm12315 12 Pt. 1/2" Dr. Std. Skt. 15mm12316 12 Pt. 1/2" Dr. Std. Skt. 16mm12317 12 Pt. 1/2" Dr. Std. Skt. 17mm12318 12 Pt. 1/2" Dr. Std. Skt. 18mm12319 12 Pt. 1/2" Dr. Std. Skt. 19mm12320 12 Pt. 1/2" Dr. Std. Skt. 20mm12321 12 Pt. 1/2" Dr. Std. Skt. 21mm12322 12 Pt. 1/2" Dr. Std. Skt. 22mm12323 12 Pt. 1/2" Dr. Std. Skt. 23mm12324 12 Pt. 1/2" Dr. Std. Skt. 24mm12327 12 Pt. 1/2" Dr. Std. Skt. 27mm12330 12 Pt. 1/2" Dr. Std. Skt. 30mm12332 12 Pt. 1/2" Dr. Std. Skt. 32mm12800 1/2" Dr. Ratchet Teardrop-Q.R.12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint20307 12 Pt. Combo. Wr. 7mm20308 12 Pt. Combo. Wr. 8mm20309 12 Pt. Combo. Wr. 9mm20310 12 Pt. Combo. Wr. 10mm20311 12 Pt. Combo. Wr. 11mm20312 12 Pt. Combo. Wr. 12mm20313 12 Pt. Combo. Wr. 13mm20314 12 Pt. Combo. Wr. 14mm20315 12 Pt. Combo. Wr. 15mm20316 12 Pt. Combo. Wr. 16mm20317 12 Pt. Combo. Wr. 17mm20318 12 Pt. Combo. Wr. 18mm20319 12 Pt. Combo. Wr. 19mm20321 12 Pt. Combo. Wr. 21mm20322 12 Pt. Combo. Wr. 22mm20565 3/8" Dr. Crowfoot Wr. 10mm20570 3/8" Dr. Crowfoot Wr. 11mm20571 3/8" Dr. Crowfoot Wr. 12mm20572 3/8" Dr. Crowfoot Wr. 13mm20573 3/8" Dr. Crowfoot Wr. 14mm20574 3/8" Dr. Crowfoot Wr. 15mm

20575 3/8" Dr. Crowfoot Wr. 16mm20576 3/8" Dr. Crowfoot Wr. 17mm20577 3/8" Dr. Crowfoot Wr. 18mm20578 3/8" Dr. Crowfoot Wr. 19mm21106 15D Angle Open End Wr. 6X8mm21107 15D Angle Open End Wr. 7X9mm21110 15D Angle Open End Wr. 10X11mm21112 15D Angle Open End Wr. 12X14mm21113 15D Angle Open End Wr. 13X15mm21117 15D Angle Open End Wr. 17X19mm21511 6 Pt. Dbl. End Flare Nut Wr.



15X17mm24006 Adj. Wr. 6"24008 Adj. Wr. 8"24010 Adj. Wr. 10"24012 Adj. Wr. 12"25106 Slip Joint Pliers 6"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy

Duty25310 Rib Lock Pliers 10"25316 Rib Lock Pliers 16"25624 Pin Punch, Cut 3/32", Hex 5/16",



Long 5-1/2"25628 Pin Punch, Cut 1/4", Hex 3/8", Long

7"25633 Lg. Taper Punch, Cut 3/16", Hex





Long 6"



25668 Pinch Bars Long 16"25670 Roll Bar Hex 1/2", Long 15"25702 8 Oz. 12-1/4" Ball Pein Hammer25704 16 Oz. 14-1/4" Ball Pein Hammer25707 32 Oz. 16" Ball Pein Hammer25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver30854 Solid Shaft Nut Driver 5mm30856 Solid Shaft Nut Driver 6mm30857 Solid Shaft Nut Driver 7mm30858 Solid Shaft Nut Driver 8mm30859 Solid Shaft Nut Driver 9mm30860 Solid Shaft Nut Driver 10mm30861 Solid Shaft Nut Driver 11mm58048 0.9mm Long Arm Hex Key58049 1.3mm Long Arm Hex Key58050 1.5mm Long Arm Hex Key58052 2mm Long Arm Hex Key58054 2.5mm Long Arm Hex Key58056 3mm Long Arm Hex Key58058 4mm Long Arm Hex Key58060 5mm Long Arm Hex Key58062 6mm Long Arm Hex Key58064 8mm Long Arm Hex Key58066 10mm Long Arm Hex Key58068 12mm Long Arm Hex Key58090 14mm Long Arm Hex Key58092 17mm Long Arm Hex Key58094 19mm Long Arm Hex Key58672 3/8" Dr. Hex Bit Skt. 2mm58674 3/8" Dr. Hex Bit Skt. 2.5mm58676 3/8" Dr. Hex Bit Skt. 3mm58678 3/8" Dr. Hex Bit Skt. 4mm58680 3/8" Dr. Hex Bit Skt. 5mm

58682 3/8" Dr. Hex Bit Skt. 6mm58684 3/8" Dr. Hex Bit Skt. 8mm58686 3/8" Dr. Hex Bit Skt. 10mm61010 Adj. Hacksaw66430 6 Pt. Midget Combo. Wr. 4mm66432 6 Pt. Midget Combo. Wr. 4.5mm66434 12 Pt. Midget Combo. Wr. 5mm66436 12 Pt. Midget Combo. Wr. 5.5mm66438 12 Pt. Midget Combo. Wr. 6mm66440 12 Pt. Midget Combo. Wr. 7mm66442 12 Pt. Midget Combo. Wr. 8mm66444 12 Pt. Midget Combo. Wr. 9mm66446 12 Pt. Midget Combo. Wr. 10mm66448 12 Pt. Midget Combo. Wr. 11mm161 Deluxe Feeler Gauge1708 Stud Extractor485 Gasket Scraper2108 Telescoping Mirror2281 Telescoping Magnetic Retrieving



1/2" Dr.23 101C Straight Cutting, Aviation Snip31 200C Heavy Duty Retractable Utility

Knife81 601 Replacement Tip for 81600 (Hard)81 602 Replacement Tip for 81600 (Soft)1109 Screw Extractor 1/8"1110 Screw Extractor 3/16"1111 Screw Extractor 15/64"1112 Screw Extractor 5/16"1113 Screw Extractor 3/8"19805 Top Chest, 6 drawer


■ Item Number: 19628 with No.19805 Top Chest ■ Item Number: 19627 Tools Only - 198 pcs. (contains one each of the following:)

199 Piece Metric Master Mechanic’s Repair Set (1/4",3/8" & 1/2" Drives)

11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11916 3/8" Dr. Locking Extension 5"11917 3/8" Dr. Locking Extension 8"11918 3/8" Dr. Locking Extension 12"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"

12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint13203 12 Pt. 3/4" Dr. Std. Skt. 15/16"13204 12 Pt. 3/4" Dr. Std. Skt. 1"13205 12 Pt. 3/4" Dr. Std. Skt. 1-1/16"13206 12 Pt. 3/4" Dr. Std. Skt. 1-1/8"13207 12 Pt. 3/4" Dr. Std. Skt. 1-3/16"13208 12 Pt. 3/4" Dr. Std. Skt. 1-1/4"13209 12 Pt. 3/4" Dr. Std. Skt. 1-5/16"13210 12 Pt. 3/4" Dr. Std. Skt. 1-3/8"13211 12 Pt. 3/4" Dr. Std. Skt. 1-7/16"13212 12 Pt. 3/4" Dr. Std. Skt. 1-1/2"13213 12 Pt. 3/4" Dr. Std. Skt. 1-9/16"13214 12 Pt. 3/4" Dr. Std. Skt. 1-5/8"13215 12 Pt. 3/4" Dr. Std. Skt. 1-11/16"13216 12 Pt. 3/4" Dr. Std. Skt. 1-3/4"13217 12 Pt. 3/4" Dr. Std. Skt. 1-13/16"13218 12 Pt. 3/4" Dr. Std. Skt. 1-7/8"13220 12 Pt. 3/4" Dr. Std. Skt. 2"13900 3/4" Dr. Ratchet Teardrop-Q.R.13910 3/4" Dr. Extension 5"13912 3/4" Dr. Extension 8"13914 3/4" Dr. Extension 16"13920 3/4" Dr. Flex Handle13922 3/4" Dr. Sliding T Handle13927 3/4" Dr. Adapter 3/4" X 1/2"13929 3/4" Dr. Universal Joint20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"

20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"20223 12 Pt. Combo. Wr. 1-5/16"20224 12 Pt. Combo. Wr. 1-3/8"20225 12 Pt. Combo. Wr. 1-7/16"20226 12 Pt. Combo. Wr. 1-1/2"20550 3/8" Dr. Crowfoot Wr. 3/8"20552 3/8" Dr. Crowfoot Wr. 7/16"20553 3/8" Dr. Crowfoot Wr. 1/2"20554 3/8" Dr. Crowfoot Wr. 9/16"20555 3/8" Dr. Crowfoot Wr. 5/8"20556 3/8" Dr. Crowfoot Wr. 11/16"20557 3/8" Dr. Crowfoot Wr. 3/4"20558 3/8" Dr. Crowfoot Wr. 13/16"20559 3/8" Dr. Crowfoot Wr. 7/8"20564 3/8" Dr. Crowfoot Wr. 1"21404 6 Pt. Dbl. End Flare Nut Wr.



5/8"X11/16"22208 12 Pt. Offset Box Wr. 3/8"X7/16"22210 12 Pt. Offset Box Wr. 1/2"X9/16"22212 12 Pt. Offset Box Wr. 5/8"X3/4"22213 12 Pt. Offset Box Wr. 11/16"X13/16"22214 12 Pt. Offset Box Wr. 3/4"X7/8"22604 Ratcheting Box End Wr. 1/4"X5/16"22608 Ratcheting Box End Wr. 3/8"X7/16"22610 Ratcheting Box End Wr. 1/2"X9/16"22612 Ratcheting Box End Wr. 5/8"X11/16"24006 Adj. Wr. 6"24010 Adj. Wr. 10"

24012 Adj. Wr. 12"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy


Long 5-1/2"25634 Lg. Taper Punch, Cut 1/4", Hex 5/8",




Long 6-1/2"25702 8 Oz. 12-1/4" Ball Pein Hammer25704 16 Oz. 14-1/4" Ball Pein Hammer25712 3 Lb. 10" Drilling Hammer25714 20 Oz. Rubber Mallet25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57014 1/8" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key

57030 3/8" Short Arm Hex Key57100 3/16" Hollow Shaft Nut Driver57102 1/4" Hollow Shaft Nut Driver57104 5/16" Hollow Shaft Nut Driver57106 11/32" Hollow Shaft Nut Driver57108 3/8" Hollow Shaft Nut Driver57110 7/16" Hollow Shaft Nut Driver57112 1/2" Hollow Shaft Nut Driver161 Deluxe Feeler Gauge2162 Elec. Wire Stripper & Crimper2297 7" 3-Jaw Puller1708 Stud Extractor2534 Lock Ring Pliers3151 Large Convertible Snap Ring Pliers485 Gasket Scraper2108 Telescoping Mirror2281 Telescoping Magnetic Retrieving



1/2" Dr.23 101C Straight Cutting, Aviation Snip23 104 10" Straight Cutting Snip31 200C Heavy Duty Retractable Utility Knife72 1713 3/8" Dr.. 11/16" Drag Link Skt.81 601 Replacement Tip for 81600 (Hard)81 602 Replacement Tip for 81600 (Soft)3009 Tape Measure1109 Screw Extractor 1/8"1110 Screw Extractor 3/16"1111 Screw Extractor 15/64"1112 Screw Extractor 5/16"1113 Screw Extractor 3/8"19804 Roller Cabinet, 7 drawer




181 Piece Industrial Mechanic’s Repair Set (3/8", 1/2" & 3/4" Drives)

183


10022 6 Pt. 1/4" Dr. Std. Skt. 3/16"10023 6 Pt. 1/4" Dr. Std. Skt. 7/32"10024 6 Pt. 1/4" Dr. Std. Skt. 1/4"10025 6 Pt. 1/4" Dr. Std. Skt. 9/32"10026 6 Pt. 1/4" Dr. Std. Skt. 5/16"10027 6 Pt. 1/4" Dr. Std. Skt. 11/32"10028 6 Pt. 1/4" Dr. Std. Skt. 3/8"10029 6 Pt. 1/4" Dr. Std. Skt. 7/16"10030 6 Pt. 1/4" Dr. Std. Skt. 1/2"10054 6 Pt. 1/4" Dr. Dp. Skt. 1/4"10055 6 Pt. 1/4" Dr. Dp. Skt. 9/32"10056 6 Pt. 1/4" Dr. Dp. Skt. 5/16"10057 6 Pt. 1/4" Dr. Dp. Skt. 11/32"10058 6 Pt. 1/4" Dr. Dp. Skt. 3/8"10059 6 Pt. 1/4" Dr. Dp. Skt. 7/16"10060 6 Pt. 1/4" Dr. Dp. Skt. 1/2"10900 1/4" Dr. Ratchet Teardrop-Q.R.10902 1/4" Dr. Extension 1-1/2"10910 1/4" Dr. Extension 6"10915 1/4" Dr. Spinner Handle10920 1/4" Dr. Flex Handle10930 1/4" Dr. Universal Joint11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"

11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint12029 6 Pt. 1/2" Dr. Std. Skt. 7/16"12030 6 Pt. 1/2" Dr. Std. Skt. 1/2"12031 6 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"

12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"21404 6 Pt. Dbl. End Flare Nut Wr.



5/8"X11/16"24008 Adj. Wr. 8"24012 Adj. Wr. 12"

25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy

Duty25208 Linesman Pliers 8"25310 Rib Lock Pliers 10"25624 Pin Punch, Cut 3/32", Hex 5/16",











Long 7-1/2"25704 16 Oz. 14-1/4" Ball Pein Hammer25716 12 Oz. 11-5/8" Soft Face Hammer

30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade

Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver57002 .028" Short Arm Hex Key57004 .035" Short Arm Hex Key57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57013 7/64" Short Arm Hex Key57014 1/8" Short Arm Hex Key57018 9/64" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key19805 Top Chest, 6 drawer


■ Item Number: 19616 with No.19803 20" Tool Box ■ Item Number: 19615 Tools Only - 100 pcs. (contains one each of the following:)

11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"

12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"

12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"24006 Adj. Wr. 6"24010 Adj. Wr. 10"


Duty25310 Rib Lock Pliers 10"25627 Pin Punch, Cut 3/16", Hex 5/16",





Long 6-1/2"25704 16 Oz. 14-1/4" Ball Pein Hammer25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver

30841 5/16" X 6" Round Blade Screwdriver

30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57014 1/8" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key19803 20" Tool Box


11916 3/8" Dr. Locking Extension 5"11917 3/8" Dr. Locking Extension 8"11918 3/8" Dr. Locking Extension 12"12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint13203 12 Pt. 3/4" Dr. Std. Skt. 15/16"13204 12 Pt. 3/4" Dr. Std. Skt. 1"13205 12 Pt. 3/4" Dr. Std. Skt. 1-1/16"13206 12 Pt. 3/4" Dr. Std. Skt. 1-1/8"

13207 12 Pt. 3/4" Dr. Std. Skt. 1-3/16"13208 12 Pt. 3/4" Dr. Std. Skt. 1-1/4"13209 12 Pt. 3/4" Dr. Std. Skt. 1-5/16"13210 12 Pt. 3/4" Dr. Std. Skt. 1-3/8"13211 12 Pt. 3/4" Dr. Std. Skt. 1-7/16"13212 12 Pt. 3/4" Dr. Std. Skt. 1-1/2"13213 12 Pt. 3/4" Dr. Std. Skt. 1-9/16"13214 12 Pt. 3/4" Dr. Std. Skt. 1-5/8"13215 12 Pt. 3/4" Dr. Std. Skt. 1-11/16"13216 12 Pt. 3/4" Dr. Std. Skt. 1-3/4"13217 12 Pt. 3/4" Dr. Std. Skt. 1-13/16"13218 12 Pt. 3/4" Dr. Std. Skt. 1-7/8"13220 12 Pt. 3/4" Dr. Std. Skt. 2"13900 3/4" Dr. Ratchet Teardrop-Q.R.13910 3/4" Dr. Extension 5"13912 3/4" Dr. Extension 8"13914 3/4" Dr. Extension 16"13920 3/4" Dr. Flex Handle13922 3/4" Dr. Sliding T Handle13927 3/4" Dr. Adapter 3/4" X 1/2"13929 3/4" Dr. Universal Joint20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"20223 12 Pt. Combo. Wr. 1-5/16"20224 12 Pt. Combo. Wr. 1-3/8"20225 12 Pt. Combo. Wr. 1-7/16"

20226 12 Pt. Combo. Wr. 1-1/2"20550 3/8" Dr. Crowfoot Wr. 3/8"20552 3/8" Dr. Crowfoot Wr. 7/16"20553 3/8" Dr. Crowfoot Wr. 1/2"20554 3/8" Dr. Crowfoot Wr. 9/16"20555 3/8" Dr. Crowfoot Wr. 5/8"20556 3/8" Dr. Crowfoot Wr. 11/16"20557 3/8" Dr. Crowfoot Wr. 3/4"20558 3/8" Dr. Crowfoot Wr. 13/16"20559 3/8" Dr. Crowfoot Wr. 7/8"20564 3/8" Dr. Crowfoot Wr. 1"21404 6 Pt. Dbl. End Flare Nut Wr.



5/8"X11/16"22208 12 Pt. Offset Box Wr. 3/8"X7/16"22210 12 Pt. Offset Box Wr. 1/2"X9/16"22212 12 Pt. Offset Box Wr. 5/8"X3/4"22213 12 Pt. Offset Box Wr. 11/16"X13/16"22214 12 Pt. Offset Box Wr. 3/4"X7/8"22604 Ratcheting Box End Wr. 1/4"X5/16"22608 Ratcheting Box End Wr. 3/8"X7/16"22610 Ratcheting Box End Wr. 1/2"X9/16"22612 Ratcheting Box End Wr. 5/8"X11/16"24006 Adj. Wr. 6"24010 Adj. Wr. 10"24012 Adj. Wr. 12"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy






Long 6-1/2"25702 8 Oz. 12-1/4" Ball Pein Hammer25704 16 Oz. 14-1/4" Ball Pein Hammer25712 3 Lb. 10" Drilling Hammer25714 20 Oz. Rubber Mallet25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57014 1/8" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key57100 3/16" Hollow Shaft Nut Driver57102 1/4" Hollow Shaft Nut Driver57104 5/16" Hollow Shaft Nut Driver57106 11/32" Hollow Shaft Nut Driver57108 3/8" Hollow Shaft Nut Driver

57110 7/16" Hollow Shaft Nut Driver57112 1/2" Hollow Shaft Nut Driver161 Deluxe Feeler Gauge2162 Elec. Wire Stripper & Crimper2297 7" 3-Jaw Puller1708 Stud Extractor2534 Lock Ring Pliers3151 Large Convertible Snap Ring

Pliers485 Gasket Scraper2108 Telescoping Mirror2281 Telescoping Magnetic Retrieving



1/2" Dr.23 101C Straight Cutting, Aviation Snip23 104 10" Straight Cutting Snip31 200C Heavy Duty Retractable

Utility Knife72 1713 3/8" Dr. 11/16" Drag Link Skt.81 601 Replacement Tip for 81600 (Hard)81 602 Replacement Tip for 81600 (Soft)3009 Tape Measure1109 Screw Extractor 1/8"1110 Screw Extractor 3/16"1111 Screw Extractor 15/64"1112 Screw Extractor 5/16"1113 Screw Extractor 3/8"19804 Roller Cabinet, 7 drawer




159 Piece Heavy Duty Industrial Mechanic’s Set (1/2" & 3/4" Drives)


133 Piece Basic Industrial Mechanic’s Set (1/4", 3/8" & 1/2" Drives)

101 Piece General Purpose Industrial Mechanic’s Set (3/8" & 1/2" Drives)

184


11310 12 Pt. 3/8" Dr. Std. Skt. 10mm11311 12 Pt. 3/8" Dr. Std. Skt. 11mm11312 12 Pt. 3/8" Dr. Std. Skt. 12mm11313 12 Pt. 3/8" Dr. Std. Skt. 13mm11314 12 Pt. 3/8" Dr. Std. Skt. 14mm11315 12 Pt. 3/8" Dr. Std. Skt. 15mm11316 12 Pt. 3/8" Dr. Std. Skt. 16mm11317 12 Pt. 3/8" Dr. Std. Skt. 17mm11318 12 Pt. 3/8" Dr. Std. Skt. 18mm11319 12 Pt. 3/8" Dr. Std. Skt. 19mm11360 12 Pt. 3/8" Dr. Dp. Skt. 10mm11361 12 Pt. 3/8" Dr. Dp. Skt. 11mm11362 12 Pt. 3/8" Dr. Dp. Skt. 12mm11363 12 Pt. 3/8" Dr. Dp. Skt. 13mm11364 12 Pt. 3/8" Dr. Dp. Skt. 14mm11365 12 Pt. 3/8" Dr. Dp. Skt. 15mm11367 12 Pt. 3/8" Dr. Dp. Skt. 17mm11369 12 Pt. 3/8" Dr. Dp. Skt. 19mm11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint12309 12 Pt. 1/2" Dr. Std. Skt. 9mm12310 12 Pt. 1/2" Dr. Std. Skt. 10mm

12311 12 Pt. 1/2" Dr. Std. Skt. 11mm12312 12 Pt. 1/2" Dr. Std. Skt. 12mm12313 12 Pt. 1/2" Dr. Std. Skt. 13mm12314 12 Pt. 1/2" Dr. Std. Skt. 14mm12315 12 Pt. 1/2" Dr. Std. Skt. 15mm12316 12 Pt. 1/2" Dr. Std. Skt. 16mm12317 12 Pt. 1/2" Dr. Std. Skt. 17mm12318 12 Pt. 1/2" Dr. Std. Skt. 18mm12319 12 Pt. 1/2" Dr. Std. Skt. 19mm12320 12 Pt. 1/2" Dr. Std. Skt. 20mm12321 12 Pt. 1/2" Dr. Std. Skt. 21mm12322 12 Pt. 1/2" Dr. Std. Skt. 22mm12323 12 Pt. 1/2" Dr. Std. Skt. 23mm12324 12 Pt. 1/2" Dr. Std. Skt. 24mm12327 12 Pt. 1/2" Dr. Std. Skt. 27mm12330 12 Pt. 1/2" Dr. Std. Skt. 30mm12332 12 Pt. 1/2" Dr. Std. Skt. 32mm12800 1/2" Dr. Ratchet Teardrop-Q.R.12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint20307 12 Pt. Combo. Wr. 7mm20308 12 Pt. Combo. Wr. 8mm20309 12 Pt. Combo. Wr. 9mm

20310 12 Pt. Combo. Wr. 10mm20311 12 Pt. Combo. Wr. 11mm20312 12 Pt. Combo. Wr. 12mm20313 12 Pt. Combo. Wr. 13mm20314 12 Pt. Combo. Wr. 14mm20315 12 Pt. Combo. Wr. 15mm20316 12 Pt. Combo. Wr. 16mm20317 12 Pt. Combo. Wr. 17mm20318 12 Pt. Combo. Wr. 18mm20319 12 Pt. Combo. Wr. 19mm20321 12 Pt. Combo. Wr. 21mm20322 12 Pt. Combo. Wr. 22mm24006 Adj. Wr. 6"24010 Adj. Wr. 10"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy












Long 7-1/2"25704 16 Oz. 14-1/4" Ball Pein Hammer25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver

30845 #2 X 1-1/2" Stubby PhillipsScrewdriver

58048 0.9mm Long Arm Hex Key58049 1.3mm Long Arm Hex Key58050 1.5mm Long Arm Hex Key58052 2mm Long Arm Hex Key58054 2.5mm Long Arm Hex Key58056 3mm Long Arm Hex Key58058 4mm Long Arm Hex Key58060 5mm Long Arm Hex Key58062 6mm Long Arm Hex Key58064 8mm Long Arm Hex Key58066 10mm Long Arm Hex Key58068 12mm Long Arm Hex Key58090 14mm Long Arm Hex Key58092 17mm Long Arm Hex Key58094 19mm Long Arm Hex Key19805 Top Chest, 6 drawer


12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"

12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"

20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"24006 Adj. Wr. 6"24010 Adj. Wr. 10"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy Duty25310 Rib Lock Pliers 10"25627 Pin Punch, Cut 3/16", Hex 5/16",





Long 6-1/2"25704 16 Oz. 14-1/4" Ball Pein Hammer25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key57012 3/32" Short Arm Hex Key57014 1/8" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key19803 20" Tool Box


11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"

11910 3/8" Dr. Extension 6"11912 3/8" Dr. Extension 10"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint20208 12 Pt. Combo. Wr. 3/8"20209 12 Pt. Combo. Wr. 7/16"20210 12 Pt. Combo. Wr. 1/2"20211 12 Pt. Combo. Wr. 9/16"20212 12 Pt. Combo. Wr. 5/8"20213 12 Pt. Combo. Wr. 11/16"20214 12 Pt. Combo. Wr. 3/4"20215 12 Pt. Combo. Wr. 13/16"20216 12 Pt. Combo. Wr. 7/8"20217 12 Pt. Combo. Wr. 15/16"20218 12 Pt. Combo. Wr. 1"20219 12 Pt. Combo. Wr. 1-1/16"

20220 12 Pt. Combo. Wr. 1-1/8"20222 12 Pt. Combo. Wr. 1-1/4"24006 Adj. Wr. 6"24010 Adj. Wr. 10"25108 Slip Joint Pliers 8"25206 Chain Nose 6-1/2", w/Cutter25207 Diagonal Cutting Pliers 7", Heavy






Long 6-1/2"25704 16 Oz. 14-1/4" Ball Pein Hammer25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver30841 5/16" X 6" Round Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver57006 .050" Short Arm Hex Key57008 1/16" Short Arm Hex Key57010 5/64" Short Arm Hex Key

57012 3/32" Short Arm Hex Key57014 1/8" Short Arm Hex Key57020 5/32" Short Arm Hex Key57022 3/16" Short Arm Hex Key57024 7/32" Short Arm Hex Key57026 1/4" Short Arm Hex Key57028 5/16" Short Arm Hex Key57030 3/8" Short Arm Hex Key19803 20" Tool Box






■ Item Number: 19640 with No. 19804 Roller Cabinet ■ Item Number: 19639 Tools Only - 80 pcs. (contains one each of the following:)

11916 3/8" Dr. Locking Extension 5"11917 3/8” Dr. Locking Extension 8”11918 3/8” Dr. Locking Extension 12”13203 12 Pt. 3/4" Dr. Standard Socket

15/16"13204 12 Pt. 3/4" Dr. Standard Socket 1"13205 12 Pt. 3/4" Dr. Standard

Socket 1-1/16"13206 12 Pt. 3/4" Dr. Standard Socket

1-1/8"13207 12 Pt. 3/4" Dr. Standard Socket












1-7/8"13220 12 Pt. 3/4" Dr. Standard Socket 2"13900 3/4" Dr. Ratchet Teardrop-Q.R.13910 3/4" Dr. Extension 5"13912 3/4" Dr. Extension 8"13914 3/4" Dr. Extension 16"13920 3/4" Dr. Flex Handle13922 3/4" Dr. Sliding T Handle13927 3/4" Dr. Adapter 3/4" X 1/2"13929 3/4" Dr. Universal Joint20223 12 Pt. Combination Wrench 1-5/16"20224 12 Pt. Combination Wrench 1-3/8"20225 12 Pt. Combination Wrench 1-7/16"20226 12 Pt. Combination Wrench 1-1/2"20550 3/8" Dr. Crowfoot Wrench 3/8"20552 3/8" Dr. Crowfoot Wrench 7/16"20553 3/8" Dr. Crowfoot Wrench 1/2"

20554 3/8" Dr. Crowfoot Wrench 9/16"20555 3/8" Dr. Crowfoot Wrench 5/8"20556 3/8" Dr. Crowfoot Wrench 11/16"20557 3/8" Dr. Crowfoot Wrench 3/4"20558 3/8" Dr. Crowfoot Wrench 13/16"20559 3/8" Dr. Crowfoot Wrench 7/8"20564 3/8" Dr. Crowfoot Wrench 1"21404 6 Pt. Dbl. End Flare Nut Wrench

3/8"X7/16"21410 6 Pt. Dbl. End Flare Nut Wrench

1/2"X9/16"21412 6 Pt. Dbl. End Flare Nut Wrench

5/8"X11/16"22208 12 Pt. Offset Box Wrench

3/8"X7/16"22210 12 Pt. Offset Box Wrench

1/2"X9/16"22212 12 Pt. Offset Box Wrench 5/8"X3/4"22213 12 Pt. Offset Box Wrench

11/16"X13/16"22214 12 Pt. Offset Box Wrench 3/4"X7/8"22604 Ratcheting Box End Wrench

1/4"X5/16"22608 Ratcheting Box End Wrench

3/8"X7/16"

22610 Ratcheting Box End Wrench1/2"X9/16"

22612 Ratcheting Box End Wrench5/8"X11/16"

24012 Adjustable Wrench 12"25316 Rib Lock Pliers 16"25702 8 Oz. 12-1/4" Ball Pein Hammer25712 3 Lb. 10" Drilling Hammer25714 20 Oz. Rubber Mallet57100 3/16" Hollow Shaft Nut Driver57102 1/4" Hollow Shaft Nut Driver57104 5/16" Hollow Shaft Nut Driver57106 11/32" Hollow Shaft Nut Driver57108 3/8" Hollow Shaft Nut Driver57110 7/16" Hollow Shaft Nut Driver57112 1/2" Hollow Shaft Nut Driver161 Deluxe Feeler Gauge2162 Electrical Wire Stripper & Crimper2297 7" 3-Jaw Puller1708 Stud Extractor2534 Lock Ring Pliers3151 Large Convertible Snap Ring Pliers485 Gasket Scraper2108 Telescoping Mirror2281 Telescoping Magnetic Retrieving



1/2" Dr.23 101C Straight Cutting, Aviation Snip23 104 10" Straight Cutting Snip31 200C Heavy Duty Retractable Utility Knife72 1713 3/8" Dr. 11/16" Drag Link Socket81 601 Replacement Tip For 81600 (Hard)81 602 Replacement Tip For 81600 (Soft)3009 Tape Measure1109 Screw Extractor 1/8"1110 Screw Extractor 3/16"1111 Screw Extractor 15/64"1112 Screw Extractor 5/16"1113 Screw Extractor 3/8"19804 Roller Cabinet, 7 drawer


108 Piece Basic Metric Set (3/8" & 1/2" Drives)



81 Piece 3/4" Drive Heavy Duty Mechanic’s Add-on Set

185


11901B 3/8" Dr. Black Ratchet Teardrop11920B 3/8" Dr. Black Flex Handle12801B 1/2" Dr. Black Ratchet Teardrop12820B 1/2" Dr. Black Flex-Handle20208B 12 Pt. Black Combo. Wr. 3/8"20209B 12 Pt. Black Combo. Wr. 7/16"20210B 12 Pt. Black Combo. Wr. 1/2"20211B 12 Pt. Black Combo. Wr. 9/16"20212B 12 Pt. Black Combo. Wr. 5/8"20213B 12 Pt. Black Combo. Wr. 11/16"20214B 12 Pt. Black Combo. Wr. 3/4"20215B 12 Pt. Black Combo. Wr. 13/16"20216B 12 Pt. Black Combo. Wr. 7/8"20217B 12 Pt. Black Combo. Wr. 15/16"20218B 12 Pt. Black Combo. Wr. 1"20219B 12 Pt. Black Combo. Wr. 1-1/16"20220B 12 Pt. Black Combo. Wr. 1-1/8"20222B 12 Pt. Black Combo. Wr. 1-1/4"21750 Adj Spanner Wr. Hook 3/4" To 2"

21752 Adj Spanner Wr. Hook 2" To 4-3/4"26108 Black Adj. Wr. 8"26112 Black Adj. Wr. 12"34006 6 Pt. 3/8" Dr. Std. Impact Skt. 5/16"34008 6 Pt. 3/8" Dr. Std. Impact Skt. 3/8"34009 6 Pt. 3/8" Dr. Std. Impact Skt. 7/16"34010 6 Pt. 3/8" Dr. Std. Impact Skt. 1/2"34011 6 Pt. 3/8" Dr. Std. Impact Skt. 9/16"34012 6 Pt. 3/8" Dr. Std. Impact Skt. 5/8"34013 6 Pt. 3/8" Dr. Std. Impact Skt.

11/16"34014 6 Pt. 3/8" Dr. Std. Impact Skt. 3/4"34056 6 Pt. 3/8" Dr. Dp. Impact Skt. 5/16"34058 6 Pt. 3/8" Dr. Dp. Impact Skt. 3/8"34059 6 Pt. 3/8" Dr. Dp. Impact Skt. 7/16"34060 6 Pt. 3/8" Dr. Dp. Impact Skt. 1/2"34061 6 Pt. 3/8" Dr. Dp. Impact Skt. 9/16"34062 6 Pt. 3/8" Dr. Dp. Impact Skt. 5/8"34063 6 Pt. 3/8" Dr. Dp. Impact Skt. 11/16"

34064 6 Pt. 3/8" Dr. Dp. Impact Skt. 3/4"34203 3/8" Dr. Impact Extension 3"34205 3/8" Dr. Impact Universal Joint34206 3/8" Dr. Impact Extension 6"35008 6 Pt. 1/2" Dr. Std. Impact Skt. 3/8"35009 6 Pt. 1/2" Dr. Std. Impact Skt. 7/16"35010 6 Pt. 1/2" Dr. Std. Impact Skt. 1/2"35011 6 Pt. 1/2" Dr. Std. Impact Skt. 9/16"35012 6 Pt. 1/2" Dr. Std. Impact Skt. 5/8"35013 6 Pt. 1/2" Dr. Std. Impact Skt.

11/16"35014 6 Pt. 1/2" Dr. Std. Impact Skt. 3/4"35015 6 Pt. 1/2" Dr. Std. Impact Skt.

13/16"35016 6 Pt. 1/2" Dr. Std. Impact Skt. 7/8"35017 6 Pt. 1/2" Dr. Std. Impact Skt.

15/16"35018 6 Pt. 1/2" Dr. Std. Impact Skt. 1"35019 6 Pt. 1/2" Dr. Std. Impact Skt.

1-1/16"35020 6 Pt. 1/2" Dr. Std. Impact Skt.

1-1/8"35022 6 Pt. 1/2" Dr. Std. Impact Skt.

1-1/4"35058 6 Pt. 1/2" Dr. Dp. Impact Skt. 3/8"35059 6 Pt. 1/2" Dr. Dp. Impact Skt. 7/16"35060 6 Pt. 1/2" Dr. Dp. Impact Skt. 1/2"35061 6 Pt. 1/2" Dr. Dp. Impact Skt. 9/16"35062 6 Pt. 1/2" Dr. Dp. Impact Skt. 5/8"35063 6 Pt. 1/2" Dr. Dp. Impact Skt. 11/16"35064 6 Pt. 1/2" Dr. Dp. Impact Skt. 3/4"35065 6 Pt. 1/2" Dr. Dp. Impact Skt. 13/16"35066 6 Pt. 1/2" Dr. Dp. Impact Skt. 7/8"35067 6 Pt. 1/2" Dr. Dp. Impact Skt. 15/16"35068 6 Pt. 1/2" Dr. Dp. Impact Skt.

1"35069 6 Pt. 1/2" Dr. Dp. Impact Skt.

1-1/16"

35070 6 Pt. 1/2" Dr. Dp. Impact Skt. 1-1/8"

35072 6 Pt. 1/2" Dr. Dp. Impact Skt. 1-1/4"

35200 1/2" Dr. Impact Extension 10"35203 1/2" Dr. Impact Extension 3"35206 1/2" Dr. Impact Extension 6"35207 1/2" Dr. Impact Universal Joint19803 20" Tool Box


12209 12 Pt. 1/2" Dr. Std. Skt. 7/16"12210 12 Pt. 1/2" Dr. Std. Skt. 1/2"12211 12 Pt. 1/2" Dr. Std. Skt. 9/16"12212 12 Pt. 1/2" Dr. Std. Skt. 5/8"12213 12 Pt. 1/2" Dr. Std. Skt. 11/16"12214 12 Pt. 1/2" Dr. Std. Skt. 3/4"12215 12 Pt. 1/2" Dr. Std. Skt. 13/16"12216 12 Pt. 1/2" Dr. Std. Skt. 7/8"

12217 12 Pt. 1/2" Dr. Std. Skt. 15/16"12218 12 Pt. 1/2" Dr. Std. Skt. 1"12219 12 Pt. 1/2" Dr. Std. Skt. 1-1/16"12220 12 Pt. 1/2" Dr. Std. Skt. 1-1/8"12222 12 Pt. 1/2" Dr. Std. Skt. 1-1/4"12260 12 Pt. 1/2" Dr. Dp. Skt. 1/2"12261 12 Pt. 1/2" Dr. Dp. Skt. 9/16"12262 12 Pt. 1/2" Dr. Dp. Skt. 5/8"

12263 12 Pt. 1/2" Dr. Dp. Skt. 11/16"12264 12 Pt. 1/2" Dr. Dp. Skt. 3/4"12265 12 Pt. 1/2" Dr. Dp. Skt. 13/16"12266 12 Pt. 1/2" Dr. Dp. Skt. 7/8"12267 12 Pt. 1/2" Dr. Dp. Skt. 15/16"12268 12 Pt. 1/2" Dr. Dp. Skt. 1"12269 12 Pt. 1/2" Dr. Dp. Skt. 1-1/16"12270 12 Pt. 1/2" Dr. Dp. Skt. 1-1/8"

12800 1/2" Dr. Ratchet Teardrop-Q.R.12805 1/2" Dr. Extension 3"12810 1/2" Dr. Extension 6"12812 1/2" Dr. Extension 10"12820 1/2" Dr. Flex Handle12825 1/2" Dr. Speeder Handle12830 1/2" Dr. Universal Joint19803 20" Tool Box



11208 12 Pt. 3/8" Dr. Std. Skt. 3/8"11209 12 Pt. 3/8" Dr. Std. Skt. 7/16"11210 12 Pt. 3/8" Dr. Std. Skt. 1/2"11211 12 Pt. 3/8" Dr. Std. Skt. 9/16"11212 12 Pt. 3/8" Dr. Std. Skt. 5/8"11213 12 Pt. 3/8" Dr. Std. Skt. 11/16"

11214 12 Pt. 3/8" Dr. Std. Skt. 3/4"11258 12 Pt. 3/8" Dr. Dp. Skt. 3/8"11259 12 Pt. 3/8" Dr. Dp. Skt. 7/16"11260 12 Pt. 3/8" Dr. Dp. Skt. 1/2"11261 12 Pt. 3/8" Dr. Dp. Skt. 9/16"11262 12 Pt. 3/8" Dr. Dp. Skt. 5/8"

11263 12 Pt. 3/8" Dr. Dp. Skt. 11/16"11264 12 Pt. 3/8" Dr. Dp. Skt. 3/4"11412 6 Pt. 3/8" Dr. Spark Plug Skt. 5/8"11900 3/8" Dr. Ratchet Teardrop-Q.R.11905 3/8" Dr. Extension 3"11910 3/8" Dr. Extension 6"

11912 3/8" Dr. Extension 10"11920 3/8" Dr. Flex Handle11926 3/8" Dr. Speeder Handle11930 3/8" Dr. Universal Joint19803 20" Tool Box


10102 6 Pt. 1/4" Dr. Std. Skt. 4mm10104 6 Pt. 1/4" Dr. Std. Skt. 5mm10106 6 Pt. 1/4" Dr. Std. Skt. 6mm10107 6 Pt. 1/4" Dr. Std. Skt. 7mm10108 6 Pt. 1/4" Dr. Std. Skt. 8mm10109 6 Pt. 1/4" Dr. Std. Skt. 9mm10110 6 Pt. 1/4" Dr. Std. Skt. 10mm10111 6 Pt. 1/4" Dr. Std. Skt. 11mm10112 6 Pt. 1/4" Dr. Std. Skt. 12mm10113 6 Pt. 1/4" Dr. Std. Skt. 13mm10156 6 Pt. 1/4" Dr. Dp. Skt. 6mm10157 6 Pt. 1/4" Dr. Dp. Skt. 7mm10158 6 Pt. 1/4" Dr. Dp. Skt. 8mm10159 6 Pt. 1/4" Dr. Dp. Skt. 9mm10160 6 Pt. 1/4" Dr. Dp. Skt. 10mm10161 6 Pt. 1/4" Dr. Dp. Skt. 11mm10162 6 Pt. 1/4" Dr. Dp. Skt. 12mm10163 6 Pt. 1/4" Dr. Dp. Skt. 13mm10164 6 Pt. 1/4" Dr. Dp. Skt. 14mm11309 12 Pt. 3/8" Dr. Std. Skt. 9mm11310 12 Pt. 3/8" Dr. Std. Skt. 10mm11311 12 Pt. 3/8" Dr. Std. Skt. 11mm11312 12 Pt. 3/8" Dr. Std. Skt. 12mm11313 12 Pt. 3/8" Dr. Std. Skt. 13mm11314 12 Pt. 3/8" Dr. Std. Skt. 14mm11315 12 Pt. 3/8" Dr. Std. Skt. 15mm11317 12 Pt. 3/8" Dr. Std. Skt. 17mm11318 12 Pt. 3/8" Dr. Std. Skt. 18mm11319 12 Pt. 3/8" Dr. Std. Skt. 19mm11359 12 Pt. 3/8" Dr. Dp. Skt. 9mm

11360 12 Pt. 3/8" Dr. Dp. Skt. 10mm11361 12 Pt. 3/8" Dr. Dp. Skt. 11mm11362 12 Pt. 3/8" Dr. Dp. Skt. 12mm11363 12 Pt. 3/8" Dr. Dp. Skt. 13mm11364 12 Pt. 3/8" Dr. Dp. Skt. 14mm11365 12 Pt. 3/8" Dr. Dp. Skt. 15mm11366 12 Pt. 3/8" Dr. Dp. Skt. 16mm11367 12 Pt. 3/8" Dr. Dp. Skt. 17mm11368 12 Pt. 3/8" Dr. Dp. Skt. 18mm11369 12 Pt. 3/8" Dr. Dp. Skt. 19mm12310 12 Pt. 1/2" Dr. Std. Skt. 10mm12311 12 Pt. 1/2" Dr. Std. Skt. 11mm12312 12 Pt. 1/2" Dr. Std. Skt. 12mm12313 12 Pt. 1/2" Dr. Std. Skt. 13mm12314 12 Pt. 1/2" Dr. Std. Skt. 14mm12315 12 Pt. 1/2" Dr. Std. Skt. 15mm12316 12 Pt. 1/2" Dr. Std. Skt. 16mm12317 12 Pt. 1/2" Dr. Std. Skt. 17mm12318 12 Pt. 1/2" Dr. Std. Skt. 18mm12319 12 Pt. 1/2" Dr. Std. Skt. 19mm12320 12 Pt. 1/2" Dr. Std. Skt. 20mm12321 12 Pt. 1/2" Dr. Std. Skt. 21mm12322 12 Pt. 1/2" Dr. Std. Skt. 22mm12323 12 Pt. 1/2" Dr. Std. Skt. 23mm12324 12 Pt. 1/2" Dr. Std. Skt. 24mm12325 12 Pt. 1/2" Dr. Std. Skt. 25mm12326 12 Pt. 1/2" Dr. Std. Skt. 26mm12327 12 Pt. 1/2" Dr. Std. Skt. 27mm12328 12 Pt. 1/2" Dr. Std. Skt. 28mm20307 12 Pt. Combo. Wr. 7mm

20308 12 Pt. Combo. Wr. 8mm20309 12 Pt. Combo. Wr. 9mm20310 12 Pt. Combo. Wr. 10mm20311 12 Pt. Combo. Wr. 11mm20312 12 Pt. Combo. Wr. 12mm20313 12 Pt. Combo. Wr. 13mm20314 12 Pt. Combo. Wr. 14mm20315 12 Pt. Combo. Wr. 15mm20316 12 Pt. Combo. Wr. 16mm20317 12 Pt. Combo. Wr. 17mm20318 12 Pt. Combo. Wr. 18mm20319 12 Pt. Combo. Wr. 19mm20321 12 Pt. Combo. Wr. 21mm20322 12 Pt. Combo. Wr. 22mm20565 3/8" Dr. Crowfoot Wr. 10mm20570 3/8" Dr. Crowfoot Wr. 11mm20571 3/8" Dr. Crowfoot Wr. 12mm20572 3/8" Dr. Crowfoot Wr. 13mm20573 3/8" Dr. Crowfoot Wr. 14mm20574 3/8" Dr. Crowfoot Wr. 15mm20575 3/8" Dr. Crowfoot Wr. 16mm20576 3/8" Dr. Crowfoot Wr. 17mm20577 3/8" Dr. Crowfoot Wr. 18mm20578 3/8" Dr. Crowfoot Wr. 19mm21106 15D Angle Open End Wr. 6X8mm21107 15D Angle Open End Wr. 7X9mm21110 15D Angle Open End Wr. 10X11mm21112 15D Angle Open End Wr. 12X14mm21113 15D Angle Open End Wr. 13X15mm21117 15D Angle Open End Wr. 17X19mm

21511 6 Pt. Dbl. End Flare Nut Wr.11X12mm



30854 Solid Shaft Nut Driver 5mm30856 Solid Shaft Nut Driver 6mm30857 Solid Shaft Nut Driver 7mm30858 Solid Shaft Nut Driver 8mm30859 Solid Shaft Nut Driver 9mm30860 Solid Shaft Nut Driver 10mm30861 Solid Shaft Nut Driver 11mm57116 1.5mm Short Arm Hex Key57118 2mm Short Arm Hex Key57120 2.5mm Short Arm Hex Key57122 3mm Short Arm Hex Key57124 4mm Short Arm Hex Key57126 5mm Short Arm Hex Key57128 6mm Short Arm Hex Key57129 0.7mm Short Arm Hex Key57130 8mm Short Arm Hex Key57131 0.9mm Short Arm Hex Key57132 10mm Short Arm Hex Key57133 12mm Short Arm Hex Key57134 14mm Short Arm Hex Key57135 1.3mm Short Arm Hex Key57138 17mm Short Arm Hex Key58672 3/8" Dr. Hex Bit Skt. 2mm58674 3/8" Dr. Hex Bit Skt. 2.5mm

58676 3/8" Dr. Hex Bit Skt. 3mm58678 3/8" Dr. Hex Bit Skt. 4mm58680 3/8" Dr. Hex Bit Skt. 5mm58682 3/8" Dr. Hex Bit Skt. 6mm58684 3/8" Dr. Hex Bit Skt. 8mm58686 3/8" Dr. Hex Bit Skt. 10mm66305 Midget Open End Wr. 5.5mm66306 Midget Open End Wr. 6mm66307 Midget Open End Wr. 7mm66308 Midget Open End Wr. 8mm66309 Midget Open End Wr. 9mm66310 Midget Open End Wr. 10mm66311 Midget Open End Wr. 11mm66408 6 Pt. Midget Combo. Wr. 4.5X4mm66409 6 Pt. Midget Combo. Wr. 4X4.5mm66411 12 Pt. Midget Combo. Wr. 5X5.5mm66412 12 Pt. Midget Combo. Wr. 5X6mm66413 12 Pt. Midget Combo. Wr. 5.5X6mm66414 12 Pt. Midget Combo. Wr. 6X7mm66416 12 Pt. Midget Combo. Wr. 7X8mm66418 12 Pt. Midget Combo. Wr. 8X9mm66420 12 Pt. Midget Combo. Wr. 9X10mm66422 12 Pt. Midget Combo. Wr.

10X11mm19803 20" Tool Box


■ Item Number: 19642 with No. 19803 20" Tool Box ■ Item Number:19641 Tools Only - 140 pcs. (contains one each of the following:)

■ Item Number: 19638 with No. 19803 20" Tool Box ■ Item Number: 19637 Tools Only - 73 pcs. (contains one each of the following:)




Duty25310 Rib Lock Pliers 10"25704 16 Oz. 14-1/4" Ball Pein Hammer

25716 12 Oz. 11-5/8" Soft Face Hammer30833 3/16" X 3" Cabinet Tip Screwdriver30836 #1 X 3" Phillips Screwdriver30837 #2 X 4" Phillips Screwdriver30838 #3 X 6" Phillips Screwdriver30839 1/4" X 4" Round Blade Screwdriver

30841 5/16" X 6" Round Blade Screwdriver30844 1/4" X 1-1/2" Stubby Screwdriver30845 #2 X 1-1/2" Stubby Phillips

Screwdriver19803 20" Tool Box



15 Piece Accessory Set



74 Piece 3/8" & 1/2" Black OxTM Add-on Set

141 Piece Metric Add-on Set (1/4", 3/8" & 1/2" Drives)

186

SOCKET HEAD CAP SCREWSNOMINAL KEY FLAT HEAD BUTTON HEAD SHOULDER PRESSURE LOW HEAD NOMINAL KEYSIZE, INCHES 1960 SERIES 1936 SERIES CAP SCREWS CAP SCREWS SET SCREWS SCREWS PLUGS ALLENUTS CAP SCREWS SIZE, INCHES

.028 — — — — 0 — — — — .028

.035 — — 0 0 1, 2 — — — — .035

.050 0 0, 1 1, 2 1, 2 3, 4 — — — 4 .0501/16 1 2 3, 4 3, 4 5, 6 — — — 5, 6 1/165/64 2, 3 3, 4 5, 6 5, 6 8 — — — 8 5/643/32 4, 5 5, 6 8 8 10 — — — 10 3/327/64 6 — — — — — — — — 7/641/8 — 8 10 10 1/4 1/4 — 4, 5 1/4 1/8

9/64 8 10 — — — — — — — 9/645/32 10 1/4 1/4 1/4 5/16 5/16 1/16 6 5/16 5/323/16 1/4 — 5/16 5/16 3/8 3/8 1/8 8, 10 3/8 3/167/32 — 5/16 3/8 3/8 7/16 — — — 7/16 7/321/4 5/16 — 7/16 — 1/2 1/2 1/4 1/4 1/2 1/4

5/16 3/8 3/8, 7/16 1/2 — 5/8 5/8 3/8 5/16 5/8 5/163/8 7/16, 1/2 1/2 5/8 — 3/4 3/4 1/2 3/8 — 3/8

7/16 — — — — — — — 7/16 — 7/161/2 5/8 5/8 3/4 — 7/8 1 — 1/2 — 1/2

9/16 — 3/4, 7/8 7/8 — 1, 1 1/8 — 3/4 — — 9/165/8 3/4 1 1 — 1 1/4, 1 3/8 1 1/4 1 5/8 — 5/83/4 7/8, 1 — 1 1/18 — 1 1/2 — 1 1/4 3/4 — 3/47/8 1 1/8, 1 1/4 — 1 1/4, 1 3/8 — — 1 1/2 — 7/8 — 7/81 1 3/8, 1 1/2 1 1/2 1 1/2 — 1 3/4, 2 1 3/4 1 1/2, 2 1 — 1

1 1/4 1 3/4 — — — — 2 — 1 1/4 — 1 1/41 1/2 2 1 1/8, 1 1/4, — — — — — 1 1/2 — 1 1/2

1 3/81 3/4 2 1/4, 2 1/2 — — — — — — — — 1 3/4

2 2 3/4 — — — — — — — — 2

KEY SELECTOR CHARTS

Allen Key Fit Selector — Keys Fit These Products

NOMINAL KEY SOCKET HEAD FLAT HEAD BUTTON HEAD SET SHOULDER LOW HEAD NOMINAL KEYSIZE, MM CAP SCREWS CAP SCREWS CAP SCREWS SCREWS SCREWS ALLENUTS CAP SCREWS SIZE, MM

0.7 — — — M1.4, M1.6, M1.7 — — — 0.70.9 — — — M2, M2.3 — — — 0.91.3 M1.4 — — M2.5, M2.6 — — — 1.31.5 M1.6, M1.7, M2 — — M3 — — — 1.52 M2.3, M2.5, M2.6 M3 M3 M4 — — — 2

2.5 M3 M4 M4 M5 — — — 2.53 M4 M5 M5 M6 6mm M3 M4 34 M5 M6 M6 M8 8mm M4 M5 45 M6 M8 M8 M10 10mm M5 M6 56 M8 M10 M10 M12, M14 12mm M6 M8 68 M10 M12 M12 M16 16mm M8 M10 810 M12 M14, M16 — M20 20mm M10 M12 1012 M14 M20 — M24 — M12 M14 1214 M16 — — — — — M16 1417 M20 — — — — M16 M20, M22 1719 M24 — — — — — M24 19

Allen Metric Key Fit Selector — Keys Fit These Products

H-K

H-K

187

CONVERSION CHART

CONVERSION CHART SHOWING MILLIMETER SIZES, FRACTIONAL AND DECIMAL INCH SIZES

Milli- Dec. Frac- Milli- Dec. Frac- Milli- Dec. Frac- Milli- Dec. Frac- Milli- Dec. Frac-Meter Equiv. tional Meter Equiv. tional Meter Equiv. tional Meter Equiv. tional Meter Equiv. tional

.1 .0039 1.75 .0689 … .1570 6.8 .2677 10.72 .4219 27/64".15 .0059 … .0700 4.0 .1575 6.9 .2716 11.0 .4330.2 .0079 1.8 .0709 … .1590 … .2720 11.11 .4375 7/16".25 .0098 1.85 .0728 … .1610 7.0 .2756 11.5 .4528.3 .0118 … .0730 4.1 .1614 … .2770 11.51 .4531 29/64"

… .0135 1.9 .0748 4.2 .1654 7.1 .2795 11.91 .4687 15/32".35 .0138 … .0760 … .1660 … .2811 12.0 .4724… .145 1.95 .0767 4.25 .1673 7.14 .2812 9/32" 12.30 .4843 31/64".39 .0156 1/64" 1.98 .0781 5/64" 4.3 .1693 7.2 .2835 12.5 .4921.4 .0157 … .0785 … .1695 7.25 .2854 12.7 .5000 1/2"

… .0160 2.0 .0787 4.37 .1719 11/64" 7.3 .2874 13.0 .5118.45 .0177 2.05 .0807 … .1730 … .2900 13.10 .5156 33/64"… .0180 … .0810 4.4 .1732 7.4 .2913 13.49 .5312 17/32".5 .0197 … .0820 … .1770 … .2950 13.5 .5315

… .0200 2.1 .0827 4.5 .1771 7.5 .2953 13.89 .5469 35/64"… .0210 2.15 .0846 … .1800 7.54 .2968 19/64" 14.0 .5512.55 .0217 … .0860 4.6 .1811 7.6 .2992 14.29 .5625 9/16"… .0225 2.2 .0866 … .1820 … .3020 14.5 .5709.6 .0236 2.25 .0885 4.7 .1850 7.7 .3031 14.68 .5781 37/64"

… .0240 … .0890 4.75 .1870 7.75 .3051 15.0 .5906… .0250 2.3 .0905 4.76 .1875 3/16" 7/8 .3071 15.08 .5937 19/32".65 .0256 2.35 .0925 4.8 .1890 7.9 .3110 15.48 .6094 39/64"… .0260 … .0935 … .1910 7.94 .3125 5/16" 15.5 .6102… .0280 2.38 .0937 3/32" 4.9 .1929 8.0 .3150 15.88 .6250 5/8".7 .0276 2.4 .0945 … .1935 … .3160 16.0 .6299

… .0292 … .0960 … .1960 8.1 .3189 16.27 .6406 41/64".75 .0295 2.45 .0964 5.0 .1968 8.2 .3228 16.5 .6496… .0310 … .0980 … .1990 … .3230 16.67 .6562 21/32".79 .0312 1/32" 2.5 .0984 5.1 .2008 8.25 .3248 17.0 .6693.8 .0315 … .0995 … .2010 8.3 .3268 17.06 .6719 43/64"

… .0320 … .1015 5.16 .2031 13/64" 8.33 .3281 21/64" 17.46 .6875 11/16"… .0330 2.6 .1024 … .2040 8.4 .3307 17.5 .68908.5 .0335 … .1040 5.2 .2047 … .3320 17.86 .7031 45/64"… .0350 2.7 .1063 … .2055 8.5 .3346 18.0 .7087.9 .0354 … .1065 5.25 .2067 8.6 .3386 18.26 .7187 23/32"

… .0360 2.75 .1082 5.3 .2086 … .3390 18.5 .7283… .0370 2.78 .1094 7/64" … .2090 8.7 .3425 18.65 .7344 47/64".95 .0374 … .1100 5.4 .2126 8.73 .3437 11/32" 19.0 .7480… .0380 2.8 .1102 … .2130 8.75 .3445 19.05 .7500 3/4"… .0390 … .1110 5.5 .2165 8.8 .3465 19.45 .7656 49/64"1.0 .0394 … .1130 5.56 .2187 7/32" … .3480 19.5 .7677… .0400 2.9 .1141 5.6 .2205 8.9 .3504 19.84 .7812 25/32"… .0410 … .1160 … .2210 9.0 .3543 20.0 .7874

1.05 .0413 3.0 .1181 5.7 .2244 … .3580 20.24 .7969 51/64"… .0420 … .1200 5.75 .2263 9.1 .3583 20.5 .8071… .0430 3.1 .1220 … .2280 9.13 .3594 23/64" 20.64 .8125 13/16"1.1 .0433 3.18 .1250 1/8" 5.8 .2283 9.2 .3622 21.0 .82681.15 .0452 3.2 .1260 5.9 .2323 9.25 .3641 21.03 .8281 53/64"… .0465 3.25 .1279 … .2340 9.3 .3661 21.43 .8437 27/32"

1.19 .0469 3/64" … .1285 5.95 .2344 15/64" … .3680 21.5 .84651.2 .0472 3.3 .1299 6.0 .2362 9.4 .3701 21.83 .8594 55/64"

1.25 .0492 3.4 .1338 … .2380 9.5 .3740 22.0 .86611.3 .0512 … .1360 6.1 .2401 9.53 .3750 3/8" 22.23 .8750 7/8"… .0520 3.5 .1378 … .2420 … .3770 22.5 .8858

1.35 .0531 … .1405 6.2 .2441 9.6 .3780 22.64 .8906 57/64"… .0550 3.57 .1406 9/64" 6.25 .2460 9.7 .3819 23.0 .90551.4 .0551 3.6 .1417 6.3 .2480 9.75 .3838 23.02 .9062 29/32"

1.45 .0570 … .1440 6.35 .2500 1/4" 9.8 .3558 23.42 .9219 59/64"1.5 .0591 3.7 .1457 6.4 .2520 … .3860 23.5 .9252… .0595 … .1470 6.5 .2559 9.9 .3898 23.81 .9375 15/16"

1.55 .0610 3.75 .1476 … .2570 9.92 .3906 25/64" 24.0 .94491.59 .0625 1/16" … .1495 6.6 .2598 10.0 .3937 24.21 .9531 61/64"1.6 .0519 3.8 .1496 … .2610 … .3970 24.5 .9646… .0635 … .1520 6.7 .2638 … .4040 24.61 .9687 31/32"

1.65 .0649 3.9 .1535 6.75 .2656 17/64" 10.32 .4062 13/32" 25.0 .98431.7 .0669 … .1540 6.75 .2657 … .4130 25.03 .9844 63/64"… .0670 3.97 .1562 5/32" … .2660 10.5 .4134 25.4 1.000 1"

Danaher Tool GroupHunt Valley, MD 21031

NIDA-SIDA Manufacturer’s Code No. 082171

Allen™, Armstrong®, Allendrive®, Torque-Wrap®, Allengrip®, Quick-Flip®, Holo-Krome®, K-D Tools®, Plas-T-Key®, Uni-Strap® andDuracast® are registered trademarks of Danaher Tool Group Division of Danaher Corporation. Jacobs® is a registered trademark of Power Tool Holders, Inc. Torx® is a registered trademark of Camcar Division of Textron, Inc.

This catalog may not be copied in whole or in part without prior authorization.

© Copyright 1999, Danaher Corporation. All rights reserved. Printed in U.S.A. Catalog Number: 89074-69

If you haven’t already done so, please read the Disclaimer (Mac) or ReadMe (IBM compatible) filecontained on this CD. These files contain important legal information regarding your use of this CD.

This PDF file is laid out in identical order to the print version of Allen catalog 89074-69, and navigating the catalog works in the same manner as any typical PDF file.

Due to the large size of this file, it is recommended that you do the following:

1. Copy the catalog file (Allen.pdf) to your computer’s hard drive. This will greatly increase the speed of your navigation.

2. Make sure that you are using the most recent version of Adobe® Acrobat® Reader. The most recent version (as of 5/00) can be found on the CD.

Navigation Hints

1. To find an item by part number, simply click on the part number in the PRODUCT INDEX.And to find an item by tool type, simply click on the item description in the SPEED INDEXor in the TABLE OF CONTENTS

2. When viewing the INDUSTRIAL TOOL SETS section,you can quickly see a detailed listing of the contents of a specific set by clicking on the red box which surrounds the basic set description.This will take you to the INDUSTRIAL TOOL SETS CONTENTS section of the catalog.

3. When viewing the INDUSTRIAL TOOL SETS CONTENTS section, you can quickly see a photo of the corresponding set by clicking on the set’s green name bar.

CLICK HERE TO BEGIN

Welcome to the Allen™ Catalog PDF!

1

2

3

Date post:	28-Jun-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

CLICK HERE FOR NAVIGATION HINTS - Home | NH Bragg...Wrenches Combination 73-76 Open End 76-77 Box...

Documents