ML 117VS-6-1A
CLINTON SERVICE GUIDE MODEL 117VS-FOTA-KS
PEGASUS FS613
SHEAR CUTTER FOR SHOULDER TAPING OPERATION
MOVABLE BLADE
FIXED BLADE
• • ® CUNTON INDUSTRIES, INC.
II 700 Washington Avenue Ccrlstcdt. N.J. 07072 Phone: 201 - 935- 4242 FAX: 201-935- 3615 Web Site: http:/ / www.clintonind.com Email: generoiOclintonind.com
From the library of: Superior Sewing Machine & Supply LLC
ML117VS-6-2
ADJUSTMENTS
WARNING!! TO PREVENT SERIOUS INJURY, DISCONNECT AIR SUPPLY BEFORE MAKING ANY ADJUSTMENTS.
STEP 1
STEP 2
33-4220-08 SCREW S.H.S.S.
REMOVE THE OLD EXISTING FACE PLATE. THEN MOUNT THE MODEL 117VS CUTTER AS ONE COMPLETE ASSEMBLY WITH THE (4) EXISTING FACE PLATE SCREWS AS SHOWN.
EXISTING SCREWS
CUTTER SHOWN MOVED TO ONE SIDE FOR ILLUSTRATION PURPOSES ONLY.
ADJUSTING THE MOVABLE BLADE
02-0272-01 MOVABLE BLADE SUPPORT
1----02-0271-01
SHOULDER SCREW 33-4220-08 SHOULD BE SCREWED INTO THE BLADE SUPPORT FINGER TIGHT. THE HEX NUT 33-1516-01 IS USED TO LOCK IN THE ADJUSTED CONDITION.
MOVABLE BLADE
From the library of: Superior Sewing Machine & Supply LLC
STEP 3 ADJUSTING THE STATIONARY BLADE
IF THE BLADES ARE NOT TOUCHING EACH OTHER, LOOSEN THE THE (2) SCREWS 33-3210-06. THIS WILL ALLOW THE (2) TOP JACK SCREWS JJ-2210-03 TO BE TURNED TO MAKE UP ANY ADJUSTMENT. ADJUST THE (2) SCREWS 33-2210-03 ON THE RIGHT f"OR THE RADIAL AOJUSTUENT OF THE FIXED BLADE AS SHOWN. RETIGHTEN THE (2) SCREWS 33-3210-06. TRY LOWERING THE UOVABLE BLADE SLOWLY (WITHOUT THE AIR BEING ON) FOR TESTING THE SHEARING ACTION. IT UAY REQUIRE SEVERAL ADJUSTMENTS TO GET EXACTLY YOUR CUTTING NEEDS.
02-0264-01 --~ AIR CYLINDER
02-0265-01 __ ___, CLEVIS
02-0268-01 FIXED BLADE
JJ-2210-0J SET SCREWS
02-0273-01 SPACER
02-0267-01 fixed blade support
(with radial) adjustment
.003/.005 fAR SIDE OF F'IXEO BLADE'S RADIAL ADJUSTMENT fOR A SCISSOR UI<E CUT.
.33-3210-06 mounting screw
02-0268-0~ FIXED BLADE MACHINE HORN
3.3-.3210-06 "' SCREW rs 02-0267-01
i:! STATIONARY 33-2210-03 BLADE SUPPORT SET SCREW
INS-570-30
fiLTER, OILER, REGULATOR. GAUGE ASSEMBLY 80-0181-01
J0-021!2-01 GAUGE
80-0181-10
I JJ-2010-12 SCREW P.H.S.M.S.
J0-1048-01 OUICK DISCONNECT FEMALE
* NOTE: SEE INS-DRAWINGS 2100-1 NfO 2100-2 F'OR SPARE PARTS
KNEE SWITCH
ML 117VS-6-JA
AIR CIRCUIT DIAGRAM MODEL 1 17VS KS
MODEL 117VS f.O.R.C.-I<S
REO
YELLOW CUTTER
CYLINDER 117VS
YELLOW
33-3712-15 DOWEL PIN
J0-2737-2 FITTING
01-.. 410-01 BUTTON J0-01102-01 SPRING
FILTER. OILER REGULATOR &
CAUGE
INS-SUI-I~
4 WAY AIR VAI..VE, KNEE OPERATED 80-0185- 01
01-1539-01 SUPPORT
33-2010-16 (J) SCREW-P.H.S.M.S.
J0-0886-01 AIR VALVE
30-2738-250 ELBOW
33-0106-20 SCREW-P.H.Ioi.S.
01-4412-01 ROD
30-0228-01 KNEE PLATE
30- 0902- 01 KNEE PAD
From the library of: Superior Sewing Machine & Supply LLC
10-1533-01 SUPPORT
33-1716-02 FLAT WASHER
30-2962-01 DISC SPRING
33-1616-02 HEX NUT 33-1708-01 FLAT WASHER
33-0108-06 SCREW P .H.t.4.S.
CUTIER ASSEMBLY MODEL 117VS
PEGASUS FS613 80-0539-04
ML 117VS-6-4A
02-0283-01 FACE PLATE
EXISTING SCREW
33-1810-01 LOCK WASHER
33-3210-06 SCREW S.H.C.S.
33-4220-06 SCREW S.H.S.S.
02-0264-01 AIR CYLINDER
33-1516-02 HEX NUT
02-0272-01 MOVABLE BLADE SUPPORT
01-2219-03 BUSHING
33-3116-16 SCREW S.H.C.S.
33-0305-04 SCREW F'.H.M.S.
02-0271-01 MOVABLE BLADE
02-0265-01 CLEVIS
10-1534-01 ---------33-2210-03 GUARD
02-0268-01----. STATIONARY BLADE '------33-1805-01-------......., LOCK WASHER
33-3105-04 SCREW S.H.C.S.
33-3210-06 SCREW S.H.C.S.
SCREW S.S.S.
02-0267-01 STATIONARY BLADE SUPPORT
u~---02-0273-01 SPACER 30-2829-01 SCREW S.H.C.S.
From the library of: Superior Sewing Machine & Supply LLC
