Date post: | 23-Jan-2018 |
Category: |
Documents |
Upload: | ruben-andeweg |
View: | 428 times |
Download: | 5 times |
The most comfortable air-conditioning systems for yachts and superyachts
Chiller and self contained systems
2Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
With over 20 years of experience in mobile climate systems (marine, automotive, military etc.) a team of technical specialists came to the conlcusion that the available marine air-conditioning systems did not live up to the demands of boatbuilders and yacht owners.
Available technologies like inverter technology (which is used in conventional air-conditioning systems) where introduced in marine air-conditioning systems over a decade later! Noisy compressors with huge start loads and noisy fans (with poor airflow) were fitted in the most modern superyachts.
We wanted to develop a reliable, high quality, easy to install and user friendly air-conditioning system with great performance and with optimal climate comfort. This meant the beginning of Clion-Marine.
Clion-Marine is born as a Joint-Venture between two companies who have proven therselves as mobile climate control specialists. All the Clion-Marine systems are engineered, developed and produced within The Netherlands and Germany where quality is more than standard.
INTRODUCTION TO CLION-MARINE
Air outlets airhandlers in a yacht
3Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
We do not only provide the equipment, but we also support our customers with heat load calculations, system drawings, supervision and commissioning. Our HQ is based in The Netherlands and we have dealers and service points worldwide to optimize the support to our clients worldwide.
ENGINEERING, INSTALLATION, COMMISSIONING AND SERVICE
4Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
The Clion-Marine chiller systems are reverse cycle inverter driven chillers. This means no peak load during the start-up and an automatic capacity modulation based on the demand of heat load. All the Clion-Marine chillers are made of a solid stainless steal housing which ensures an extreme silent operation and which looks very clean in every engine room.
The completely EMC protected control box has a prewired cable loom and mounting bracket for easy installation near the chiller. If you’re on low shore supply, pressing the ECO icon on the full colour touchscreen will limit the chillers electrical load. The status icon on the touchscreen will give you any information you need on water temperature (seawater in/out, chilled water in/out), status running mode and even the refrigerant pressure. The status screen is a very simple and unique tool for engineers to check the system status and will give any information needed for service and support.
An ideal feature for engineers on bigger yachts to check the system. An external diesel heater or electrical heater can easily be integrated in the system. The connection for an external heater is standard provided in our control box.
CENTRAL MONITORING SYSTEMAll our chillers are standard equipped with a connection for easy integration with the central monitoring system on board.
CLION-MARINE CHILLER SYSTEMS
Example of a chiller system in a yacht
Setpoint
Air
Water
Valve
AH-N16.0
17,0 °C
19,5 °C
10,1 °C
on
EL. Heat off
Sea_Out
Sea_In
Circ_In
Circ_Out
Pressure
Freq
Status
Alarm
34,4 °C
33,2 °C
14,0 °C
09,5 °C
08,1 Bar
83 Hz
1
00 000 51
Chiller status display
5Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
SPECIFICATIONS CHILLER SYSTEMS
CH-IN 31.0 - 87.0CH-IN 31.0 CH-IN 51.0 CH-IN 87.0
Part number CM0000113167 CM0000113174 CM0000113186
Capacity (BTU/h) 9,300-31,300 16,300-51,500 27,500-87,000
Capacity (kW) 2.9-9.2 4.7-15.1 8.0-25.5
Voltage ±10% 200-240/50/60Hz/1Ph 200-240/50/60Hz/1Ph 380-480V/50/60Hz/3Ph
Power consumption (A) 4.03-11.6 4.7-15.1 3.17-9.57
Dimensions (MM) 564*360*455 564*360*455 564*360*518
Dimensions CB (MM) 340*245*250 340*245*250 340*245*273
Weight (KG) 51.00 56.00 71.00
Chiller unit
Chiller model identification:CH = CHILLER, IN = INVERTER, NR = CHILLER CAPACITY (BTU/H)
CH-IN 270.0CH-IN 270.0
Part number CM0000114063
Capacity (BTU/h) 78,000-270,000
Capacity (kW) 22.75-79.0
Voltage ±10% 380-480V/30/90Hz/3Ph
Power consumption (A) 23,8 - 30,4
Dimensions (MM) 890*836*730
Weight (KG) -
6Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
The Clion-Marine airhandlers are equipped with a high velocity, but very silent, boxblower with a DC speed control. Our airhandlers have a unique controlling system which guarantees an extremely short cool down time (when there is a high temperature on board). After reaching the setpoint the fans will modulate to an very silent operation with proper airflow.
CLION-MARINE AIRHANDLERS
All controlboxes have automatic fuses and a prewired cable loom with connectors and prewired sensors for fast installation.Full colour displays with Vimar compatible bezels are standard to control the system.A unique status icon will give you all information you need on the chilled water temperature, setpoint, valve status etc. ideal for engineers on bigger yachts to check the system.
There are 3 types of airhandlers to cover the whole range (4,000-26,000 BTU/h). When more capacity is needed, because of restricted ducting or small grills, the units can easily be upgraded by defining antother type in the control system. This is also an advantage for interior designers when an existing boatdesign will be used in extreme climates. The capacity can easily be upgraded without changing the interior layout!
Setpoint
Air
Water
Valve
AH-N16.0
17,0 °C
19,5 °C
10,1 °C
on
EL. Heat off
Three different airhandlers
Airhandler status display
7Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
AH-N4.0-9.0Part number CM0000113093
Capacity (BTU/h) 4,000 6,000 9,000
Capacity (kW) 1.2 1.8 2.6
Voltage ±10% 220V/50/60Hz 220V/50/60Hz 220V/50/60Hz
Power consumption (A) 0.75 0.75 0.75
Dimensions (MM) 400*208*289 400*208*289 400*208*289
Weight (KG) 8.90 8.90 8.90
SPECIFICATIONS AIRHANDLERS
AH-N 12.0-16.0Part number CM0000113100
Capacity (BTU/h) 12,000 14,000 16,000
Capacity (kW) 3.5 4.1 4.7
Voltage ±10% 220V/50/60Hz 220V/50/60Hz 220V/50/60Hz
Power consumption (A) 0.75 0.75 0.75
Dimensions (MM) 501*230*391 501*230*391 501*230*391
Weight (KG) 14.60 14.60 14.60
AH-N 18.0-26.0Part number CM0000113109
Capacity (BTU/h) 18,000 24,000 26,000
Capacity (kW) 5.3 7.0 7.6
Voltage ±10% 220V/50/60Hz 220V/50/60Hz 220V/50/60Hz
Power consumption (A) 0.75 0.75 0.75
Dimensions (MM) 614*235*340 614*235*340 614*235*340
Weight (KG) 16.70 16.70 16.70
AH-S 4.0-9.0Part number CM0000113098
Capacity (BTU/h) 4,000 6,000 9,000
Capacity (kW) 1.2 1.8 2.6
Voltage ±10% 220V/50/60Hz 220V/50/60Hz 220V/50/60Hz
Power consumption (A) 0.75 0.75 0.75
Dimensions (MM) 426*343*249 426*343*249 426*343*249
Weight (KG) 10.0 10.0 10.0
Airhandler model identification:AH = AIRHANDLER, N = NORMAL, S = SLIM LINE, NR = AIRHANDLER CAPACITY (BTU/H)
8Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
The Clion-marine SC-N self contained units are stand-alone operated units equipped with a high velocity, but very silent, boxblower with DC speedcontrol. Up to 3 air ducts can be connected to each unit, without the use of splitters. After reaching the setpoint the fans will modulate to an extremely silent operation with proper airflow.All controlboxes have automatic fuses and a prewired cable loom with connectors and prewired sensors for extreme fast installation. Full colour displays with Vimar compatible bezels are standard to control the system. A unique status icon gives you all information you need on the temperatures, setpoint, status etc..
CENTRAL MONITORING.The units are standard equipped with a connection for easy integration to the central monitoring system on board.
CLION-MARINE SELF CONTAINED SYSTEMS
SC-W WALL MOUNTED SELF CONTAINED UNIT.The unique SC-W wall mounted unit is an ideal solution to cool wheelhouses in commercial vessels, tenders etc. The solid slim stainless steel housing is designed for easy installation in the wheelhouse and has an integrated display. A double boxblower fan guarantees extremely high velocity air flow to distribute cooling through the entire wheelhouse.
Self-Contained unit Self-Contained wall model
9Clion-Marine | +31 (0)186 621955 | [email protected] | www.clionmarine.com
At Clion-Marine we can supply you all the accessories for your air-conditioning system. We can also provide your air-conditioning system with a heating system, for a perfect climate on board!
Interested in a Clion-Marine system, or maybe you have some (technical) questions? We have sales and service points throughout the world . Do not hesitate to contact our sales department at [email protected].
CLION-MARINE ACCESSOIRES CLION-MARINE WORLDWIDE
SC-N SC-N 11.0 SC-N 18.0 SC-N 28.0
Part number CM0000113122 CM0000113128 CM0000113133
Capacity (BTU/h) 11,000 18,000 28,000
Capacity (kW) 3.2 5.2 8.2
Voltage ±10% 200-240/50/1Ph 200-240/50/1Ph 200-24W0/50/1Ph
Power consumption (A) 2.89 4.53 7.34
Dimensions (MM) 490*262*329 571*318*381 571*318*381
Weight (KG) 28.50 37.60 40.70
SPECIFICATIONS SELF CONTAINED
SC-WSC-W 28.0
Part number CM0000113151
Capacity (BTU/h) 28,000
Capacity (kW) 8.2
Voltage ±10% 220V/50/1Ph
Power consumption (A) 1.5
Dimensions (MM) 800*275*851
Weight (KG) -
Selfcontained model identification:SC = SELF-CONTAINED, N = NORMAL, W = WAND MODEL, NR = SELF-CONTAINED CAPACITY (BTU/H)
NETHERLANDSMarconistraat 2NL-3281 NB Numansdorp+31(0)186 [email protected]
You can also find us on:
linkedin.com/company/clion-marine
@clionmarine