Closing: 18 June 2019 from 14:00 hrs. · General terms and condi ons of the online auc on Closing...

Online auc�on machinery and inventory on formerloca�on COOP Värmland in Karlstad (SE)

Closing: 18 June 2019 from 14:00 hrs.

Viewing day:

Address:Timmergatan 8652 26 KarlstadSweden

General terms and condi�ons of the online auc�on

Closing date 18 June 2019 from 14:00 hrs. ViewingOrganizing Company Industrial Auc�ons BV

Looyenbeemd 115652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208Fax: +31 (0)40 2409 209E-mail: info@industrial-auc�ons.com

Buyers premium 18% over the highest bidV.A.T 25% over the highest bid including PremiumPickup date 26 June 2019 from 09:00 �ll 16:00 hrs.Pickup address Timmergatan 8

652 26 KarlstadSweden

Delivery instruc�ons The buyer is fully responsible for the dismantling, loading andtransporta�on of the bought lots. Industrial Auc�ons B.V. cannot acceptany responsibility unless indicated otherwise. The delivery (pick-upbought lots) will only take place on the men�oned delivery date/�me andaddress.

Payment details Before collec�on of the goods your payment has to be fulfilled. It ispossible to transfer the amount due to our account with ING-bank,account number 005033999 in Best, IBAN: NL34INGB0005033999, BIC:INGBNL2A or to our account at Rabobank, account number 157198367 inBest, IBAN: NL80RABO0157198367, BIC: RABONL2U, Gladbacher Bank AG,Iban: DE83310601818887176010, BIC: GENODED1GBM, indica�nginvoice- and customernumber.

General terms andcondi�ons of sale

On the auc�on general terms and condi�ons of the online auc�on areapplicable concerning the (possible) purchase of moveable assets,furthermore these specific terms and condi�ons.

Combina�ons All lots in a combina�on will be sold individually first. The star�ng bid ofthe combina�on is the total amount of the individual bids. Thecombina�on will open a�er all individual lots are closed. If thecombina�on is sold it overrules the individual bids, if not the individualbids are applicable.

Prolonga�on If a bid is made in the last 5 minutes the lot closes, the closing �me of thatlot will be extended with 5 minutes un�l no bids are made.

www.industrial-auc�ons.com

mailto:[email protected]

Nr Title Descrip�on Start €

1 Tetra Laval FoodKoppens B.V.

Tetra Laval Food Koppens B.V. mobile forming machine, type:VM 400 HSE, machine number: VM 400 HSE-1715, 380 V, 3 Ph,50 Hz, 16.57 A, 7.67 kW, weight: 1130 kg, dimensions forms:(2x) 170 mm x 115 mm (oval shaped), s/s mesh belt, beltwidth: 400 mm, total dimensions: 2400 mm x 1020 mm x 2700mm.

5500

2 KoppensMachinefabriekB.V.

Koppens Machinefabriek B.V. mobile ba�ering machine, type:ERT 400, machine number: ERT 400-52, 380 V, 3 Ph, 50 Hz, 4.2A, 1.46 kW, weight: 160 kg, s/s mesh belt, belt width: 400 mm,total dimensions: 1750 mm x 750 mm x 1120 mm.

1250

3 Tetra Laval FoodKoppens B.V.

Tetra Laval Food Koppens B.V. mobile breading machine, type:PU 400, machine number: 1009, year of construc�on: 1994,380 V, 3 Ph, 50 Hz, 5.35 A, 1.48 kW, weight: 563 kg, s/s meshbelt, belt width: 400 mm, total dimensions: 3200 mm x 1100mm x 2100 mm.

2250

4 KoppensMachinefabriekB.V.

Koppens Machinefabriek B.V. fryer, type: BR 2000/400,machine number: BR 2000/400-566, 380 V, 3 Ph, 50 Hz, 69 A,45 kW, weight: 950 kg, s/s mesh belt, belt width: 400,clearance: 420 mm x 90 mm, total dimensions: 1400 mm x1150 mm x 3200 mm.

8500

5 Inotec Inotec mobile emulsifier, type: 175CD 66, machine number:0108.STD 109, year of construc�on: 2004, 400 V, 50 Hz, 66 kW,weight: 650 kg, plate diameter: 175 mm, total dimensions:1800 mm x 1100 mm x 1050 mm. Including plas�c crate withknifes and plates.

4500

6 Fischer LabellingMachines A/S

Fischer labelling machines A/S mobile labeling machine, type:E�ketanlag, order number: 4187, year of construc�on: 2007,400 V, 50 Hz, 16 A, with Fischer labeler, type: F8000 MDI,machine number: 1850, order number: 4187, year ofconstruc�on: 2007, 230 V, 50 Hz, 10 A, with Elmoprint smartdate head, belt width: 290 mm, total dimensions: 2100 mm x1100 mm x 1580 mm.

1250

7 G. MondiniS.p.A.

G. Mondini S.p.A. traysealer, type: CV/VG-S, serial number:1575-B/99, year of construc�on: 28-04-1999, 380 V, 3 Ph, 50Hz, dye: (2X) 140 mm x 210 mm, total dimensions: 1150 mm x930 mm x 1650 mm. With pallet box with extra dye sets:dimensions dye: (1x) 160 mm x 220 mm ( oval shaped twocompartments) and (2x) 140 mm x 180 mm (oval shaped).

2900

8 Mul�vac Mul�vac thermoformer, type: R530, machine number: 3458,year of construc�on: 2004, 400 V, 3 Ph, 50 Hz, 17 kW, 41 A,film width: 520 mm, belt width: 480 mm, total dimensions:7000 mm x 1150 mm x 1960 mm. Including pallet box withparts, dimensions: 1200 mm x 800 mm x 350 mm.

9500


9 Delford-Sortaweight Ltd

Delford-Sortaweight Ltd checkweigher, model: INT Delford,serial number: INT 044, year of construc�on: 2003, 230 V, 50Hz, 3 A, maximum weight: 3000 gram, minimum weight: 40gram, e= 2 gram, t= - (- E kg), temperature range: 0 - 35°C, beltspeed: 0.2 - 0.5 M/S, last checked: 13.6.13, belt width: 195mm, total dimensions: 1120 mm x 700 mm x 1540 mm.

950

10 Palmia Palmia mixer-grinder, type: DMM 1500 1, number: 4480,double sha� ribbons, plate diameter: 210 mm, totaldimensions: 3250 mm x 1250 mm x 1780 mm. Including s/strolley, dimensions: 1150 mm x 600 mm x 950 mm.

6900

11 Treif Treif slicer, type: 1920, machine number: 192001.61303.0273,year of construc�on: 1994, 380/220 V, 50 Hz, 7/16 A, 2.5 kW,weight: 195 kg, dimensions chamber: 220 mm x 240 mm, totaldimensions: 1850 mm x 1860 mm x 1480 mm. Including extraknife.

2900

12 ELS ELS mobile labelling machine, model: AK2-EB-SCBS201,machine number: 10738/2014, 230 V, 50/60 Hz, 350 VA,dimensions: 660 mm x 810 mm x 830 mm.

750

13 Antonioborgo Antonioborgo mobile legatrice tying machine, type: AB41B,serial number: 11401, year of construc�on: 2001, 380 V, 50 Hz,0.55 kW, diameter infeed: 50 mm, total dimensions: 1100 mmx 550 mm x 2400 mm.

600

14 Ross IndustriesInc.

Ross Industries Inc. mobile slicer, model: 950-6, serial number:1560, year of construc�on: 04-2006, 380/415 V, 3 Ph, 50 Hz,20/13/8 A, plas�c mesh belt, belt width: 175 mm, totaldimensions: 1700 mm x 900 mm x 2250 mm.

1950

15 Belam B.V. Belam B.V. mobile tenderizer, type: IT-3, machine number:8610-04101, 380 V, 50 Hz, working width: 340 mm, belt width:290 mm, total dimensions: 1180 mm x 950 mm x 140 0mm.

1250

16 TreifMaschinenbauGmbH

Treif Maschinenbau GmbH slicer, type: 91/1, machine number:120311/2016-1, year of construc�on: 1981, 380/220 V, 50 Hz,3.6/10 A, dimensions chamber: 150 mm x 200 mm, totaldimensions: 1580 mm x 700 mm x 1200 mm.

950

17 Sydmekano AB Sydmekano AB transport belt, serial number: 142-A, year ofconstruc�on: 2012, plas�c belt, belt width: 505 mm, workingwidth: 450, total dimensions: 700 mm x 1630 mm x 1170 mm.

150

18 Garos Garos ham press, type: GH-222, serial number: 62013,diameter chamber: 120 mm, total dimensions: 2100 mm x 400mm x 1150 mm. Including extra chamber, diameter: 100 mm.

500

19 Handtmann Handtmann vacuum filling machine with li�er for 200 litermeat bins, type: VF200B, number: 3436, 220 V 50 Hz, 32.8 A,6.5 kW, filling, por�oning and linking, dimensions: 2100 mm x1750 mm x 1300 mm.

3500

20 Townsend Townsend mobile linking and hanging line, type: NL 17 smartlinker, serial number: 4417, year of construc�on: 2001, 380 V,3 Ph, 50 Hz, dimensions linking machine: 2480 mm x 650 mm x1840 mm, dimensions hanging line: 3700 mm x 870 mm x1450 mm.

2500


21 Garos Garos injector and tenderizer, type: GTH 128/576, machinenumber: 3977018, year of construc�on: 1997, 400 V, 50 Hz, 6bar, 1670 kg, 128 needles, clearance: 550 mm x 310 mm,width s/s walking beam: 550 mm, total dimensions: 3200 mmx 920 mm x 2170 mm, including 200 liter meat bin with filterand mobile transport belt, s/s frame, plas�c mesh belt, beltwidth: 600 mm, total dimensions: 700 mm x 880 mm x 1100mm.

3750

22 NN transportbelt

Mobile transport belt, s/s frame, plas�c mesh belt, belt width:600 mm, total dimensions: 700 mm x 880 mm x 1100 mm.

150

23 Fomaco Fomaco injector, model: FGM 160, machine number: 46191994, 415 V, 50 Hz, 11.5 A, 4.6 kW, 15/70 strokes per minute,s/s walking beam, width beam: 560 mm, clearance: 560 mm x300 mm, total dimensions: 2500 mm x 1150 mm x 2300 mm,including mobile filter, dimensions: 1200 mm x 1000 mm x1100 mm.

3250

24 Furhoffs Furhoffs s/s hose reel with hose, dimensions: 500 mm x 300mm x 150 mm.

15

25 Alfa Laval Alfa Laval evaporator, type: FKG-8240-L-3-R3/4-B, opera�ngtemperature: -/+ 100 °C, -1/25 bar, 41 kg, dimensions: 2500mm x 850 mm x 600 mm.

75

26 Alfa Laval Alfa Laval evaporator, type: FKG-8240-L-3-R3/4-B, opera�ngtemperature: -/+ 100 °C, -1/25 bar, 41 kg, dimensions: 2500mm x 850 mm x 600 mm.

75

27 Alfa Laval Alfa Laval evaporator, type: FKG-8240-L-3-R3/4-B, serialnumber: SA-1201-0500003380-1091-27235, year ofconstruc�on: 2012, opera�ng temperature: -/+ 100 °C, -1/25bar, 41 kg, dimensions: 2500 mm x 850 mm x 600 mm.

75

28 Alfa Laval 2 Alfa Laval evaporators, type: FKG-8240-L-3-R3/4-B, serialnumber: SA-1201-0500003380-1088-27232, year ofconstruc�on: 2012, opera�ng temperature: -/+ 100 °C, -1/25bar, 41 kg, dimensions: 2500 mm x 850 mm x 600 mm andtype: FKG-8240-L-3-R3/4-B, serial number:SA-1201-0500003380-1089-27233, year of construc�on: 2012,opera�ng temperature: -/+ 100 °C, -1/25 bar, 41 kg,dimensions: 2500 mm x 850 mm x 600 mm.

150

29 Garos Garos ham press, type: GHL 222, serial number: 22018,diameter chamber: 120 mm, total dimensions: 2200 mm x 600mm x 1200 mm. Including 3 forms, diameter: 180 mm, 170mm and 125 mm.

625

30 Magurit Magurit frozen block cu�er, working width: 760 mm, totaldimensions: 1950 mm x 930 mm x 1790 mm.

1750

31 NN emulsifier Mobile emulsifier, plate diameter: 250 mm, dimensionshopper: 1200 mm x 1200 mm x 650 mm, total dimensions:2500 mm x 1250 mm x 1130 mm. Including plas�c crate withplates.

1750



Treif Maschinenbau GmbH slicer, type: 1860, machinenumber: 186004.61447.0073, year of construc�on: 1997,400/230 V, 50 Hz, 6.4/16 A, 2.6 kW, weight: 198 kg,dimensions chamber: 175 mm x 190 mm, total dimensions:1850 mm x 780 mm x 1300 mm.

2900

33 Industrily�en Industrily�en li�er for E-2 crates, type: IL 100 P, serial number:242, year of construc�on: 2002, maximum weight: 150 kg,crate size: 600 mm x 400 mm, maximum li�ing height: 800mm, total dimensions: 800 mm x 500 mm x 1850 mm.

150

34 Garos Garos net loader, type: GHL223, machine number: 721120,year of construc�on: 1997, diameter: 180 mm, totaldimensions: 1000 mm x 600 mm x 1750 mm.

200

35 Industrily�enAB

Industrily�en AB crate li�er, type: 1L100P, serial number: 202,eleva�ng height: 750 mm, total dimensions: 700 mm x 540mm x 180 mm.

125

36 KG Ly�en KG Ly�en crate li�er, type: PB100P75, number: 5043, eleva�ngheight: 800 mm, total dimensions: 800 mm x 650 mm x 1750mm.

125

37 Garos Garos net loader, type: SH 223, serial number: 63022,diameter net: 130 mm, total dimensions: 550 mm x 450 mm x1750 mm.

200


Treif Maschinenbau GmbH slicer, model: Puma CE 700 EB,machine number: 194309.61809.100412, year of construc�on:2005, 230/400 V, 3 Ph, 50 Hz, 3.4 kW, 8.2/16 A, weight: 305 kg,dimensions chamber: 230 mm x 220 mm, belt width: 230 mm,total dimensions: 2950 mm x 950 mm x 1550 mm.

3500

39 NN pla�orm S/s pla�orm, dimensions: 600 mm x 400 mm x 140 mm. 10

40 TELTEK IÖREBRO AB

TELTEK I ÖREBRO AB movable transport belt, type: TELTEK,serial number: 104053, year of construc�on: 2004, 230 V,50-60 Hz, belt width: (3x) 110 mm, total dimensions: 1200 mmx 560 mm x 960 mm. Including 2 extra belts, belt width: (2x)175 mm.

150

41 Detectronic Detectronic metal detector head, model: 606, serial number:606-350-148, clearance: 850 mm x 170 mm, total dimensions:1200 mm x 360 mm x 430 mm.

350

42 FTC FTC fresh meat slicer, model: 300, serial number: 302, year ofconstruc�on: 1999, 400 V, 3 Ph, 50 Hz, 3 kW, 125 kg, 32 knifes,distance between knifes: 8 mm, total dimensions: 1000 mm x750 mm x 1700 mm.

1150

43 Grasselli Grasselli automa�c skinning and derinding machine, model:AB 520 DD, serial number: 01/009/1002, year of construc�on:2000, 380 V, 50 Hz, working width: 520 mm, plas�c belt, beltwidth: 515 mm, total dimensions: 1850 mm x 1000 mm x 1350mm.

1250

44 Maja Maja mobile automa�c skinning and deriding machine, type:VBA 5550, serial number: 44175, year of construc�on: 2004,400 V, 3 Ph, 50 Hz, 2.8 A, 1.1 kW, plas�c belt, belt width: 500mm, total dimensions: 1000 mm x 2100 mm x 1500 mm.

1900


45 NN tumbler Mobile tumbler with scraper, dimensions drum: diameter: 590mm, height: 550 mm, total dimensions: 800 mm x 730 mm x1480 mm.

450

46 Technopack Technopack mobile clipper, model: TCEA.500, number: 57789,dimensions: 750 mm x 700 mm x 1900 mm.

1000

47 Technopack Technopack mobile double clipper, model: DCA-E/3020,dimensions: 1280 mm x 780 mm x 1850 mm.

950

48 Technopack Technopack mobile double clipper, type: DCA-E6.323.199,plas�c ou�eed rollers, roll width: 100 mm, total dimensions:1150 mm x 800 mm x 1800 mm.

1250

49 Hoegger AlpinaAG

Hoegger Alpina AG double clipper, type: DKF 18/15, machinenumber: 848783, 400 V, 3 Ph, 50 Hz, 7 A, 6 bar, plas�c belt,belt width: 65 mm, total dimensions: 1100 mm x 1500 mm x1800 mm.

1900

50 Tagprint Tagprint mobile labelling machine, type: Tagprint S60,dimensions: 600 mm x 620 mm x 1310 mm.

350

51 AEWEngineering CoLtd

AEW Engineering Co Ltd por�oning saw, type: A.P.S., serialnumber: 40980153, 400 V, 3 Ph, 50 Hz, weight: 1130 kg, plas�cbelt, belt width: (2x) 150 mm, total dimensions: 1400 mm x2200 mm x 2620 mm.

1500

52 NN curveconveyor

90° curve conveyor with s/s frame, plas�c belt, belt width: 310mm, total dimensions: 700 mm x 680 mm x 950 mm.

150

53 Treif Treif mobile slicer, model: Zebra-CE, type: 450 0, clearance:650, distance between knifes: 50 mm, total dimensions: 1400mm x 1050 mm x 1700 mm. Including tool trolley, dimensionstrolley: 930 mm x 790 mm x 1250 mm.

1900

54 Carso Carso por�oning machine, year of construc�on: 1995, 380 V, 3Ph, 0.11 kW, diameter clearance: 120 mm, with eleva�ng belt,plas�c belt, plas�c rollers, belt width: 240 mm, roller width:280 mm, li�ing height: 1550 mm, total dimensions: 2550 mm x400 mm x 1550 mm.

375

55 NN curveconveyor

Mobile 90° curve conveyor, s/s frame, plas�c chain belt, beltwidth: 140 mm, total dimensions: 1500 mm x 1700 mm x1200.

125

56 NN labellingmachine

Labelling machine, s/s frame, roller width: 230 mm, 300 mm,400 mm, total dimensions: 1500 mm x 850 mm x 1800 mm.

200

57 NN cube-perforator

Mobile cube-perforator, s/s mesh belt, belt width: 710 mm,working width: 670 mm, total dimensions: 1430 mm x 1300mm x 1430 mm.

1250

58 Formax Formax mobile cube-perforator, model: MC 27, serial number:231, 380 V, 3 Ph, 60 Hz, 1.83 A, 1.2 kW, s/s mesh belt, beltwidth: 710, working width: 670, total dimensions: 1300 mm x1260 mm x 1400 mm.

1500

59 Safeline Safeline mobile metal detector with rejecter, model: Signature,100-240 V, 50/60 Hz, 330 W, belt width: 530 mm, eleva�ngheight: 1140 mm, clearance: 569 mm x 147 mm, lastcalibra�on: 05.2016, total dimensions: 1950 mm x 1500 mm x1300 mm.

700


60 KG Ly�en KG Ly�en AB li�er for 200 liter meat bins, type: SKV200M1PKVR, number: 2563, eleva�ng height: 2000 mm, totaldimensions: 1050 mm x 900 mm x 2800 mm.

750

61 Wol�inggrinder

Wol�ing grinder, type: C.200-UNI, number: 50943, platediameter: 200 mm, total dimensions: 1700 mm x 900 mm x1700 mm.

2750

62 Handtmann Handtmann mobile linker, type: 226-01, number: 388, year ofconstruc�on: 2006, 400 V, 3 Ph, 50 Hz, 9 A, 5 kW, dimensions:1700 mm x 800 mm x 1400 mm.

1500

63 Ilpra Ilpra mobile traysealer, machine serie: Foodpack, model:Speedy V/G, serial number: FP6232, year of construc�on:2004, 380 V, s/s ou�eed roller conveyor, dye: 220 mm x 160mm, roller width: 400 mm, total dimensions: 2460 mm x 800mm x 1460 mm. Crate with oval dye: 220 mm x 160 mm anddye: (1x) 295 mm x 140 mm. Without vacuum pump.

2900


Treif Maschinenbau GmbH slicer, type: 1910, machinenumber: 191002.61247.0290, year of construc�on: 1993,220/380 V, 3 Ph, 50 Hz, 7/16 A, dimensions chamber: 220 mmx 230 mm, total dimensions: 2500 mm x 900 mm x 1300 mm.

950

65 Risco Risco vacuum filling machine with li�er for 200 liter meat bins,model: RS5000, serial number: 590003, year of construc�on:1990, total dimensions: 2150 mm x 1150 mm x 1980 mm.

1750

66 Townsend Townsend mobile linking and hanging line, consis�ng of:Townsend mobile linker, model: DB6A, serial number: 2842,380 V, 3 Ph, 50 Hz, 4.7 A, dimensions: 1550 mm x 600 mm x1350 mm and mobile hanging line, dimensions: 2450 mm x450 mm x 1980 mm. Linker incomplete.

1250


Treif Maschinenbau GmbH dicer, type: 74/2, machine number:52309S / 2011-1, year of construc�on: 1980, 380/220 V, 3 Ph,50 Hz, 11/16 A, dimensions chamber: 110 mm x 110 mm, totaldimensions: 1950 mm x 820 mm x 1800 mm. Including E2crate with extra grids.

1250

68 RMF RMF vacuum bag sealer, model number: SV 453, serialnumber: 315, seal length: 1150 mm, total dimensions: 1350mm x 770 mm x 2200 mm. Without vacuum pump.

750

69 Teraoka SeikoCo., LTD.

Teraoka Seiko Co., LTD. semi-automa�c weighing, wrappingand labelling machine, model: X-3600, serial number:00164079, 400 V, 3 Ph, 50/60 Hz, 1.5 kW, dimensions: 920 mmx 860 mm x 1400 mm.

400

70 Teraoka SeikoCo., LTD.

Teraoka Seiko Co., LTD. semi-automa�c weighing, wrappingand labelling machine, model: FX-3600 XL, serial number:96161745, 380 V, 3 Ph, 50/60 Hz, 1.5 kW, maximum weight:3/6 kg, minimum weight: 20 gram, 2= 0.5 gram, T= -0.999 kg,dimensions: 1000 mm x 1050 mm x 1420 mm.

450


72 NantsuneIronworks

Nantsune Ironworks slicer, 35 knifes, clearance: 370 mm x 160mm, working width: 340 mm, distance between knifes: 10mm, total dimensions: 1660 mm x 720 mm x 1560 mm.Including s/s trolley with extra knife set, 33 knifes, workingwidth: 340 mm, distance between knifes: 11 mm, 1 brokenknife.

1500

73 Katridg Pak Co. Katridg Pak Co. Anyl-ray fat analyzer, model: M201-4, serialnumber: F-8, year of construc�on: 08-1987, 220 V, 50 Hz, 1 Ph,1.0 A, 1000 Amps max, dimensions pipe: 200 mm x 200 mm x230 mm, total dimensions: 670 mm x 500 mm x 1720 mm.

100

74 Scanio A/S Scanio A/S fat analyzer, type: scanalyse, serial number: 23,year of construc�on: 1997, 3x 400 V, 50 Hz, 3.0 A, dimensionspipe: 200 mm x 200 mm x 320 mm, total dimensions: 720 mmx 800 mm x 1800 mm.

450

75 Rühle Rühle mobile dicer, type: SR1, number: 1453, year ofconstruc�on: 2002, 400 V, 50 Hz, 16 A, 3/1.5 kW, dimensionschamber: 100 mm x 100 mm, total dimensions: 1000 mm x580 mm x 1100 mm.

1750

76 Grasselli Grasselli mobile skinning machine, model: A 35, serial number:090291, year of construc�on: 1999, 380 V, 3 Ph, 50 Hz, 1.2 A,working width: 320 mm, foot control, total dimensions: 550mm x 500 mm x 950 mm.

650

77 Grasselli Grasselli skinning machine, working width: 490 mm, totaldimensions: 800 mm x 600 mm x 1050 mm.

500

78 Idesta Idesta cooling counter, model: Salladvagn KPL, serial number:244 70 196, 220-240 V, 50 Hz, 1 Ph, 50 Hz, 10 A, refrigerant:R134a, volume: 300 g, dimensions: 2100 mm x 800 mm x 1430mm.

50

79 Intercut Intercut packaging machine, model: 80, 220 V, 100 W, filmwidth: 460 mm, total dimensions: 700 mm x 650 mm x 1000mm.

20

80 Intermec Intermec label printer, model: Printer 201, model number:1-202010-13, serial number: 54370, 115/230 V, 50/60 Hz,2.6/1.3 A, dimensions: 560 mm x 220 mm x 500 mm.

15

81 Tork Tork paper dispenser, dimensions: 320 mm x 320 mm x 420mm.

5

82 UBI S/s trolley with UBI label printer, type: 501, serial number:12898, 115/230 V, 3 Ph, 50-60 Hz, 2.6/1.3 A, and Flintab ABmonitor, model: Microline 463, total dimensions: 550 mm x900 mm x 1900 mm.

25

83 NN Crates 3 plas�c rollies with 23 crates, dimensions rollies: (3x) 620 mmx 420 mm x 160 mm, dimensions crates: (23x) 600 mm x 390mm x 210 mm.

25


84 Bizerba /Intermec / UBI

Bizerba / Intermec / UBI weighing and labelling system,consis�ng of: Bizerba weighing scale, type: EW 300, number:1730458, max: 3/6 kg, min: 20 grams, e=1/2 grams,dimensions scale: 260 mm x 335 mm, including Intermec labelprinter, model: 501 XP, serial number: 15800601913, 100-240V, 50-60 Hz, 2.5/1.2 A, total dimensions: 600 mm x 1000 mm x1580 mm. Missing labellers.

150

85 NN trolley S/s trolley, dimensions: 340 mm x 340 mm x 650 mm. 5

86 NN trolleys 2 s/s trolleys, dimensions: (1x) 1300 mm x 680 mm x 220 mmand (1x) 1080 mm x 380 mm x 220 mm.

20

87 Flintab AB Flintab AB scale, type: 12-07/47-04, serial number:1207B1-310, dimensions scale: 400 mm x 300 mm x 120 mm,with Flintab AB indicator, dimensions: 450 mm x 260 mm x 180mm.

35

88 UBI Printer AB UBI Printer AB label printer, type: 501, serial number: 07763,115/230 V, 50-60 Hz, 2.6/1/3 A, dimensions: 470 mm x 280mm x 220 mm.

20

89 Flintab AB Flintab AB scale with indicator, type scale: 1040-10kg-C3, serialnumber: 37505, dimensions scale: 330 mm x 230 mm x 90mm, type indicator: 12-07P-01/47-04/1131-V, serial number:120701B1-91, dimensions indicator: 430 mm x 90 mm x 200mm. Including box with weighing cell.

25

90 Bizerba Bizerba scale with label printer, type: BS 100, number:1932370, year of construc�on: 2001, 230 V, 50 Hz, minimumweight: 40 g, maximum weight: 6/15 kg, e= 2/5 g, T= -6/9.995kg, dimensions scale: 330 mm x 270 mm, total dimensions:360 mm x 440 mm x 200 mm.

15

92 NN table S/s table, dimensions: 970 mm x 800 mm x 640 mm. 50

93 Intermec Intermec label printer, model: 501XP, serial number: 10539,100-240 V, 50-60 Hz, 2.5-1.2 A, dimensions: 490 mm x 270 mmx 290 mm.

10

94 Bizerba Bizerba scale, model: EW300, number: 1730456, year ofconstruc�on: 1999, 230 V, 50 Hz, 110 mA, minimum weight:20 g, maximum weight: 6 kg, e=1/2 g, T=6kg, dimensions scale:340 mm x 260 mm x 130 mm, with bizerba indicator,dimensions: 340 mm x 120 mm x 200 mm.

50

95 NN sink S/s sink with faucet, dimensions: 560 mm x 250 mm x 450 mm,including 2 Tork soap dispensers, SCA soap dispenser and Torkpaper dispenser.

25

96 NN knifesterilizer

Knife sterilizer, dimensions: 230 mm x 230 mm x 420 mm. 25

97 NIMO NIMO s/s sink, dimensions: 660 mm x 550 mm x 250 mm. 10


S/s knife sterilizer, dimensions: 370 mm x 220 mm x 640 mm,including s/s cabinet, dimensions: 400 mm x 320 mm x 300mm.

25


99 Bizerba /Intermec / UBI

Bizerba / Intermec / UBI weighing and labelling system,consis�ng of: Bizerba weighing scale, type: EW 300, number:1370457, max: 3/6 kg, min: 20 grams, e=1/2 grams,dimensions scale: 260 mm x 335 mm, including Intermec labelprinter, model: 501 XP, serial number: 09471, 100-240 V, 50-60Hz, 2.5/1.2 A, UBI label printer, type: 201, serial number:29138, year of construc�on: 115/230 V, 50-60 Hz, 2.6/1.3 Aand 2 Intermec labelers, model: (2x) EasyCoder F4, 100-240 V,50/60 Hz, 2-1 A, total dimensions: 600 mm x 1000 mm x 1580mm.

175

100 Intermec /Flintab AB

S/s frame with Intermec label printer, model: 501 XP, serialnumber: 07367, 100-240 V, 50-60 Hz, 2.5/1.2 A, includingFlintab AB weighing system, type: Microline 465, serialnumber: 465035, 230 V, 50 Hz, 80 W, total dimensions: 600mm x 800 mm x 1350 mm.

75

101 NN heatedcabinet

Heated cabinet, 4 floors, dimensions floors: 320 mm x 180mm, total dimensions: 480 mm x 320 mm x 490 mm.

5

102 Menu SystemAG

2 Menu System AG wok burners, type: MS-I-10 wok 300, serialnumber: 12592/15 and 11435/08, 400 V, 3 Ph, 50/60 Hz, 7 A, 5kW, diameter bowl: 300 mm, dimensions: (2x) 400 mm x 400mm x 200 mm.

50

103 Menu SystemAG

Menu System AG wok burner, type: MS-I-10 wok 300, serialnumber: 11436/01, 400 V, 3 Ph, 50/60 Hz, 6 A, 4 kW, diameterbowl: 300 mm, dimensions: 400 mm x 400 mm x 200 mm.

25

104 Menu SystemAG

Menu System AG wok burner, type: MS-I-10 wok 300, serialnumber: 12372/05, 400 V, 3 Ph, 50/60 Hz, 7 A, 5 kW, diameterbowl: 300 mm, dimensions: 400 mm x 400 mm x 200 mm.

25

105 NN table S/s table with perforated plates and drain, dimensions: 1000mm x 900 mm x 920 mm.

75

106 Bizerba /Intermec

Bizerba / Intermec weighing and labelling system, consis�ngof: Bizerba weighing scale, type: EW 300, number: 1558452,max: 3/6 kg, min: 20 grams, e=1/2 grams, dimensions scale:260 mm x 335 mm, including Intermec label printer, model:501 XP, serial number: 07425, 100-240 V, 50-60 Hz, 2.5/1.2 A,total dimensions: 700 mm x 1100 mm x 1500 mm. Screenindicator is broken.

175

107 NN rollies 8 plas�c rollies, dimensions: (8x) 620 mm x 410 mm x 170 mm. 15

108 Amaco 2 parts for Amaco printer, dimensions: 600 mm x 200 mm x400 mm and 600 mm x 200 mm x 500 mm.

20

109 NN smoke racks 6 s/s hanging smoke racks, 7 floors, dimensions: (6x) 1000 mmx 700 mm x 1850 mm.

150

110 NN box closingmachine

Box closing machine, belt width: (2x) 50 mm, roller width: 450mm, total dimensions: 1800 mm x 800 mm x 1550 mm.

300

111 Siat Siat box closing machine, model: SM2, serial number: 16022,year of construc�on: 1991, 380 V, 3 Ph, 50 Hz, 240 W, 1.4 A,belt width: (2x) 75 mm, roller width: (1x) 75 mm, totaldimensions: 1150 mm x 750 mm x 1650 mm.

125


112 NN eleva�ngbelt

Mobile eleva�ng belt, s/s frame, plas�c belt, belt width: 400mm, eleva�ng height: 1580 mm, total dimensions: 2800 mm x720 mm x 1700 mm.

350

113 NN transportbelt

Transport belt with s/s frame, plas�c belt, belt width: 360 mm,with festo cylinder, model: DSL-32-25-270-P-A-52-B, maximumpressure: 8 bar/120 psi, total dimensions: 840 mm x 700 mm x1320 mm.

150

114 NN �l�ng device S/s �l�ng device for pallet boxes, maximum dimensions palletbox: 880 mm x 1140 mm x 920 mm, total dimensions: 1650mmx x 1330 mm x 1240 mm.

450

115 Eleiko Eleiko electric cooking plate, type: 7406, serial number: 10-82,220 V, 400 W, dimensions 545 mm x 325 mm x 120 mm.

5

116 Electrolux Electrolux electric cooking plate, model: 328 80, number:001448, 220 V, 50-60 Hz, 0.25 kW, dimensions: 595 mm x 300mm x 110 mm.

5


118 NN meat bins 2 s/s meat bins, volume: 200 liter. 80


120 NN meat bins 3 s/s meat bins, volume: 200 liter, dimensions: (1x) 1000 mm x700 mm x 700 mm and (2x) 700 mm x 670 mm x 700 mm.

120

121 NN tub S/s tub with agitator, inside dimensions: 1110 mm x 890 mm x700 mm, dimensions tub: 1150 mm x 970 mm x 1100 mm.

175

122 ThermodGroupo

Thermod Groupo double plas�c swing door, dimensions: (2x)975 mm x 2320 mm, thickness door: 40 mm. Frame notincluded.

50


S/s knife sterilizer, dimensions: 230 mm x 230 mm x 390 mm. 25

124 NN smoketrolley

S/s smoke trolley for salmon, 21 floors, including 21 grids,dimensions each grid: 1000 mm x 940 mm, total dimensions:1010 mm x 1010 mm x 1990mm.

250

125 NN smoketrolleys

2 s/s smoke trolleys for salmon, 21 floors, including 21 gridseach, dimensions each grid: 1000 mm x 940 mm, totaldimensions: (2x) 1010 mm x 1010 mm x 1990 mm.

500

126 Weber Weber knife sharpener on steel table, type: MSG 460, number:210, 380 V, 50 Hz, 0.18 kW, dimensions: 620 mm x 700 mm x1600 mm.

450

127 Imaje S.A. Imaje S.A. inkjet printer, type: Jaime 1000, number:10560103211, 200-240 V, 50-60 Hz, 0.85 A, 200 W,dimensions: 470 mm x 350 mm x 1060 mm, with transportbelt, belt width: 195 mm, dimensions: 720 mm x 1550 mm x1250 mm.

250

128 NN meat bins 8 s/s meat bins, volume: 200 liter. New. 1000





2 s/s smoke trolleys for salmon, (1x) 21 floors and (1x) 25floors, including 46 grids, dimensions grids: (21x) 1000 mm x940 mm, (25x) 1000 mm x 1000 mm, dimensions trolley: (1x)1080 mm x 1010 mm x 1990 mm, (1x) 1070 mm x 1010 mm x1980 mm.

500


3 s/s smoke trolleys, 6 floors, dimensions: (3x) 1000 mm x1010 mm x 1980 mm.

210

133 Me�ler Toledo/ Intermec /Flintab AB

Me�ler Toledo / Intermec / Flintab AB weighing and labellingsystem, consis�ng of: Me�ler Toledo scale, type: SPI-A15 serialnumber: 2683971, 230 V, 50/60 Hz, 110 mA, maximum weight:15 kg, dimensions scale: 350 mm x 280 mm, Intermec labelprinter, model: Easycoder 201, serial number: 55200, Intermeclabel printer, model: Easycoder 501 XP, serial number: 11308and Flintab AB monitor, type: Microline 463, serial number:463343, total dimensions: 1150 mm x 800 mm x 1650 mm.Label printer is missing cover.

175

134 Flintab AB Flintlab AB floor weighing scale with Flintlab indicator, type:Vik�ndikator Ohaus, model: T 51 SW, serial number:0040847-6CM, 100-240 V, 50/60 Hz, 1 A, nMax: 10000,dimensions scale: 1480 mm x 1620 mm x 90 mm, dimensionsindicator: 320 mm x 210 mm x 80 mm.

225

135 NN �l�ng device S/s �l�ng device for meat bins, �l�ng height: 1260 mm, totaldimensions: 1420 mm x 1160 mm x 1790 mm.

275

136 Wexiödisk Wexiödisk AB dishwasher, type: WD-6E, number: 0023592000, 400 V, 3 Ph, 50 Hz, 16 A, 10.8/9.75/0.75 kW, dimensions:720 mm x 700 mm x 1450 mm.

650

137 NN trolleys 3 s/s trolleys, 16 floors, dimensions: (3x) 760 mm x 810 mm x1820 mm. Including approximately 50 s/s plates.

225

138 ThermodGroupo

Thermod Groupo double plas�c swing door, dimensions: (2x)730 mm x 2350 mm, thickness door: 40 mm. Frame notincluded.

50

139 Electrolux Electrolux oven, model: 97 64 07, number: 001502, 380 V, 50Hz, 1.6 kW, dimensions: 1580 mm x 800 mm x 1750 mm.Including mobile li�er for racks, dimensions: 760 mm x 660mm x 1600 mm, and 2 s/s racks, 17 floors, dimensions floor:530 mm x 300 mm, dimensions rack: (2x) 580 mm x 360 mm x1470 mm, including 27 gastronorm bins, dimensions: (25x) 530mm x 330 mm x 60 mm and (2x) 530 mm x 330 mm x 35 mm.

350

140 Metos SystemRa�onal

Metos System Ra�onal combi steamer, model: MSCC 202,serial number: E22SE0507203881, 62.0 kW, 150-600 kPa,dimensions: 1085 mm x 1020 mm x 1840 mm. Including s/strolley for plates, 20 floors, including approximately 11 plates,dimensions trolley: 685 mm x 870 mm x 1710 mm.

750

141 Veab Veab combi steamer, type: B-1215, serial number: 78631, 400V, 3 Ph, 50 Hz, 11 floors, dimensions floor: (11x) 530 mm x 355mm, total dimensions: 900 mm x 900 mm x 1150 mm.

250


142 Ra�onal Ra�onal combi steamer, type: CPC 101/04, serial number:E11CC1021041033, 400 V, 3 Ph, 50 Hz, 19 kW, 150-600 kPa, 8floors, dimensions floor: (8x) 330 mm x 525 mm, totaldimensions: 900 mm x 840 mm x 1130 mm.

750


144 Ra�onal Ra�onal combi steamer, type: CM201, serial number: 21M90111829, 380 V, 3 Ph, 50 Hz, 36.6 kW, dimensions: 930 mm x950 mm x 1800 mm. Including mobile li�er for racks,dimensions: 760 mm x 660 mm x 1600 mm and s/s rack, 17floors, with 9 gastronorm bins, dimensions: 760 mm x 660 mmx 1600 mm.

1250

145 Granuldisk Granuldisk AB washing machine, type: GD 700, number: 195,year of construc�on: 03.01.31, 400 V, 50 Hz, 3+9+2.6+14.8 kW,3-6 bar, 55-65° Celsius, weight: 410 kg, dimensions: 850 mm x1040 mm x 1070 mm

750

146 NN hose reel S/s hose reel with hose, dimensions: 280 mm x 150 mm x 110mm.

5

147 Veab Veab combi steamer, model: B1622, number: 205668-2, yearof construc�on: 03-98, 400 V, 3 Ph, 50 Hz, 160 W, 12 floors,dimensions floors: 530 mm x 330 mm, total dimensions: 980mm x 980 mm x 1700 mm.

450

148 Electrolux Electrolux double cooking vessel, model: Boiling pan SMART100L, serial number: 063745752 and 063745751, year ofconstruc�on: 2006, 400 V, 3 Ph, 50 Hz, 33-35 A, 22.5 kW,capacity: (2x) 100 liter, maximum temperature: 127°C,minimum temperature: - 5°C, dimensions: 2250 mm x 900 mmx 1250 mm.

1250

149 JøniStorkkøkkenerA/S

Jøni Storkkøkkener A/S �ltable fryer, type: J 6750 VARI, fabricnumber: 943037, year of construc�on: 1994, 400 V, 3 Ph,50/60 Hz, 25 A, 17.6 kW, inside dimensions: 980 mm x 550 mmx 100 mm, total dimensions: 1050 mm x 900 mm x 900 mm.

250

150 JøniStorkkøkkenerA/S

Jøni-Storkøkkener A/S �ltable fryer, type: G40 E, serialnumber: 0895, year of construc�on: 1988, 380/220 V, 3 Ph, 9kW, inside dimensions: 750 mm x 600 mm x 80 mm, totaldimensions: 820 mm x 800 mm x 950 mm.

220

151 NN swing door Plas�c swing door, dimensions: (2x) 730 mm x 40 mm x 2340mm. Frame not included.

50

152 NN wri�ng table S/s mobile wri�ng table : dimensions: 550 mm x 500 mm x1550 mm.

50

153 H. Bjørnstad &Co. A/S

H. Bjørnstad & Co. A/S cooking vessel, type: FO 200, number262, 220 V, 25 A, 7200 W, inside dimensions: 860 mm x 500mm x 460 mm, total dimensions: 1380 mm x 800 mm x 890mm.

200

154 NN au-bainmarie

S/s au-bain marie, 4 compartments, dimensionscompartments: (4x) 305 mm x 510 mm x 220 mm, totaldimensions: 1610 mm x 650 mm x 875 mm. Including 4 s/sgastronorm bins and lids, dimensions bin: (4x) 325 mm x 530mm x 200 mm.

150


155 Maskinbörsen Maskinbörsen au-bain marie, 3 compartments, dimensionscompartments: (3x) 305 mm x 510 mm x 220 mm, totaldimensions: 1300 mm x 650 mm x 875 mm. Including 3 s/sgastronorm bins and lids, dimensions bin: (3x) 325 mm x 530mm x 200 mm.

150

156 NN trolleys 2 steel trolleys, 20 floors, dimensions each floor: 455 mm x1220 mm, dimensions trolley: (2x) 510 mm x 1240 mm x 1840.Including large amount of various baking plates and bread �ns.

50

157 NN trolleys 5 steel trolleys, 20 floors, dimensions each floor: 455 mm x1220 mm, dimensions trolley: (5x) 510 mm x 1240 mm x 1840.Including large amount of various baking plates.

125

158 NN trolleys 8 steel trolleys, 20 floors, dimensions each floor: 455 mm x1220 mm, dimensions trolley: (8x) 510 mm x 1240 mm x 1840.

200

159 NN trolley Steel trolley, 20 floors, dimensions each floor: 455 mm x 1220mm, dimensions trolley: 510 mm x 1240 mm x 1840 mm.

25

160 Stenborg Dörr Stenborg Dörr plas�c swing door, dimensions: (2x) 720 mm x2400 mm. Frame not included.

50

161 NN sink S/s sink with faucet, sensor control, dimensions: 600 mm x 450mm x 400 mm. Including Tork paper dispenser, dimensions:300 mm x 440 mm x 100 mm and hose reel with hose,dimensions: 280 mm x 150 mm x 110 mm.

50

162 MainGateIndustridörrarAB

MainGate Industridörrar AB plas�c swing door, serial number:20994009 and 20994008, dimensions: (2x) 800 mm x 2360mm. Without hinge.

25

163 Stenborg Dörr Stenborg Dörr plas�c swing door, dimensions: (2x) 720 mm x2400 mm. Frame not included.

50

164 NN cratedispensers

2 mobile crate dispensers, dimensions: (2x) 920 mm x 700 mmx 960 mm.

100

165 NN cratedispensers

3 mobile crate dispensers, dimensions: (3x) 920 mm x 700 mmx 960 mm. One is missing top.

150



168 NN hose reel S/s hose reel with hose and 2 s/s cups, dimensions hose reel:400 mm x 230 mm x 235 mm, dimensions cups: (2x) 265 mm x250 mm x 200 mm.

25

169 NN pla�orm S/s pla�orm with stairs, pla�orm height: 1980 mm, totaldimensions: 1580 mm x 850 mm x 2690 mm.

75

170 NN sink S/s sink with faucet, knee control, 1 Tork paper dispenser and2 Tork soap dispensers and hose, dimensions sink: 400 mm x370 mm x 1100 mm, dimensions soap dispenser: 330 mm x130 mm x 130 mm, dimensions paper dispenser: 310 mm x450 mm x 110 mm.

50

171 NN pallet rack S/s pallet rack, 3 uprights, height: 1530 mm, (2x) 4 beams,length: 2000 mm, total dimensions: 4350 mm x 1050 mm x1530 mm. Content not included.

50

172 NN rack S/s wall mounted rack, dimensions: 1140 mm x 280 mm x 210mm.

5


173 Dan-Doors Dan-Doors double plas�c swing door, type: MI040B, number:174, dimensions: (2x) 650 mm x 2250 mm, thickness: 30 mm.Frame not included.

50

174 AB TronasRos�ria

AB Tronas Ros�ria double s/s swing door, dimensions: (2x) 710mm x 2410 mm, thickness: 25 mm. Frame not included.

50

175 NN sink S/s sink with faucet, sensor control, dimensions: 600 mm x 450mm x 390 mm, with 2 Tork soap dispensers, Tork paperdispenser and Cederroth eyewash.

50

176 Trimax Trimax s/s hose reel with hose, dimensions: 400 mm x 250 mmx 150 mm.

5

177 Dan-Doors Dan-Doors electrical shu�er door, type: AR2002, lb number:90766, year of construc�on: 2006, door width: 2000 mm.

200

178 SonessonInredningar AB

Sonesson Inredningar AB 3-doors steel locker, dimensions: 900mm x 550 mm x 2100 mm.

25

179 NN trolley 2 s/s trolleys, dimensions: (1x) 520 mm x 840 mm x 1000 mmand (1x) 500 mm x 840 mm x 950 mm.

10

180 InauenMaschinen AG

Inauen Maschinen AG vacuum machine, type: VC999/07 DK,machine number: 0785545, 380 V, 3 Ph, 50 Hz, s/s roll width:400 mm, seal length: (2x) 445 mm, (1x) 950 mm, dimensionschamber: 450 mm x 950 mm, total dimensions: 1150 mm x800 mm x 1050 mm, including Busch vacuum pump, type:160-132, number: 42930, vacuum: 0.5 mbar and LeyboldHeraeus roots vacuum pump, type: WAU 502, fabrica�onnumber: 11731 1185 180083, 505 m³/h.

1500

181 NN smoke rack S/s hanging smoke rack, 7 floors, dimensions: 1000 mm x 700mm x 1800 mm.

25

182 Bonaco Bonaco plas�c electrical sliding door with rails, dimensionsdoor: 2510 mm x 2200 mm, length rail: 4100 mm.

100

183 BT Industries AB BT Industries AB electrical pallet li�er, type: V1000, serialnumber: 180029/1987, maximum capacity: 1000 kg, maximumworking width: 850 mm, maximum eleva�ng height: 800 mm,total dimensions: 1450 mm x 1000 mm x 1650 mm.

100

184 Eldon Eldon fuse box, type: HGBU 33/6, dimensions: 550 mm x 550mm x 2600 mm.

25

185 Eldon 2 Eldon fuse boxes, type: HST 4325, HST 3325, dimensions:(2x) 550 mm x 550 mm x 2600 mm.

50

186 NN swing door S/s swing door, dimensions: (2x) 770 mm x 2340 mm. Framenot included.

50

187 Dan-Doors Dan-Doors electrical shu�er door, type: AR2001S, lb number:95936, year of construc�on: 2006, door width: 1300 mm.

175

188 Nimo Nimo drying cabinet, model: TS 65, serial number: 02608730,220-230 V, 50 Hz, 1500 W, 10 A, dimensions: 600 mm x 650mm x 1950 mm.

20

189 N&N N&N; gastronomic pan, serial number: 071, year ofconstruc�on: 2007, 230/400 V, 50 Hz, 15 kW, weight: 260 kg,dimensions plate: 1980 mm x 585 mm, total dimensions: 2020mm x 750 mm x 870 mm.

200


190 NN cookingvessel

S/s �ltable cooking vessel, inside dimensions: 1200 mm x 1200mm x 800 mm, total dimensions: 2200 mm x 1550 mm x 2150mm.

150

191 NN rack 2 s/s wall mounted racks, dimensions: (1x) 1485 mm x 40 mmx 140 mm and (1x) 1445 mm x 40 mm x 120. Includingcontent.

20

192 ToFo Trading AB 2 ToFo Trading AB isolated trolleys, type: C-720, serial number:322005 and 322007, year of construc�on: 2014, volume: 720liter, inside dimensions: 800 mm x 600 mm x 1450 mm, totaldimensions: 950 mm x 730 mm x 1750 mm.

50

193 ToFo Trading AB 2 ToFo Trading AB isolated trolleys, type: C-720, serial number:322011 and 269429, year of construc�on: 2014, volume: 720liter, inside dimensions: 800 mm x 600 mm x 1450 mm, totaldimensions: 950 mm x 730 mm x 1750 mm.

50

194 NN rollies 2 s/s trolleys with approximately 40 rollies, dimensions trolley:(2x) 800 mm x 660 mm x 1600 mm, dimensions rollies: (40x)410 mm x 620 mm x 160 mm.

100


100


150

197 NN trolley Steel trolley for bakery plates, 6 floors, dimensions: 700 mm x530 mm x 770 mm.

5

198 NN plates Steel trolley with approximately 125 perforated plates,dimensions plate: 600 mm x 450 mm, total dimensions: 700mm x 550 mm x 800 mm.

40

199 NN plates 3 trolleys with approximately 350 plates for oven, dimensionsplate: 595 mm x 450 mm, dimensions trolley: 660 mm x 530mm x 720 mm.

200

200 NN door Wooden door, dimensions 920 mm x 2000 mm, thickness: 35mm. Frame not included

25


300


175


200

204 NN plates 7 trolleys with approximately 850 plates for oven, of which 150perforates plates, dimensions plate: 595 mm x 450 mm,dimensions trolley: 700 mm x 500 mm x 780 mm.

300

205 NN door Double wooden door, dimensions: (2x) 720 mm x 2350 mm,thickness: 35 mm. Frame not included.

25


206 NN sink S/s sink with faucet, sensor control, with 2 Tork soap and 1paper dispenser, dimensions sink: 600 mm x 450 mm x 500mm, dimensions soap dispenser: 330 mm x 130 mm x 130mm, dimensions paper dispenser: 310 mm x 450 mm x 110mm.

50

207 NN table Wall mounted table with plas�c top, �ltable top, dimensions:700 mm x 435 mm x 630 mm.

10


5

209 Bernos AB Bernos AB plas�c swing doors, dimensions: 950 mm x 2100mm. Frame not included.

50

210 NN door Wooden door, dimensions 920 mm x 2000 mm, thickness: 35mm. Frame not included

25

211 NN sink withhose reel

S/s sink with faucet, sensor control and hose reel, dimensionssink: 400 mm x 400 mm x 600 mm, dimensions hose reel: 260mm x 150 mm x 140 mm.

35

212 NN coat rack Wall mounted coat rack, dimensions: 4800 mm x 115 mm x120 mm.

5

213 NN trolley Steel trolley with 3 waste bag holders, 5 aluminum plates and2 plas�c rollies, dimensions: 600 mm x 710 mm x 1600 mm.

10

214 NN table Mobile steel table, dimensions: 630 mm x 550 mm x 950 mm. 5

215 NN table Mobile steel table, dimensions: 1270 mm x 700 mm x 850 mm.Including 2 baking plates and 6 baking �ns.

10

216 NN trolleys 2 steel trolleys, 20 floors, dimensions: (2x) 1240 mm x 510 mmx 1840 mm.

50

217 NN trolleys 2 steel trolleys, 20 floors, dimensions: (2x) 1240 mm x 510 mmx 1840 mm. Including approximately 120 plates.

75

218 NN trolleys 5 steel trolleys, 20 floors, dimensions: (5x) 1240 mm x 510 mmx 1840 mm. Including large amount of baking �ns.

175

219 NN trolleys 4 steel trolleys, 20 floors, dimensions: (4x) 1240 mm x 510 mmx 1840 mm.

100

220 NN frame S/s frame, dimensions: 1900 mm x 1500 mm x 2530 mm. 15

221 Nimo KG Nimo KG li�er for 200 liter meat bins, type: SKV200 MKR,serial number: 240, maximum li�ing height: 2200 mm, totaldimensions: 1050 mm x 1000 mm x 3100 mm.

450

222 Trepko Trepko cup filling machine, 12 sta�ons, machine number:3276-91, dimensions cups: (12x) 100 mm x 65 mm, withBecker vacuum pump, type: U3.6 SA, 6 m³/h, total dimensions:1950 mm x 1200 mm x 2100 mm. Including s/s frame andpla�orm with stairs, dimensions frame: 1300 mm x 1495 mm x990 mm, dimensions pla�orm: 1000 mm x 490 mm x 1850mm.

1500

223 NN trolley Steel trolley, 36 floors, dimensions: 510 mm x 620 mm x 1830mm. Including approximately 14 aluminum plates.

25

224 NN trolley Steel trolley: 36 floors, dimensions: 520 mm x 580 mm x 1830mm.

25


225 Dan-Doors Dan-Doors swing door, type: ML005D, serial number: 5011,year of construc�on: 10-96, dimensions: (2x) 795 mm x 2390mm. Frame not included.

50

226 NN sink S/s sink with faucet, dimensions: 440 mm x 330 mm x 440 mm,including 2 Tork soap dispensers, 2 Tork paper dispensers, Torkcup dispenser and s/s hose reel with hose.

50

227 Bernos AB Bernos AB plas�c swing doors, dimensions: 950 mm x 2100mm. Frame not included.

50

228 Setu AB Setu AB smoke chamber for 6 trolleys or hanging racks, type:SRI 62, serial number: 13501, year of construc�on: 2000, newcontrol panel, inside dimensions: 3500 mm x 2200 mm x 2100mm, clearance doors: (2x) 1200 mm x 2100 mm, totaldimensions: 3800 mm x 2900 mm x 3000 mm. Without smokegenerator.

3250

229 Setu AB Setu AB smoke chamber for 6 trolleys or hanging racks, type:SRI 62, serial number: 13502, year of construc�on: 2000, newcontrol panel, inside dimensions: 3500 mm x 2200 mm x 2100mm, clearance doors: (2x) 1200 mm x 2100 mm, totaldimensions: 3800 mm x 2900 mm x 3000 mm. Without smokegenerator.

3250

230 NN smokechamber

S/s smoke chamber for 4 trolleys or 6 hanging racks, insidedimensions: 2750 mm x 2600 mm x 2100 mm, clearancedoors: (2x) 1200 mm x 2100 mm, total dimensions smokechambers: 3050 mm x 2900 mm x 2800 mm. Doors aremissing.

500

231 NN smoke rack 2 s/s hanging smoke racks, 7 floors, dimensions: (2x) 1010 mmx 700 mm x 1800 mm, including 10 s/s plates, dimensionsframes: (12x) 455 mm x 630 mm.

50


5

233 NN door S/s door, dimensions: 1195 mm x 2320 mm, thickness: 40 mm.Frame not included.

50

234 Tarber Tarber smoke generator for smoke condensate, type: TG 400EV, year of construc�on: 1997, number: 970007, 230 V, 50 Hz,10 A, 0.5 kW, including Red Arrow dual tank box, volume eachtank: 32 liter, total dimensions: 900 mm x 450 mm x 2250 mm.

750

235 NN locker 1 door locker, dimensions: 400 mm x 550 mm x 2090 mm. 10

236 Alpas Alpas smoke generator, dimensions: 750 mm x 1000 mm x1810 mm.

125

237 NN door S/s double door, dimensions: (2x) 790 mm x 2450 mm,thickness door: 25 mm. Frame not included.

50

238 NN cookingchamber

S/s cooking chamber for 4 trolleys or 6 hanging racks, insidedimensions: 2700 mm x 2500 mm x 2100 mm, clearancedoors: (2x) 1200 mm x 2100 mm, total dimensions cookingchamber: 3050 mm x 3050 mm x 2800 mm, including switchcabinet with new control panel, dimensions switch cabinet:800 mm x 350 mm x 1200 mm.

1000

239 NN hose reel Hose reel with hose, dimensions: 280 mm x 140 mm x 110mm.

5


240 NN smoke rack S/s hanging smoke rack, 7 floors, dimensions: 1010 mm x 700mm x 1800 mm, including 12 s/s plates, dimensions frames:(12x) 455 mm x 630 mm.

50

241 NN rail forsmoke racks

S/s rail for smoke racks used to load and unload smokechambers, distance between tubes: 30 mm, total length:approximately 45000 mm.

400

242 NN smoke rack 22 s/s hanging smoke racks, 7 floors, dimensions: (22x) 1010mm x 700 mm x 1800 mm.

450

243 NN smoke rack 12 s/s hanging smoke racks, 7 floors, dimensions: (12x) 1010mm x 700 mm x 1800 mm.

250

244 NN tool forhanging line

Steel tool for hanging line, dimensions: 250 mm x 210 mm x980 mm.

10


5

246 Tork 2 Tork soap dispensers and Tork paper dispenser, dimensionssoap dispenser: (2x) 110 mm x 120 mm x 290 mm, dimensionspaper dispenser: 300 mm x 90 mm x 430 mm.

10

247 NN swing door Double plas�c swing door, dimensions: (2x) 600 mm x 2380mm, thickness: 30 mm. Frame not included.

50

248 Dan-Doors Dan-Doors plas�c swing door, type: ML0052D, serial number:6592, year of construc�on: 05.99, dimensions: 660 mm x 2300mm. Without hinges

50

249 NN cabinet Steel cabinet , (2x) 4 floors, dimensions: 2120 mm x 530 mm x2290 mm. Content not included.

10

250 NN shelves 4 s/s shelves, dimensions: (4x) 1820 mm x 370 mm. Includingframe for wall moun�ng

10

251 AB TronasRos�ria

AB Tronas Ros�ria s/s swing door, dimensions door: 1220 mmx 2330 mm, thickness: 30 mm. Frame not included.

50

252 NN sink S/s sink with faucet, knee control, dimensions: 450 mm x 400mm x 900 mm.

10

253 NN sink S/s sink with faucet, sensor control, dimensions: 590 mm x 450mm x 600 mm, including Tork soap dispenser, Tork paperdispenser, Texogen dispenser, model: 38411 and s/s cabinet,dimensions: 300 mm x 240 mm x 500 mm.

50

254 Tork Tork paper dispenser, dimensions: 300 mm x 90 mm x 440mm, including Tork soap dispenser.

50

255 NN li�er Li�er for E2 crates, eleva�ng height: 2090 mm, totaldimensions: 2300 mm x 850 mm x 2550 mm.

350


256 Mul�vac Mul�vac thermoformer, type: R5200, machine number:2382/100, year of construc�on: 1991, 380 V, 3 Ph, 50 Hz, 11kW, 36 A, dye: (3x) 190 mm x 120 mm, index: 200 mm, filmwidth: 420 mm, with Mr. SelbstklebeTechnik labeler, model:MRG21 CP 4212 CP 420 K 10, machine number: 8283/91, 50Hz, 2 Wi�-Gasetechnik gas mixing sta�ons, type: KN100-2MEM, year of construc�on: 1997, gas: 02/C02, and type:KM100-2M, year of construc�on: 1994, gas: N2/C02, s/s tabletop, diameter: 1250 mm, total dimensions: 6000 mm x 1500mm x 2100 mm. Including s/s trolley and 2 crates with largeamount of parts and 4 pegs with various frames. Withoutvacuum pump.

2750

257 Bizerba /Intermec

Bizerba / Intermec weighing and labelling system, consis�ngof: Bizerba weighing scale, type: EW 300, number: 1557762,max: 3/6 kg, min: 20 grams, e=1/2 grams, dimensions scale:260 mm x 335 mm, including Intermec label printer, model:501 XP, serial number: 22460, 100-240 V, 50-60 Hz, 2.5/1.2 A,total dimensions: 700 mm x 1100 mm x 1500 mm.

175

258 Videojet Videojet inkjet printer, model: Excel/170I, serial number:I97B23041, 100-240V, 1 Ph, 50/60 Hz, 2-1 A, dimensions: 720mm x 190 mm x 770 mm.

150

259 NN swing door Double plas�c swing door, dimensions: (2x) 620 mm x 2350mm, thickness: 40 mm. Frame not included.

50

260 NN sink S/s sink with faucet, sensor control, dimensions: 600 mm x 450mm x 450 mm, including 2 Tork soap dispensers, SCA soapdispenser, Tork paper dispenser and Tork cup dispenser.

50

261 Nordic Door AB Nordic Door AB electric shu�er door, type: 500/580, number:3603, year of construc�on: 02/01, dimensions: 2100 mm x2600 mm.

200

262 FlexiTemp 2 FlexiTemp mobile refrigerated boxes, type: A-580, serialnumber: 5858, year of construc�on: 04-2003, 0.30 W/m²K,and type: A-580 liter, year of construc�on: 1999, dimensions:(2x) 830 mm x 710 mm x 1740 mm.

50

263 FlexiTemp FlexiTemp refrigerant pump on s/s frame, including AtlasCopco hoist, dimensions: 1000 mm x 1000 mm x 2500 mm.

75

264 SIS 2 SIS pallet racks consis�ng of: 9 uprights, height: 6500 mm,(2x) 25 beams, length: 2750 mm, total dimensions: 22000 mmx 1050 mm x 6500 mm and pallet rack consis�ng of: 2uprights, height: 6500 mm and 3 beams, length: 2750 mm,total dimensions: 3000 mm x 1050 mm x 6500 mm. Withoutcontent.

350

265 BT BT electrical pallet li�er, type: LST 1350/11, number: 440986AA/2002, weight without ba�ery: 937 kg, ba�ery weight:165-265 kg, 24 V, fork length: 1150 mm, including charger,type: STC 24/80, serial number: 07120239, 1x 220/230/240 V,50 Hz, 16 A, output: 24 V DC 80 A, total dimensions: 1900 mmx 900 mm x 1700 mm.

175


268 NN pallet racks 3 steel pallet racks, consis�ng of 1 pallet rack with 6 uprights,height: 3450 mm, 20 beams, length: 1800 mm, totaldimensions: 9600 mm x 1040 mm x 3450 mm, 1 pallet rackwith 3 uprights, height: 3450 mm, 8 beams, length: (4x) 2700mm and (4x) 1850 mm, total dimensions: 4600 mm x 1050 mmx 3450 mm, 1 pallet rack with 3 uprights, height: 3450 mm, 4beams, length: 1850 mm, total dimensions: 4600 mm x 1050mm x 3450 mm.

200

269 NN pallet rack Steel pallet rack, consis�ng of 3 uprights: (3x) 3200 mm, 8beams, length: (8x) 1850 mm, total dimensions: 3950 mm x1100 mm x 3200 mm.

75

270 NN rack S/s rack, 3 floors, dimensions: 2000 mm x 1250 mm x 1670mm.

50

271 NN sink S/s sink with faucet, sensor control, dimensions: 590 mm x 450mm x 600 mm, with Ki�ner Bulgaria s/s knife sterilizer, type:153201, serial number: 03352, year of construc�on: 2006, 220V, 50 Hz, 11 kg, dimensions: 220 mm x 220 mm x 450 mm,including 2 SCA soap dispensers, Tork soap dispenser and Torkpaper dispenser.

50


5

273 Oras Electra Oras Electra s/s sink with faucet, sensor control, dimensions:600 mm x 450 mm x 350 mm, including 2 Tork paperdispensers, 2 Tork soap dispensers, Akta bandage kit andCederroth holder for eye shower.

50

274 NN plates S/s hook with 14 plas�c plates, dimensions hook: 30 mm x 220mm x 230 mm, dimensions plate: (14x) 535 mm x 320 mm x 10mm.

5

275 NN hose reel Hose reel with hose and pistol, dimensions: 450 mm x 250 mmx 110 mm.

5

276 NN cabinet S/s cabinet, dimensions: 590 mm x 230 mm x 400 mm. 10

277 NN doors 3 s/s doors, dimensions door: (3x) 1260 mm x 450 mm x 2300mm. Frame not included.

75

278 NN smoke racks 10 s/s hanging smoke racks, 7 floors, dimensions: (10x) 1020mm x 700 mm x 1700 mm.

200


200


200


220

282 NN doors 3 s/s doors, dimensions door: (3x) 1050 mm x 2320 mm,thickness 40 mm. Frame not Included.

75

284 Busch Busch vacuum pump, type: LC 0220 A GEO, number: 58840,220 m³/h, 33 mbar, with motor, 5.5 kW, dimensions: 850 mm x530 mm x 800 mm on s/s frame, dimensions: 1050 mm x 800mm x 790 mm.

175


285 Becker Becker vacuum pump on s/s frame, type: Picchio 2200,number: C 1951004, year of construc�on: 2004, vacuum:100/100, inlet capacity: 90/108, 1.8/2.5 kW, 1420/1710 rpm,with Becker motor, 2.4/3 kW, dimensions pump: 720 mm x 370mm x 350 mm, total dimensions: 1000 mm x 600 mm x 800mm.

200

286 Vaculex AB Vaculex AB suc�on device, width: 260 mm x 200 mm, lengthrail: 5000 mm and 2500 mm.

50


5

288 NN door S/s door, dimensions: 1090 mm x 1980, thickness: 40 mm.Frame not included.

25

289 Tork Tork paper dispenser and 2 Tork soap dispenser, dimensionspaper dispenser: 300 mm x 450 mm x 110 mm, dimensionssoap dispenser: (2x) 330 mm x 130 mm x 130 mm.

10

291 NN door S/s door, dimensions: (2x) 615 mm x 2350 mm, thickness: 40mm. Frame not included.

25

292 NN cabinet S/s steel wall mounted cabinet, 2 floors, dimensions: 650 mmx 800 mm x 330 mm.

5

293 NN door S/s double door, dimensions: (2x) 615 mm, thickness: 40 mm.Frame not included.

25

294 NN rack S/s rack, 6 floors, dimensions: 1050 mm x 605 mm x 210 mm. 10

295 NN trolleys 3 steel trolleys, dimensions: (2x) 800 mm x 700 mm x 960 mmand (1x) 420 mm x 675 mm x 1750.

25

296 Dan-Doors Dan-Doors double door, dimensions: 705 mm x 2350 mm,thickness: 60 mm. Frame not included.

25

297 NN trolley Steel trolley with 2 wooden floors, dimensions: 560 mm x 990mm x 960 mm.

5

298 NN pallet racks 2 pallet racks, consis�ng of: 5 uprights, height: (4x) 2000 mmand (1x) 2500 mm, 8 beams, length: 2750 mm, totaldimensions: 11050 mm x 1120 mm x 2500 mm and consis�ngof: 4 uprights, height: 2000 mm, 6 beams, length: (4x) 2750mm and (2x) 1900 mm, total dimensions: 7500 mm x 1120 mmx 2000 mm.

100


5

300 NN pallet rack Pallet rack, consis�ng of: 3 uprights, height: 2000, 8 beams,length: 1940, total dimensions: 3960 mm x 1100 mm x 2000mm.

50

301 NN rack Steel rack, 5 floors, dimensions: 3050 mm x 600 mm x 2100mm.

25

302 NN hose reel S/s hose reel with hose, dimensions: 300 mm x 100 mm x 200mm.

5

303 NN couplings Pallet with various couplings, dimensions pallet: 1200 mm x800 mm x 460 mm.

10

304 NN hoses Pallet with various hoses, dimensions pallet: 1200 mm x 800mm x 350 mm.

10


305 NN waterstorage system

Water storage system consis�ng of 18 tanks on steel frame,dimensions tank: (18x) 700 mm x 700 mm x 1700 mm,dimensions frame, (6x) 1900 mm x 750 mm x 2250 mm.

350

306 Tork Tork paper dispenser, dimensions: 300 mm x 450 mm x 110,with 2 Tork soap dispenser and Tork cup dispenser.

10

307 NN bench 2 benches, dimensions: (2x) 2000 mm x 355 mm x 425 mm. 5

308 Tork 2 Tork paper dispensers, dimensions (2x) 300 mm x 450 mm x110 mm, with 6 Tork soap dispensers.

25

309 Tork Tork paper dispenser, dimensions: 300 mm x 450 mm x 110mm, with 2 Tork soap dispensers and Tork cup dispenser.

10


Large amount of Sonesson Inredningar AB lockers withbenches, (8x) 3 doors, dimensions: (8x) 1200 mm x 850 mm x2250 mm, (2x) 2 doors, dimensions: (2x) 800 mm x 850 mm x2250 mm, including 1 bench, dimensions: 2000 mm x 350 mmx 420 mm.

200

311 Tork Tork paper dispenser, dimensions: 300 mm x 450 mm x 110mm, with 2 Tork soap dispensers.

15


Large amount of Sonesson Inredningar AB lockers withbenches, (11x) 3 doors, dimensions: (11x) 1200 mm x 850 mmx 2250 mm, (5x) 2 doors, dimensions: (5x) 800 mm x 850 mm x2250 mm and (2x) 1 doors, including 2 benches, dimensions:(2x) 2000 mm x 350 mm x 420 mm.

300

313 Tork 2 Tork paper dispensers, dimensions (2x) 300 mm x 450 mm x110 mm, with 7 Tork soap dispensers, SCA soap dispenser andTork cup dispenser.

25

314 NN sink S/s sink with faucet, sensor control, dimensions: 570 mm x 430mm x 360 mm, with Tork paper dispenser and 2 Tork soapdispenser.

50

315 NN cabinet S/s wall mounted cabinet, dimensions: 710 mm x 690 mm x310 mm.

5

316 NN door Wooden double door, dimensions: (1x) 610 mm x 2340 mmand (1x) 630 mm x 2340 mm, thickness: (2x) 40 mm. Framenot included.

25

317 NN door Wooden double door, dimensions: (2x) 620 mm x 2340 mm,thickness: (2x) 40 mm. Frame not included.

25

318 NN rubber mat Rubber mat, dimensions: 1410 mm x 860 mm. 5

319 NN rubber mats 2 rubber mats, dimensions mat: 1410 mm x 860 mm, with s/swall mounted rack, dimensions rack: 910 mm x 50 mm x 140mm.

10


5

321 NN trolleys 3 cleaning trolleys, dimensions: (3x) 850 mm x 500 mm x 1100mm.

15

322 Setu AB Setu AB catalysator with Bevi motor, type: 2 SLG 200 L-4, yearof construc�on: 2001, 30/33 kW, 1472/1754 rpm, dimensions:4500 mm x 2800 mm x 3000 mm

1250


323 Setu AB Setu AB catalysator with Bevi motor, type: 2 SLG 200 L-4, yearof construc�on: 2001, 30/33 kW, 1472/1754 rpm, dimensions:4500 mm x 2800 mm x 3000 mm.

1250

324 NN baskets 44 pallets with galvanized baskets, 48 basket per pallet,dimensions basket: 620 mm x 420 mm x 140 mm.

700


400


400


700

328 NN trolley S/s trolley, dimensions: 600 mm x 350 mm x 950 mm. 15

329 Intermec Intermec label printer, model: Easycoder 501XP, serial number:07417, 100-240 V, 50-60 Hz, 2.5-1.2 A, dimensions: 480 mm x270 mm x 230 mm. Technical condi�on unknown.

10

330 Intermec 2 Intermec label printers, model: Easycoder 501XP, serialnumber: 07423 and 07394, 100-240 V, 50-60 Hz, 2.5-1.2 A,dimensions: (2x) 480 mm x 270 mm x 230 mm. Technicalcondi�on unknown.

20

331 Frigoscandia Frigoscandia GYRoSTACK spiral freezer, type: GS 51W-12-16-08WW CR, North-North, order: O-1120040 M-7220002, deliverydate: 980306, belt width: 430 mm, ou�eed height: 3000 mm,with Retech Refrigera�on Technologies A/S evaporator, type:LSN 1874/1277-7-11-1, number: 585701, refrigerant R717,volume 405 liter, design pressure: 22 bar, test pressure: 29 bar,minimum temperature: -50°C, maximum temperature: 120°C, total dimensions: 7800 mm x 4600 mm x 3300 mm. Locatedin Sölvesborg, viewing and pick up in consulta�on withIndustrial Auc�ons.

7900


General Terms of the online auc�on

Ar�cle 1. Defini�ons

Delivery: the actual delivery of the lot to the buyer or to his authorized representa�ve;

Bid: each by a user in the auc�on (for a lot) bid amount;

User: the one who has registered on the website;

User Agreement: the agreement between Industrial Auc�ons and the user;

Lot: an ar�cle, or a number of ar�cles that are auc�oned together (under one number);

Purchase Price: the amount of the highest -allocated- bid increased by the Buyers

Premium above the highest bid and the VAT owed;

Purchase Agreement: the purchase agreement between buyer and seller;

Buyer: the user to whom the lot is allocated;

Registra�on: registra�on of the user on the website by comple�ng the registra�on form

found on the website;

Specific Online Auc�on Terms and Condi�ons: besides, in addi�on to or devia�ng from

these General Terms and Condi�ons, applicable regula�ons that apply, as stated on the

website for the specific auc�on;

Alloca�on: the declara�on of Industrial Auc�ons that a lot or combina�on of lots has

been allocated by payment of the purchase price to the highest bidder. Seller hereby

irrevocably authorizes Industrial Auc�ons to assign and sell ar�cles on behalf of the

seller(s);

Auc�on: internet sales organized by Industrial Auc�ons of movable goods;

Seller: the person(s) a lot is being auc�oned in whom/whose commission;

Website: website www.Industrial-Auc�ons.com, which is maintained by Industrial

Auc�ons, based in Oirschot;

Ar�cle 2. Applicability

2.1 These General Terms and Condi�ons apply both to the rela�onship between sellers

and Industrial Auc�ons, as the rela�onship between users/buyers and other third

par�es on the one hand and on the other hand Industrial Auc�ons. These condi�ons

therefore apply to (being) organized auc�ons by Industrial Auc�ons and through the

par�cipa�on in auc�ons by users and/or buyers.

2.2 The applicability of other General Condi�ons than the present, and (where

applicable) the Specific Online Auc�on Terms and Condi�ons is excluded.

Ar�cle 3. Registra�on on the website and the use

3.1 By registra�on on the website a user is able to follow the progress of auc�ons on the


/media/uploads/2017/08/30/terms-and-conditions-industrial-auctions.pdf

website. The user agreement is not transferable. By registra�on the user provides his

personal details to Industrial Auc�ons and chooses his own password to access the

website.

3.2 Industrial Auc�ons confirms the registra�on by e-mail to the user on the specified e-

mail address, a�er which user can gain access to the auc�on by using his chosen

password. User is obliged to behave a�er granted access to the website and do not

inflict damage to the website or to other users. User is liable for all ac�vi�es that occur

on the website a�er that access has been gained by using the password of user.

3.3 The user guarantees the accuracy and completeness of the provided personal details

at registra�on. If the personal details change at any �me, the user is obliged to inform

Industrial Auc�ons by return of such change(s).

3.4 Industrial Auc�ons reserves the right to refuse registra�on and to terminate

unilaterally, without giving a reason.

3.5 Industrial Auc�ons takes obtained personal data in records kept for that purpose.

Through registra�on on the website, the user gives consent to the use and the storage

and processing of the personal data recorded.

3.6 The user is forbidden to reproduce the website or any part thereof or make available

(through deep linking or otherwise) without the prior wri�en consent of Industrial

Auc�ons. Intellectual property is retained by Industrial Auc�ons.

3.7 By (one-off) registra�on user accepts these General Terms and Condi�ons each �me

that user logs on to the website and whether or not bids.

Ar�cle 4. The auc�on

4.1 Industrial Auc�ons reserves the right to cancel an auc�on earlier than reported on

the website or to extend one. In case of a technical malfunc�on of the website, causing

it not complete and/or inaccessible to all users, Industrial Auc�ons reserves the right to

extend the auc�on.

4.2 The effec�veness of the internet and its website depends on many factors and many

others. Industrial Auc�ons is not in control of many factors and can accept no liability for

things they are not in control off. User and seller declare themselves familiar with and

agree with the special circumstances of an internet auc�on and with the technical

imperfec�ons that can arise. Industrial Auc�ons must therefore limit its liability. For

example, it may involve down�me, interrup�ons, delays in the connec�on,

maintenance, updates, viruses, limited accessibility, et cetera et cetera. Industrial

Auc�ons is not liable for any damage that might result therefrom.

4.3 Industrial Auc�ons hereby exclude to both the user and the seller any liability for any

damage directly and/or indirectly, in any way arise, including but not limited to the

damage arising from the use of the website, unless there is intent or willful recklessness

of Industrial Auc�ons.

4.4 Industrial Auc�ons also accepts no liability for any damage whatsoever that arises in


any way by and/or arising from:

- Ac�ons by the user that may have been prompted by informa�on placed on the

website;

- The impossibility of using the website (completely) and/or another malfunc�on in the

website or the suppor�ng system;

- The failure of the lots to the specifica�ons as reported on the website;

- The fact that the informa�on on the website is incorrect, incomplete or out of date;

- Errors in the so�ware and/or the suppor�ng system of the website;

- The unlawful use of systems, including the website of Industrial Auc�ons by a third

party;

- Acts of the seller a�er the user has concluded a purchase agreement;

4.5 Industrial Auc�ons organizes online auc�ons on behalf of sellers. She does not sell

own products. Industrial Auc�ons reserves the right to cancel an auc�on, earlier than

reported on the website, or to extend one.

Ar�cle 5. Security

5.1 Industrial Auc�ons strives to secure its systems against loss of data and/or any form

of unlawful use and takes appropriate technical and organiza�onal measures, including

taking into account the state of the technology.

5.2 Industrial Auc�ons is not liable for loss of data, damage to files, unlawful access to

computers or files, viruses spread via the website or other unlawful programs or files or

any other consequence of the use made of the website.

5.3 The website may contain links to other websites. Industrial Auc�ons has no control

over such sites and is not responsible for the content of those sites.

Ar�cle 6. Descrip�on lots

6.1 Industrial Auc�ons and the person on whose behalf the lot will be auc�oned strive

to achieve the greatest possible accuracy and clarity of the descrip�on of a lot on the

website, auc�on catalogs, other auc�on brochures, adver�sements and such, without

any liability for damages arising from incorrect or incomplete descrip�ons or other

damage.

6.2 Pipes, cables and/or other connec�ons for energy, control or produc�on that are

located on/in a lot are to be, unless expressly stated in the Specific Online Auc�on Terms

and Condi�ons stated, only sold to the first valve, fi�ng or aplied mark. Underground or

built-in connec�ons never are part of the lot, unless explicitly stated otherwise in the

Specific Online Auc�on Terms and Condi�ons.

Ar�cle 7. Adjustments; opera�on

7.1 If and insofar as any clause of these General Terms and Condi�ons is invalid or


unenforceable, the remaining clauses of these General Terms and Condi�ons will remain

valid. Industrial Auc�ons will then adopt a new clause to replace the invalid/annuled

clause, as far as possible the scope of the invalid/annuled clause shall be respected.

7.2 Industrial Auc�ons can, in addi�on to these General Terms and Condi�ons, declare

the Specific Online Auc�on Terms and Condi�ons applicable. They are therefore already

accepted by the user. In case of contradic�on prevails the clause of the Specific Online

Auc�on Terms and Condi�ons over the clause in these General Terms and Condi�ons.

7.3 The present General Terms and Condi�ons may be deviated only when this is

s�pulated in wri�ng by an authorized representa�ve of Industrial Auc�ons.

7.4 Industrial Auc�ons reserves the right to modify these General Terms and Condi�ons.

Changes take effect 24 hours a�er an e-mail is communicated to the user or if they

(digital) have been accepted comes into effect.

Ar�cle 8. Auc�on organiza�on by Industrial Auc�ons

8.1 The organiza�on, prepara�on and execu�on of the auc�on lie with Industrial

Auc�ons.

8.2 Industrial Auc�ons has the authority before, during or a�er the auc�on without

assigning any reasons:

- Not to recognize a bid as such;

- To exclude one or more users from the auc�on;

- To consolidate ar�cles into lots, to split lots and take lots from the auc�on;

- To repair mistakes made by Industrial Auc�ons in bids and/or alloca�ons, without a

user is able to make use of these errors and/or derive any rights from them;

- Lots whether or not to allocate;

- To implement other, in the opinion of Industrial Auc�ons, useful or necessary measures

or changes;

8.3 Industrial Auc�ons is authorized before par�cipa�on in certain auc�ons and/or bids

on certain lots to require prior, from the user, a bank guarantee or other form of security

to the choice and sa�sfac�on of Industrial Auc�ons (to be judged by Industrial Auc�ons)

8.4 The judgment of Industrial Auc�ons concerning what has taken place before, during

or a�er the auc�on, is binding.

Ar�cle 9. Bid; Purchase Agreement

9.1 The user can place a bid on the website on one or more lots. Every bid is

uncondi�onal, irrevocable and without reserva�on. Industrial Auc�ons and/or the seller

is/are en�tled, without giving any reason not to accept bids. Bids are placed exclusive

buyers premium and VAT. Industrial Auc�ons is authorized to place bids on behalf of

third par�es.

9.2 If a lot is accompanied by one or several other lots as a combina�on in auc�on this


shall be indicated on the page of the individual lot. In that case, there can be placed bids

first on the individual lots of the combina�on and a�er the closing of all individual lots,

offered on the combined lot. Individual lots can be allocated only if the total amount of

the highest sustainable bids on the individual lots is higher than the highest sustainable

bid on the combina�on. The combina�on will be allocated solely if the highest

sustainable bid on the combina�on is higher than the total amount of the highest

sustainable bids on the individual lots.

9.3 Bids can be placed in the form of a "sta�c bid" or a "proxy bid". In a sta�c bid, the

user places a bid in the form of a fixed amount per lot. In a proxy bid the user indicates

the maximum price he is willing to pay for the lot. The auc�on system then ensures that,

a�er outbidding by a third party, in the name of the user, the minimally possible higher

bid is introduced, as long as the maximum indicated by the user has not been reached. A

proxy bid can only be disabled by the user by placing a sta�c bid that at that moment is

the highest bid.

9.4 The purchase agreement arises through alloca�on. Alloca�on is generally given to

the user who has made the highest bid. By applying the clause of ar�cle 9.1, through

condi�ons for alloca�on as included in the Specific Online Auc�on Terms and Condi�ons

or for other reasons at the discre�on of Industrial Auc�ons may be allocated to a

different user than the user who has placed the highest sustainable bid instead.

9.5 The buyer will get within 48 hours a�er the auc�on has been closed, at least as

quickly as possible (Saturday, Sunday and holidays not included) confirmed by e-mail on

behalf of the seller(s) that the purchase agreement has been concluded. If the user does

not get an e-mail within the period men�oned above, this means that his bid has not

been allocated. Industrial Auc�ons reserves the right not to allocate or to allocate under

suspensive condi�on(s).

9.6 The risk of the lot(s) is transferred from the seller to the buyer at the moment of

alloca�on. The seller is up to the alloca�on obliged to properly insure the goods and

maintain properly insured against fire, explosion and water damage and the�. Seller is

also obliged to take out adequate insurance and liability insurance and maintain so. The

policies and the proof of premium payment of these insurances (or at least copies of

them) must be provided by seller on first request to Industrial Auc�ons.

9.7 Industrial Auc�ons is not a party to the purchase agreement but merely mediates in

the crea�on of purchase agreements between buyer and seller. Its content is always

precisely defined. Seller and buyer realize there on the part of Industrial Auc�ons may

involve a conflict of interest. Buyer and seller hereby give permission to Industrial

Auc�ons for simultaneously serving (the interests of) the buyer and seller.

9.8 If there is a forced sale, this will be stated in the Specific Online Auc�on Terms and

Condi�ons.

9.9 In the event seller is a trustee in his capacity as receiver, ar�cle 7:19 Civil Code


applies.

9:10 If the auc�on takes place in the presence of a notary or bailiff, he will supervise the

auc�on and the bids placed there and alloca�ons.

Ar�cle 10. Guarantees, claims and indemni�es

10.1 Industrial Auc�ons sells third party products, for third par�es. Seller and buyer

realize that Industrial Auc�ons is unaware or may be of the nature, condi�on or similar

of the sold. Industrial Auc�ons and/or the seller provide regarding the lots and possible

claims of third par�es to these, no warran�es of any kind. Buyer waives all rights which

do not belong to the buyer under mandatory law.

10.2 The lots are sold in the state in which they exist on the date of alloca�on with all its

possible defects, benefits and burdens. Industrial Auc�ons and/or seller give in no

indemnity for visible or hidden defects or warranty in connec�on with completeness,

numbers, func�oning, usability, saleability, the existence or absence of rights or claims

of third par�es and or the possibility of transfer to third par�es. Defects of whatever

kind, disappointed expecta�ons of the buyer and/or receiving third par�es do not

provide any en�tlement to (damage) compensa�on and/or se�lement and/or

suspension. The buyer shall be deemed to have carefully examined the lot bought by

him beforehand.

10.3 If in respect of the lots claims of third par�es arising from property reserved,

(intellectual) property rights and/or other third party rights be exercised, Buyer shall

keep the relevant lot(s) for those third party(ies), under the obliga�on to issue this first

request to that third party(ies), or otherwise to make appropriate arrangements with

such third par�es.

10.4 The seller shall indemnify Industrial Auc�ons against each claim of third party(ies).

The buyer indemnifies Industrial Auc�ons and/or the seller against each claim by a third

party in connec�on with the purchase agreement.

Ar�cle 11. Payment obliga�ons of the buyer

11.1 The buyer has the obliga�on to pay the purchase price within three days (not

including Saturday, Sunday and holidays) a�er confirma�on of the purchase agreement

on a by Industrial Auc�ons indicated account number. Payment must be made in Euros

or in another currency indicated by Industrial Auc�ons.

11.2. The buyer is not en�tled to any se�lement or suspension.

11.3 The buyer is obliged to first request to provide (addi�onal) security (such as a bank

guarantee and or pledge). The buyer hereby grants an irrevocable power of a�orney to

Industrial Auc�ons to (do) se�le rights of pledge both before and a�er delivery on

behalf of the buyer for the benefit of Industrial Auc�ons. The buyer declares to be

authorized to do so.


11.4 In case of late payment of the purchase price 15% of the purchase price, being a

fixed amount for collec�on costs and/or extrajudicial costs, will be charged to the buyer

by Industrial Auc�ons plus the statutory interest on the outstanding amount plus 3% per

year, with effect from the date the payment had to be made un�l the date of effec�ve

payment.

Ar�cle 12. Viewing days, auc�on days, pick-up days

12.1 The seller and/or Industrial Auc�ons can organize viewing days and pick-up days.

The par�es realize that Industrial Auc�ons does not have any influence or control over

the goods, the loca�on or the circumstances in which the viewing days and pick-up days

are being organized. Therefore, Industrial Auc�ons can not accept any liability. Whoever

enters buildings and/or grounds on viewing days or delivery days does so en�rely at

their own risk. It is compulsory to follow up instruc�ons given by Industrial Auc�ons

and/or by Industrial Auc�ons hired people. Industrial Auc�ons and the seller do not

accept any liability for damage arising on viewing days, or entering the buildings or

grounds or the consequences that that entails.

Ar�cle 13. Delivery

13.1 If and as soon as the buyer has met all his payment obliga�ons, the buyer may pick

up the lot(s) at the by Industrial Auc�ons determined �mes and place on presenta�on of

a proper iden�fica�on, being the delivery. The delivery is fully at the expence and risk of

the buyer. The buyer is obligated to pick up the lot(s) not later than the date specified in

the Specific Online Auc�on Terms and Condi�ons. Industrial Auc�ons can s�pulate that

(a) certain(e) lot(s) can be picked up only a�er the picking up of other lots.

13.2 Before delivery the buyer is deemed to have fully explored the lot well and buy the

lot in the condi�on in which it is. A�er the delivery the purchase agreement can no

longer be terminated or destroyed by the buyer. Pipes, cables and/or other connec�ons

that are located on/in a lot are to be, unless otherwise provided by law or Industrial

Auc�ons expressly stated otherwise, only part of the purchased up to the first valve,

fi�ng, or the applied mark. Underground or built-in pipes, cables or other connec�ons

are not part of the purchased, unless explicitly stated otherwise by Industrial Auc�ons.

13.3 If it appears that a lot can not be delivered because of claims by third par�es or

because of the fact that the delivery would cause unacceptable damage to the buildings

or premises where the lot is situated or for other reasons appears to be objec�onable

(at the discre�on of Industrial Auc�ons), Industrial Auc�ons is en�tled to terminate the

purchase agreement. This termina�on occurs by e-mail and/or registered le�er to the

buyer at the address supplied by the buyer, wherea�er Industrial Auc�ons and/or the

seller have no further obliga�on than to refund already made payments by the buyer to

Industrial Auc�ons in respect of the purchase of the lot(s).

13.4 The buyer whose lot(s) obstructs the collec�on of other lots, is obliged immediately


a�er e-mail and/or summons by Industrial Auc�ons to the address specified by the

buyer to take care of the collec�on of his lot(s), failing which Industrial Auc�ons is

en�tled to make this collec�on and possible storage happen by third par�es for the

account of the buyer.

13.5. Ownership of the goods passes a�er delivery, but not before the buyer has fulfilled

all his obliga�ons (and the seller or other third par�es have given their consent). A�er

alloca�on the buyer is obliged to properly insure and maintain properly insured against

fire, explosion, water damage and the� and to provide the insurance policy and proof of

premium payment of this insurance on first request to Industrial Auc�ons. The buyer is

obliged to respect rights of third par�es.

Ar�cle 14. Termina�on

14.1 If the buyer fails to perform any obliga�on under the agreement with Industrial

Auc�ons or the purchase agreement, including but not limited to failure to �mely or

complete payment of the purchase price; not picking up the lot(s) in �me and/or not

providing the required informa�on for delivery, finds the buyer is legally in default

without further no�ce being required, and Industrial Auc�ons may terminate the

agreement between herself and the buyer. Industrial Auc�ons may terminate the

purchase agreement on behalf of the seller. In that case Industrial Auc�ons is allowed to

assign the lot(s) to another without Industrial Auc�ons and/or the seller is/are held to

any (damage) compensa�on.

14.2 In the event of termina�on referred to in 14.1, the buyer owes Industrial Auc�ons

in addi�on to the buyers premium a lump sum amount of 25% of the purchase price to

cover administra�ve, storage, insurance and transport costs, etc., undiminished the

right of Industrial Auc�ons and/or the seller to claim full compensa�on.

Ar�cle 15. Liability

15.1 Industrial Auc�ons works on loca�ons which she has no control over, with things

that are not hers. Therefore she must limit her liability, otherwise she runs too much

risk, while she herselve is not in a posi�on to limit the risks. Industrial auc�ons is not in

control of the sites, auc�ons, IT environments and auc�oned goods. The liability of

Industrial Auc�ons (if and when a�er applica�on of the other provisions of the contract

s�ll remaining) is at all �mes and in all cases limited to the amount to which the liability

insurance of Industrial Auc�ons in a given case en�tlement to benefits. If Industrial

Auc�ons is uninsured, the insurer will not cover grants or for whatever reason, no

payment takes place, then the liability of Industrial Auc�ons in any case is limited to €

5,000.00. Any claim on Industrial Auc�ons (both property law and contract law), is not

transferable or to encumber. This limita�on does not apply to intent or gross negligence

of Industrial Auc�ons.


15.2 Industrial Auc�ons is not liable for any indirect or consequen�al damages.

Compensa�on for indirect damage is excluded at all �mes and in all cases, including at

least but not limited to consequen�al damages, lost profits, lost savings and damage due

(corporate) stagna�on, loss of goodwill, loss of data, and such. Furthermore, any liability

of Industrial Auc�ons is excluded in connec�on with any defect of the lot(s) or in respect

of (alleged) infringement of the rights of (the intellectual property of) third par�es. The

buyer declares that he acknowledges that in respect of the lot(s) possibly rights (of

intellectual property) rest with third par�es.

15.3 Industrial Auc�ons and the seller are not liable for:

- Damage to persons or property or business prior to the closing of the purchase

agreement or prior to alloca�on arising or resul�ng;

- Damage to on, through or in connec�on with the purchased goods caused (including

the loss of the good itself);

- Visible and invisible defects. The buyer is required to do research. If the buyer neglects

that, then the consequences are for the buyer;

- Damage caused by environmentally harmful substances in or on the purchased;

- Damage caused by computer failures (both in terms of hardware, so�ware, viruses,

files, internet, all in the broadest sense);

- Damage caused by power of disposi�on of the seller or rights of third par�es which

causes damage to the buyer;

15.4 In engaging third par�es Industrial Auc�ons will always exercise due care. Industrial

Auc�ons is not liable for any shortcomings of these third par�es. For that the seller and

the buyer safeguard Industrial Auc�ons.

15.5 Any right of the buyer or the seller shall expire two months a�er the alloca�on,

notwithstanding the provisions to art. 6:89 BW.

Ar�cle 16. Applicable law

16.1 All agreements between Industrial Auc�ons and third par�es is governed by Dutch

law.

16.2 The Dutch text of the General Terms and Condi�ons is the original text. If the

General Terms and Condi�ons are used in several languages, the Dutch text will

therefore be given preference in case of ambigui�es or contradic�ons.

16.3 In the event of a dispute, the competent court within the district of “Oost-Brabant”

has jurisdic�on to hear the dispute, notwithstanding the competence to Industrial

Auc�ons to submit a dispute to the competent court according to the law.


Notes


Address: Looyenbeemd 11

5652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208 Fax: +31 (0)40 2409 209 Email: info@industrial-auc�ons.com Web: www.industrial-auc�ons.com

Upcoming auc�ons:03-07 Online auc�on machinery for the food industry and catering

equipment in Anzegem (BE) 04-07 Online auc�on machinery for the food industry due to closing

produc�on loca�on 2 Sisters Food Group in Basildon (UK) 10-07 Online auc�on dairy processing machinery used to produce

drinking milk, sourmilk, yoghurt, cream, etc. of GärdhemsMejeri in Trollha�än (SE)


mailto:[email protected]

https://www.industrial-auctions.com

Date post:	11-Aug-2019
Category:	Documents
Upload:	dangtu
View:	213 times
Download:	0 times

Closing: 18 June 2019 from 14:00 hrs. · General terms and condi ons of the online auc on Closing...

Documents