Date post: | 23-Jul-2016 |
Category: |
Documents |
Upload: | clue-machinery-advertiser |
View: | 241 times |
Download: | 0 times |
M A C H I N E R Y
SEPTEMBER 2015Volume 30 Number 9Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.comemail: [email protected]
a TOS Varnsdorf company
TOS Trade Canada Inc.415 Industrial Dr.Milton, ON L9T 5A6http://www.tostrade.com
Tel: (905) 878 0888Fax: (905) 878 [email protected]
WHN-13 CNCStructured to guaranteehigh rigidity, reliabilityand accuracy.
Wide range of technologicalfunctions
www.tostrade.com
Starting at:$499,000 US
X - 3500 mm / 137.79”Y - 2500 mm / 98.42”Z - 1600 mm / 62.99”W - 800 mm / 31.49”
Spindle 130mm / 5.1”Speed 3000 rpm
Table 1800 x 2200 mm 70.8” x 86.6”
CNC Fanuc / Heidenhain
STEVENS MACHINERY SALES INC.NEW AND USED FABRICATING & METALWORKING MACHINERY SALES & SERVICES FOR OVER 38 YEARS
2 Royalcrest Road, Etobicoke (Toronto) ON, Canada M9V 2L5 Phone: 416-798-3611 Toll Free: 1-866-798-3611www.stevensmachine.com email: [email protected]
SERIES 4The press is totally pneumatic providing 6 tons of force and has a 45.7 cm / 18" throat depth which provides clearance for a variety of chassis configurations.It is designed to install self-clinching fasteners in size M2 / #0 thru M10 / 3/8" in steel, and sizes up to M12 / 1/2" in aluminum panels and circuit boards.
NEWSTANDARDFEATURES
Stroke Counter
Laser Pointer
Lockable Tool/Accessories Storage
Cabinet
1000 lbs. to 6 tons.
FEATURES AND BENEFITS
WITH AUTOMATIC FEED
® ®
tools and accessories storage.
™
The PENSERTER Series 4 press with automatic feed provides 6 tons of force and has a 45.7cm / 18" throat depth which provides clearance for a varietyof chasis configurations. It is designed to install self-clinching nuts, studs, and standoffs in sizes M2.5 to M6 / #2-56 to 1/4".
SERIES 4 SERIES 2000This automatic fastener-installation press system incorporates upgraded operating features and expansion capabilities topromote streamlined job productivity and quality. The press offers the idealtechnology to install all types of self-clinching fasteners rapidly, reliably, and permanently in thin metal plate.
FEATURES AND BENEFITSFEATURES AND BENEFITS
®® ® ®®®
STEVENS MACHINERY SALES INC.2 Royalcrest Road, Toronto ON, M9V 2L5
Phone: (416) 798-3611 Fax: (416) 798-8439Email: [email protected] Website: www.stevensmachines.com
PLEASE CALL, VISIT OR SEE MY WEBSITE!
LARGEST INVENTORY OF USED SMALL PUNCH PRESSES IN CANADA!
NEW MIDWEST DEBURRING MACHINE – 100% MADE IN THE U.S.A!
NEW GADE CNC HYDRAULIC PRESS BRAKES – MADE IN ITALY!
NEW COASTONE SERVO-ELECTRIC CNC PRESS BRAKES!
NEW PEMSERTER INSERT PRESSES!
AIR COMPRESSOR – 5 HP, VERT. 60 GAL. 550 V-$595.00AIR COMPRESSOR – 5 HP, HOR.80 GAL, 575V -$950.00BEADER-JORG, 21 G, 6” TH, ¾ HP, 575 V -$1,950.00BRAKE-ALLSTEEL, 10 FT X 70 TON, 575 V - $12,500.00BRAKE-HACO, 12 FT X 165 TON, 6 AXIS CNC-$54,500.00 BRAKE-WYSONG,12 FT X 140 TON,2 AXIS CNC-$37,500.00DEBURRING– 37”W,CEMCO,SCOTCHBRITE ROLL -$19,500.00DEBURRING– 37”W,CEMCO,SCOTCHBRITE ROLL -$19,500.00DEBURRING–37” WIDE, 1 HEAD, MIDWEST BELT-NEW - PORDEBURRING-37” WIDE, 2 HEAD, MIDWEST BELT/BELT- PORD-BUR-R-FALLS,SHEET EDGE, # 99, 115 V - $1,500.00D-BUR-R–FALLS, SHEET EDGE, # 121,115 V - $4,950.00DIE SHOES – GOOD QUANTITY, VARIOUS SIZES – P.O.R.DRILL PRESS–#3 MT,IBARMIA, G.H. PWR FDS -$3,950.00DRILL PRESS-#3 MT, IMA,GH HD,PWR FEEDS -$3,950.00DRILL-RADIAL-#3 MT, KING, 22”, 220/60/1 -$1,950.00DRILL-RADIAL-#3 MT, STANDARD, 24” ARM, -$3,950.00GRINDER-SURFACE-6”x12”,CHEVALIER,MANUAL -$2,500.00 INSERT PRESS-6 TON, PEMSERTER,#4,NEW-US.-$9,750.00INSERT PRESS-6 TON,PEMSERTER,#4AF,NEW-US$15,750.00INSERT PRESS – 6 TON, HAEGER,(AS IS) -$2,500.00 IRONWORKER-50 TON, HACO SHARK, 10 HP -$7,950.00LATHE-12” SW X 30” CC STANDARD MODERN -$3,950.00MILL-TURRET,R8,COMET, 50”x10”,3HP,575V -$3,500.00MILL-TURRET, R8, 11” x 49”,TOS,16 SPDS -$3,950.00MILL-TURRET, #40 MT, 12”x 54”, V.S, DRO -$4,950.00MILL-UNIVERSAL,DECKEL,FP2LB,3HP,550 VOLT-$7,950.00NOTCHER UNIT – C/W: 2 NOTCHERS, AIR/OIL -$3,750.00PANTOGRAPH, DECKEL, # G1L, 2D, 110 VOLT -$1,500.00PRESSES-KICK, 5 TON, ROPER 58,WHITNEY 68-$1,350.00PRESS - ARBOR– 3 TON, GREENERD, 6” TH. -$350.00PRESS – 1 TON, DENISON, HYDRAULIC, 110 V-$1,250.00PRESS – 2 TON, ALCECO, ¼” ST, 110 VOLT -$2,150.00PRESS – 2 TON, ALVA ALLEN, ¾” ST, 110 V -$2,150.00PRESS – 2 TON, BENCHMASTER, 1”ST, 110 V -$1,850.00PRESS – 3.5 TON, ALCECO, 12” TH, 110 V -$2,500.00PRESS – 4 TON, ALCECO, 1-1/4” ST, (8) -$2,250.00PRESS – 4 TON, AZIMUTH, 9”SH., 110 VOLT -$2,950.00
PRESS – 4.5 TON, FAMCO, 1-1/2” ST, (2) V-$2,150.00PRESS – 5 TON, ALVA ALLAN, 1-1/4” ST,(4) -$2,250.00PRESS – 5 TON, BENCHMASTER, 1” ST,,110 V -$2,250.00PRESS – 5 TON, ROUSSELLE, 1-1/4” ST, 110V-$2,450.00PRESS – 6 TON, AZIMUTH 1-1/4” ST, 575 V -$2,950.00PRESS – 6 TON, AZIMUTH, 1-1/4” ST, 110 V -$2,950.00PRESS – 10 TON, ROUSSELLE, 2” ST, 110 V -$2,950.00PRESS – 15 TON, ROUSSELLE, 2” ST, 110 V -$2,500.00PRESS – 15 TON, ROUSSELLE,2” ST, 18” TH -$3,500.00PRESS – 20 TON, BLOW, 2” ST, 1 HP, 575 V -$2,850.00PRESS – 25 TON, ROUSSELLE, 3” ST,AIR/MECH-$4,250.00PRESS – 33 TON, ALCECO, 2-1/2” ST, 575 V -$4,950.00PRESS,- 55 TON, BLOW, 4” ST, 5 HP, 550 V -$5,500.00ROLLING MILL, IRM, 2 HIGH, 6” W X 4” OD -$35,950.00ROLLS – PINCH, 36” X 22 G, 2” DIA, MANUAL - $750.00SAND BLAST CABINET, EMPIRE,S-20, 110 VOLT - $850.00SAND BLAST CABINET, EMPIRE, PF-3648 SRB-4-$3,950.00SANDER, STROKE, PROGRESS,8 FT,5 HP,550 V -$2,500.00SAW – ROLL-IN, E.R.MAIER, 10” X 12”,115 v-$2,995.00SAW–DBLE MITRE, PISTORIUS, 2 X 12” BLDES -$1,500.00SAW – VERT BAND, 20” TH, STARTRITE, VS -$3,950.00SAW – VERT BAND, 20”TH, T JAW, VS,WELDER -$3,950.00SHEAR – 48” X 16 G, GENERAL, FOOT, -$1,750.00SHEAR – 54” X 16 G, BARTH, FOOT, 19” GAP -$3,250.00SHEAR – 54” X 16 G, B & B, AIR, 19” GAP -$4,950.00SWAGGER-TORRINGTON,ROTARY,7/8”TUBE, 3 HP -$8,750.00TUBE BENDER-BLUE BOY, HORIZ, 3”, TOOLING -$7,500.00TUBE BENDER-DI-ACRO, # 2 MANUAL, TOOLS - $1,450.00TUBE BENDER-DI-ACRO STYLE, #2 MANUAL - $1,450.00TUBE CUT-OFF-CONTINENTAL, #6A,7-1/2” OD -$12,500.00UNCOILER – EGAN, 600 LB, 1/4 HP, 110 V -$1,650.00UNCOILER – EGAN, 600 LB, 1/4 HP, 110 V -$1,650.00UNCOILER – DURANT,1,000 LB, ½ HP,110 V - $1,250.00UNCOILER – MANUAL,5,000 LB, 24”W X 60”OD -$1,000.00WELDER – SPOT, 10 KVA, WELDOMATIC,12” TH -$2,950.00WELDER – SPOT, 25 KVA WELDOMATIC,7-1/2”TH-$4,500.00WELDER – PROJECTION,100 KVA,24” TH, 575 V-$5,950.00WELDER – PROJECTION, 75 KVA, 12” TH, 460V-$5,950.00
Page 2 Clue September, 2015
Clue September, 2015 Page 3
PAGE 4 CLUE, September 2015
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com
BENDERS, HYDRAULIC2-1/2" SOCO, SB-63NCMP (2005), Hyd. Mandrel Type, Touch Screen PLC Ctl
5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling
BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i
BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC
35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op. Manual Gauge
45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety
50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis
60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains
70 Ton x 10’ ALLSTEEL, CNC, Automec, Light curtains
70 Ton x 10’ ALLSTEEL, Hyd.
75 Ton x 10’ “NEW” ACCURPRESS, CNC
88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis touch screen
93.5 Ton x 87" TRUMPF, Trubend 5085 (2011), 6-Axis, Like New
110 Ton x 10’ HACO, PPM 30100, CNC, 2-Axis ATL500
11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System 5000
120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge
130 Ton x 10’ “NEW” ACCURPRESS, CNC
130 Ton x 14’ ACCURPRESS, ETS3000 (2005)
138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7 Axis touch screen
140 Ton x 10’ WYSONG, CNC, Automec
143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid CNC
175 Ton x 12' ACCURPRESS (1997), 2-Axis CNC
200 Ton x 12’ “NEW” ACCURPRESS, CNC
235 Ton x 12’ ACCURPRESS, Accell 523512 (2006), Mint!, Fully Loaded
250 Ton x 12’ “NEW” ACCURPRESS, CNC
DRILLS, COLUMN & BENCH1-3/8"cap “New” DRILLMASTER, Z5035, Geared Head
DRILLS, RADIAL3’ arm “New” TONE FAN, RD-900
3’ Arm SUNLIKE, 1500rpm, w/work table
9’arm SHENYANG, Box table
GRINDERS, CYLINDRICAL5"x 13" JONES & SHIPMAN, 1212E
GRINDERS, SURFACE, RECIPROC6" x 18" “New” KENT, KGS-200
8"x 18" FREJOTH, Automatic, Hyd.
12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB
HONESSUNNEN, MBC-1804M & MBC-1802MR, Power Stroke, Horiz.
SUNNEN, MBB-1660K, Manual
SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet
IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle
LASERS2000 Watt - 33 Ton AMADA, ApelioIII, 375V, Hyd Punch/Laser Machine
3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’
3200 Watt TRUMPF, Lasercell, 5-Axis
4000 Watt AMADA, FO3015 (2002), 5’ X 10’, w/Shuttle table
5000 Watt TRUMPF, L3050 (2005), 5’ x 10’
LATHES, ENGINE12" x 40" “New” MORTON, F1900-AEG (2001), Single Phase
18" x 60" “New” POWERTURN, 460
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar cap
HAAS, SL20T (2005)
MORI SEIKI, SL150S (1997)
MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y Axis Milling, 10"Chk, Live holders
MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill cap
HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore
ROMI, M17 (2007) 17"x 43", Fanuc 21i, 8"Chk
TOOLMEX, TUR560MN-2000 (2012) 22"x 78.7", Siemens 840D, 16" Chk.
TOOLMEX, TUR630AMN-3000 (2008) 24.8"x 118", Siemens 840D, 16” Chk.
MACHINING CTRS, HORZTOYODA, FH100 (1989), Twin Pallet
MAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 control
OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000
HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!
MACHINING CTRS, VERTHAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm
FADAL, VMC40, X-22" Y-16" Z-20", CNC 88 Ctrl
HAAS, VFOe (2000), X-30" Y-16" Z-20"
LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta CNC Control
MIKRON, HSM-600U (2006), X-31.4" Y-23.6" Z-19.7", 5-Axis high speed
MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpm
MILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 control
DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5", Fanuc O-MC
MILLS, VERTICAL9" x 49" "NEW"MAGNUM-CUT, VM-2V, 3hp
10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp
12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S
14"x 49" TOS, FGV32 (1997)
NOTCHING MACHINES5/32" x 8-7/8" x 8-7/8" (NEW) BOSCHERT, Hydraulic
1/4"x 8.6"x 8.6" EUROMAC, Hyd. Notcher w/Bending Attachment
PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II
PRESSES, OBI80 Ton ROUSSELLE, 8B-48, 48” x 22” Bed, OBI
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed
PRESSES, STRAIGHT SIDE800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like New!
PUNCHES, SINGLE STATION25 Ton PIERCE-ALL
60 Ton FABMASTER (2011), Like new
PUNCHES, TURRET22 Ton TRUMPF, TC2020R (2011), 50"x 100", Like New
25 Ton TRUMPF, TC500/1300, 50"x 100"
33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P
33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I
ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic
2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV
6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout
ROLLS, PLATE BENDING1.575"x 10" MG, Hyd, 4-Roll
1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch
SANDERS24" TIMESAVER, Series 2100 (2008), Wet
SAWS, BAND, HORIZONTAL10"x 15" "NEW" ACRA, Speeder FHBS-250V
10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz, PLC Control
12"x 14" RAM, Semi-Auto
SHEARS, POWER SQUARING1/4"x 10’ "NEW" ACCURSHEAR, No.625010
1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic
3/8"x 8’ ACCURSHEAR (1998), Hydraulic
MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65
Barfeeds LNS, Servo S3 (2007), w/Remote pendant
Gundrill 3/4" x 30", ELDORADO
Insertion Press 8 Ton, HAEGER
Insertion Press 8 Ton, PEMSERTER, Series 2000 (2002), PLC control
Sinker EDM AGIETRON, Advance 2, X-11.8" Y-9.8" Z-9.8"
Spot Welder 20 KVA, SIP
Wire EDM, CNC AGIECUT, Classic 2S (2002), X-13.7" Y-9.8" Z-10"
Wire Machinery "NEW" METALEX, WT250, Wire Nibbler
NEW
Page 4 Clue September, 2015
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com
138 Ton x 10’, AMADA, FBDIII-1253NT,CNC Press Brake
93.5 Ton x 87”, TRUMPF, Trubend 5085, 2011, CNC Press Brake, Like New !
NEW Accupress CNC Hydraulic Press Brakesavailable from stock
TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control
22 Ton, TRUMPF, TC2020R, 2011,CNC Turret Punch, Like New !
88 Ton x 8’, AMADA, FBDIII-8025NT,CNC Press Brake
Clue September, 2015 Page 5
MACHINE TOOL SPECIALISTS
Authorized agent for Québec and the Maritime Provinces for:
Seguin Machinery Ltd. 1731 Rte Harwood, Vaudreuil-Dorion, Québec, J7V 8P2
Tél: 514 935-3531 Fax: 514-932-4459 Sans Frais 1-800-962-3531 www.seguinmach.com [email protected]
Used 2012 Feeler CNC Lathe
Scan for Generic Feeler Video
Page 6 Clue September, 2015
DUE TO OWNER RETIRING
SECROFT METAL PRODUCTS HVAC Sheet Metal Fabrication
350 Woodbridge Ave, Unit 17, Woodbridge (Toronto), Ontario, Canada
Auction: Wednesday September 9, 11:00 AM (ET)Inspection: Morning of Auction 9am – 11am
PINNACLE INDUSTRIAL AUTOMATION 5’x12’ Plasma Cutting TableFLAGLER Duct Flange Machine, Model DF2 35-300
LOCKFORMER Model 22 Quad RollformerEDWARDS 8’ x 1/8” Power Shear
SURPLUS TO THE ONGOING OPERATIONS
PNEUTECH ROUSSEAU CNC Turning & Machining
3121 Welham Road, Barrie (Toronto), Ontario, Canada
Auction: Wednesday September 16, 10:30 AM (ET)Inspection: Tuesday September 15, 9am - 4pm
(4) CNC Lathes by: OKUMA & MAZAK, Up To 3” Bore(3) Lathes by: TOS & CLAUSING, Up To 24” x 14’, Plus 6” Bore
CNC Vertical Machining Center(4) Mills & Radial Drills
SURPLUS TO THE ONGOING OPERATIONS
RJ CYR CO. INC. Heavy Duty Fabrication
5015 8th Concession, Maidstone (Windsor), Ontario, Canada
Online Only Auction – Bidding Ends Thurs. September 17, 1:00 PM (ET)Inspection: Wednesday September 16, 9am - 4pm
HEM SAW Model WF-130HA-DC PACIFIC 12’ x 400 Ton Press Brake
PROMECAM 12’ x 220 Ton Press Brake TOS Horizontal Boring Mill Model WH63
FREIGHTLINER Flat Bed TruckTALBERT Trailer
A U C T I O N S • L I Q U I D AT I O N S
F I N A N C I N G • A P P R A I S A L S
9 0 5 . 6 6 9 . 8 8 9 3i n f i n i t y a s s e t s . c o m
Like us at: facebook.com/Infinity-Asset-Solutions-Inc
Follow us at: twitter.com/InfinityAssets
PUBLIC AUCTIONS
Bid Live Onsite & Online Via
Bid Live Onsite & Online Via
Bid Online Only Via
Clue September, 2015 Page 7
Page 8 Clue September, 2015
Page 8 / Steel Marketplace / JULY 2007
�
• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •
VISIT US AT:www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com
22 TON TRUMPF, TC2020R BOSCH,TURRET PUNCH, 50” X 100”,MFG:2011APPROX. 3100 HOURS STOCK #10321
93.5 Ton, TRUMPF TRUBEND 5085, PRESS BRAKE, 6 AXIS BACK GAUGE,MFG:2011
STOCK #10322
TRUMPF TRULASER 3030 5 KW, LASER, 5’ X 10’ , MFG:2012 10000 LASER ON &
6000 BEAM ON, STOCK #10278
TRUMPF TRULASER 3040, LASER,4000 WATT, 80” X 160”, DUAL PALLET,
MFG:2011, STOCK #10260
33 TON, AMADA, PEGA 345Q, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG: 1993 STOCK #10283
143 Ton, AMADA, HDS-1303NT,PRESS BRAKE, AMNC-PC 8-AXIS,
MFG:2005, STOCK #10245
AMADA LC3015F1NT, LASER, 4000 WATT,5’ X 10’, AMS-3015 10 SHELF LOAD/UNLOAD
SYSTEM, MFG:2009 STOCK #10187
AMADA, LC1212A3XL, LASER, 2000 WATT,4’ X 8’, 17,000 HOURS, NEW TURBO BLOWER,
MFG:2004, STOCK #10175
4000 WATT AMADA FOM2 3015NT LASER W/AUTOMATIC NOZZLE CHANGER, 23,300 HRS.
MFG: 2012, STOCK #10297
AMADA,GEMINI FO-3015NT, LASER,4,000 WATT, 5’X10’,MFG:2007
APPROX:45,500 HOURS STOCK #10298
143 TON, AMADA HFE 1303,PRESS BRAKE, OPERATEUR II,
MFG:2005, STOCK #10324
72 TON, TRUMPF TRUBEND 3066,PRESS BRAKE, 4-AXIS, LOW HOURS,
MFG:2008 STOCK #10286
Clue September, 2015 Page 9
Page 10 Clue September, 2015
7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]
USED MACHINERY
OTHER SERVICES» On-Site spindle taper grinding» Machine tool calibration and metrology» Mechanical, Electrical and CNC field service» Installations and plant moves» Spare parts including exchange programs» Authorized distributor for Heidenhain, Fagor, Fanuc FA, Siemens and Renishaw.» Certified Appraiser on staff» Way Grinding
Subscribe to our mailing list
Vertical LathesBERTHIEZ
SCHIESS
BULLARD
OKUMA + HOWA
62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 407940” table, 55” swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071Man-Au-Trol, 42” table, equipped with side head, from an aerospace facility, gently used, Stock No.4205ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219
Horizontal Lathes“NEW”
“NEW”
MAZAK
RD&D
SAFOP
OKUMAHITACHI
MORI SEIKI
OKUMA+HOWA
SMTCL
DMG
DMG
20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, stock 403920” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, 2 available, stock 4036 and 4037Slant Turn 40N-ATC Millcenter 1000, Fanuc Control64" x 170", sliding bed type gap lathe, 16" hole through spindle, GN10 CNC control, Stock No. 384963" x 236", C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 379115” x 36”, LU-15 CNC Lathe, 1995, Stock No. 358029” swing, Turret Lathe, 6.25” hole through, Stock No. 318327” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 417311” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157HTC2050, 8”x20”, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.CTX-310, 2006, 200mm turning diameter, 330mm swing, 51mm bar diameter, 3000 hrs, glass scales.CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.
Surface & Blanchard GrindersFAVRETTO
ARTER
SHIBAURA
Model No. MG300 2T, Siemens CNC Control, 60” x 120” x 28”, two heads, reconditioned, you won’t find a nicer grinder on the market.Rotary Surface, Horizontal Spindle, Stock No. 3827
48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684
MiscellaneousIEMCA
DANDREA
DO-ALL
AMADA
ARCHDALE
PRATT & WHITNEY
AMERICAN
PFAUTER
FLOOR PLATES
Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock No. 4066
CNC facing head
Horizontal Bandsaw, Model C-916A, Stock No. 3466
Punch Grinder, Stock No. 3463
Granite Table, 150" x 150", Massive!, Stock No. 3418
Radial Drill, Stock No. 4211
Jig Grinder, Model No 20, Pratt and Whitney rotary table,
from an aerospace facility, gently used, Stock No.4215
Radial drill, 5’ arm, 17” column, 5MT spindle taper, power
quill travel, Stock No. 4237
Gear hobber, Model P900 Turbo, 36” max workpiece
diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x
9” long, Auto hob shift, swing away tailstock, change gears,
Stock No. 4253
Various sizes
Machining CentresTOS
LEADWELL
BRIDGEPORT
BOSTOMATIC
12” x 51”, Model FV 25, FAGOR CNC control, box ways, priced to sell, Stock No. 3710
20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453
20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159
32G Graphite VMC, 42K spindle, 4th axis.
Cylindrical GrindersSCHAUDT
B&S13” x 27”, Universal Heavy Duty, Stock No. 3826
10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock No.3825
Horizontal Boring MillsTOS
SCHARMANN
SUMMIT
WD130, 130mm spindle, Floor type boring mill, FAGOR 8055 CNC, 232” x 97” travel, 90” x 84” G&L table, linear scales, under power, Stock No. 4353
125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”
130mm Spindle, New in 1989, 79” x 72” table, good travels, facing head, pendant controls, good condition.
Milling MachinesHECKERT
DARBERT
16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal, Stock No. 3686
9” x 42”, Turret Style mill, Stock No. 3458
CMTSBooth #2019
Clue September, 2015 Page 11
Address: 2783 Portland Dr. Oakville ON L6H 6M6 Tel: 905-829-1579 Email: [email protected] Website: www.smtcl.com www.smtcl.ca
CY-K800B/3000 • Distance Between Centers: 118” • Swing Over Bed: 31.5” • Swing Over Cross Slide: 20.5” • Width of Bed: 23.6” • Spindle Bore: 5” • Spindle Speed: 22-1200rpm • Main Motor: 20HP
CY-K510n/1500, CYK510n/2000 • Distance Between Centers: 59” to 79” • Swing Over Bed: 19.7” • Swing Over Cross Slide: 11.4” • Width of Bed: 15.4” • Spindle Bore: 3.2” • Spindle Speed: 35 – 2500rpm • Main Motor: 10HP
New Arriving Teach-in CNC Lathes With Fagor Control: Fagor 8055i-TC Control, 2-axis drive motor, heat exchanger, full cover door, (10”/16”) 3 jaw chuck, 4-position turret, electric hand wheel, steady rest, follow rest, damping washer, absolute encoder
Special Deal For New Machineries!
New Arriving 3-Axis CNC Turning Center (SCHIESS - German Design): FANUC Oi TD control, α servo spindle motor with manual guide Horizontal 12 position DM servo turret, 1 axial live tool, 1 radial live tool and 10 standard tool holders
VIVA T2Sm/500 • Max Swing Diameter: 22” • Max Cutting Length: 19.3” • Spindle Hole Diameter: 3.5” • Spindle Speed Range: 30-4000 rpm • Main Motor Output Power: 15/18.5 kw
Canada Inc.
VIVA T4Cm/1000 • Max Swing Diameter: 28.3” • Max Cutting Length: 40” • Max Cutting Diameter: 20” • Spindle Speed Range: 30-3000 rpm • Main Motor Output Power: 22/30 kw
Page 12 Clue September, 2015
Latest Installation by FERRIC Machinery
FERRIC-ERMAK EPL 5 x 10ft HPR130XD plasma cutting center at Edalica Metals, Mississauga, ON
With this latest addition, Edalica Metals has now a full equipped metal shop.The FERRIC-ERMAK EPL plasma center allows cutting mild steel up to 1 1/2” and bevel cutting head.Equipped with the Hypertherm Edge Pro controller and through hole technology and nesting, allowing accurate part and hole cutting with a minimum of set up and quick turn around.For all cutting needs and information contact Ed at: [email protected]
www.ferr icmachinery.com
All FERRIC products are sold with installation and training.Local service by our local FERRIC team.
For more information on the FERRIC-ERMAK products visit:
FERRIC Machinery Inc.3980 Chadburn Cres, Mississauga, ONTel: 905-820-3232 [email protected]
Westside Service Ltd.122 Broxburn Blvd, Lethbridge, AB
Tel: 403-380-5047 [email protected]
PUNCHES • DIES • SHEAR BLADES • COUPLING NUTSALL IN STOCK!!
FABTEC Machine Tools Solutions Inc.790 Redwood Square, Unit 13, Oakville, ON L6L 6N3
1-877-322-8322 • Ph: 905-469-1586 • Fax: 905-469-3054Please Visit Our Website For More Info:
www.fabtec.ca
PUNCHES & DIES SHEAR BLADESPUNCHES, DIES andSHEAR BLADES for:
• EDWARDS• ENERPACK• GEKA• HOUGAN• KINGSLAND• MUBEA• PIRANHA• NITTO KHOKI• PEDDINGHAUS• SCOTCHMAN• WHITNEY• FABMASTER
DIE HOLDER
URETHANE STRIPPERS
MACHINE TOOL SOLUTIONS INC.F A B T E CI I
COUPLING NUTS
Trans-Canada Liquidations (TCL) has been in business since 1958 and offers the following services:
AUCTION SALES: We conduct auction sales right across Canada and have facilities in the USA. We will purchase any type of manufacturing company for cash or sell on a commission basis.APPRAISALS: We have certified appraisers on staff who can appraise all types of machinery and equipment; woodworking, printing, chemicals, fabricating, tool & die, construction, aircraft, foundries, etc...(in the strictest confidence).LIQUIDATIONS: We are able to conduct all types of Liquidation Sales, and can show you where more money can be realized. Complete liquidation is assured; our efficient organization enables us to handle numerous sales a week.MERGERS & ACQUISITIONS: There is a separate department for Mergers and Acquisitions, and we have been very successful in buying and selling both ongoing and bankrupt companies for clients. We represent various groups interested in purchasing manufacturing businesses.Our clients are Federal and Provincial Governments, Financial Institutions, Chartered Accountants, Trustees in Bankruptcies and Private Corporations.No proposition is too large to arouse our interest. The next time you have a plant with an uncertain future... get in touch with TCL for fast action.
TCL Asset Group Inc.
LET US WORK FOR YOU
4610 Dufferin Street, Suite 209Toronto, Ontario, Canada M3H 5S4www.ManagingYourAssets.com
Contact: NORM JACOBSTel: 416-736-1367 or Fax: 416-736-4159
Email: [email protected]
WE APPRAISE • WE LIQUIDATE • WE AUCTION
Clue September, 2015 Page 13
7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959
Email: [email protected]: www.walkermachinery.com
MAS VR8A98” Radial Drill
BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63”x 86” travels, Fanuc 31i control new 20124.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capGRINDER, SURFACE6”x16” OKAMOTO 618DX2, mag chuck, coolant, excellent condition!LATHES, ENGINETOS SN 400N, 16"x 80", (2003) 2-Axis, DROENTERPRISE, 20"x 120"TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy duty
LATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981MACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO
PAGE 30 CLUE, December 2013
AIR COMPRESSORS
JUN AIR 15 litre 120psi
QUINCY 5hp
DRILLS
BUFFALO
ALLEN drill press, 3ph
ARBOGA (G1304) Bench top drill
WESCO Mill/Drill press
HERBERT 15" 3ph
CINCINNATI BICKFORD 24"
FORK LIFT TRUCKS
TOYOTA 3000lb 3 wheel
TCM 5000 lb propane, 4 stge mast, side shift
NISSAN 5000lb propane, 3 stg mast, side shift
TCM 10000 lb Propane, 3stge mast
Assorted Pallet Trucks
HYSTER 15000 lb propane, 3stge mast, side
shift
GRINDERS
BALDOR 3/4hp pedestal grinder
BALDOR 2hp 10" double end ped. Grinder
THOR Pedestal grinder
JONES & SHIPMAN Surface Grinder 540,
550v, 3ph
BROWN & SHARPE 10"x 24" Cylindrical
LATHES
STANDARD MODERN 11"x 20"
CHIEN-YEH 14"x 36" 24" gap
SOUTHBEND 14"x 36", single phase
TOS (SV18RA) 15"x 60"
HARRISON (M400) 16"x 40"
VOEST 17"x 60"
MILLS
WESCO Mill/Drill Press
HONEYWELL Light curtains
FIRST (LC-20VSG) w/Readout
EXCELLO (602)
HASCO 9"x 42" R8 taper
FIRST (LC-20VSG) 10"x 51" 40 taper
TOS (FA3AV) 12"x 54" 40 taper
PRESSES
ARBOR (#2)
GREENERD (#3a) Arbor Press
JET (#3) Arbor Press AP3
ALGOMA 50T H Press, 575v, 3ph
BUFFALO 100T H press
ROLLS
B&B 36" x 18ga Hand Rolls
NIAGARA 4’ Initial Power Pinch rolls
SAWS, BAND, HORIZONTAL
CRAFTEX 10" table saw
GREENLEE (1346) 7"x 10" single phase
SAWS, BAND, VERTICAL
RIGID (MS1065LZA) 10" compound mitre saw
HOE JUN (HV400)
CLIPPER (BBC156) 14" Concrete saw
MAKITA 14" Chop saw, single phase
MEP (Rabbit 351) 14" Cold cut saw
DOALL 20"
WILSON 28" Vertical Woodworking band saw
GROB 36" band saw
WELDERS
MILLER (250P) Stick welder
AERCOLOGY’S WELDAIR (WA1000CP)
Smoke eater
THERMAL ARC (PAK 5Xr) Plasma cutter
MILLER (Coolmate 4) Water cooler
ARCWELD (G022263) 230/460/575
Smoke Eater, NEDERMAN
HOBART (300RVS) Mig Welder w/Feeder
LINCOLN (CV-300)
THERMALARC (250 Tigwave)
CANOX Arc Welder
L-TEC Heliarc 250hf plus squarewave
MILLER (Big 50) Diesel welder, 400 amp
MILLER (D302) 3+12 Diesel welder
MEMCO (Stick AC-225) single phase
MISCELLANEOUS
Assorted Transformers
Hydraulic Pump
Industrial Fan, VARY 4’ x 4’
MITUTOYO height gauges, assorted sizes
Wet Soda Blaster 38 x 41 x 38
Assorted Rotary Tables
Finger Brake, CHICAGO 5’
Mag. Lathe Chuck, ECLIPSE
Assorted Demagnetisers
HILTI (DXA40 driver) w/ XHN date stamp
attachment
Bead Rolling Machine, CMZ7, 114v, single ph.
Pressure Washer, PSC 600v, 3ph
Assorted Measuring Tools
Belt Sander, BROOK HANSEN 6"x 80"
Pipe Vise Stands, (2) PILOT (No.20)
Angle Plates
Torque Wrench, PROTO 600 ft/lbs
Collet sets
Assorted vises
Assorted Chain Hoists
Threading Caddy, RIGID
Magnets, 800-1000kg
Hardness Testers
Pedestal Buffer, CINCINATTI 14"
JET & CM 10T chain falls, 20’ lift
Bore Gauge, SUNNEN (Dial)
Tri Vise, RIGID
RIGID Tooling for threading machine
Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5
www.paulmachinery.com
Page 14 Clue September, 2015
SYLVAIN TREMBLAY MACHINERY
Milling, EAST-LION, with C-TEC Ctrl, 12”x 60”, CNC 3 AXIS, $9,500
TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO
Hyd. shear ELITE 1/4'' X 10',Mot. back gauge, secured, 2008
Kone 50TM (2 x 25TM) X 45', Mint Condition
CLEARANCE SALE, MUST BE SOLD
Hyd. plate roll DAVI, 3/16” X 10', 2002 Roto-Die 10', model 10,mint condition
Hyd. press brake ELITE, 175T X 13', CNC back gauge, tooling, secured, 2008
Lift truck KALMAR, P100BX,8900 Lbs, 174'', side shift
Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]
ALL MACHINES
REVISED DOWN
MODERN TOOL BC LTD.
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
DURMA AD-R37175 CNC Hydraulic Press Brake
HYD-MECH S-20A IIIAutomatic Band-Saw
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC
Service & Parts Sales | Toll-Free: 1-800-717-1440
SCOTCHMAN 6509-24MHydraulic Ironworker
DURMA PBH-180Profile Bending Machine
Clue September, 2015 Page 15
B1804 BENDERS, HYDRAULIC
5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
B6985 BRAKES, HAND
16ga X 10’ BROWN & BOGGS, , $3,000, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 3
B7000 BRAKES, PRESS
15 Ton x 4’ CHICAGO, , Mechanical, $1,900, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 3
20 Ton x 4’ ALLSTEEL, , Hydraulic, $5,500, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 3
35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op.
Manual Gauge, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical, Hurco
5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,
Crowning, Laser safety, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
55 Ton AMADA, RG 50 (1996), NC 9EXII, Ref# 10300, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
55 Ton x 82.1" AMADA, RG5020LD (2004), Up-Acting w/LD
2-Axis CNC control, Ref# 10293, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
70 Ton x 10’ ALLSTEEL, , CNC, Automec, Light curtains, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,
Ref# 10286, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
88 Ton AMADA, HDS8025NT (2008), Ref# 10244, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW in
2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis
touch screen, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
93.5 Ton x 87" TRUMPF, Trubend 5085 (2011), 6-Axis, Like New,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#
10322, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,
Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
99 Ton DURMA, AD-E 3090 (2007), Delem DA-51 2-Axis, Ref#
10184, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
110 Ton AMADA, FBDIII 1030NT (2000), 122", Ref# 10112,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
110 Ton AMADA, HFE 1003S/7 (2000), CNC, 122", Ref# 10144,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic
bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon
2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
110 Ton x 10’ HACO, PPM 30100, CNC, 2-Axis ATL500, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,
CNC Crown, DNC angel prog., (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System
5000, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
120 Ton x 12’ ALLSTEEL, , Hurco CNC, $18,000, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 3
130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC, 165",
Ref# 10214, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
138 Ton AMADA, FBD1253NT (2002), Up-Acting CNC, Ref#
9978, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7 Axis
touch screen, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
143 Ton AMADA, HFE 1303 (2005), Operateur II, Ref# 10324,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
143 Ton AMADA, HDS-1303NT (2005), AMNC-PC 8-Axis, Ref#
10245, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid
CNC, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke
Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
148 Ton x 10’ BYSTRONIC, 3100 x 130, 6 axes back gauge,
Hyd clamping, with tooling, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
150 Ton x 10’ “NEW” FERRIC, Speed Bend 3100x135, XRZ1Z2
back gaug, CNC crown, 2-3D prog. off line software, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
160 Ton x 13.5’ NISSHINBO, 4100 x 150, XRZ1Z2, CNC crown,
2D graphic control, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
165 Ton x 12’ HACO, ERM 36150, X-39’, Man Crown, BC55 2D
graphic, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
170 Ton x 12’ VERSON, , Mechanical, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 3
PAGE 16 CLUE, August, 2015
CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222
CNC MACHINES • FABRICATING EQUIPMENT • PRINTING PRESSES, BINDERY EQUIPMENT • CONSTRUCTION EQUIPMENT • BAKERY EQUIPMENT • NUT &
BOLT MACHINERY • KNITTING MILLS • CONFECTIONARY & FOOD EQUIPMENT • RUBBER MILLS • CHEMICAL & PAINT MIXING EQUIPMENT • CAN MAKING
MACHINERY • PHARMACEUTICAL MACHINERY • WIRE MACHINERY • AUTOMOTIVE PRODUCTION MACHINERY • ANY LARGE QUANTITY OF STEEL
INVENTORIES, ETC.
Please state price, location & conditionWe will purchase single machines
or complete plants
SEND YOUR INFORMATION TO: NORM JACOBSTEL: 416-736-1367 or FAX: 416-736-4159EMAIL: [email protected]
TCL Asset Group Inc.
WE CAN USE YOUR SURPLUS EQUIPMENT
Page 16 Clue September, 2015
CLUE, April 2014 PAGE 17
B7000 BRAKES, PRESS L0850 LASERS
175 Ton x 12’ ACCURPRESS, (1997), 2-Axis CNC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),
ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
175 Ton x 12’ “NEW” TOSKAR, , CNC 4-axis Touch graphic
Manual crown tooling, quick release clamping, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 3
187 Ton AMADA, HFE-1704S/7 (2004), Operateur 7-Axis CNC,
Ref# 10166, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2, Crowning,
Clamping, Ref# 10013, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
193 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
242 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x220, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
245 Ton x 14’ HACO, ERM 42225, X back gauge Man Crown,
BC40 Angle prog., (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69 6-axis,
Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69
6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
350 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x350, XR
Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
40-400 Ton x 5-16’ “NEW” TOSKAR, , Hydraulic, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 3
400 Ton x 17’ CINCINNATI, , Mechanical, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 3
600 Ton x 16’ ALLSTEEL, , Hydraulic, $27,000, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 3
1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec 8805,
Ref# 10242, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
D5700 DRILLS, RADIAL
3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
64" x 5MT TOS, VR5, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric, Gas,
Oil, Propane, for all purposes, (Park Thermal International
Tel: 905-877-5254, Fax: 905-877-6205)
G8025 GRINDERS, SURFACE, RECIPROC
8"x 18" FREJOTH, , Automatic, Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
8"x 20" JONES & SHIPMAN, , $1,900, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 3
8"x 24" ENCO, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
8"x 24" TOS, BRH20, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
G9030 GRINDERS, MISCELLANEOUS
10"x 25" TOS, BU28-630, Cylindrical, (Powermaster Machinery
Ltd Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
H6004 HONES
SUNNEN, , MBC-1804M & MBC-1802MR, Power Stroke, Horiz.,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
SUNNEN, MBB-1660K, Manual, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
I6200 IRONWORKERS
50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
75 Ton KINGSLAND, 75XS, Dual operator, 5 stations, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
80 Ton “NEW” FERRIC, HIW 80 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
100 Ton “NEW” FERRIC, HIW 100 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
125 Ton “NEW” FERRIC, HIW 125 DC, Dual operator, 5 stations,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
55 Ton to 120 Ton “NEW” DURMA, , (Machine Solutions Inc.
Tel: 416-220-5910 See Page 3
100 Ton OMERA, , Mechanical, $3,900, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 3
L0850 LASERS
WUHAN, Golden Laser, New 2012, 650 Watts Yag lamp laser,
Gantry design, Never used, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 17
1500 Watt AMADA, LC1212XL (1995), 4’ x 8’, Rebuilt 2012, Ref#
10251, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
2000 Watt AMADA, Pulsar LC2415XLA3 (2000), 61"x 198"
w/REPO, Ref# 10305, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000 hours,
New turbo blower, Ref# 10175, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
Priced to Move
Installed New 2013, only 250 working hours. (Shop Closed) • Like New Condition • 650 Watts Yag Lamp Pump Laser • Complete software for Flat sheet and Tube • Auto sensing cutting head • Gantry desing •
with fixed beam path • Exaust fan, Scrap parts • conveyor • 17’’ LCD Display / 5’’ LCD Display/ Move
Handle • 128 M, memory / USB / Ethernet / Soft Dog Key
Paid new : 105K, Low Price at : $49,500.00
Contact: Gilles LupienEmail: [email protected]: 819-478-5266
Cell: 819-473-2902
Website: www.machinerygl.com
4 Axis, Dual Chuck, Dual Turret Turning Center Model : LFS15-2SP
Year 1999 Only 7,875 Hr. Cutting time.Control : OSP U100L
Chuck Size : 8’’, Spindle Nose :ASA, A2-615HP.
4,500 RPM.
Low Price at : $54,500.00
(Only 12,781 Hr. Cutting Time.)Model : MX-45 VAE
Control : OSP 7000M (4 Axis)12,000 rpm
Table : 40’’X20’’XYZ : 30’’X19’’X18’’
Inc : Coolant trough, Chiller, Chip Conv.,Full enclosed guards, Lock doors device.
Low Price at : $37,500.00
Wuhan Golden Laser Okuma Robusturn Twin Spindle Okuma VMC, Pallet Changer
Clue September, 2015 Page 17
L0850 LASERS L6135 LATHES, N/C & CNC
PAGE 18 CLUE, April 2014
2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref# 10255,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#
9955, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
2KW TRUMPF, L2030 (2007), 4’x 10’, Low hours, Ref# 10237,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
3000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483 Beam
on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:
2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L, Ref#
10287, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
4000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
4000 Watt AMADA, Gemini F0-3015NT (2006), 61"x 122.8",
Approx. 25,900 hrs, Ref# 10301, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, FOM2 3015NT (2012), w/ Automatic nozzle
changer, 23,300 hrs, Ref# 10297, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, Gemini F0-3015NT (2007), CNC
w/Automatic Nozzle Changer, Ref# 10298, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
4000 Watt AMADA, FOM2 3015NT (2011), w/Automatic nozzle
changer, approx. 31,500hrs, Ref# 10299, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
4000 Watt AMADA, LC3015F1NT (2009), 5’x 10’, AMS-3015 10
Shelf Load/Unload System, Ref# 10187, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
4000 Watt AMADA, Gemini FO-3015NT (2007), 5’x 10’, Approx.
40,000hrs, Ref# 10249, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, Theta (2008), 5-AXIS, LC3015CII, No rotary
chk, Ref# 10248, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual
Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual
Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,
Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#
10123, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary Index,
Ref# 10229, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
5000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 24
5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
5000 Watt TRUMPF, Trulaser L3030 (2012), 5’x 10’, 10000
Laser On & 6000 Beam On, Ref# 10278, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 8
5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#
10072, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#
10114, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
L2150 LATHES, CNC
OKUMA ROBUSTURN, LFS15-2SP (1999), Twin Spindle, 4-axis,
Dual chk, Dual Turret turning center, $54,500, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
See Page 17
L3000 LATHES, ENGINE
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3
& 4 jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
14"x 40" TOS, SN32, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
16"x 40" TOS, SN40C, DRO, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
17"x 60" COLCHESTER, Mascot, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
18"x 80" DARBERT, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
22"x 60" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
22"x 80" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
SHENYANG, CW 6263B, 26" swing x 120" centers, Mint cond.,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 17
26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
L6135 LATHES, N/C & CNC
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2"
Bar cap, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
1-589 Middle�eld Rd, Toronto ON M1V 4Y6Phone: 416-291-9499 Fax: 416-291-4990Email: [email protected]: www.compumachine.ca
Toshiba BTD 9R CNC Boring Mill with Rotary table
Great capacity low price20hp, Vert Travel Of Headstock, Y-39.4",X-48", Spindle Travel, W-20" SaddleTravel Z-35.4", Built-In Pwr Rotary Table35.4" x 41.3", Capacity 5,510.lb
Toshiba BTD 11B P4 CNC Boring Mill Plain Table
Big Capacity 98" table low priceX-98”, Y-59”, Z-62”, W-24”, Table size 98”x 59”, Table load Capacity 17,000lb, Spindle diameter 4.3”, Spindle speeds 1600rpm, Spindle motor 20/30hp
Toshiba TMC 13-3 CNC, VBM w/Live spindle and C axis
Table Diameter: 49.2", Max Swing: 63", Max. Turning Dia: 63", Max Turning Height: 49.2", Max Table load – turning – (milling) 22,000 LBS (15,000LBS), Table RPM 3~250, Table Motor 40/50 HP, Cross Rail Stroke (4) positions 19.7”- 49.2”. ATC 24 Live spindle:, 20 HP (1,500 RPM)New Fanuc 0i-TD CNC Control with warranty.TOSHIBA SALE
CNC Machining Centers2001 Deckel Maho Gildemeister (DMG) DMU-70 Evolution 5-Axis
VMC with Heidenhain TNC 430 Control1990 Mazak VQC 15/40 with Mazatrol M32, Table 16” X 35”, X-22”,
Y-16.1”, Z-15”, 6000rpm2000 Daewoo Mynx 500 Fanuc 21-M Control, Table size 49”x20”
X-40”, Y-20”, Z-20” 6000rpm ATC 241992 Hermle UWF 851 H CNC Univ Milling Mach, Heidenhain 415
CNC Control, X-600mm Y-450mm Z-400mm, 20-4500rpm1993 Enshu 500H CNC Horiz Mach Center Fanuc 16-M Ctrl, Two
Pallet auto changer 20” pallets, X-28” Y-25.6” Z-23.6”, 20-6000rpmCNC Lathes1981 VDF Boehringer 800 3m centers Fanuc 6T Control1981 VDF Boehringer 820 3m centers Fanuc 6T Control1983 VDF Boehringer 800 3m centers Fanuc 0T ControlCNC Boring Mills1996 Toshiba BTD 110 R16 2m x axis, 1500mm Y axis. Rotary
table 55”x63”, ATC 38 Tosnuc 888 ControlBoring Mills2001 Tos W100A Horizontal with Heidenhain 3 axis DRO
Union Floor Type Horizontal, BFP 125 Accurite 3 axis DRO Spindle Diameter 5”, 12 Ton Rotary table and floor platesEngine lathesMerli Clover 24” swing, 80” centersGiana Torgim. 32” swing, 140” centers 15” chuckChien Yeh 14” swing 60” centers 8” chuckMilling machines Dah- Lih: DL-VHRU-G2, 10” x 48” table, 40 taper (vert. & horiz.),
133-2160 rpm (belt)- vert., 50- 750 rpm (belt)- horiz.. c/w x- axis power feedPresses60 Ton Hydraulic H frame pressFork liftsElectric Lift- Truck: Clark; E-C 500, 5000 lb. capacity, 188” lift. c/w battery charger.GrindersKarstens CNC Universal Cylindrical Grinder, 12” magnetic chuck,
24” swing, 60” centers, Universal Swivel grinding wheel, George Karstens CNC Control
Page 18 Clue September, 2015
L6135 LATHES, N/C & CNC P2135 PLASMA CUTTING MACHINES
HAAS, SL20T (2005), (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MORI SEIKI, SL150S (1997), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&YAxis
Milling, 10"Chk, Live holders, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live
holders, C&Y Mill cap, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed
20", Mint cond., (Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266) See Page 17
22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens 840D,
16" Chk., (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens
840D, 16” Chk., (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0130 MACHINING CTRS, HORZ
OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
M0185 MACHINING CTRS, VERT
HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta
CNC Control, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
OKUMA, MX-45 VAE, X-30" Y-19" Z-18", Table 40"x 20", Pallet
changer, 4-axis, $37,500, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 17
TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9", Ref#
9854, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5
CNC, 13,000 rpm, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5",
Fanuc O-MC, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0850 MEASURING MACHINES
SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
M1550 MILLS, CNC
MIKRON, WF31C, Fanuc OM, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
SUPERMAX, , Knee type Centroid CNC, (Powermaster
Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)
See Page 23
JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
M1659 MILLS, UNIVERSAL
10"x 50" TECHLEADER, , 5hp, 2 axis read-out, powerfeed, $5,
500, (Machine Solutions Inc. Tel: 416-220-5910 See Page 3
10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
M2824 MILLS, VERTICAL
14"x 49" TOS, FGV32 (1997), (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
N5230 NOTCHING MACHINES
(NEW) BOSCHERT, , 5/32" x 8-7/8" x 8-7/8", Hydraulic, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
1/4"x 8.6"x 8.6" EUROMAC, , Hyd. Notcher w/Bending
Attachment, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
O7397 OVENS
New & Reconditioned , Powered by Electric, Gas, Oil, Propane,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P2135 PLASMA CUTTING MACHINES
100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC
plasma, Metalmaster II, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
CLUE, April 2014 PAGE 19
British Columbia
Modern Tool (BC) Ltd, Port Coquitlam (Pam).......................................... 604-472-1444............604-472-1455............15
Manitoba
Empire Machinery & Tools, Winnipeg (Rick) ........................................... 800-665-8089............204-779-7796..............9
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ...................................... 519-485-7089............519-485-7368............16
Compumachine Canada, Toronto (Peter)................................................ 416-291-9499............416-291-4990............18
DiPaolo Machine Tools Ltd., Mississauga (Nelson).................................905-676-9265............905-676-9436............10
Fabtec Machine Tool Solutions Inc, Oakville (Raj) ..................................905-469-1586............905-469-3054............13
Ferric Machinery Inc, Mississauga (Koen) .............................................. 877-337-7424............905-820-3234............24
Havlik Int’l Machinery, Cambridge (John)................................................ 519-624-6240............519-624-4119............22
Hilco Asset Sales Canada, Toronto (Bruce) ............................................ 416-252-1955............416-251-1955............20
Infinity Assets Solutions, Concord (Leslie) .............................................. 905-669-8893............905-669-7512..............7
L S Walker Machine Tools Inc, Milton (Chris) .......................................... 905-876-0890............905-876-1959............14
Machine Solutions Inc., Guelph (Andrew) ............................................... 416-220-5910................................................ 3
Park Thermal International, Georgetown (Sales) ....................................905-877-5254............905-877-6205............19
Paul Machinery, Burlington (Paul) ........................................................... 905-634-8442............905-681-6940............14
Powermaster Machinery Ltd, Mississauga (Peter) ..................................905-624-9327............905-624-8591............23
S K Braly Machinery Inc, Mississauga (Steve)........................................ 905-793-8080............905-793-2190............21
SMTCL Canada Inc., Oakville (Merry) .................................................... 905-829-1579............905-829-8692............12
Stevens Machinery Sales (2005) Inc, Toronto (Andrew) .........................416-798-3611............416-798-8439..............2
TCL Asset Group Inc, Toronto (Norm)..................................................... 416-736-1367............416-736-4159............13
TOS Trade Canada Inc., Milton (Marian) ................................................ 905-878-0888............905-878-9022..............1
Trader Machinery Inc, Concord (Jonathan)............................................. 905-669-7507............905-669-7512..............4
Quebec
Machinerie Gilles Lupien, Drummondville (Gilles)...................................819-478-5266............819-478-5266............17
Machinery S. Tremblay, Drummondville (Sylvain) ...................................819-477-6677............819-477-6466............15
Seguin Machinery Ltd, Vaudreuil-Dorion (Gerry).....................................514-935-3531............514-932-4459..............6
Stock Machine Tools Co. Ltd., Laval (Andre) .......................................... 450-232-0444.............................................. 16
USA
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan).........................845-398-0073............845-398-0074..............8
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORYOvensFor Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Numerous Sizes Available
Call: 905-702-4644
Clue September, 2015 Page 19
P6100 PRESSES, OBI
60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x
36"bed, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable Stroke
Length, Command stamp ctls, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch w/air
assist, (Brighton Machinery Sales Inc Tel: 519-485-7089,
Fax: 519-485-7368)
P7100 PRESSES, STRAIGHT SIDE
800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,
20-40spm, Like New!, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9150 PUNCHES, SINGLE STATION
25 Ton PIERCE-ALL, , (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
60 Ton FABMASTER, (2011), Like new, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9275 PUNCHES, TURRET
19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#
9812, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,
Ref# 9851, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
20 Ton TRUMPF, TC2020R Rotation (2001), 19 Sta. Rotation,
50"x 100", Ref# 10267, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,
Ref# 10304, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton TRUMPF, TC2020R Bosch (2011), 50"x 100", Approx.
3100hrs, Ref# 10321, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW
Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton FINN POWER, F5-20 (2000), 60"x 80", 20 Station, Thick
Style, Ref# 10266, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton TRUMPF, TC2020R (2011), 50"x 100", Like New, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,
Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31 Sta., 3A/I,
Ref# 10124, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
22 Ton AMADA, EM2510NT (2004), AMNC NT CNC, 50"x 100",
Servo driven, Ref# 10220, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,
Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
25 Ton TRUMPF, TC5000R-1600 (2005), New linear amplifier,
14,039hrs, Ref# 10159, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Pega 345Q (1993), Fanuc O4PC, 58 Sta., 2 A/I,
Ref# 10283, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &
PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Pega 357 (1985), Fanuc 6M, 58 Sta, 2 A/I, Ref#
10007, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4A/I, Ref#
10250, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf Loader,
Unload Conveyor, Ref# 10269, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton NISSHINBO, HIQ1250PAL-510T (2000), 37 Station Thick
Turret, 3 A/I, Ref# 10212, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton MURATEC WIEDEMANN, 3046A (2000), Fanuc 18-iP,
Ref# 9690, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Apelio III 357V (1998), Fanuc 16L CNC Ctrl,
1500 Watt Laser, Ref# 10274, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Vipros 368 King II (2000), Fanuc 18P, CNC
control, Ref# 10173, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
33 Ton AMADA, Pega 345Q (1993), Fanuc 04PC, 58 Sta, 2 A/I,
Ref# 10157, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 8
R4704 ROLLS, ANGLE BENDING
2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,
Hydraulic, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P6100 PRESSES, OBI R4704 ROLLS, ANGLE BENDING
PAGE 22 CLUE, August, 2015
ONLINE &TIMED AUCTION
SST TECHNOLOGIESA Division of Magna Powertrain Inc.
Late Model CNC Vertical Machining Centres • (2) 2011 Mazak Variaxis 630 5XII 5-Axis • (8) 2011 DMG DMC 635V ERGO LINE • 2007 Doosan Puma V400 • Large Quantity Cat 40 tooling • Mazak Palletech FMS (35) Pallet Transfer System • 2007 Mazak Variaxis 630 5XII 5-Axis • 2010 DMG DMC 635V ERGO LINE • Misc. Support & Tooling • Complete Mazak Variaxis System to be offered as a Complete Cell & Piecemeal • PARTIAL LISTING ONLY •
416.252.1955 • www.hilcoind.com
For more information, please contact Cassidy Baker at416.252.1955 or [email protected]
See our Website for Auction info & detailed Catalogue Listings & Photos
Sale Starts: Monday, Sept. 21 • 10 AM ESTBID NOW!
Ends: Thursday, Sept. 24 • 1 PM EST
Preview Date: Monday, Sept. 21 • 9 AM - 5 PMOr, by prior Appointment
Sale Location: 600 Tesma Way, Concord, ON
Page 20 Clue September, 2015
CLUE, May 2010 PAGE 21
R4704 ROLLS, ANGLE BENDING Z9000 MISCELLANEOUS
2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK60, Mod. Rolls, DRO,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.
Side guides, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital
Readout, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
R5603 ROLLS, PLATE BENDING
1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending
roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending
roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending
roll, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
5/16"x 8’ “NEW” FERRIC, , AHS plate roll, 4 roll machine, DRO,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 24
NANTONG, WIIJ-10, Max. Cap 3/8" x 6’, New 2012, Never used,
Roll speed 4m/min, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266) See Page 17
S0653 SAWS, BAND, HORIZONTAL
10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz,
PLC Control, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
S0690 SAWS, BAND, VERTICAL
24" STARTRITE, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
S0805 SAWS, COLD & FRICTION
SOCO, MC350A (2001), (Machine Solutions Inc.
Tel: 416-220-5910 See Page 3
S0948 SAWS, MISCELLANEOUS
4"x 10" ELUMATEC, , Fully Automatic Circular Saw, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
See Page 17
S4105 SHEARS, POWER SQUARING
10ga x 48" TECHNOIMPEX, 1048 (1990), mechanical in
excellent working condition, $3,700, (Stock Machine Tools Co.
Ltd. Tel: 450-232-0444
1/4"x 10’ HACO, HSLX 3006, Mot. CNC back gauge, auto
gap-angle, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1/4"x 10’ PEARSON, , Hydraulic, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 3
1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back gauge,
Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
1/4"x 10’ HACO, (2007), CNC with 39" back gauge, $19,500,
(Machine Solutions Inc. Tel: 416-220-5910 See Page 3
1/4"x 12’ WYSONG, , Mechanical, CNC gauging, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 3
1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back
gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 24
1/2"x 12’ ALLSTEEL, , Motorized BG adjustable rake and gap,
(Machine Solutions Inc. Tel: 416-220-5910 See Page 3
1/4"-1" x 8’-20’ “NEW” TOSKAR, , Hydraulic, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 3
W3054 WELDERS, SPOT
20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
Z9000 MISCELLANEOUS
Transformers 5 KVA to 1000 KVA, Large Assortment of used,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Barfeeds LNS, Servo S3 (2007), w/Remote pendant, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
LYNDEY, Tool Presetter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
WAHLI, , Tool Presetter, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 23
8 Ton PEMSERTER, Series 2000 (2002), PLC control, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS
PAGE 22 CLUE, April 2012
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month
DEADLINE
The deadline for advertising is the dayfollowing the last Wednesday of the month
ADDRESS
343 Smith AveBurlington, ON, L7R 2T9
Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.com
e-mail: [email protected]
MUST SELL
Cincinnati 10ga x 10'
Power Squaring Shear
Bliss #21
Punch Press
Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228
Website: www.managingyourassets.com
Alberta
B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15
British Columbia
ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17
Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15
Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21
Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22
Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27
Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10
Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18
Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3
Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26
Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13
Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15
Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1
Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15
Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15
Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15
Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5
S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23
Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4
Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15
TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28
Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15
Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17
Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23
Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15
Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25
Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15
USA
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8
S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25
Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]
W W W . S K B R A L Y . C O M
CLUE, July 2010 Page 3
AIR COMPRESSORS
GARDNER DENVER, Eberda, 15hp compressor
DRILLS
SAALFELD, BS50 Pillar drill, 2" capacity
FACING & CENTERING
SENECA FALLS, EW75
GRINDERS, SURFACE, RECIPROC
CHEVALIER, FSG-618M, 6"x 18" ManualOKAMOTO, ACC-618, 6"x 18" HydarulicNICCO, NFG-515HD, 6"x 20" Form grinderTOS, BRH20-02, 12"x 24" Hydraulic surface grinderBROWNE & SHARPE, 12"x 24"STUDER, S36, 13"x 40" CNC, CylindricalBLANCHARD, 16" Vertical surface grinder
KEYSEATERS
MORRISON Keyseater
LATHES, CNC
DAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisNAKAMURA TOME, TMC-15NAKAMURA TOME, SL-JR
LATHES, ENGINE
NAMSEON, 17"x 55"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 60"CHIEN YEH, CY560, 22"x 80"TOS, SN63/2000, 24"x 80"MORANDO, 24"x 120"PBR, TM-300, 24"x 196"
MACHINING CTRS, HORZ
ENSHU, JE30S, HorizontalOKUMA, MA40-HA, 16", HorizontalMORI-SEIKI, NV-5000, Vertical
MILLS, UNIVERSAL
JAFO, FWD 25U, 10"x 50"
MILLS, VERTICAL
FIRST, LC, 9"x 42" 1-1/2TOPWELL, VK 4, 10"x 50"FIRST, LC20VH, 10"x 50" Vert/HorizKAO FONG, 12"x 50" Horz/Vert
SAWS
BAXTER, 260, 10", HorizontalSOCO, MC350 NFA Automatic cut-off saw, non-ferrous
SHEARS, POWER SQUARING
DIACRO, 24"x 16ga Hand shear with standAMADA, M-2560, 1/4"x 8’
WELDERS, SPOT
CANOX, CPMS-20FT 20 KVA
TOOLING
WAHLI, MXH 300/200 Tool setterLYNDEX, E348 Elba tool setter
MISCELLANEOUS
Centering & Facing Machine, SENECA FALLS, CS.LO. Swing
End Finishing Machine, SOCO, EF-PV/52
Parts cleaner, HOTSY, 7630
Parts cleaner, HOTSY, H20-2836
Thread Rolling Machine, SHENG JIAN, Z28-63
Tilting box table, 30"x 24"x 22"
Clue September, 2015 Page 21
Page 22 Clue September, 2015
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
“SPECIAL PRICES”HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
42” x 24” x 24” Fagor Control32” x 20” x 20”
28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
• Table size ranging from 2500 to 6000 mm • Machines large and heavy workpieces • High efficient machining • Rigid table bearing using hydro-static guiding principles • Precise table positioning (C-axis) and rotary tool drive with high power output • Siemens or Fanuc Control systems • Can be equipped to use high-pressure coolant
• High rigidity and stability • Functional design for easy maintenance • Short delivery time from manufacturer • Siemens or Fanuc control systems • Can be equipped with table positioning and rotary tool drive • Automatic exchange of turning tools and rotary tools • Ram designed for efficient and precise machining • Variable height of the working area • Possibility to perform high-pressure through tool coolant
High quality European built machines
Havlik Ad Sept 2015.indd 1 2015-08-27 10:20:08 PM
Clue September, 2015 Page 23
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
“SPECIAL PRICES”HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
42” x 24” x 24” Fagor Control32” x 20” x 20”
28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
M A C H I N E R Y
899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765
Fax: 905-917-0222
Page 24 Clue September, 2015
Your Production Matters To Us
PROFILE ROLLS
PLATE ROLLS
PRESS BRAKES
FIBER LASER
PUNCH PRESS
PLASMA MACHINE
SHEARS
We offer innovative solutions to increase your productivity
ONTARIO - EASTERN CANADA3980 Chadburn CrescentMississauga, ON L5L 3X4Tel: 905-820-3232Fax: 905-820-3234
WESTERN CANADAWestside Service Ltd4406-58 St. SouthLethbridge, AB T1K7E2Tel: 403-380-5047Fax: 403-380-5048
FLEXIBLE COIL PUNCHING LINES
Quality | Service | Value | www.ferricmachinery.com