Jorgenson Machine Tools 2895 South 300 West Salt Late City, UT 84115 Tel: 801-493-0151 Fax: 801-493-0157 Toll Free: 855-773-7727 Email: Sales@JorgensonMachineTools.com www.JorgensonMachineTools.com

CNC Lathe

mailto:sales@JorgensonCompanies.com

CNC Lathe 16 Bed 23 to 30 Swing 3 & 4 Bore

Attached hydraulic unit (opt.)

Boring device (opt.)

Hydraulic 3-jaw chuck (opt.)

Hydraulic 4-Way tool post (opt.)

Hydraulic Tailstock (opt.)

Hydraulic V8 turret (opt.)

Milling device with

hydraulic V8 turret (opt.)

Movable program (MPG) (opt.)

Rear chuck guard (opt.)

X axis servo motor with belt

Z axis servo motor with belt

Model mm (in) TNC-600 TNC-670 TNC-770 Swing over bed 600 (23) 670 (26) 770 (30)

Swing over cross slide 330 (13) 400 (15) 500 (19) Width of bed 400 (16)

Distance between centers 1500(60), 2000(80), 3000(120)

Spindle bore 80(for 3 b) / 104(for 4 b) Spindle nose A1-8, D1-8 / A2-11

Spindle speeds (4 Steps) 16-1500 rpm / 13-1200 rpm Ball screw diameter X-axis : 32 (1-1/4) , Z-axis : 50 (2)

Cutting speed X-axis : 0~5 m/min , Z-axis : 0~5 m/min Max x-axis travel 350 (13)

Max z-axis travel 1300(60), 1800(80), 2800(120) Tailstock spindle travel / Quill 230 (9) / 95 (3-3/4)

Tailstock spindle taper MT#5 Controller FAGOR 8055i FANUC 0i-TD FANUC 0i-MATE-D

Spindle motor 15KW X-axis servo motor FXM 32 FANUC 8 FANUC 8

X-axis servo motor output 1.5 KW 1.6 KW 1.2 KW Z-axis servo motor FKM 44 FANUC 12 FANUC 12

Z-axis servo motor output 2.3 KW 3.0 KW 1.8 KW Coolant pump motor 1/4 HP

Our design enhances output torque

CNC Lathe 16 Bed 23 to 30 Swing 3 & 4 Bore

FEATURES:

Extra rigid one piece Meehanite casting bed and heavily ribbed webbing. They provide

maximum stability for heavy duty cutting.

All slide ways are hardened and precision ground. They result in outstanding wear resistance

after long period of uses.

High quality gears are precision ground and carburization treated. They enhance the

durability and stability for heavy duty cutting.

Attached hydraulic system saves room and enhances convenience (optional).

A stainless steel shield protects Z-axis ball screws to prevent rusting and chip damage.

STANDARD ACCESSORRIES:

Main spindle motor with inverter

Auto lubrication system

Coolant system

2-door splash guard

RS-232 port

Work lamp

Adapter sleeve and Tool centers

Leveling bolts & pads

Tool box with oiler, spare fuse, paint & tools

Operation & service manual

OPTIONAL ACCESSORIES:

FANUC 0i-TD, 0i-MATE-D or FAGOR

8055i with 15KW AC Spindle Motor

3-Jaw chuck

4-Jaw chuck

Face plate

Hydraulic power chuck

Double chuck system

Steady rest

Follow rest

Hydraulic or electric milling device

Hydraulic spindle orientation

Boring device

Hydraulic 4-way tool post

Hydraulic V8 turret

Hydraulic tailstock

Customized sheet metal guarding

Chip conveyor

SPECIFICATIONS:

www.JMTUSA.com / www. JorgensonMachineTools.com

CNC Lathe 18 Bed 26 to 33 Swing 4 to 9 Bore

Attached hydraulic unit (opt.)

Boring device (opt.)

Hydraulic 3-jaw chuck (opt.)

Hydraulic 4-Way tool post (opt.)

Hydraulic Tailstock (opt.)

Hydraulic V8 turret (opt.)

Milling device with

hydraulic V8 turret (opt.)

Movable program (MPG) (opt.)

Rear chuck guard (opt.)

X axis servo motor with belt

Z axis servo motor with belt

Model mm (in) TNC-670W TNC-770W TNC-840W Swing over bed 670 (26) 770 (30) 840 (33)

Swing over cross slide 380 (15) 480 (18) 550 (21) Width of bed 460 (18)

Distance between centers 1500 (60), 2000 (80), 3000 (120),4000 (160), 5000 (200)

Spindle bore 104 (4), 156 (6), 230 (9) Spindle nose A2-11, A2-15

Spindle speeds (4 Steps) 13-1200, 11-800, 4-600 Ball screw diameter X-axis : 32 (1-1/3) , Z-axis : 50 (2)

Cutting speed X-axis : 0~5 m/min , Z-axis : 0~5 m/min Max x-axis travel 410 (16)

Max z-axis travel 1300 mm (60), 1800mm (80), 2800mm (120),3800mm (160), 4800mm (200) Tailstock spindle travel / Quill 230 (9) / 95 (3-3/4)

Tailstock spindle taper MT#5 Controller FAGOR 8055i FANUC 0i-TD FANUC 0i-MATE-D

Spindle motor 15KW X-axis servo motor FXM 32 FANUC 8 FANUC 8

X-axis servo motor output 1.5 KW 1.6 KW 1.2 KW Z-axis servo motor FKM 44 FANUC 12 FANUC 12

Z-axis servo motor output 2.3 KW 3.0 KW 1.8 KW Coolant pump motor 1/4 HP

Our design enhances output torque

CNC Lathe 18 Bed 26 to 33 Swing 4 to 9 Bore

SPECIFICATIONS:

FEATURES:

Extra rigid one piece Meehanite casting bed and heavily ribbed webbing. They provide

maximum stability for heavy duty cutting.

All slide ways are hardened and precision ground. They result in outstanding wear resistance

after long period of uses.

High quality gears are precision ground and carburization treated. They enhance the

durability and stability for heavy duty cutting.

Attached hydraulic system saves room and enhances convenience (optional).

A stainless steel shield protects Z-axis ball screws to prevent rusting and chip damage.

STANDARD ACCESSORRIES:

Main spindle motor with inverter

Auto lubrication system

Coolant system

2-door splash guard

RS-232 port

Work lamp

Adapter sleeve and Tool centers

Leveling bolts & pads

Tool box with oiler, spare fuse, paint & tools

Operation & service manual

OPTIONAL ACCESSORIES:

FANUC 0i-TD, 0i-MATE-D or FAGOR

8055i with 15KW AC Spindle Motor

3-Jaw chuck

4-Jaw chuck

Face plate

Hydraulic power chuck

Double chuck system

Steady rest

Follow rest

Hydraulic or electric milling device

Hydraulic spindle orientation

Boring device

Hydraulic 4-way tool post

Hydraulic V8 turret

Hydraulic tailstock

Customized sheet metal guarding

Chip conveyor

www.JMTUSA.com / www. JorgensonMachineTools.com

CNC Lathe 22 Bed 37 & 41 Swing 6 to 14 Bore

Boring device (opt.) Double chuck (opt.) HD Steady rest (opt.) Hydraulic 3-jaw chuck (opt.) Hydraulic 4-way

toolpost (opt.) Hydraulic Tailstock (opt.)

Hydraulic spindle

locating (opt.)

Hydraulic V8 turret (opt.)

Milling Device (opt.) MPG Rotary Tailstock Quill (opt.) Z axis servo motor with

planetary gear box

X axis servo motor

with belt Square groove (opt.)

Model mm (in) EVC-960 EVC-1060 Swing over bed 960 (37) 1060 (41)

Swing over cross slide 530 (38) 630 (42) Bed width 560 (22)

Distance between centers 1500~6000 (60~240) Spindle bore 156 (6), 230 (9), 260 (10), 310 (12), 360 (14)

Spindle nose A2-11, A2-15, A2-15, A2-20, A2-20 Spindle speeds (4 Steps) 6-800, 4-600, 4-600, 3-400, 3-400 rpm

Spindle motor 22KW (BC 1.5~5M) / 30KW (BC 6M) Ball screw diameter X-axis: 40 , Z-axis: 63 (BC 1.5~5M) / 80 (BC 6M)

Cutting speed X-axis : 0~5 m/min , Z-axis : 0~5 m/min Max, x-axis travel 600 (23)

Max, z-axis travel 1250~5750 (60~240)

Tailstock spindle travel/Quill

300 (11) / 125 (5)

Tailstock spindle taper MT#6

Controller FAGOR 8055i FANUC 0i-TD

X-axis servo motor FXM 54 12i Servo motor output 2.8 KW 3.0 KW Z-axis servo motor FXM 74 22i Servo motor output 5.3 KW 4.0 KW Coolant pump motor 1HP Our design enhances output torque

CNC Lathe 22 Bed 37 & 41 Swing 6 to 14 Bore

FEATURES:

Extra rigid one piece Meehanite casting bed and heavily ribbed webbing. They provide

maximum stability for heavy duty cutting.

All slide ways are hardened and precision ground. They result in outstanding wear resistance

after long period of uses.

High quality gears are precision ground and carburization treated. They enhance the

durability and stability for heavy duty cutting.

Timken bearings from the USA

STANDARD ACCESSORIES: CNC controller: FANUC 0i-TD or FAGOR

8055i

AC spindle motor

Auto lubrication system

Coolant system

Spindle Oil Cooler

2-door Type Splash guard

RS-232 port

Work lamp

Adapter sleeve (for 9 spindle bore lathe

and below)

Tool centers

Chip conveyor

Leveling bolts & pads

Tool box with oiler, spare fuse, paint & tools

Operation & service manual

OPTIONAL ACCESSORIES: 3-Jaw Chuck

4-Jaw Chuck

Face Plate

Hydraulic Chuck

Double Chuck System

Steady Rest

Follow Rest

Hydraulic or Electric Milling Device

Locating Hydraulically

Boring Device

Hydraulic 4-way Tool Post

Hydraulic V8 Turret

Hydraulic V12 Turret (for EVC-1200 and

above)

Hydraulic Tailstock

C-axis Control

Power Turret

www.JMTUSA.com / www. JorgensonMachineTools.com

SPECIFICATIONS:

CNC Lathe 32 Bed 47 & 80 Swing 9 to 21 Bore

Boring device (opt.) Double chuck (opt.) HD Steady rest (opt.) Hydraulic 3-jaw chuck (opt.) Hydraulic 4-way

toolpost (opt.) Hydraulic Tailstock (opt.)

Hydraulic spindle

locating (opt.)

Hydraulic V8 turret (opt.)

Milling Device (opt.) MPG (opt.) Rotary Tailstock Quill (opt.) Z axis servo motor with

planetary gear box

X axis servo motor

with belt Square groove (opt.)

Model mm (in) TNC-1200 TNC-1400 TNC-1600 TNC-2000H

Swing over bed 1200 (47) 1400 (55) 1600 (63) 2000 (80)

Swing over cross slide 740 (29) 940 (37) 1140 (44) 1535 (60)

Bed width 800 (32)

Distance between centers 2000~10000 (80~400)

Spindle bore 230 (9), 260 (10), 310 (12), 360 (14), 535 (21)

Spindle nose A2-15, A2-15, A2-20, A2-20, A2-28

Spindle speeds (4 Steps) 4-600, 4-600, 3-400, 3-400, 2-300 rpm

Spindle motor 30KW (BC 2~5M) / 37KW (BC 6~10M)

Ball screw diameter X-axis : 50 (2) , Z-axis : 80 (3)

Cutting speed X-axis : 0~5 m/min , Z-axis : 0~5 m/min

Max, x-axis travel 800 (31)

Max, z-axis travel 1750~9750 (80~400)

Tailstock spindle travel/Quill 300 (11) / 200 (8) (Std.) or 290 (11) Rotary Quill (Opt.)

Tailstock spindle taper MT#7

Controller FAGOR 8055i FANUC 0i-TD

X-axis servo motor FXM 74 22i

Servo motor output 5.3 KW 4.0 KW

Z-axis servo motor FXM 74 22i

Servo motor output 5.3 KW 4.0 KW

Coolant pump motor 1HP

Our design enhances output torque

CNC Lathe 32 Bed 47 & 80 Swing 9 to 21 Bore

FEATURES:

Extra rigid one piece Meehanite casting bed and heavily ribbed webbing. They provide

maximum stability for heavy duty cutting.

All slide ways are hardened and precision ground. They result in outstanding wear resistance

after long period of uses.

High quality gears are precision ground and carburization treated. They enhance the

durability and stability for heavy duty cutting.

Timken bearings from the USA

STANDARD ACCESSORIES: CNC controller: FANUC 0i-TD or FAGOR

8055i

AC spindle motor

Auto lubrication system

Coolant system

Spindle Oil Cooler

2-door Type Splash guard

RS-232 port

Work lamp

Adapter sleeve (for 9 spindle bore lathe

and below)

Tool centers

Chip conveyor

Leveling bolts & pads

Tool box with oiler, spare fuse, paint & tools

Operation & service manual

OPTIONAL ACCESSORIES: 3-Jaw Chuck

4-Jaw Chuck

Face Plate

Hydraulic Chuck

Double Chuck System

Steady Rest

Follow Rest

Hydraulic or Electric Milling Device

Locating Hydraulically

Boring Device

Hydraulic 4-way Tool Post

Hydraulic V8 Turret

Hydraulic V12 Turret (for EVC-1200 and

above)

Hydraulic Tailstock

C-axis Control

Power Turret

www.JMTUSA.com / www. JorgensonMachineTools.com

SPECIFICATIONS:

CNC Lathe 52 Bed 120 & 480 Swing with 8 or 9 Bore

HD 4-jaw chuck (opt.)

4-guideway design Fagor 8055i controller

HD carriage with boring device (opt.),

hydraulic 4-way toolpost (opt.) and

hydraulic tailstock (opt.)

Model mm (in) EVC-1800 EVC-2000 EVC-2500 Swing over bed 1800 (70) 2000 (78) 2500 (98)

Swing over cross-slide: Full length 1250 (49) 1440 (56) 1920 (75) Swing over cross-slide: Half length (Opt.)

1400 (55) 1600 (63) 2050 (80)

Center height 900 (35) 1000 (40) 1250 (49) Bed width 1345 (52)

Distance between centers 3000 (120) ~ 12000 (480) Travel of Full Length cross-slide X-axis: 1250 (49), Z-axis: 2600~11600 (102~456)

Travel of Half Length cross-slide X-axis: 720 (28), Z-axis: 3000~12000 (120~480) Spindle bore / Spindle nose 210 (8), 230 (9) / A2-15

Spindle speeds (4 Steps) 5 ~ 460 rpm Spindle motor 45/55KW (60/75KW Opt.)

Number of tool stations Horizontal 4 Vertical 8 OD Tool shank cross section 50 50 (2 x 2) 32 32 (1-1/4x1-1/4)

ID Tool shank diameter 60, 63, 80mm(opt.) Cutting feed rate (per rotation) X-axis: 0.001-250 mm , Z-axis: 0.001-400 mm

Rapid travel X-axis: 5 m / min , Z-axis: 5 m / min Tailstock spindle travel / Quill 300 (11) / 290 (9) (Rotary)

Tailstock spindle taper MT#7 Controller FANUC 0i-TD FAGOR 8055i

X-axis servo motor 22i (4.0 KW) FXM 74 (5.3 KW) Z-axis servo motor 30i (7.0 KW) FXM 75 (7.3 KW)

X-axis transmission Ball Screw 50mm (2) with 1:2 gear set

Z-axis transmission Ball Screw 80mm(BC 3~4M), 100mm (BC 5~6M),

Rack and Pinion (BC 7~12M)

Hydraulic pump motor 7.5KW Coolant pump motor 1.0KW

Machine Weight (3 meter BC) 33000kgs (72600lbs) 34500kgs (75900lbs) 37000kgs (81400lbs) Weight per extra meter 4500kgs (9900lbs)

Full Length or Half Length Cross Slide design depends on customers choice.

CNC Lathe 52 Bed 70 & 98 Swing with 8 or 9 Bore

FEATURES: Huge swing up to 2.5 meter.

8 and 9 spindle bores available.

Extra rigid one piece Meehanite casting bed and heavily ribbed webbing. They provide maximum stability for heavy duty cutting.

4-guildway design. All slide ways are hardened and precision ground. They result in outstanding wear resistance after long period

of uses.

High quality gears are precision ground and carburization treated. They enhance the durability and stability for heavy duty cutting.

Timken bearings from the USA.

STANDARD ACCESSORIES: CNC controller: FANUC 0i-TD or FAGOR

8055i

AC spindle motor

Spindle oil cooler

Auto lubrication system

Coolant system

H4 or V8 hydraulic turret

Chuck guard and Turret guard, Control

Panel Moving Along with Carriage

Rear Splash Guard and Chip Conveyor

(DBC8 meter)

Adapter sleeve and Tool centers

Motorized Tailstock with rotary quill

Leveling bolts & Pads

Tool box with oiler, spare fuse, paint &

tools

Operation & Service manual

OPTIONAL Accessories: 4-jaw chuck

Face plate

Steady rest

Locating Hydraulically

Boring Device (only for Full-length

Cross-slide)

Hydraulic Tailstock

C-axis Control C

Power Turret

SPECIFICATIONS:

www.JMTUSA.com

www. JorgensonMachineTools.com