+ All Categories
Home > Documents > CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC...

CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC...

Date post: 26-Mar-2018
Category:
Upload: phamquynh
View: 223 times
Download: 9 times
Share this document with a friend
12
CNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive Lakewood, NJ 08701 USA Phone: 732-719-6222 Toll Free: 800-255-5670 Fax: 732-579-5443 E-mail: [email protected]
Transcript
Page 1: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

CNC Machining Center

Specifications

Komo Machine, Inc.

1 Gusmer Drive

Lakewood, NJ 08701 USA

Phone: 732-719-6222

Toll Free: 800-255-5670

Fax: 732-579-5443

E-mail: [email protected]

Page 2: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

Table / Work Surface The work surface is precision machined aluminum, which provides superior rigidity to insure high cut quality in a variety of applications. All tables are 2" (50.8mm) cast aluminum stock.

Work Area Dimensions Length (510) ........................................................ 120" (3048mm) Length (512) ........................................................ 144" (3658mm) Width ................................................................... 60" (1524mm) All tables are available 72" wide (1829mm)

Axis Configuration The machine is configured with a traveling table, stationary gantry design. X axis (table) motion is accomplished via pre-loaded precision rotating nut ball screw. The ball screw is driven by a digital Fanuc Alpha HVI servo motor. Y and Z axis motion is accomplished via pre-loaded precision ball screws and powered by digital Fanuc Alpha HVI servo motors. The Z axis is supported by a pneumatic counterbalance system. The system is "closed loop" to minimize air use during operation. Each axis is mounted on precision ground linear guide ways with pre-loaded precision bearing trucks. A and C axis motion is accomplished via belt-driven precision gears. Both axes are driven by a digital Fanuc Alpha HVI servo motor.

2 Rev 3/29/2013

Machine Construction

Frame The machine frame is constructed of heavy wall, structural steel tubing. The frame has been designed and analyzed using Finite Element Analysis (FEA) to provide a rigid and stable machining platform. The frame components are stress relieved prior to machining. Machining is performed using a high precision machining center, capable of five sided machining in one set-up to insure parallelism and perpendicularity of the final product.

Page 3: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

3 Rev 3/29/2013

Automatic Lubrication System All positioning bearings, ball screws and racks are serviced by a centralized automatic lubrication system, activated directly by the machine control, the method recommended by the ball screw and linear guide way manufacturers.

Automatic Tool Changer Each machine is supplied with a 15 station aggregate compatible tool changer. The tool changer is powered by a Fanuc servo motor for fast, reliable tool changes.

Head Configuration Komo uses only the highest quality spindles on the entire machining center product line. Each spindle must meet exacting specifications, and is subject to a strict inspection process prior to being accepted into inventory. The main spindle is a 22,000 RPM, HSK 63F electro-spindle powered by a 20HP (15kw) AC frequency inverter. The HSK tool connection provides a rigid tool interface to insure high cutting performance in a variety of materials, with the highest quality part finish. The 5 axis spindle is not supplied with a dust collection assembly. Ask about our dust collection options.

Guarding As a standard safety feature, a tube frame is provided that surrounds the spindle work zone. This tube frame is designed to prevent the operator from entering the machine work zone during operation.

Page 4: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

Control Features Primary Features High-speed industrial CNC High-speed serial bus Network compatible USB ports (2) Windows 7 Professional 120 GB solid state hard drive 2 GB RAM Operator Interface 17" color touch screen monitor Controller keyboard Run hour / parts count display Current position display Actual feed rate display Tool length measurement Alarm / operator message display Remote diagnostic capability Spindle load meter Komo Production Manager software Manual Override Features Full function hand wheel (MPG) Traverse override Feed rate override Spindle override MDI operation Features to Simplify Programming Tool length / work zero point measure Rotary axis control Position switch Inverse time feed Stored limit check Increment system type C Helical interpolation Bell-shaped acc/dec Program restart Stored pitch error compensation Work piece setting error compensation Inch/metric conversion Custom macro B 54 work coordinate offsets 99 tool length offsets Tool offset memory type C External data input Manual feed Advanced preview control (APC) Multi-part program editing 128k (320M) part program memory Enhanced Accuracy / Speed / Part Finish for 5 Axis Machining AI contour control 1 Simultaneous 5 axis control 3D tool length offset Backlash compensation Tool radius compensation Fanuc Alpha HVI servo motors Tool center point control High speed skip Tool nose radius compensation Optional Control Features Rigid tapping 3D rigid tapping Rigid tapping retract

4 Rev 3/29/2013

Control The machine features an industry leading Fanuc 310i-B5 control with integrated PC front end. The control marries all the productivity features of a Windows® interface to the rugged reliability of a Fanuc CNC control. With over 700,000 installations worldwide, the Fanuc name is known and recognized as the leader in CNC control technology. The high speed digital servo interface allows for some of the highest acceleration/deceleration rates and raw servo accuracies in the industry.

Page 5: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

5 Rev 3/29/2013

Komo Production Manager Software Each machine includes Komo’s exclusive Production Manager Software with Intelligent Spoil Board Management©. This productivity feature takes the guesswork out of managing your spoil board, insures optimum performance of the flow-through vacuum system when nesting and provides a fast and efficient way to load programs into your CNC machining center.

User programmable buttons allow fast access to most commonly used programs

Send programs to control memory in just

seconds Ability to save partially run Schedule files due

to production interruption Multiple file select and drag-and-drop support See your programs running on the control

without switching screens

Intelligent Spoil Board Management

Power and Air Requirements

Electrical Requirements Machine is 480 volts with a full load amp draw of 52 amps *

Contact Komo Machine for new amp rating if any alterations are made to the head configuration and for transformer requirements. * Does not include vacuum pump. Vacuum pump will require a separate electrical connection. Amp rating will be supplied with the New Owner’s Manual and will vary depending on size and voltage of pump selected. Plant wiring required: 440/480 volt, 3 phase brought to main machine disconnect. NEMA 12 electrical enclosure is equipped with an industrial grade "closed loop" heat exchanger for temperature control.

Air Requirement Machine requires 22scfm (900ml per minute) maximum usage, pressure is 90-95psi (8 bar) of filtered, dry air.

Ambient Working Temperature 41º - 95º Fahrenheit (5º - 35º Celsius)

Page 6: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

6 Rev 3/29/2013

Standard Machine Specifications

Machine Space - Overall with Guarding Length (510) ....................................................... 272" (6908mm) Length (512) ....................................................... 318" (8077mm) Width ................................................................... 188" (4775mm) Height ................................................................. 173" (4395mm) Clearance under the bridge ................................ 40" (1016mm) Table height (floor to table top) ........................... 30" (762mm) Weight ................................................................. 18,000 – 26,000lbs (8165 – 11,794kg)

Table Length (510) ....................................................... 120" (3048mm) Length (512) ....................................................... 144" (3658mm) Width ................................................................... 60" (1524mm)

Travels X Axis (510) ........................................................ 138" (3505mm) X Axis (512) ........................................................ 159" (4038mm) Y Axis .................................................................. 75" (1905mm) Z Axis .................................................................. 36" (914mm) Z Axis travel available in 48" (1220mm) A Axis ................................................................... ±120° C Axis .................................................................. ±213°

Feed and Traverse Rates X Axis .................................................................. 3150 ipm (80 mpm) Y Axis .................................................................. 3150 ipm (80 mpm) Z Axis .................................................................. 735 ipm (18.7 mpm) A Axis ................................................................... 82.5°/sec C Axis .................................................................. 82.5°/sec Special options may affect feed rates and travels

Spindle / Tool Changer Speed (liquid cooled) .......................................... 22,000 RPM Power (S1) .......................................................... 20HP (15kw) Power (S6) .......................................................... 24HP (18kw) Tooling ................................................................ HSK 63F Tool changer ....................................................... 15 stations Drive system ....................................................... Precision gear box with Fanuc servo Maximum diameter (adjacent pockets full) ......... 3.25" (82mm) Maximum diameter (adjacent pockets empty) .... 6.5" (165mm) Maximum weight (per tool) ................................. 12lbs. (5.4kg) Maximum weight (full carousel) .......................... 96lbs. (43.5kg) Maximum tool length (70mm tool holder) ........... 11" (280mm)

Page 7: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

7 Rev 3/29/2013

Drive System X, Y, Z Axes ......................................................... Fanuc Alpha HVI digital servos A, C Axes.............................................................. Fanuc Alpha HVI digital servos X Axis .................................................................. Precision ball screw 1.97" (50mm) dia Y Axis .................................................................. Precision ball screw 1.57" (40mm) dia Z Axis ................................................................... Precision ball screw 1.57" (40mm) dia Lubrication ........................................................... Centralized automatic lubrication

Linear Guide Ways X Axis .................................................................. 35mm, ten (10) bearing trucks Y Axis .................................................................. 45mm, six (6) bearing trucks Z Axis ................................................................... 45mm, four (4) bearing trucks Lubrication ........................................................... Centralized automatic lubrication

Accuracies Unidirectional linear axis positioning (per meter) ........................................................... ± 0.0006" (± 0.015mm) A, C axes unidirectional repeatability ................... 20 arc seconds Machine-specific drawings are available on request. All specifications are based on the standard machine configuration. Any options or changes may result in modifications to the machine specifications.

Page 8: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

8 Rev 3/29/2013

Machine Training Machine Operation training is provided at Komo Machine for up to two (2) persons for three (3) days. Each seat of training is available for one (1) year from machine installation.

Note: Customer is responsible for travel and living costs for all training programs.

Support A Control Operator’s Manual and a Komo Operation and Maintenance Manual are supplied in CD-ROM format and are also loaded on the machine hard drive for access from the operator control station. Electrical schematics are provided in hard copy format. Also included with each machine is our world class 24/7/365 toll free technical support. As part of this support system, each machine comes equipped with Remote Diagnostics capability, allowing a Komo Support Technician to "dial into" your machine to assist in troubleshooting and minimize response time to correct a problem.

Warranty Each machine includes the Komo standard two year warranty. See the Terms and Conditions document for full information.

Installation Installation of the machine will be performed by a Factory Trained and Certified Technician. Once the machine has been positioned, the technician will level the machine, perform power up and conduct a thorough pre-production test routine. After the machine has been installed and tested, the technician will provide daily maintenance instruction and review machine operation. Travel and living expenses of technician are included with machine purchase.

Page 9: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

9 Rev 3/29/2013

Machine Options

Non-Perishable Tooling Package A complete set of HSK 63F tool holders with collet nuts and collets can be supplied as optional equipment. All tool holders are balanced to a specification of G2.5 at 24,000RPM for optimum tool performance and spindle life. Non-Perishable Tooling Package for a 15 Station Tool Changer

15 tool holders with collet nuts

15 collets

Bench top tool changing block

Collet wrench

Table Options Threaded steel inserts for the machined aluminum table

Vacuum manifold for clamping devices

Machined aluminum universal grid vacuum table (multiple vacuum zones available)

Custom table options

Vacuum System Package

Choose the right vacuum pump for your application. All pumps available in multiple horsepower and voltage options. Travaini Quincy Kaiser Becker Sizes available: 10HP (7.5kw), 25HP (18.7kw), 40HP (30kw) Additional sizes available upon request. Voltages available (3 phase): 208V, 240V, 380V, 415V, 480V, 575V Additional voltages available upon request.

All pumps are designed for fast draw-down to an ultimate vacuum for fast cycle times and more powerful hold down. The vacuum pumps are started via pushbutton on the main operator panel and come complete with a remote start relay, allowing the pump itself to be located either next to the machine, or in a remote location.

Additional 15 Pocket Side Mounted Tool Changer(s) Increase tool capacity by adding 15 pocket side mounted tool changers (maximum capacity 60 pockets) with full aggregate capability.

Page 10: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

10 Rev 3/29/2013

A and C Axis Options A and C Axis Rotary Encoders Add rotary encoders to increase the repeatability tolerance of the A and C axes to 10 arc seconds. A and C Axis Brakes Add hydraulic brakes to the A and C axes for additional rigidity when doing indexing machining operations. Rotary Distributor Add the rotary distributor to allow for continuous rotation in the X axis and eliminate the need for unwinding of the spindle head (rotary compensation is limited to ± 720°).

Integrated Pop-Up Roller Ball System Built right into the machining table, these roller balls raise and lower to facilitate material transfer, which reduces operator fatigue and increases productivity. Available on composite and aluminum universal grid tables.

Manual Material Handling System The material handling tables provide an economical option for increasing productivity and reducing operator fatigue. They include the ability to control cycle start and cycle stop from either side of the machine for complete flexibility and control.

Dual Screen The dual screen option gives you the ability to be running the standard CNC screen with the touch screen interface while running program controls and other operations on the attached 17" screen.

Page 11: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

11 Rev 3/29/2013

Mist Coolant System The optional mist coolant system gives you the capability of cutting non-ferrous metals.

Dust/Chip Enclosure Designed to handle large quantities of chips and debris, the dust/chip enclosures have port holes that can be attached to your dust collection system for quick and easy clean up of your CNC machining center.

On-Machine Part Labeling Eliminate the need for stick-on labels with the VideoJet inkjet printer head that can print labels directly onto parts as they are machined. Select this option in Router-CIM for an easy and efficient way to keep parts organized.

Additional Safety Equipment Komo offers a variety of add-on safety equipment that can be configured to any specific model and application, including but not limited to: Laser Scanners Light Curtains Pressure Mats

Page 12: CNC Machining Center Specifications - ThomasNetcdn.thomasnet.com/ccp/01268837/183123.pdfCNC Machining Center Specifications Komo Machine, Inc. 1 Gusmer Drive ... Alpha HVI servo motors.

Copyright 2013 Komo Machine, Inc. The information presented in this publication was correct at the time of press. Komo Machine, Inc. reserves the right to alter or change specifications without prior notice. Some photos may show protective guarding removed for clarity.

Never operate any machine without guarding in place and in operation.

Corporate Headquarters

Komo Machine, Inc.

1 Gusmer Drive

Lakewood, NJ 08701 USA

Phone: 732-719-6222

Toll Free: 800-255-5670

Fax: 732-579-5443

E-mail: [email protected]

Manufacturing and Assembly Facility

Komo Machine, Inc.

2 Gusmer Drive

Lakewood, NJ 08701 USA

Phone: 732-719-6222

Toll Free: 800-255-5670

Fax: 732-579-5443

E-mail: [email protected]

Since 1966

Beyond the machine… Komo is there.

The challenge for every manufacturer is never about

equipment alone, it is about seizing new opportunities.

Expanding productivity and capabilities, realizing the

value of single-source solutions, reliability and support,

and discovering an experienced partner committed to

your success.

That is Komo, and that is thinking beyond the machine.


Recommended