Sale under Management of:

Thomas Industries, Inc.2414 Boston Post Road, Guilford, CT 06437-2310

Phone (203) 458-0709 • Fax (203) 458-0727 email: gavel@thomasauction.com • www.thomasauction.com

ONLINE CNC & MACHINE TOOL AUCTIONCNC MACHINING CENTERS

• CNC TURNING CENTERS • MACHINE TOOLS • MATERIAL HANDLING • PLANT SUPPORT

BIDDING CLOSES: THURSDAY, JUNE 30, 2:00 PM (ET)INSPECTION: TUESDAY, JUNE 28, 9 AM TO 4 PM

BY ORDER OF

Tyco Valves and Controls, LP43 Kendrick Street, Wrentham, MA

Mazak Mazatech #H-800 Horizontal Machining Center

Mazak # VQC-20-40B Vertical Machining Center

O N L I N E B I D D I N G O N LY – W W W. T H O M A S A U C T I O N . C O M2

CNC MACHINING & TURNING CENTERS

CNC HORIZONTALMACHINING CENTERS

Mazak Mazatech #H-800 HorizontalMachining Center w/ (6) 31.5” x31.5” Pallets, CAT #50 Spindle,(80) ATC, Full Enclosure, ChipConveyor, Coolant System &Mazak M-32 CNC Control S/N89749, (New 1990)

CNC VERTICAL MACHINING CENTERS

Mazak # VQC-20-40B VerticalMachining Center w/ MazatrolCam-M-2 CNC Controls, S/N59967, New 1985

Monarch # VMC-75 VerticalMachining Center S/N 80130,New 1980 w/ 4th Axis Indexer

CNC TURNING CENTERS(2) Mori-Seiki #BB CNC Lathe w/Yasnac CNC Control S/N 114; 116

(3) Mori-Seiki #SL-3B CNC Lathe w/Yasnac CNC Control S/N 154;288; 216

Mori-Seiki #SL-4B CNC Turning Center,S/N 1032, w/ Chip Conveyor &FANUC 6TB CNC Control

Mori-Seiki #SL-2B CNC Slant BedTurning Center,w/ Chip Conveyor& FANUC 6TB CNC Control

Hitachi Seiki # 7NF-1100 CNC SlantBed Turning Center w/, 24” 3-JawChuck & Fanuc 6TB CNC control,S/N NF-7011

(3) Cincinnati Milacron # Cinturn-12C CNC Chucking Centers, S/N5305C12-75-002; S/N 5305C12-77-019, S/N 5305B12-75-003 w/Acramatic CNC Controls

Cincinnati Milacron # Cinturn-18CCNC Chucking Center S/N5305C18-75-002 w/ AcramaticCNC Control

MILLING MACHINES -VERTICAL

Bridgeport 2 HP Series I MillingMachine , 9”x 42” Table & PF, S/N12BR/198002

(4) Bridgeport 1.5 HP Vertical Millerw/ 9” x 48” and 9”x 36” Tablesand DRO, S/N 236678,121437,164838, 119745

Induma Universal Horizontal/VerticalMilling Machine

MILLING MACHINES -HORIZONTAL

Kempsmith #2 Plain HorizontalMilling Machine

ENGINE LATHEMori-Seiki #MH-1000G “Gap Type”Engine Lathe w/ 26”/32” x 40”,3.125” Spindle Hole, S/N 3517

Mori-Seiki #SL-4B CNC Turning Center

Mazak Mazatech #H-800 HorizontalMachining Center

Mazak # VQC-20-40B Vertical MachiningCenter

Mori-Seiki #SL-2B CNC Slant Bed TurningCenter

26" Bullard # 75 VTL w/DRO36" Webster & Bennett # DH-36 VTLw/DRO

REGISTER NOW & BID – WWW.THOMASAUCTION.COM

SALE DATE: THURS. JUNE 30, 2:00 PM (ET)INSPECTION: TUES. JUNE 28, 9 AM TO 4 PM

3

TURRET LATHE(2) Warner & Swasey #2A (M-3470)Square Head Turret Lathes S/N1889391& 2216654

Warner & Swasey #5 (M-2250)Square Head Turret Lathe S/N2216653

Warner & Swasey #3 (M-2200)Square Head Turret Lathe S/N1962655

Warner & Swasey #4A Turret LatheS/N 541316

CNC KNEE MILLChevelier #F4-8H CNC Knee Mill w/9” x 42” Table, Power Draw Barand Delta Dynapath CNCControls S/N FM-839124

VERTICAL BROACHTy-Miles 10 Ton Vertical BroachModel MB-10-24-120R, 24” Stroke,S/N 790524

LAPPING MACHINELapmaster #15 Lapping MachineS/N C18482

DRILLSCincinnati Bickford “Super Service”Multi Spindle Drill

VERTICAL TURRET LATHESBullard #75 “Cutmaster” ,26”Vertical Turret Lathe w/ 3-JawChuck, (5) Position Turret andDRO, S/N 29801

Webster & Bennett # DH-36, 36”Vertical Turret Lathe w/ (5) PositionTurret, 4-Jaw Chuck and DRO

DRILLS - RADIAL ARMGiddings & Lewis “Chip Master”Radial Drill 5’ x 11” Column, Model#952, S/N 00138 w/ Box Table

Ooya Radial Drill Model RE2-1450A, S/N OA6-3571, 5’x 13”,

Invema # FR-65-1600 Radial Drill,6’x 16”

Cincinnati Bickford 11” x 3’ RadialArm Drill

FINISHINGDayton Sandblaster Model 3Z850w/ Dust Collector

GRINDERSBlake Tap Grinder Model 2JBrown & Sharpe 6” x 18” “Micro-Master” Surface Grinder,Hydraulic S/N 523-6181-7218

Do-All # D-10 ,10” x 24” HydraulicSurface Grinder

Hammond 4” Heavy Duty BeltGrinder

Hammond Model 10 Double EndGrinder

HYDRAULIC PRESSESEnerpac 4-Post Hydraulic PressModel PNF-550-900, S/N 3467-1041F67, 100 Ton ,48” Left toRight

Enerpac 4-Post Hydraulic PressModel PER-3032, S/N CE6582, 100Ton Capacity, 36” Left to Right

Air-Hydraulics Press Model C400A,S/N 6472

Mori Seiki Lathe Warner & Swasey #5 (M-2250) Square HeadTurret Lathe

Bridgeport 2 HP Series I MillingMachine

Mori-Seiki #SL-3B CNC Lathe Cincinnati Milacron # Cinturn-18C CNCChucking Center

Hitachi Seiki # 7NF-1100 CNC Slant BedTurning Center

1 of 2

C O M P L E T E L O T C ATA L O G & P H O T O S – W W W. T H O M A S A U C T I O N . C O M4

MACHINE TOOLS • VERTICAL TURRET LATHES • BROACHES • INSPECTION

SAWSDo-All #16-2 Vertical Band Saw w/Welder S/N 45-56895

Keller 12” Reciprocating Hack SawKalamazoo Band Saw, Portable,Horizontal

OVENSGrieve #333 Oven w/ DigitalControls, Max. Temp 350Degrees F S/N 57727

New England #TC-CAB ElectricFurnace, 30 KW w/ DigitalControls S/N 4994

Blue M #OV-490A Oven S/N OV3-17143

PARTS WASHERBetter Engineering Model 200-HDVertical Rotary Parts Washer, S/N6908, Single Phase, 60 HZ, 240Volt

INSPECTIONJones & Lamson # TC-14 OpticalComparator

FORKLIFTSAllis Chalmers 8000 lb LPG Forklift,Solid Tire

Hyster 5000 lb LPG Forklift, S/NC02017917A, Triple Mast

Crown 3000lb Electric Forklift Model30SCTL, 3-Wheel, Solid Tire, S/NW-8579, 154” Lift

Hyster 2500 lb Electric Forklift, S/NK-129, 24 Volt Battery

Big Joe 2000 lb Electric Lift ModelTDI20-T12, Lift Height 144”, S/N339460

Brown & Sharpe 6" x 18" “Micro-Master” Surface Grinder

Grieve #333 Oven

Do-All #16-2 Vertical Band Saw Ty-Miles 10 Ton Vertical BroachModel MB-10-24-120R

Giddings & Lewis "Chip Master"Radial Drill

Pneumatic PressBlack Diamond Drill GrinderModel DW-75

OIL CHIP EXTRACTORPrab Oil Chip Extractor System S/NS03037GA, Consisting of ALangley Model EC54SB S/NM12369A Parts Dumper

Continuous to a Scrap ChopperContinuous to Conveyor FeedsThrough a Spin Separator, ChipDischarge

BRIDGE & JIB CRANESCM Lodestar 1/2 Ton Free StandingJib Crane, 2,000 Lb Capacity

Demag Overhead Bridge Crane, 5Ton, Pendant Control,Approximately 20’ Span

(50) Demag, Budgit & Yale FreeStanding Jib Cranes w/ 1 Ton &½ Ton Electric Hoists

AIR COMPRESSORSIngersoll Rand 25 HP AirCompressor Model 25T-T3025LTM,S/N 30T330845

Worthington 20 HP Air CompressorS/N 876526

Maxair 15 HP Air CompressorWorthington 10 HP Air Compressor,Size 6/6/4 1/2 x 2 1/2, S/N 876

Speedair 3 HP Vertical AirCompressor

Zeks Air Dryer Model7SS3000BA200, S/N 94238

C O M P L E T E L O T C ATA L O G & P H O T O S AT W W W. T H O M A S A U C T I O N . C O M

AUCTION INFORMATION WWW.THOMASAUCTION.COM

By Order of

Tyco Valves and Controls, LP43 Kendrick StreetWrentham, MA

BIDDING CLOSES: THURSDAY, JUNE 30, 2:00 PM (ET)

INSPECTION: TUESDAY, JUNE 28, 9 AM TO 4 PM

OPEN HOUSE INSPECTION:Tuesday, June 28, 9 AM to 4 PM

REGISTER & BIDat www.thomasauction.com

FIRST LOT CLOSES:Thursday, June 30, 2:00 PM (ET)

Buyer’s Premium: 15%

Disclaimer: Auctioneer is not responsible forerrors, omissions, additions or deletions.Items offered may not necessarily be soldas described and/or photographed. Buyersshould verify all aspects of their potentialpurchases during inspection as all itemsoffered will be sold “as is, where is” with allfaults. Please check with the auctioneer’soffice for additions or deletions.

Proxy BidsIf you are unable to participate in this saleProxy Bids are accepted. Proxy bids maybe submitted online directly from the lotcatalog or call (203) 458-0709 for a proxybid form.

COMPLETE TERM & CONDITIONS ANDAUCTION INFORMATION AT:

THOMAS INDUSTRIES, INC2414 BOSTON POST RD.GUILFORD, CT 06437203 458 0709

GAVEL@THOMASAUCTION.COM

www.ThomasAuction.com

5

AUCTION INFORMATION

PLANT SUPPORT(2) Yellow Bellied 3-HP Portable OilPump Suckers

Black Diamond Drill Grinder ModelDW-75, Single Phase, Range1/16” to 1/2”, S/N 25072

Baldor Double End CarbideGrinder,

Ridgid Model 300-2T, S/N ED12478Bench Model Pipe Threader

Burgmaster #2D Turret DrillEnerpac 100 Ton Hydraulic ShopPress

So-Low “Ultra Low Freezer” w/-40 Cto -85C, Model C85-9, S/N04051253

Greenerd # 3 Arbor PressMaco 50 HP Backup Generator

Cincinnati Electronic Tool Gage,S/N 3171A2181-0046

Marathon 100 HP PumpTritan Model 3075 HydrolaserPlunger Pump, 38 Plungers, S/N63115 Pressure 15,000, Flow 2GPM, Max RPM 500

Hause Holomatic Model 2408 S/N790367 Horizontal Drilling System

Peerless 200 HP Pump ValveCombination

Everett 16” Bench Model AbrasiveCut Off Saw

Delta 3-Spindle Drill PressSpencer Blower 40 HP, 3500 RPM,2800 CFM, S/N 258828

Galbreath Self Dumping Hopper;

GNB Battery Charger ModelGTC1112-600S1; (15) CecorPortable Dumping ContainersModel DB-244-6P-TRT-S2;Aluminum & Extension Ladders;P&H AC Arc Welder, 230 Volt/460Volt; Aircraft Ladders; PlymoventDust Collector; Dry Rod StablizingOven; Large Quantity of CAT #40& #50 Tool Holders; (2) 31.5” x31.5” x 36” H Tombstones; (2) 26”x 26” x 30” H Tombstones; LargeSelection of MiscellaneousMaintenance Supplies, V-Belts,Electrical Fittings, Brass Fittings

Harig Super 618 Surface Grinders View of Budgit Chain HoistsSo-Low "Ultra Low Freezer"

THOMAS INDUSTRIES APPRAISAL DIVISION

Accurate appraisals supported byover 56 years of conducting world-wide auctions and liquidations.

Call (203) 458-0709 for a confidential

appraisal of your assets.One piece of equipment

or an entire plant.

FORWARDING SERVICE REQUESTED

PRESORTED FIRSTCLASS MAILU.S. POSTAGE

PAIDPermit No. 80Milford, CT

ONLINE CNC & MACHINE TOOL AUCTION

AUCTION INFORMATION • WWW.THOMASAUCTION.COM • 203-458-0709

THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

Under Management of:

ONLINE CNC & MACHINE TOOL AUCTIONCNC MACHINING CENTERS CNC TURNING CENTERS MACHINE TOOLS MATERIAL HANDLINGPLANT SUPPORTBy Order of

Tyco Valves and Controls, LP43 Kendrick Street, Wrentham, MA

BIDDING CLOSES: THURSDAY, JUNE 30, 2:00 PM (ET)

INSPECTION: TUESDAY, JUNE 28, 9 AM TO 4 PM

Buyer’s Premium 15%

Mori-Seiki #SL-2B CNC Slant Bed Turning Center Chevelier #F4-8H CNC Knee Mill

BIDDING CLOSES: THURSDAY, JUNE 30, 2:00 PM (ET)INSPECTION: TUESDAY, JUNE 28, 9 AM TO 4 PM

BY ORDER OF

Tyco Valves and Controls, LP43 Kendrick Street, Wrentham, MA