Date post: | 29-Mar-2015 |
Category: |
Documents |
Upload: | zander-lipson |
View: | 219 times |
Download: | 0 times |
CNC- Machining CentersOptional Aggregates
Aggregates
High torque through optimized gears
Little wear due to precise high quality bearings and special hardened surfaces of the gears
Modular design for best flexibility
Optional Aggregates Available
78533+1 Spindles
Drilling
78542-Spindles
Drilling, SawShaping
7950Floating head
79531-Spindle
Drilling, Saw,Shaping
79542-Spindles
Drilling, Shaping
7855 / 7856 / 7857VarioNC (4½ Axes)
Drilling, SawShaping
Optional Aggregates Available
79551-Spindle
Saw unit (heavy duty)
79562-Spindles
Drilling, SawShaping
79582-Spindles
Lock case
Moulding (Omega)
79592-Spindles
Lock case, Shaping
79831-Spindle
Saw, Shapeing
79574-Spindles
Drilling, Shapeing
Optional Aggregates Available
79841-Spindle
Drilling, SawShapeing
79863-Spindles
Drilling (Horizontal)
79871-Spindle
Drilling, SawShaeping (45° fixed)
79881-Spindle
Saw
NCcollet chuck
drilling
Saw with scoring unit
Optional Aggregate# 7853
Data sheet
Optional Aggregates# 7853
HSK-F 63 collet chuck Drilling Transmission ratio: 1:1,48 9,000 rpm 3+1 spindles for collet chuck
- 0,5 – 10 mm, ER16 Drill bits with effective length up to 130 mm Drill centers in 32 mm grid 3x clockwise and 1x counterclockwise Rotatable from 0° - 360°
Optional Aggregates# 7854
Datenblatt
Optional Aggregaqtes# 7854
HSK-F 63 collet chuck Transmission ratio: 1:1,48 9,000 rpm 2 spindles with collet chucks
1–16 mm, ER25 / 3–20 mm, ER32 With saw blade mount
– D = max. 220 mm, d=30 mm– 2 x driving pins, d=6 mm
Rotatable 0° - 360°
Optional AggregatesVarioNC
VarioNC 7855 (collet chuck/ saw blade mount)
VarioNC 7856(Saw blade mount)
VarioNC 7857 (ET Clamping system)
Optional AggregatesVarioNC
For machining workpiece in free plane Workpiece positioning by
– Turning (C-axis 0° - 360°) – Inclining (A-axis 0° - 100°)
Positioning of axis results from one after another (A- and C-axis)
All positioning operations are always performed outside the machining operation.Interpolation during machining is not possible.
Changing Units (Option)Turning mitre gear drive 7855
Datenblatt
Changing Units (Option)Turning mitre gear drive 7855
with HSK-F 63 collet chuck Transmission ratio: 1:1,09 Nout (max.) 15.000 rpm
1 spindles with collet chuck
- 1-16 mm, ER25 mini With saw blade mount
d = 30 mm, max. Ø 200 mm Pivot range 0° - 100° Rotable from 0° - 360° Oil bath lubrication Variant-Packages
Changing Units (Option)Turning mitre gear drive 7856
Datenblatt
Changing Units (Option)Turning mitre gear drive 7856
with HSK-F 63 collet chuck Transmission ratio: 1:1,09 nout (max.) 15.000 min-1
1 spindles with saw blade mountd = 30 mm, max. Ø 200 mm
Pivot range 0° - 100° Rotable from 0° - 360° Oil bath lubrication
Variant-Packages
Changing Units (Option)Turning mitre gear drive 7857
Datenblatt
Changing Units (Option)Turning mitre gear drive 7857
with HSK-F 63 collet chuck Transmission ratio: 1:1,09 nout (max.) 15.000 rpm
1 spindles with collet chuck
= 30 mm, max. Ø 200 mm Pivot range 0° - 90° Rotable from 0° - 360° Oil bath lubrication
Variant-Packages
Changing Units (Option)VarioNC Variant-Packages
Vector axis (C-axis) 0°-360° can be turned infinitely
Tool changer 789212 /14 /16-fold-Magazin Pick-up
Max. Ø tool: > Space 1- 7: Ø 100 mm > Space 8-14: Ø 110 mm Maximum tool weight: > 5 kg per tool > 60 kg when full
For collect chuck with HSK shank
1x VarioNC angle pivoting gear
selectable from: 7855 / 7856 / 7857
Variant 1
Vector axis (C-axis) 0°-360° can be turnedinfinitely
Tool changer 78902-fach-Magazin - Pick-up
Max. Ø tool: > Ø 200 mm Maximum tool weight: > 6 kg per tool
For collect chuck with HSK shank
1x VarioNC angle pivoting gearchoosable from: 7855 / 7856 / 7857
Variant 2
Changing Units (Option)Floating head with head cone 7950
Changing Units (Option)Floating head with head cone
Floating head 7950,with HSK 63 F shaft – nout (max.) 10,000 rpm – with collet chuck
of 2 - 16 mm, ER25 – tracer machining
Floating head cone – with inside diameter 110 mm – with inside diameter 65.5 mm
(for floating head 7950)
Changing Units (Option)Turning mitre gear drive 7953
Datenblatt
Optional Aggregates# 7953
With HSK 63 F collet chuck Transmission ratio: 1:1 15,000 rpm Pivot range 0° - 100° With adjusting bolts with
marked angle positions Rotateable from 0° - 360°
(manual adjustment)
Optional Aggregates# 7953
With collet chuck – 1–16mm, ER25
With saw chuck – D = max. 180 mm, d = 30 mm
Maintenance-free
Optional Aggregates# 7954
Datenblatt
Optional Aggregates# 7954
With HSK 63 F collet chuck Transmission ratio: 1:1.48 15,000 rpm Rotateable from 0° - 360°
(manual adjustment) 2 spindles with collet chucks
1–16mm, ER25 Drill bits effective length up to 130 mm 1x clockwise and 1x anticlockwise Maintenance-free
Optional Aggregates# 7955
Datenblatt
Optional Aggregates# 7955
With HSK 63 F collet chuck Transmission ratio: 1:0.676 10,000 rpm Rotateable from 0° - 360°
(manual adjustment) With saw blade mount
– D = max. 220 mm, d=30 mm – 2 x driving pins, d=6 mm
With self-securing clamping coverd = 56mm
Oil bath lubrication
Optional Aggregates# 7956
Datenblatt
Optional Aggregates# 7956
With HSK 63 F Transmission ratio: 1:1.48
15,000 rpm Rotateable from 0° - 360°
(manual adjustment) with collet chucks
1–16mm, ER25 With saw blade mount
– D = max. 160 mm, d=30 mm
– 4 x fixing screws Maintenance-free
Optional Aggregates# 7957
Datenblatt
Optional Aggregates# 7957
With HSK 63 F Transmission ratio: 1:1.48 15,000 rpm
Rotateable 0° - 360° (manual adjustment)
Maintenance-free 4 spindles unit with collet chucks
– 2 x 1–16mm, ER25 / 2 x 3 – 20 mm, ER 32 2 x clockwise and 2 x counterclockwise Saves valuable change-over time
Optional Aggregates# 7958
Datenblatt
Optional Aggregates# 7958
With HSK 63 F Lock case / cutting Transmission ratio: 1:1 12,000 rpm 1 spindle unit for tool shaft
d = 16mm Counterclockwise rotation Max. workpiece thickness 60 mm Maintenance-free
Optional Aggregates# 7959
Datenblatt
Optional Aggregates# 7959
With HSK 63 F Transmission ratio: 1:1.48 15,000 rpm 2 spindles unit with
– collet mount 2–20 mm, ER32 – collet mount 1–10 mm, ER16
1 x clockwise and 1 x counterclockwise Maintenance-free
Optional Aggregates# 7983
Datenblatt
Optional Aggregates# 7983
With HSK 63 F Transmission ratio: 1:1.48 12,000 rpm Tool fixing using
- 4 x countersunk bolts Tool diameter
- D = approx. 70 mm Ideal for sharp-edged coping
of corner cutouts (90°)
Optional Aggregates# 7984
Compact (short-length) design With HSK 63 F Drilling / cutting / sawing Transmission ratio: 1:1 12,000 rpm Pivot range 0° - 100° Rotateable from 0° - 360°
Optional Aggregates# 7984
With collet chuck – 1–16mm, ER25
With saw collet mount– D = max. 180 mm, d = 30 mm
Maintenance-free
Optional Aggregates# 7986
Datenblatt
Optional Aggregates# 7986
HSK-F 63 collet For horizontal drilling on
matrix table Distance between drill axis and
lower edge of housing: 7.8 mm Transmission ratio: 1:4 12,000 rpm
Rotateable from 0° - 360° 3 cylindrical drill collet
with clamping screw – 32 mm grid
(only in conjunction with C-axis with pneumatic system)
Optional Aggregates# 7987
Datenblatt
Optional Aggregates# 7987
HSK-F 63 Drilling / sawing / routing
45° (fixed) Transmission ratio: 1:1 12.000 rpm 1 spindle with collet chuck
1–16 mm, ER25 Rotation clockwise With saw blade mount
– D = max. 180 mm, d=30 mm Oil bath lubrication
Optional Aggregates# 7988
Datenblatt
Optional Aggregates# 7988
HSK-F 63 Transmission ratio: 1:1 12.000 rpm Pivot range 0° - 100° 1 spindle with collet chuck
– D = max. 180 mm, d=30 mm Rotateable from 0° - 360°
with C axis
Optional AggregatesNC-drill chuck
Datenblatt
Changing Units (Option)NC-drill chuck
HSK-F 63 24,000 rpm Clamping range 3-16 mm infinitely adjustable
ideal for intermediate sizes Collet chuck is eliminated
Optional AggregatesScoring Saw Unit
Optional AggregatesScoring Saw Unit
12- / 14- / 16-fold pick-up tool changer necessary HSK 63 F Scoring depth set manually using swivel arm Skew setting (scoring saw / main saw) via
setscrew and digital counter Specially matched tooling system
(scoring saw / main saw ground as a set)
Optional AggregatesScoring Saw Unit
Angle gear– Main saw Ø 250 mm, n(max.) 5.300 rpm– Scoring saw Ø 100 mm, n(max.) 15.900 rpm
– (only in combination with C-axis with pneumatic drive)
advantages:– excellent cutting results– Particularly suited for veneered panels coated with
laminate