CNC milling machinesM illing Centres
ZAYER has been manufacturingmilling machines and millingcentres in Vitoria-Gasteiz (a strategicindustrial enclave in the BasqueCountry) since 1947, with a level ofquality that only a company withover 50 years' experience of placingthe best of its entrepreneurial spiritand ability to innovate at the disposalof its customers can offer.
Spanning more than half a century,the company's development beganin a small workshop occupying aspace of 200 m2, where 2 years ofintensive work gave rise to the firstmilling machine models with asaddle. Progressive business growthresulted in us moving to Betoño in1957, where our first high-capacityfacilities were built.
A splendid staff comprising 225people currently works at ZAYER'shead office, which is spread over20,000 m2.
The entrepreneurial attitude thatZAYER adopted from the outset ledus to export our first milling machineto Brazil in 1954. Since then, ourvolume of exports has expanded toencompass over 70% of our totalproduction.
Germany, Italy, France, Brazil,China, India, Holland, Belgium, theUSA, Austria and Turkey areamong the markets on which ourmachining solutions have beentried and tested, and where theirquality has met with approval.
Our global presence is based on anextensive sales network, withcompany branches in France, Italy,Mexico, Brazil and China. In addition,distributors and agents with highlyskilled customer service teams arepermanently on hand to cater for ourcustomers in more than 40 countries.
Our staff constitute anunbeatable guarantee of theoverall quality of each of ourproducts.
O U R P H IL O S O P H Y
We aim to offer our customers productswith high added value, where technologyand quality are concerned.
That has led us to implement state-of-the-arttechnological developments, as well as policesgeared to continuous improvement as regardsboth the design of our machines and thequality control processes that they undergo.
We believe that to be the best strategyfor retaining our leadership in the fields oftechnology and quality.
In order to develop that strategy, we employprofessional experts who, working withcutting-edge equipment, take care ofeverything from the design, meticulousproduction and precise assembly of ourmachines to personalised technical supportfor our customers.
P R E -S A L E S
Before offering each of our products,we undertake a thorough processgeared to familiarising ourselveswith and analysing the customer’sspecifications.
We regard that as being the bestway to provide the customer with aproposal for the high-technologymachining solution that best meetstheir requirements.
The qualifications of our staff enableus to prepare time studies, todevelop machining processes andto engage in part programming.
The inquiring minds of our engineersand their constant interest in enhancingour design, creation and productionprocesses through the incorporationof state-of-the-art technology make usa reliable, leading company. Ourparticipation in international R&Dprojects is testimony to our permanentfocus on achieving such continuousimprovement.
Our in-depth knowledge of thedifficulties that milling entails hasenabled us to create a newtechnological concept, namely highperformance.
Standard high speed features areoften underused due to the materialbeing worked on or the very natureof the job in hand. This is where thehigh performance concept takeson the greatest importance, as itinvolves a blend of parameters thatimprove individual productionprocesses and overall facilityproductivity.
The high performance rangecombines the traits of traditionaland high speed machines to offerevery user the most appropriatesolution for the type of work theywant to carry out.
D E V E LO P M E N T & IN N O V A T IO N
Die cutting
30 KFG - AR
KPCU-AR
P R O D U C T
Table lengthTable width
Longitudinal travel
Cross travelVertical travelMain motor power
mmmm
mm
mmmmkW
Models
StructureRange and models
Our product range comprisesgantry, bridge, moving column andbed type milling centres andmilling machines.
Our machines are intended for themanufacturing of dies and mouldsfor the automotive, wind power,railway, maritime, aeronautics andaerospace sectors, as well as formachining in general.
(*Optional)
TurbinesW
ind Power
Aeronautics
KFCU - AR
FMCU-AR
Bed Type
2 0 KF/ 2 0 KFU
3000-50001000 (1300)*
2700-4700
12001000 (1500)*
28
3 0 KF/ 3 0 KFU
3000-50001000 (1300)*
2700-4700
1250 (1500)*1500 (2000)*
37
3 0 KFG - AR
1350-1850-2500
1250 (1500)*1500 (2000)*
37
1000-1250-16001000-1250-1600
KFC/ KFCU-AR
3000-80001000 (1300)*
2700-7700
1250 (1500)*1500 (2000)*
37
3700-117001200
2400-3400 (KM)4200-10200 (KMC)
12001000 (1500)*
28
2 0 KM / 2 0 KM U20KMC/ 20KMCU
3700-117001200
2400-34004200-102001250 (1500)*1500 (2000)*
37
3 0 KM / 3 0 KM U30KMC/ 30KMCU2 0 KFG
1350-1850-2500
1200800 (1300)*
28
1000-1250-16001000-1250-1600
Prismatic guideways Roller packs Rack and double motor and pinionZAYER head
30 KCU-ARKMCU-AR
MEMPHIS
Bridge type
Cutting-edge industries requireequipment that provides speed andflexibility. ZAYER offers multifunctionalsolutions based on traditionalproducts, resulting in durability,tremendous reliability and high precision.
We are thus able to provide eachcustomer with a specific, custom-made machine in which the milling,boring and turning functions can becombined to enhance precision, reducecosts and minimise the need to handleparts.
M oving column
GMCU-AR GPCU-AR/ 2C
3000-40001800
2700-3700
30501100
37
KP/ KPU-AR
4000-80002000 (2500)*
4000-8000
3550110037
KPC/ KPCU-AR
6000-150002000 (4000)*
6-15000
3550-55501100 (1250)*
40
FPC/ FPCU-ARFM C/ FM CU-AR
5000-280002000-3000
4000-27000
4050 (4550-5050)*110040
GPC/ GPCU-ARGM C/ GM CU-AR
2500-115002000 (3000)*
3000-12000
2000 (3000)*110028
M EM PHISM EM PHIS U
60 KCU-AR
4700-157001200
3200-14200
1250 (1500)*1500 (2000)*
37
KM C/ KM CU-AR
5000-250002000-4000
4000-24000
1250 (1500)*3500 (4000)*
60
6 0 KC/ 6 0 KCU
5000-110001500
4000-10000
12001500 (2000)*
28
2 0 KC/ 2 0 KCU
5000-160001500-2000
4000-15000
1250 (1500)*2000 (2500-3500)*
37
30KC/ 30KCU-AR
Range and models
All the structural components ofZAYER’s machines are designedusing state-of-the-arttechnologies, such as 3D designand finite element analysis.
Additionally, the aforementionedstructural components aremanufactured in pearlitic cast iron,giving them greater structural andthermal stability.
In conjunction with our guide system,the above constitutes a guaranteeas regards the ultimate finish of eachpart worked upon, thanks to optimalperformance in terms of vibrationsduring machining.
StructureP R O D U C T
FMC bed
30 KC-AR column
KPs / FPCs / FMC Ram
KMC-AR/ 30 KC-AR saddle
Head
Prismatic guideways Roller packs Rack and double motor and pinionZAYER head
Made from hardened steel, theguideways of our machines areprismatic and straightened, with ahardness of HRC 58-62 and a boxsection with a thickness of 60 mm.
In contrast to the guideway systemsused by most of our competitors,the preload in ZAYER machines isprecisely adapted to the requiredvalues thanks to tempered steel rollerpacks, with independent,adjustable preloading.
The most important aspect is that theaforementioned values can bemaintained and adjusted over time,meaning that the machine will notlose its original specificationswhere performance and precisionare concerned, even after manyyears of service.
P R O D U C T
ZAYER was the first Spanishmanufacturer of machine tools tointroduce a 45º head to the market.The company has more than 30years’ experience of developing andmanufacturing the product inquestion.
With 360,000 positions and thecapacity to rotate at up to 6,000min-1, ZAYER’s automatic 45º headcan be positioned in increments of0.001º, on the head and the elbowalike (continuous work is possiblein the latter case). Patented in1994, the automatic 45º head isfurther proof of our capabilities interms of innovation anddevelopment.
StructureRange and models
ZAYER automatic4 5 HEAD with
3 6 0 ,0 0 0 positions
Two axes with 360,000 positions inincrements of 0.001º and a rotation
speed of 6,000 min-1
Direct position reading
Interchangeable with other typesof heads
Rack and double motor and pinionPrismatic guideways Roller packs ZAYER head
Our machines are developed to befitted with a wide range ofaccessories, as well as withdifferent kinds of heads, and evenwith a quill with automaticmovement, in certain cases.
We thus offer our customers theoption of optimising the functionsand features of their machines,based on their requirements and thenature of the work to be undertaken.
The use of a Rack and doublemotor and pinion to drive the X andY axes (longitudinal and cross,respectively) is one of the main traitscommon to most of the machinesthat ZAYER manufactures.
Electronically preloaded, the systemin question provides improveddynamics and eliminates play.The use of this system enhancesthe acceleration of our machines.
45 Manual Head
45 Automatic Head
TW IST Head
TW IST + Electrospindle
Direct Outlet Head
Direct Outlet with Quill
With a view to maintaining ourcharacteristic level of leadership andguaranteeing the high quality of ourproducts, we boast the market’s finestproduction equipment, includingZAYER bridge and gantry millingmachines.
E Q U IP M E N T
Q U A L IT Y
Behind our reliable, renowned, highcalibre production equipment, thereis a quality control department thattests and checks all our productson the basis of internationalregulations.
The use of cutting-edge methodsand apparatus for the purposes ofquality control guarantees the finestresults and constitutes thecornerstone of our total-qualitypolicy. ZAYER has held UNE-ISO9001 certification, issued byAENOR, since 1996.
A F T E R -S A L E S
Our customer service reflectsour unique concept of quality.
Our customers are safe in theknowledge that immediate,effective, professional technicalsupport is available to them at alltimes, for each and every one of theproducts that we supply.
To that end, we provide training onmachine operation and
maintenance, so as to guaranteeoptimal results.
International
AustriaINDUSTRIAmaschinen@industria-dohmen.comwww.industria-dohmen.com
Czech [email protected]
[email protected]@c-henriksen.dk
FinlandMACHINERY OYwww.machinery.fi
IndiaEMMAR MACHINE [email protected]
S A L E S N E T W O R K
Company branchesSales network
Head officePol. Ind. BetoñoPortal de Bergara, 7Apdo. 16301080 VITORIA-GASTEIZSpainTel.: 34 945 26 28 00*Fax: 34 945 28 66 [email protected]
BrazilZAYER BRASIL LTDA.Rua Jose Getulio 579 – cj. 12101509-001 Bairro LiberdadeSAO PAULO, SP - BrazilTel: +55 11 33 41 00 13Fax: +55 11 3271 9103E-mail: [email protected]
ChinaZAYER BEIJING OFFICERoom 601, Tower A, City One Building, No. 48Wangjing xilu, Chaoyang District, Beijing, P.R. of China.Zip code: 100102.Tel: +86 010 647 87304, 13601011719Fax: +86 010 64787366Email: [email protected]
SHANGHAI ZAYER MACHINE TOOL TECHNOLOGY COMPANYSiping Road, No. 775, Building 2, Room 1405200092 Shanghai, CHINATel: +86 21 55150431Fax : +86 21 55150432Email: [email protected]
FranceZAYER FRANCIASabino Matesanz, S.L.C/Pikoketa nº 8 - Galerias Bellas Artes nº 1620302.- IRUN (GUIPUZCOA)Tel: +34 943 635 652Fax : +34 943 635 149Email: [email protected]
ItalyZAYER ITALIA S.R.L.Business Palace - C.so Susa, 299/A10098 RIVOLI (TO)Tel: +39 011 956 32 05Fax: +39 011 956 32 07E-mail: [email protected]
M exicoZAYERMEX, S.A. DE C.V.Blv. Venustiano Carranza 4120 L 16Col. Villa Olímpica - EUROPLAZA MALLC.P. 25230 Saltillo (Coah) - MexicoTel/Fax: +52 844 415 12 55 / +52 844 415 10 90E-mail: [email protected]