COYOTE® Axcess Solutions™ Fiber Wall Plates

Features and Bene� ts• Designed to store a pre-connectorized pigtail for connection to a mating adapter

• Mounts to standard electrical junction boxes or wall

• Internal � ber routing provides bend radius control

• Hinged door provides open access for easy � ber connection or removal

• Internal adapter with automatic shutter provides protection from laser light output

• Flame-retardant

The COYOTE Axcess Solutions Fiber Wall Plates are compact � ber organizers used to create a � ber demarcation point inside the home, office, or apartment. Internal � ber routing features control bend radius and allows for slack storage outside of the wall cavity. Speci� c designs also provide for splicing inside the wall plate. Each wall plate is produced from � ame retardant compounds, is easy to install and is capable of being mounted directly to a standard electrical junction box or a wall.

COYOTE Fiber Wall Plate Kit ContentsCatalog Numbers Description

8006992W COYOTE Fiber Wall Plate in White – Includes (1) Base, (1) Cover, (1) SC/APC Factory Installed Adapter and (1) Mounting Hardware Kit

8006992WUPCCOYOTE Fiber Wall Plate in White – Includes (1) Base, (1) Cover, (1) SC/UPC Factory Installed Adapter and (1) Mounting Hardware Kit

8006992IVCOYOTE Fiber Wall Plate in Almond – Includes (1) Base, (1) Cover, (1) SC/APC Factory Installed Adapter and (1) Mounting Hardware Kit

80061285WCOYOTE Fiber Wall Plate in White – Includes (1) Base, (1) Cover, (1) Duplex LC/UPC Factory Installed Adapter and (1) Mounting Hardware Kit

Specifi cationsCatalog Numbers 8006992W, 8006992WUPC, 8006992IV, 80061285W

Splice Capacity 0

Adapter Port Quantity (Maximum) 1 Simplex SC or 1 Duplex LC

Colors White or Almond

Cable Entrance Ports (1) Bottom Edge and (1) Back of Base

Size 4" W x 6" L x 1" D (102 x 152 x 25 mm)

COYOTE® Axcess Solutions™ Fiber Wall Plate

Cable Entrance Port

Pre-ConnectorizedCable Exit Port

Hinged Door

Cover

Base

Automatic Shutter

SC/APC Adapter

Fiber Routing ChannelCable Entrance Port

COYOTE® Axcess Solutions™ Splice & Store Fiber Wall Plate

Features and Bene� ts• Designed for splicing and storing a pre-connectorized � ber pigtail

• Provides up to 8 ft (244 cm) of 2 mm or 4 ft (122 cm) of 3 mm jacketed � ber

• Fiber entrance ports through the back and bottom edge of the wall plate

• Flame-retardant

The COYOTE Axcess Solutions Fiber Wall Plates are compact � ber organizers used to create a � ber demarcation point inside the home, office, or apartment. Internal � ber routing features control bend radius and allows for slack storage outside of the wall cavity. Speci� c designs also provide for splicing inside the wall plate. Each wall plate is produced from � ame retardant compounds, is easy to install and is capable of being mounted directly to a standard electrical junction box or a wall.

Global Headquarters 660 Beta Drive Cleveland, Ohio 44143 Mailing Address: P.O. Box 91129 Cleveland, Ohio 44101Telephone: 440.461.5200 Fax: 440.442.8816 preformed.com Email: inquiries@preformed.com© 2020 Preformed Line Products Printed in U.S.A. CO-SS-1032-2 6-20-IH

Specifi cationsCatalog Numbers 80061045

Splice Capacity 1

Adapter Port Quantity (Maximum) 0

Colors White

Cable Entrance Ports (2) Bottom Edge and (1) Back of Base

Size 4.5" W x 5.0" L x 0.87" D (114 x 127 x 22 mm)

COYOTE Fiber Wall Plate Kit ContentsCatalog Number Description

80061045COYOTE Splice & Store Fiber Wall Plate in White – Includes (1) Base, (1) Cover, (1) Blue LITE-GRIP® Rentention Block, (1) Felt Strip, (2) Tie Wraps and (1) Security Screw

COYOTE® Axcess Solutions™ Splice & Store Fiber Wall Plate

Cover

Security Screw CableEntrance Ports

Splice Holder Fiber Routing Channel

Cable Entrance Port

CoverCover

Security ScrewSecurity Screw CableCableEntrance Ports

Splice HolderSplice Holder Fiber Routing ChannelFiber Routing Channel

Cable Entrance PortCable Entrance Port

Cover

Security Screw CableEntrance Ports

Fiber Routing Channel

Cable Entrance Port