A TEREX BRAND
COBRA 230IMPACT CRUSHER
TECHNICAL SPECIFICATION
PLEASE ENSURE YOU ARE USING ADOBE ACROBAT READER TO VIEW THIS DOCUMENT.
https://get.adobe.com/uk/reader/
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 2
OVER
VIEW HOPPER2.6 m3 (3.4 cubic yards) hopper capacityIntegrated pre-screen for
fines removalFeeder speed auto regulates based on crusher load
1
ENGINE OPTIONSJohn Deere constant speed 194kW @ 1800rpmVolvo T4F 205kW @ 1800rpm
4
IMPACT CHAMBERInlet opening: 860mm x 610mm (34” x 24”)830mm wide (33”) x 860mm diameter (34”) rotorTwo independent aprons Hydraulic overload protection as standardEase of setting adjustment
2
CONTROL SYSTEMSimple intuitive push button operation
5
PRODUCT CONVEYOR900mm (36”) wide belt3.0m (9’-10”) discharge heightRemovable for maintenance
3
BY-PASS CONVEYOR OPTION500mm (20”) wide2.4m (7’-10”) discharge height
6
2
1
5
6
4
3
250TONNES PER HOUR
(275 US TPH)
UP TO
WIDENINGMATERIAL
PATH
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 3
FEED
ERFully enclosed hopper / feeder to eliminate spillage
Hopper Capacity: 2.6m3 (3.4 cubic yards)
Hopper Width: 2m (6’ 7”)
Loading Height: 2.99m (9’ 10”)
Fabricated from 10mm (3/8”) thick wear resistant steel
Replaceable 10mm (3/8”) wear liners on feeder floor
Proven twin shaft geared vibrator assembly
Feeder speed automatically regulates depending on engine load
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 4
FEED
ERIntegrated Pre-Screen for removal of fines
40mm (1.5”) Punch Plate as standard
Other apertures, Grizzly bars and Blanking Plate available as an option
All 3 options are fully interchangeable
Screen area: 1080 x 810mm (3’ 7” x 2’ 8”)
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 5
CRUS
HER Proven Terex CR004 Impact chamberInlet Opening: 860mm x 610mm (34” x 24”)
Two independent aprons
Optional Tiled Corrugated primary apron available
Variable tip speed 34-41m/s depending on engine configuration. (750-900RPM)
* Please contact the Technical Sales and Applications department if you have any questions on Blowbar selection or Applications.
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 6
CRUS
HER Rotor diameter: 860mm (34”)Rotor width: 830mm (33”)
Overload Protection: Hydraulic
Apron Configuration: Two Independently Operated Aprons
Setting Adjustment: Hydraulic Assist
Max apron setting – Upper: 120mm (4.75”)
Min apron setting - Upper: 40mm (1.5”)
Max apron setting – Lower: 55mm (2.25”)
Min apron setting - Lower: 20mm (0.75”)
Side Liners: 20mm (0.75”) wear resistant plate (500Hb) as standard
Number of Blowbars: 4 (2 High / 2 Low as standard; 4 High Optional)
Blowbar weight: 140Kgs (309lbs)
Blowbar Removal: Horizontally
Max Lump Size*: 400mm3 (16in3) / 700mm (28”) diagonally / 750x450x200mm slab * Depending on the material specification & blow bar spec.
The hydraulic cylinders are pre-loaded to minimise apron bounce & wear on the cylinders. This arrangement also greatly reduces the oversize produced and is Patented GB2455203
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 7
CRUS
HER
Replaceable liners on all sides: 20mm (¾”) in impact zone, 6mm (¼”) at bypass chute
Good clearance from Rotor to Belt: 420mm (16.5”)
Minimal snagging points for rebar / material in recycling applications.
UNDER CRUSHER CHUTE
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 8
PROD
UCT C
ONVE
YOR Belt width: 900mm (36”)
Belt specification: EP500/3, 8+2 (Steel wire breaker ply)
Discharge height: 3m (9’ 10”) Folding head section for transport
Can be lowered whilst running to aid removal of blockages and also to improve service.
Conveyor can be removed as a unit if required. All electrical / hydraulic connections have connection points on chassis.
High specification head drum scraper
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 9
POW
ER U
NIT Fully enclosed power-unit under vibrating feeder
EU / ROW: John Deere 194kW (260Hp) 6068 Constant Speed engine Operating Speed: 1500 / 1800 rpm
Tier 4 Final: Volvo 205kW (275Hp) T4 Final engine Operating Speed: 1500 – 1800rpm variable
Clutch Type: Highly efficient, self adjusting HPTO 12 dry plate clutch with electro hydraulic operation
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 10
POW
ER U
NIT Hydraulic Tank Capacity: 260L (69 US Gallon)
Easy service access with ‘walk in’ ability at rear to access engine dipstick / filters etc.
Hydraulic components grouped together and electrical components grouped together for easy troubleshooting
Hinged cooler pack to improve serviceability access and to aid cleaning
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 11
POW
ER U
NIT
Direct drive via 6 SPC drive belts
Easily adjustable belt back tensioner for easy tensioning and belt replacement
Capacity: 300 Litres (79 US Gallon)
Hinged to aid access to skirting rubber
CRUSHER DRIVE
DIESEL TANK
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 12
ACCE
SS PL
ATFO
RMS Ground level access to power-unit.
RHS chamber access via fold out ladders and handrails.
LHS access via fixed steps beside operators panel
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 13
TRAC
KSHeavy duty bolt on track frames
2 speed motor as standard
Sprocket Centres: 2950mm (9’ 8”)
Shoe Width: 400mm (16”)
Gradeability: 30°
Rear rake angle: 15.5°
Front rake angle: 25°
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 14
CONT
ROLS
Intuitive ‘push button’ Control System
The Main control panel uses a Printed Circuit Board (PCB) solution to improved reliability.
MACHINE START-UP CAN BE COMPLETED BY 2 BUTTON PRESSES
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 15
CONT
ROLS
The main operating information screens are navigated by the operating mode selector switch
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 16
Vibrating feeder options• Different Media (Grizzly bars,
Blanking Plate, Punch Plate)• Bolt on protector plates
By-Pass conveyor
Chamber options • Corrugated primary apron• Blowbar options• Blowbar removal tool• Blowbar gantry
Product conveyor options:• Dust covers• Belt weigher
Overband magnet• Single Pole• Twin Pole
Electrical control• Radio remote control• Telemetry
Blowbar storage rack
Plant lighting mast
Hot / Cold climate oils
Dust suppression pumpOPTIO
NS
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 17
VIBRATING FEEDERScreen Media (Punch Plate, Grizzly Bars, Blanking Plate)
Bolt on protector plates
OPTIO
NS
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 18
BY-PASS CONVEYORBelt width: 500mm (20”) wide
Belt specification: EP500/3, 3.5 + 1.5
Discharge height: 2.4m (7’-10”)
Hydraulically folds for transport
OPTIO
NS
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 19
CHAMBERCorrugated primary apron
Blowbar types available are:-• Martensitic• Medium Chrome• High Chrome
• Martensitic / Ceramic• Medium Chrome / Ceramic• High Chrome / Ceramic
Blowbar Options
OPTIO
NS
* Please contact the Technical Sales and Applications department if you have any questions on Blowbar selection or Applications.
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 20
CHAMBERBlowbar Removal Tool Blowbar Gantry
OPTIO
NS
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 21
PRODUCT CONVEYORBeltweigher Dustcovers
OPTIO
NS
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 22
MAGNETSingle Pole and Twin Pole magnets available as an Option
750mm (30”) Belt width
The short distance from the crusher discharge to the magnet reduces risk of rebar snagging and blockagesOP
TIONS
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 23
ELECTRICAL CONTROLRadio Remote Control Telemetry
OPTIO
NS
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 24
OPTIO
NS OTHER OPTIONSBlowbar Storage Rack
Plant lighting Mast
Hot / Cold Climate Oils
Dust suppression pump
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 25
WEI
GHTS
& D
IMEN
SION
S WORKING DIMENSIONSLength: 11.32m (37’ 2”)
Width: 2.43m (8’ 0”)
Height: 3.0m (9’ 10”)
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 26
WEI
GHTS
& D
IMEN
SION
S TRANSPORT DIMENSIONSLength: 9.32m (30’ 7”)
Width: 2.46m (8’ 1”)
Height: 3.0m (9’ 10”)
Weight: 23.6mT (Weight of the constant speed machine with single pole magnet.) Tier 4 machine with single pole magnet is 24 tonnes (52,911lbs)
A TEREX BRAND
TECHNICAL SPECIFICATION
EVOQUIP COBRA 230 IMPACT CRUSHER 27
GALL
ERY &
MED
IA
https://www.youtube.com/watch?v=1r18zp6ESsQ
200 Coalisland Road, Dungannon, Co. Tyrone, BT714DRTel: +442887718500 Email: [email protected]
terex.com/EvoQuip
The material in this document is for information only and is subject to change without notice.Terex assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein.Due to continual product development we reserve the right to change specifications without notice. Photographs are for illustrative purposes only, some or all of the machines in the illustrations may be fitted with optional extras.Copyright 2017 Terex GB Limited. Published and Printed in July 2017.
OVERVIEWHOPPER 1HOPPER 2CRUSHER 1CRUSHER 2CRUSHER 4PRODUCT CONVEYORPOWER UNIT 1POWER UNIT 2POWER UNIT 3ACCESS PLATFORMSTRACKSCONTROLS 1CONTROLS 2OPTIONS MAINWEIGHT 1WEIGHT 2GALLERYOPTIONS_VIBRATING FEEDEROPTIONS_BYPASS CONVEYOROPTIONS_CHAMBEROPTIONS_CHAMBER 2OPTIONS_PRODUCT CONVEYOROPTIONS_MAGNETOPTIONS_ELECTRICAL CONTROLOPTIONS_OTHER
Button 66: Button 74: Button 2: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 1: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 4: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 5: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 6: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 13: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 8: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 14: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 9: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 10: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 11: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 50: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 51: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 52: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 54: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 55: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 57: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 59: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 60: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 61: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 63: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 64: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Button 65: Page 2: Page 31: Page 42: Page 53: Page 64: Page 75: Page 86: Page 97: Page 108: Page 119: Page 1210: Page 1311: Page 1412: Page 1513: Page 1614: Page 1715: Page 1816: Page 1917: Page 2018: Page 2119: Page 2220: Page 2321: Page 2422: Page 2523: Page 2624: Page 2725:
Menu Information 2: Button 96: Button 99: Button 100: Button 101: Button 102: Button 97: Button 78: Button 79: Button 258: Button 210: Button 211: Button 212: Button 103: Button 1016: Button 1017: Button 213: Button 214: Button 215: Button 216: Button 218: Button 104: Button 105: Button 106: Button 219: Button 220: Button 221: Button 259: Button 222: Button 224: Button 1013: Button 1014: Button 1015: Button 225: Button 226: Button 227: Button 260: Button 228: Button 230: Button 1018: Button 1019: Button 1020: Button 231: Button 232: Button 233: Button 261: Button 234: Button 236: Button 107: Button 108: Button 109: Button 237: Button 238: Button 239: Button 262: Button 240: Button 242: Button 1010: Button 1011: Button 1012: Button 243: Button 244: Button 245: Button 263: Button 246: Button 248: Button 1021: Button 1022: Button 1023: Button 249: Button 250: Button 251: Button 264: Button 252: Button 254: Button 1024: Button 1025: Button 1026: Button 255: Button 256: Button 257: Button 265: Button 15: Button 16: Button 17: