Code 9: Female Splined 35-2-16 DIN 5480Code 3: Female Splined 28 UNI 221
DIMENSIONS METRIC VERSION
SHAFT OPTIONSSTANDARD
Code 8: Parallel Keyed
STANDARDSHAFT OPTIONS
A1Mount
A2Mount
MOTOR END VIEW
Code 7: Male Splined 35-2-16 DIN 5480Code 1: Male Splined 28 UNI 221
MOTOR END VIEW
Code 28a: 1 1/4”Straight Short
Code 2: Tapered Key
Code 8a: Parallel Keyed
Code 7: Male Splined 35-2-16 DIN 5480Code 1: Male Splined 28 UNI 221
Code 9: Female Splined 35-2-16 DIN 5480Code 3: Female Splined 28 UNI 221
Code 8: Parallel Keyed
Code 28a: 1 1/4”Straight Short
Code 2: Tapered Key
Code 8a: Parallel Keyed
Code 58: 1 1/4” Straight Long
The graphs indicate the typical performance
characteristics of the 250 motor operating
with mineral oil with viscosity
40 cSt at 50°C.
PERFORMANCE
Code 28: 1 1/4” Straight ShortCode 67: 1 1/4” Splined Long Code 68: 1 1/2” Straight Long
95%
94%
92%90%
MECHANICAL EFFICIENCY IDLING AND BOOST PRESSURE
VOLUME EFFICIENCY
Code 17: 1 1/4” Splined Short
SAE “C”OUTPUT END VIEW
MOTOR END VIEW
STARTING AND LOW SPEED TORQUE
A3 Mount
DIMENSIONS SAE VERSION
Option Bearing See Order Code Line 6
The graphs indicatethe typical performance
characteristics of the 250 motor operating
with mineral based oilwith viscosity
40 cSt at 50 C.o
FS15 A3 Mount Weight = 76 lbs.