Code Reader 2

User manual Table of Contents

1. Setup. 2. Main operations. 3. Database. 4. PIN Calculator. 5. Transponder Catalogue. 6. EEprom Calculator. 7. Special Functions. 8. Transponder Programming.

1

1. Setup. Insert USB security key into your PC. Connect Code Reader-2 to your PC via data cable. Turn ON the Code Reader-2. Place security card on over the hole of device and keep it there while login will accepted. Start the software. Choose COM port, language and press “Transmission test” button on “Setup” page. If transmission will be establish you see device information in “Software”, “Hardware”, “Serial number” windows. If you see the window “Transmission error” check COM port choice and power supply.

2. Main operations. Place transponder or key near the device hole. Press “Identify and read” button for identification and reading any transponders and keys.

Then you will see transponders information.

2

Code Reader-2 can identify and read following types of transponders:

11 Temic 12 Temic 13 Megamos 14 Megamos 15 Megamos 20 T5 33 Phillips 40 Phillips Crypto 41 Phillips Crypto 42 Phillips Crypto 44 Phillips Crypto 45 Phillips Crypto 46 Phillips Crypto 2 48 Megamos Crypto 4C Texas

3

60 Texas Crypto

4

61 Texas Crypto 62 Texas Crypto 63 Texas Crypto 64 Texas Crypto 65 Texas Crypto 67 Texas Crypto 68 Texas Crypto 73 Multiblock 8C Temic 8E Sokymat Crypto

For make copy mark the type ot transponder where you would like to copy the original one, place new transponder near the device hole and then press “Write” button. Keep new transponder near the device coil (hole) while the process will be finished. If you have read Phillips Crypto transponder you can see red letters “WR” and “Write” button will be active. It means you can copy it directly into other transponder. With Code Reader-2 you can copy following Phillips Crypto transponders:

- ID 41, - some of ID 40 Opel/GM (T9 type), - ID 42 VAG, - some of ID 44 VAG (not LCK), - ID 45 Peugeot/Citroen. You can copy all those transponders into precoded PCF7935 transponders called “UNI” transponders.

Code Reader-2 can identify, read and copy following types of transponders:

Type of transponder Identify and Read Copy In which transponder 11 Temic + + T5, TK5550/51/54/57 12 Temic + + T5, TK5550/51/54/57 13 Megamos + + T5, TK5550/51/54/57 33 Phillips + + T5, PCF7930/31/35 40 Phillips Crypto + + 44 uni (Т9 only) 41 Phillips Crypto + + 44 uni 42 Phillips Crypto + + 44 uni 44 Phillips Crypto + + 44 uni (not LCK) 45 Phillips Crypto + + 44 uni 46 Phillips Crypto + - - 48 Megamos Crypto + - - 4С Texas + + EH1, EH2, TPX1/2 60 Texas Crypto + + EH2, TPX2 61 Texas Crypto + + EH2, TPX2 62 Texas Crypto + + EH2, TPX2 63 Texas Crypto + + EH2, TPX2 64 Texas Crypto + + EH2, TPX2 65 Texas Crypto + + EH2, TPX2 67 Texas Crypto + + EH2, TPX2

68 Texas Crypto + + EH2, TPX2 + Available - Not available 3. Database. You can save all information in Database after reading.

4. PIN Calculator. With “PIN Calculator” you can calculate 6-digits login for KIA and Hyundai from last 6 digits of VIN.

5

5. Catalogue. There is transponders catalogue with lookup function inside the Code Reader-2 software.

6. EEprom Calculator. You can get PIN codes and prepare transponders for start the car or for programming into the car with diagnostic equipment. Load EEprom of the immo microcontroller to the software for it.

6

7

his software version supports following immobilizers and microcontrollers:

N Vehicle IMMO Type sponders ding ing

T

TranID

PIN coderea

Transponder programm

1 Fiat, Alfa, Lancia mos + Ready ng

BSI Marelli HC912/9s12

48 MegaCrypto

for programmi

2 Fiat, oen, , Delfi mos + Ready ng

CitrPeugeot

Code-293c56

48 MegaCrypto

for programmi

3 Fiat, Alfa, Lancia lfi mos to

+ Ready BSI De93c66

48 MegaCryp

for programming

4 Opel/ GM

40 + Ready for start Immo2, Siemens, TMS370

5 VW, Seat 42 + Ready for start Immo2 Siemens, TMS370

6 VW, Seat Valeo 44 + Ready for start Immo324c04

7 geot

Delfi 93c46 13 Megamos - Ready for start Fiat, Lancia, Citroen, Peu

8 Alfa, Iveco 33 - Ready for start Code1, Bosch

9 Honda, Acura Megamos egamos 13 M - Ready for start 10 Honda, Rover Valeo 33 - Ready for start 11 Fiat, Lancia 11 Temic - Ready for start Marelli

001.01 12 Fiat, Lancia 11 Temic - Ready for start Marelli

110.01 13 Sprinter, Vito Temic 12 Temic - Ready for start 14 VW, Skoda, Seat 33 + Ready for start Immo1

Siemens 15 Renault Valeo 93c46 33 + Ready for start 16 Renault, Dacia 93c46 eady for start Sagem 33 + R17 Renault

s 46 + UCH

Siemen93c66

18 BMW EWS 33 - Ready for start 19 Toyota orolla 12060 4C - Ready for start C

1998-99 89780-93c66

20 Toyota orolla enso 4C - Ready for start C2000-02

ECU D93c56

21 Toyota Corolla osch 4C - Ready for start ECU B24c02

22 Toyota Yaris ECU 93c56 4C - Ready for start 23 Toyota Corona Immo 24c04 eady for start 4C - R24 Renault Laguna 2 ЦКБ 46 + 25 Iveco Immo 93c56 46 + 26 Renault Megan 2 ЦКБ 46 + 27 Alfa Bosch 44 - Ready for start Code2

93c56 28 Mitsubishi 3c56 Bosch 9 44 - Ready for start 29 Volvo 44 - Ready for start Immo3

Bosch

93c56/66 30 Peugeot, Citroen Valeo 93c46 33 - Ready for start 31 Mitsubishi Lancer 24c01 4C - Ready for start 32 Daihatsu Immo 93lc66 4C - Ready for start 33 Audi Delfi 93c46 13 - Ready for start 34 Nissan, Subaru

s 33 - Ready for start Immo

Siemen35 Sprinter, Vito Temic 12 - Ready for start 36 Opel/GM

s 33 + Ready for start Immo1

Siemen37 Mitsubishi

ic 44 - Ready for start Bosch

Cartron93c46

38 Peugeot

33 - Ready for start Fiat, Lancia, Citroen,

Texton 95040

39 Mazda Temic 12 - Ready for start 40 Peugeot 206 mens BSI Sie 45 + 41 Renault 33 - Ready for start Immo

Siemens 42 93c66, 93c86 13 - Ready for start Mercedes

Atego/Actros 43 Toyota Yaris eady for start Bosch 95080 4C - R44 Renault agem

93c66 46 + UCH S

7. Special functions.

ou can use IMMO EEprom information for calculation of transponder data:

13

-Phillips 33 Renault, Nissan, VW

Y -Temic 11 -Temic 12 -Megamos -Texas 4C

8

There are two function more in this window: unlocking of Megamos 48 Crypto and programming of master transponder for Mercedes Benz C, E and G classes.

9. Programmer. Code Reader 2 can prepare some types of transponders which you can program into the car with diagnostic devices.

Kind of transponders Type of transponders Using transponder

Fixed

12 Temic Fiat T5 13 Megamos T5 13 Megamos VDO T5 33 Phillips Siemens Opel T5, PCF7930/31/35 33 Phillips VW T5, PCF7930/31/35 33 Phillips Bosch Fiat T5, PCF7930/31/35 33 Phillips Peugeot/Citroen CPH Texton T5, PCF7930/31/35 33 Phillips Peugeot/Citroen Valeo T5, PCF7930/31/35 33 Phillips Nissan T5, PCF7930/31/35 73 Phillips Multiblock Mitsubishi/Volvo PCF7930/31/35

Phillips Crypto

40 Opel PCF7935 41 Nissan PCF7935 42 VAG PCF7935 44 VAG PCF7935 44 Mitsubishi/Volvo PCF7935 45 Peugeot PCF7935

Phillips 46 Crypto-2

Audi A8 2003-2006 PCF7936 BMW E60 PCF7936 BMW E64 PCF7936 BMW E65 PCF7936 BMW E87 PCF7936

9

Citroen C3 2000-2004 PCF7936 Citroen Picasso 2000-2004 PCF7936 Chevrolet PCF7936 Chrysler PCF7936 Mitsubishi PCF7936 Nissan PCF7936 Peugeot PCF7936 Porsche PCF7936 Renault PCF7936 Touareg PCF7936 Phaeton PCF7936

Texas Crypto

ID 61 Texas DST ID60 ID 62 Texas DST ID60 ID 63 EHS2 ID 64 EHS2 ID 65 Texas DST ID60 ID 67 EHS2, TPX2 ID 68 EHS2, TPX2

You can work with dump of some types of transponders: PCF7930/31/35:

10

T5:

Megamos 48 Crypto:

11

Phillips 46 Crypto 2:

12

Texas 4D Crypto:

10. Texas Crypto software installation. For correct operation of Texas Decryption function you need to use PC with 512 Mb and over RAM and over than 35 Gb free space. For installation press “Setup” button and choose the directory. Then press “Start” button.

13