2
COLD EGR VALVE AND EGR BYPASS VALVE HIGH PERFORMANCE - COMPAC T DESIGN Advanced Mechatronics It‘s that easy
COLD EGR VALVE ANDEGR BYPASS VALVE HIGH PERFORMANCE - COMPAC T DESIGN
AdvancedMechatronicsIt‘s that easy
Integrated radial actuator
Smart option: CAN (J1939), PWM,
analog control
Best in class performance
Suitable for hot/corrosive environments,
including exhaust gas
Industry best response times
Hardware enabled sleep/wake modes
Active or passive radial actuation The AVENTICS best in class cold EGR valve and EGR bypass valve features a weight optimized actuator for high torque applications in narrow spaces. It is suitable for highly corrosive environments.
A wide range of Best in Class features Additional characteristics
Cold EGR valve
AVENTICS Corporation1953 Mercer Road, Lexington, KY 40511 www.aventics.com/us [email protected] F-CEGR/2017-09 Subject to change. Printed in USA. © AVENTICS Corporation. This document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS. It may not be reproduced or given to third parties without its consent.
W Multiple control signals and mounting configurations
W BLDC or PMDC motor options
W Various connector options (integrated or flying lead)
W Non-contact position sensor option
W On board diagnostics option
W E1 compliant
W Robust sealing
W Leak proof IP69K
Series Cold EGR valve
Bore sizes 30mm to 60mm
Temp. range, operational -40°C to +150°C
Temp. range, storage -55°C to +175°C
CAN ready 250kB, 500kB, 1MB
Opertional voltage 12V or 24V
Vibration to 27grms
Response times T90 < 100ms TS < 120ms
W Compact, space-saving design
W Integrated radial actuator
W Low pressure drop
W Broad operating temperature range
W Response time
