20
Product Brochure Colibri II, Electric Pen Drive and Air Pen Drive Small Bone Cutting Tools
| Date post: | 15-Mar-2018 |
| Category: |
Documents |
| Upload: | vuongthien |
| View: | 292 times |
| Download: | 7 times |
Product Brochure
Colibri II, Electric Pen Drive and Air Pen Drive
Small Bone Cutting Tools
Li-Ion
1 DePuy Synthes Small Bone Cutting Tools Product Brochure
Colibri IIThe combination of ergonomic design and high power for Small Bone and Sports Medicine surgeries.• High system modularity for more fl exibility in the operating room• Intuitive design allowing easy handling and time saving during surgery• Designed with particular focus on ergonomics and balance for high
precision and working comfort
Electric Pen Drive (EPD)The EPD platform offers high speed and precision for maxillofacialand extremity surgeries.• One electric-driven pen for drilling, burring, sawing, screwing
and k-wires setting applications• Comprehensive portfolio of cutting tools designed to
facilitate surgical procedures• Foot pedal and hand switch options for more comfort during surgery
Air Pen Drive (APD)The APD platform offers high speed and precision for maxillofacialand extremity surgeries.• One air-driven pen for drilling, burring, sawing, screwing
and k-wires setting applications• Comprehensive portfolio of cutting tools designed to
facilitate surgical procedures• Foot pedal and hand switch options for more comfort during surgery
THE SMALL BONE CUTTING TOOLS ARE TAILORED TO THE FOLLOWING POWER TOOLS:
Small Bone Cutting Tools Product Brochure DePuy Synthes 1
SMALL BONE CUTTING TOOLSA comprehensive portfolio covering a wide range of applications:
Sagittal Saw Blades• Available with fi ne teeth for precise cuts and smooth blade guidance
and with coarse teeth for higher cutting performance
Parallel Saw Blades• The design enables precise parallel cuts in shortening osteotomies• Various cutting angles (45° or 90°) and shortening widths available
Oscillating Saw Blades• Oscillating blades for crescentic osteotomies • Crescentic and 105° angled saw blades available
Large Oscillating Saw Blades• Designed for the Tibia Plateau Leveling Osteotomy
(TPLO) procedure• Compatible with TPLO systems
Reciprocating Saw Blades• Comprehensive range of standard and application specifi c saw blades
Rasps and Broaches• Straight and cross grinded rasps for rasping bone and broaches
for intramedullary reaming
Burrs and Drill Bits• Wide range of stainless steel, carbide or diamond-coated burrs
For more information please consult the IFU Synthes Cutting Tools 60121204.
(see page 4)
(see page 8)
(see page 9)
(see page 10)
(see page 11–12)
(see page 13)
(see page 14–19)
1 DePuy Synthes Small Bone Cutting Tools Product Brochure
For Colibri II
532.021 Oscillating Saw Attachment
Note: Sagittal Saw Blades are available sterile or nonsterile. To order nonsterile saw blades, use the article number from the tables below without “S”.
SAGITTAL SAW BLADES
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
532.041S 15.0 6.0 0.4
532.042S 15.0 10.0 0.4
532.043S 15.0 16.0 0.4
532.044S 18.0 4.0 0.4
532.045S 22.0 8.0 0.4
532.046S 22.0 12.0 0.4
532.047S 31.0 6.0 0.4
532.048S 31.0 10.0 0.4
FINE TEETH
Small Bone Cutting Tools Product Brochure DePuy Synthes 1
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
532.061S 27.0 6.0 0.6
532.062S 27.0 10.0 0.6
532.063S 27.0 14.0 0.6
532.064S 50.0 10.0 0.6
532.065S 50.0 14.0 0.6
532.066S 50.0 20.0 0.6
532.067S 50.0 27.0 0.6
COARSE TEETH
1 DePuy Synthes Small Bone Cutting Tools Product Brochure
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
03.000.314S 18.0 2.5 0.38
03.000.300S 18.0 4.0 0.38
03.000.301S 15.0 6.0 0.38
03.000.302S 31.0 6.0 0.38
03.000.303S 22.0 8.0 0.38
FINE TEETH
Sagittal Saw Blades
For EPD and APD
05.001.039 Sagittal Saw Attachment
05.001.183 Sagittal Saw Attachment, centred
05.001.182 Sagittal Saw Attachment, 90°
Note: Sagittal Saw Blades are only available sterile.
Small Bone Cutting Tools Product Brochure DePuy Synthes 1
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
03.000.304S 15.0 10.0 0.38
03.000.305S 31.0 10.0 0.38
03.000.306S 22.0 12.0 0.38
03.000.307S 15.0 16.0 0.38
FINE TEETH
Article No.
Usable length [mm]
Blade width (mm)
Cut thickness (mm)
03.000.308S 27.0 6.0 0.6
03.000.309S 27.0 10.0 0.6
03.000.310S 27.0 14.0 0.6
03.000.315S 43.0 20.0 0.6
COARSE TEETH
1 DePuy Synthes Small Bone Cutting Tools Product Brochure
PARALLEL SAW BLADES
Article No. Shortening Cut
532.081S 2.0 90˚
532.082S 2.5 90˚
532.083S 3.0 90˚
532.084S 4.0 90˚
532.085S 5.0 90˚
532.091S 2.0 45˚
532.092S 2.5 45˚
532.093S 3.0 45˚
532.094S 4.0 45˚
532.095S 5.0 45˚
For Colibri II
532.021 Oscillating Saw Attachment
Note: Parallel Saw Blades are only available sterile and for single use.
FINE TEETH
70 mm
Small Bone Cutting Tools Product Brochure DePuy Synthes 1
OSCILLATING SAW BLADESFor Colibri II, EPD, APD
532.023 Oscillating Saw Attachment II for Colibri II
05.001.038 Oscillating Saw Attachment, for EPD and APD
05.001.121 Guide for Kirschner Wire, for Oscillating Saw, for EPD and APD
Note: Oscillating Saw Blades are only available sterile.
Crescentic Saw Blades
Usable length[mm]
Blade width (mm)
Cut thick ness (mm)
Diameter (mm)
03.000.311S 26.5 13.3 0.6 18.0
03.000.312S 25.0 16.3 0.6 22.0
03.000.313S 30.0 17.9 0.6 18.0
03.000.316S 30.0 21.9 0.6 22.0
105° Angled Blades intraoral
Usable length[mm]
Blade width (mm)
Cut thickness (mm)
Usable shank length (mm)
03.000.340S 7.0 11.5 0.38 70
03.000.341S 12.0 11.5 0.38 70
03.000.342S 12.0 9.5 0.38 70
03.000.343S 12.0 4.5 0.38 70
10 DePuy Synthes Small Bone Cutting Tools Product Brochure
LARGE OSCILLATING SAW BLADES For Colibri II
532.026 Large Oscillating Saw Attachment
532.027 Spare Key, for No. 532.026 and 511.802
Note: Large Oscillating Saw Blades are only available nonsterile.
Article No. Radius
Usable length (mm)
Cut thickness (mm)
03.000.390 12.0 45.0 0.6
03.000.391 15.0 45.0 0.6
03.000.392 18.0 45.0 0.6
03.000.393 21.0 45.0 0.6
03.000.394 24.0 45.0 0.6
03.000.395 27.0 50.0 0.6
03.000.396 30.0 50.0 0.6
Small Bone Cutting Tools Product Brochure DePuy Synthes 11
RECIPROCATING SAW BLADESFor EPD and APD
05.001.040 Reciprocating Saw Attachment
Note: Reciprocating Saw Blades are only available sterile.
Reciprocating Saw Blades
Usable length [mm]
Blade height (mm)
Cut thickness (mm)
03.000.320S 13.0 6.4/2.9 0.6
03.000.321S 20.0 6.4/2.9 0.6
03.000.322S 7.0 4.0 0.6
03.000.323S 14.0 6.4 0.6
03.000.324S 13.5 4.0 0.6
03.000.325S 25.0 5.5 0.6
03.000.326S 27.0 6.4 0.6
03.000.327S 27.0 6.4/2.9 0.6
03.000.328S 33.5 6.4 0.6
03.000.329S 34.5 5.0/2.5 0.6
03.000.330S 33.5 6.4 0.6
03.000.331S 33.5 6.4 0.6
03.000.332S 33.5 6.4 0.6
11 DePuy Synthes Small Bone Cutting Tools Product Brochure
Elongated Reciprocating Saw Blades
Cutting edge length [mm]
Blade height (mm)
Cut thickness (mm)
Design, special application
03.000.334S 20.0 6.4/2.9 0.6 LeFort IOsteotomy,Rhinoplasty
03.000.335S 27.0 6.4/2.9 0.6 LeFort IOsteotomy,Rhinoplasty
Thin Reciprocating Saw Blades
Cutting edge length [mm]
Blade height (mm)
Cut thickness (mm)
Design, special application
03.000.336S 13.0 3.2 0.4 Intra-dental
03.000.337S 20.0 3.2 0.4 Intra-dental
I.B.O. Saw Blades
Cutting edge length [mm]
Blade height (mm)
Cut thickness (mm)
Design, special application
03.000.338S
9.2 7.4 0.5 Left-BSSO
03.000.339S 9.2 7.4 0.5 Right-BSSO
Reciprocating Saw Blades
Small Bone Cutting Tools Product Brochure DePuy Synthes 11
RASPS AND BROACHESFor EPD and APD
05.001.040 Reciprocating Saw Attachment
Note: Rasps and Broaches are only available sterile.
Rasps
Usable length [mm]
Rasp height (mm)
Cut thickness (mm)
Design, special application
03.000.360S 11.0 5.0 – Cross- grinding,for Rhinoplasty
03.000.361S 14.0 7.0 – Cross- grinding,for Rhinoplasty
03.000.362S 11.0 5.0 – Straight- grinding, for Rhinoplasty
03.000.363S 14.0 7.0 – Straight- grinding, for Rhinoplasty
Broaches
Usable length [mm]
Broach height (mm)
Cut thickness (mm)
Design, special application
03.000.364S 19.0 4.5 4.5 Interpha langealjoint replace-ment, proximal
03.000.365S 16.0 6.0 6.0 Interpha langealjoint replacement, distal
11 DePuy Synthes Small Bone Cutting Tools Product Brochure
BURRS AND DRILL BITSFor Colibri II, EPD, APD
05.001.187 Burr Attachment, for Colibri II
Burr Attachments, for EPD and APD05.001.045 Size S, length 43 mm 05.001.046 Size M, length 68 mm 05.001.047 Size L, length 93 mm
Burr Attachments, angled, for EPD and APD05.001.048 Size S, length 66 mm 05.001.049 Size M, length 91 mm 05.001.050 Size L, length 116 mm 05.001.063 Size XL, length 186 mm 05.001.055 Size XXL, length 333 mm
Note: Burrs are only available sterile.
Important:• The Burr Attachment for Colibri II (05.001.187)
can only be used with burrs of size M and L. Burrs of size S cannot be used with these systems.
• When using the Burr Attachments for EPD and APD, the size of the attachment must correspond to the size of the burr (e.g. attachment size S with burr size S) or to one size bigger (e.g. attachment size S with burr size M).
• The Burr Attachments, angled, for EPD and APD size XL (05.001.063) and XXL (05.001.055), must be used with burrs of size L.
• The marking on the burr (letters A to E) indicates the recommended speed for the respective burr. These markings can be used when working with the EPD using the speed adjustment feature of the console. For further information, refer to the chapter Speed Regulation in the IFU of the EPD (036.000.800 / DSEM/PWT/0914/0025).
Points of measurement
2
Small Bone Cutting Tools Product Brochure DePuy Synthes 11
Round burrs 03.000.XXXS
Diameter (mm) Size S Size M Size L Marking
1.0 000 001 002 A
1.5 003 004 005 B
2.0 230 231 232 B
2.5 006 007 008 C
3.0 009 010 011 C
4.0 012 013 014 D
5.0 015 016 017 D
6.5 018 019 020 E
8.0 021 022 023 E
Round burrs diamondcoated 03.000.XXXS
Diameter (mm) Size S Size M Size L Marking
1.0 030 031 032 A
1.5 033 034 035 B
2.0 036 037 038 B
2.5 039 040 041 C
3.0 042 043 044 C
3.5 045 046 047 D
4.0 048 049 050 D
5.0 051 052 053 D
6.0 054 055 056 D
2
2
2
11 DePuy Synthes Small Bone Cutting Tools Product Brochure
Acorn burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
5.0 6.7 233 234 235 D
6.0 8.0 060 061 – D
9.0 11.4 – 067 – E
Eggshaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.0 8.0 070 071 072 D
5.5 10.0 073 074 075 D
Pearshaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.0 6.9 236 237 238 D
5.0 8.3 076 077 078 D
6.0 9.7 – 080 – D
Barrelshaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.0 9.0 – 240 241 D
5.0 10.0 – 083 084 D
Fissure burrs, tapered Carbide 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.0–1.6 4.5 085 086 087 A
1.6–2.3 5.2 088 089 090 B
2.1–2.6 6.8 091 092 – B
Fissure burrs, cylindrical Carbide 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.6 4.3 094 095 – B
3.0 16.0 – 098 – C
Drum burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
4.7 7.9 – – 247 D
6.0 7.9 – – 105 D
Circular burrs diamondcoated 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
25.0 0.7 109 110 111 E
Burrs and Drill Bits
Small Bone Cutting Tools Product Brochure DePuy Synthes 11
Lindemann reamers 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.8–2.3 20.2 112 113 114 D
Swanson burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
2.0 6.3 115 116 – B
3.0 9.7 118 119 – C
4.0 12.7 – 122 – D
Pinshaped burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.1–1.4 6.0 – 128 – A
1.5–2.1 12.0 – 131 – B
Neuro burrs 03.000.XXXS
Diameter (mm)
Head length (mm)
Size S
Size M
Size L Marking
1.7 2.3 – 134 – B
2.2 3.7 – 137 138 C
2.9 3.8 – 140 141 C
Drill bits 03.000.XXXS
Diameter (mm)
Length of cutting flutes (mm)
Size S
Size M
Size L Marking
1.0 12.0 – 143 – A
1.1 12.0 – 145 – A
1.3 12.0 – 147 – A
1.5 12.0 148 149 – B
2.0 12.0 150 151 – B
2.5 12.0 152 – C
Wire pass drills03.000.XXXS
Diameter (mm)
Length of cutting flutes (mm)
Size S
Size M
Size L Marking
1.1 5.0 154 155 – A
1.5 7.0 156 157 – B
2.0 7.0 – 159 – B
11 DePuy Synthes Small Bone Cutting Tools Product Brochure
BURRS FOR CRANIOTOME ATTACHMENTFor EPD and APD
05.001.059 Craniotome Attachment 05.001.051 Dura Guard Size S 05.001.052 Dura Guard Size M 05.001.053 Dura Guard Size L
Note: Burrs are only available sterile.
Cranial burrs 03.000.XXXS
Diameter (mm)
Usable Head Length (mm)
Dura Guard Size S
Dura Guard Size M
Dura Guard Size L Marking
1.2–1.8 11.0 124 – – A
1.3–2.2 16.0 – 125 – B
1.7–3.0 25.0 – – 126 B
Round burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
3.0 3.0 170 171 Mini-Quick
5.0 5.0 – 172 Mini-Quick
Eggshaped burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
7.0 11.0 173 174 Mini-Quick
8.0 4.8 – 176 Mini-Quick
Pearshaped burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
5.0 8.3 184 185 Mini-Quick
6.0 9.7 – 188 Mini-Quick
BURRS WITH MINI QUICK AND J-LATCH COUPLINGFor EPD and APD Note: Burrs are only available sterile.
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.37103.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
03.000.370
03.000.383
03.000.382
03.000.381
03.000.380
03.000.379
03.000.378
03.000.377
03.000.376
03.000.375
03.000.374
03.000.373
03.000.384
03.000.372
03.000.371
Small Bone Cutting Tools Product Brochure DePuy Synthes 11
DRILL BITS WITH STOPFor EPD and APD
Drill Attachment, 90°05.001.035 short 05.001.036 long
Note: Drill Bits with Stop are available sterile or nonsterile. To order nonsterile articles, use the article number from the tables below without “S”.
Conical burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
5.0 8.3 178 179 Mini-Quick
6.0 9.7 181 182 Mini-Quick
Fissure burrs, tapered 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
1.0–2.1 11.3 189 190 Mini Quick
1.6–3.2 12.0 191 192 Mini Quick
Circular burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length (45 mm) Coupling Type
15.0 1.0 196 – Mini Quick
Lindenmann burrs 03.000.XXXS
Diameter (mm)
Head Length (mm)
Overall Length (28 mm)
Overall Length(53 mm) Coupling Type
2.0–2.3 35.0 – 197 Mini Quick
Drill Bits with StopDiameter (mm)
Usable Length (mm) Coupling Type
03.000.384S 1.0 18.0 Mini Quick
03.000.376S 1.1 18.0 Mini Quick
03.000.377S 1.5 6.0 Mini Quick
03.000.379S 1.5 18.0 Mini Quick
03.000.383S 2.0 18.0 Mini Quick
0123
Synthes GmbHEimattstrasse 34436 OberdorfSwitzerlandTel: +41 61 965 61 11Fax: +41 61 965 66 00www.depuysynthes.com This publication is not intended for distribution in the USA. ©
DeP
uy S
ynth
es P
ower
Too
ls, a
div
isio
n of
Syn
thes
Gm
bH. 2
017.
A
ll rig
hts
rese
rved
. D
SE
M/P
WT
/101
4/00
44(1
) 01
/17
