Compatible with most Fantasy Flight Games®Living Card Games®:
Call of Cthulhu: The Card Game®, A Game of Thrones: The Card Game® (1st and 2nd ed.), Warhammer: Invasion®, The Lord of the Rings: The Card Game®, Star Wars: The Card Game®, Warhammer 40,000: Conquest ®,
Arkham Horror: The Card Game®, Legend of the Five Rings: The Card Game®
Collectors’s Card Crate
Assembly Guide
This box organizer is compatible with FFG™ LCG™ listed above.This product is not licensed, and is up for change at any time in thefuture.
2
Use an exacto knife to cut the bits connecting the parts to the frame.
Remove the parts from the frame with a rotating motion along the axis formed by the bits you just cut.
Use the exacto knife to remove any of the remaining connection bits.
Always dry-fit the parts to together without any glue to make sure you are assembling the correct parts.
Use a drop of glue along the joints and hold it in place until the glue has sufficiently dried.
Use wood glue for assembly.Always dry fit the parts first to make sure the components are correct ones. If you encounter any issues, please contact us at [email protected] or our Facebook page at facebook.com/laseroxinserts
3
Part numbersWe use the following codes to refer to individual parts in our assembly guide:
4
Outer Box
Separators
Required parts: A1, B1, D1, D2
Required parts: F1, G1
D2D2
D2
B1
B1
A1
A1
D1
D1
G1
F1
You may use the G1 separators as they are, or combine them with part F1 to create a compartment for the mini sized cards.
5
C1, C2, C3, C4, C5, E1, E2Inner Box
E1
C2
C4
C3
E2
E2
C5
C1
You may add more C5 separators as needed
6
Assembling the boxes
7
Compatible with Evolution®
Magnetic Card Holder Boxes
Compatible with Trickerion®
Darwin’s Coffer
MagneBox
Trickster’s Trunk
Check out our other Boxes and Inserts!
8
Compatible with Imperial Settlers®
Locomotive and Pirate designs
Compatible with Terra Mystica®
Settler’s Sortiment
Dice Tower
TerrArranger
Check out our other Boxes and Inserts!