User manual 21PT5221Color Television
Recycling Directive – To minimise harm to the environment, the batteries supplied
with the TV set do not contain mercury or nickel cadmium. If possible, when
disposing of batteries, use recycling means available to you. Your TV set uses materials which
are reusable or which can be recycled. To minimise the amount of waste in the environment,
specialist companies recover used sets for dismantling and collection of reusable materials
(contact your dealer).
TABLE OF CONTENTS
Introduction
Safety Information/Useful Tips .................................................................................................. 3
Before Calling Service ................................................................................................................. 4
Basic Installation/Functions
Hooking Up Your TV (Basic Connection) ............................................................................... 5
Use/Care of remote Control .................................................................................................... 5
Connecting the Audio/Video Sockets (Playback) .................................................................. 6
Connecting the Audio/Video Sockets (Recording) ............................................................... 7
Functions of Remote Control ................................................................................................... 8
Functions of TV Controls ...........................................................................................................10
TV Installation
Selecting the Menu Language...................................................................................................... 11
Automatic Tuning of Channels .................................................................................................. 12
Manual Tuning of Channels ......................................................................................................... 13
Selecting the Colour/Sound System ........................................................................................ 14
Fine Tuning Of Channels ............................................................................................................. 16
Editing of Channels........................................................................................................................ 17
Features
Adjusting the TV Picture ............................................................................................................. 18
Adjusting the TV Sound .............................................................................................................. 19
Using the Screen Format ............................................................................................................ 20
Activating the Signal Strength .................................................................................................... 21
Using the Active Control ........................................................................................................... 22Smart Picture Control .................................................................................................................23
Smart Sound Control....................................................................................................................24
Personal Zapping ...........................................................................................................................25
Teletext ........................................................................................................................................... 26
General
Specifications...................................................................................................................................28
SAFETY INFORMATION AND USEFUL TIPS
Safety Information
• Disconnect mains plug when :– the red light below the TV screen is flashing continuously.– a bright white line is displayed across the screen.– cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois
leather or soft cloth.– there is a lightning storm.– the set is left unattended for a prolonged period of time.
• No naked flame sources, such as lighted candles, should be placed on top of the TV orin the vicinity.
• Do not place your TV set under direct sunlight or heat.
• Leave at least 5 cm around each side of TV set to allow for proper ventilation.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rainor water.
• No objects filled with liquids should be placed on top the TV so as to avoid drippingor splashing of liquids on the set.
Useful Tips
• Do not leave your set on standby mode for a prolonged period of time. Switch off setto allow it to be demagnetised. A demagnetised set supports good picture quality.
• Do not shift or move the set around when it is switched on. Uneveness in colour insome parts of the screen may occur.
• Never attempt to repair a defective TV yourself. Always consult a skilled servicepersonnel.
3
BEFORE CALLING SERVICE
Below is a list of frequently occurred symptoms. Before you call for service, make these simplechecks. Some of these symptoms can easily be rectified if you know what to do.
Symptom What you should do
Colour patch • Switch off the TV by the mains power button. Wait for 20(uneveness) minutes before switching on again.
• Check the TV is not placed too near speakers or magneticobjects.
No power • Check the TV’s AC power cord is plugged into the mainssocket. If there is still no power, disconnect plug. Wait for60 seconds and re-insert plug. Switch on the TV again.
No picture • Check the antenna connection at the rear of the TV.• Possible TV station problem. Try another channel.
Good picture • Try increasing the volume.but no sound • Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
Good sound but poor • Try increasing the contrast and brightness setting.colour or no picture
Snowish picture and • Check antenna connection at the rear of the TV.noise
Horizontal dotted lines • Possible electrical interference e.g. hairdryer, vacuumcleaner, etc. Switch off appliances.
Double images or • Possible poor positioning of antenna. Using a highly “Ghost” images directional antenna may improve reception.
TV not responding to • Check life span of batteries of remote control handset.remote control handset • Aim remote control handset directly at remote control
sensor lens on the TV.
4
Antenna Connection• Connect the aerial plug to the antenna socket ¬¬¬¬¬
on the backcover.
• Insert the mains plug into the wall socket.
Mains Connection• For correct mains voltage, refer to type sticker at
the rear of the TV set
• Consult your dealer if mains supply is different.Note : This diagram is not representative of theactual plug and socket.
Switching on the Set• Press the main power button to switch on/
off the TV.• If the set is on standby (indicator is red),
press the Power button on the remotecontrol to switch on set.
HOOKING UP YOUR TV (BASIC CONNECTION)
USE/CARE OF REMOTE CONTROL
• Insert the correct type of batteries into thecompartment.
• Ensure the batteries are placed in the rightdirection.
5
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO
and VIDEO INPUT sockets on the rear of the TV.
– Connect the VIDEO and A UDIO IN sockets on the rear of the TV to the A UDIO and
VIDEO OUT sockets on the VCR.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
AV sockets on
the rear of TV
ANTENNA
OUT
IN
OUT
IN
AUDIO RLVIDEO
IN
OUT
L
R
VIDEO
AUDIO
AV1in
AV2in
Monitorout
VCR (Equipped withVideo and AudioOutput sockets)
Back of VCR
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO
and VIDEO INPUT sockets on the rear of the TV.
– Connect the VIDEO and A UDIO IN sockets on the rear of the TV to the A UDIO and
VIDEO OUT sockets on the VCR.
AV sockets on
the rear of TV
ANTENNA
OUT
IN
OUT
IN
AUDIO RLVIDEO
IN
OUT
L
R
VIDEO
AUDIO
AV1in
AV2in
Monitorout
VCR (Equipped withVideo and AudioOutput sockets)
Back of VCR
6
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)Connection for recording from the TV channel
– Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUTsockets on the rear of the TV.
– To enhance the sound of your TV, connect the AUDIO L and R sockets to an external audio
system instead of the VCR. For mono equipment, connect only the AUDIO L socket.
Connection for recording from one VCR to another VCR
– Connect the sockets of the VCR which you wish to record from, to the corresponding
sockets at either AV1 or AV2– Connect the sockets of the receiving VCR to the MONITOR OUTPUT sockets on the
rear of the TV.
ANTENNA
OUT
IN
OUT
IN
AUDIO RLVIDEO
IN
OUT
L
R
VIDEO
AUDIO
AV1in
AV2in
Monitorout
VCR (Equippedwith Video andAudio Inputsockets)
Back of VCR
AV sockets on
the rear of TV
VCR 1 VCR 2
ANTENNA
OUT
IN
OUT
IN
AUDIO RLVIDEO
IN
OUT
L
R
VIDEO
AUDIO
AV1in
AV2in
Monitorout
ANTENNA
OUT
IN
OUT
IN
AUDIO RLVIDEO
IN
OUT
AV sockets on
the rear of TV
Back of VCR
VCR (Equipped with Video and Audio Input sockets)
7
& Power button– Switch set off temporarily to standby mode.
(The red light indicator lights up when the setis on standby mode).
– To switch on set from standby mode, pressChannel +/– , Digit (0 -9) or Power button.
é Colour buttons– In teletext mode, the colour buttons allow you to
access directly an item or corresponding pages.– As Personal Zapping buttons, you can surf up to
10 personal channels for each button. For detaileddescription of functions, refer to section on“Personal Zapping ”.
“ Teletext buttonsAllows you to access teletext information. Fordetailed description of functions, refer to sectionon “Using the Teletext”
‘ Smiley buttonAllows to add and store your personal preferencechannels in your Personal Preference list. For detaileddescription of functions, refer to section on “Using yourPersonal Zapping feature”.
( Timer ButtonNot applicable.
§ Smart Sound ButtonPress the Smart Sound button repeatedly to access 4different types of sound settings and choose your desiredsetting.
è Menu ButtonDisplays the main menu. Also exits menu from screen.
! Cursor Up ButtonAllows you to select the next item on the menu.
ç Cursor Left ButtonAllows you to select the sub-menus and adjust the settings.
0 Volume + / – ButtonIncreases or decreases volume.
1 44444Allows you to switch from Stereo to Mono sound duringstereo transmission or to choose between language5orlanguage6during dual sound transmission (Selected models only).
2 A/CH(Alternate channel) ButtonAllows you to change between the currentchannel and the previous channel.
FUNCTIONS OF REMOTE CONTROL
&
“
(§
ç
0
‘
1
é
2
!è
8
FUNCTIONS OF REMOTE CONTROL
3 Main Index ButtonIn teletext mode, press button to return to themain index page.
4 Frownie buttonAllows to delete stored personal preferencechannels in your Personal Preference list. Fordetailed description of functions, refer to section on“Personal Zapping ”.
5 Smart Picture ButtonPress the Smart Picture button repeatedly to access5 different types of picture settings and chooseyour desired setting.
61Incredible Surround ButtonNot applicable.
71Cursor Right ButtonAllows you to access the sub-menus and adjust thesettings.
8 Cursor Down ButtonAllows you to select the next item on the menu.
9 Channel + / – ButtonsAllows you to select channels in ascending ordescending order.
20 Mute ButtonMutes sound. To restore sound, press button again.
21 Teletext ButtonRefer to section on “Using the Teletext”
22 OSD buttonAllows you to display the current channel number.It also allows to exit menu from the screen aftercontrol adjustments.
23 Digit (0 -9) ButtonsPress to select a channel. For a 2-digit channelnumber, press the first digit and followedimmediately by the second digit.
24 AV ButtonAllows you to select the AV channels.
25 Sleeptimer ButtonAllows you to select a time period after which theset will switch to standby mode automatically.
3456
7
89
2120
22
23
24
25
9
FUNCTIONS OF TV CONTROLS
1 Mains Power button Switch mains power on or off.
2 Standby Light indicator Indicate red light when standby mode is activated.
Remote Sensor Acts as a sensor for activating the controls of the TVwhen remote control handset is aimed at it.
Volume - button Adjust sound volume softer.
5 Adjust sound volume louder.
Programme Select channel in ascending order.
Select channel in descending order.Note
• You can enter the main menu by pressing boththe Volume buttons at the same time.
• Press the Programme or button to select thenext item on the menu.
• Press the Volume button to access thesub-menus and adjust the settings.
Volume + button
Programme button
button
+ or -
+ or -
10
¸
Operating instructions generally explains the operation of the TVset using the buttons on the remote control unless otherwise stated.Please read the following instructions carefully and follow the stepsas shown to familiarise yourself with the installations and all featuresavailable in your set.
Note: When there is no signal input to the TV, you may encounter instability of theon screen display. In this instance, please use the v button on your remotecontrol to select an AV channel.
The Language feature allows you to set the TV’s on-screen menu to be shown in yourdesired language.
SELECTING THE MENU LANGUAGE
Enter main menu.
Select Install.
Enter the Install menu.
Press button repeatedly to cyclethrough the language list andselect the language of your choice.
Exit menu from screen.
Main o✔ Picture π Brightness■ Sound Colour■ Features Contrast■ Install Sharpness
Colour Temp.More...
œ
Main o■ Picture Language■ Sound Auto Store■ Features Manual Store✔ Install π Channel Edit
œ
Install o✔ Language English π■ Auto Store■ Manual store■ Channel Edit
œ
˙
MENU
m
˙
Step Press button Result on screen
11
AUTOMATIC TUNING OF CHANNELS
Automatic tuning of channels allows you to store each programme automatically.
Enter main menu.
Press button repeatedly untilInstall is selected.
Enter install menu.
Select Auto Store.
Start automatic tuning ofchannels.
When tuning is completed,exit menu from screen.
¸
Main o✔ Picture π Brightness■ Sound Colour■ Features Contrast■ Install Sharpness
Colour Temp.More...
œ
Main o■ Picture Language■ Sound Auto Store■ Features Manual Store✔ Install π Channel Edit
œ
Install o✔ Language π English■ Auto Store■ Manual store■ Channel Edit
œ
˙
¸Install o■ Language✔ Auto Store π■ Manual store■ Channel Edit
œ
˙Auto Store■ Channel 1■ TV 142 MHz
♦♦♦♦♦♦♦♦♦♦♦♦♦♦π♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
Install o■ Language✔ Auto Store π■ Manual store■ Channel Edit
œ
MENU
Step Press button Result on screen
12
MANUAL TUNING OF CHANNELS
Manual tuning of channels allows you to select your preferred channel number for everyavailable programme.
MENU
¸
˙
¸
˙
Enter main menu.
Press button repeatedly untilInstall is selected.
Enter install menu.
Press button repeatedly untilManual Store is selected.
Enter manual store menu.
Press button repeatedly untilSearch is selected.
MANUAL TUNING OF
Main o✔ Picture π Brightness■ Sound Colour■ Features Contrast■ Install Sharpness
Colour Temp.More...
œ
Main o■ Picture Language■ Sound Auto Store■ Features Manual Store✔ Install π Channel Edit
œ
Install o✔ Language π English■ Auto Store■ Manual Store■ Channel Edit
œ
Install o■ Language Colour System■ Auto Store Sound System
✔ Manual Store π Search■ Channel Edit Channel
Fine TuneStore
œ
Manual Store o■ Colour System■ Sound System
✔ Search 79 MHz π■ Channel■ Fine Tune■ Store
œ
¸
Step Press button Result on screen
13
CHANNELSMANUAL TUNING OF CHANNELS
¸
Manual Store o■ Colour System■ Sound System■ Search
✔ Channel 2 π■ Fine Tune■ Store
œ
Manual Storeo■ Colour System■ Sound System■ Search■ Channel■ Fine Tune
✔ Store Store?πœ
˙
¸
9
10
11 Manual Storeo■ Colour System■ Sound System■ Search■ Channel■ Fine Tune
✔ Store Storedœ
12
˙
Start manual searching. Searchingstops once a transmitting signal isfound.
Select Channel.
Key in the channel number.
Press button repeatedly untilStore is selected.
Store tuned channel.Note : If you want tocontinue searching foranother transmittingchannel, repeat steps7 to 11.
Exit menu from screen.
Manual Store o■ Colour System■ Sound System
✔ Search 128 MHzπ■ Channel■ Fine Tune■ Store
œ
51 324 6
7 980
m
Step Press button Result on screen
14
SELECTING THE COLOUR/SOUND SYSTEM
This feature allows you to select your desired Colour and Sound system. If Autois selected, the respective colour and sound system will be automatically selected accordingto the transmission system. Note : Select your desired colour and sound system manually ifreception is poor at Auto mode.
Repeat step 1 Colour System is selected.to step 5 as in“Manual Tuningof TV Channels”
Select the desired coloursystem (Auto, PAL,NTSC 3.58, NTSC 4.43or SECAM).
Press button repeatedlyuntil STORE is selected.
Store selected system.
Proceed to select SoundSystem.
Select the desired soundsystem (Auto, BG, I,DK or M.
Press button repeatedlyuntil STORE is selected.
Store selected system.
Exit menu from screen.
Manual Store o
✔ Colour System Auto π■ Sound System■ Search■ Channel■ Fine Tune■ Store
œ
Manual Store o
✔ Colour System PAL π■ Sound System■ Search■ Channel■ Fine Tune■ Store
œ
˝
˙or
¸
˙
˝
Manual Store o■ Colour System
✔ Sound System■ Search■ Channel■ Fine Tune■ Store Stored
œ
9
¸
˙
Manual Store o■ Colour System
✔ Sound System Auto π■ Search■ Channel■ Fine Tune■ Store
œ
Manual Store o■ Colour System
✔ Sound System DK π■ Search■ Channel■ Fine Tune■ Store
œ
or
¸
˙
m
Manual Store o■ Colour System
✔ Sound System■ Search■ Channel■ Fine Tune■ Store Stored
œ
10
11
12
or˚
Step Press button Result on screen
15
FINE TUNING OF CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
Enter main menu.
Press button repeatedly untilInstall is selected.
Enter install menu.
Press button repeatedly untilManual Store is selected.
Enter manual store menu.
Press button repeatedly untilFine Tune is selected.
Fine tune until the best receptionis obtained.
Select Store.
Store last fine-tuned status.
Exit menu from screen.
Main o✔ Picture π Brightness■ Sound Color■ Features Contrast■ Install Sharpness
Colour Temp.More...
œ
Main o■ Picture Language■ Sound Auto Store■ Features Manual Store✔ Install π Channel Edit
œ
¸
˙
¸
˙
¸
˙
¸
˙9
Install o■ Language Colour System■ Auto Store Sound System
✔ Manual Store π Search■ Channel Edit Channel
Fine Tune Store
œ
Manual Storeo■ Colour System■ Sound System■ Search■ Channel✓ Fine Tune p❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘π■ Store
œ
Manual Storeo■ Colour System■ Sound System■ Search■ Channel✓ Fine Tune p❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘π■ Store
œ
Manual Storeo■ Colour System■ Sound System■ Search■ Channel■ Fine Tune
✔ Store Storedœ
10
MENU
m
or˝
Step Press button Result on screen
16
EDITING OF CHANNELS
This feature allows you to skip or edit channels which have bad or weak TV signal or channelsthat you do not watch often. Note : Once a channel is skipped, you cannot have access to it bythe CH (Channel) + or – button. You can only have access to the channel by the Digit (0 -9)buttons.
Main o■ Picture Language■ Sound Auto Store■ Features Manual Store✔ Install π Channel Edit
œ
Install o■ Language Channel■ Auto Store Skipped■ Manual Store
✔ Channel Editπ
œ
Enter main menu.
Press button repeatedly untilInstall is selected.
Enter install menu.
Press button repeatedly untilChannel Edit is selected.
Enter Channel Edit menu.
Key in the channel number to beskipped.
Select Skipped.
Select On to skip channel.
Exit menu from screen.
Channel Edit o
✔ Channel 2 π■ Skipped
œ
9
HOW TO RESTORE SKIPPED CHANNELS
• Repeat Steps 1 to 5 as in”Editing of Channels”.• Key in the channel number to be restored by the
Digit (0 - 9) button.• Select Skipped by the ¸ button.• Select Off to restore channel by the ˙ button.
• Exit menu from screen by the button.
Channel Edit o■ Channel
✔ Skipped Off
œ
MENU
51 324 6
7 980
¸
˙
¸
˙
¸
˙
Step Press button Result on screen
Channel Edit o■ Channel
✔ Skipped On
œ
17
¸
ADJUSTING THE TV PICTURE
The picture menu allows you to make adjustments to the picture.
˙
Display the main menu on screen.
Enter Picture menu.
Select item.
Adjust level or select desiredsetting.
Exit menu from screen.
˝
˙or
Picture menu items Activities
Brightness Increase or decrease brightness level.
Colour Increase or decrease color level.
Contrast Increase or decrease contrast level.
Sharpness Increase or decrease sharpness level to improve detail
in picture.
Colour temperature Choose from 3 settings (Normal, Warm or Cool).
NR (Noise Reduction) Select “On” to reduce “noisy” picture (little dots on
picture) due to weak signal.
Contrast + Select “On” to allow you to optimise the total contrastfor improved picture quality.
˚
or
MENU
m
Step Press button Result on screen
Main ÎPicture Æ BrightnessSound FeaturesInstall
Colour Temp.More...
ï
Main ÎPicture TrebleSound Æ BassFeaturesInstall
ï
Sound ÎTreble Bass Balance
ï
BalanceAVL
AVL
Í ÆÆ79
Colour
SharpnessContrast
18
ADJUSTING THE TV SOUND
The sound menu allows you to make adjustments to the sound.
Display the main menu on screen.
Select Sound menu.
Enter Sound menu.
Select item.
Adjust level or select desiredsetting.
Exit menu from screen.
¸
˙
˝
˙or
˚
or
¸
MENU
Step Press button Result on screen
Main ÎPicture Æ BrightnessSound FeaturesInstall
Colour Temp.More...
ï
Main ÎPicture TrebleSound Æ BassFeaturesInstall
ï
Sound ÎTreble Bass Balance
ï
BalanceAVL
AVL
Í ÆÆ79
Colour
SharpnessContrast
Sound menu items Activities
Treble Increase or decrease high frequency level.
Bass Increase or decrease low frequency level.
Balance Increase or decrease to adjust balance level.
AVL (Auto Volume Leveller) Select On to enable volume to remain at a pre-determined
level should there be a sudden change in volume duringcommercial breaks or channel switching.
19
USING THE SCREEN FORMAT
You can have a choice of two formats for your viewing pleasure, namely : - 4:3 mode and theEXPAND 4:3 mode through the FORMAT menu.
Display the main menu on screen.
Press button repeatedly untilFeatures is selected.
Enter the Features menu.
Press button repeatedly untilFormat is selected.
Press the button repeatedly tocycle through the different formats(4:3 or Expand 4:3) or and selectyour desired format.
Exit menu from screen.
When to use the Screen Formats
4:3 formatSelect the 4:3 format if you want todisplay the 4:3 picture using the fullsurface of the screen.
Expand 4:3 formatSelect the Expand 4:3 format if youwant to expand movie imagesrecorded in the letterbox format.When this format is selected, theblack horizontal bars at the top andbottom are expanded thus fillingup the entire TV screen.
¸
Main o■ Picture Format■ Sound Signal Strength✔ Features π Active Control■ Install
œ
Feature o✔ Format 4:3 π■ Signal strength■ Active Control
œFeatures o✔ Format 4:3 Expandπ■ Signal Strength■ Active control
œ
¸
˙
˙
MENU
➩
➩
➩
Step Press button Result on screen
20
ACTIVATING THE SIGNAL STRENGTH
The Signal Strength feature allows to view the signal strength level when the On option isselected. The signal strength level will be indicated at the bottom of the screen whenever youswitch channel.
Display the main menu on screen.
Press button repeatedly untilSignal Strength is selected.
Press the button to select Onoption to activate the Signal Strengthmode.
¸
Main o■ Picture Format■ Sound Signal Strength✔ Features π Active Control■ Install
œ
Feature o■ Format✔ Signal strength Off■ Active Control
œ
˙
MENU
Step Press button Result on screen
Feature o■ Format✔ Signal strength On■ Active Control
œ
21
USING THE ACTIVE CONTROL
This feature automatically adjust settings for optimal picture quality continuously under anysignal conditions. To activate the Active Control feature, select the “ON” option in the ActiveControl menu.
Display the main menu on screen.
Press button repeatedly untilFeatures is selected.
Enter the Features menu.
Press button repeatedly untilActive control is selected.
Press the button to select On optionto activate Active Control mode.If Display On option is selected, thesettings of Brightness, Contrast,Sharpness, Contrast + andNoise Reduction will be displayedon the screen when the set isswitched on or when you switch toanother channel.
¸
Main o■ Picture Format■ Sound Signal Strength✔ Features π Active Control■ Install
œFeature o■ Format■ Signal strength✔ Active Control Off
œ
¸
˙
˙
MENU
Step Press button Result on screen
Feature o■ Format■ Signal strength✔ Active Control On
œ
22
SMART PICTURE CONTROL
Whether you are watching a movie or video game, your TV has automatic video controlsettings matched to your current program source or content. The Smart Picture feature quicklyresets your TV’s video controls of program for a number of different types of programs andviewing conditions you may have in your home. Each Smart Picture setting is preset at thefactory to automatically adjust the TV’s Brightness, Colour, Picture and Sharpness levels.
Press botton repeatedly to cycle through the 5 settings namely,Personal, DVD/VCD, Rich, Natural and Soft and selectyour desired picture setting.
Exit menu from screen.
Personal
Defintion of Picture Settings
Personal : Picture settings are set to your preference.
DVD/VCD : For optimal picture setting, wheneverthe source is connected to DVD/VCDplayer, select DVD/VCD setting for AVmode.
Rich : Emphasize very vibrant colours. Thissetting is the optimal setting when youare viewing TV programmes in abrightly-lit room.
Natural : Emphasize original colours.
Soft : Emphasize “warm” colours.(Suitable for dimly-lit room condition andgives cinema-like effect when light isswitched off).
DVD/VCD
Rich
Natural
Soft
Step Press button
23
SMART SOUND CONTROL
Whether you are watching a movie or video game, your TV has automatic sound controlsettings matched to your current program source or content. The Smart Sound feature quicklyresets your TV’s sound controls of program for a number of different types of programs andviewing conditions you may have in your home. Each Smart Sound setting is preset at thefactory to automatically adjust the TV’s Treble and Bass levels.
Press botton repeatedly to cycle through the 4 settings namely,Personal, Theatre, Music and Voice and select your desiredsound setting.
Exit menu from screen.
Personal
Definition of Sound Settings
Personal : Sound settings are set to your preference.
Theatre : Emphasize sensation to action.(Bass and Treble boosted)
Music : Emphasize low tone (Bass boosted).
Voice : Emphasize high tone (treble boosted).
Voice
Theatre
Music
Step Press button
24
PERSONAL ZAPPING
A list or series of favourite TV programs can be selected and stored in the 4 coloured buttonswith the Personal Zapping feature. With this feature you can easily viewed up to a total of 10preferred channels for each coloured button.
Adding Channels to the Favourite list
Select a channel by the Digitbuttons
Press button to display list.
Choose your favourite colourbutton to store selected channel.
Repeat steps 1 to 3 to add andstore your avourite channels tothe list.
Exit menu from screen.
To view through the favourite list
8
Deleting Channels from the Favourite list
{ 8
{ 8 {Remove Item?- Press |
8 { Select List!
{ 8 Added!
51 324 6
7 980
Step Press button Result on screen
Press the colour button that youhave selected.
Press button repeatedly to cyclethrough your favourite listand view your favourite channel.
Select a colour button and pressbutton repeatedly to select thechannel you want to delete.
Press button to display list.
Press button to remove item.
Repeat steps 1 to 3 to deletemore channels from list.
Exit menu from screen.
25
USING THE TELETEXT
If a TV channel broadcast contains teletext information, each channel that broadcaststeletext transmits a page (index page) with information on how to use the teletext system,usually on page 100. The system transmitted is indicated in the option line at the bottomof the screen.
& On/Off teletext Press the button once to switch onand Superimpose teletext display. (A channel in whichteletext page teletext is being transmitted must beover TV selected).programme Press the button the second time
superimpose the teletext page overthe TV programme.Press the button the third timeto exit teletext mode.
é Selecting a Key in the required teletext pageteletext page (3 digits). The page number is
displayed at the top left hand cornerof the screen. When the teletextpage is located, the counter stopssearching. If the counter keepssearching, it means that the page isnot available for selection. If youmake a mistake in keying the pagenumber, you have to completekeying the 3-digit number beforere-keying the correct page number.
“ Accessing Press the ˚ button toa teletext display the next page and thepage ¸ button to display the previous
page.
‘ Direct Access to The 4-colour buttons allow you toan item or access directly an item orcorresponding corresponding pages.pages
( Main Index Press the button to return to themain index page.
&
é
“
(
‘
Press button Result on screen
51 324 6
7 980
˚ ¸
26
USING THE TELETEXT
§ Interrupt Press the button to change to TVmode. Press the button again toreturn to teletext mode and to theteletext page.
è Enlarge Press the button once to enlargeand view the top half of the page.Press the button the second timeto enlarge and view the bottomhalf of the page. Press the buttonthe third time to return to normalsize page.
! Hold A selected page sometimescontains a few sub-pages. The sub-page will automatically move to thenext sub-page after about 20seconds. The total number of sub-pages are indicated at the top righthand corner of the screen. Pressthe button once to hold page andthe second time to release holdingof page.
ç Reveal/ Press the button once to revealConceal hidden information (solutions to
puzzles, riddles, etc). Press thebutton the second time to concealinformation.This button is applicable only toteletext page with puzzles, riddles,etc.)
ç!
è§
Press button Result on screen
27
Acr41.pdf 2005-09-08 1:56:22 PMAcr41.pdf 2005-09-08 1:56:22 PM
SPECIFICATIONS
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the
type number at the rear of the set.
21PT5221
Picture tube screen size 550 mm
Picture tube visible area 510 mm
Audio Output :
Speaker 2 x 5 W
TV System PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Playback System NTSC 3.58,
NTSC 4.43, PAL 60
Stereo system AV Stereo
Set Dimensions :
Width 506 mm
Depth 476 mm
Height 466 mm
Net Weight of Set (approximate) 22 kg
28
29
3139 125 36651
Specifications are subject to change withoutnotice.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2004 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
3139 125 37371
Specifications are subject to change withoutnotice.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2004 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com