+ All Categories
Home > Documents > Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Date post: 15-Dec-2015
Category:
Upload: elias-brewer
View: 243 times
Download: 5 times
Share this document with a friend
Popular Tags:
40
Comm-Tac A Low Cost Approach to Interoperability and Digital Migration
Transcript
Page 1: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Comm-Tac

A Low Cost Approach to Interoperability

and Digital

Migration

Page 2: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Comm-Tac Overview

• Comm-Tac is designed to meet a growing demand for a low-cost method of solving tactical interoperability problems

• It meets a challenging need for quick, immediate grouping of dissimilar radios

Page 3: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Comm-Tac Overview

• Provides tactical interoperability on demand or on a permanent, full time basis

• Provides radio grouping at the hardware level, inexpensively and effectively

Page 4: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Front Panel View

Easy push button operation for assigning groups.

Three position buttons set a radio to Group A, Group B, or Off.

Page 5: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

How it Works

UHF Conventional MOTOTRBO™

UHF Conventional

MOTOTRBO™ System

MOTOTRBO™

UHF System

UHF Transmits through the system to MOTOTRBO™ and vice-versa

Page 6: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

How it Works

The Result is UHF Talking to MOTOTRBO™ effectively

UHF Conventional MOTOTRBO™

UHF Conventional MOTOTRBO™

MOTOTRBO™ SystemUHF System

Page 7: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Rear Panel View

4 individual DB-9 connectors for radio interface, fuse and power connector

Page 8: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Powering Comm-Tac

Equipped with a locking connector plug for DC or AC power connections

Page 9: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Connecting Radios

Radio resources are connected via radio termination cables purchased from Trident or made by the dealer

Page 10: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Connecting Radios

In the previous demo diagram, the UHF Radio is connected to Port 1 and the MOTOTRBO™ radio is connected to Port 2

UHF MOTOTRBO™

Page 11: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

4 Resource CapabilityUHF Conventional

MOTOTRBO™

800 MHX Smartnet

VHF PassPort or LTR

Connect up to 4 resources (radios) in any combination of 2 groups

Group A

Group B

Group A

Group B

Page 12: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Or group them all together.

4 Resource CapabilityUHF Conventional

MOTOTRBO™

800 MHX Smartnet

VHF PassPort or LTR

Group A

Group A

Group A

Group A

Page 13: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

LED Indications

The above diagram shows radios 1 and 2 connected as Group A radios 3 and 4 connected as Group B

Page 14: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Making Groups

Simply press the button until the desired grouping is reached. Press once for assigning to Group A. Press twice to assign it to Group B. Press a third time and that resource returns to normal mode (ungrouped).

Page 15: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

More Examples Nexedge VHF Trunking

P25 800 MHzUHF Conventional

Nexedge, P25 and VHF Trunking are grouped together. UHF is not grouped with any other radio and is in normal mode.

Page 16: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Applications

• Can be used at system backbone level or customer level

• Comm-Tac can be used to map talk groups together that do not normally connect

• Connect Trunking to Conventional Platforms

Page 17: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Opportunities

• Public Safety, First Response

• Schools, Universities

• Public Places supporting many different radio users such as Sports Complexes

• Monitoring radio traffic not usually monitored

Page 18: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Vertical Markets

• Construction Companies

• Utility Companies

• Power Companies

• Chemical Plants

• Manufacturing Facilities

• Sensitive Environments

Page 19: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Common UsesUHF Conventional MOTOTRBO™

Neighboring Power Companies can assist each other during outages.

Page 20: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Common UsesUHF Conventional MOTOTRBO™

By using Comm-Tac, assisting power companies can now communicate with the other company when they arrive on scene.

Page 21: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Common Uses

“First Response” agencies can group with utilities during disasters or on a regular basis

Page 22: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Common Uses

Response to facilities where radio communications and coordination are critical, but usually not possible

Page 23: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Technical Overview

• Comm-Tac offers adjustments and “Tuning Pots” under the cover for set-up and alignment

• Not all situations will require adjustments, however, Trident recommends taking appropriate measurements to be sure the Comm-Tac is operating at optimal levels

Page 24: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Set up and Configuration

Alignment, settings and instructions are illustrated in the Installation and Operation Manual

Page 25: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Internal View ofComm-Tac

Dip Switches for set-up

Page 26: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Set-up and Configuration

• Alignments and adjustments such as:– Squelch Settings

• COR

• VOX and sensitivity settings

• Audio Delay:– Adjusted by internal dip switches to support

trunking systems and channel acquisition time

Page 27: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Set Up and Configuration

• Audio Deviation can also be adjusted

• When combining 25 KHz radios with 12.5 KHz or narrow band radios, some alignment may be necessary to balance audio, etc.

Page 28: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Ordering Comm-Tac

• Dealers may order Comm-Tac direct from Trident Micro Systems

• Trident works through resellers and dealers and prefers not to sell direct to end users

Page 29: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

How to Order

• Contact Trident Micro SystemsTwo Trident Dr., Arden, NC 28704(800) 798-7881 *Follow prompts to SalesFax Orders : (828) 684-7874Email orders : [email protected]

Contacts

• Keith Rhodes, National Sales Manager, Ext 1600• Mark Durner, Regional Sales Manager, Ext. 1621• Brian Roberts, Regional Sales Manager, Ext 1620• Angela Gryder, Inside Sales Coordinator, Ext 1601

Page 30: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Part Numbers to Order

• 710-015 Comm-Tac Kit– Includes Comm-Tac Chassis, DC power cord,

Vehicle Mounting Bracket and Installation and Operation Manual

Page 31: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Optional Accessories

• 500-576 : Comm-Tac Power Cable Kit

(Order this cable to plug into AC power source)

* Call Trident for a list of available cables

Page 32: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Warranty and Technical Support

• Trident Provides a one (1) year parts and labor warranty for Comm-Tac . Trident's standard warranty policy applies and is available for telephone technical support if needed.

Page 33: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Technical Support Contact

• Contact Trident Micro SystemsTwo Trident Dr., Arden, NC 28704

(800) 798-7881, Ext 1300

(828) 684-0319

[email protected]

• Access through Trident’s website also offers emergency tech support requests at www.tridentms.com

Page 34: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Comm-Tac Recap

• Connect Dissimilar Trunking Platforms to Newer Digital Technologies

• Connect Conventional Platforms to MOTOTRBO™, Nexedge,P25 and more

• Extremely Easy to Use

Page 35: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

iOPT Commander • Can be used with all iOPT Products• Allows the user to place himself into a

group with other sources• Features:

– Heavy duty microphone– External speaker– Headset jack– Mute button

Page 36: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

iOPT Commander

• Can be used as a single transmit point.• Great for Immediate broadcasts to all

connected sources• Supports headset connections into popular

intercom systems• Manage connections on the fly

Page 37: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

iOPT Commander

Page 38: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

iOPT Commander

Page 39: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

iOPT family of Products

Page 40: Comm-Tac A Low Cost Approach to Interoperability and Digital Migration.

Questionsand

Answers


Recommended