Soc Classification level 3 © Nokia Siemens Networks
NetAct Configurator features
NetAct RAC featuresNetAct Administrator features & toolsConfigurator features
CM Operations Manager
CM Editor CM Analyzer
Soc Classification level 5 © Nokia Siemens Networks
CM Editor
• Editing & browsing through actual and planned configuration data
• Integrated plan management– For all network elements (BSC, RNC,
MSS, MGW etc.)– Parameter mass modification– Advanced search
• Operator can compare between actual and planned parameters while editing
• Find objects that match specified criteria with possibility to set new values only to these objects
Description
Benefits
Soc Classification level 6 © Nokia Siemens Networks
CM EditorObject Navigation Tree
The object navigation tree is available for• Actual configuration• Plans
Soc Classification level 7 © Nokia Siemens Networks
CM EditorNetwork Plans
Plans are populated through• Copy from actual
configuration
Editor features are provided• Copy, paste• Search, replace• Filter
Soc Classification level 8 © Nokia Siemens Networks
CM Operations Manager
• Keep Configurator up-to-date with network– Upload actual configuration
• Efficient plan-based management– Plan provisioning to network– Export actual data and plans– Compare actual with planned data
• Scheduling of operations
• CM Operations Manager – all operations under control
• Comprehensive feedback to all operations
Description
Benefits
Soc Classification level 9 © Nokia Siemens Networks
CM Operations ManagerUpload
Upload uses• MML upload interface from NEs• XML upload interface as soon as
available from NEsUpload granularity• All data of single NE• All data of set of NEs• All data of all NEs• Upload of data subset
Soc Classification level 10 © Nokia Siemens Networks
CM Operations ManagerScheduling of Operations
Scheduling is provided for automation of routine workflowsTime-scheduled execution of operations is possible for all major operations• Upload• Import• Consistency checks• Download• etc.
Execution either once or periodically• E.g. daily, each Wednesday 2 am
Soc Classification level 11 © Nokia Siemens Networks
CM Analyzer
• Consistency checking for– Planned and actual configurations– Parameter values and dependencies
• Possibility to define operator-specific consistency checks
• Scheduled start of consistency checks• Automatic corrections of inconsistencies• Automated reporting that can be sent to
e-mail address
• Detection of planning errors including human errors at an early stage
• Higher quality of network plans
Description
Benefits
Soc Classification level 13 © Nokia Siemens Networks
Command Manager in Configurator CoreNetActTM Configurator
Soc Classification level 14 © Nokia Siemens Networks
Command Manager in a nutshell
DescriptionNetAct
Configurator
CM Operations Manager
Command Manager
Flexi NS
Flexi NG
GGSNSGSN
Packet Core
MSCServer
CDS
Circuit Core
• Data management feature of CM Operations Manager
• Same application for several network technologies
• Enter and execute network element commands (MML, CLI)
• Load and execute command files
• Information about success or failure of command execution
• Display of full NE output• Many value-add features
MGW
Soc Classification level 15 © Nokia Siemens Networks
• Via Tools menu of CM Operations Manager
Start of Command Manager
Soc Classification level 16 © Nokia Siemens Networks
Start page of Command Manager
• "Command Manager" is shown in application title bar
• NE Selection view is displayed
• NE Selection tab is highlighted
• Selected NE type and list of NEs depend on installation
• Display of groups and network elements can be adjusted via Options view
Soc Classification level 17 © Nokia Siemens Networks
Features1. Select NE type2. Select individual NEs3. Select NE groups
– Groups are specific to Command Manager
4. Manage NE groups through import / export of XML files
5. Enter and execute command
6. Load, view and execute command file
7. Command memory8. Interrupt command (file)
execution9. Help
NE Selection view (1/2)
1.
2.
3.4.
5. 6.
8. 9.
7.
Soc Classification level 18 © Nokia Siemens Networks
NE Selection view (2/2)
Selection of NE typeLicenses control whichNE types are availableGGSN - Flexi ISNFING - Flexi NG
Select all NEsDeselect all NEs
NE Selection view can be adjusted individually via Options view
NE GroupsDefinition
File
Soc Classification level 19 © Nokia Siemens Networks
Features1. NE identification2. Executed commands3. Time of command
execution4. Result of command
execution5. Enter and execute
command6. Load, view and execute
command file7. Command memory8. Interrupt command (file)
execution9. Help
Feedback view
1.
2.
3. 4.
5. 6.
8. 9.
7.
Soc Classification level 20 © Nokia Siemens Networks
Features1. Command header2. Executed command3. NE printout4. Find / search, upwards,
downwards, find memory5. Export output to text file6. Enter and execute
command7. Load, view and execute
command file8. Command memory9. Interrupt command (file)
execution10. Help
Output view
1.2.
3.
4.
6. 7.
9. 10.5.
8.
Soc Classification level 21 © Nokia Siemens Networks
Features1. Assign a name and
description to the next execution
– For logging in CM Operations Manager
2. Select processing logic for error situations when executing a command file
3. Schedule command / command file execution
4. Set timeout when NE is not responding
5. Adjust NE selection view6. Memorize NE selection
after closing Command Manager
Options view (1/2)
1.2.
3.4.
6.
7.
9.
5.
8.
Soc Classification level 22 © Nokia Siemens Networks
Features7. Adjust Feedback view and
Output view8. Switch automatically to
Feedback view resp. Output view after command execution
9. Clear the pop-up list next to the command field
Options view (2/2)
1.2.
3.4.
6.
7.
9.
5.
8.
Soc Classification level 23 © Nokia Siemens Networks
Use caseCommand file execution and broadcastingR4 Core task for CM Engineer• Deliver PCM and ET hardware data of MSC Servers MIRA and LAPPI• Task includes
– Creation of command file– Execution of command file with broadcasting– Export of NE printouts to text file
Steps to be executed1. Create command file2. Select NEs in NE Selection view3. Load command file4. View command file5. Execute command file6. Check results in Feedback view7. View NE printouts in Output view8. Export NE printouts to text file
Soc Classification level 24 © Nokia Siemens Networks
• Text editor can be used
Step 1: Create command file
Soc Classification level 25 © Nokia Siemens Networks
• "Broadcasting Mode" is displayed in application title bar upon selection of several NEs
Step 2: Select NEs in NE Selection view
Soc Classification level 26 © Nokia Siemens Networks
• Press button for opening the load file dialog
Step 3: Load command file
Soc Classification level 27 © Nokia Siemens Networks
• Press button for displaying the command file
• Command file can also be modified and saved
Step 4: View command file
Soc Classification level 28 © Nokia Siemens Networks
• Press button for starting command file execution
Step 5: Execute command file (1/3)
Soc Classification level 29 © Nokia Siemens Networks
• Confirm broadcasting of command file
Step 5: Execute command file (2/3)
Soc Classification level 30 © Nokia Siemens Networks
• Progress bar is shown when executing a command file or when broadcasting
• Command file execution can be interrupted by pressing button
Step 5: Execute command file (3/3)
Soc Classification level 31 © Nokia Siemens Networks
• All executed commands are listed
Step 6: Check results in Feedback view
Soc Classification level 32 © Nokia Siemens Networks
• Mark the commands in Feedback view
Step 7: View NE printouts in Output view (1/2)
Soc Classification level 33 © Nokia Siemens Networks
• Select to switch to the Output view
Step 7: View NE printouts in Output view (2/2)
Soc Classification level 34 © Nokia Siemens Networks
Step 8: Export NE printouts to text file (1/3)
• Press button for opening the file selection dialog
• Select folder• Enter the file name• Press button for
closing the file selection dialog
Soc Classification level 35 © Nokia Siemens Networks
Step 8: Export NE printouts to text file (2/3)
• Press button for creating the text file
• Press button for confirming end of export
Soc Classification level 36 © Nokia Siemens Networks
Step 8: Export NE printouts to text file (3/3)
• Display text file with text editor
Soc Classification level 37 © Nokia Siemens Networks
"Efficient help mode”
• Special method which supports a user to enter MML commands in the correct syntax
• User enters only a part of an MML command, gets information about syntax and missing parameters online from the NE and continues with entering remaining parts of the MML command
• Thus, entering of an MML command is done step-by-step in a guided way
Note: "Efficient help mode" is available for R4 Core NEs only
Soc Classification level 38 © Nokia Siemens Networks
Use case for "efficient help mode"Interrogate states of ETsR4 Core task for CM Engineer• Retrieve ET states of MSC Server MIRA
Steps to be executed1. Select NE in NE Selection view2. Switch to Output view3. Enter name of MML command group4. Evaluate NE feedback for retrieving MML name5. Complement name of MML command6. Evaluate NE feedback for retrieving ET parameter7. Provide name of unit type ET8. Evaluate NE feedback for retrieving ET types9. Finalize and execute MML command10. View NE printout about ET states
Soc Classification level 39 © Nokia Siemens Networks
• Distinguished Name of NE is displayed in application title bar
Step 1: Select NE in NE Selection view
Soc Classification level 40 © Nokia Siemens Networks
• Last executed command is displayed
Step 2: Switch to Output view
Soc Classification level 41 © Nokia Siemens Networks
• Enter name of command group (ZUS) followed by "?"
• Press enter• Note: Screenshot shows
previous NE printout in Output window
Step 3: Enter name of MML command group
Soc Classification level 42 © Nokia Siemens Networks
• According to NE feedback, the "I" needs to be used for interrogating states
• Mouse pointer is at right position for continuing with the MML
Step 4: Evaluate NE feedback for retrievingMML name
Soc Classification level 43 © Nokia Siemens Networks
• Enter "I" followed by ":"• Press enter
Step 5: Complement name of MML command
Soc Classification level 44 © Nokia Siemens Networks
• According to NE feedback, the parameter "ET" identifies the unit type ET
• Mouse pointer is at right position for continuing with the MML
Step 6: Evaluate NE feedback for retrieving ET parameter
Soc Classification level 45 © Nokia Siemens Networks
• Enter "ET" followed by ":"• Press enter
Step 7: Provide name of unit type ET
Soc Classification level 46 © Nokia Siemens Networks
• According to NE feedback, the parameter value "BOTH" delivers states of traffic and trial units
• Mouse pointer is at right position for continuing with the MML
Step 8: Evaluate NE feedback for retrieving ET types
Soc Classification level 47 © Nokia Siemens Networks
• Enter "BOTH" followed by ";"
• Press enter• MML command is
completed and executed at NE
Step 9: Finalize and execute MML command
Soc Classification level 48 © Nokia Siemens Networks
• "COMMAND EXECUTED" is displayed in NE printout
• Entry in Feedback view is created (no entries are created for former steps)
• User can continue straight with entering the next command without mouse click
Step 10: View NE printout about ET states
Soc Classification level 49 © Nokia Siemens Networks
Scheduling of command (file) execution (1/2)Scheduling is done in Options view
Soc Classification level 50 © Nokia Siemens Networks
Scheduling of command (file) execution (2/2)
Logging in Feedback view of Command Manager
Logging in Scheduled Operations of CM Operations Manager
Soc Classification level 51 © Nokia Siemens Networks
Command Manager is not case-sensitive
Command entered in small caps Command entered in large caps
Soc Classification level 52 © Nokia Siemens Networks
• Alt+C– Move cursor into the command field
• Alt+N– Move to the NE Selection view
• Alt+F– Move to the Feedback view
• Alt+O– Move to the Output view
• Alt+P– Move to the Options view
• Alt+S– Move cursor into the search field of the Output view
• Alt+X– Activate for scrolling in Output view. Use arrows to scroll the content of
output(s)
Hot Keys in Command Manager