+ All Categories
Home > Documents > CommBiz User Guide - Getting Started in CommBiz€¦ · Before you get started 1. Open your...

CommBiz User Guide - Getting Started in CommBiz€¦ · Before you get started 1. Open your...

Date post: 27-Jun-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
of 7 /7
Important About this guide Before you get started 1. Open your internet browser and go to www.commbiz.com.au. 2. In the righthand menu, select My Security Centre from the Related Information section. 3. The Login screen is displayed. Logging in to My Security Centre This guide shows you how to login and get started when you first begin using CommBiz. You’ll need a letter from the Bank with your CommBiz login ID and a separate letter with your sealed login password. If you are an Administrator or Authoriser, you will also need your CommBiz security token and your NetLock USB device. You need to login within 28 days after we send you your login ID, or your ID will expire. 004-143 310512 Page 1 of 7 Getting Started in Co mm Biz
Transcript

Important

About this guide

Before you get started

1. Open your internet browser and go to www.commbiz.com.au.

2. In the righthand menu, select My Security Centre from the Related Information section.

3. The Login screen is displayed.

Logging in to My Security Centre

This guide shows you how to login and get started when you first begin using CommBiz.

You’ll need a letter from the Bank with your CommBiz login ID and a separate letter with your sealed login password. If you are an Administrator or Authoriser, you will also need your CommBiz security token and your NetLock USB device.

You need to login within 28 days after we send you your login ID, or your ID will expire.

004-

143

3105

12P

age

1 of

7

Getting Started in CommBiz

CommBiz User Guide Getting Started in CommBiz www.commbiz.com.au© Commonwealth Bank of Australia 2007 ABN 48 123 123 124

Page 2 of 7004-143 310512

4. Enter your login ID and password, then click the Log in button.

5. The Change Login Password screen is displayed.

6. Enter your current password, then your new password (and retype your new password as confirmation).

Note: Please ensure that you read and comply with the Login Password requirements.

7. Click the OK button.

Changing your password

CommBiz User Guide Getting Started in CommBiz www.commbiz.com.au© Commonwealth Bank of Australia 2007 ABN 48 123 123 124

Page 3 of 7004-143 310512

8. The first Registration screen is displayed.

9. Type in your contact email address and then click the Next button.

10. The Identity Questions screen is displayed.

11. Select a question from the list provided, type in an answer (minimum 2 characters) and click Add. You need to add 4 questions and answers before the Next button will be enabled.

Providing contact details

Selecting identification questions

Note: These questions will be used to identify you if you forget your password or where additional verification is required.

CommBiz User Guide Getting Started in CommBiz www.commbiz.com.au© Commonwealth Bank of Australia 2007 ABN 48 123 123 124

Page 4 of 7004-143 310512

12. Once you have completed your questions and answers, click the Next button.

13. If you are an Authoriser or Administrator, the Security Token Activation screen will be displayed. If not, you will see the Login ID screen in Step 15 below.

Note: You must activate your Security Token before you activate your NetLock USB device.

14. Type in the 10-digit serial number on the back of your security token, then click the Next button.

15. The Login ID screen is displayed.

Activating your security token

Changing your login ID

CommBiz User Guide Getting Started in CommBiz www.commbiz.com.au© Commonwealth Bank of Australia 2007 ABN 48 123 123 124

Page 5 of 7004-143 310512

16. Type in a new Login ID, then click the Change button.

17. The Registration — Complete screen is displayed.

18. Click the Close Window button.

19. Wait a few minutes for your security details to be updated.

If you are an Administrator or Authoriser, please continue to step 20 to activate your NetLock USB device.

If not, you can now login to CommBiz with your new login ID and password.

Activating your NetLock USB device

20. Insert the NetLock USB device into a USB port.

Note: It may take your computer a few seconds to recognise that the USB device has been inserted.

21. Open Microsoft Windows Explorer by right clicking Start on the bottom left of your screen and selecting Explore or Open Windows Explorer or equivalent option.

Note: Depending on your computer settings, your computer may automatically open Windows Explorer and the USB device. If so, ignore Step 22 and go straight to Step 23.

CommBiz User Guide Getting Started in CommBiz www.commbiz.com.au© Commonwealth Bank of Australia 2007 ABN 48 123 123 124

Page 6 of 7004-143 310512

22. Find and select the NetLock drive in Microsoft Windows Explorer.

23. Double-click the NetLock.exe file.

Note: The drive letter assigned (K: in our example) will vary depending on your computer setup.

Note: The file icon will display the Commonwealth Bank logo. There will also be a folder on the NetLock device named NetLock.

24. If this is not the first time that you have logged in using your NetLock Security device, go to step 26. Once you have accessed the NetLock.exe file, you will be re-directed to My Security Centre. Enter your CommBiz Login ID and Login Password.

CommBiz User Guide Getting Started in CommBiz www.commbiz.com.au© Commonwealth Bank of Australia 2007 ABN 48 123 123 124

Page 7 of 7004-143 310512

25. Enter your NetLock Serial Number and follow the prompts.

26. You will be directed to the NetLock menu page. To log into CommBiz, select CommBiz Login.

27. Log into CommBiz as normal.


Recommended