Alfa-SPK LLC |
RUSSIA
TILES MAKING EQUIPMENT
MANUFACTURING
PREPARED BY
Cyril Krotov | Foreign affairs expert
Tel.: +7 (905) 906-50-60
Email: [email protected]
Alfa-SPK LLC
City of Novokuznetsk, Pushkina St.15
COMMERCIAL
PROPOSAL
RUBBER TILES
MAKING LINES ARFC
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Our company is one of the largest suppliers of industrial equipment in the territory of
the Russian Federation.
About us
Our company – Alfa-SPK – focuses on equipment manufacturing, mainly for two
industries:
recycling of worn-out tires and general mechanical rubber goods with the
purpose of receipt of rubber granules which are also called rubber crumb;
manufacturing of floor coverings and other types of coverings made from
rubber crumb.
Production
Production of rubber tiles and other coverings from a rubber crumb is the
perspective, developing and environmentally friendly type of activity not requiring
development of difficult production technologies.
It should be noted lack of the real competition in the market as at the moment
demand exceeds the offer that speaks well for that, you have today a real opportunity
to be engaged in profitable production, without being afraid of the high competition
and big advertizing costs.
The payback period of the equipment is equal to 6 MONTHS
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Scope
The scope of rubber coverings is rather extensive. It can be used both on the open
spaces, and in rooms.
Arrangement of entrance
areas and ladders
Arrangement of
walking paths
Arrangement of terraces
Arrangement of farms and
stables
Arrangement of
tennis courts
Arrangement of pools
Arrangement of nurseries
and playgrounds
Arrangement of sporting
venues
Arrangement of the house
adjoining territories
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Demand
The demand determinant on a rubber tile and other coverings shows positive growth
already rather long time. Fixed growth is provided with such product characteristics
as:
durability;
simplicity in leaving;
does not change appearance;
resistance to temperature drops;
long useful life (~ 10 years).
Description of a production process
Preparation of raw materials
Preparation of components for mix (rubber crumb, polyurethane binder, coloring
pigmen) in necessary proportions.
Mixture (5 m2)
One of mixers is filled up with the rubber crumb, then coloring pigment is added.
After uniform coloring polyurethane binder is filled in. It is stirred according to
technology.
Formation
The received mix is unloaded from the mixer in forms according to a compounding
and technology.
Pressing
In forms with mix inserts of necessary thickness are located. Forms are put in the
cart. The cart is located under a press. Pressing happens under pressure of 9 tons
(press fitting time ~ 3 minutes).
Drying
The pressed cart is placed in the heating room. Time of drying depends on the
polyurethane binder (from 2 to 6 hours).
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Equipment
Production of rubber coverings and other products on the equipment of our company is
made by method of cold pressing as this method allows receiving the most high-quality
products.
Below you can see the schematical image of mini-plants for production of coverings
from a rubber crumb.
ARFC-MINI ARFC-LIGHT
ARFC-OPTIMAL
ARFC-MASSIVE
Further we suggest you to study characteristics of the equipment for production of
rubber coverings. For your convenience all information is provided in tables.
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Technical characteristics of mini-plant ARFC
ARFC MINI LIGHT OPTIMAL MASSIVE
Production per shift up to 20 m2 up to 40 m
2 up to 60 m
2 up to 100 m
2
Average energy consumption 3 kWh 5 kWh 6 kWh 7 kWh
Room space 20 m2 80 m
2 100 m
2 150 m
2
Personnel 1 person 2 persons 2 - 3 persons 3 - 4 persons
Specification of mini-plant ARFC-MINI
№ Name Unit of Measure Quantity
1 The training materials
pcs. 2
2 Carts for molds*
pcs. 1
3 The mixer for preparation of raw material
pcs. 1
4 Rack for the mixer
pcs. 1
5 The table for formation
pcs. 20
6 Molds
pcs. 2
7 Scales
pcs. 1
8 Tools for work and installation
pcs. 1
9 Technological passport
set 1
10 Molds* for production of sports mats - 1 set.
pcs. 1
The compression mold is the set consisting of a form, a frame, the insert. This set
occupies one of 10 levels in the cart.
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Specification of mini-plant ARFC-LIGHT
№ Name Unit of Measure Quantity
1 The mixer for preparation of raw mix
pcs. 2
2 Heating chamber of 3000Х4000 mm
pcs. 1
3 Press hydraulic with control of pressure PG-9ti
pcs. 1
4 Carts for molds
pcs. 4
5 Temperature control panel
pcs. 1
6 Temperature sensor
pcs. 1
7 Table for the layout
pcs. 1
8 Racks for mixers
pcs. 2
9 Set of molds
pcs. 40
10 Tools for installation
set 1
11 Working tool
set 1
12 Scales
pcs. 2
13 Table for formation
pcs. 1
14 Draught equipment
pcs. 1
15 The technical data sheet, technology and compounding training video records pcs. 1
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Specification of mini-plant ARFC-OPTIMAL
№ Name Unit of Measure Quantity
1 The mixer for preparation of raw mix
pcs. 4
2 Heating chamber of 3000Х4000 mm
pcs. 1
3 Press hydraulic with control of pressure PG-9ti
pcs. 1
4 Carts for molds
pcs. 6
5 Temperature control panel
pcs. 1
6 Temperature sensor
pcs. 1
7 Table for the layout
pcs. 4
8 Racks for mixers
pcs. 4
9 Set of molds
pcs. 60
10 Tools for installation
set 1
11 Working tool
set 1
12 Scales
pcs. 3
13 Table for formation
pcs. 1
14 Draught equipment
pcs. 1
15 The technical data sheet, technology and compounding training video records pcs. 1
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Спецификация мини-завода ARFC-MASSIVE
№ Name Unit of Measure Quantity
1 The mixer for preparation of raw mix
pcs. 6
2 Heating chamber of 3000Х4000 mm
pcs. 1
3 Press hydraulic with control of pressure PG-9ti
pcs. 1
4 Carts for molds
pcs. 10
5 Temperature control panel
pcs. 1
6 Temperature sensor
pcs. 1
7 Table for the layout
pcs. 6
8 Racks for mixers
pcs. 6
9 Set of molds
pcs. 100
10 Tools for installation
set 1
11 Working tool
set 1
12 Scales
pcs. 4
13 Table for formation
pcs. 1
14 Draught equipment
pcs. 1
15 The technical data sheet, technology and compounding training video records pcs. 1
16 Raw materials for training set 1
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
Конкурентные преимущества
В отличие от аналогов и предшественников улучшен процесс размешивания
сырьевой смеси, за счет особой конструкции лопастей.
Гидравлический пресс оснащен специальной системой распределения нагрузок,
что обеспечивает равномерность давления по всей площади давления.
Commercial part
We constantly develop and we work on having opportunity to offer you the best
conditions.
Each line passes continuous test before shipment, therefore we are always confident
in reliability and high quality of the offered equipment.
Warranty
Upon condition of proper use period of guarantee is 12 months from the moment of
commissioning. Also on separate knots and mechanisms the period of guarantee up to
36 months.
Payment terms
2 payments in equal parts:
50% - initial payment for confirmation of the contract;
50% - the second payment after testing of the equipment.
Cost (transportation, installation and trainings are paid separately)
ARFC - MINI_____________________________________________9 280.00 USD
ARFC - LIGHT__________________________________________23 490.00 USD
ARFC - OPTIMAL_______________________________________30 890.00 USD
ARFC – MASSIVE_______________________________________40 449.00 USD
Alfa-SPK | Russia, Novokuznetsk
TILES MAKING EQUIPMENT MANUFACTURING
For more information contact our specialist in any convenient way:
We express you gratitude for the shown interest and trust to our equipment!
Whatsapp:
+79059065060
Phone:
+7(905)906-50-60
E-mail:
All the best personally to you,
Alfa-SPK