S U S T A I N A B I L I T Y S O L U T I O N S
COMMERCIAL CATALOGUE
2019
CONTENTS
1. Introduction 02
2. PV Solar Mounting systems 03
2.1 Aluminium structural rails 04
2.2 Roof brackets 05
2.3 Structural brackets 07
2.4 Splice kit/Joining plate 07
2.5 Panel clamps 07
2.6. Fixing components 08
2.7. Crimping Tool 09
3. PV Solar Panels 10
3.1 315W -330W Seraphim Panel 72 Cell 11
3.2 265W - 280W Seraphim Panel 60 Cell 12
3.3 315W - 325W Eclipse Seraphim Panel 60 Cell 13
4. Inverters 14
4.1 Off Grid / Hybrid 15
4.1.1 Lynx / Axperrt Inverters (Off-Grid) 15
4.1.2 Victron Inverters 16
4.2 Grid Tied Inverters 19
4.2.1 Fronius Primo 19
4.2.2 Fronius Symo & Eco Range 20
4.3 Micro Inverters 21
4.3.1 AP System 21
5. Batteries 22
5.1 SS4037 Advanced Lithium-Ion Battery 22
5.2 SS202 Battery 23
5.3 MSS Smart Storage Solution 24
6. Mypower24 Monitoring System 25
7. Cables 26
8. Connectors 27
8.1 Cable coupler MC4 27
8.2 Branch Connector 27
9. Combiner Box 28
9.1 DC Combiner Box 28
9.2 AC Combiner Box 29
10. Pre-Assembled PV Solar Kit (Back Plate) 30
11. Power Tools 32
13. Contact details 33
01
S U S T A I N A B I L I T Y S O L U T I O N S
INTRODUCTIONEstablished in 2009, Valsa Trading (Pty) Ltd is a South African company, focussed and intent on designing, manufacturing and supplying mounting system solutions as well
as a comprehensive range of solar energy products to the PV Solar Industry on the African continent. The company is recognised as a system integrator and partner of choice
for some of the leading companies operating in the African market.
Nearly 10 years ago, owner-director Svilen Voychev identified a gap in the solar market and started designing, manufacturing and supplying mounting system solutions for a
variety of PV Solar applications including rooftop mounting on metal sheet roofs, corrugated roofs, tiled roofs and mounting solutions for carports, ground and customised applications.
Driven by new leading-edge technologies the company’s vision is to be a leader in the PV Solar Industry, sharing expert knowledge of innovative technologies and providing
quality products aligned to world leaders such Canadian Solar, Seraphim and First Solar that provide energy independence to channel partners, clients and end users.
Today, Valsa provides a comprehensive range of quality solar energy solutions and products including mounting system solutions, solar panels, inverters,
Li-ion batteries, cables, housing and other accessories.
The expansion of Valsa’s product range has been met with enthusiasm from clients across Africa, this together with the provision of world-class products, an extensive African foot print, personal service at competitive pricing has positioned Valsa as
the supplier of choice for all solar solutions and products.
02
PV SOLAR MOUNTING SYSTEMS
Photovoltaic (PV) solar panels offer a green and efficient way to harness power from the sun. The most important part of the photovoltaic installation is the mounting structure solution that holds the PV solar panels in place and fixes the plant to a roof, the ground or a carport. It is the mounting structure solution that provides the perfect tilt angle for the solar panels to optimise energy production through solar irradiation throughout the year.
Valsa specialises in mounting structure solutions, these solutions can either be custom designed to site specifications or the customer’s needs:
• The Roof Mounting Structure provides a solution for the installation of solar panels, as part of the structure of the building, onto all types of roofs found on commercial, industrial, and domestic buildings while maximising the harvesting of photovoltaic power without compromising the integrity of the roof.
• Ground Mounting Structure provides the ideal option for installations on the ground. This quick-install, secure structure for PV Solar panels comes in three different mounting options; concrete slab, concrete strips and pilings.
• The Valsa Solar Carport which has a dual purpose in that it combines the harvesting of photovoltaic power with the need for shade and protection of staff and visitor vehicles. It can also incorporate LED lighting and solar charge stations for electrical vehicles. We offer Galvanized, Aluminium Cantilever and Non-standard Aluminium carport solutions. The size of the desired system and site specification(or conditions) will determine the type of solution.
• The Tensile steel Cable solution is a versatile alternative to the traditional mounting structures. Photovoltaic panels are hooked onto the steel wire ropes with special hooks for a quick and easy installation. Cable height can be adjusted to accommodate obstructions specific to the site.
• Solrif or Integrated PV solar roof
• A new solution called Façade utilises not only the roof, but also all or some of the sides of the building. This improves the harvesting of photovoltaic power while achieving an architecturally and aesthetically pleasing design.
During the design phase of a PV Solar installation various specific technical decisions are made with regards to the system and its components.
For ease of ordering refer to the below:2.1 The Aluminium structural rails 2.2 Roof brackets 2.3 Structural brackets 2.4 Roof clamps 2.5 Splicing Kit/ Joining Plate2.6 Fixing Components2.7 Crimping Tool
03
S U S T A I N A B I L I T Y S O L U T I O N S
STRUCTURAL RAILS
* Any tilt degree can be manufactured on request from customer* for uprights
2.1 ALUMINIUM STRUCTURAL RAILS
Product code Description Extruded Length Dimensions Mass/Length Image
PRO4040TS2S66 2 Slot Top & Side Profile
6.6m 40mm x 40mm x 1.2mm 0.746kg/m
PRO4040TB2S66 2 Slot Top & Bottom Profile
6.6m 40mm x 40mm x 1.2mm 0.756kg/m
PR04040HD3S66 3 Slot Heavy Duty Profile
6.6m 40mm x 40mm x 1.6mm 1.053kg/m
PRO2856RT3S62 Rectangular Profile
6.6m 28mm x 56mm x 1.6mm 1.133kg/m
PROSQTUB6 Square Aluminium Profile
6m 38mm x 38mm x 2mm 0.782kg/m
(A) BRA150LU0845 (B) BRA150SU0131 BRA150SU0198 BRA150SU0270 BRA150SU0362 BRA150SU0440 BRA150SU0511 BRA150SU0612
(A) Single Upright* configuration for mounting /tilting PV systems
(B) Lengths are determined when module inclination, ranging from 5° to 45°
40mm x 40mm x 845mm 40mm x 40mm x 131mm 40mm x 40mm x 198mm 40mm x 40mm x 270mm 40mm x 40mm x 362mm 40mm x 40mm x 440mm 40mm x 40mm x 511mm 40mm x 40mm x 612mm
0.660 0.102 0.149 0.211 0.282 0.344 0.399 0.477
(A) BRA250LU1200 (B) BRA250SU0200 BRA250SU0300 BRA250SU0380 BRA250SU0520 BRA250SU0640 BRA250SU0748 BRA250SU0895
(A) Single Upright* configuration for mounting /tilting PV systems
(B) Lengths are determined when module inclination, ranging from 5° to 45°
40mm x 40mm x 1200mm 40mm x 40mm x 200mm 40mm x 40mm x 300mm 40mm x 40mm x 380mm 40mm x 40mm x 520mm 40mm x 40mm x 640mm 40mm x 40mm x 748mm 40mm x 40mm x 895mm
0.938 0.156 0.235 0.297 0.407 0.500 0.579 0.696
(A) BRA300LU1600 (B) BRA300SU0125 BRA300SU0250 BRA300SU0380 BRA300SU0515 BRA300SU0690 BRA300SU0850 BRA300SU0988 BRA300SU1186
(A) Single Upright* configuration for mounting /tilting PV systems
(B) Lengths are determined when module inclination, ranging from 5° to 45°
40mm x 40mm x 1600mm 40mm x 40mm x 125mm 40mm x 40mm x 250mm 40mm x 40mm x 380mm 40mm x 40mm x 515mm 40mm x 40mm x 690mm 40mm x 40mm x 850mm 40mm x 40mm x 958mm 40mm x 40mm x 1186mm
1.251 0.094 0.196 0.297 0.399 0.540 0.665 0.749 0.923
PROUNI5500 PROUNI6_0
Unistrut Slotted Profile
5.5m 6.0m
40mm x 40mm x 0.5mm 40mm x 40mm x 0.5mm
0.959kg/m
04
S U S T A I N A B I L I T Y S O L U T I O N S
2.2 ROOF BRACKETS
Product code Description Roof Type Material Mass Bracket
BRADOMSTDGS BRADOMBTMGS
Domestic Tile Roof Bracket In Land Standard Fix or Bottom Fix
Galvanised Steel 0.472kg
BRADOMSTDSS BRADOMBTMSS
Domestic Tile Roof Bracket Coastal Standard Fix or Bottom Fix
Stainless Steel / Hot Dipped Galvanized Steel
0.472kg
BRAIBRACR IBR Roof Bracket (across the rib)
Aluminium Alloy 6063 T6 Class/Type-21
0.096kg
BRAIBRALG IBR Roof Bracket (along the rib)
Aluminium Alloy 6063 T6 Class/Type-21
0.096kg
BRALCOR FSTM8RVNT
Corrugated
L-Bracket Comes complete with foam gasket
Aluminium Alloy 6063 T6 Class/Type-21
0.053kg
BRACRG-C FSTM8RVNT
Corrugated
C-Bracket Comes complete with foam gasket
Aluminium Alloy 6063 T6 Class/Type-21
0.075kg
FSTM10HNGRDT250 FSTM12HNGRDT300
Slate Tile Roof Bracket Double Thread Screw-Hanger Bolt M10/250mm or M12/300mm
Stainless Steel 0.485kg
FSTM10HNGRDT250 FSTM12HNGRDT300
Asbestos roof - Hangerbolt solution available for wood substructure
Aluminium Alloy 6063 T6 Class/Type-21
0.045kg
BRALCOR
FSTSDS5X80SS
Corrugated L-Bracket comes complete with foam gasket for metal substructure
Stainless Steel 0.485kg
05
ROOF BRACKETSS U S T A I N A B I L I T Y S O L U T I O N S
2.2 ROOF BRACKETS CONT.
Product code Description Roof Type Material Mass Bracket
BRALSTD BRALLNG FSTM8RVNT
Nu Rib / Widedek Roof
Standard L-Bracket
Long L-Bracket
Aluminium Alloy 6063 T6 Class/Type-21
0.045kg
BRALSTD FSTM8RVNT
Harvey Tile Roof Bracket
Standard L-Bracket
Long L-Bracket
Aluminium Alloy 6063 T6 Class/Type - 21
0.045kg
BRABRWBSLOT BRABRWBSTUD
Brown-built Roof Bracket
With Slot or Stud
No Penetration
Aluminium Alloy 6063 T6 Class/Type-21
0.278kg
BRAKLLKSLOT BRAKLLKSTUD
Klip-Lok Roof Bracket with Slot or Stud
Aluminium Alloy 6063 T6 Class/Type-21
0.315kg
BRAZIPTKSLT Ziptek Roof Bracket
Aluminium Alloy 6063 T6 Class/Type-21
0.190kg
BRASAFKRLESS BRASAFKSLOT BRASAFKSTUD
Saflok Roof Bracket with Slot, Stud or Railless option available
Aluminium Alloy 6063 T6 Class/Type-21
0.315kg
BRANOV440L Novotexi Roof Bracket
Mac Steel Roof Sheeting
Comes complete with foam gasket
Galvanised Steel 0.177kg
BRACRFT Craft Lock Roof Bracket Set
Aluminium Alloy 6063 T6 Class/Type-21
0.115kg
06
S U S T A I N A B I L I T Y S O L U T I O N S
2.5 PANEL CLAMPS
Product code Description Material Mass Image
BRAMC40U Middle Clamp (U-Bracket) used for supporting panels in the middle 50mm x 2mm
Aluminium Alloy 6063 T6 Class/Type-21
0.0263kg
BRAEC40Z End Clamp (Z-Bracket)used for supporting panels at the end 50mm
Aluminium Alloy 6063 T6 Class/Type-21
0.0233kg
BRAMCGL_100x58** BRAMCGL_130x58**
Middle Clamp for Glass Panels
Rubber Thickness 5.8mm
60 Cell Panel = 100mm /
72 Cell Panel = 130mm
Aluminium Alloy 6063 T6 Class/Type-21
0.147kg /0.201kg
BRAECGL_100x58 ** BRAECGL_130x58**
End Clamp for Glass Panels
Rubber Thickness 5.8mm
60 Cell Panel = 100mm /
72 Cell Panel = 130mm
Aluminium Alloy 6063 T6 Class/Type-21
0.114kg /0.155kg
UNIPWRSNP Power Snaps used with Unistut Profiles 20 x 40 x 45mm
Galvanized Steel 0.032kg
07
2.3 STRUCTURAL BRACKETS
Product code Description Material Dimensions Mass Image
BRALSTD Standard L-Bracket
used for fixing aluminium railing to the roof
Aluminium Alloy 6063 T6 Class/ Type-21
40 x 60 x 5mm 0.045kg
BRALLNG Long L-Bracket
used for fixing aluminium railing to the roof
Aluminium Alloy 6063 T6 Class/ Type-21
40 x 80 x 5mm 0.052kg
2.4 SPLICE KIT / JOINING PLATE
Product code Description Material Dimensions Mass Image
BRAFPJ Flat Plate Joiner used for joining aluminium railing
Aluminium Alloy 6063 T6 Class/ Type-21
100 x 40 x 5mm 0.043kg
Product Code Description Components Dimensions Mass
PROSPLCKT Splice Kit 2 x Flat Plate 4 x M8 Bolt 4 x M8 Hex Nut 4 x M8 Spring Washer 4 x M8 Flat Washer
100 x 40 x 5mm 0.181kg
S U S T A I N A B I L I T Y S O L U T I O N S
** Bolts and nuts not included
2.6 FIXING COMPONENTS
Product Code Description Size Length Material Image
FSTM8BLT20SS FSTM8BLT55SS
Bolt Std Size M8
Additional sizes available*
Std 20mm & 55mm Additional sizes available
Stainless Steel* * Galvanized steel available on request
FSTM8CPS20 FSTM8CPS25 FSTM8CPS30 FSTM8CPS35 FSTM8CPS40 FSTM8CPS45 FSTM8CPS50 FSTM8CPS60 FSTM8CPS80
Cap Screw Std Size M8 Additional sizes available*
20mm / 25mm / 30mm / 35mm / 40mm / 45mm / 50mm / 60mm / 80mm
Stainless Steel
FSTM6HXTK50 Hex Tek Screw Type 17
Std Size 5.5 Std 50mm Zink Plated
FSTSDS5X80SS Self-Drilling Screw
Std Size 5
Additional sizes available*
Std length 80mm
Stainless Steel
FSTST14X22 Stitching Screws Std Size 14mm Std 22mm Galvanized Steel Class 3
FSTM8FLATSS Flat Washer Std Size M8 Additional sizes available*
Std Size Stainless Steel / Galvanized Steel
FSTM8SPRINGSS Spring Washer Std Size M8 Additional sizes available*
Std Size Stainless Steel / Galvanized
FSTM8FNDWSS Fender Washer Std Size M8 Additional sizes available*
25mm
Additional size available
Stainless Steel / Galvanized Steel
FSTM8HNA4SS Hex Nuts Std Size M8 Additional sizes available*
Std Size Stainless Steel / Galvanized Steel
08* All sizes available upon request
S U S T A I N A B I L I T Y S O L U T I O N S
2.6 FIXING COMPONENTS CONT.
Product Code Description Size Length Material Image
FSTM8RVNT Riv Nuts Std Size M8 Additional sizes available*
Std Size Yellow Zink Plated
FSTM8SQNUTA4 Square Nuts Std Size M8
Additional sizes available*
Std Size Stainless Steel
FSTM8SHNUTSS FSTM8SHNUTGS
Shear Nuts Std Size M8
Additional sizes available*
Std Size Stainless Steel / Galvanized Steel
FSTM8SPRGNUT Spring Nuts Std Size M8 Std 40mm Galvanized Steel
FSTTHBARM8STS FSTTHBARM8GS
Threaded Bar Std Size M8
Additional sizes available* *Various lengths can be manufactured
Std 1m Additional lengths available
Stainless Steel / Galvanized Steel
2.7 CRIMPING TOOL
Product Code Description Sizes Image
RIVNUTCRMPR Manual Riv Nut Tool Crimper Nozzle sizes M3 – M10 available
09
S U S T A I N A B I L I T Y S O L U T I O N S
* All sizes available upon request
PV SOLAR PANELS
Valsa offers a range of Polycrystaline panels designed for both Grid Tie and off Grid applications. The Polycrystaline panels are constructed, utilizing the highest quality matarials and are CE certified according to the IEC61215-1995 standards. All panels supplied by Valsa are covered by a 25-year limited warranty and are expected to last in excess of 30 years. For specialized applications, Valsa can supply Monocrystaline, Thin film and Bifacial technologies
For ease of ordering refer to the below for:
3.1 315W - 330W Seraphim Panel 72 Cell3.2 265W - 280W Seraphim Panel 60 cell3.3 315W - 325W Eclipse Seraphim Panel 60 cell
10
S U S T A I N A B I L I T Y S O L U T I O N S
11
Power Tolerance
Power Tolerance (W) (0,+4.99)
Maximum System Voltage (V) 1000 (TÜV)
Maximum Series Fuse Rating (A) 15
Temperature Characteristics
Pmax Temperature Coefficient -0.41 %/°C
Voc Temperature Coefficient -0.32 %/°C
Isc Temperature Coefficient +0.05 %/°C
Operating Temperature -40 ~ +85°C
Nominal Operating Cell Temperature (NOCT) 45 ± 2°C
Mechanical Specifications
External Dimensions 1956 x 992 x 40 mm
Weight 23 kg
Solar Cells Polycrystalline 156.75 x 156.75 mm (72pcs)
Front Glass 3.2 mm tempered glass, low iron,
Frame Anodized aluminium alloy
Junxion Box IP67
Output Cables 4.0 m2 cable length: 1100mm
Connector MC4 Compatible
Mechanical Load 5400 Pa
3.1 315W - 330W SERAPHIM PANEL 72 CELL
Electrical Characteristics (STC)
Module Type SRP-320-6PA SRP-325-6PA SRP-330-6PA
Maximum Power STC - Pmp (W) 320 325 330
Open Circuit Voltage - Voc (V) 45.50 45.7 45.9
Short Circuit Current - Isc (A) 8.96 9.03 9.12
Maximum Power Voltage - Vmp (V) 37.00 37.3 37.5
Maximum Power Current - Imp (A) 8.65 8.72 8.8
Module Efficiency STC - nm (%) 16.49 16.75 17.01
STC: Irradiance 1000 W/m2 module temperature 25°C AM=1.5; Power measurement tolerance: +/-3%Electrical Characteristics (NOCT)
Module Type SRP-320-6PA SRP-325-6PA SRP-330-6PA
Maximum Power NOCT - Pmp (W) 236 240 244
Open Circuit Voltage - Voc (V) 42.00 42.2 42.4
Short Circuit Current - Isc (A) 7.24 7.3 7.37
Maximum Power Voltage - Vmp (V) 34.60 34.8 35
Maximum Power Current - Imp (A) 6.83 6.89 6.98
NOCT: Irradiance 800 W/m2 ambient temperature 20°C wind speed: 1m/s; Power measurement tolerance: +/-3%
Valsa Product Code PV320WSRP-6PA PV325WSRP-6PA PV330WSRP SRP-6PA SERIES 6 INCH 72 CELLS
315-330w
S U S T A I N A B I L I T Y S O L U T I O N S
12
Electrical Characteristics (STC)
Module Type SRP-275-6PB
Maximum Power STC - Pmp (W) 275
Open Circuit Voltage - Voc (V) 38.80
Short Circuit Current - Isc (A) 9.02
Maximum Power Voltage - Vmp (V) 31.60
Maximum Power Current - Imp (A) 8.71
Module Efficiency STC - nm (%) 16.90
STC: Irradiance 1000 W/m2 module temperature 25°C AM=1.5; Power measurement tolerance: +/-3%
Electrical Characteristics (NOCT)
Module Type SRP-275-6PB
Maximum Power NOCT - Pmp (W) 203
Open Circuit Voltage - Voc (V) 35.70
Short Circuit Current - Isc (A) 7.29
Maximum Power Voltage - Vmp (V) 29.50
Maximum Power Current - Imp (A) 6.88
NOCT: Irradiance 800 W/m2 ambient temperature 20°C wind speed: 1m/s; Power measurement tolerance: +/-3%
SRP-6PB SERIES 6 INCH 60 CELLS
260-275w
Valsa Product Code PV275WSRP-6PB
3.2 265W - 280 W SERAPHIM PANEL 60 CELL
Power Tolerance
Power Tolerance (W) (0,+4.99)
Maximum System Voltage (V) 1000 (TÜV), 1000(UL)
Maximum Series Fuse Rating (A) 15
Temperature Characteristics
Pmax Temperature Coefficient -0.41 %/°C
Voc Temperature Coefficient -0.32 %/°C
Isc Temperature Coefficient +0.05 %/°C
Operating Temperature -40 ~ +85°C
Nominal Operating Cell Temperature (NOCT) 45 ± 2°C
Mechanical Specifications
External Dimensions 1640 x 992 x 40 mm
Weight 19.0 kg
Solar Cells Polycrystalline 156 x 156 mm (60pcs)
Front Glass 3.2 mm tempered glass, low iron, AR coating
Frame Anodized aluminium alloy
Junxion Box IP67
Output Cables 4.0 m2 cable length: 900mm
Connector MC4 Compatible
Mechanical Load 5400 Pa
S U S T A I N A B I L I T Y S O L U T I O N S
13
Valsa Product Code PV315WSRP-E01B
Power Tolerance (STC and NOCT)
Power Tolerance (W) (0,+4.99)
Maximum System Voltage (V) 1000 (TÜV), 1000(UL)
Maximum Series Fuse Rating (A) 20A
Temperature Characteristics
Pmax Temperature Coefficient -0.40 %/°C
Voc Temperature Coefficient -0.32 %/°C
Isc Temperature Coefficient +0.05 %/°C
Operating Temperature -40 ~ +85°C
Nominal Operating Cell Temperature (NOCT) 45 ± 2°C
Electrical Characteristics (STC)
Module Type SRP-315-E01B
Maximum Power STC - Pmp (W) 315
Open Circuit Voltage - Voc (V) 44.60
Short Circuit Current - Isc (A) 9.02
Maximum Power Voltage - Vmp (V) 36.20
Maximum Power Current - Imp (A) 8.71
Module Efficiency STC - nm (%) 18.52
STC: Irradiance 1000 W/m2 module temperature 25°C AM=1.5; Power measurement tolerance: +/-3%
Electrical Characteristics (NOCT)
Module Type SRP-315-E01B
Maximum Power NOCT - Pmp (W) 233
Open Circuit Voltage - Voc (V) 41.17
Short Circuit Current - Isc (A) 7.24
Maximum Power Voltage - Vmp (V) 33.93
Maximum Power Current - Imp (A) 6.87
NOCT: Irradiance 800 W/m2 ambient temperature 20°C wind speed: 1m/s; Power measurement tolerance: +/-3%
Mechanical Specifications
External Dimensions 1623 x 1048 x 40 mm
Weight 19.0 kg
Solar Cells Mono Crystalline
Front Glass 3.2 mm tempered glass, low iron,
Frame Anodized aluminium alloy
Junxion Box IP67
Output Cables 4.0 m2 cable length: 1000mm
Connector MC4 Compatible
Mechanical Load 5400 Pa
3.3 315W - 325W ECLIPSE SERAPHIM PANEL 60 CELL
ECLIPSE SRP-E01B
315-325w
S U S T A I N A B I L I T Y S O L U T I O N S
14
INVERTERS
OFF GRID/HyBRID
Off-grid systems are completely disconnected from the utility grid. These systems typically include a solar array, DC charge controller, batteries, bidirectional inverter and controls (with the possible addition of wind and other fuel generator alternatives for high load applications). In this configuration, energy is collected and stored to meet all local power requirements.
GRID TIED
Grid-tie is a common photovoltaic (PV) or solar system installation configuration in which electricity is generated by the PV system and routed to customer loads, offsetting the utility electrical demand of a business.
MICRO INVERTER
A solar micro-inverter, or simply microinverter, is a plug-and-play device used in photovoltaics, that converts direct current (DC) generated by a single solar module to alternating current (AC). The output from several microinverters can be combined and often fed to the electrical grid.
S U S T A I N A B I L I T Y S O L U T I O N S
15
4.1 OFF GRID/HyBRID
4.1.1 LyNX - AXPERT INVERTERS (OFF GRID)
Axpert MKS is equipped with MPPT solar charge controller to maximize and regulate DC power from the solar array for charging the battery bank, providing reliable power conversion in compact size.• Pure sine wave inverter• Built-in equalization function to extend battery life cycle• Built-in MPPT solar charge controller• Selectable input voltage range for home appliances and PC’s• Selectable charging current based on applications• Configurable AC/Solar input priority• Compatible to mains voltage or generator power
Model 3kVA 5kVA
Valsa product code INVAXP3K48V INVAXP5PF1_48VSPECIFICATIONS
MODEL Axpert MKS 3K-48 Axpert MKS 5K-48
Rated Power 3000VA/2400W 5000VA/5000W
Parallel Capacity No Yes, 9 Units
INPUT
Voltage 230 VAC
Selectable Voltage Range 170-280 VAC (For Personal Computers); 90-280 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto Sensing)
OUTPUT
AC Voltage Regulation (Batt.Mode) 230 VAC ± 5%
Surge Power 6000VA 10000VA
Efficiency 93%
Transfer Time 10 ms (For Personal Computers); 20ms (For Home Appliances)
Waveform Pure Sine Wave
BATTERY & AC CHARGER
Battery Voltage 48VDC 48VDC
Floating Charge Voltage 54VDC 54VDC
Overcharge Protection 62VDC 60VDC
SOLAR CHARGER & AC CHARGER
Maximum PV Array Power 900W 4000W
MPPT Range & Operating Voltage 60VDC~88VDC 60VDC~115VDC
Maximum PV Array Open Circuit Voltage 102VDC 145VDC
Maximum Solar Charge Current 18A 80A
Maximum AC Charge Current 15A 60A
Maximum Charge Current 33A 140A
Maximum Efficiency 98%
Standby Power Consumption 2W
PHYSICAL
Dimensions D x W x H (mm) 120 x 295 x 468 120 x 295 x 468
Net Weight 7.4 11
OPERATING ENVIROMENT
Humidity 5% to 96% Relative Humidity (Non-Condensing)
Operating Temperature 0°C to 55°C
Storage Temperature -15°C to 60°C
S U S T A I N A B I L I T Y S O L U T I O N S
16
S U S T A I N A B I L I T Y S O L U T I O N S
4.1.2 VICTRON GRID TIE INVERTERS
Valsa can supply a wide variety of Victron Inverters upon request:
MULTIPLUS INVERTER QUATTRO INVERTER EASy SOLAR INVERTER
Features • Two AC Outputs• Virtually unlimited power thanks to
parallel operation• Three phase capability• PowerControl - Dealing with limited
generator shore side or grid power• PowerAssist – Boosting the capacity of
shore or generator power• Solar energy: AC power available even
during a grid failure• On-site Monitoring and control• Remote Monitoring and control• Remote configuration
Features:• Two AC inputs with integrated transfer
switch• Two AC Outputs• Virtually unlimited power thanks to
parallel operation• Three phase capability• PowerControl - Dealing with limited
generator, shore side or grid power• PowerAssist- Boosting shore or
generator power• Solar energy: AC power available even
during a grid failure• On-site Monitoring and control• Remote Monitoring and control• Remote configuring
Features:• The all-in-one solar power solution• Color Control panel• AC distribution• PowerAssist• Unique solar application software
17
S U S T A I N A B I L I T Y S O L U T I O N S
Power Control Yes Yes
Power Assist Yes Yes
Transfer Switch 16 or 50 Yes
INVERTERInput voltage range (V DC) 9.5 - 17V 19 - 33V 38 - 66V 9.5 - 17V 19 - 33V 38 - 66V
Output Output voltages: 230VAC ± 2% Frequency: 50Hz ±0.1% (1)
Output voltages: 230VAC ± 2% Frequency: 50Hz ±0.1% (1)
Cont. output power at 25°C (VA) (3) 3000 5000
Cont. output power at 25°C (W) 2400 4000
Cont. output power at 40°C (W) 2200 3700Cont. output power at 65°C (W) 1700 3000
Peak power (W) 6000 10000
Maximum efficiency (%) 93/ 94/ 95 94/ 94/ 95
Zero load power (W) 20 / 20 / 25 30 / 30 / 35
Zero load power in AES mode (W) 15 / 15 /20 20 / 25 /30
Zero load power in Search mode (W) 8/ 10/ 12 10 / 10/ 15
CHARGERAc Input Input voltage range: 187-265 VAC Input
frequency:45 - 65Hz Power factor: 1(2x) Input voltage range: 187-265 VAC Input frequency:45 - 65Hz Power factor: 1
Charge voltage ‘absorption’ (V DC) 14.4 / 28.8 /57.6 14.4 / 28.8 /57.6
Charge voltage ‘float’ (V DC) 13.8 / 27.6 / 55.2 13.8 / 27.6 / 55.2
Starage mode (V DC) 13.2 / 26.4 / 52.8 13.2 / 26.4 / 52.8
Charge current house battery (A) (4) 120 / 70 / 35 220 / 120 / 70
Battery temperature sensor Yes Yes
GENERALAuxiliary output (5) Yes (16A) 50
Programmable relay (6) Yes 3x
Protection (2) a-g a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
For parallel and three phase operation, remote monitoring and system integration
General purpose com. Port Yes 2x
Remote on-off Yes Yes
Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing) max 95%
Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing) max 95%
ENCLOSURECommon Characteristics Material & Colour: aluminium (blue RAL
5012) Protection category: IP 21Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
Four M8 bolts (2 plus and 2 minus connections)
230V AC-connection Screw terminals 13 mm2 (6 AWG) Bolts M6
Weight (kg) 18 30Dimensions (hxwxd in mm) 362x258x218 444 x 328 x 240
STANDARDSafety EN-IEC 60335-1, EN-IEC 60335-2-29,
IEC 62109-1EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1
Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Road Vehicles 12V and 24V models: ECE R10-4 12V and 24V models: ECE R10-4
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 VAC on inverter output g) input voltage ripple too high
3) Non-linear load, crest factor 3:1 4) At 25˚C ambient 5) Switches off when no external AC source available 6) Programmable relay that can a.o. be set for general alarm, DC under voltage or genset start/stop function AC rating: 230 V/4A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC
Model MultiPlus - 48/3000/35 Quattro - 48/5000/70-100/100
Valsa product code PMP483021010 QUA485024000
1) According to IEC 62109-1. DIN rail for optional overvoltage protection (type 2) is included. 2) And at Umpp min / Udc.r / Umpp max 3) Also available in the light version.
18
S U S T A I N A B I L I T Y S O L U T I O N S
INVERTER/CHARGERTransfer switch 50A 100AINVERTERInput voltage range 38 - 66V 38 - 66VHeavy Duty’ output AC2 16 AOutput AC 1a, 1b, 1c, 1d Output voltages: 230VAC ± 2% Frequency: 50Hz ±0.1% (1)Cont. output power at 25°C (3) 3000 VA / 2400 W 5000 VA / 4000 WCont. output power at 40°C 2200 W 3700 WCont. output power at 65°C 1700 W 3000 WPeak power 6000 W 10000 WMaximum efficiency 95% 95%Zero load power 25 W 35 WZero load power in Search mode 12 W 15 WCHARGERAC Input Input voltage range: 187-265 VAC Input frequency:45 - 65Hz Power factor: 1Charge voltage ‘absorption’ 57.6 V 57.6 VCharge voltage ‘float’ 55.2 V 55.2 VStarage mode 52.8 V 52.8 VCharge current 35 A 70 ABattery temperature sensor YesProgrammable relay (5) YesProtection (2) a-gSOLAR CHARGE CONTROLLERModel MPPT 150 / 70 - MC4 MPPT 150 / 100 - MC4Maximum output current (4) 70 A 100 AMaximum PV power 4000 W 5800 WMaximum PV open curciut voltage 150 VMaximum efficiency 98%Self-consumption 10mACharge voltage ‘adsorption’ default setting 57.6 V 57.6VCharge voltage ‘float’ default setting 55.2V 55.2V
Charge algorithm multi-stage adaptiveTemperature compensation -32 mV / °C -64 mV / °CProtection a-gCOMMON CHARACTERISTICSOperating temp. range -40 to +65°C (fan assisted cooling)Humidity (non-condensing): max 95 %ENCLOSUREMaterial & Colour aluminium (blue RAL 5012) Protection category IP 21Battery-connection Four M8 bolts (2 plus and 2 minus connections)PV connection Two sets of MC4 PV connectors. Three sets of MC4 PV connectors.230V AC-connection Screw terminals 13 mm2 (6 AWG)Weight (kg) 28kg 48 kgDimensions (hxwxd in mm) 810x258x218 877x328x241STANDARDSafety EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1Emission, Immunity EN 55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2,
EN 61000-6-11) Can be adjusted to 60Hz and to 240V 2) Protection: a. Output short circuit b. Overload c. Battery voltage too high d. Battery voltage too low e. Temperature too high f. 230 VAC on inverter output g. Input voltage ripple too high
3) Non-linear load, crest factor 3:1 4) At 25°C ambient 5) Programmable relay which can be set for general alarm, DC under voltage or genset start signal function
Model EasySolar 48/3000/35-50 EasySolar 48/5000/70-100 MPPT150/70
Valsa product code PMP483027010 PMP485027000
19
S U S T A I N A B I L I T Y S O L U T I O N S
4.2 GRID TIED INVERTERS 4.2.1 FRONIUS PRIMO
The Fronius Primo in power categories from 3.0 to 8.2 kW. This single-phase, transformerless device is the ideal inverter for private households. SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier. The communication package included as standard, with WLAN, energy management, several interfaces makes the Fronius Primo a communicative inverter for owner-occupiers.
Model PRIMO 5.0-1 PRIMO 8.2-1Valsa Product Code 4,210,063 4,210,060INPUT DATAMax. input current (Idc max 1 / Idc max 2) 12.0 A / 12.0 A 18.0 A / 18.0 AMax. array short circuit current (MPP1/MPP2) 18.0 A / 18.0 A 27.0 A / 27.0 AMin. input voltage (Udc min) 80VFeed-in start voltage (Udc start) 80VNominal input voltage (Udc,r) 700VMax. input voltage (Udc max) 1000VMPP voltage range (Umpp min – Umpp max) 240 - 800 V 270 - 800 VNumber of MPP trackers 2Number of DC connections 2 + 2OUTPUT DATAAC nominal output (Pac,r) 5000 W 8200 WMax. output power 5000 VA 8200 VAAC output current (Iac nom) 21,7 A 35,7 AGrid connection (voltage range) 1 ~ NPE 220 V / 230 V (180 V - 270 V)Frequency (frequency range) 50 Hz / 60 Hz (45 - 65 Hz)Total harmonic distortion < 5 %Power factor (cos φac,r) 0.85 - 1 ind. / cap.GENERAL DATADimensions (height x width x depth) 645 x 431 x 204 mmWeight 21.5 kgDegree of protection IP 65Protection class 1Overvoltage category (DC /AC) 1) 2 / 3Night-time consumption < 1 WInverter design TransformerlessCooling Regulated air coolingInstallation Indoor and outdoor installationAmbient temperature range -40 - +55 °CPermitted humidity 0 - 100 %Max. altitude 4,000 mDC connection technology 2x DC+1, 2x DC+2 and 4x DC- screw terminals 2.5 - 16 mm2
AC connection technology 3-pole AC screw terminals 2.5 - 16 mm2
Certificates and compliance with standardsDIN V VDE 0126-1-1/A1, IEC 62109-1/-2, IEC 62116, IEC 61727,
AS 4777-2, AS 4777-3, G83/2, G59/3, CEI 0-21EFFICIENCyMax. efficiency 97,80% 97,80%European efficiency (ηEU) 96,40% 97,20%MPP adaptation efficiency > 99.9 %PROTECTION DEVICESDC insulation measurement YesOverload behavior Operating point shift. Power limitationDC disconnector YesINTERFACESWLAN / Ethernet LAN Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)6 inputs and 4 digital inputs/outputs Interface to ripple control receiverUSB (A socket) 2) Datalogging, inverter update via USB flash drive2x RS422 (RJ45 socket) 2) Fronius Solar Net Signalling output 2) Energy management (potential-free relay output)Datalogger and Webserver Included External input 2) S0-Meter Interface / Input for overvoltage protectionRS485 Modbus RTU SunSpec or meter connection
1) According to IEC 62109-1. 2) Also available in the light version.
Model SYMO 10.0-3-M SYMO 20.0-3-M ECO 27.0-3-SValsa Product Code 4.210.050 4.210.054 4,210,057,040
INPUT DATAMax. input current (Idc max) 27.0 A / 16.5 A 33,0 A / 27,0 A 47.7 AMax. array short circuit current 40.5 A / 24.8 A 49,5 A / 40,5 A 71.6 AMin. input voltage (Udc min) 200 V 200V 580 VFeed-in start voltage (Udc start) 200 V 200V 650 VNominal input voltage (Udc,r) 600 V 600V 580 VMax. input voltage (Udc max) 1,000 V 1000V 1,000 VMPP voltage range (Umpp min – Umpp max) 270 - 800 V 420 - 800 V 580 - 850 VNumber of MPP trackers 2 2 1Number of DC connections 3 + 3 3+3 6OUTPUT DATAAC nominal output (Pac,r) 10,000 W 20,000 W 27,000 WMax. output power 10,000 VA 20,000 VA 27,000 VAAC output current (Iac nom) 16,0 A 31,9 A 39.0 AGrid connection (voltage range 3~NPE 400 V / 230 V or 3~NPE
380 V / 220 V (+20 % / -30 %)~NPE 380 V / 220 V or 3~NPE 400 V / 230 V (+20 % / -30%)
Frequency (frequency range) 50 Hz / 60 Hz (45 - 65 Hz) 50 Hz / 60 Hz (45 - 65 Hz)Total harmonic distortion < 2 % <2,0 %Power factor (cos φac,r) 0 - 1 ind. / cap. 0 - 1 ind. / capGENERAL DATADimensions (height x width x depth) 725 x 510 x 225 mm 725 x 510 x 225 mmWeight 34,8 kg 43,4 kg 35,7 kgDegree of protection IP 66 IP 66Protection class 1 1Overvoltage category (DC / AC) 1) 2 / 3 2 / 3Night-time consumption < 1 W < 1 WInverter concept Transformerless TransformerlessCooling Regulated air cooling Reglated air coolingInstallation Indoor and outdoor installation Indoor and outdoor installationAmbient temperature range -25 - +60 °C -25 - + 60°CPermitted humidity 0 - 100 % 0 to 100%Max. altitude 2,000 m / 3,400 m (unrestricted
/ restricted voltage range)2,000 m
DC connection technology 6x DC+ and 6x DC- screw terminals 2.5 - 16 mm²
6x DC+ and 6x DC- screw terminals 2,5 - 16 mm2
AC connection technology 5-pole AC screw terminals 2.5 - 16 mm²
5-pole AC screw terminals 2,5 - 16 mm2
Certificates and compliance with standards
ÖVE / ÖNORM E 8001-4-712, DIN V VDE 0126-1-1/A1, VDE AR N 4105, IEC 62109-1/-2, IEC 62116, IEC 61727, AS 3100, AS 4777-2, AS 4777-3, CER 06-190, G83/2, G59/3, UNE 206007-1, SI 4777, CEI 0-16, CEI 0-21
EFFICIENCyMax. efficiency 98,0% 98,1% 98,30%European efficiency (ηEU) 97,4% 97.9 % 97,60%η at 5 % Pac,r 3) 87.9 / 92.5 / 89.2 % 91.9 / 95.2 / 93.0 % 95,9 / 93,1 %η at 10 % Pac,r 3) 91.2 / 94.9 / 92.8 % 94.8 / 96.9 / 95.8 % 96,8 / 95,7 %η at 20 % Pac,r 3) 94.6 / 97.1 / 96.1 % 96.3 / 97.8 / 97.1 % 97,7 / 97,1 %η at 25 % Pac,r 3) 95.4 / 97.3 / 96.6 % 96.7 / 97.9 / 97.4 % 98,1 / 97,3 %η at 30 % Pac,r 3) 95.6 / 97.5 / 96.9 % 96.8 / 98.0 / 97.6 % 98,1 / 97,4 %η at 50 % Pac,r 3) 96.3 / 97.9 / 97.4 % 97.0 / 98.1 / 97.8 % 98.3 / 97.5 %η at 75 % Pac.r 3) 96.5 / 98.0 / 97.6 % 97.0 / 98.1 / 97.7 % 98,2 / 97,6 %η at 100 % Pac,r 3) 96.5 / 98.0 / 97.6 % 96.8 / 98.0 / 97.6 % 98,1 / 97,5 %MPP adaptation efficiency > 99.9 % 99,90%PROTECTION DEVICESDC insulation measurement Yes Yes YesOverload behavior Operating point shift,
power limitationOperating point shift, power limitation
Operating point shift, power limitation
DC disconnector Yes Yes YesIntegrated string fuse holders 2) No No YesINTERFACESWLAN / Ethernet LAN Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)
6 inputs and 4 digital inputs/outputs Interface to ripple control receiver
USB (A socket) 3) Datalogging, inverter update via USB flash drive
2x RS422 (RJ45 socket) 3) Fronius Solar NetSignalling output 3) Energy management (floating relay output)Datalogger and Webserver IncludedExternal input 3) S0 meter connection / Evaluation of overvoltage protection
RS485 Modbus RTU SunSpec or meter connection
20
S U S T A I N A B I L I T Y S O L U T I O N S
4.2.2 FRONIUS SyMO & ECO RANGE
Boasting power categories ranging from 3.0 to 20.0 kW, the transformerless Fronius Symo is the three-phase inverterfor systems of every size. Owing to the SuperFlex Design, the Fronius Symo is the perfect answer to irregularly shaped or multi-oriented roofs. The standard interface to the internet via WLAN or Ethernet and the ease of integration of third-party components make the Fronius Symo one of the most communicative inverters on the market. Furthermore, the meter interface permits dynamic feed-in management and a clear visualisation of the consumption overview.
21
S U S T A I N A B I L I T Y S O L U T I O N S
4.3 MICRO INVERTER
4.3.1 AP SySTEM MICRO INVERTER
Our flagship product, the APsystems YC500I is a grid-tied microinverter with intelligent networking and monitoring systems to ensure maximum efficiency. Highly dependable and cost effective, the YC500I handles up to 310Wp modules with negligible clipping, delivering 250W AC per module with dual MPPT
FEATURES • Single unit connects two solar modules • Maximum output power 530W• Individual MPPT for each module • Rated up to 310Wp per module • PLC communication and Free monitoring• Integrated electromechanical relays
Model yC5001* yC1000-3
Valsa product code INVAPS500W45V INVAPS1K3P55V
Input Data (DC)
Recommended PV Module Power (STC) Range 180Wp -310Wp Up to 310Wp (4 Module Configuration)
Mppt Voltage Range Up to 360Wp (4 Module Configuration)
Operation Voltage Range 22V - 45V 16 – 55V
Maximum Input Voltage 16V - 52V 16V – 55V
Maximum Input Current 55V 60V
Maximum DC Short Circuit Current 10.5A x 2 14.8A x 4
Output Data (AC)
Maximum Output Power 530W 1000W
Nominal Output Voltage Single phase 230V or 3 phase 230/400v – 50Hz 3 phase 230/400v – 50Hz
Nominal Output Current 230V – 50Hz 230V / 400V – 50Hz
Nominal Output Frequency 2.17A 1.3A x 3
Power Factor >0.99 >0.99
Total Harmonic Distortion <3% <3%
Maximum Units per Branch (20A) 7 / 14 modules 12 for 20A x 3 Breaker / 48 Modules
Efficiency
Max. inverter Efficiency 95.50% 95%
Night Power Consumption 95% 94.5%
Nominal MPPT efficiency 99.5% 99.9%
Mechanical Data
Operation Ambient Temperature Range -40°C to + 65°C (-40°F to + 149°F ) -40°C to + 65°C (-40°F to + 149°F )
Storage Temperature Range -40°C to + 85°C (-40°F to + 185°F ) -40°C to + 85°C (-40°F to + 185°F )
Dimensions (W x H x D) 221mm X 167mm X 29mm 259mm X 242mm X 36mm
Weight 2.5kg 3.8kg
Enclosure Rating IP67 IP67
Cooling Natural convection - No Fans Natural convection - No Fans
Connecter Type MC4 MC4
Features & Compliance
Communication (Inverter to ECU) Power line (PLC) ZigBee (wireless)
Monitoring Module Level via EMA** software Module Level via EMA** software
Transformer design HF transformers, galvanically isolated HF transformers,galvanically isolated
Safety and EMC ComplianceEN62109-1; EN62109-2; EN61000-6-1; EN61000-6-2; EN61000-6-3;EN61000-6-4;
EN62109-1;EN62109-2;EN61000-6-1; EN61000-6-2;EN61000-6-3;EN61000-6-4;
Grid Connection Compliance EN50438 ; VDE126-1-1/A1 ; VDE-AR-N 4105 ; G83 issue 2 EN50438
Warranty 10 years standard; 20 years optional 10 years standard, extendable to 20 years
22
S U S T A I N A B I L I T Y S O L U T I O N S
5.1 LITHIUM-ION BATTERy SOLAR MD SS4037
The SS4037 relies on Lithium Iron-Phosphate battery for streamlined energy storage.The flexible modular design enables it to be set up with 1 to 6 batteries on the wall (3.7- 22.2kWh) The mypower24 3.7k features different storage capacities, according to user requirements. Capacity can be increased through parallel connection of the batteries.
Battery Type Lithium Iron Phosphate
Battery Module SS4037
Rated Battery Capacity 3.84kWh
Output Power Max 5kW
Usable Battery energy @0.3C 3.7 kWh
Nominal Voltage 51.2 V
Number of Battery Modules 1 Module
Weight 38kg
Operating Voltage 44.8V - 55.6 VDC
Communication CAN
Dimensions of SS4037 (mm) w x d x h 320 x 200 x 630
Battery Cycle Life [+25°C] >4000
Charging Efficiency 99%
Operating Temperature -5°C ~ +50°C
Transport UN3480 & UN38.3
Storage Duration 6 months @ +25°C
Safety Standard Compliance IEC 62619 / UN 38.3 / UL1642
Cell Certification TUV / CE / RCM / UL1642
IP Level IP65
Scalability Yes, Up to22kWh
Model SS 4037 Valsa Product Code BATTLIMP3-7
BATTERIES
23
5.2 LITHIUM-ION BATTERy SOLAR MD SS202
The Solar MD standard battery - SS202 has been widely used in energy storage applications in the African market. The battery is produced with world leading LiFEPO4 tegnology.
Features:• Stable discharge platform• Safe Design• Long lifecycle• High temperature performance range• High energy density• High charge and discharge rate• High efficiency• No pollution or gasses
Battery Type Lithium Iron Phosphate
Battery Module SS202*1PCS
Rated Battery Capacity 7.68kWh
Output Power Max 5kW
Usable Battery energy @0.3C 7.4 kWh
Nominal Voltage 51.2 V
Number Of Battery Modules 1 Module
Weight 89kg
Operating Voltage 44.8V - 55.6 VDC
Communication CAN
Dimensions Of Cabinet CB12 (mm) w x d x h 360 x 660 x 1200
Dimensions Of SS202 (mm) w x d x h 320 x 650 x 300
Net Weight Of SS202 50kg
Battery Cycle Life [+25°C] >3000
Charging Efficiency 99%
Operating Temperature -5°C ~ +50°C
Transport UN3480 & UN38.3
Storage Duration 6 months @ +25°C
Safety Standard Compliance IEC 62619 / UN 38.3 / UL1642
Cell Certification TUV / CE / RCM / UL1642
IP Level IP20
Scalability Yes up to 660kWh
Model SS 202 Valsa Product Code BATTLIMP7-4
S U S T A I N A B I L I T Y S O L U T I O N S
24
5.3 MSS SMART STORAGE SOLUTION
The MSS uses Lithium Iron-Phosphate technology to deliver a streamlined energy storage solution. A flexible, modular design allows for up to 3 different storage capacities, (i.e. 7.4kWh, 14.8kWh or 22.2kWh). Capacity can be increased further through parallel connections with additional MSS (up to 660kWh).
SySTEM FEATURES• Ideal for industrial, commercial or residential applications• Easy to install • Modular design • Supports parallel system connection• Supports CAN communication
BATTERy FEATURES• High energy density • High charge and discharge rate • High efficiency performance • Stable discharge platform • Excellent safety • Long life cycle • High temperature performance
Model MSS 7.4 MSS 14.8 MSS 22.2
Valsa product code BATTLIMP7-4 BATTLIMSS14-8 BATTLIMPSS22-2
Battery Type Lithium Iron Phosphate
Battery Module SS202*1PCS SS202*2PCS SS202*3PCS
Rated Battery Capacity 7.68kWh 15.36kWh 23.04kWh
Output Power Max 5kW Max 10kW Max 15kW
Usable Battery energy @0.3C 7.4 kWh 14.8 kWh 22.2 kWh
Nominal Voltage 51.2 V
Weight 89kg 139kg 189kg
Operating Voltage 44.8V - 55.6 VDC
Communication CAN
Dimensions of Cabinet CB12 (mm) w x d x h 360 x 660 x 1200
Dimensions of SS202 (mm) w x d x h 320 x 650 x 300
Net Weight of SS202 50kg
Battery Cycle Life [+25°C] >3000
Charging Efficiency 99%
Operating Temperature -5°C ~ +50°C
Transport UN3480 & UN38.3
Storage Duration 6 months @ +25°C
Safety Standard Compliance IEC 62619 / UN 38.3 / UL1642
Cell Certification TUV / CE / RCM / UL1642
IP Level IP20
Scalability Up to 660kWh
S U S T A I N A B I L I T Y S O L U T I O N S
25
MONITORING SYSTEM MYPOWER24
The Mypower 24 Monitoring System displays the performance of your solar system on either a personal computer or a smart phone. It is programmed to monitor the power usage, solar input and charging and discharging time of the connected batteries. This monitoring system can also change systems remotely.
This is a example of the web based monitoring software:
S U S T A I N A B I L I T Y S O L U T I O N S
6. MONITORING SySTEM MyPOWER24
26
CABLES
7.1 BETAFLAM SOLAR CABLES
Double insulated, electron-beam cross-linked cable for Photovoltaic power applications with reduced diameter and integrated jacket.
FEATURES • Electro-beam cross-linked compounds• UV, ozone and hydrolysis resistant• High temperature resistant, the materials do not melt or flow• Very long-life cycle > 25 Years at 90°• Compatible to all popular connectors • Flexible and space-saving installation
ConstructionConductor Tinned fine copper strands, according to VDE 0295/IEC 60228, class 5Insulation XLPO, flame retardant, halogen free, electron-beam cross linked.Jacket XLPO, flame retardant, halogen free, electron-beam cross-linked, UV and ozone resistantJacket colour BlackTechnical specificationsNominal voltage Uo/U= 600/1000V AC, 100/1800VDCTest voltage 6500V, 50Hz, 5 min.Temperature rating - 40° C up to +125°C - 40° F up to +257°FAmbient temperature >25 years (TUV) - 40° C up to + 90°C
- 40° F up to +194°FMax short circuit temperature 280°C + 536°FBending Radius Ø<10 mm Fixed installation > 4x ø Occasionally moved > 5x ø Ø>10 mm Fixed installation > 5x ø Occasionally moved > 7x øMaterial properties/standards Fire performance IEC 60332-1, IEC 60332-3-24Smoke emission IEC 61034; EN 50268-2Low fire load DIN 51900Approvals TüV 2 PfG 1169 02.2007 PV1-F Application standards UNE 21123; UNE 20.460-5-52, UTE C 32-502
Valsa Product Code Description Conductor
ConstructionConductor Ø Outer Ø Weight Fire Load
Specifications n x mm mm mm kg / km kWh / m
BF4BLK 4mm2 Black Sheath BETAflam Solar Cable
52 x 0.30 2.55 5.05 57 0.088
BF4BLK_RED 4mm2 Black Sheath with red line BETAflam Solar Cable
52 x 0.30 2.55 5.05 57 0.088
BF6BLK 6mm2 Black Sheath BETAflam Solar Cable
78 x 0.30 3.1 5.65 77 0.104
BF6BLK_RED 6mm2 Black Sheath with red line BETAflam Solar Cable
78 x 0.30 3.1 5.65 77 0.104
S U S T A I N A B I L I T Y S O L U T I O N S
27
CONNECTORS
8.1 CABLE COUPLER MC4
MC4 panel mount connectors for the interface between an inverter or combiner box and a branch cable.
8.2 BRANCH CONNECTOR MC4
Branch connectors allow for safe and simple serial or parallel connecting of PV-modules.
Product Code mm2 AWG b(mm) A(mm) Description Image
MC4F 4;6 12;10 5 5.5 - 9 Female cable coupler
MC4B 4;6 12;10 5 5.5 - 9 Male cable coupler
Product Code Description Image
MC4TF Female branch connector
MC4TM Male branch connector
S U S T A I N A B I L I T Y S O L U T I O N S
9.1 DC COMBINER BOX
The combiner box combines the output of multiple strings of PV modules for connection to the inverter. It is typically used in the larger commercial and utility scale PV power plants (greater than 500kW).
FEATURES • 1000VDC gPV Fuse holder• 1000V Surge Protector (type 2)• Individually certified and tested• Halogen-free plastic Enclosure• PC tinted window, with UV protection• From 2 to 12 strings available
28
S U S T A I N A B I L I T Y S O L U T I O N S
Size and dimension of DC Box might vary for different number of strings.
Model COMB3STRSPD COMBSTRSPD COMB5STRSPD COMB6STRSPD
Description 3 String 4 String 5 String 6 String
Colour RAL 7035 Grey
Dimensions, D x W x H 118mm x 238mm x 231mm 148mm x 310mm x 246mm
Weight 1.05 1.4
Resistance to impact IK08
Glow wire resistance 650°C
Ball Pressure Test 70°C
Ambient Temperature Range -25°C / +40°C
9.2 AC COMBINER BOX
Combiner box is the connection between mains power and inverter. Inverter controls bypass contactor inside AC combiner box.
FEATURES• Input Breaker• Output Breaker• Automatic Bypass Contactor• Halogen-free plastic Enclosure• PC tinted window, with UV protection
29
S U S T A I N A B I L I T Y S O L U T I O N S
Variuos sizes available for AC Box
PRE-ASSEMBLED PV SOLAR KITBACK PLATE
Valsa offers a pre-assembled back plate for your convenience for a quick and easy pre-wired installation. This provides any installer with an electrical wiring background a plug and play solution which saves time while maintaining the high standards required by PV Solar installations.
FEATURES• Light weight• Easy to handle and transport• Pre-assembled/wired • Fast Installation• Easy Commissioning
10.1 3KVA BACK PLATE KIT (OFF-GRID)
Model Back plate
Valsa product code ACC3KVABPCOMP
3kVA
Inverter Axpert 24VDC/48VDC
AC Combiner Box Input Breaker /20A/25A
Output Breaker /15A/20A
Internal bypass relay 40A
Manual bypass switch on request
DC Combiner Box Surge Protection Device Type II 1000V DC
Selectable Fuses 10A/ 20A /30A /40A / DC Breaker Optional
2-12 Strings available
AC Connector Box Specify Max Cable Allowed
Battery Connector Box Studded Size for ring-lug
Electrical Wiring Pre-assembled
PVC Conduit Included
MC4 Connecters Per String
30
S U S T A I N A B I L I T Y S O L U T I O N S
10.2 5KVA BACK PLATE KIT (OFF-GRID)
Model Axpert MK1 48VDC inverter
Valsa product code ACC5KVABPCOMP
AC Combiner Box Input Breaker /20A/25A
Output Breaker /15A/20A
Internal bypass relay 40A
Manual bypass switch on request
DC Combiner Box Surge Protection Device Type II 1000V DC
Selectable Fuses 10A/ 20A /30A /40A / DC Breaker Optional
2-12 Strings available
AC Connector Box Specify Max Cable Allowed
Battery Connector Box Studded Size for ring-lug
Electrical Wiring Pre-assembled
PVC Conduit Included
MC4 Connecters Per String
31
S U S T A I N A B I L I T Y S O L U T I O N S
Valsa offers a pre-assembled back plate for your convenience for a quick and easy pre-wired installation. This provides any installer with an electrical wiring background a plug and play solution which saves time while maintaining the high standards required by PV Solar installations.
FEATURES• Light weight• Easy to handle and transport• Pre-assembled/wired • Fast Installation• Easy Commissioning
11.1 CORDLESS POWER TOOLS
POWER TOOLS
Product Code Description Image
DC18RC 22 Minute 3.0Ah COMPACT FAST CHARGER 15 min 1.5Ah Optimum Charging System with built in thermal and voltage control
BL1830B 3.0 Ah 18V Lithium Ion Battery 40 percent Lighter with 430 percent life time work volume compared to NiCd battery FITS ALL 18V LI-ION MODELS Fuel gauge
BL1850B 5.0 Ah 18V Lithium Ion Battery 40 percent Lighter with 430 percent life time work volume compared to NiCd battery FITS ALL 18V LI-ION MODELS
DGA456ZJ Li ion 115mm ANGLE GRINDER BL MOTOR 8500 rpm Bat-tery fuel gauge Soft start Brake 18V
DCS551Z Li ion 150mm METAL CUTTER 3900 rpm electric brake built in job light Tool with TCT Saw Blade and Case only
DHP458ZK Li ion IMPACT DRIVER DRILL 13mm chuck 91Nm 58Nm var.2 speed 0 to 2000 rpm reverse built in job light Tool and Case only
DTD152Z Li ion IMPACT DRIVER 6.35mm 165 N.m var. speed 0 to 2900 rpm reverse built in job light Tool only
DTW190ZK Li ion CORDLESS IMPACT WRENCH 12.7mm 190Nm Torque 2300 rpm reverse built in job light variable speed brake 18V
DML802 Li ion LED FLASHLIGHT 13hrs. continuous use 3.0 Ah 12 position pivoting flashlight head Standard Type Without battery and charger
32
S U S T A I N A B I L I T Y S O L U T I O N S
11.2 CORDED TOOLS
Product Code Description Image
GA9050 Angle Grinder 230mm disc 6600 rpm 2000W Slim body design Dead Mans Switch
LS1040 255mm for wood aluminium cutting 4600 rpm 1650W With TCT wood cutting blade
LW1401 355mm disc steel cutting with abrasive wheel 3800 rpm 2000W Includes 724215-2 cut-off wheel
HP2050 13mm chuck var. 2 speed 0 to 1200 2900 rpm reverse_720W
With torque limiter
HP2070 13mm Geared chuck var. 2 speed 1st 0 to 1200 rpm and 2nd 0 to 2900 rpm reverse 1010W With torque limiter
HR2230 22mm SDS Plus var. speed 0 to 1050 rpm reverse 710W With torque limiter 2 operation modes Pistol Type
33
S U S T A I N A B I L I T Y S O L U T I O N S
S U S T A I N A B I L I T Y S O L U T I O N S
S U S T A I N A B I L I T Y S O L U T I O N S
Laser Park | Erf. 115 Battleship Road Cnr Boat Turn Road | Honeydew | Gauteng | 1724 | South Africa
Tel +27 (0) 11 794 1306 | +27 (0) 61 288 2572 | +27 (0) 84 235 5282
E-mail [email protected] | www.valsa.co.za
Valsa KenyaCasa Moko Plaza, North Airport Road, Eastern Bypass, Nairobi
Tel +254 724 919 571 E-mail [email protected]
Valsa Zimbabwe1 Southam Close, Conley Valley, Borrowdale, Showroom 22 Kent Road, Chisipite, Harare
Tel 00263772283889 / 0771539301 E-mail [email protected]
Battleship Road
Buco Honeydew
Beyers Naude
Beyers Naude
Boundry Rd
Ho
neyd
ew R
d
Honeydew Police Station
Bailey Rd
Chr
istia
an d
e W
et R
d
Nor
thum
berla
nd A
ve