Commercial Lighting Product Guide - The L.C. Doane Company€¦ · As a total product manufacturer...

Commercial Lighting

Product Guide

The L.C. Doane Company2

We wrote the book on toughness.

Our Commercial Lighting Product Guide showcases our specialized lighting equipment,

designed and manufactured to the highest industry standards.

Detailed product specifications available at:

www.lcdoane.com

For the full line of quality L.C. Doane Marine products, please refer to our online

US Navy MIL-SPEC and Commercial Marine catalogs.

Products are subject to change.

Designers and Manufacturers of Specialized Lighting Equipment 3

Table of Contents

About Us ..................................................................................................................................4

Buy American - ARRA ..............................................................................................................5

LED Technology .......................................................................................................................6

Correctional ..............................................................................................................................7

Behavioral Health ...................................................................................................................14

High Abuse .............................................................................................................................16

Vandal Resistant .....................................................................................................................17

Cleanroom ..............................................................................................................................18

Surgical Room ........................................................................................................................20

NSF - Food Processing ...........................................................................................................22

Specialty .................................................................................................................................23

Commercial Lighting

Product Guide


Lighting by the L.C. Doane Company has withstood the worst environments and toughest abuse onboard

U.S. naval vessels since 1947. Engineering and

manufacturing quality heavy-duty fixtures, we set

the standards for today’s submarine and surface ship

lighting. Navy fixtures are First Article qualified for

shock, vibration, closure, noise, lumen maintenance

and other conditions for combat readiness.

Utilizing our experience with shipboard lighting we

have been building tough, reliable lights for harsh and demanding environments including industrial,

correctional, institutional, and commercial marine – setting new records in durability and

performance. Everything we engineer and manufacture, whether from our standard product line or a

custom, specialty design goes through rigorous testing.

As a total product manufacturer from fabrication through finished assembly – L.C. Doane controls

the entire process of creating solutions for your lighting needs. Working in cold rolled steel, aluminum

and stainless steel, we use gas tungsten arc with pulse arc fusion welding methods for the cleanest,

most consistent welds possible on all seams. All parts are polyester powder coated in-house after

fabrication, ensuring smooth edges and a high-quality, long-lasting fixture.

About Us

L.C. Doane is proud to be a Woman-Owned Small Business (WOSB).

All L.C. Doane fixtures meet RoHS Compliance.


Buy American - ARRA

Our Manufacturing Process

We cut, form, weld and paint our own sheet metal; we form many of our lenses;

and assemble each luminaire to completion, all under one roof. Any part requiring

a production process beyond our in-house capabilities is handled by one of our

independent US fabricators. All purchased components are sourced through US

suppliers or bought directly from US manufacturers.

The American Recovery and Reinvestment Act

(ARRA) of 2009 requires that any public project it funds use material and goods manufactured in the United States.

At The LC Doane Company, we manufacture all our products domestically within

our 150,000 square foot facility in Ivoryton, Connecticut. When you specify an

L.C. Doane luminaire, you specify an American made light fixture that

exceeds ARRA requirements.

Environmentally ConscienceWhile manufacturing occurs under our roof, the power source is now created on top of our roof. Installed in October 2008, a field of solar panels provides us with clean energy right on-site. In August 2019, the company began its ground breaking construction to expand its existing solar system adding more than 200kw of capacity. Another level of US-made, environmentally conscience manufacturing.


LED Technology

In today’s world of high efficiency LED lighting, overall fixture efficacy

is of the utmost importance. Niche products for harsh environments

such as confinement, cleanroom and high abuse applications often

lack the high efficiency and performance that is available in standard

architectural fixtures. The combination of our Proprietary LED Module,

Programmable Driver, and Optic Plus lens allows us to provide some of

the highest Lumens/Watt available.

There are many avenues to re-designing and populating a fixture line with LED technology. The road we

chose was to design our own Discrete LED Module and completely re-design the reflector and heat-sink

assemblies for every fixture. The end result: Some of the most efficient LED fixtures designed for

harsh environments.

(SO) Specified Output Option

In addition to establishing factory preset output choices, L.C. Doane offers the Specified Output

Option. This allows the end user or consulting engineer to specify the required output, a valuable

feature for our made-to-order fixtures. Additionally, this allows us to meet or match any specified

fixture output and provide data for the input watts and delivered lumens for each fixture type.

Example: SO(49/5900)

For more information and examples of the excellent Lumens/Watt from LC Doane, please refer

to our LED Fixture Efficacy Competitive Comparison brochure.

Driver

Constant current

0-10Vdc Dimming standard

1% Dimming standard on all products

Factory programmable to 50% of rated output

LED Module

Proprietary discrete LED module

120 Mid-power LED per 2' module

Improved distribution from module

High output: 2' ~2900 – 3500 delivered lumens


L.C. Doane Correctional fixtures have been designed for use in all levels of correctional facilities and

high abuse applications and are available in a variety of mounting configurations: ceiling surface, wall

mount, corner mount, recessed flange and grid as well as specialty fixtures for unique applications.

Security Levels

There are no hard and fast rules for the gauge of material, lens thickness and construction style used

in confinement facilities. Each state will have some of their own requirements, as well as the criteria

determined by the specifier and facility owners. Below is a rough blueprint of the different security

levels and the suggested material:

Security Fixture Style Material Outer Lens

Super Max Clamshell Design 12 gauge Housing .500" Polycarbonate or CTG

Maximum Clamshell Design 14 gauge Housing .375" Polycarbonate or CTG

Medium Clamshell or Standard 16 gauge Housing/Door .250" Polycarbonate or CTG

Minimum Standard or High Abuse 16 – 18 gauge Housing/Door .187" Polycarbonate

Fixture Styles – Surface Mount

There are two main surface mount fixture styles for confinement facilities: Clamshell and

Non-Clamshell. The decision on which fixture style to use is outlined in the Security Levels section.

Fixture: TUSS

Clamshell Design

Back-plate mounts to surface

Housing hinges away from the back-plate

No door frame to be compromised

Contraband Drop Slot/Irretrievable Blade Trap

Non-Clamshell Design

Conventional fixture construction

Housing mounts directly to the surface

Hinged door frame

Fixture: SS

Cor

rect

iona

l


Lens and Lens Retention

Lens retention is an important feature of any

confinement fixture and L.C. Doane rises to the

challenge with 14 gauge CRS full length lens

retainers. Our lens assemblies can accommodate

all the required lens combinations, including .750"

CTG outer lens used in some of the Super Max

Facilities. We use a K12 acrylic internal lens for most

Fluorescent applications, and our Optic Plus internal

lens for most LED applications.

The Optic Plus lens is designed specifically for LED sources, completely hiding the diode

image while providing greater than 90% light transmission.

Fixture Styles – Recessed

Similar to surface mounted fixtures, there are

different styles of recessed fixtures, depending on

the ceiling type and security level required. Most

facilities are hard ceiling applications. On our

Recessed Flange – Outset Door fixture, the door

extends outside the flange providing another level of

security. These L.C. Doane fixtures are used for all levels of security, but ideal for Medium and above.

Additionally, we manufacture flange, grid and specialty ceiling system fixtures with a one piece door.

Fixture: CRC Series

Correctional Lens Options

Internal Lens External Lens

Optic Plus LED diffusing acrylic .187 in. clear polycarbonate

.125 in. K12 prismatic acrylic .250 in. clear polycarbonate

.125 in K12 prismatic polycarbonate .375 in. clear polycarbonate

.156 in. K12 prismatic polycarbonate .500 in. clear polycarbonate

.187 in. clear tempered glass



Cor

rect

iona

l


USL

Applications Sizing Housing Options Backplate

Designed for ceiling surface mount cell lighting in medium, maximum and super max security detention facilities.

10 in. width;2 ft., 4 ft.

• 16 gauge, medium security• 14 gauge, maximum security• 12 gauge, super max, Cold rolled

steel only

16 gauge die formed cold rolled steel with gap to create a contraband drop

slot / irretrievable blade trap

Typical Cell Using a 2' USL-LED

Label Units Avg Max Min Avg/Min Max/MinAll Points (3' plane) Fc 34.73 67.40 15.10 2.30 4.46

Grooming Fc 28.49 41.20 20.10 1.42 2.05

Room Fc 36.23 67.40 15.10 2.40 4.46

Task Fc 29.26 39.80 20.80 1.41 1.91

Reflectance: 70/70/20 LLF: 0.80 Room Dimension: 11'x7'x8'

LED

Shallow Depth

Width

Length

Mounting

Wiring

Clamshell Design

Housing

Fc

The first cell fixture specifically designed for LED

2-1/2" deep; a less obtrusive fixture in the cell, hindering access and limiting damage

10" width; narrower width also hinders access and damage

Available in either 2' or 4' fixtures

Surface mounts to ceiling

Driver with 3-wire self-aligning input power quick disconnect and 2-wire quick disconnect

With no hinge to compromise, the USL-LED is perfect for all levels of security

All electronics are on housing for ease of installation and maintenance

Single 2' fixture can provide required Fc on task and grooming

Product Highlight - USL-LED Cor

rect

iona

l

Calculation Summary


CRC

Applications Sizing Door

Designed for use in all levels of correctional facilities, behavioral health units, and high abuse applications. Anti-ligature for patient safety. IP65

• Dayrooms• Kitchens/Dining• Recreational• Corridors• Office Spaces • Patient Rooms

1x2,1x4, 2x2, 2x4

One-piece dieformed cold rolled steel overlapping door

14 gauge lens retainers

Freedom Hingetm permits removal and hinging from

either side

CRN-1

1x1One-piece dieformed cold

rolled steel overlapping door 14 gauge lens retainers

Recessed Grid / Flange Outset Door Correctional Specifications

FHG

Applications Sizing Door

Designed for use in all levels of correctional facilities and high abuse applications. IP54

• Dayrooms• Dining• Recreational• Corridors• Office Spaces • Patient Rooms

2x2, 2x4One-piece dieformed cold

rolled steel full-length welded piano hinge 14 gauge

lens retainers

Door gauge must match housing. 12 gauge super max

not available.FHN

1x2, 1x4

FHN-1

1x1One-piece dieformed cold

rolled steel full-length welded piano hinge

Recessed Flange Inset Door

VoltageVariable, 120-277V, 50/60Hz

Driver0-10Vdc 1% dimming, >0.9 PF, 80 CRI, Standard>90 CRI

LED Life>100,000

Internal Lens Options• Optic Plus LED diffusing acrylic• .125 in. K12 prismatic acrylic• .125 in. K12 prismatic polycarbonate• .156 in. K12 prismatic polycarbonate

External Lens Options• .187 in. clear polycarbonate• .250 in. clear polycarbonate• .375 in. clear polycarbonate• .500 in. clear polycarbonate• .187 in. clear tempered glass• .250 in. clear tempered glass• .375 in. clear tempered glass

Housing18 gauge cold rolled steel dieformed to shape seams welded ground smooth. 304 Stainless steel available.

Door Options• 18 gauge, minimum security• 16 gauge, medium security• 14 gauge, maximum security• 12 gauge, super max, Cold rolled steel only

Finish Options• Brushed stainless steel• White polyester powder-coated

Hardware Options• Stainless steel allen head with pin• Stainless steel torx head with pin• Phillips, Non-security

UL Listing Options• Damp Location• Wet Location

Available Options• Integral Emergency Battery Back-up• Integral Occupancy Sensor• Adjustable LED Night Light

Emergency Backup, LED Night Light, and Occupancy Sensor not available for CRN-1 or FHN-1 fixtures.

Cor

rect

iona

l


Cor

rect

iona

l

SM

Applications Sizing

Designed for ceiling surface mount cell lighting in medium, maximum and super max security detention facilities. IP34

• Cell Lighting• Corridors• Detention Centers

12.50 in. width;2 ft., 4 ft.

TUSS


TUST

13.75 in. width; 2 ft., 4 ft.

USB

Designed for ceiling surface mount cell lighting in medium, maximum and super max security detention facilities. The unique lens design maximizes fixture efficiency. IP44



USBN


USL

The low profile and superior LED technology make the USL the perfect solution for today’s cell lighting requirements. IP65 10 in. width;

2ft., 4ft.

USS

Designed for ceiling surface mount cell lighting in medium, maximum and super max security detention facilities. IP34


2x2, 2x4

UST

1x2, 1x4

Ceiling Surface ClamshellVoltageVariable, 120-277V, 50/60Hz


LED Life>100,000

Internal Lens Options• Optic Plus LED diffusing acrylic• .125 in. K12 prismatic acrylic• .125 in. K12 prismatic polycarbonate• .156 in. K12 prismatic polycarbonate


Backplate (Clamshell)16 gauge dieformed cold rolled steel with embossed mounting holes to create a contraband drop slot irretrievable blade trap. 304 Stainless steel available.

Housing/Clamshell Options• 18 gauge, minimum security• 16 gauge, medium security• 14 gauge, maximum security• 12 gauge, super max, Cold rolled steel only





Correctional Specifications

SO

Applications Sizing


• Cell Lighting• Corridors• Dayrooms• Dining• Office Spaces• Recreational

1X1

SS

2x2, 2x4

ST

1x2, 1x4

Ceiling Surface Non-Clamshell

Emergency Backup, LED Night Light, and Occupancy Sensor not available for SO fixture.


SC

Applications Sizing


• Cell Lighting• Corridors• Sally Ports• Stairwells• Recreational• Waiting Rooms• Washrooms

9.75 in. width;2 ft., 4 ft.

SCA


SCB


USX

Applications Sizing

Designed for corner mount cell lighting in medium, maximum and super max security detention facilities. IP34


SG

Applications Sizing



Corner Surface Non-Clamshell

Corner Clamshell

Wall Surface Non-Clamshell

SA

Applications Sizing

Designed for wall mount cell lighting in medium, maximum and super max security detention facilities. IP34


SH

Designed for wall mount direct / indirect cell lighting in medium, maximum and super max security detention facilities. IP34


SJ

Designed for wall mount direct / indirect lighting in behavioral health units and medium, maximum and super max security detention facility cells. Anti-ligaturefor patient safety. IP34

11.125 in. width;2 ft., 4 ft.

SM

Designed for ceiling surface mount cell lighting in medium, maximum and super max securitydetention facilities. IP34


Wall Surface Clamshell

Correctional SpecificationsVoltageVariable, 120-277V, 50/60Hz


LED Life>100,000

Internal Lens Options• Optic Plus LED diffusing acrylic• .125 in. K12 prismatic acrylic• .125 in K12 prismatic polycarbonate• .156 in. K12 prismatic polycarbonate


Backplate (Clamshell)16 gauge dieformed cold rolled steel with embossed mounting holes to create a contraband drop slot irretrievable blade trap. 304 Stainless steel available.

Housing/Clamshell Options• 18 gauge, minimum security• 16 gauge, medium security• 14 gauge, maximum security• 12 gauge, super max, Cold rolled steel only,

Available on USX, SA, SH, and SM fixtures only.





Cor

rect

iona

l


XTL

Applications Sizing Source

Designed for use in alllevels of correctional facilities and high abuse applications.

13 in. x 9.625 in.Parallel wired high output LED panel.

Exit SignageLight SourceParallel wired high output LED panel.

Letter Color• Red• Green

LED Life>100,000

Lens Options• .250 in. clear polycarbonate• .250 in. clear tempered glass

Mounting• Ceiling• End• Wall and Surface

Face Quantity• Single face• Double face

Housing14 gauge die-formed cold rolled steel with seams welded and ground smooth. 304 Stainless steel available.

Finish• Brushed stainless steel• White polyester powder-coated

Stainless Steel Hardware• Stainless steel allen head with pin• Stainless steel torx head with pin

UL Listing• Damp Location• Wet Location

Available Options• Emergency Battery Back-up• 24V Flashing Fire Alarm

Exit Specifications Cor

rect

iona

l


Beha

viora

l Hea

lth

Patient Safety Comes First

L.C. Doane fixtures for Behavioral Health have been designed for use in Patient Rooms and

Isolation Rooms and are available in a variety of configurations with Patient Safety in mind. Similar

to Correctional fixtures, there are no hard and fast rules for gauge of material or lens thickness.

Below are the suggested fixtures and their features for these critical areas.

Outset door ensures ligature resistance for patient safety

IP65 rated

Vandal resistant clear polycarbonate outer lens

Optic Plus internal lens provides a much softer, less harsh environment

Stainless steel tamper resistant fasteners prevent patient tampering

Anti-Microbial paint option available

Suggested material:

• 16 gauge housing and door

• .250 in clear polycarbonate outer lens

• Optic Plus LED diffusing acrylic lens

Recessed Grid/Flange Ceiling Mount – CRC

Bull-nose design with seams welded and ground smooth

Housing angled completely to the wall for ligature resistance

Vandal resistant clear polycarbonate outer lens

Optic Plus internal lens provides a much softer, less harsh environment

Stainless steel tamper resistant fasteners prevent patient tampering

Anti-Microbial paint option available

Suggested material:

• 16 gauge housing and backplate

• .250 in clear polycarbonate outer lens

• Optic Plus LED diffusing acrylic lens

Wall Mounted – SJ Series

L.C. Doane fixtures are included in the NYS OMH Patient SafetyStandards.

Please see the publication for specific products.


SC

Applications Sizing


• Corridors• Recreational• Sally Ports• Stairwells• Waiting Rooms• Washrooms


SCA


SCB


Corner Surface Non-Clamshell

Beha

viora

l Hea

lth

SJ

Applications Sizing

Designed for wall mount direct / indirect lighting in behavioral health units and detention facility cells. Anti-ligature for patient safety. IP34

11.125 in. width;2 ft., 4 ft.

Wall Surface Clamshell

CRC

Applications Sizing


• Corridors• Dayrooms• Kitchens/Dining• Office Spaces • Patient Rooms• Recreational

1x2,1x4, 2x2, 2x4

CRN-1

1x1

Recessed Grid / Flange Outset Door Behavioral Health SpecificationsVoltageVariable, 120-277V, 50/60Hz


LED Life>100,000

Internal Lens Options• Optic Plus LED diffusing acrylic• .125 in. K12 prismatic acrylic • .125 in. K12 prismatic polycarbonate• .156 in. K12 prismatic polycarbonate


Backplate16 gauge dieformed cold rolled steel with embossed mounting holes to create a contraband drop slot irretrievable blade trap. 304 Stainless steel available.

Housing/Clamshell Options• 18 gauge, minimum security• 16 gauge, medium security• 14 gauge, maximum security• 12 gauge, super max, Cold rolled steel only






LPN

Applications Sizing

Designed for general purpose lighting in high abuse environments. Standard 16 gauge housing. IP53 4.875 in. width;

50.75 in.

LPC

Designed for general purpose lighting in high abuse environments. For a surface mount conduit fixture of similar design, see our LPS series. Standard 16 gauge housing. IP53


LPS

Applications Sizing

Designed for general purpose lighting in high abuse environments. Standard 16 gauge housing. IP65 10 in. width;

2 ft., 4 ft.

RW3

Designed for general purpose lighting in high abuse environments. Standard 16 gauge housing, 18 gauge (RW3) Knockouts on both ends permit continuous row mounting. IP43

• Apartment Entryways• Cafeterias• Locker Rooms• Maintenance Rooms• Manufacturing• Parking Garage• Parks and Recreation• Restrooms• Schools and Universities• Stairwells• Storage Facilities• Walkways


RW6

5.875 in. width;2 ft., 4 ft.

SWD

12.5 in.,14 in. width;2 ft., 4 ft.

SW

9 in. width;9 in., 14 in.

SW6

5.875 in. width;2 ft., 4 ft.

Ceiling SurfaceHig

h A

buse

Ceiling / Wall Surface

High Abuse SpecificationsVoltageVariable, 120-277V, 50/60Hz


LED Life>100,000

LensOne piece, vandal resistant, .156 in., extruded,UV stabilized,prismatic polycarbonate lens. RW3 has an extruded polycarbonate Optic Plus lens.

Housing Options• 18 gauge, minimum security• 16 gauge, medium security• 14 gauge, maximum securitySelect gauge options available for RW6, SWD, SW, and SW6 only.





SWC

Applications Sizing

Designed for general purpose lighting in high abuse environments. Standard 16 gauge housing. Knockouts on both ends permit continuous row mounting. IP54

5.625 in. width;2 ft., 4 ft.

LPCC

Designed for general purpose lighting in high abuse environments. Standard 16 gauge housing. IP54 10 in. width;

2 ft., 4 ft.

Corner Surface


Lifetime WarrantyAt L.C. Doane, we understand the need for the reliability of lighting products

in a variety of demanding environments. We will repair or replace any

High Abuse or Vandal Resistant fixture (when installed according to our instructions) for the life of the original installation, if the fixture should fail due

to physical abuse.

Vand

al R

esist

ant


Applications Sizing

RW3

Designed for general purpose lighting in high abuse environments. Standard 18 gauge Knockouts on both ends permit continuous row mounting. IP43


VSA

Designed for general purpose, high abuse areas where an architectural look is required. Knockouts on both ends permit continuous row mounting. IP65-IP67

• Kitchen Areas• Locker Rooms• Natatoriums• Parking Garages• Stairwells• Shower• Under Canopy Outdoor

Path of Egress


VSB


Vandal Resistant SpecificationsVoltageVariable, 120-277V, 50/60Hz


LED Life>100,000

MountingSurface mount to ceilings and walls

LensExtruded polycarbonate Optic Plus

Housing / Lens FrameCast, extruded and fabricated marine grade aluminum. 304 Stainless available, RW3 only.

Finish Options• White polyester powder-coated• Matte Black• Light Gray• Custom, Consult factory

Hardware Options• Stainless steel torx head with pin• Phillips, Must use PH fasteners with

NSF option (See page 22)

UL ListingWet Location

Available Options• Integral Emergency Battery Back-up, • Integral Occ Sensor• Adjustable LED Night Light• Continuous row mounting• Corner mounting


Vivariums

Natatoriums

Laboratories

Kitchen areas

University research

Food processing and food service

Specialty applications requiring sealed, enclosed fixtures

Construction

In addition to providing quality lighting for exacting applications, the primary function of a

Cleanroom fixture is to keep particle matter from going from the plenum through or around

the fixture and into the space. L.C. Doane fixtures have been designed from the ground up to

meet these stringent requirements and specifications. Our cleanroom housings are fully enclosed,

welded, ground smooth and painted after fabrication. With our standard one piece outset door

to further seal the enclosure you can rely on L.C. Doane to keep contaminants from entering

the space. All L.C. Doane housings and doors are available in Cold Rolled Steel, Aluminum, and

Stainless Steel.

Application

The facilities and applications are different today than they were when our line of quality

Cleanroom fixtures were first introduced. Our Cleanroom fixtures were originally designed

for Pharmaceutical and PCB manufacturing. However, the same principle applies to today’s

environments. You will find applications for L.C. Doane Cleanroom fixtures in:

Cle

anro

om

US Federal Standards 209E/ISO Cleanroom Standards

Maximum Particles Per Feet Class ≥0.1µm ≥0.2µm ≥0.3µm ≥0.5µm ≥5µm ISO Equivalent

1 35 7 3 1 - ISO 3

10 350 75 30 10 - ISO 4

100 - 750 300 100 - ISO 5

1,000 - - - 1,000 7 ISO 6

10,000 - - - 10,000 70 ISO 7

100,000 - - - 100,000 700 ISO 8

AmberAmber/White

RedRed/White

White 30-50CCT

LED Color Options

Visit website for full Color LED specifications


FTD

Applications Sizing IP

Surface mounted with 6 in. depth. Knockouts on both ends permit continuous row mounting. IP43


IP43

Cle

anro

omGrid Laminar Airflow



LED Life>100,000

Internal Lens Options• Optic Plus LED diffusing acrylic• Optic Plus with RF grid, Must be used

with RF filter*

External Lens.125 in. clear polycarbonate lens

Housing18 gauge cold rolled steel dieformed to shape seams welded, ground smooth, and caulked airtight. Aluminum and 304 Stainless steel available.

Door Options• Aluminum• Cold rolled steel• Stainless steel


Hardware Options• Stainless steel allen head• Stainless steel torx head• Phillips, Must use PH fasteners with

NSF option (See page 22)


Available Options• Adjustable LED Night Light• Anti-microbial Coating• Integral Emergency Battery Back-up• Integral Occupancy Sensor• RF Filter*

Cleanroom Specifications

RXC


Cleanrooms, laboratories, research facilities, food areas, natatoriums. Mounts 1 in. T-grid ceiling. Low profile 2.375 in. depth. 2 in. above T-bar. Gasket and sealed with Overlapping door. IP65

1x2,1x4, 2x2, 2x4

IP65

RXS

Mounts ceiling surface or 1 to 1-1/2 in. T-grid ceiling. Gasket and sealed Overlapping door. IP66

1x4, 2x2, 2x4 IP66

RXS Red

For use in cleanroom vivarium applications. Mounts ceiling surface or 1 to 1-1/2 in. T-grid ceiling. Gasket and sealed Overlapping door. IP66 1x4, 2x2, 2x4 IP66

RXS Amber

For use in cleanroom pharmaceutical applications.Mounts ceiling surface or 1 to 1-1/2 in. T-grid ceiling. Gasket and sealed Overlapping door. IP66 1x4, 2x2, 2x4 IP66

RXR


Cleanrooms, laboratories, research facilities,food areas, natatoriums. Mounts recessed ceiling grid or flange, (1 to 1-1/2 in. T-grid ceiling) via swing arm brackets. Gasket and sealed with Overlapping door. IP66

1x2, 1x4, 2x2, 2x4

IP65

RXR Red

For use in cleanroom vivarium applications. Mounts recessed ceiling grid or flange, (1 to 1-1/2 in. T-grid ceiling) via swing arm brackets. Gasket and sealed with Overlapping door. IP66

1x2, 1x4, 2x2, 2x4

IP65

RXR Amber

For use in cleanroom pharmaceutical applications. Mounts recessed ceiling grid or flange, (1 to 1-1/2 in. T-grid ceiling) via swing arm brackets. Gasket and sealed with Overlapping door. IP66

1x2, 1x4, 2x2, 2x4

IP65

Recessed Grid / Flange

Surface / Grid


Luminaire Zone 1 Zone 2 Zone 3

HRA (10)

average 371 fc average 244 fc average 79 fc

max 379 fc max 371 fc max 133 fc

min 366 fc min 112 fc min 37 fc

average / min 1.01 average / min 2.18 average / min 2.14

max / min 1.03 max / min 3.31 max / min 3.59

Zone 1

Zone 2

Zone 3

360

270180

90

37 46 60 81 104 122 128 121 103 81 60 46 37

43 55 78 78 55 44

50 66 99 99 67 50

56 76 118 118 76 56

60 82 128 133 83 60

62 86 133 133 86 62

62 86 133 133 86 62

60 83 128 128 82 60

56 76 118 117 76 56

50 67 99 99 66 50

44 55 78 78 55 43

37 46 60 80 103 121 128 122 104 81 60 46 37

112 144 173 192 198 191 172 144 112

143 191 233 260 268 259 233 190 143

172 235 288 323 334

370379370

368375366

366371366

366375368

370379370

322 288 233 172

192 260 321 359 371 360 322 260 192

204 275 334 336 275 204

209 279 336 337 278 208

210 280 355 335 280

112144173

209

208 278 337 336 279 209

204 275 337 355 275 204

192 260 322 359 371 359 321 260 192

172 235 288 322 334 323 288 233 172

143 190 233 259 268 260 233 191 143

112 144 172 191 198 192

LED Surgical

Mounting

Size

Distribution

Filtering

Performance

Grid, Flange

1'x4', 2'x2', and 2'x4' applications

ASY/SYM (precision engineered optical system)

RFI / RF grid lens or MIL461 driver

Excellent distribution and uniformity in all three zones

Surgical Room Lighting

The HRA Series is specifically designed to meet and exceed medical industry standards. Our

HRAM fixture is provided with our proprietary Military Standard MIL461-F driver to provide

effective light levels without disturbing medical electrical devices. The HRA and HRAM Series

provide quality illumination through our precision engineered Asymmetrical / Symmetrical optical

system, meeting the requirements for all three surgical suite zones.

Surg

ical

Roo

m

Zone Values


HRA-LED

Applications Sizing Driver

Asymmetrical / Symmetrical Distribution

Designed for dust-free operation insurgical suites where maximum illumination is required in the operating zone. IP65 Recessed 1–1.5 in. T-Grid or hard ceiling applications. Hard ceiling (flange) mounts via swing arm brackets.Knockouts for earthquake cable supports provided.

Precisely engineered V-Shaped reflector provides perfect asymmetrical / symmetrical distribution.

Standard Dimming Driver

1x4, 2x2, 2x4Variable;

120-277V, 50/60Hz

HRAM-LED

MIL461 Driver (Noise Reduction)

1x4, 2x2, 2x4

MIL461 Tested and Certified;• 120 V, 60 Hz• 277 V, 60 Hz

HRS-LED

Symmetrical Distribution

Designed for dust-free operation insurgical suites where maximum illumination is required in the operating zone. IP65

Recessed 1–1.5 in. T-Grid or hard ceiling applications. Hard ceiling (flange) mounts via swing arm brackets.Knockouts for earthquake cable supports provided.

Optic Plus lens completely hides diode image while providing excellent light transmission.

Standard Dimming Driver

1x4, 2x2, 2x4Variable;

120-277V, 50/60Hz

HRSM-LED

MIL461 Driver (Noise Reduction)

1x4, 2x2, 2x4

MIL461 Tested and Certified;• 120 V, 60 Hz• 277 V, 60 Hz

Recessed Grid / FlangeVoltageVariable, 120-277V, 50/60Hz

Driver• Standard 0-10Vdc 1% dimming, >0.9

PF, 0.95 PF, 80 CRI, Standard>90 CRI

LED Life>100,000

Internal Lens Options• Optic Plus LED diffusing acrylic lens• Optic Plus with RF grid, Must be used

with RF filter*

External Lens Options.125 in. clear polycarbonate lens

HousingOne-piece 18 gauge cold rolled steel,gasketed and sealed overlapping door. Full length adjustable brackets secure the lens to the door. Aluminum and 304 Stainless steel available.

Door Options• Aluminum• Cold rolled steel• 304 Stainless steel

FinishAntimicrobial white powder-coat applied after phosphate pretreatment for superior adhesion and corrosion resistance. Brushed stainless steel door available.

HardwareStainless steel fasteners


Available Options• Integral Emergency Battery Back-up• RF Filter*

Surgical Specifications

CERTIFIED

MIL461

Surg

ical

Roo

m

The L.C. Doane MIL461 driver is tested and certified to MIL461-F, but is compliant to MIL-461 Certifications 461G and all RE, RS, CE, and CS test protocol

• The tests encompass Radiated Emissions, Radiated Susceptibility, Conducted Emissions

• L.C. Doane’s MIL461F compliant drivers are tested by a recognized, independent 3rd party lab.

MIL461 Driver:

• Use multiple driver/circuits to achieve light levels

• This solution assures the end user that ALL MIL461 requirements are met

• No RF Grid lens or RF Filtering required as the MIL461 is accomplished at the driver level

CERTIFIED

MIL461


RXC


Mounts 1 in. T-grid ceiling. Low profile 2.375 in. depth. 2 in. above T-bar. Gasket and sealed with Overlapping door. IP65 1x2,1x4,

2x2, 2x4IP65

RXS

Mounts ceiling surface or 1 to 1-1/2 in. T-grid ceiling. Gasket and sealed Overlapping door. IP66

1x4, 2x2, 2x4 IP66

RXS Red

For use in cleanroom vivarium applications. Mounts ceiling surface or 1 to 1-1/2 in. T-grid ceiling. Gasket and sealed Overlapping door. IP66 1x4, 2x2, 2x4 IP66

RXS Amber

For use in cleanroom pharmaceutical applications.Mounts ceiling surface or 1 to 1-1/2 in. T-grid ceiling. Gasket and sealed Overlapping door. IP66 1x4, 2x2, 2x4 IP66




LED Life>100,000

Internal Lens Options• Optic Plus LED diffusing acrylic lens• Optic Plus with RF grid, Must be used

with RF filter*

External Lens Options.125 in. clear polycarbonate lens

Housing18 gauge cold rolled steel dieformed to shape seams welded, ground smooth, and caulked airtight. Aluminum and 304 Stainless steel available.



Hardware Phillips


Available Options• Adjustable LED Night Light• Anti-microbial Coating• Integral Emergency Battery Back-up• Integral Occupancy Sensor• RF Filter*

NSF Specifications

VSA


Surface mounts to ceilings or walls. Closed cell foam gasket continuously seals lens frame to housing for up to IP67 rating. Row mountable. IP65-IP67


IP65-IP67

VSB


IP65-IP67

NSF

- Fo

od P

roce

ssin

g

RXR


Cleanrooms, laboratories, research facilities,food areas, natatoriums. Mounts recessed via swing arm brackets. Gasket and sealed with Overlapping door. IP65 1x2,1x4,

2x2, 2x4IP65

RXR Red

For use in cleanroom vivarium applications. Mounts recessed via swing arm brackets. Gasket and sealed with Overlapping door. IP65 1x2,1x4,

2x2, 2x4IP65

RXR Amber

For use in cleanroom pharmaceutical applications. Mounts recessed via swing arm brackets. Gasket and sealed with Overlapping door. IP65 1x2,1x4,

2x2, 2x4IP65

Recessed Grid / Flange

Surface / Grid


TRA

Applications Sizing Certifications

Designed for multiple mounting configurations in transit and transportation applications. The superior construction and LED Technology make the TRA the perfect solution for today’s high traffic requirements. IP65-IP67


UL Listed damp or wet location (Covered ceilings

only)Constructed to pass

MIL-S-901 Grade A, Type A, High Impact Shock Test, and

MIL-S-167 Type 1, Vibration Test.

RXA

Designed for Cleanrooms, laboratories, research facilities, vivariums, natatoriums. IP65

Mounts recessed in 2 in. T-grid ceiling.

1x4, 2x2, 2x4

18 gauge cold rolled steel, gasketed and sealed overlapping door.

Freedom HingeTM design permits removal and hinging from eitherside. Aluminum and stainless steel available.

STP

Designed for step and detail lighting in high abuse environments. No IP Rating. 3.50 in. width;

13.5 in. x 6.5 in.

16 gauge cold rolled steel. Aluminum and stainless steel available. Louvered door and opal lens options available.

Spec

ialty


Driver0-10Vdc 1% dimming, >0.9 PF, 80 CRI

LED Life>100,000

Lens OptionsSee website for specified options.

Housing18 gauge cold rolled steel dieformed to shape seams welded, ground smooth, and caulked airtight. Aluminum and Stainless steel available.


Hardware• Stainless steel allen head with pin• Stainless steel torx head with pin• Phillips, non-security


Available Options• Anti-microbial Coating• Integral Emergency Battery Back-up• Integral Occupancy Sensor• Adjustable LED Night Light

Specialty Specifications

CLS


Designed for use in industrial and hazardous location environments. Surface mounts to ceilings via shock absorbing mounting brackets. IP65

1x2, 1x4

UL 844 and UL 1598 listed, Certified for Class 1

Division 2 location groups A, B, C, and D; Class 2 Division 2

location groups F and G; Class 3.

M3(HL)

Designed for use in marine, industrial and hazardous location environments. IP65 10 in. width;

2 ft., 4 ft.(11.25 in. Bracket

width)

UL 844 and UL 1598A marine listed, T3C operating

temperature rated, -20 C to 40 C ambient temperature rated, Certified for Class 1 Division 2 location groups A, B, C, and

D; Class 3.

UCF


Designed for under-cabinet lighting in high abuse environments. Fluorescent only (UCF8). Knockouts on both ends permit continuous row mounting. IP43


UL Listed damp or wet location. Covered ceilings only.

UCF8


UL Listed damp or wet location. Covered ceilings only.

Surface Mounted Hazardous

Under Cabinet Lighting

Special Applications



Index

C

CLS CRC CRN-1

F

FHG FHN FHN-1 FTD

GGTO GTON

H

HRA HRAM HRS HRSM

L

LPC LPCC LPN LPS

M

M3(HL)

Commercial Lighting

Product Guide

U

UCF UCF8 USB USBN USL USS UST USX

V

VSA VSB

X

XTL

R

RW3 RW6 RXA RXC RXR RXS

S

SA SC SCA SCB SG SH SJ SM SO SS ST STP SW SW6 SWC

SWD

T

TRA TUSS TUST

25

110 Pond Meadow Road, PO Box 700 Ivoryton, CT 06442 860.767.8295 office • 860.767.1397 faxwww.lcdoane.com

Modifications are available to meet custom requirements. Specifications and dimensions are subject to change without notice.

REV 070820

Date post:	23-Oct-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Commercial Lighting Product Guide - The L.C. Doane Company€¦ · As a total product manufacturer...

Documents