Commercial Type B Gas Vent Model E/V 10" – 30" For more information, please contact factory authorized distributor: Showroom posters available upon request. PRINTED IN CANADA Installation Type B Gas Vent 19860 Fraser Highway, Langley, BC V3A 4C9 Phone: 604-530-4151 • Fax: 604-530-1133 Toll Free: 1-877-955-4805 #21 – 11150 38th Street SE, Calgary, AB T2C 2Z6 Phone: 403-720-0895 • Fax: 403-720-0897 Toll Free: 1-877-955-4815 20001 87th Avenue S, Bldg E, Kent, WA 98031 Phone: 253-872-3721 • Fax: 253-872-3724 Toll Free: 1-800-207-6859 www.eccomfg.com In USA – Connection to appliance and vent sizing to be in accordance with the NATURAL FUEL GAS CODE, ANSI Z223.1 (NFPA 54), NFPA 211, GAMA VENTING TABLES, and/or the requirements of the local authorities having jurisdiction. In Canada – Connection to appliance and vent sizing to be in accordance with the NATURAL GAS INSTALLATION CODE, CAN/CGA-B149.1 or the PROPANE INSTALLATION CODE, CAN/CGA-B149.2, and/or the requirements of the local authorities having jurisdiction. Tested to UL441 “Gas Vent” basic standard. Certification Commercial
Transcript
CommercialType B Gas VentModel E/V 10" – 30"
For more information, please contact factory authorized distributor:
Showroom posters available upon request.PRINTED IN CANADA
#21 – 11150 38th Street SE, Calgary, AB T2C 2Z6 Phone: 403-720-0895 • Fax: 403-720-0897 Toll Free: 1-877-955-4815
20001 87th Avenue S, Bldg E, Kent, WA 98031 Phone: 253-872-3721 • Fax: 253-872-3724 Toll Free: 1-800-207-6859
www.eccomfg.com
In USA – Connection to appliance and vent sizing to be in accordance with the NATURAL FUEL GAS CODE, ANSI Z223.1 (NFPA 54), NFPA 211, GAMA VENTING TABLES, and/or the requirements of the local authorities having jurisdiction.
In Canada – Connection to appliance and vent sizing to be in accordance with the NATURAL GAS INSTALLATION CODE, CAN/CGA-B149.1 or the PROPANE INSTALLATION CODE, CAN/CGA-B149.2, and/or the requirements of the local authorities having jurisdiction.
Tested to UL441 “Gas Vent” basic standard.
Certification
Com
mer
cial
Commercial (Model E/V)ECCO Type B Gas Vent Model E/V is a prefabricated metal vent used for venting approved gas burning equipment with flue gas temperatures at the draft hood not exceeding 470°F (245°C). Model E/V is available in sizes of 10" to 30" in diameter.
Simple InstallationPrestamped holes are formed in the male and female couplers making it easy to align lengths and insert screws provided with each component. This method is your assurance that the system will not come apart after installation. Large inventories of components are stocked in sizes of up to 30" in diameter, which give ECCO™ the ability to respond quickly to all requests, whatever the requirements.
DurabilityECCO Type B Gas Vent, Model E/V consists of formed couplers which maintain a 1" air wall between the inner conduit of aluminum and the outer casing of galvalume. Both the aluminum and galvalume offer high resistance to potential corrosion from products of combustion and ever increasing environmental effects.
SafetyAll components for ECCO Type B Gas Vent Model E/V meet the highest standards recommended by UL and ULC.
Construction Installation
AssemblyTo join vent pipes, insert male coupler into female coupler and use sheet metal screws through holes in female coupler to fasten pipes.
Die-Formed Couplings• Integrates the inner and
outer pipe as one unit• Ensures consistent
quality and fit
1" Insulating Air SpaceEliminates condensation, while keeping the outer
casing cool
Inside Conduit of AluminumResists corrosion
Pre-Stamped Screw Holes• No drilling required• Easy and quick assembly• Positive and strong lock
Outside Casing of Galvalume Steel
Provides extra strength and durability
Fire Stop Spacer
Support Assembly
Fire Stop Spacer
Notch Tabs on Fire Stop Spacer above Support Assembly
ECCO Manufacturing™ Model E/V 10"–30" Commercial Type B Gas Vent
