General catalogueCOMMERCIAL AND TECHNICAL INFORMATION
Commercial Range
2
How to read this catalogueIn this catalogue we show the high efficiency condensing system
complete range of BAXI products.
On each page, in addition to the product benefits, there
is a detailed list of the appliance characteristics, a technical chart,
and coloured icons.
These icons refer to the specific pages of the technical section of
the catalogue where, by segment, the technical drawings and all the
specific accessories are represented.
In the technical section you will find:
Dimensional technical drawingsGraphsFluesystems
Flue tube accessories
Hydraulic accessories
Thermo-regulation accessories
Otheraccessories
Company ProfileBAXI SPA has a proud tradition of developing and producing boilers
and heating systems to the highest technological standards.
For over 30 years BAXI SPA has provided a wide range of
cutting-edge solutions, anticipating market evolutions and paying
attention to customer needs.
3
High output condensing systems
More details and information on the website
By accessing to the www.baxi.it, Reserved Area and then to the Tech Area,
just after a quick registration it is possible to display and download the
following documents:
• Certifications
• Fault Finding List
• General Catalogues
• Instructions Manuals
• PCB Service Instructions
• Spare Parts Catalogues
• Technical Drawings
• Technical INFO
• Technical presentations
IndexHigh output wall-hung condensing boilers 5
High output floor standing boilers 6
Built-in heat-boxes - Luna Sat 7
Luna Platinum 12 - 32 kW 9
Luna Duo-tec MP 50 - 110 kW 10
Modular heating system for Luna Duo-tec MP (GMC+1) 11
Power HT 45 - 150 kW 12
Power HT 230 - 320 kW 13
Power HT-A 430 - 650 kW 14
Luna Sat 15
Technical section 19
4
High efficiency installationsBaxi condensing systems represent the ideal solution for installations where high outputs
are required.
The electronics platform of these boilers allows the control of single and cascade
installations and a complete range of thermoregulation accessories.
High modulation ratio The new ranges of high efficiency condensing boilers are distinguished by a wider
modulation ratio that grants a better efficiency thanks to reduced switch-on/ switch-off
of the boiler.
Cutting edge electronics The sophisticated electronics of the high efficiency condensing boilers allows to manage
single or cascade installation up to 16 boilers (Luna Duo-tec MP or Power HT 230-320).
It is just needed to connect the relevant accessories to the boiler’s electronics.
Compact weight and dimensions Compact weight and dimensions of Baxi high efficiency condensing systems, guarantee
the maximum flexibility and allow their installation also in small heat generator rooms.
Condensing technology is the latest face in boiler innovation. By employing
pre-mix burner know how, condensing boilers ensure higher performance
(efficiency up to 109,8%) thanks to the recovery of all the heat available
through combustion without wasting energy into the air, as happens with
traditional boilers.
5
High output condensing systems
Luna Platinum1.12/1.18
Luna Platinum1.24/1.32
Luna Duo-tec MP
1.50
Luna Duo-tec MP
1.60
Luna Duo-tec MP1.70
Luna Duo-tec MP
1.90
Luna Duo-tec MP
1.110
Maximum Heat Output
80°/60° CkW
12/16,9 24/32 45 55 65 85 102
Maximum Heat Output
50°/30° C kW
13,1/18,4 26,1/34,9 48,6 59,4 70,2 91,8 110,2
High output wall hung boilers
6
45-150 kW 230-320 kW 430-650 kW
Power HT1.450 - 1.650 - 1.850
1.1000 - 1.1150 - 1.1200
Power HT1.230 - 1.280 - 1.320
Power HT-A1.430 - 1.500 - 1.570 - 1.650
PowerHT
Maximum Heat
Output
80°/60° CkW
Maximum Heat
Output
50°/30° C kW
PowerHT
Maximum Heat
Output
80°/60° CkW
Maximum Heat
Output
50°/30° C kW
PowerHT-A
Maximum Heat
Output
80°/60° CkW
Maximum Heat
Output
50°/30° C kWModel Model Model
1.450 45 48,7 1.230 210,1 229,8 1.430 392,8 422,4
1.650 65 70,3 1.280 254,5 278,1 1.500 462 498,2
1.850 85 91,6 1.320 294 321,3 1.570 531,4 574,6
1.1000 100 107,8 1.650 601 651,5
1.1150 112 121,1
1.1200 120 129,7
1.1500 150 162
High output floor standing boilers
7
High output condensing systems
Wireless and M-BUS built-in heat boxes
Heating only
Luna SAT RC - Luna SAT RC-MBLuna SAT R/1 - Luna SAT R/1-MB Luna SAT RH - Luna SAT RH-MB
Luna SAT RH1 - Luna SAT RH1-MBLuna SAT RHG1 - Luna SAT RHG1-MB
Luna SAT RC - RackLuna SAT RP/1 - Luna SAT RP/1-MBLuna SAT RPH - Luna SAT RPH-MB
Luna SAT RPB - Luna RPB-MBLuna SAT RPE - Luna SAT RPE-MB
Luna SAT RPEH - Luna SAT RPEH-MBLuna SAT RP-SP-MB+2C
Luna SAT R2ZLuna SAT R2Z-MB
Combi
Luna SAT RS - Luna SAT RS-MBLuna SAT RST-MB
Luna SAT RSP - Luna SAT RA Luna SAT RSP-MB
Luna SAT R60 WH-MB(for wall hung installationwith integrated cylinder)
Luna SAT RS2ZLuna SAT RA2Z
Heatingand cooling
Luna SAT R2H - Luna SAT R2H-MB
Without pump (mixing valve) With pump To manage 2 zones
- Luna Sat R/1, RH, RPB, RPE, RPEH, RH1 and RHG1 are available also with built-in flow-meters (M-BUS models as well)
- RH1 and RH1-MB models are available also with pressure reducer on the flow-meters.
8
High outputcondensing systems Thermal systems for cascade installations Wall hung boilers - Luna Platinum 10 - Luna Duo-tec MP 11 - Modular heating system for Luna Duo-tec MP (GMC+) 12 Floor standing boilers - Power HT (outputs from 45 to 150 kW) 15 - Power HT (outputs from 230 to 320 kW) 16 - Power HT-A (outputs from 430 to 650 kW) 16 Wireless and M-BUS built-in heat boxes - Luna Sat-Heating only models 17 - Luna Sat-Heating and DHW production models 18
8
9
High output condensing systems
Removable control panel for wall-hung installation with •
wide text display, regulation knob, menu selection buttons
and back-lighting supplied with the boiler
Wide modulation ratio up to • 1÷10:betterefficiencythanks
to reduced switch-on/switch-off of the boiler
Gas Adaptive Control (GAC) system: combustion automatic•
controltomaintainconstantlythehighestlevelofefficiency
Integrated control of a solar system*•
Complete soundproofing of the generator•
Circulating pump with full modulation•
Frontal access for advanced diagnostics•
Hydraulic system 3 way electric diverter valveStainless steel AISI 316L premixing burnerStainless steel AISI 316L water/flue heat exchangerStainless steel enhaced DHW exchanger to ensure condensation also in DHW modeModulating fan with electronic speed adjusting systemAutomatic by-passMulti-speeds low energy pump of the heating circuit with built- in air ventSystem to prevent pump and diverter valve sticking operating every 24 hoursCentral relief valve set at 3 bar
Thermoregulation systemBuilt-in climatic regulation (outdoor sensor available as optional)Control of multi-zones system optionCascade system installation optionRoom sensor, central heating and sanitary timers included in the control panel
Control system Overheat limit thermostat of the water/flue exchangerHydraulic pressure switch to prevent boiler operating in event of low waterSafety NTC sensor against flues overheatElectronic temperatures control by NTC sensorsFull anti-frost deviceElectronic thermometerDigital central heating pressure gauge
Luna Platinum 12-32 kW
1.12 1.18 1.24 1.32
Product code 7102665 7108435 7106583 7108436
Maximum heating heat input kW 12,4 17,4 24,7 33
Maximum heating heat output 80/60°C kW 12 16,9 24 32
Maximum heating heat output 50/30°C kW 13,1 18,4 26,1 34,9
Minimum heating heat output 80/60°C kW 2 2,4 2,4 3,2
Minimum heating heat output 50/30°C kW 2,2 2,7 2,7 3,5
Energetic efficiency (92/42/CEE)
Average efficiency (DIN 4702-T8) % 109,8 109,8 109,8 109,8
Nominal efficiency 80/60°C % 97,8 97,7 97,6 97,6
Nominal efficiency 50/30°C % 105,8 105,8 105,7 105,7
Efficiency 30% % 107,8 107,7 107,6 107,6
NOx class (EN 483) 5 5 5 5
Minimum working temperature °C -5 -5 -5 -5
Expansion vessel capacity/pre-charge l/bar 8/0,8 8/0,8 8/0,8 10/0,8
Heating temperature range. °C 25/80 25/80 25/80 25/80
Maximum pressure heating circuit bar 3 3 3 3
Coaxial flue system Ø 60/100 max length m 10 10 10 10
Dual flue system Ø 80 max length m 80 80 80 80
Maximum flue mass flow rate kg/s 0,006 0,008 0,012 0,016
Minimum flue mass flow rate kg/s 0,001 0,001 0,001 0,002
Maximum flue temperature °C 75 75 80 80
Dimensions (h x w x d) mm 760 x 450 x 345
Net weight kg 34,5 34,5 34,5 37,5
Gas type Natural Gas/LPG
Power consumption W 108 122 120 130
Grade of protection IPX5D IPX5D IPX5D IPX5D
Technical pages 20-28 38-43 44 48
*in case of contemporary control of a solar system and a zone by the wall-mounted control panel, it is necessary to install a programmable clip in/external module THINK.
Outputs from 12 to 32 kW
10
Technical pages 21-30 38-43 45 48
Stainless steel AISI 316L single chamber•
(50 – 60 – 70 kW) and double chamber (90 – 110 kW)
exchanger: high output in compact size, reliability
and long life.
High modulation ratio (1• ÷9):betterefficiencythanks
to reduced switch-on/switch-off of the boiler
Digital control panel with push buttons and wide LCD •
display (numbers and symbols)
Compact size and minimal weight•
Complete range of accessories for single and cascade •
installations
Luna Duo-tec MP 50-110 kW
1.50 1.60 1.70 1.90 1.110
Product code 7104050 7104051 7104052 7104651 7104652
Maximum heating heat input kW 46,3 56,6 66,9 87,4 104,9
Maximum heating heat output 80/60°C kW 45 55 65 85 102
Maximum heating heat output 50/30°C kW 48,6 59,4 70,2 91,8 110,2
Minimum heat output 80/60°C kW 5 6,1 7,2 9,4 11,4
Minimum heat output 50/30°C kW 5,4 6,6 7,8 10,2 12,3
Energetic efficiency 92/42/CEE HHHH HHHH HHHH HHHH HHHH
Average efficiency (DIN 4702-T8) % 109,8 109,8 109,8 109,8 109,8
Nominal efficiency 80/60°C % 97,2 97,2 97,2 97,2 97,2
Nominal efficiency 50/30°C % 105 105 105 105 105
Efficiency at 30% % 107,8 107,4 107,1 107,5 107,4
NOx class (EN 483) 5 5 5 5 5
Minimum working temperature °C -5 -5 -5 -5 -5
Water content lt 4 5 6 9 10
Heating system max pressure bar 4 4 4 4 4
Safety valve intervention pressure bar 4 4 4 4 4
Regulation of water temperaturein heating circuit
°C 25/80 25/80 25/80 25/80 25/80
Coaxial flue system max length m 10 (Ø 80/125) 10 (ø 80/125) 10 (ø 80/125) 10 (ø 110/160) 10 (ø 110/160)
Dual flue system max length m 60 (ø 80) 60 (ø 80) 60 (ø 80) 27 (ø 110) 27 (ø 110)
Maximum flue mass flow rate kg/s 0,021 0,026 0,031 0,04 0,047
Minimum flue mass flow rate kg/s 0,002 0,003 0,004 0,005 0,005
Maximum flue temperature °C 80 80 74 70 70
Dimensions (h x w x d) mm 766x450x377 766x450x377 766x450x505 952x600x584 952x600x584
Net weight kg 40 40 50 83 93
Gas type Nat. gas/LPG
Power consumption W 190 210 210 275 320
Grade of protection IPX5D IPX5D IPX5D IPX5D IPX5D
Outputs from 50 to 110 kW
Hydraulic system Modulating pump included in the boilerSystem to prevent pump sticking operating every 24 hoursFlow and return NTC sensorsWater tray for condensate drain from supply air duct
Thermoregulation systemBuilt-in climatic regulation (outdoor sensor supplied as optional)Mixed zones systems (high and low temperatures) installation optionCascade system installation option (up to 16 boilers)NTC sensor for DHW cylinder control optionHeating and DHW timers integrated in the control panel
Control system Full electronic anti-frost deviceElectronic thermometerCentral heating pressure gaugeFlow over-temperature thermostat
11
High output condensing systems
CABINETmade of:
N° of installed Boilers
LUNA DUO-TEC MP possible
configuration
Tot. installedkW
1 door*
1.50 1.601.70 50
6090
1101.901.110
2 doors*
or
1.50 1.601.701.90
1.110
From
50 kW
to
220 kW
3 doors*
or
1.50 1.601.701.90
1.110
From
50 kW
to
330 kW
Solutions with 1,2,3 doors cabinet•
Compact cabinet: 175 cm height•
Hydraulic separator can be assembled inside the •
cabinet
Insulated hydraulic collectors sustained by fixing •
brackets
Built-in condensate tray•
Hydraulic systemHydraulic connections between boilers and copper collectors
Integration of the hydraulic safety accessories
Expansion vessels included
Flow/return right or left side possibility
* to install the hydraulic compensator and the system accessories sheltered from the bad weather it is possible to order an additional cabinet
Modular heating systemfor Luna Duo-tec MP (GMC+)
Technical pages 22
NEW
12
Hydraulic system Stainless steel AISI 316L premixing burnerStainless steel AISI 316L water/flue exchangerSystem to prevent pump sticking operating every 24 hours
Thermoregulation system Remote controller and climatic regulator (supplied as optional)Built-in weather compensation function (outdoor sensor supplied as optional)Mixed zones systems (low and high temperature) installation option Cascade system installation optionNTC sensor for DHW cylinder control option
Control system Central heating and indirect cylinder timerHydraulic pressure switch to prevent boiler operating in event of low waterFull electronic anti-frost deviceElectronic thermometer Central heating pressure gauge
Power HT 45-150 kW
Outputs from 45 to 150 kW
1.450 1.650 1.850 1.1000 1.1150 1.1200 1.1500
Product code WHS 43104560 43106560 43108560 43110060 43111260 43112060 43115060
Maximum heating heat input kW 46,4 67 87,2 102,7 115 123,2 154
Maximum heating heat output 80/60°C kW 45 65 85 100 112 120 150
Maximum heating heat output 50/30°C kW 48,7 70,3 91,6 107,8 121,1 129,7 162
Minimum heat output 80/60°C kW 11,8 13,4 32,2 35,8 39 39 40,4
Minimum heat output 50/30°C kW 12,8 14,5 34,9 38,8 42,1 42,1 43,7
Energetic efficiency 92/42/CEE HHHH HHHH HHHH HHHH HHHH HHHH HHHH
Average efficiency (DIN 4702-T8) % 109,8 109,8 109,8 109,8 109,8 109,8 109,8
Nominal efficiency 80/60°C % 97,3 97,3 97,5 97,4 97,4 97,4 97,4
Nominal efficiency 50/30°C % 105,2 105,3 105,1 105 105,3 105,3 105,2
Efficiency at 30% % 107,6 107,6 107,3 107,4 107,5 107,5 107,2
NOx class (EN 483) 5 5 5 5 5 5 5
Minimum working temperature °C -5 -5 -5 -5 -5 -5 -5
Safety valve intervention pressure bar 3 3 3 3 3 3 3
Heating system max pressure bar 4 4 4 4 4 4 4
Regulation of water temperaturein heating circuit
°C 25/80 25/80 25/80 25/80 25/80 25/80 25/80
Primary circuit water flow (ΔT=20°C) l/h 1.935 2.795 3.700 4.300 4.800 5.200 6.500
Water content l 5,1 6,5 13,7 21 23,3 23,3 25,3
Flue tube ø mm 80 80 100 100 100 100 100
Flue ducts max length m 30 20 20 20 20 20 20
Maximum flue mass flow rate kg/s 0,022 0,031 0,041 0,049 0,054 0,059 0,073
Minimum flue mass flow rate kg/s 0,006 0,007 0,016 0,018 0,019 0,019 0,02
Maximum flue temperature °C 72 73 78 80 72 77 75
Dimensions (h x w x d) mm 850x450x621 850x450x693 850x450x801 850x450x871 850x450x1024 850x450x1024 850x450x1132
Net weight kg 60 68 75 83 95 95 103
Gas type Nat. gas/LPG
Power consumption W 90 110 100 160 128 135 235
Stainless steel double chamber exchanger: high output in •
compact size, reliability and long life
Digital control panel “advanced CPS system” with push •
buttons and wide LCD display with text and symbols
Complete range of temperature regulation accessories•
Minimal weight and size•
Complete range of accessories for single •
and cascade installations
Technical pages 23-32 38-44 47 48
13
High output condensing systems
Technical pages 25-32 42 48 50
Hydraulic system Hydraulic connections on the rear sideSticking pump check systemFlow and return NTC sensorsPremixed low-emissions burner
Thermoregulation system Built-in climatic regulation (outdoor sensor included)Mixed zones systems (high and low temperatures) zone controllers as optionalCascade system installation option (up to 16 boilers)NTC sensor for DHW cylinder control optionHeating and DHW scheduler integrated in the control panel
Control system Full electronic anti-frost deviceElectronic thermometerFlow over-temperature thermostat
Power HT 230-320 kW
Outputs from 230 to 320 kW
Aluminium-Silicon exchanger with glass wool insulation:•
highefficiencyandreliabilityandlonglife
Modulation ratio (1• ÷6)
Low emissions pre-mixing burner•
Digital control panel with back-lighted LCD display •
and advanced electronics to manage single and cascade
installations
Easy to transport and to install•
Low noise operational•
Power HT 1.230 Power HT 1.280 Power HT 1.320
Product code LSX 411230600 . 411280600 . 411320600 .Nominal heat output kW 215,0 260,0 300,0
Maximum heating heat output 80/60°C kW 210,1 254,5 294,0
Maximum heating heat output 50/30°C kW 229,8 278,1 321,3
Minimum heat output 80/60°C kW 33,5 40,2 45,9
Minimum heat output 50/30°C kW 37,4 44,9 51,4
Energetic efficiency 92/42/CEE
Average efficiency (DIN 4702-T8) % 109,6 109,7 109,7
Nominal efficiency 80/60°C % 97,9 98,0 98,0
Nominal efficiency 50/30°C % 106,9 107,0 107,1
Efficiency at 30% % 105,4 105,6 105,7
NOx Class (EN 483) 5 5 5
Minimum working temperature °C -5 -5 -5
Heating system max pressure bar 6 6 6
Water content lt 38 45 53
Flue ducts max length m 60 (Ø200) 60 (Ø200) 60 (Ø200)
Maximum flue mass flow rate kg/s 0,097 0,118 0,136
Minimum flue mass flow rate kg/s 0,016 0,019 0,021
Maximum flue temperature °C 61 60 60
Dimensions (h x w x d)* mm 1458x692x1231 1458x692x1324 1458x692x1417
Net weight kg 285 314 344
Gas type Natural Gas / LPG
Power consumption W 330 350 410
(*) Flue ducts and hydraulic pipes included
14
Hydraulic system Hydraulic connections on the top sideSticking pump check systemFlow and return NTC sensorsPremixed low-emissions burner
Thermoregulation system Built-in climatic regulation (outdoor sensor included)Mixed zones systems (high and low temperatures) zone controllers as optionalCascade system installation option (up to 16 boilers)NTC sensor for DHW cylinder control optionHeating and DHW scheduler integrated in the control panel
Control system Full electronic anti-frost deviceElectronic thermometerFlow over-temperature thermostat
Power HT-A 430-650 kW
Outputs from 430 to 650 kW
Aluminium-Silicon exchanger with glass wool insulation:•
highannualefficiency,reliabilityandlonglife
Modulation ratio (1• ÷5)
Digital control panel with back-lighted LCD display •
and advanced electronics to manage single and cascade
installations
Easy to transport and to install•
Low noise operational•
Power HT 1.430 Power HT 1.500 Power HT 1.570 Power HT 1.650
Product code LSX 411430600 . 411500600 . 411570600 . 411650600 .Nominal heat output kW 400 470 540 610
Maximum heating heat output 80/60°C kW 392,8 462 531,4 601
Maximum heating heat output 50/30°C kW 422,4 498,2 574,6 651,5
Minimum heat output 80/60°C kW 77 91 105 119
Minimum heat output 50/30°C kW 84,8 99,8 115 130,4
Energetic efficiency 92/42/CEE
Average efficiency (DIN 4702-T8) % 109,4 109,3 109,2 109,1
Nominal efficiency 80/60°C % 98,2 98,3 98,4 98,5
Nominal efficiency 50/30°C % 105,6 106 106,4 106,8
NOx Class (EN 483) 5 5 5 5
Minimum working temperature °C -5 -5 -5 -5
Heating system max pressure bar 6 6 6 6
Water content lt 73 84 97 106
Flue ducts max length m 60 (Ø250) 60 (Ø250) 60 (Ø250) 60 (Ø250)
Maximum flue mass flow rate kg/s 0,188 0,22 0,253 0,286
Minimum flue mass flow rate kg/s 0,038 0,044 0,05 0,057
Maximum flue temperature °C 60 60 60 60
Dimensions (h x w x d)* mm 1526x762x1882 1526x762x2192 1526x762x2192 1526x762x2192
Net weight kg 540 598 636 674
Gas type Natural Gas / LPG
Power consumption W 463 583 790 750
(*) Flue ducts and hydraulic pipes included
43Technical pages 27-33 37-38
NEW
15
High output condensing systems
Luna Sat-Heating only modelsModels without pump
R/1: KSV 71411151R/1-MB: KSV 71411541
RC: KSV 71413111RC-MB: KSV 71413121
RH: KSV 71411321RH-MB: KSV 71411591
RH1: KSV 71411811RH1-MB: KSV 71411851
RHG1: KSV 71412361RHG1-MB: KSV 71412371
R2H: KSV 71412041R2H-MB: KSV 71412051
RC R/1 RH RH1 RHG1 R2H**
Heating circuit maximum pressure bar 4 4 4 4 4 4
Water contents I 0,5 1,5 1,5 1,5 2 1,5
Power supply voltage V 230 230 230 230 230 230
Power supply frequency Hz 50 50 50 50 50 50
Power consumption W 15 15 15 15 15 15
Width of the case mm 450 600 650 400* 500 800
Height of the case mm 450 650 650 600* 850 750
Depth of the case mm 110 150 150 200* 150 150
Net weight Kg 3,2 11 11 9 13 9
Maximum temperatureof the warm fluid (inlet)
°C 90 90 90 90 90 90
Feed flow (inlet) l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h
Flow-losses kPa 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h
(*) The case can not be used. Measures are referred to RPH and RH1 models without casing including interception taps (**) For heating and cooling
Technical pages 34 51
16
RP/1: KSV 71411161RP/1-MB: KSV 71411551
R2Z: KSV 71410101R2Z-MB: KSV 71411901
RPH: KSV 71411331RPH-MB: KSV 71411601
RPE: KSV 71411911RPE-MB: KSV 71411921
RPEH: KSV 71412451RPEH-MB: KSV 71412461
RP-SP-MB + 2C: KSV 71414401
RPB: KSV 71411171RPB-MB: KSV 71411581
RP/1 RPH RPB RPE RPEH RP-SP-MB+2C R2ZModels with pump • • • • • • •
Models with 2nd zone - - - - - - •
Heating temperature regulationwith high climatic curve °C - - - 25/80 - - 25/80
Heating circuit maximum pressure bar 4 4 4 4 4 4 4
Water contents I 2 2 2 2 2 9,5 3,5
Power supply voltage V 230 230 230 230 230 230 230
Power supply frequency Hz 50 50 50 50 50 50 50
Power consumption W 110 110 110 110 110 110 210
Width of the case mm 600 600* 600 600 600 600 800
Height of the case mm 650 716* 650 650 850 850 750
Depth of the case mm 150 150* 150 150 150 150 150
Net weight Kg 13 13 12 13,50 14 17 22
Maximum temperatureof the warm fluid (inlet)
°C 90 90 90 90 90 90 90
Feed flow (inlet) l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h 700÷ 1000 l/h
Flow-losses kPa 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h
(*) The case can not be used. Measures are referred to RPH and RH1 models without casing including interception taps
Luna Sat-Heating only modelsModels with pump
Model to manage2 different zones
NEW
Technical pages 34 51
17
High output condensing systems
Luna Sat-Heatingand DHW production models
RSP: KSV 71410091RSP-MB: KSV 71411571
RS2Z: KSV 71410111 RA: KSV 71410771
R60WH-MBKSV 71413071
RST-MB: KSV 71413971RA2Z: KSV 71410781
RSP RS2Z RA R60WH RA2Z RSTDHW production • • • • • •
Models with pump • • • • • -
Models with 2nd zone - • - - • -
Heating temperature regulation withhigh climatic curve
°C 25/80 25/80 25/80 25/80 25/80 25/80
DHW regulation °C 30/60 30/60 30/65 30/65 30/65 30/60
DHW production with ΔT=35°Cand inlet water temperature 75°C
l/m 14,3 14,3 14,3 14,3 14,3 14,3
Heating circuit maximum pressure bar 4 4 4 4 4 4
DHW circuit maximum pressure bar 8 8 8 8 8 8
DHW circuit minimum pressure bar 0,2 0,2 0,2 0,2 0,2 0,2
Water contents l 2,5 4 2 5 4 2
Power supply voltage V 230 230 230 230 230 230
Power supply frequency Hz 50 50 50 50 50 50
Power consumption W 110 210 150 110 210 15
Width of the case mm 600 800 600 910 800 600
Height of the case mm 650 750 650 450 750 600
Depth of the case mm 150 150 150 473 150 150
Net weight Kg 18 28 16 38 25 16
Maximum temperatureof the warm fluid (inlet)
°C 90 90 90 90 90 90
Feed flow (inlet) l/h 1000÷ 1500 1000÷ 1500 1000÷ 1500 1000÷ 1500 1000÷ 1500 1000÷ 1500
Flow-losses kPa 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h 20Kpa at 700 l/h
Technical pages 34 51
18
Luna Sat RC in Rack
MR1-MR2-MR3 = apartment heating flowRR1- RR2 - RR3 = apartment heating returnUC1 - UC2 - UC3 = heat meter outlet 1 - 2 - 3 to the apartmentIP = primary inlet from centralized systemUP = primary outlet to the centralized systemEC1 = inlet to the first heat meter
AE = hole for cables
MR1-MR2-MR3 = apartment heating flowRR1- RR2 - RR3 = apartment heating returnUC1 - UC2 - UC3 = heat meter outlet 1 - 2 - 3 to the apartmentIP = primary inlet from centralized systemUP = primary outlet to the centralized systemEC1 = inlet to the first heat meter system
AE = hole for cables
Parallel assembly of 3 or 4 Luna Sat RC or RC-MB option•
Up to 3 flow meters for each Luna Sat RC installation option•
Insulated hydraulic manifolds available as option•
Built-in taps in the casing•
RCHeating circuit maximum pressure bar 4
Water content l 0,5
Power supply voltage V 230
Power supply frequency Hz 50
Power consumption W 15
Width of the case mm 450
Height of the case mm 450
Depth of the case mm 110
Net weight Kg 3,2
DIMENSIONS3 modules Rack 4 modules Rack
NEW
Technical pages 34 51
19
High output condensing systems
Technical Section
Technical drawings 20 GraphsFlue systems
Flue pipes accessories 37
Hydraulic accessories 44
Thermoregulation accessories 48
Other accessories 51
Products technical data 53
19
20
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
450
760
345
177
131m
in.
140,5
65,5
54,5
43,5
32,5
21,5
10 200 400 600
FLOW RATE/HEAD CURVE
FLOW RATE (l/h)
HEAD
800 1000
MAX
MIN
1200 1400
30 35 40
Effic
ienc
y of
the
boile
r %
Return temperature of the system °C
EFFICIENCY OF THE BOILER ACCORDING TO THE RETURN TEMPERATURE
30% load100% load
45 50 55 60979899
100101102103104105106107108
30 35 40
Flue
s te
mpe
ratu
re %
Return temperature of the system °C
45 50 55 6030354045505560657075
100% load
30% load
FLUES TEMPERATURE ACCORDING TO THE RETURN TEMPERATURE
S.C. Condensing trap that can be installed on a Ø 21 pipeM.R. Heating system flow G 3/4”M.B. Storage tank flow G 3/4”GAS Gas inlet G 3/4”E.S. Mains water G 1/2”R.R. Heating system return G 3/4”
M.B.
Luna Platinum1.12-1.18-1.24-1.32
High output condensing system
Technical drawings - graphs - flue systems
21
Technical drawings - graphs - flue systems
(A) 377 mm Mod. 1.50-1.60 505 mm Mod. 1.70
Coaxial flue system ø 80/125Dual flue system ø 80
Coaxial flue system ø 110/160Dual flue system ø 110
Luna Duo-tec MP 1.50-1.60-1.70
Luna Duo-tec MP 1.90-1.110�������������������
450 (A)
225
140
763
225 229
600
354,5
223
952
245,5 112
584
S.C GAS M.R. R.R.S.C GAS M.R. R.R.
GAS Gas inlet G ¾”M.R. Heating system flow (G1”) with cylinder connection optionR.R. Heating system return (G1”) with cylinder connection optionS.C. Condensing trap that can be installed on a Ø 21 pipe
GAS Gas inlet G 1”M.R. Heating system flow (G1-G1/2”) with cylinder connection optionR.R. Heating system return (G1-1/2”) with cylinder connection optionS.C. Condensing trap that can be installed on a Ø 21 pipe
FLOW RATE (l/h)
HEAD
(mH 2
O)
FLOW RATE/HEAD CURVELUNA DUO-TEC MP 1.50 - 1.60
HEAD
(mH 2
O)
FLOW RATE (l/h)
FLOW RATE/HEAD CURVELUNA DUO-TEC MP 1.110
FLOW RATE (l/h)
HEAD
(mH 2
O)
FLOW RATE/HEAD CURVELUNA DUO-TEC MP 1.90
30 35 40
Effic
ienc
y of
the
boile
r %
Return temperature of the system °C
EFFICIENCY OF THE BOILER ACCORDING TO THE RETURN TEMPERATURE
30% load100% load
45 50 55 60979899
100101102103104105106107108
HEAD
(mH 2
O)
FLOW RATE (l/h)
FLOW RATE/HEAD CURVELUNA DUO-TEC MP 1.70
30 35 40
Flues
tem
pera
ture
%
Return temperature of the system °C
45 50 55 6030354045505560657075
100% load
30% load
FLUES TEMPERATURE ACCORDING TO THE RETURN TEMPERATURE
High output condensing system
22
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
High output condensing systemModular heating system for Luna Duo-tec MP (GMC+) - 1 door
Modular heating system for Luna Duo-tec MP (GMC+) - 2 doors
Modular heating system for Luna Duo-tec MP (GMC+) - 3 doors
Dimensions (mm) Modules W H D
2 doors 1600 1750 800
Dimensions (mm) Modules W H D
1 door 803 1750 800
Dimensions (mm) Modules W H D
3 doors 2400 1750 800
1750
216
149O
128314 205 281
800
417
260
120
310
401,5 401,5
193
456 347
1750
216
149O
128314 205 281
800
417
260
120
310
401,5 401,5
193
456 347
1750
216
149O
128314 205 281
800
417
260
120
310
401,5 401,5
193
456 347
1750
216
149O
1600 128314 205 281
800
260
120
417
310
401,5 800 401,5
193
456 800 347
1750
216
149O
310
401,5 800 800 401,5
193
456 800 800 347
2400
800
260
120
128314 205 281
417
1750
216
149O
310
401,5 800 800 401,5
193
456 800 800 347
2400
800
260
120
128314 205 281
417
1750
216
149O31
0
401,5 800 800 401,5
193
456 800 800 347
2400
800
260
120
128314 205 281
417
1750
216
149O
310
401,5 800 800 401,5
193
456 800 800 347
2400
800
260
120
128314 205 281
417
1750
216
149O
1600 128314 205 281
800
260
120
417
310
401,5 800 401,5
193
456 800 347
1750
216
149O
1600 128314 205 281
800
260
120
417
310
401,5 800 401,5
193
456 800 347
1750
216
149O
1600 128314 205 281
800
260
120
417
310
401,5 800 401,5
193
456 800 347
1750
216
149O
1600 128314 205 281
800
260
120
417
310
401,5 800 401,5
193
456 800 347
frontal view
frontal view
frontal view
side view
side view
side view
up view
Luna Duo-tec MP 90-110
Luna Duo-tec MP 90-110
Luna Duo-tec MP 50-60-70
Luna Duo-tec MP 50-60-70
Technical drawings - graphs - flue systems
23
Technical drawings - graphs - flue systems
Depth (A) mm
Placement RVA
Power HT
45 cm
45 cm/ 2 cm
45 cm/ 2 cm
EXCHANGER PRESSURE LOSS
FLOW RATE (l/h)
EXCH
ANGE
R PR
ESSU
RE L
OSS
(mH 2
O)
EXCHANGER PRESSURE LOSS
FLOW RATE (l/h)
EXCH
ANGE
R PR
ESSU
RE L
OSS
(mH 2
O)
FLOW RATE/HEAD CURVE
FLOW RATE (l/h)
HEAD
(mH 2
O)
EXCHANGER PRESSURE LOSS
FLOW RATE (l/h)
EXCH
ANGE
R PR
ESSU
RE L
OSS
(mH 2
O)
Power HTTo allow an easy access for the boiler maintenance, the
minimum recommended distance must be observed
High output condensing systemPower HT 45-150 kW
24
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
450 450 450
20 20
936,
5
436,5
186,
580
0
136,
5
(*) - The distance between the boilers in cascade varies from 450 mm to 20 mm depending on manifold accessory used. Flow/return manifolds squared 100x100 with flanges DN80 PN6
* *
High output condensing systemPower HT 45-150 kW
Technical drawings - graphs - flue systems
25
Technical drawings - graphs - flue systems
1.230 1.280 1.320
1.269 1.362 1.452Depth (A) mm
Power HT
Return
Flow
Flange
Flange
1000
100
10
10 11 100
POWER HT 1.230
POWER HT 1.280
POWER HT 1.320
FLOW RATE [m3/h]
WAT
ER S
IDE R
ESIS
TANC
E (m
bar)
EXCHANGER PRESSURE LOSSES
HEAT PRODUCTION ACCORDINGTO THE OUTDOOR TEMPERATURE
Outdoor temperature °C
Characteristic curve
Dew point = 54°CHeating flow
Heating return
Heat
ing w
ater
tem
pera
ture
EFFICIENCY OF THE BOILER ACCORDING TO THE OUTPUT
Output %
Effic
iency
%
High output condensing systemPower HT 230-320 kW
26
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
A B
1 Remove lower rear wall (2) of the Power HT
2 Remove the gas connection leading upward
and insert a 87°bend (1)
3 Turn 87°bend (1) in the desired position
(side or towards the rear)
4 Remove either the rear cover plate (3) or the
side cover plate (4)
5 Mount lower rear wall (2)
Side supply air connection (A)
1 Remove lower rear wall (3)
2 Remove the covering panel (2)
3 Mount the bend of the intake pipe (1)
4 Turn intake pipe elbow into the side position (1)
5 Mount lower rear wall (3)
Rear supply air connection (B)
1 Remove lower rear wall (2)
2 Take out cover plate (3)
3 Mount straight intake pipe
4 Mount lower rear wall (2)
Max lengths for the flue pipes with room air dependent working (type B installation)
These lengths are only for single boilersDecrease of the total lengths of the flue pipes:1 piece 87° bend: 5 m1 piece 45° bend: 2 m1 piece 15° bend: 1 m
Model Power HT 1.230 Power HT 1.280 Power HT 1.320
Flue pipe - ø mm 200 200 200
Max L. pipe inc. 87° bend mm 60 60 60
High output condensing systemPower HT 230-320 kW
Technical drawings - graphs - flue systems
27
Technical drawings - graphs - flue systems
Flue systemPower HT-A (430-650 kW)
Power HT-A (dimensions) 1.430 1.500 1.570 1.650
A mm 642 642 642 642
B mm 798 1009 1009 1009
C mm 442 540 540 540
D mm 1882 2192 2192 2192
E mm 709 1018 1018 1018
F mm 1526* 1526* 1526* 1526*
G mm 762 762 762 762
F
G
F
G
1.430 1.500 1.570
1.882 2.192 2.192
1.650
2.192Depth (D) mm
Power HT-A
0 5 10 15 20 25 30 35 40 45 50 550
50
100
150
200
250
300
350
400
450
500
550
600
FLOW RATE [m3/h]
WAT
ER S
IDE R
ESIS
TANC
E (m
bar)
EXCHANGER PRESSURE LOSSES
POWER HT-A 1.430
POWER HT-A 1.650
POWER HT-A 1.570
POWER HT-A 1.500
Heating return
Dew point = 54°C
Outdoor temperature °C
Heating flow
Heat
ing w
ater
tem
pera
ture
Characteristic curve
HEAT PRODUCTION ACCORDING TO THE OUTDOOR TEMPERATURE
EFFICIENCY OF THE BOILER ACCORDING TO THE OUTPUT
Output %
Effic
iency
%
* flue ducts and hydraulic pipes included
28
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
Coaxial flue system Luna Platinum
ExampleofinstallationwithhorizontalfluesystemØ60/100andØ80/125
InstallationexampleswithLASchimneyØ60/100andØ80/125
Verticalchimneyterminalforcoaxialfluesystem
InstallationexamplewithverticalcoaxialflueductsØ60/100andØ80/125
frontal view side view
450 345
KHG 714093910 .Reduction from Ø 80/125 to Ø 60/100
KHG 714093510 .Vertical chimney terminal for coaxial flue system Ø 60/100
Ø 126
130
50
Ø 60
Ø 100
Ø 81,5
Tubes maximumlength (m) Length reduction
for a 90° bend insertion (m)
Length reduction for a 45° bend
insertion (m)Ø 60/100 Ø 80/125
10 25 1 0,5
Technical drawings - graphs - flue systems
29
Technical drawings - graphs - flue systems
Dual flue system Luna Platinum
Exampleofinstallationwithverticaldualfluesystem Installationexamplewithhorizontaldualflueducts
Verticalchimneyterminalfordualfluesystem
frontal view frontal viewside view side view
KHG 714093810 .Dual flue pipes adapter for coaxial chimney (Ø 80/80 to Ø 80/125)
KHG 714093510 .Vertical chimney terminal Ø 80/125
Intake pipe maximum length: 15 m.
Ø 126
200
138
50
Ø 80
30
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
Flue system – Coaxial flue systemLuna Duo-tec MP
COAXIAL FLUE SYSTEMLunaDuo-tecMP1.50-1.60-1.70=Ø80/125mmLunaDuo-tecMP1.90-1.110=Ø110/160mm
DUAL FLUE SYSTEMLunaDuo-tecMP1.50-1.60-1.70=Ø80+80mmLunaDuo-tecMP1.90-1.110=Ø110+110mm
LunaDuo-tecMP–CoaxialfluesystemInstallationexamplewithcoaxialflueductsØ80/125(mod.1.50-1.60-1.70)andØ110/160(mod.1.90-1.110)
Type of ductTubes maximum
length(m)
Length reduction for a90° bendinsertion
(m)
Length reduction for a45° bend insertion
(m)
Ø chimney terminal(mm) Ø external duct
Coaxial Ø 110/160 mm 10 m 1 m 0,5 m 163 mm 160 mm
Vertical dual flue system 15 m 0,5 m 0,25 m 163 mm 110 mm
Coaxial Ø 85/125 mm 10 m 1 m 0,5 m 133 mm 125 mm
Vertical dual flue system 15 m 0,5 m 0,25 m 133 mm 80 mm
Horizontal dual flue system* 60 m 0,5 m 0,25 m - 80 mm
* intake pipe maximum length: 15 m.
Technical drawings - graphs - flue systems
31
Technical drawings - graphs - flue systems
Dual flue system
Installationexamplewithhorizontaldualflueducts
Exampleofinstallationwithverticaldualfluesystem
Luna Duo-tec MP 1.50 - 1.70 Luna Duo-tec MP 1.90 - 1.110
Intake pipe maximum length: 15 m
32
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
Flue system
Power HT (230-320 kW) – Flue/Intake pipes
These lengths are only for single boilersDecrease of the total lengths of the flue pipes: 1 piece 87° bend: 5 m - 1 piece 45° bend: 2 m - 1 piece 15° bend: 1 m
Power HT (45-150 kW) – Flue pipe
Model Tubes maximumlength (m)
Length reduction for a90° bend insertion (m)
Length reduction for a45° bend insertion (m)
HT 1.450 30 1 0,5HT 1.650 20 1 0,5HT 1.850 20 1 0,5HT 1.1000 20 1 0,5HT 1.1150 20 1 0,5HT 1.1200 20 1 0,5HT 1.1500 20 1 0,5
Power HT 1.230 Power HT 1.280 Power HT 1.320
Ø flue pipe mm 200 200 200Tube maximum length including 1 87° bend (m) mm 60 60 60
flow
return
flange DN 65
flange DN 65
Technical drawings - graphs - flue systems
33
Technical drawings - graphs - flue systems
These lengths are only for single boilersDecrease of the total lengths of the flue pipes: 1 piece 87° bend: 5 m - 1 piece 45° bend: 2 m - 1 piece 15° bend: 1 m
Power HT-A 1.430 Power HT-A 1.500 Power HT-A 1.570 Power HT-A 1.650
Ø flue pipe mm 250 250 250 250Tube maximum length including 1 87° bend (m) mm 50 50 50 50
Flue systemPower HT-A 430-650 kW - Flue / Intake pipes
Power HT-A 1.430 1.500 1.570 1.650
MR Heating flow Flange DN 80 PN 6
RR Heating return Flange DN 80 PN 6
Gas Gas outlet R2" external threaded
A Rear flue outlet (optional) DN 250
B Provided rear supply air connection nom. diam. 160
C Condensated water connection (right or left) DN 32
D Safety hydraulic group connection R¾" external threaded
E Safety valve connection R2" external threaded
F Provided top flue connection DN 250
G Side supply air inlet (optional) nom. diam. 160
A
B
G
E
F
R¾
D
C
34
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
Models: Luna Sat R2Z - RS2Z - RA2Z
Models: Luna Sat R/1 - RP/1 - RPB - RPE - RSP - RA
Model: Luna Sat RC
dimensions in mm
left side view
View from A
View from A
Screws seatsConnection tongues
Equiment of the case
Equiment of the case
Insert the final part of the pipes inside the case
Insert the final part of the pipes inside the case
sx
View from below
right side view left side view
450
42
6842
110
MR
RR
USC
1U
SC 2
USC
3
8570
7070
45
77 33 110
Upper view from A
Casing height 650
USC1 USC2
L of the casing 800
L of the casing 600
IPU
PESC
1ESC
2ESC
3
L of the casing 450
The holes for hydraulic connections are on all sides of the casing
Model: Luna Sat RH
Screws seats
Frontal view Left side view
Case width 150
L of
the
cas
e 65
0
Con
nect
ion
kit
30
The uprights of the centralized network can beintercepted also by lateral sides of the case
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
DHW CONSUMPTION METER CONNECTIONSESC1 : cold water inlet to first heat meter G 3/4 “ MESC2 : cold water inlet to second heat meter G 3/4 “ MESC3 : cold water inlet to third heat meter G 3/4 “ M
USC1: water outlet from first heat meter G 3/4 “ MUSC2: water outlet from second heat meter G 3/4 “ MUSC3: water outlet to third heat meter G 3/4 “ M
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
DHW CONSUMPTION METER CONNECTIONSES: Cold water inlet G 1/2 “ M ( RSP mod.)US: DHW outlet G 1/2 “ M ( RSP mod.)ESC1: cold water inlet to first heat meter G 3/4 “ MESC2 : cold water inlet to second heat meter G 3/4 “ M
CENTRALIZED SYSTEM CONNECTIONS- in case of high temperature zonesMRAT: high temperature zone G 1/2’’ M apartment flow RRAT: high temperature zone G 1/2’’ M apartment return
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
HEATING SYSTEM CONNECTIONS – BIZONE MODELSMRAT: high temperature zone G 3/4’’ M apartment flow MRBT: low temperature zone G 3/4’’ M apartment flow RRAT: high temperature zone G 3/4’’ M apartment return RRBT: low temperature zone G 3/4’’ M apartment return
DHW CONSUMPTION METER CONNECTIONSES: water inlet to the first heat meter G 1/2 “MUS: water outlet to the first heat meter G 1/2 “ MESC1 : cold water inlet to first heat meter G 3/4 “ MESC2 : cold water inlet to second heat meter G 3/4 “ M
AE: hole for cables
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATINGCONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
DHW CONSUMPTION METERCONNECTIONSESC1 : cold water inlet to first heat meter G 3/4 “ MESC2 : cold water inlet to second heat meter G 3/4 “ M
USC1: water outlet from first heat meter G 3/4 “ MUSC2: water outlet from second heat meter G 3/4 “ M
AE: hole for cables
left side viewFrontal view
Screws seats Connection tongues
dx
(A)
(A)
(A)
Frontal view
Luna Sat
Frontal view
Technical drawings - graphs - flue systems
35
Technical drawings - graphs - flue systems
Models: Luna Sat R2H
Models: Luna Sat RHG1
Frontal view
420
Screws seats
conn
ectio
n ki
t 14
4
872
327,
533
520
9,5
155,
5
conn
ectio
n ki
t 14
4
39,562,5
Left side view
Depth of the casing 150
Hei
ght
of t
he c
asin
g 85
0
Depth of the casing 150
H c
asse
tta
850
162,5
AEMR RR USC1 USC2
24140 57,5
73108
7742
70 70
162,5
24
AE
IP UP ESC1
ESC2
140 57,5
73108
7742
70 70
L of the casing 500
Models: Luna Sat RPEH
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
APARTMENT DHW CONNECTIONSUCS: DHW thermostatic outlet UFS: Cold water outletEFS: Cold water inlet
AE: hole for cables
CENTRALIZED SYSTEM CONNECTIONS IP1: heating inlet from the centralized system G 3/4’’ M UP1: heating outlet from the centralized system G 3/4’’ M IP2: cooling inlet from the centralized system G 3/4’’ M UP2: cooling outlet from the centralized system G 3/4’’ M
HEATING-COOLING APARTMENT CONNECTIONSMR1: heating apartment flow G 3/4 “ MRR1: heating apartment return G 3/4 “ MMR2: cooling apartment flow G 3/4 “ MRR2: cooling apartment return G 3/4 “ M
DHW CONSUMPTION METER CONNECTIONSESC1 : cold water inlet to first heat meter G 3/4 “ MESC2: cold water inlet to second heat meter G 3/4 “ MUSC1: water outlet from first heat meter G 3/4 “ MUSC2: water outlet from second heat meter G 3/4 “ M
AE: hole for cables
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 1’’ M apartment flowRR: heating G 1’’ M apartment return
DHW CONSUMPTION METER CONNECTIONSESC1 : cold water inlet to first heat meter G 3/4 “ or G 1’’ MESC2 : cold water inlet to second heat meter G 3/4 “ or G 1’’ MUSC1: water outlet from first heat meter G 3/4 “ or G 1’’ MUSC2: water outlet from second heat meter G 3/4 “ or G 1’’ M
AE: hole for cables
Internal view of the casing from B
External view of the case from B
Internal view of the case from B
External view of the casing from A
External view of the casing from A
Internal view of the casing from A
Screws seats
Connection tongues
Depth of the casing 150
Frontal view
Left side view
Screws seats
Left side viewFrontal view
L of the casing 800
L of the casing 600
(A)
(A)
(B)
(A)
(B)
(B)Equiment of the case
Insert the final part of the pipes inside the case
Insert the final part of the pipes inside the casing
36
Technical drawings - graphs - flue systems Technical drawings - graphs - flue systems
Model: Luna Sat R60WH
Model: Luna Sat RST
Frontal view
Frontal view
View from left side
View from left side
View from below
L of the box 150
L of the casing 600
Cas
e he
ight
850
View from below
Upper view
Upper view
Model: Luna Sat RP-SP
450
50
MR RR US UPVS
IP ES
65 65 7537,5
70 65 60
425
910
48 33
821
Ø 8
= =
2 holes for screws
Frontal view
450 473
View from left side
910
Sedi per viti
IP UP
MRAE
123 65 411
8565
48 6065 65 65 1386594
6585
29
4675
646
RR
V
Alette aggancio
Model: Luna Sat RH1without casing
Model: Luna Sat RPHwithout casing
IP UP
ESC2
USC2
RRMR
ESC1
USC1
H=8
46 m
in.
120
120
238
38
L 400 min.
76,5
70
38
85 50
292
16,5
70
352
235
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
DHW CONSUMPTION METER CONNECTIONSESC1 : cold water inlet to first heat meter G 3/4 “ MESC2 : cold water inlet to second heat meter G 3/4 “ M
USC1: water outlet from first heat meter G 3/4 “ MUSC2: water outlet from second heat meter G 3/4 “ M
AE: hole for cables
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
DHW CONSUMPTION METER CONNECTIONSESC1 : cold water inlet to first heat meter G 3/4 “ MESC2 : cold water inlet to second heat meter G 3/4 “ MUSC1: water outlet from first heat meter G 3/4 “ MUSC2: water outlet from second heat meter G 3/4 “ M
AE: hole for cables
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
APARTMENT DHW CONNECTIONSUFS: Cold water outlet G3/4’’ MEFS: Cold water inlet G3/4’’ MESC: hot water inlet G3/4’’ MUSC: hot water outlet G3/4’’ M
AE: hole for cablesV: safety valve discharge
ES : Cold water inlet G 1/2 “ M US: DHW outlet G 1/2 “ M IP : Primary inlet G3/4’’ MUP: Primary outlet G3/4’’M MR: heating G 3/4’’ M flowRR: heating G 3/4’’ M returnVS: safety valve discharge
CENTRALIZED SYSTEM CONNECTIONSIP : Primary inlet from centralized system G3/4’’ MUP: Primary outlet to centralized system G3/4’’M
APARTMENT SIDE HEATING CONNECTIONS-MONOZONE MODELSMR: heating G 3/4’’ M apartment flowRR: heating G 3/4’’ M apartment return
APARTMENT DHW CONNECTIONSUCS: DHW thermostatic outlet UFS: Cold water outletEFS: Cold water inlet
AE: hole for cables
USC ESC UFS EFS
L of the casing 600
Screws seats
Connection kit
Connection kit
Connection kit
Technical drawings - graphs - flue systems
37
Technical drawings - graphs - flue systems
Accessories for high output condensing systems Flue Systems - Coaxial flue 38 - Dual flue 39 - Flue accessories for cascade installation 43 - Flexible ducting system 44 Hydraulic accessories 44 Thermoregulation accessories 48 Accessories available as option for Luna SAT 51
37
38
Coaxial flue system: Luna Platinum
Coaxial flue system: Luna Duo-Tec MP 50-70 kW
Description Code
Description Code
Description Code
PP coaxial flue pipes with terminal Ø 60/100 L=750 mmsupplied with windproof terminal and sealing collar KHG 714059613 •
PP coaxial flue pipe extension Ø 60/100 L=1000 mm KHG 714059516 •
PP coaxial flue pipe extension Ø 60/100 L=500 mm KHG 714119810 •
PP coaxial 90° bend - Ø 60/100 KHG 714059717 •
PP coaxial 45° bend - Ø 60/100 KHG 714059817 •
Internal sealing collar Ø 100 KHG 714017710 •
PP vertical chimney terminal Ø 80/125(1) KHG 714093510 •
PP reduction from Ø 80/125 to 60/100 KHG 714093910 •
Flat roof tile to be used with a vertical chimney terminal Ø 80/125 KHG 714093610 •
Pitched roof tile to be used with a vertical chimney terminalØ 80/125; it is adjustable from 15° to 45° KHG 714093711 •
PP vertical chimney terminal Ø 80/125 KHG 714093510 •
Flat roof tile to be used with a vertical chimney terminal Ø 80/125 KHG 714093610 •
Pitched roof tile to be used with a vertical chimney terminalØ 80/125; it is adjustable from 15° to 45° KHG 714093711 •
PP coaxial flue pipe with terminal Ø 80/125 L=1000 mmsupplied with wind proof terminal and sealing collar KHG 714088910 •
PP coaxial flue pipe extension Ø 80/125 L=1000 mm KHG 714088511 •
PP coaxial flue pipe extension Ø 80/125 L=500 mm KHG 714088610 •
PP coaxial 90° bend - Ø 80/125 KHG 714088711 •
PP coaxial 45° bend - Ø 80/125 KHG 714088811 •
(1) +KHG 714093910 •
Flue pipe accessories
Coaxial flue system: Luna Platinum - Luna Duo-Tec MP 50-70 kW
39
Flue pipe accessories
Coaxial flue system: Luna Duo-Tec MP 90-110 kW
Description Code
PP coaxial flue pipe extension Ø 110/160 L=1000 mm KUG 714133810 •
PP coaxial flue pipe extension Ø 110/160 L=500 mm KUG 714133710 •
PP coaxial 90° bend - Ø 110/160 KUG 714133610 •
PP coaxial 45° bend - Ø 110/160 KUG 714133510 •
PP vertical chimney terminal Ø 110/160 KUG 714133410 •
PP horizontal coaxial chimney Ø 110/160 KUG 714133310 •
Flat roof tile to be used with a verticalchimney terminal Ø 110/160 KHG 714104810 •
Pitched roof tile to be used with a vertical chimney terminalØ 110/160; it is adjustable from 15° to 45° KHG 714104910 •
Dual flue system: Luna Platinum
Description Code
Orientable dual flue system 710268902 •
PP dual flue system Ø 80 it includes: flue reduction,intake connection KHG 714059113 •
PP vertical flue system B23 type installation KHG 714111011 •
PP pipe extension Ø 80 L=1000 mm KHG 714059411 •
PP pipe extension Ø 80 L=500 mm KHG 714059910 •
PP pipe extension Ø 80 L=250 mm 710718301 •
PP 90° bend Ø 80 KHG 714059211 •
PP 45° bend Ø 80 KHG 714059311 •
Dual flue terminal Ø 80 KHG 714010410 •
PP reduction from Ø 80 to Ø 60 KHG 714075610 •
PP pipe extension Ø 60 L=1000 mm KHG 714075310 •
PP pipe extension Ø 60 L=500 mm KHG 714075210 •
PP 90° bend Ø 60 KHG 714075410 •
PP 45° bend Ø 60 KHG 714075510 •
40
Flue pipe accessories
Dual flue system: Luna Platinum
Description Code
Dual flue terminal Ø 60 KHG 714037210 •
Pipe Ø 80 centring kit (pack of 5) KHG 714037411 •
Clamp centring kit Ø 80 KHG 714106110 •
Pipe Ø 80 supporting bracket (pack of 5) KHG 714037310 •
Internal sealing collar Ø 80 KHG 714018510 •
External sealing collar Ø 80 KHG 714018411 •
Coaxial vertical chimney terminal Ø 80/125(1) KHG 714093510 •
Dual flue pipes adapter for coaxial chimney Ø 80/125 KHG 714093810 •
Flat roof tile Ø 125 to be used with a vertical chimney terminal KHG 714093610 •
Pitched roof tile Ø 125 to be used with a vertical chimneyterminal; it is adjustable from 15° to 45° KHG 714093711 •
Dual flue system: Luna Duo-Tec MP 50-70 kW - floor standing boilers Power HT 45-65 kW
Description Code
PP pipe extension Ø 80 L=1000 mm KHG 714059411 •
PP pipe extension Ø 80 L=500 mm KHG 714059910 •
PP pipe extension Ø 80 L=250 mm 710718301 •
PP 90° bend Ø 80 KHG 714059211 •
PP 45° bend Ø 80 KHG 714059311 •
Pipe Ø 80 centring kit (pack of 5) KHG 714037411 •
Clamp centring kit Ø 80 KHG 714106110 •
Pipe Ø 80 supporting bracket (pack of 5) KHG 714037310 •
Internal sealing collar Ø 80 KHG 714018510 •
External sealing collar Ø 80 KHG 714018411 •
Flue terminal Ø 80 LSD 790000150 •
Dual flue terminal Ø 80 KHG 714010410 •
(1) +KHG 714093810 •
41
Flue pipe accessories
Dual flue system: Luna Duo-Tec MP 50-70 kW
Description Code
PP dual flue system Ø 80 it includes: flue reduction,intake connection KHG 714089010 •
Coaxial vertical chimney terminal 80/125 KHG 714093510 •
Dual flue pipes adapter for coaxial chimney Ø 80/125 KHG 714093810 •
Flat roof tile Ø 125 to be used with a vertical chimney terminal KHG 714093610 •
Pitched roof tile Ø 125 to be used with a vertical chimney terminal; it is adjustable from 15° to 45° KHG 714093711 •
Dual flue system: Luna Duo-Tec MP 90-110 kW
Dual flue system: Luna Duo-Tec MP 90-110 kW - floor standing boilers Power HT 85-150 kW
(1) only for floor standing boilers 85-150 kW
Description Code
PP dual flue kit Ø 110/110 710631401 •
Description Code
PP pipe extension Ø 110 L=1000 mm KUG 714133210 •
PP pipe extension Ø 110 L=500 mm KUG 714133110 •
PP pipe extension Ø 110 L=250mm 710718501 •
PP 90° bend Ø 110 KUG 714133010 •
PP 45° bend Ø 110 KUG 714132910 •
PP reduction kit from Ø 110 to Ø 100(1) KHW 714096910 •
PP vertical chimney terminal Ø 110 KUG 714132810 •
PP horizontal chimney terminal Ø 110 KUG 714132710 •
Flat roof tile to be used with a vertical chimneyterminal Ø 110/160 KHG 714104810 •
Pitched roof tile to be used with a vertical chimney terminal110/160; it is adjustable from 15° to 45° KHG 714104910 •
Dual flue system: floor standing boilers Power HT 45-150 kW
Description Code
Room air indipendent kit ( R.A.I.) Ø 80 for 45-65 kW boilers LSB 710000100 •
Room air indipendent kit ( R.A.I.) Ø 100 for 85-100 kW boilers LSB 710000110 •
Room air indipendent kit ( R.A.I.) Ø 100 for 120-150 kW boilers LSB 710000120 •
42
Flue pipe accessories
Dual flue system: floor standing boilers Power HT 230-320 kW
Descrizione Codice
Extension pipe Ø 200 L=500 mm LXO 000971911 •
Extension pipe Ø 200 L=1000 mm LXO 000971928 •
Extension pipe Ø 200 L=2000 mm LXO 000971935 •
87° bend Ø 200 LXO 000971942 •
45° bend Ø 200 LXO 000971959 •
Spacer Ø 200 LXO 000971973 •
Pitched roof tile Ø 200 LXO 000971997 •
SAS flue discharge 200-1B LXO 000688673 •
SAS flue discharge 200-2B LXO 000688680 •
Air grid Ø 200 LXO 000971980 •
87° bend Ø 200 with inspection LXO 000971904 •
Up right duct with inspection hole LXO 000971898 •
SAS vertical chimney terminal Ø 200 LXO 000989527 •
Passing roof Ø 200 LXO 000989497 •
Comburent air filter LXO 000692656 •
Room air indipendent working (WAS 200) LXO 000971881 •
43
Flue accessories for cascade installation (for all boilers model, except for floor standing boilers Power HT 230-320 kW)
Description Code
PP flue pipe kit Ø 160 for two boilers 710715201 •
PP flue pipe kit Ø 200 for two boilers 710715601 •
PP flue pipe kit Ø160 for the third boiler 710716301 •
PP flue pipe kit Ø200 for the third boiler 710716401 •
PP 87° bend Ø160 KHW 714097810 •
PP 87° bend Ø200 KHW 714098210 •
PP pipe extension Ø160 L=1000 mm KHW 714097710 •
PP pipe extension Ø200 L=1000 mm KHW 714098110 •
Flue accessories for cascade installation: Luna Platinum - Luna Duo-tec MP 50-70 kW - floor standing boilers Power HT 45-65 kW
Description Code
PP flue pipe kit for two boilers Ø 125 710716801 •
PP flue pipe kit Ø125 for the third boiler 710717701 •
PP shutter kit Ø 110/80 with condensing trap 710682001 •
PP 90° bend Ø 125 KHG 714094410 •
PP 45° bend Ø 125 (pack of 2) KHG 714094510 •
PP pipe extension Ø 125 L=1000 KHG 714094610 •
Flue accessories for cascade installation: Luna Platinum - Luna Duo-tec MP 90-110 kW - floor standing boilers 85-150 kW
Flue accessories for cascade installation: floor standing boilers Power HT 230-320 kW
Description Code
Description Code
PP shutter kit Ø 110/110 with condensing trap 710682101 •
Manifold for 2 boilers in cascade 250 mm LXO 000691444 •
Flue accessories for cascade installation: floor standing boilers Power HT 85-150 kW
Description Code
PP reduction kit from Ø 110 to Ø 100 KHW 714096910 •
Flue pipe accessories
44
Description Codice
Manifold pipes for 2 Platinum boilers in cascade- right connection ( with safety device) KHG 714117312 •
Manifold pipes for the 3rd Platinum boiler in cascade- right connection ( with safety device) KHG 714117411 •
Manifold pipes for 2 Platinum boilers in cascade- left connection ( with safety device) KHG 714117512 •
Manifold pipes for the 3rd Platinum boiler in cascade- left connection ( with safety device) KHG 714117611 •
Neutralizer kit for wall hung boilers up to 100 kW KHG 714125610 •
Recharge for neutralizer kit for wall-hung boilers up to 100 kW KHG 714135310 •
Heating systems taps and connection pipes with filter 710931401 •
Flue pipe accessories
Flexible ducting system accessories: wall hung - floor standing boilers 45-65 kW
Description Code
PP flexible pipe Ø 80 L= 1,5 m KHG 714105710 •
PP flexible pipe Ø 80 L= 20 m KHG 714105810 •
PP tee joint Ø 80 with supporting bracket and condensate drainings KHG 714105910 •
PP 90° bend Ø 80 with supporting bracket KHG 714106010 •
Flexible centring kit Ø 80 (pack of 3) KHG 714106210 •
Triple lips gaskets kit Ø 80 (pack of 5) KHG 714111210 •
Hydraulic accessories (WITHOUT SAFETY DEvICE): Luna Platinum
Description Code
Manifold pipes for 2 Platinum boilers in cascade KHG 714117111 •
Manifold pipes for the 3rd Platinum boiler in cascade KHG 714117211 •
Neutralizer kit for wall hung boilers up to 100 kW KHG 714125610 •
Recharge for neutralizer kit for wall-hung boilers up to 100 kW KHG 714135310 •
Heating systems taps and connection pipes with filter 710931401 •
Hydraulic accessories (WITH SAFETY DEvICE): Luna Platinum
45
Hydraulic accessories (WITHOUT SAFETY DEvICE): Luna Duo-tec MP single installation
Hydraulic accessories (WITHOUT SAFETY DEvICE): Luna Duo-tec MP for boilers in cascade
Hydraulic accessories (WITHOUT SAFETY DEvICE): Luna Duo-tec MP for boilers in cascade
Single installation for Luna Duo-tec MP from 50 to 70 kW
Single installation for Luna Duo-tec MP from 90 to 110 kW
Boilers in cascade from 50 to 70 kW Coden° of boilers
2 3 4 5
Gas delivery/return manifold kit for individual boiler 50 to 70 kW 710577501 • - 1 pz - 1 pz
Gas delivery/return manifold kit for two boilers 50 to 70 kW 710577701 • 1 pz 1 pz 2 pz 2 pz
Delivery-return-manifolds kit for individual boiler 50 to 70 kW without gas line 710886301 • - 1 pz - 1 pz
Delivery-return-manifolds kit for 2 boilers 50 to 70 kW without gas line 710886501 • 1 pz 1 pz 2 pz 2 pz
Expansion tank connection kit 710583802 • 2 pz 3 pz 4 pz 5 pz
Boiler-manifold connection kit for boilers 50 to 70 kW 710673801 • 2 pz 3 pz 4 pz 5 pz
Boiler-manifold kit for boilers 50 to 70 kW without gas line 710886101 • 2 pz 3 pz 4 pz 5 pz
Flanges and gaskets kit 710582702 • 1 pz 1 pz 1 pz 1 pz
Gas manifolds connection kit for cascade systems 710583201 • - 1 pz 1 pz 2 pz
Insulation kit for individual boiler flow/return manifolds 50 to 70 kW 710587002 • - 1 pz - 1 pz
Insulation kit for two boilers flow/return manifolds 50 to 70 kW 710587502 • 1 pz 1 pz 2 pz 2 pz
Boilers in cascade from 90 to 110 kW Coden° of boilers
2 3 4 5
Gas delivery/return manifold kit for individual boiler 90 to 110 kW 710584601 • - 1 pz - 1 pz
Gas delivery/return manifold kit for two boilers 90 to 110 kW 710584901 • 1 pz 1 pz 2 pz 2 pz
Delivery-return-manifolds kit for individual boiler 90-110 kW without gas line 710886401 • - 1 pz - 1 pz
Delivery-return-manifolds kit for 2 boilers 90-110 kW without gas line 710886601 • 1 pz 1 pz 2 pz 2 pz
Expansion tank connection kit 710583802 • 2 pz 3 pz 4 pz 5 pz
Boiler-manifold connection kit for boilers 90 to 110 kW 710678301 • 2 pz 3 pz 4 pz 5 pz
Boiler-manifold kit for boilers 90-110 kW without gas line 710886201 • 2 pz 3 pz 4 pz 5 pz
Flanges and gaskets kit 710582702 • 1 pz 1 pz 1 pz 1 pz
Gas manifolds connection kit for cascade systems 710583201 • - 1 pz 1 pz 2 pz
Insulation kit for individual boiler flow/return manifolds 90 to 110 kW 710587802 • - 1 pz - 1 pz
Insulation kit for two boilers flow/return manifolds 90 to 110 kW 710588502 • 1 pz 1 pz 2 pz 2 pz
Code
Hydraulic kit with separator for a single boiler from 50 to 70 kW 71163301 •
Code
Gas delivery/return manifold kit for individual boiler 90-110 kW 710584601 •
Boiler-mainfold connection kit for 90 - 110 kW boilers 710678301 •
Expansion tank connection kit 710583802 •
Flanges and gaskets kit 710582702 •
Insulation kit for individual boiler flow/return manifolds 90 - 110 kW boilers 710587802 •
46
Hydraulic accessories (WITH SAFETY DEvICE): Luna Duo-tec MP single installation
Hydraulic accessories (WITH SAFETY DEvICE): Luna Duo-tec MP for boilers in cascade
Hydraulic accessories (WITH SAFETY DEvICE): Luna Duo-tec MP for boilers in cascade
Single installation for Luna Duo-tec MP from 50 to 70 kW
Single installation for Luna Duo-tec MP 90 - 110 kW
Boilers in cascade from 50 to 70 kW Coden° of boilers
2 3 4 5
Gas delivery/return manifold kit for individual boiler 50 to 70 kW 710577501 • - 1 pz - 1 pzGas delivery/return manifold kit for two boilers 50 to 70 kW 710577701 • 1 pz 1 pz 2 pz 2 pzDelivery-return-manifolds kit for individual boiler 50 to 70 kW without gas line 710886301 • - 1 pz - 1 pzDelivery-return-manifolds kit for 2 boilers 50 to 70 kW without gas line 710886501 • 1 pz 1 pz 2 pz 2 pzExpansion tank connection kit 710583802 • 2 pz 3 pz 4 pz 5 pzBoiler-manifold connection kit for boilers 50 to 70 kW 710673801 • 2 pz 3 pz 4 pz 5 pzBoiler-manifold kit for boilers 50 to 70 kW without gas line 710886101 • 2 pz 3 pz 4 pz 5 pzFlanges and gaskets kit 710582702 • 1 pz 1 pz 1 pz 1 pzGas manifolds connection kit for cascade systems 710583201 • - 1 pz 1 pz 2 pzInsulation kit for individual boiler flow/return manifolds 50 to 70 kW 710587002 • - 1 pz - 1 pzInsulation kit for two boilers flow/return manifolds 50 to 70 kW 710587502 • 1 pz 1 pz 2 pz 2 pzHydraulic safety devices kit (to be placed in the hydraulic separator connection kit) KHW 714098411 • 1 pz 1 pz 1 pz 1 pz
Boilers in cascade from 90 to 110 kW Coden° of boilers
2 3 4 5
Gas delivery/return manifold kit for individual boiler 90 to 110 kW 710584601 • - 1 pz - 1 pzGas delivery/return manifold kit for two boilers 90 to 110 kW 710584901 • 1 pz 1 pz 2 pz 2 pzDelivery-return-manifolds kit for individual boiler 90-110 kW without gas line 710886401 • - 1 pz - 1 pzDelivery-return-manifolds kit for 2 boilers 90-110 kW without gas line 710886601 • 1 pz 1 pz 2 pz 2 pzExpansion tank connection kit 710583802 • 2 pz 3 pz 4 pz 5 pzBoiler-manifold connection kit for boilers 90 to 110 kW 710678301 • 2 pz 3 pz 4 pz 5 pzBoiler-manifold kit for boilers 90-110 kW without gas line 710886201 • 2 pz 3 pz 4 pz 5 pzFlanges and gaskets kit 710582702 • 1 pz 1 pz 1 pz 1 pzGas manifolds connection kit for cascade systems 710583201 • - 1 pz 1 pz 2 pzInsulation kit for individual boiler flow/return manifolds 90 to 110 kW 710587802 • - 1 pz - 1 pzInsulation kit for two boilers flow/return manifolds 90 to 110 kW 710588502 • 1 pz 1 pz 2 pz 2 pzHydraulic safety devices kit (to be placed in the hydraulic separator connection kit) KHW 714098411 • 1 pz 1 pz 1 pz 1 pz
Code
Hydraulic kit with separator for a single boiler from 50 to 70 kW 71163201 •
Code
Gas delivery/return manifold kit for individual boiler 90-110 kW 710584601 •Boiler-mainfold connection kit for 90 - 110 kW boilers 710678301 •Expansion tank connection kit 710583802 •Flanges and gaskets kit 710582702 •Insulation kit for individual boiler flow/return manifolds 90 - 110 kW boilers 710587802 •Hydraulic safety devices kit (to be placed in the hydraulic separator connection kit) KHW 714098411 •
Hydraulic accessories (WITHOUT SAFETY DEvICE): Luna Duo-tec MP for boilers in cascadeHydraulic separators
Code
Connection to hydraulic separator kit 8,5 m3/h 710686501 •manifolds insulation kit for 8,5 m3/h hydr. separator 710687901 •Screws and gaskets for 8,5 m3/h hydr. separator LSD 790000440 •Hydraulic separator HS 8,5 of 8,5 m3/h - 2“ threaded connectors LSD 790000310 •
Connection to hydraulic separator kit 18 m3/h DN65 710687501 •Manifolds insulation kit for 18 m3/h DN65 hydraulic separator 710688901 •Screws and gaskets for 18 m3/h DN65 hydr. separator LSD 790000430 •Hydraulic separator 18 m3/h DN65 LSD 790000320 •
Connection to hydraulic separator kit 28 m3/h DN80 710687601 •Manifolds insulation kit for 28 m3/h DN80 hydraulic separator 710689201 •Screws and gaskets for 28 m3/h DN80 hydr. separator LSD 790000420 •Hydraulic separator 28 m3/h DN80 LSD 790000330 •
47
Hydraulic accessories: Luna Duo-tec MP Description Code
Hydraulic safety devices kit (available as optional) KHW 714098411 •
Neutralizer kit for wall hung boilers up to 100 kW KHG 714125610 •
Recharge for neutralizer kit for wall-hung boilers up to 100 kW KHG 714135310 •
Hydraulic separator HS 56 of 56 m³/h - Ø 100 flanged connectors LSD 790000340 •
Neutralizer kit for wall hung boilers up to 350 kW KHG 714125710 •
Recharge for neutralizer kit for wall-hung boilers up to 350 kW KHG 714135410 •
Hydraulic accessories (WITH SAFETY DEvICE): Luna Duo-tec MP for boilers in cascadeHydraulic separators
Code
Connection to hydraulic separator kit 8,5 m3/h (with safety devices connections) 710578401 •
manifolds insulation kit for 8,5 m3/h hydr. separator 710640601 •
Screws and gaskets for 8,5 m3/h hydr. separator LSD 790000440 •
Hydraulic separator HS 8,5 of 8,5 m3/h - 2” threaded connectors LSD 790000310 •
Connection to hydraulic separator kit 18 m3/h DN65 (with safety devices connections) 710579001 •
Manifolds insulation kit for 18 m3/h DN65 hydraulic separator 710642201 •
Screws and gaskets for 18 m3/h DN65 hydr. separator LSD 790000430 •
Hydraulic separator 18 m3/h DN65 LSD 790000320 •
Connection to hydraulic separator kit 28 m3/h DN80 (with safety devices connections) 710579301 •
Manifolds insulation kit for 28 m3/h DN80 hydraulic separator 710642801 •
Screws and gaskets for 28 m3/h DN80 hydr. separator LSD 790000420 •
Hydraulic separator 28 m3/h DN80 LSD 790000330 •
Description Code
Brazed exchanger 50- 100kW 711261001 •
Brazed exchanger 50- 100kW 711261101 •
23P inspectable exchanger 200kW 711196001 •
27P inspectable exchanger 250kW 711196101 •
33P inspectable exchanger 300kW 711196201 •
37P inspectable exchanger 350kW 711196301 •
41P inspectable exchanger 400kW 711196401 •
Safety devices manifold kit LSD 790000580 •
Manifold kit L=495 LSD 790000120 •
Hydraulicaccessories:LunaDuo-tecMP50-110kW-floorstandingboilersPower HT45-430 kW
48
Description Code
Mixing valve motor KHG 714078511 •
Mixing valve G1” KHG 714078310 •
Mixing valve G1/2” KHG 714078610 •
Mixing valve G3/4” KHG 714078710 •
Flow/return sensor for controller for boilersin cascade and mixing system KHG 714078810 •
Flow sensor for clip-in module KHG 714078910 •
Hot water temperature sensor KHG 714076810 •
Description Code
Outdoor sensor THINK 710487302 •
Outdoor sensor THINK (wireless)* 710302701 •
Interface kit for remote control THINK - 3 leds 710234003 •
Interface kit for remote control THINK - 5 leds wireless 710244103 •
Wireless aerial THINK 710234302 •
Accessories for the thermoregulation, programming, setting and digital control - Luna Platinum - Luna Duo-tec MP - floorstandingboilersPowerHT45-150kW
Accessories for the thermoregulation, programming, settingand digital control - Luna Platinum
* wireless model to be ordered with the interface kit for remote control THINK - 5 leds (710244103 •) or the wireless aerial THINK (710234302 •)
Hydraulicaccessories:floorstandingboilersPowerHT45-150kW
Hydraulic accessories for twin boilers in cascade Power HT 230-320
Description Code
Manifold pipes single boiler/last boiler KHW 714104210 •
Boiler-manifold pipe hydraulic connection KHW 714104311 •
Manifold pipes boilers in cascade (45 cm between the boilers) KHW 714099010 •
Manifold pipes boilers in cascade (2 cm between the boilers) KHW 714103611 •
Hydraulic connection for 2nd pump (1) KHW 714098612 •
Pump for hydraulic connection accessories 711187201 •
Description Code
Connection kit 2 boilers in cascade KB1 – mod. HT 1.230 LXO000692632 •
Connection kit 2 boilers in cascade KB2– mod. HT 1.280-1.320 LXO000692649 •
(1) the pump for hydraulic connection accessories is compulsory (711187201 •)
49
Description Code
Room thermostat THINK 710106106 •
Room thermostat (wireless) THINK* 710304405 •
Room thermostat with timer THINK 710298006 •
Room thermostat with timer THINK – wireless* 710297905 •
Programmable clip-in module THINK 710034504 •
Flow sensor for clip-in module THINK KHG 714078910 •
Programmable external module THINK 710503705 •
Hot water temperature sensor KHG 714076810 •
Interface kit for boilers in cascade THINK 710440803 •
Climate controller kit for mixing zones THINK 710519903 •
Sensor for solar controller LNC 710000040 •
Description Code
Outdoor sensor THINK 710487302 •
Outdoor sensor THINK (wireless)* 710302701 •
Wireless aerial THINK 710234302 •
Programmable clip-in module THINK 710034504 •
Programmable external module THINK 710503705 •
Hot water temperature sensor KHG 714076810 •
Remote control THINK 710244203 •
Remote control THINK (wireless) 710244303 •
Climate controller kit for mixing zones THINK 710519903 •
Interface kit for boilers in cascade THINK 710440803 •
Sensor for solar controller LNC 710000040 •
* wireless model to be ordered with the interface kit for remote control THINK - 5 leds (710244103 •) or the wireless aerial THINK (710234302 •)
Accessories for the thermoregulation, programming, setting and digital control - Luna Platinum
Accessories for the thermoregulation, programming, setting and digital control - Luna Duo-tec MP
50
Description Code
Outdoor sensor 710487302 •
Remote controller and climatic regulator KHG 714072612 •
Boiler interface for mixing systems with two different temperatures zones KHG 714077913 •
Bus interface for climatic regulators for boilers in cascade KHG 714078013 •
Boiler control interface 0-10 V KHG 714107612 •
Temperature regulator for mixing systems, it includes a temperature sensor KHG 714078112 •
Cascade controller, it includes a temperature sensor KHG 714078212 •
Room sensor: it can be installed only with climatic regulator for mixing system KHG 714078410 •
Installation box for RVA controllers KHG 714096610 •
Hot water temperature sensor for climatic regulator for boilers in cascade KHG 714079010 •
Description Code
Outdoor sensor THINK 710487302 •
Interface kit for boilers in cascade 710440803 •
External tank sensor L=2 m LSX 710000010 •
External tank sensor L=6 m LSX 710000020 •
Accessory for managing mixing systems or solar panels LSX 710000030 •
Climate controller kit for mixing zones THINK 710519903 •
Description Code
LPG conversion kit for LUNA DUO-TEC MP 1.50 710718603 •
LPG conversion kit for LUNA DUO-TEC MP 1.60 710718702 •
LPG conversion kit for LUNA DUO-TEC MP 1.70 710718802 •
LPG conversion kit for LUNA DUO-TEC MP 1.90 710718902 •
LPG conversion kit for LUNA DUO-TEC MP 1.110 710719002 •
Accessories for the thermoregulation, programming, settinganddigitalcontrol-floorstandingboilers45-150kW
Accessories for the thermoregulation, programming, settinganddigitalcontrol-floorstandingboilers230-320kW
LPG conversion kit: Luna Duo-tec MP
51
M-BUS controlFirst flow meter - mod. R/1-MB, RP/1-MB, R2Z-MB - RPE-MB, RPB - MB KSV 714116410 • First flow meter - mod. RS-MB, RSP-MB, RS2Z-MB KSV 714116510 • First or second flow meter - mod. RH-MB, RH1-MB, R2H-MB KSV 714116610 • First or second flow meter - mod. RPH-MB KSV 714116710 • Second flow meter - mod. RP/1-MB KSV 714118210 • Second flow meter - mod. R/1-MB, R2Z-MB - RPE-MB, RPB-MB KSV 714118310 • First or second flow meter RHG1-MB 1’’ KSV 714125010 • First or second flow meter RHG1-MB 3/4’’ KSV 714125210 • M-BUS flow meter - Luna Sat RC-MB KSV 714134310 •
Code
WIRELESS controlFirst flow meter - mod. R/1-RP/1-R2Z - RPE - RPB KSV 714102511 • First flow meter - mod. RS-RSP-RS2Z KSV 714102611 • Second flow meter - mod. RP/1 KSV 714106312 • Second flow meter - mod. R/1-R2Z - RPE - RPB KSV 714110111 • Flow meter - mod. RA-RA2Z KSV 714110011 • First or second flow meter - mod. RH -RH1- R2H KSV 714114511 • First or second flow meter - mod. RPH KSV 714114611 • First or second flow meter RHG1 1’’ KSV 714124910 • First or second flow meter RHG1 3/4’’ KSV 714125111 • Flow meter - Luna Sat RC KSV 714131310 •
Code
ThermoregulationOutdoor sensor 710487302 • Room thermostat (RT) KHG 714062810 • Remote control and chronostat (mod. R2Z, RS, RSP, RS2Z, RA, RA2Z, RPE, RPEH - wireless and M-BUS) KSV 714109511 • Digital chronostat (mod. R/1, RP1) KHG 714086711 •
Code
Accessories available as optionLuna SAT
WIRELESS data transmissionNetwork node KSV 714102711 • Network node with gateway KSV 714103011 • Network node with gateway for transmission via GSM KSV 714102811 • Remote reader device KSV 714102911 • Software ACS 26 KSV 714108611 • Connecting cable PC-network node for network note with gateway KSV 714116110 • Wireless impulse adaptor AEW36.2 KSV 714117710 •
Code
M-BUS data transmissionImpulse adaptor AEW 310.2 M-BUS KSV 714116210 • Connection cable heat meter M-BUS KSV 714116310 • M-BUS central unit made of 250 loads KSV 714136910 • M-BUS central unit made of 120 loads KSV 714137010 • M-BUS central unit made of 60 loads KSV 714137110 • M-BUS central unit made of 20 loads KSV 714137210 • M-BUS central unit made of 60 loads for GSM transmission, e-mail KSV714146510 •Extension to 120 loads for GSM central unit, e-mail KSV714146610 •Extension to 250 loads for GSM central unit, e-mail KSV714146710 •Software for local reading of the GSM central unit, e-mail KSV714146810 •
Code
52
Accessories available as optionLuna SAT
Heat meter UH50 G1 ¼’’ KSV 714117810 • Heat meter UH50 G2’’ KSV 714117910 • Heat meter UH50 G1’’ KSV 714144810 •Heat meter UH50 DN 50 KSV 714144910 •Heat meter UH50 DN 65 KSV 714145010 •Heat meter UH50 DN 80 KSV 714145110 •Wireless interface UH50 for ultrasonic heat-meter KSV 714121710 • Well for NTC sensor (½” and ¾”) for UH50 KSV 714127310 • Well for NTC sensor G1/2’’ for UH50 models DN50-DN60-DN80 (output up to 6 m3/h) KSV 714146910 •Additional well for NTC sensor G 1/2” for UHG50 models G2” DN50-DN65-DN80 (output up to 10 m3/h) KSV 714127410 • M-BUS interface UH50 for ultrasonic heat-meter KSV 714121810 • Complete template for Luna Sat RH1 KSV 714122310 • By-pass for Luna Sat RC KSV 714136310 • By-pass ( inversione) for Luna Sat RC KSV 714139610 •Heating hydraulic proof for Luna Sat RC KSV 714136410 • Sanitary hydraulic proof for Luna Sat RC KSV 714136510 • 2L Sanitary expansion vessel for Luna Sat R60WH KSV 714110410 •4L Sanitary expansion vessel (Luna Sat B60) KSV 714110410 •GSM modem for DIN frame KSV 714140810 •
Code
Equipment (for all wireless/M-BUS models)(to be ordered for RH model)
Other accessories
Hydraulic equipment for Luna Sat heating only models R/1, RP/1, RH, RH1, RPH, RPB, RPE, R2H (x2), RPEH KSV 714120911 • Hydraulic equipment for Luna Sat heating and DHW production model RS, RSP KSV 714121011 • Hydraulic equipment for Luna Sat models R2Z, RA, RA2Z KSV 714121110 • Hydraulic equipment for Luna Sat heating / DHW production model RS2Z KSV 714121210 • Hydraulic equipment for 2 flow meters for Luna Sat R/1, RP/1, RPB, RPE models KSV 714121310 • Hydraulic equipment for 2 flow meters for Luna Sat RH, RPH, R2H. RPEH models KSV 714121410 •
Code
Mounting accessories (all casings has built-in taps except mod. RH and RHG1)
Single zone casing - for R/1, RP/1, RPB, RPE, RSP, RA KSV 714145310 • 2 zones casing - for R2Z, RS2Z, RA2Z KSV 714145410 • Casing for RH 650x650 mm (without taps; cod. KSV 714120911 • to be ordered) KSV 714117011 • Casing for R2H KSV 714145510 • Casing for RHG1 (without taps) KSV 714124010 • Casing for RPH - RPEH KSV 714145610 • Casing for RC KSV 714131011 • Casing for RST KSV 714141210 • Casing for RP-SP KSV 714142010 •
Code
CylinderLuna SAT B60 cylinder KSV 71410841
Code
Accessories for Luna Sat Rack (3 modules)
Accessories for Luna Sat Rack (4 modules)
Code
Code
3 Luna Sat RC – Rack casing KSV 714142311 • Flow/return collectors 3 Luna Sat RC- Rack KSV 714142610 • DHW collector kit 3 Luna Sat RC- Rack KSV 714142810 •DCW collector kit 3 Luna Sat RC- Rack KSV 714142910 •Collector kit for the 3rd flow meter 3 Luna Sat RC- Rack KSV 714143010 •
4 Luna Sat RC – Rack case KSV 714142411 • Flow/return collectors 4 Luna Sat RC- Rack KSV 714142710 • DHW collector kit 4 Luna Sat RC- Rack KSV 714143110 • DCW collector kit 4 Luna Sat RC- Rack KSV 714143210 • Collector kit for the 3rd flow meter 3 Luna Sat RC- Rack KSV 714143310 •
53
Products technical data
High output condensing gas boilers 54
54
PR
OD
UC
T
H
eat i
nput
He
at o
utpu
t
Effic
ienc
y (Hi
)
Max
imum
Out
put
no
t wor
king
Max
imum
out
put
Min
imum
Out
put
Pow
er co
nsum
ptio
n
92/4
2/EE
C
bu
rner
M
AX.
MIN
. M
AX.
MIN
. av
erag
e 30
%
star
s co
mbust
ion c
him
ney
radi
atin
g ch
imne
y flu
e CO
2 O
2 ex
ceed
ing
flue
flue
CO2
O2
exce
eding
flu
e no
min
al n
omin
al
Cert
ifica
te
tem
p.
nu
mbe
r ef
ficie
ncy
heat
he
at
heat
te
mp.
ai
r m
ass
tem
p.
air
mas
s bo
iler
pum
p EE
C
Pn 7
0°C
92
/42/
EEC
lo
sses
lo
sses
lo
sses
m
ax
and
flow
/rat
e m
ax
and
flow
/rat
e
kW
kW
kW
kW
%
%
%
%
%
%
°C
%
%
%
kg
/s
°C
%
%
%
kg/s
W
W
N
r.
LUN
A P
LATI
NU
M 1
.12
12,4
2,
1 12
2
97,7
10
8 HHHH
98
,2
1,8
0,5
0,1
75
9,0
4,8
30
0,00
6 55
9,
0 4,
8 30
0,
001
95
75
0085
CM
0140
LUN
A P
LATI
NU
M 1
.18
17,4
2,
1 16
,9
2 97
,6
108
HHHH
98
,1
1,9
0,5
0,1
75
9,0
4,8
30
0,00
8 55
9,
0 4,
8 30
0,
001
110
75
0085
CM
0140
LUN
A P
LATI
NU
M 1
.24
24,7
2,
5 24
2,
4 97
,6
107,
6 HHHH
98
,1
1,9
0,5
0,1
80
9,0
4,8
30
0,01
1 55
9,
0 4,
8 30
0,
001
120
75
0085
CM
0140
LUN
A P
LATI
NU
M 1
.32
33
3,3
32
3,2
97,6
10
7,6
HHHH
98
,1
1,9
0,5
0,1
80
9,0
4,8
30
0,01
5 55
9,
0 4,
8 30
0,
002
130
75
0085
CM
0140
LUN
A D
UO
-TEC
MP
1.50
46
,3
5,1
45
5 97
,4
107,
6 HHHH
98
,0
2,0
0,6
0,1
92
9,0
4,8
30
0,02
1 58
8,
5 5,
7 38
0,
002
190
115
0085
CM
0128
LUN
A D
UO
-TEC
MP
1.60
56
,6
6,3
55
6,1
97,2
10
7,6
HHHH
97
,8
2,2
0,6
0,1
96
9,0
4,8
30
0,02
6 59
9,
0 4,
8 30
0,
003
210
120
0085
CM
0128
LUN
A D
UO
-TEC
MP
1.70
66
,9
7,4
65
7,2
97,2
10
7,6
HHHH
97
,8
2,2
0,6
0,1
76
9,0
4,8
30
0,03
1 55
8,
5 5,
7 38
0,
004
210
125
0085
CM
0128
LUN
A D
UO
-TEC
MP
1.90
87
,4
9,7
85
9,4
97,3
10
7,3
HHHH
97
,9
2,1
0,6
0,1
75
9,0
4,8
30
0,04
0 55
8,
5 5,
7 38
0,
005
275
165
0085
CM
0128
LUN
A D
UO
-TEC
MP
1.11
0 10
4,9
11,7
10
2 11
,4
97,2
10
7,4
HHHH
97
,8
2,2
0,6
0,1
74
9,2
4,5
27
0,04
7 55
9,
0 4,
8 30
0,
005
320
170
0085
CM
0128
LUN
A H
T 1.
350
34,8
15
33
,9
14,5
97
,3
107,
6 HHHH
97
,9
2,1
0,6
0,1
72
8,7
5,4
34
0,01
6 55
8,
4 5,
9 39
0,
007
45
- 00
85B
P02
56
LUN
A H
T 1.
450
46,4
15
45
14
,5
97,3
10
7,6
HHHH
97
,9
2,1
0,6
0,1
74
8,7
5,4
34
0,02
2 55
8,
4 5,
9 39
0,
007
75
- 00
85B
P02
56
LUN
A H
T 1.
450
P 46
,4
15
45
14,5
97
,3
107,
6 HHHH
97
,9
2,1
0,6
0,1
74
8,7
5,4
34
0,02
2 55
8,
4 5,
9 39
0,
007
175
100
0085
BP
0256
LUN
A H
T 1.
550
56,7
16
55
15
,5
97,4
10
7,5
HHHH
98
,0
2,0
0,6
0,1
78
8,7
5,4
34
0,02
7 55
8,
4 5,
9 39
0,
008
80
- 00
85B
P02
56
LUN
A H
T 1.
650
67
20
65
19,3
97
,3
107,
6 HHHH
97
,9
2,1
0,6
0,1
75
8,7
5,4
34
0,03
2 55
8,
4 5,
9 39
0,
010
125
- 00
85B
P02
56
LUN
A H
T 1.
850
87,2
26
,4
85
25,7
97
,5
107,
3 HHHH
98
,1
1,9
0,6
0,1
75
8,7
5,4
34
0,04
1 55
8,
4 5,
9 39
0,
013
150
- 00
85B
P02
56
LUN
A H
T 1.
1000
10
5 29
,8
102
29
97,4
10
7,4
HHHH
98
,0
2,0
0,6
0,1
74
8,7
5,4
34
0,05
0 55
8,
4 5,
9 39
0,
015
200
- 00
85B
P02
56
PO
WER
HT
1.45
0 46
,4
12,2
45
11
,8
97,3
10
7,6
HHHH
97
,9
2,1
0,6
0,1
75
8,7
5,4
34
0,02
2 55
8,
4 5,
9 39
0,
006
900
- 00
85B
Q00
55
PO
WER
HT
1.65
0 67
13
,8
65
13,4
97
,3
107,
6 HHHH
97
,9
2,1
0,6
0,1
75
8,9
5,0
31
0,03
1 55
8,
4 5,
9 39
0,
007
110
- 00
85B
Q00
55
PO
WER
HT
1.85
0 87
,2
33,1
85
32
,2
97,5
10
7,3
HHHH
98
,1
1,9
0,6
0,1
78
8,7
5,4
34
0,04
1 56
8,
6 5,
6 36
0,
016
100
- 00
85B
Q00
55
PO
WER
HT
1.10
00
102,
7 36
,8
100
35,8
97
,4
107,
4 HHHH
98
,0
2,0
0,6
0,1
80
8,7
5,4
34
0,04
9 57
8,
6 5,
6 36
0,
018
160
- 00
85B
Q00
55
PO
WER
HT
1.11
50
115
40
115
39
97,4
10
7,5
HHHH
98
,0
2,0
0,6
0,1
72
8,7
5,4
34
0,05
4 55
8,
4 5,
9 39
0,
019
128
- 00
85B
Q00
55
PO
WER
HT
1.12
00
123,
2 40
12
0 39
97
,4
107,
5 HHHH
98
,0
2,0
0,6
0,1
77
8,7
5,4
34
0,05
8 58
8,
4 5,
9 39
0,
019
135
- 00
85B
Q00
55
PO
WER
HT
1.15
00
154
41,5
15
0 40
,4
97,4
10
7,2
HHHH
98
,0
2,0
0,6
0,1
75
8,7
5,4
34
0,07
3 58
8,
4 5,
9 39
0,
020
235
- 00
85B
Q00
55
PO
WER
HT
1.23
0 21
5 35
21
0,1
33,5
97
,3
105,
4 HHHH
97
,9
1,7
2,5
0,0
61
9,3
4,3
26
0,09
7 57
9,
3 4,
3 26
0,
016
330
- 00
85C
L007
2
PO
WER
HT
1.28
0 26
0 42
25
4,5
40,2
97
,4
105,
6 HHHH
98
,0
1,7
2,5
0,0
61
9,3
4,3
26
0,11
8 57
9,
3 4,
3 26
0,
019
350
- 00
85C
L007
2
PO
WER
HT
1.32
0 30
0 48
29
4 45
,9
97,4
10
5,7
HHHH
98
,0
1,7
2,6
0,0
61
9,3
4,3
26
0,13
6 57
9,
3 4,
3 26
0,
021
410
- 00
85C
L007
2
DAT
A R
EFER
RED
TO
PO
WER
HT-
A:
SOO
N A
VAIL
AB
LE
Products technical data – High output condensing boilers
55
QualityEnvironment
Safety
QualityEnvironment
Safetyare Baxi strategic aims and the awarded certifications
ensure compliance with the specific regulations
The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical or commercial demands, at any time without notice.
Baxi S.p.A. 02-13 (E)
36061 BASSANO DEL GRAPPA (VI) - ITALYVia Trozzetti, [email protected]