COMMITTEE ON THE MONOGRAM
DIVISION OR ACTIVITY
COMMITTEE ON THE MONOGRAM
2
API Spec 10A, Sec 10.1• The space between the slurry container and the walls of the
pressure vessel shall be completely filled with a hydrocarbon oil. The selected oil shall have the following physical properties:
• ⎯ viscosity range: 6 mm2/s to 79 mm2/s at 38 °C (100 °F) or 6 cSt to 79 cSt at 38 °C (100 °F); or
• 45 SSU to 360 SSU at 38 °C(100 °F);• ⎯ specific heat: 1,9 kJ/(kg K) to 2,5 kJ/(kg K) (0,45 Btu/lb °F to ⋅ ⋅ ⋅
0,60 Btu/lb °F); ⋅ (no condition indicated)• ⎯ thermal conductivity: 0,112 W/(m K) to 0,138 W/(m K) [0,065 ⋅ ⋅
Btu/(h ft2 °F/ft) to 0,08 Btu/(h ft2 °F/ft)]; ⋅ ⋅ ⋅ ⋅ (no condition indicated)
• ⎯ specific gravity: 0,83 to 0,93. (no condition indicated)
Date
3
CONSISTOMETER OIL SPECIFICATIONS
• Specification as now written cannot be met• Possible solutions
– Amend current specification– Revise entire oil wording to allow for
synthetics
Date