1
4180 E Sand Ridge Rd Morris, IL 60450 | 800-435-1636 tel | 800-767-7605 fax | [email protected] | www.primuselectronics.com CommScope’s G2™ Series Tower Mounts Does your current sector frame supplier comply with Verizon’s NEW NSTD-445 National Standard for antenna mounts? Primus has a full inventory of CommScope’s G2™ Series Tower Mounts that comply with the new NSTD-445 National Standard with Verizon. These innovative mounts were designed to address the industry’s biggest concerns of current and future EPA requirements, mount loading capacity, and assembly time. The G2™ Series was designed from the ground up with an innovative vision that started with a blank slate then focused on each bend, weld, support, and even the alloy composition of each material used. The resulting solution features an innovative tubular V Stand-off design that lowers the EPA of the G2™ Series mount while increasing its load bearing capabilities and even reducing assembly time. This series features a universal saddle mount design with 8 taper positions - from 0º to 7º. Azimuth adjustment of up to 120º is easily attained by pivoting the supported frame on the saddle mount. the G2™ Series also incorporates a chemically etched alloy tag that provides reference to the engineering specifications and loading capacity. Full traceability throughout manufacturing is ensured by AISC Certified manufacturing processes to guarantee quality and reliability. For more information or to place an order, call Primus at (800) 435-1636 or email [email protected].
