+ All Categories
Home > Documents > Communication for Industry

Communication for Industry

Date post: 26-Oct-2014
Category:
Upload: ffasek
View: 17 times
Download: 0 times
Share this document with a friend
Popular Tags:
38
Communication for industry Switches #06654 Net Price: 129,00 EUR Unit: pcs Unmanaged switch, 4x 10/100 RJ-45 + 1x 100 MM SC, slim housing (ORing IES-1041FX-MM-SC) IES-1000 Series are designed for industrial-grade Ethernet, and particularly for facilities of rugged industry and infrastructure. These switches are tailored to perform various features, such as wide temperature, redundant power input (8-port models), relay output alarm, surge protectionKetc. The 8-port models of IES-1000 Series offer three different power inputs to enhance its reliability, two supplied by terminal block, and one by power jack. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. Thus, the IES-1000 Series is the best choice for facility management, sewage treatment, power utility, telecommunication, transportation and all other mission-critical applications that require reliable Ethernet connectivity. Physical Ports 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4 100Base-FX Multimode ports (2km, 1310nm, SC connector): 1 Technology Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control MAC Table: 1024 MAC addresses Processing: Store-and-Forward LED Indicators Power indicator: Green - Power LED x 2 Fault indicator: Yellow - Indicate PWR1 or PWR2 failure 10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision Fiber port indicator: Green for port Link/Act, Yellow for Link Fault contact Relay: Relay output to carry capacity of 1A at 24VDC Power Input power: Dual DC inputs. 12÷48VDC on 6-pin terminal block Power consumption (typical): 5W Overload current protection: present Reverse polarity protection: present on terminal block Physical Characteristic Enclosure: IP-30 Dimension (W x D x H): 33mm x 95mm x 144mm Weight: 378g Environmental Storage Temperature: -40÷85°C (-40÷185°F) Operating Temperature: -40÷70°C (-40÷158°F) Operating Humidity: 5%÷95% Non-condensing Regulatory approvals EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock: IEC60068-2-27 Free Fall: IEC60068-2-32 Vibration: IEC60068-2-6 Safety: EN60950 Warranty Warranty period: 5 years #06655 Net Price: 140,00 EUR Unit: pcs Unmanaged switch, 4x 10/100 RJ-45 + 1x 100 SM SC, slim housing (ORing IES-1041FX-SS-SC) IES-1000 Series are designed for industrial-grade Ethernet, and particularly for facilities of rugged industry and infrastructure. These switches are tailored to perform various features, such as wide temperature, redundant power input (8-port models), relay output alarm, surge protectionKetc. The 8-port models of IES-1000 Series offer three different power inputs to enhance its reliability, two supplied by terminal block, and one by power jack. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. Thus, the IES-1000 Series is the best choice for facility management, sewage treatment, power utility, telecommunication, transportation and all other mission-critical applications that require reliable Ethernet connectivity. Physical Ports 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4 100Base-FX Singlemode ports (30km, 1550nm, SC connector): 1 Technology Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control MAC Table: 1024 MAC addresses Processing: Store-and-Forward LED Indicators Power indicator: Green - Power LED x 2 Fault indicator: Yellow - Indicate PWR1 or PWR2 failure 10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision Fiber port indicator: Green for port Link/Act, Yellow for Link Fault contact Relay: Relay output to carry capacity of 1A at 24VDC Power Input power: Dual DC inputs. 12÷48VDC on 6-pin terminal block Power consumption (typical): 5W Overload current protection: present Reverse polarity protection: present on terminal block Physical Characteristic Enclosure: IP-30 Dimension (W x D x H): 33mm x 95mm x 144mm Weight: 378g Environmental Storage Temperature: -40÷85°C (-40÷185°F) Operating Temperature: -40÷70°C (-40÷158°F) Operating Humidity: 5%÷95% Non-condensing Regulatory approvals EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock: IEC60068-2-27 Free Fall: IEC60068-2-32 Vibration: IEC60068-2-6 Safety: EN60950 Warranty Warranty period: 5 years #06656 Net Price: 161,00 EUR Unit: pcs Unmanaged switch, 4x 10/100 RJ-45 + 2x 100 MM SC, slim housing (ORing IES-1042FX-MM-SC) IES-1000 Series are designed for industrial-grade Ethernet, and particularly for facilities of rugged industry and infrastructure. These switches are tailored to perform various features, such as wide temperature, redundant power input (8-port models), relay output alarm, surge protectionKetc. The 8-port models of IES-1000 Series offer three different power inputs to enhance its reliability, two supplied by terminal block, and one by power jack. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. Thus, the IES-1000 Series is the best choice for facility management, sewage treatment, power utility, telecommunication, transportation and all other mission-critical applications that require reliable Ethernet connectivity. Physical Ports 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4 100Base-FX Multimode ports (2km, 1310nm, SC connector): 2 Technology Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control MAC Table: 1024 MAC addresses Processing: Store-and-Forward LED Indicators Power indicator: Green - Power LED x 2 Fault indicator: Yellow - Indicate PWR1 or PWR2 failure 10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision Fiber port indicator: Green for port Link/Act, Yellow for Link Fault contact Relay: Relay output to carry capacity of 1A at 24VDC Power Input power: Dual DC inputs. 12÷48VDC on 6-pin terminal block Power consumption (typical): 7W Overload current protection: present Reverse polarity protection: present on terminal block Physical Characteristic Enclosure: IP-30 Dimension (W x D x H): 33mm x 95mm x 144mm Weight: 382g Environmental Storage Temperature: -40÷85°C (-40÷185°F) Operating Temperature: -40÷70°C (-40÷158°F) Operating Humidity: 5%÷95% Non-condensing Regulatory approvals EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock: IEC60068-2-27 Free Fall: IEC60068-2-32 Vibration: IEC60068-2-6 Safety: EN60950 Warranty Warranty period: 5 years 1/38 http://www.atel-electronics.eu 2012.06.15 17:12
Transcript
Page 1: Communication for Industry

Communication for industry

Switches

#06654Net Price:

129,00 EURUnit: pcs

Unmanaged switch, 4x 10/100 RJ-45 + 1x 100MM SC, slim housing (ORing IES-1041FX-MM-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4100Base-FX Multimode ports (2km, 1310nm, SCconnector): 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow controlMAC Table: 1024 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 33mm x 95mm x 144mmWeight: 378g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06655Net Price:

140,00 EURUnit: pcs

Unmanaged switch, 4x 10/100 RJ-45 + 1x 100 SMSC, slim housing (ORing IES-1041FX-SS-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4100Base-FX Singlemode ports (30km, 1550nm, SCconnector): 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow controlMAC Table: 1024 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 33mm x 95mm x 144mmWeight: 378g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06656Net Price:

161,00 EURUnit: pcs

Unmanaged switch, 4x 10/100 RJ-45 + 2x 100MM SC, slim housing (ORing IES-1042FX-MM-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4100Base-FX Multimode ports (2km, 1310nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow controlMAC Table: 1024 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 33mm x 95mm x 144mmWeight: 382g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

1/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 2: Communication for Industry

Communication for industry

#06657Net Price:

180,00 EURUnit: pcs

Unmanaged switch, 4x 10/100 RJ-45 + 2x 100 SMSC, slim housing (ORing IES-1042FX-SS-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4100Base-FX Singlemode ports (30km, 1550nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow controlMAC Table: 1024 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 33mm x 95mm x 144mmWeight: 382g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08159Net Price:

69,30 EURUnit: pcs

Unmanaged switch, 5x 10/100 RJ-45, slimhousing (ORing IES-150B)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 5

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for FlowcontrolMAC Table: 2048 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 4-pinterminal blockPower consumption (typical): 3WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 70mm x 95mmWeight: 205g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06595Net Price:

218,00 EURUnit: pcs

Unmanaged switch, 6x 10/100 RJ-45 + 2x10/1000 RJ-45 (ORing IES-1062GT)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 61000 Base-T Ports in RJ45 Auto MDI/MDIX: 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3ab for1000BaseTX, IEEE 802.3x for Flow controlMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 677g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

2/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 3: Communication for Industry

Communication for industry

#06605Net Price:

235,00 EURUnit: pcs

Unmanaged switch, 6x 10/100 RJ-45 + 2x 100MM SC (ORing IES-1062FX-MM-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6100Base-FX Multimode ports (2km, 1310nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow controlMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 8WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 680g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06608Net Price:

293,00 EURUnit: pcs

Unmanaged switch, 6x 10/100 RJ-45 + 2x 100 SMSC (ORing IES-1062FX-SS-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6100Base-FX Singlemode ports (30km, 1550nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow controlMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 8WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 680g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06599Net Price:

337,00 EURUnit: pcs

Unmanaged switch, 6x 10/100 RJ-45 + 2x 1000MM SC (ORing IES-1062GF-MM-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 61000Base-SX Multimode ports (550m, 850nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3z for1000Base-X, IEEE 802.3x for Flow controlMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 6WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 685g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

3/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 4: Communication for Industry

Communication for industry

#06602Net Price:

427,00 EURUnit: pcs

Unmanaged switch, 6x 10/100 RJ-45 + 2x 1000SM SC (ORing IES-1062GF-SS-SC)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 61000Base-LX Singlemode ports (10km, 1310nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3z for1000Base-X, IEEE 802.3x for Flow controlMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 6WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 685g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06591Net Price:

163,00 EURUnit: pcs

Unmanaged switch, 8x 10/100 RJ-45 (ORingIES-1080)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for FlowcontrolMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 4WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 666g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06651Net Price:

241,00 EURUnit: pcs

Unmanaged switch, 8x 10/100 RJ-45 + 2x 1000SFP (ORing IES-1082GP)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 81000 Mbps SFP Ports: 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for FlowcontrolMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 8WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 675g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

4/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 5: Communication for Industry

Communication for industry

#06653Net Price:

85,10 EURUnit: pcs

Unmanaged switch, 8x 10/100 RJ-45, slimhousing (ORing IES-1080A)IES-1000 Series are designed for industrial-gradeEthernet, and particularly for facilities of ruggedindustry and infrastructure. These switches aretailored to perform various features, such as widetemperature, redundant power input (8-port models),relay output alarm, surge protectionKetc. The 8-portmodels of IES-1000 Series offer three differentpower inputs to enhance its reliability, two suppliedby terminal block, and one by power jack. When theprimary DC power input fails, the backup power inputwill take over immediately to guarantee a non-stopoperation. Thus, the IES-1000 Series is the bestchoice for facility management, sewage treatment,power utility, telecommunication, transportation andall other mission-critical applications that requirereliable Ethernet connectivity.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for FlowcontrolMAC Table: 1024 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 4WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 33mm x 95mm x 144mmWeight: 391g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08160Net Price:

334,00 EURUnit: pcs

Unmanaged switch, 16x 10/100 RJ-45 (ORingIES-1160)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 16

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for FlowcontrolMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 9WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 74.3mm x 109.2mm x153.6mmWeight: 1060g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08161Net Price:

432,00 EURUnit: pcs

Unmanaged switch, 24x 10/100 RJ-45 (ORingIES-1240)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 24

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for FlowcontrolMAC Table: 8192 MAC addressesProcessing: Store-and-ForwardSoftware Features: Port configuration, Port status,Port statistics, Port monitoring, Port security

LED IndicatorsPower indicator: Green - Power LED x 3Fault indicator: Yellow - Indicate PWR1 or PWR2failure10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 9.6WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 96mm x 109.2mm x153.6mmWeight: 1052g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

5/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 6: Communication for Industry

Communication for industry

#06879Net Price:

144,00 EURUnit: pcs

Unmanaged switch, 4x 10/1000 RJ-45 + 1x 1000SFP , slim housing (ORing IGS-1041GPA)Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 41000Base-X SFP Ports: 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX,, IEEE802.3z for 1000Base-X, IEEE 802.3x for Flow controlMAC Table: 1024 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Amber - Indicate PWR1 or PWR2failure10/100/1000TX RJ45 port Indicator: Green on onlyfor 1000Mbit, Green and Amber on for 100Mbit,Amber on only for 10Mbit1000X SFP port Indicator: Green for port Link/Act

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 94.9m x 144.3mmWeight: 403g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06878Net Price:

139,00 EURUnit: pcs

Unmanaged switch, 5x 10/1000 RJ-45, slimhousing (ORing IGS-1050A)Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 5

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3ab for1000Base-T, IEEE 802.3x for Flow controlMAC Table: 1024 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Amber - Indicate PWR1 or PWR2failure10/100/1000TX RJ45 port Indicator: Green on onlyfor 1000Mbit, Green and Amber on for 100Mbit,Amber on only for 10Mbit

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 94.9m x 144.3mmWeight: 420g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08166Net Price:

285,00 EURUnit: pcs

Unmanaged switch, 8x 10/1000 RJ-45 PoE, slimhousing (ORing IGPS-1080A)Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 8

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3ab for1000Base-T, IEEE 802.3x for Flow control, 802.3atPoE specyficationMAC Table: 2048 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Amber - Indicate PWR1 or PWR2failure10/100/1000TX RJ45 port Indicator: Green on onlyfor 1000Mbit, Green and Amber on for 100Mbit,Amber on only for 10Mbit

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 8WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 94.9m x 144.3mmWeight: 420g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

6/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 7: Communication for Industry

Communication for industry

#08156Net Price:

256,00 EURUnit: pcs

Unmanaged switch, 8x 10/1000 RJ-45, slimhousing (ORing IGS-1080A)IGS-1080A is the slim type unmanaged gigabitEthernet switch with 8 x 10/100/1000Base-T(X)ports. IGS-1080A supports redundant power input,rigid IP-30 housing, plus DIP switches for enabling ordisabling relay output alarm. In addition, the wideoperating temperature range from -40°C to 70°C cansatisfy most of operating environments.Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 8

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3ab for1000Base-T, IEEE 802.3x for Flow controlMAC Table: 2048 MAC addressesProcessing: Store-and-Forward

LED IndicatorsPower indicator: Green - Power LED x 2Fault indicator: Amber - Indicate PWR1 or PWR2failure10/100/1000TX RJ45 port Indicator: Green on onlyfor 1000Mbit, Green and Amber on for 100Mbit,Amber on only for 10Mbit

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 94.9m x 144.3mmWeight: 420g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06587Net Price:

300,00 EURUnit: pcs

Smart switch, 4x 10/100 RJ-45 + 2x 100 MM SC,O-Ring <10ms (ORing IES-2042FX-MM-SC)The IES-2000 Series are cost-effective redundantring switch which adopt the newest structure tosupport ultra fast redundant ring function within10ms (in 250 units). Its excellent performanceprotects your mission-critical applications from anynetwork interruptions or temporary malfunctions.This model can automatically switch to the other portin 10ms when the master link fails.

The redundant mode function is supported as well.After selecting the redundant mode and connectingfour LAN ports to different switches or the sameswitch with different ports, the IES-2000 Series canautomatically switch to other LAN ports within 10mS,and still guarantee a non-stop connection while theconnection of master link fails.

The IES-2000 also provides event notificationthrough email. It can be configured remotely by Weband windows utility (OPEN-Vision). The IES-2050can be defined as a light version of IES-3000 series.With its competitive price, IES-2000 is the bestcost-effective option for redundant Ethernet network.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4100Base-FX Multimode ports (2km, 1310nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control, IEEE 802.1D for STP(Spanning Tree Protocol), IEEE 802.1w for RSTP(Rapid Spanning Tree Protocol), IEEE 802.3ad forLACP (Link Aggregation Control Protocol)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 670g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06588Net Price:

322,00 EURUnit: pcs

Smart switch, 4x 10/100 RJ-45 + 2x 100 SM SC,O-Ring <10ms (ORing IES-2042FX-SS-SC)The IES-2000 Series are cost-effective redundantring switch which adopt the newest structure tosupport ultra fast redundant ring function within10ms (in 250 units). Its excellent performanceprotects your mission-critical applications from anynetwork interruptions or temporary malfunctions.This model can automatically switch to the other portin 10ms when the master link fails.

The redundant mode function is supported as well.After selecting the redundant mode and connectingfour LAN ports to different switches or the sameswitch with different ports, the IES-2000 Series canautomatically switch to other LAN ports within 10mS,and still guarantee a non-stop connection while theconnection of master link fails.

The IES-2000 also provides event notificationthrough email. It can be configured remotely by Weband windows utility (OPEN-Vision). The IES-2050can be defined as a light version of IES-3000 series.With its competitive price, IES-2000 is the bestcost-effective option for redundant Ethernet network.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4100Base-FX Singlemode ports (30km, 1550nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control, IEEE 802.1D for STP(Spanning Tree Protocol), IEEE 802.1w for RSTP(Rapid Spanning Tree Protocol), IEEE 802.3ad forLACP (Link Aggregation Control Protocol)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 670g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

7/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 8: Communication for Industry

Communication for industry

#06589Net Price:

320,00 EURUnit: pcs

Smart switch, 4x 10/100 RJ-45 PoE + 2x 10/100RJ-45, O-Ring <10ms (ORing IPS-2042TX)IPS-2042TX/2042FX are lite-managed RedundantRing Ethernet switches with 4x10/100TX ports withPoE PSE function and 2x10/100TX or2x100Base-FX ports. IPS series support Power overEthernet, a system to transmit electrical power,along with data, to remote devices over standardtwisted-pair cable in an Ethernet network. Each IPSswitch has 4X10/100TX PSE (Power SourcingEquipment) ports. PSE is a device (switch or hub forinstance) that will provide power in a PoE setup.With completely support of Ethernet Redundancyprotocol, O-Ring (recovery time < 10ms over 250units of connection) and RSTP/STP (IEEE802.1w/D) can protect your mission-criticalapplications from network interruptions or temporarymalfunctions with its fast recovery technology.IPS-2042TX / 2042FX can be managed centralizedand convenient by a powerful windows utility,Open-Vision. The wide operating temperature rangefrom -40 to 70°C can satisfy most of operatingenvironment. Therefore, the switch is one of themost reliable choice for easy managed and FiberEthernet application.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIXw/PoE (PSE): 410/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1w for RSTP (Rapid SpanningTree Protocol), IEEE 802.1AB dla LLDP (Link LayerDiscovery Protocol), IEEE 802.3af PoE specification(up to 25 Watts per port for PSE)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 696g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06590Net Price:

415,00 EURUnit: pcs

Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 MMSC, O-Ring <10ms (ORing IPS-2042FX-MM-SC)IPS-2042TX/2042FX are lite-managed RedundantRing Ethernet switches with 4x10/100TX ports withPoE PSE function and 2x10/100TX or2x100Base-FX ports. IPS series support Power overEthernet, a system to transmit electrical power,along with data, to remote devices over standardtwisted-pair cable in an Ethernet network. Each IPSswitch has 4X10/100TX PSE (Power SourcingEquipment) ports. PSE is a device (switch or hub forinstance) that will provide power in a PoE setup.With completely support of Ethernet Redundancyprotocol, O-Ring (recovery time < 10ms over 250units of connection) and RSTP/STP (IEEE802.1w/D) can protect your mission-criticalapplications from network interruptions or temporarymalfunctions with its fast recovery technology.IPS-2042TX / 2042FX can be managed centralizedand convenient by a powerful windows utility,Open-Vision. The wide operating temperature rangefrom -40 to 70°C can satisfy most of operatingenvironment. Therefore, the switch is one of themost reliable choice for easy managed and FiberEthernet application.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIXw/PoE (PSE): 4100Base-FX Multimode ports (2km, 1310nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control, IEEE 802.1D for STP(Spanning Tree Protocol), IEEE 802.1w for RSTP(Rapid Spanning Tree Protocol), IEEE 802.1AB dlaLLDP (Link Layer Discovery Protocol), IEEE 802.3afPoE specification (up to 25 Watts per port for PSE)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 709g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06592Net Price:

454,00 EURUnit: pcs

Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SMSC, O-Ring <10ms (ORing IPS-2042FX-SS-SC)IPS-2042TX/2042FX are lite-managed RedundantRing Ethernet switches with 4x10/100TX ports withPoE PSE function and 2x10/100TX or2x100Base-FX ports. IPS series support Power overEthernet, a system to transmit electrical power,along with data, to remote devices over standardtwisted-pair cable in an Ethernet network. Each IPSswitch has 4X10/100TX PSE (Power SourcingEquipment) ports. PSE is a device (switch or hub forinstance) that will provide power in a PoE setup.With completely support of Ethernet Redundancyprotocol, O-Ring (recovery time < 10ms over 250units of connection) and RSTP/STP (IEEE802.1w/D) can protect your mission-criticalapplications from network interruptions or temporarymalfunctions with its fast recovery technology.IPS-2042TX / 2042FX can be managed centralizedand convenient by a powerful windows utility,Open-Vision. The wide operating temperature rangefrom -40 to 70°C can satisfy most of operatingenvironment. Therefore, the switch is one of themost reliable choice for easy managed and FiberEthernet application.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIXw/PoE (PSE): 4100Base-FX Singlemode ports (30km, 1550nm, SCconnector): 2

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control, IEEE 802.1D for STP(Spanning Tree Protocol), IEEE 802.1w for RSTP(Rapid Spanning Tree Protocol), IEEE 802.1AB dlaLLDP (Link Layer Discovery Protocol), IEEE 802.3afPoE specification (up to 25 Watts per port for PSE)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 709g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

8/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 9: Communication for Industry

Communication for industry

#06583Net Price:

190,00 EURUnit: pcs

Smart switch, 5x 10/100 RJ-45, O-Ring <10ms(ORing IES-2050A)The IES-2000 Series are cost-effective redundantring switch which adopt the newest structure tosupport ultra fast redundant ring function within10ms (in 250 units). Its excellent performanceprotects your mission-critical applications from anynetwork interruptions or temporary malfunctions.This model can automatically switch to the other portin 10ms when the master link fails.

The redundant mode function is supported as well.After selecting the redundant mode and connectingfour LAN ports to different switches or the sameswitch with different ports, the IES-2000 Series canautomatically switch to other LAN ports within 10mS,and still guarantee a non-stop connection while theconnection of master link fails.

The IES-2000 also provides event notificationthrough email. It can be configured remotely by Weband windows utility (OPEN-Vision). The IES-2050can be defined as a light version of IES-3000 series.With its competitive price, IES-2000 is the bestcost-effective option for redundant Ethernet network.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 5

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1w for RSTP (Rapid SpanningTree Protocol), IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LEDRing Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring mode10/100TX RJ45 port indicator: Green for portLink/Act

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: 9÷30 VDC voltage power inputPower consumption (typical): 3WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 88mm x 102mm x 24mmWeight: 308g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06586Net Price:

216,00 EURUnit: pcs

Smart switch, 6x 10/100 RJ-45, O-Ring <10ms(ORing IES-2060)The IES-2000 Series are cost-effective redundantring switch which adopt the newest structure tosupport ultra fast redundant ring function within10ms (in 250 units). Its excellent performanceprotects your mission-critical applications from anynetwork interruptions or temporary malfunctions.This model can automatically switch to the other portin 10ms when the master link fails.

The redundant mode function is supported as well.After selecting the redundant mode and connectingfour LAN ports to different switches or the sameswitch with different ports, the IES-2000 Series canautomatically switch to other LAN ports within 10mS,and still guarantee a non-stop connection while theconnection of master link fails.

The IES-2000 also provides event notificationthrough email. It can be configured remotely by Weband windows utility (OPEN-Vision). The IES-2050can be defined as a light version of IES-3000 series.With its competitive price, IES-2000 is the bestcost-effective option for redundant Ethernet network.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1w for RSTP (Rapid SpanningTree Protocol), IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 657g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06570Net Price:

134,00 EURUnit: pcs

Smart switch, 4x 10/100 RJ-45, PCI, O-Ring<10ms, PCI slot (ORing ICS-4040)ICP-4040 is an innovative PCI-bus Lite-managedRedundant Ring Ethernet switches with 4x10/100TXports. It immediately upgrades currentIPC/embedded system to redundant Ethernetnetwork. With completely support of EthernetRedundancy protocol, O-Ring (recovery time < 10msover 250 units of connection) and RSTP/STP (IEEE802.1w/D) can protect your mission-criticalapplications from network interruptions or temporarymalfunctions with its fast recovery technology.ICP-4040 is able to handle different types of networkconfiguration, such as Network + Device Redundant,Network Redundant, Device CommunicationRedundant and Ethernet Switch. In addition,ICP-4040 provides users with PCI and externalredundant power inputs, guarantees a non-stopoperation. Normally, PCI bus can supply primarypower, when the host device shuts down; ICP-4040is able to work through external power continuously.Therefore, ICP-4040 is the best solution to upgradecurrent IPC system into redundant Ethernet world.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control, IEEE 802.1D for STP(Spanning Tree Protocol), IEEE 802.1w for RSTP(Rapid Spanning Tree Protocol), IEEE 802.1AB dlaLLDP (Link Layer Discovery Protocol)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower / Ready indicator: Green - Ready LED x 1Fault indicator: Red - Indicate unexpected eventoccurredO-Ring indicator: Yellow - Indicate port operated inO-Ring mode on each port10/100TX RJ45 port indicator: Link (Green On) /Activity (Green Blinking)

Fault contactRelay: Relay output to carry capacity of 1A at24VDC (Optional)

PowerInput power: 1 DC redundant external power 9÷30VDCPower consumption (typical): 3.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicDimension: standard profile PCI card, 124mm lengthWeight: 100g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6

WarrantyWarranty period: 3 years

9/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 10: Communication for Industry

Communication for industry

#06884Net Price:

285,00 EURUnit: pcs

Smart switch, 5x 10/100 M12, O-Ring <10ms, IP67housing (ORing IES-2050-M12)Physical Ports10/100 Base-T(X) Ports w/Auto MDI/MDIX: 5Connector Type: Waterproof M12

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1w for RSTP (Rapid SpanningTree Protocol), IEEE 802.1AB for LLDP (Link LayerDiscovery Protocol)MAC Table: 2048 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching bandwidth: 1.0 GbpsVLAN: Port BasedSecurity Features: Enable/disable ports, VLAN tosegregate and secure network trafficSoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, Port configuration, Portstatus, Port statistics, Port monitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring

LED IndicatorsPower Indicator: Green - Power LED x 1, Indicatespower inputReady Indicator: Amber - Ready LED x 1, Indicatessystem readyO-Ring Indicator: Amber - Indicates port operating inO-Ring mode (per port)10/100TX Port Indicator: Green for port Link/Act.(per port)

PowerInput power: 9÷30VDCConnector Type: Waterproof M12Power consumption (typical): 3WOverload current protection: presentReverse polarity protection: present

Physical CharacteristicEnclosure: IP-67Dimension (W x D x H): 90mm x 40.5mm x 155mmWeight: 470g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08162Net Price:

169,00 EURUnit: pcs

Managed switch, 4x 10/100 RJ-45 + 2x100 SFP,O/Open-Ring <10ms (ORing IES-2042PA)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4100 Mbps SFP Ports: 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, EEE 802.3ab dla LLDP (LinkLayer Discovery Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 1.2 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 20ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 95mm x 144.3mmWeight: 395g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06596Net Price:

354,00 EURUnit: pcs

Managed switch, 6x 10/100 RJ-45 + 2x10/1000RJ-45, O/Open-Ring <10ms (ORing IES-3062GT)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 61000 Base-T Ports in RJ45 Auto MDI/MDIX: 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3ab for1000BaseTX, IEEE 802.3x for Flow control, IEEE802.1D for STP (Spanning Tree Protocol), IEEE802.1p for COS (Class of Service), IEEE 802.1Q forVLAN Tagging, IEEE 802.1w for RSTP (RapidSpanning Tree Protocol), IEEE 802.1X forAuthentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision1000TX port indicator: Green for port Link/Act,Yellow for Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 8WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 722g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

10/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 11: Communication for Industry

Communication for industry

#06606Net Price:

427,00 EURUnit: pcs

Managed switch, 6x 10/100 RJ-45 + 2x100 MMSC, O/Open-Ring <10ms (ORingIES-3062FX-MM-SC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6100Base-FX Multimode ports (2km, 1310nm, SCconnector): 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control, IEEE 802.1D for STP(Spanning Tree Protocol), IEEE 802.1p for COS(Class of Service), IEEE 802.1Q for VLAN Tagging,IEEE 802.1w for RSTP (Rapid Spanning TreeProtocol), IEEE 802.1X for Authentication, IEEE802.3ad for LACP (Link Aggregation ControlProtocol), IEEE 1588 for Precise Time ProtocolClientMAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 9WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 735g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06609Net Price:

515,00 EURUnit: pcs

Managed switch, 6x 10/100 RJ-45 + 2x100 SMSC, O/Open-Ring <10ms (ORingIES-3062FX-SS-SC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6100Base-FX Singlemode ports (30km, 1550nm, SCconnector): 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control, IEEE 802.1D for STP(Spanning Tree Protocol), IEEE 802.1p for COS(Class of Service), IEEE 802.1Q for VLAN Tagging,IEEE 802.1w for RSTP (Rapid Spanning TreeProtocol), IEEE 802.1X for Authentication, IEEE802.3ad for LACP (Link Aggregation ControlProtocol), IEEE 1588 for Precise Time ProtocolClientMAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 9WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 735g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06600Net Price:

534,00 EURUnit: pcs

Managed switch, 6x 10/100 RJ-45 + 2x1000 MMSC, O/Open-Ring <10ms (ORingIES-3062GF-MM-SC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 61000Base-SX Multimode ports (550m, 850nm, SCconnector): 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3z for1000Base-X, IEEE 802.3x for Flow control, IEEE802.1D for STP (Spanning Tree Protocol), IEEE802.1p for COS (Class of Service), IEEE 802.1Q forVLAN Tagging, IEEE 802.1w for RSTP (RapidSpanning Tree Protocol), IEEE 802.1X forAuthentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol), IEEE 1588 forPrecise Time Protocol ClientMAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 740g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

11/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 12: Communication for Industry

Communication for industry

#06603Net Price:

663,00 EURUnit: pcs

Managed switch, 6x 10/100 RJ-45 + 2x1000 SMSC, O/Open-Ring <10ms (ORingIES-3062GF-SS-SC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 61000Base-LX Singlemode ports (10km, 1310nm, SCconnector): 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3z for1000Base-X, IEEE 802.3x for Flow control, IEEE802.1D for STP (Spanning Tree Protocol), IEEE802.1p for COS (Class of Service), IEEE 802.1Q forVLAN Tagging, IEEE 802.1w for RSTP (RapidSpanning Tree Protocol), IEEE 802.1X forAuthentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol), IEEE 1588 forPrecise Time Protocol ClientMAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 7WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 740g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06598Net Price:

395,00 EURUnit: pcs

Managed switch, 8x 10/100 RJ-45 + 2x1000 SFP,O/Open-Ring <10ms (ORing IES-3082GP)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 81000 Mbps SFP Ports: 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/CollisionFiber port indicator: Green for port Link/Act, Yellowfor Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 9WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 730g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06881Net Price:

680,00 EURUnit: pcs

Managed switch, 8x 10/100 RJ-45 PoE + 2slide-in SFP slots w/DDM / RJ-45, O/Open-Ring<10ms (ORing IPS-3082GC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIXw/PoE (PSE): 81000 COMBO with SFP: 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol), IEEE 802.1AB forLLDP (Link Layer Discovery Protocol), IEEE 802.3afPoE specifi cation (up to 15.4 Watts per port forP.S.E)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 1024Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, MSTP, O-Ring,Open-Ring, O-RSTPDDM Function: Voltage, Current, Temperature

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Amber - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Amber for Duplex/Collision1000X / Fiber port indicator: Green for port Link/Act,Amber for Link

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 9WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 74.6mm x 109.2mm x153.6mmWeight: 1100g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

12/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 13: Communication for Industry

Communication for industry

#06593Net Price:

320,00 EURUnit: pcs

Managed switch, 8x 10/100 RJ-45, O/Open-Ring<10ms (ORing IES-3080)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol), IEEE 1588 forPrecise Time Protocol ClientMAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 5.6 GbpsMax. Number of Available VLANs: 4096Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Flashing to indicatesystem operated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Yellow - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs. 12÷48VDC on 7-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 710g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06990Net Price:

598,00 EURUnit: pcs

Managed switch, 16x 10/100 RJ-45 + 2 slide-inSFP slots / RJ-45, O/Open-Ring <10ms (ORingIES-3162GC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 81000 COMBO with SFP: 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 7.2 GbpsMax. Number of Available VLANs: 4096IGMP multicast groups: 1024Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - indicates systemoperated in O-Ring Master modeFault indicator: Amber - Indicates unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Amber for Duplex/Collision10/100/1000TX RJ45 port indicator: Green for portLink/Act, Amber for 100MbpsFiber port indicator: Green for port Link/Act

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 12WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 74.3mm x 109.2mm x153.6mmWeight: 1100g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

13/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 14: Communication for Industry

Communication for industry

#08158Net Price:

424,00 EURUnit: pcs

Managed switch, 3x 10/1000 RJ-45 + 2x1000 SFPw/DDM, O/Open-Ring <20ms (ORing IES-3032GC)IGS-3032GC is a full gigabit managed RedundantRing Ethernet switch with 3x10/100/1000Base-T(X)and 2xGigabit combo ports. With complete supportof Ethernet Redundancy protocol, O-Ring (recoverytime < 20ms over 250 units of connection),Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE802.1s/w/D) can protect your mission-criticalapplications from network interruptions or temporarymalfunctions with its fast recovery technology. IGS-3032GC can be managed centralized andconvenient by a powerful windows utility -Open-Vision. The redundant DC power inputs guarantee anon-stop operation. The backup power input will takeover immediately when the primary DC power inputfails. IGC-3032GC provides relay outputs that can be setup to indicate events with urgency to notify or warnthe technicians, so they can quickly respond to themessage in priority. Therefore, the switch is one of the most reliablechoice for highly-managed and Fiber Ethernetapplication.Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 31000 Mbps SFP Ports: 2RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3z for 1000Base-X, IEEE 802.3ab for1000Base-T, IEEE 802.3x for Flow control, IEEE802.3ad for LACP (Link Aggregation ControlProtocol), IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1xfor Authentication, IEEE 802.1AB for LLDP (LinkLayer Discovery Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 10 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 256Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 150ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, MSTP, O-Ring,Open-Ring, O-RSTPDDM Function: Voltage, Current, Temperature

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Indicate systemoperated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Amber - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision1000X / Fiber port Indicator: Green for port Link/Act

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Triple DC inputs +12 ~ +48VDC or -12~ -48VDC on 7-pin terminal block, 12 ~ 45VDC onpower jackPower consumption (typical): 10WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 54.1mm x 106.1mm x145.4mmWeight: 1022g

Environmental

14/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 15: Communication for Industry

Communication for industryStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08157Net Price:

637,00 EURUnit: pcs

Managed switch, 4x 10/1000 RJ-45 + 4x100/1000SFP w/DDM, O/Open-Ring <20ms (ORingIES-3044GC)Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 4100/1000 Mbps SFP Ports: 4RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3z for 1000Base-X, IEEE 802.3ab for1000Base-T, IEEE 802.3x for Flow control, IEEE802.3ad for LACP (Link Aggregation ControlProtocol), IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1xfor Authentication, IEEE 802.1AB for LLDP (LinkLayer Discovery Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 10 GbpsMax. Number of Available VLANs: 256Number of VLAN IDs: VID 1 to 4094IGMP multicast groups: 1024Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 150ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, MSTP, O-Ring,Open-Ring, O-RSTPDDM Function: Voltage, Current, Temperature

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - Indicate systemoperated in O-Ring Master modeO-Ring indicator: Green - Indicate system operatedin O-Ring modeFault indicator: Amber - Indicate unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Yellow for Duplex/Collision1000X / Fiber port Indicator: Green for port Link/Act

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 25WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 74.3mm x 109.2mm x153.6mmWeight: 1075g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-14÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08167Net Price:

1 540,00 EURUnit: pcs

Managed switch, 16x 10/1000 RJ-45 / SFP + 8slide-in SFP slots, O/Open-Ring <20ms (ORingRGS-7168GCP-EU)Physical Ports10/100/1000 COMBO with SFP: 16100/1000 SFP Auto MDI/MDIX: 8RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 7.2 GbpsMax. Number of Available VLANs: 4096IGMP multicast groups: 1024Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - indicates systemoperated in O-Ring Master mode10/100TX RJ45 port indicator: Green for portLink/Act, Amber for Duplex/Collision10/100/1000TX RJ45 port indicator: Green for portLink/Act, Amber for 100MbpsFiber port indicator: Green for port Link/Act

PowerInput power: 100~240VAC with power cordPower consumption (typical): 33WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 431mm x 342mm x 44mmWeight: 4350g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

15/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 16: Communication for Industry

Communication for industry

#08165Net Price:

2 440,00 EURUnit: pcs

Managed switch, 24x 10/1000 RJ-45 + 2 SFPslots, PoE, O-Ring<20ms (ORingRGPS-7244GP-P)Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 241000 SFP: 4RS-232 Serial Console Port: RS-232 connector withconsole cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 7.2 GbpsMax. Number of Available VLANs: 4096IGMP multicast groups: 1024Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsPower / Ready indicator: Green - Ready LED x 3Ring Master indicator: Green - indicates systemoperated in O-Ring Master modeFault indicator: Amber - Indicates unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Amber for Duplex/Collision10/100/1000TX RJ45 port indicator: Green for portLink/Act, Amber for 100MbpsFiber port indicator: Green for port Link/Act

PowerInput power: One 100~240VAC with power cordPower consumption (typical): 36WPower consumption (full loaded): 756WOverload current protection: present

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 431mm x 342mm x 44mmWeight: 5740g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#08168Net Price:

1 150,00 EURUnit: pcs

Managed switch, 24x 10/1000 RJ-45 + 4 slide-inSFP slots, O/Open-Ring <20ms (ORingIES-4244GP-EU)Physical Ports10/100/1000 Base-T(X) Ports in RJ45 AutoMDI/MDIX: 241000 SFP: 4RS-232 Serial Console Port: RS-232 in RJ45connector with console cable (9600bps 8 N 1)

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X), IEEE 802.3x for Flowcontrol, IEEE 802.1D for STP (Spanning TreeProtocol), IEEE 802.1p for COS (Class of Service),IEEE 802.1Q for VLAN Tagging, IEEE 802.1w forRSTP (Rapid Spanning Tree Protocol), IEEE 802.1Xfor Authentication, IEEE 802.3ad for LACP (LinkAggregation Control Protocol)MAC Table: 8192 MAC addressesPriority Queues: 4Processing: Store-and-ForwardSwitching latency: 7 µsSwitching bandwidth: 7.2 GbpsMax. Number of Available VLANs: 4096IGMP multicast groups: 1024Port rate limiting: User DefineSecurity Features: Enable/disable ports, MAC basedport security, Port based network access control(802.1x), VLAN (802.1q ) to segregate and securenetwork traffic, Radius centralized passwordmanagement, SNMPv3 encrypted authentication andaccess securitySoftware Features: STP/RSTP (IEEE 802.1D/w),Redundant Ring (O-Ring) with recovery time lessthan 10ms over 250 units, TOS/Diffserv supported,Quality of Service (802.1p) for real-time traffic, VLAN(802.1Q) with VLAN tagging and GVRP supported,IGMP Snooping for multicast filtering, Portconfiguration, Port status, Port statistics, Portmonitoring, Port securityNetwork Redundancy: STP, RSTP, O-Ring,Open-Ring, O-RSTP

LED IndicatorsRing Master indicator: Green - indicates systemoperated in O-Ring Master modeFault indicator: Amber - Indicates unexpected eventoccurred10/100TX RJ45 port indicator: Green for portLink/Act, Amber for Duplex/Collision10/100/1000TX RJ45 port indicator: Green for portLink/Act, Amber for 100MbpsFiber port indicator: Green for port Link/Act

PowerInput power: 100~240VAC with power cordPower consumption (typical): 36WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 443,7mm x 200mm x 44mmWeight: 2700g

EnvironmentalStorage Temperature: -40÷85°C(-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

16/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 17: Communication for Industry

Communication for industry

Wireless communication

#06887Net Price:

385,00 EURUnit: pcs

Wireless outdoor access point, 1x 10/100 RJ-45(LAN + PoE PD) + 1x 802.11b/g (WLAN) (ORingIAP-6701-WG+)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 1PoE PD port: Present at ETH2, Fully compliant withIEEE 802.3af Power Device specification, Over load& short circuit protection, Isolation Voltage 1000VDC min., Isolation Resistance 100MΩ min.

WLAN interfaceOperating Mode: AP, Bridge, Repeater, AP-ClientAntenna: Built-in 12dBi panel antennaRadio Frequency Type: DSSSModulation IEEE802.11b: CCK, DQPSK, DBPSKModulation IEEE802.11g: OFDM with BPSK, OFDMwith QPSK, OFDM with 16QAM, OFDM with 64QAMFrequency Band: America/FCC 2.412~2.462 GHz(11 channels), Europe CE/ETSI 2.412~2.472 Ghz(13 channels)Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps,IEEE802.11g 6/9/12/18/24/36/48/54 MbpsTransmit Power: IEEE802.11b/g 18dBmReceiver Sensitivity: -81dBm @ 11Mbps PER< 8%,-64dBm @ 54Mbps PER< 10%Encryption Security: WEP (64-bit/128-bit keysupported), WPA, WPA2 802.11i (WEP and AESencryption), PSK (256-bit key pre-shared keysupported), Radius supported, TKIP encryptionWireless Security: SSID broadcast disable

PowerInput power: 48VDC on RJ-45 PoE connectorPower consumption (typical): 6W

Physical CharacteristicEnclosure: IP-67Dimension (W x D x H): 197.5mm x 63mm x197.5mmWeight: 1040g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 3 years

#06669Net Price:

385,00 EURUnit: pcs

Wireless router, 2x 10/100 RJ-45 (WAN + LAN) +1x 802.11a/b/g (WLAN) + 1x USB (ORing IAR-320)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2USB Host port: 1x USB 2.0

WLAN interfaceWAN Connection Type: Static/Dynamic IP, PPPoE,Modem (56K/GPRSG/3G/3.5G) dial upAntenna Connector: Reverse SMARadio Frequency Type: DSSSModulation IEEE802.11a: OFDM with BPSK, QPSK,16QAM, 64QAM, OFDM @ 54 Mbps, CCK @ 11/5.5Mbps, DQPSK @ 2 Mbps, DBSK @ 1 MbpsModulation IEEE802.11b: CCK, DQPSK, DBPSKModulation IEEE802.11g: OFDM with BPSK, QPSK,16QAM, 64QAMFrequency Band: America/FCC 2.412~2.462 GHz(11 channels), America/FCC 5.15~5.25 GHz (4channels), Europe CE/ETSI 2.412~2.472 Ghz (13channels), Europe CE/ETSI 5.15~5.25 GHz (4channels)Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps,IEEE802.11a/g 6/9/12/18/24/36/48/54 MbpsTransmit Power: IEEE802.11a/b/g 18dBmReceiver Sensitivity: -81dBm @ 11Mbps PER< 8%,-64dBm @ 54Mbps PER< 10%Encryption Security: WEP (64-bit/128-bit keysupported), WPA, WPA2 802.11i (WEP and AESencryption), PSK (256-bit key pre-shared keysupported), Radius supported, TKIP encryptionWireless Security: SSID broadcast disable

LED IndicatorsPower indicator PWR 1(2)(PoE) / Ready: GreenBlinking - Power is on and booting up, Green On -Power is on and functioning Normally10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsWLAN Link /ACT: Green - Link, Orange - Poor signalWLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%Fault indicator: Red - Ethernet link down or powerdown

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 6WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 803g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷55°C (14÷131°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 3 years

17/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 18: Communication for Industry

Communication for industry

#08188Net Price:

1 140,00 EURUnit: pcs

Wireless router, 2x 10/100 RJ-45 (WAN + LAN) +1x 802.11a/b/g (WLAN) + 1x USB (ORingTAR-3120-M12)ORing's Transporter series cellular VPN router isdesigned for industrial and rolling stock wirelessapplications, such as vehicle, and railwayapplications.TAR-3120-M12 is a reliable Dual-RFIEEE802.11a/b/g and IEEE 802.11b/g cellular VPNrouter with 2 ports LAN which is fully compliant withEN50155 certification. It supports 802.1X and MACfilter for security control. It can be configured tooperate in 3 modes of routing function:Dynamic/Static IP route, PPPoE authentication, andCellular Modem dial-up. Users can set up WLANenvironment to fulfill demands of various applicationsrapidly by dialing upcellular modem. TAR-3120-M12 EN50155 cellularVPN router use M-series connectors to ensure tight,robust connections, and guarantee reliable operationagainst environmental disturbances, such asvibration and shock. TAR-3120-M12 provides dualRF wireless interfaces, which can provide IEEE802.11 a/b/g and IEEE 802.11 b/g dual bandwireless communication and can be applied to fulfillany demands of wireless applications.TAR-3120-M12 provides dual Ethernet ports inswitch mode, so that you can use Daisy Chain toreduce the usage of Ethernet switch ports.Therefore, TAR-3120-M12 is one of the most reliablechoices for rolling stock applications on the wirelessnetwork.Physical Ports10/100Base-T(X) Ports: RJ45 Auto MDI/MDIX 2(M12 connector - D coding)

WLAN InterfaceWAN Connection Type: Static/Dynamic IP, PPPoE,3G Modem dial-upAntenna and Connector: 2 x 2 dBi (b/g mode) / 3dBi(a mode) on Reverse SMA connector, 2 x 2 dBi(Cellular modem) on Reverse SMA connectorRadio Frequency Type: DSSS, OFDM

ModulationIEEE 802.11a: OFDM with BPSK, QPSK, 16QAM,64QAMIEEE 802.11b: CCK, DQPSK, DBPSKIEEE 802.11g: OFDM with BPSK, QPSK, 16QAM,64QAMFrequency Band: America / FCC 2.412~2.462 GHz(11 channels), 5.15 to 5.825 GHz (13 channels),Europe CE / ETSI 2.412~2.472 Ghz (13 channels),5.15 to 5.724 GHz (19 channels)

Transmission RateIEEE 802.11b: 1 / 2 / 5.5 / 11 MbpsIEEE 802.11a/g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54MbpsTransmit Power: IEEE802.11a/b/g 20dBm max

Receiver SensitivityIEEE 802.11a: -77dBm+/-2.0dB @ 54Mbps PER<10%IEEE 802.11b: -86dBm+/-1.5dB @ 11Mbps PER<8%;IEEE 802.11g: -78dBm+/-1.5dB @ 54Mbps PER<10%

Encryption SecurityWEP: (64-bit and 128-bit key supported)WPA/WPA2: 802.11i(WEP and AES encryption)WPA-PSK: (256-bit key pre-shared key supported)802.1X: Authentication supportedTKIP: encryptionWireless Security: SSID broadcast disable

LED IndicatorsPower Indicator: Green for Power indicatorRJ45 Port Indicator: Green for port Link/ Act at100Mbps. Amber for port Link/ Act at 10Mbps.WLAN LEDs: Green for WLAN Link/ ActCellular modem LED: Green for Cellular modemLink/ Act

Fault ContactRelay: Relay output to carry capacity of 3A at24VDC

PowerRedundant Input Power: Dual DC inputs. 12~48VDCon M23 connector (24VDC typ)Power Consumption: 9.6 WOverload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsEnclosure: IP-40Dimensions: (W x D x H) 125(W) x 65(D) x 196(H)mm (4.92 x 2.56 x 7.72 inch.)Weight (g): 1050 g

Environmental

18/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 19: Communication for Industry

Communication for industryStorage Temperature: -40 to 85°C (-40 to 185°F)Operating Temperature: -20 to 70°C (-4 to 158°F)Operating Humidity: 5% to 95% Non-condensingEMI: FCC Part 15, CISPR (EN55022) class A,EN50155 (EN50121-3-2)EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27, EN61373Free Fall: IEC60068-2-32Vibration: IEC60068-2-6, EN61373Cooling: EN60068-2-1Dry Heat: EN60068-2-2Safety: EN60950-1Warranty: 3 years

Media converters

#08223Net Price:

107,00 EURUnit: pcs

Media converter 1x 10/100Base-TX + 1x100Base-FX fiber (ORing IMC-111FB-MM-SC)IMC-111 series are the cost-effective solution for theconversion between 10/100Base-T(X) and100Base-FX interface, as they allow you to extendcommunication distance by optical fiber. IMC-111series support MDI/MDIX auto detection, so youdon't need to use crossover wires. IMC-111 serieshave wide operating temperature range from -40 ~70°C and have dual power inputs, each accepting awide voltage range from 12 ~ 48 VDC. HenceIMC-111 series are suitable for harsh operatingenvironments.Therefore the IMC-111 series are reliable mediaconverters that can satisfy most demand of differentoperating environments.Physical PortsPort RJ-45 10/100 Base-TX: 1100Base-FX (SFP): 1Processing: Store-and-Forward

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control

LED IndicatorsPower / Ready indicator: Green Ready LED x 110/100TX RJ45 port indicator: Green for portLink/Act, Yellow for duplex

PowerInput power: 12÷48 VDC voltage power inputPower consumption (typical): 4.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 26,1mm x 95mm x 70mmWeight: 218g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 yearsIMC-111 series also support the LFP (Link FaultPass-through) feature. When one side of the linkfails, the other side continues transmitting packetsand waits for a response that never arrives from thedisconnected side. Use the DIP-Switch to enable theLFP function, and then IMC-111 series will force thelink to shutdown as soon as noticed that the otherlink has failed, giving the application software achance to react to the situation.

#08163Net Price:

99,50 EURUnit: pcs

Media converter 2x 10/100TX (RJ-45) + 1x 100FX(SFP) (ORing IMC-111PB) LFPIMC-111 series are the cost-effective solution for theconversion between 10/100Base-T(X) and100Base-FX interface, as they allow you to extendcommunication distance by optical fiber. IMC-111series support MDI/MDIX auto detection, so youdon't need to use crossover wires. IMC-111 serieshave wide operating temperature range from -40 ~70°C and have dual power inputs, each accepting awide voltage range from 12 ~ 48 VDC. HenceIMC-111 series are suitable for harsh operatingenvironments.Therefore the IMC-111 series are reliable mediaconverters that can satisfy most demand of differentoperating environments.Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2100Base-FX (SFP): 1Processing: Store-and-Forward

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3x for Flow control

LED IndicatorsPower / Ready indicator: Green Ready LED x 110/100TX RJ45 port indicator: Green for portLink/Act, Yellow for duplex

PowerInput power: 12÷48 VDC voltage power inputPower consumption (typical): 4.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 26,1mm x 95mm x 70mmWeight: 210g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 yearsIMC-111 series also support the LFP (Link FaultPass-through) feature. When one side of the linkfails, the other side continues transmitting packetsand waits for a response that never arrives from thedisconnected side. Use the DIP-Switch to enable theLFP function, and then IMC-111 series will force thelink to shutdown as soon as noticed that the otherlink has failed, giving the application software achance to react to the situation.

#08164Net Price:

116,00 EURUnit: pcs

Media converter 2x 10/100TX (RJ-45) + 1x 100FX(SM SC) (ORing IMC-121FB-SS-SC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2100Base-FX Singlemode ports (30KM, 1310nm, SCconnector): 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX

LED IndicatorsPower / Ready indicator: Green Ready LED x 110/100TX RJ45 port indicator: Green for portLink/Act, Yellow for duplex

PowerInput power: 12÷48 VDC voltage power inputPower consumption (typical): 4.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 26,1mm x 95mm x 70mmWeight: 210g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

19/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 20: Communication for Industry

Communication for industry

#06572Net Price:

91,00 EURUnit: pcs

Media converter 2x 10/100TX (RJ-45) + 1x 100FX(SM SC), standard temperature model (ORingIMC-1021FX-SS-SC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2100Base-FX Singlemode ports (30KM, 1550nm, SCconnector): 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX

LED IndicatorsPower / Ready indicator: Green Ready LED x 110/100TX RJ45 port indicator: Green for portLink/Act, Yellow for duplex

PowerInput power: 9÷30 VDC voltage power inputPower consumption (typical): 4.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 64mm x 102mm x 25mmWeight: 300g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06888Net Price:

178,00 EURUnit: pcs

Media converter 1x 10/1000TX (RJ-45) + 1x1000FX (MM SC) (ORing IGMC-1011GF-MM-SC)Physical Ports10/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 11000Base-FX Multimode ports (550m, 850nm, SCconnector): 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3ab for 1000Base-T, IEEE802.3z for1000Base-X

LED IndicatorsPower / Ready indicator: Green Ready LED x 2Fault indicator: Amber - Indicate power failure10/1000TX RJ45 port indicator: Green for portLink/Act, Amber for duplex1000X Port Indicator: Green for port Link/Act

Fault contactRelay: Relay output to carry capacity of 1A at 24VDCDip Switch: Relay output function enable / disable bydip switch

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 3.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 26.1mm x 144.3mm x94.9mmWeight: 400g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06890Net Price:

123,00 EURUnit: pcs

Media converter 1x 10/1000TX (RJ-45) + 1x1000FX (SFP) (ORing IGMC-1011GP)Physical Ports10/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 11000Base-FX SFP ports: 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3ab for 1000Base-T, IEEE802.3z for1000Base-X

LED IndicatorsPower / Ready indicator: Green Ready LED x 2Fault indicator: Amber - Indicate power failure10/1000TX RJ45 port indicator: Green for portLink/Act, Amber for duplex1000X Port Indicator: Green for port Link/Act

Fault contactRelay: Relay output to carry capacity of 1A at 24VDCDip Switch: Relay output function enable / disable bydip switch

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 3.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 26.1mm x 144.3mm x94.9mmWeight: 380g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

20/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 21: Communication for Industry

Communication for industry

#06889Net Price:

216,00 EURUnit: pcs

Media converter 1x 10/1000TX (RJ-45) + 1x1000FX (SM SC) (ORing IGMC-1011GF-SS-SC)Physical Ports10/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 11000Base-FX Singlemode ports (10km, 1310nm, SCconnector): 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX, IEEE802.3ab for 1000Base-T, IEEE802.3z for1000Base-X

LED IndicatorsPower / Ready indicator: Green Ready LED x 2Fault indicator: Amber - Indicate power failure10/1000TX RJ45 port indicator: Green for portLink/Act, Amber for duplex1000X Port Indicator: Green for port Link/Act

Fault contactRelay: Relay output to carry capacity of 1A at 24VDCDip Switch: Relay output function enable / disable bydip switch

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 3.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 26.1mm x 144.3mm x94.9mmWeight: 400g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06648Net Price:

107,00 EURUnit: pcs

Media converter 2x 10/100TX (RJ-45) + 1x 100FX(MM SC) (ORing IMC-121FB-MM-SC)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2100Base-FX Multimode ports (2KM, 1310nm, SCconnector): 1

TechnologyEthernet Standards: IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseT(X) and 100BaseFX

LED IndicatorsPower / Ready indicator: Green Ready LED x 110/100TX RJ45 port indicator: Green for portLink/Act, Yellow for duplex

PowerInput power: 12÷48 VDC voltage power inputPower consumption (typical): 4.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x H x D): 26,1mm x 95mm x 70mmWeight: 210g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -40÷70°C (-40÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06891Net Price:

51,20 EURUnit: pcs

Media converter 1x RS232 (DB9) + 1x RS-422/485(TB) (ORing ISC-1112)Physical PortsRS-232 Connector: DB9 (Female)RS-422/485 Connector: 10-pin terminal blockRS-232 Signals: TxD, RxD, GNDRS-422/485 Signals (RS422): TxD+, TxD-, RxD+,RxD-RS-422/485 Signals (RS485): Data+, Data-, GNDBaud Rate: 300bps to 115.2KbpsData bit: 5, 6, 7, 8Stop bit: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: XON/XOFF (software), Auto HardwareDirection Control for RS-485

LED IndicatorsPower Indicator: Green x1TxD Indicator: Green x1RxD Indicator: Green x1

PowerInput power: 10÷30VDC on 10-pin terminal blockPower consumption (typical): 2.2W

Physical CharacteristicEnclosure: ABSDimension (W x D x H): 71.2mm x 25.3mm x100.6mmWeight: 130g

EnvironmentalStorage Temperature: -25÷85°C (-13÷185°F)Operating Temperature: -10÷70°C (14÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 2 years

21/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 22: Communication for Industry

Communication for industry

#06892Net Price:

61,00 EURUnit: pcs

Media converter 1x RS232 (DB9) + 1x RS-422/485(TB, 3kV isolated) (ORing ISC-1112-I)Physical PortsRS-232 Connector: DB9 (Female)RS-422/485 Connector: 10-pin terminal blockopto-isolated to 3kVRS-232 Signals: TxD, RxD, GNDRS-422/485 Signals (RS422): TxD+, TxD-, RxD+,RxD-RS-422/485 Signals (RS485): Data+, Data-, GNDBaud Rate: 300bps to 115.2KbpsData bit: 5, 6, 7, 8Stop bit: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: XON/XOFF (software), Auto HardwareDirection Control for RS-485

LED IndicatorsPower Indicator: Green x1TxD Indicator: Green x1RxD Indicator: Green x1

PowerInput power: 10÷30VDC on 10-pin terminal blockPower consumption (typical): 2.2W

Physical CharacteristicEnclosure: ABSDimension (W x D x H): 71.2mm x 25.3mm x100.6mmWeight: 130g

EnvironmentalStorage Temperature: -25÷85°C (-13÷185°F)Operating Temperature: -10÷70°C (14÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 2 years

#06893Net Price:

66,30 EURUnit: pcs

Repeater 2x RS-422/485 (TB, 3kV isolated)(ORing ISC-1212-I)Physical PortsRS-422/485 Connector: 10-pin terminal blockopto-isolated to 3kVRS-422/485 Signals (RS422): TxD+, TxD-, RxD+,RxD-RS-422/485 Signals (RS485): Data+, Data-, GNDBaud Rate: 300bps to 115.2KbpsData bit: 5, 6, 7, 8Stop bit: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: XON/XOFF (software), Auto HardwareDirection Control for RS-485

LED IndicatorsPower Indicator: Green x1TxD Indicator: Green x1RxD Indicator: Green x1

PowerInput power: 10÷30VDC on 10-pin terminal blockPower consumption (typical): 0.7W

Physical CharacteristicEnclosure: ABSDimension (W x D x H): 71.2mm x 25.3mm x100.6mmWeight: 130g

EnvironmentalStorage Temperature: -25÷85°C (-13÷185°F)Operating Temperature: -10÷70°C (14÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 2 years

#06896Net Price:

88,00 EURUnit: pcs

Media converter 1x USB (B) + 1x RS-232/422/485(TB, 3kV isolated) (ORing ISC-1310U-I)Physical PortsUSB Connector: B-type (Female), USB v1.1RS-232/422/485 Connector: 10-pin terminal blockopto-isolated to 3kVRS-232 Signals: TxD, RxD, GNDRS-422/485 Signals (RS422): TxD+, TxD-, RxD+,RxD-RS-422/485 Signals (RS485): Data+, Data-, GNDBaud Rate: 300bps to 115.2KbpsData bit: 5, 6, 7, 8Stop bit: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: XON/XOFF (software), Auto HardwareDirection Control for RS-485

LED IndicatorsPower Indicator: Green x1TxD Indicator: Green x1RxD Indicator: Green x1

DriversOperating System Support: Windows95/98/ME/2000/XP, Linux

PowerInput power: USB bus poweredPower consumption (typical): 0.65W

Physical CharacteristicEnclosure: ABSDimension (W x D x H): 71.2mm x 25.3mm x100.6mmWeight: 130g

EnvironmentalStorage Temperature: -25÷85°C (-13÷185°F)Operating Temperature: -10÷70°C (14÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 2 years

22/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 23: Communication for Industry

Communication for industry

#06895Net Price:

85,10 EURUnit: pcs

Media converter 1x USB (B) + 1x RS-422/485 (TB,3kV isolated) (ORing ISC-1210U-I)Physical PortsUSB Connector: B-type (Female), USB v1.1RS-422/485 Connector: 10-pin terminal blockopto-isolated to 3kVRS-422/485 Signals (RS422): TxD+, TxD-, RxD+,RxD-RS-422/485 Signals (RS485): Data+, Data-, GNDBaud Rate: 300bps to 115.2KbpsData bit: 5, 6, 7, 8Stop bit: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: XON/XOFF (software), Auto HardwareDirection Control for RS-485

LED IndicatorsPower Indicator: Green x1TxD Indicator: Green x1RxD Indicator: Green x1

DriversOperating System Support: Windows95/98/ME/2000/XP, Linux

PowerInput power: USB bus poweredPower consumption (typical): 0.65W

Physical CharacteristicEnclosure: ABSDimension (W x D x H): 71.2mm x 25.3mm x100.6mmWeight: 130g

EnvironmentalStorage Temperature: -25÷85°C (-13÷185°F)Operating Temperature: -10÷70°C (14÷158°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 2 years

23/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 24: Communication for Industry

Communication for industry

Serial device servers

#06885Net Price:

195,00 EURUnit: pcs

Device server, 4x USB 2.0 (A) + 1x 10/100 RJ-45(LAN) (ORing IUSB-9041)Physical Ports10/100Base-T(X) Port in RJ-45 Auto MDI/MDIX: 1

USB PortsConnector: USB 2.0 x 4Operation Mode: 1.0 / 1.1 / 2.0 support

LED IndicatorsPower indicator: Power LED x 3Ready indicator: Green for readyRelay indicator: Amber for fault relay10/100TX RJ-45 port indicator: Green for portLink/Act, Amber for data transmittedUSB indicator: Green for USB port activated

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput Power: Triple DC inputs. 12÷48VDC on 6-pinterminal block and power jackPower Consumption (Typ.): 4W

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 94.9mm x144.3mmWeight: 0,4kg

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06886Net Price:

244,00 EURUnit: pcs

Device server, 4x USB 2.0 (A) + 1x 10/100 RJ-45(LAN) + 1x 802.11b/g (WLAN) (ORingIUSB-9041-WG)Physical Ports10/100Base-T(X) Port in RJ-45 Auto MDI/MDIX: 1

USB PortsConnector: USB 2.0 x 4Operation Mode: 1.0 / 1.1 / 2.0 support

WLAN interfaceOperating Mode: ClientAntenna Connector: Reverse SMARadio Frequency Type: DSSSModulation IEEE802.11b: CCK, DQPSK, DBPSKModulation IEEE802.11g: OFDM with BPSK, OFDMwith QPSK, OFDM with 16QAM, OFDM with 64QAMFrequency Band: America/FCC 2.412~2.462 GHz(11 channels), Europe CE/ETSI 2.412~2.472 Ghz(13 channels)Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps,IEEE802.11g 6/9/12/18/24/36/48/54 MbpsTransmit Power: IEEE802.11b/g 16dBmReceiver Sensitivity: -81dBm @ 11Mbps PER< 8%,-64dBm @ 54Mbps PER< 10%Encryption Security: WEP (64-bit/128-bit keysupported), WPA, WPA2 802.11i (WEP and AESencryption), PSK (256-bit key pre-shared keysupported), Radius supported, TKIP encryption

LED IndicatorsPower indicator: Power LED x 3Ready indicator: Green for readyWLAN indicator: Green for Link/ActRelay indicator: Amber for fault relay10/100TX RJ-45 port indicator: Green for portLink/Act, Amber for data transmittedUSB indicator: Green for USB port activated

Fault contactRelay: Relay output to carry capacity of 1A at24VDC

PowerInput Power: Triple DC inputs. 12÷48VDC on 6-pinterminal block and power jackPower Consumption (Typ.): TBD

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 26.1mm x 94.9mm x144.3mmWeight: TBD

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06750Net Price:

79,30 EURUnit: pcs

Device server, 1x RS-232 + 1x 10/100 RJ-45 (LAN)(ORing IDS-5011)Physical Ports10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 1

Serial PortsConnector: DB9 x1Operation Mode: RS-232Serial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 3-pinterminal blockPower consumption (typical): 4WOverload current protection: present

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 72x29.4x123.4 mmWeight: 327g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

24/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 25: Communication for Industry

Communication for industry

#06573Net Price:

160,00 EURUnit: pcs

Device server, 1x RS-232/422/485 + 1x 100 MMSC (LAN) (ORing IDS-5011FX-MM)Physical Ports100Base-FX Multimode ports (2km, 1310nm, SCconnector): 1

Serial PortsConnector: DB9 x1Operation Mode: RS-232, RS-422, RS-485 4/2-wire,can be configured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDRS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsFiber port indicator: Green for port Link/Act at100MbpsSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 3-pinterminal blockPower consumption (typical): 4WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 72mm x 100mm x 31mmWeight: 325g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06574Net Price:

196,00 EURUnit: pcs

Device server, 1x RS-232/422/485 + 1x 100 SM SC(LAN) (ORing IDS-5011FX-SS)Physical Ports100Base-FX Singlemode ports (30km, 1550nm, SCconnector): 1

Serial PortsConnector: DB9 x1Operation Mode: RS-232, RS-422, RS-485 4/2-wire,can be configured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDRS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsFiber port indicator: Green for port Link/Act at100MbpsSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 3-pinterminal blockPower consumption (typical): 4WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 72mm x 100mm x 31mmWeight: 325g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06575Net Price:

103,00 EURUnit: pcs

Device server, 1x RS-232/422/485 + 2x 10/100RJ-45 (LAN) (ORing IDS-5012)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2

Serial PortsConnector: DB9 x1Operation Mode: RS-232, RS-422, RS-485 4/2-wire,can be configured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDRS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 3-pinterminal blockPower consumption (typical): 4WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 72x29.4x123.4 mmWeight: 327g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

25/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 26: Communication for Industry

Communication for industry

#06578Net Price:

283,00 EURUnit: pcs

Device server, 4x RS-232/422/485 + 2x 10/100RJ-45 (LAN + PoE PD) (ORing IDS-5042+)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2PoE PD port: Present at ETH2, Fully compliant withIEEE 802.3af Power Device specification, Over load& short circuit protection, Isolation Voltage 1000VDC min., Isolation Resistance 100MΩ min.

Serial PortsConnector: DB9 x4Operation Mode: RS-232, RS-422, RS-485 4/2-wire,can be configured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDRS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2)(PoE) / Ready: Red On -Power is on and booting up, Red Blinking - Indicatesan IP conflict or DHCP or BOOTP server did notrespond properly, Green On - Power is on andfunctioning Normally, Green Blinking - Located byAdministrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 682g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06577Net Price:

263,00 EURUnit: pcs

Device server, 4x RS-232/422/485 + 2x 10/100RJ-45 (LAN) (ORing IDS-5042)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2

Serial PortsConnector: DB9 x4Operation Mode: RS-232, RS-422, RS-485 4/2-wire,can be configured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDRS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 678g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

#06576Net Price:

363,00 EURUnit: pcs

Device server, 4x RS-422/485 (2kV isolated) + 2x10/100 RJ-45 (LAN + PoE PD) (ORing IDS-5042-I+)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2PoE PD port: Present at ETH2, Fully compliant withIEEE 802.3af Power Device specification, Over load& short circuit protection, Isolation Voltage 1000VDC min., Isolation Resistance 100MΩ min.

Serial PortsConnector: 5 pin terminal block x 4 (2kV isolated)Operation Mode: RS-422, RS-485 4/2-wire, can beconfigured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2)(PoE) / Ready: Red On -Power is on and booting up, Red Blinking - Indicatesan IP conflict or DHCP or BOOTP server did notrespond properly, Green On - Power is on andfunctioning Normally, Green Blinking - Located byAdministrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal blockPower consumption (typical): 5.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 667g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷60°C (14÷140°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 5 years

26/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 27: Communication for Industry

Communication for industry

#06579Net Price:

173,00 EURUnit: pcs

Device server, 1x RS-232/422/485 + 1x 10/100RJ-45 (LAN) + 1x 802.11b/g (WLAN) (ORingIDS-5011-WG)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 1

WLAN interfaceOperating Mode: ClientAntenna Connector: Reverse SMARadio Frequency Type: DSSSModulation IEEE802.11b: CCK, DQPSK, DBPSKModulation IEEE802.11g: OFDM with BPSK, OFDMwith QPSK, OFDM with 16QAM, OFDM with 64QAMFrequency Band: America/FCC 2.412~2.462 GHz(11 channels), Europe CE/ETSI 2.412~2.472 Ghz(13 channels)Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps,IEEE802.11g 6/9/12/18/24/36/48/54 MbpsTransmit Power: IEEE802.11b/g 16dBmReceiver Sensitivity: -81dBm @ 11Mbps PER< 8%,-64dBm @ 54Mbps PER< 10%Encryption Security: WEP (64-bit/128-bit keysupported), WPA, WPA2 802.11i (WEP and AESencryption), PSK (256-bit key pre-shared keysupported), Radius supported, TKIP encryption

Serial PortsConnector: DB9 x1Operation Mode: RS-232, RS-422, RS-485 4/2-wire,can be configured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDRS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsWLAN Link /ACT: Green - LinkSerial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 3-pinterminal blockPower consumption (typical): 5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 72mm x 100mm x 31mmWeight: 346g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷55°C (14÷131°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 3 years

#06581Net Price:

332,00 EURUnit: pcs

Device server, 4x RS-232/422/485 + 2x 10/100RJ-45 (LAN) + 1x 802.11b/g (WLAN) (ORingIDS-5042-WG)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2

WLAN interfaceOperating Mode: ClientAntenna Connector: Reverse SMARadio Frequency Type: DSSSModulation IEEE802.11b: CCK, DQPSK, DBPSKModulation IEEE802.11g: OFDM with BPSK, OFDMwith QPSK, OFDM with 16QAM, OFDM with 64QAMFrequency Band: America/FCC 2.412~2.462 GHz(11 channels), Europe CE/ETSI 2.412~2.472 Ghz(13 channels)Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps,IEEE802.11g 6/9/12/18/24/36/48/54 MbpsTransmit Power: IEEE802.11b/g 18dBmReceiver Sensitivity: -81dBm @ 11Mbps PER< 8%,-64dBm @ 54Mbps PER< 10%Encryption Security: WEP (64-bit/128-bit keysupported), WPA, WPA2 802.11i (WEP and AESencryption), PSK (256-bit key pre-shared keysupported), Radius supported, TKIP encryption

Serial PortsConnector: DB9 x4Operation Mode: RS-232, RS-422, RS-485 4/2-wire,can be configured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GNDRS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsWLAN Link /ACT: Green - LinkWLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%Serial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 6.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 691g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷55°C (14÷131°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 3 years

#06580Net Price:

398,00 EURUnit: pcs

Device server, 4x RS-422/485 (2kV isolated) + 2x10/100 RJ-45 (LAN) + 1x 802.11b/g (WLAN)(ORing IDS-5042-IWG)Physical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2

WLAN interfaceOperating Mode: ClientAntenna Connector: Reverse SMARadio Frequency Type: DSSSModulation IEEE802.11b: CCK, DQPSK, DBPSKModulation IEEE802.11g: OFDM with BPSK, OFDMwith QPSK, OFDM with 16QAM, OFDM with 64QAMFrequency Band: America/FCC 2.412~2.462 GHz(11 channels), Europe CE/ETSI 2.412~2.472 Ghz(13 channels)Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps,IEEE802.11g 6/9/12/18/24/36/48/54 MbpsTransmit Power: IEEE802.11b/g 18dBmReceiver Sensitivity: -81dBm @ 11Mbps PER< 8%,-64dBm @ 54Mbps PER< 10%Encryption Security: WEP (64-bit/128-bit keysupported), WPA, WPA2 802.11i (WEP and AESencryption), PSK (256-bit key pre-shared keysupported), Radius supported, TKIP encryption

Serial PortsConnector: 5 pin terminal block x 4 (2kV isolated)Operation Mode: RS-422, RS-485 4/2-wire which, beconfigured by DS-ToolSerial Baud Rate: 110 bps to 460.8 KbpsData Bits: 5, 6, 7, 8Parity: odd, even, none, mark, spaceStop Bits: 1, 1.5, 2RS-422: Tx+,Tx-,Rx+,Rx-,GNDRS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GNDRS-485 (2-wire): Data+,Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready: Red On - Poweris on and booting up, Red Blinking - Indicates an IPconflict or DHCP or BOOTP server did not respondproperly, Green On - Power is on and functioningNormally, Green Blinking - Located by Administrator10/100TX RJ45 port indicator: Green for portLink/Act at 100Mbps, Yellow for port Link/Act at10MbpsWLAN Link /ACT: Green - LinkWLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%Serial TX / RX LEDs: Red - Serial port is receivingdata, Green - Serial port is transmitting data

PowerInput power: Dual DC inputs. 12÷48VDC on 6-pinterminal block, 12÷45VDC on power jackPower consumption (typical): 6.5WOverload current protection: presentReverse polarity protection: present on terminalblock

Physical CharacteristicEnclosure: IP-30Dimension (W x D x H): 52mm x 106mm x 144mmWeight: 675g

EnvironmentalStorage Temperature: -40÷85°C (-40÷185°F)Operating Temperature: -10÷55°C (14÷131°F)Operating Humidity: 5%÷95% Non-condensing

Regulatory approvalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6Safety: EN60950

WarrantyWarranty period: 3 years

27/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 28: Communication for Industry

Communication for industry

Transceivers

#05949Net Price:

17,80 EURUnit: pcs

Module, SFP 1x 100 Mbps LC MM, 2 km, TX: 1310nm (WO-SML-0113-002K-I)Port: 1x 155 Mbps ATM LC MMTX wavelength: 1310 nmRX wavelength: 1310 nmMax. distance: 2 kmCable type: 50/125, 62.5/125, 100/140 µmModule type: SFPWarranty period: 1 yearSupports: SDH/STM-1, SONET/OC-3, Fast Ethernet

#06732Net Price:

17,80 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC MM, 550 m, Tx:850nm (WO-SML-1285-550M-I)Port: 1x 1000 Mbps LC MMTX wavelength: 850 nmRX wavelength: 850 nmMax. distance: 550 mCable type: 50/125, 62.5/125, 100/140 µmOperating temperature: -40°C ÷ 85°CModule type: SFP

#06752Net Price:

19,40 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC MM, 550 m, Tx:850nm, w/DDMI diagnostics(WO-SML-1285-550M-DI)Port: 1x 1000 Mbps LC MMTX wavelength: 850 nmRX wavelength: 850 nmMax. distance: 550 mCable type: 50/125, 62.5/125, 100/140 µmOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFP

#08175Net Price:

23,10 EURUnit: pcs

Module, SFP 1x 100 Mbps LC SM, 40 km, Tx:1310nm, w/DDMI diagnostics (WO-SSL-0113-040K-D-I)Port: 1x 100 Mbps LC SMTX wavelength: 1310 nmRX wavelength: 1310 nmMax. distance: 40 kmCable type: 50/125, 62.5/125, 100/140 µmOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFPWarranty period: 1 year

#06733Net Price:

17,80 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC SM, 20 km(WO-SSL-1213-020K-I)Port: 1x 1000 Mbps LC SMTX wavelength: 1310 nmRX wavelength: 1310 nmMax. distance: 20 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µm Operating temperature: -40°C ÷ 85°CModule type: SFP

#06753Net Price:

19,40 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC SM, 20 km,w/DDMI diagnostics (WO-SSL-1213-020K-DI)Port: 1x 1000 Mbps LC SMTX wavelength: 1310 nmRX wavelength: 1310 nmMax. distance: 20 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µm Operating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFP

#06734Net Price:

20,40 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC SM, 40 km(WO-SSL-1213-040K-I)Port: 1x 1000 Mbps LC SMTX wavelength: 1310 nmRX wavelength: 1310 nmMax. distance: 40 kmCable type: 50/125, 62.5/125, 100/140 µmOperating temperature: -40°C ÷ 85°CModule type: SFPWarranty period: 1 year

#06754Net Price:

22,10 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC SM, 40 km,w/DDMI diagnostics (WO-SSL-1213-040K-DI)Port: 1x 1000 Mbps LC SMTX wavelength: 1310 nmRX wavelength: 1310 nmMax. distance: 40 kmCable type: 50/125, 62.5/125, 100/140 µmOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFPWarranty period: 1 year

#06735Net Price:

50,00 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC SM, 80 km(WO-SSL-1215-080K-I)Port: 1x 1000 Mbps LC SMTX wavelength: 1550 nmRX wavelength: 1550 nmMax. distance: 80 kmCable type: 50/125, 62.5/125, 100/140 µmOperating temperature: -40°C ÷ 85°CModule type: SFPWarranty period: 1 year

#06755Net Price:

51,60 EURUnit: pcs

Module, SFP 1x 1000 Mbps LC SM, 80 km,w/DDMI diagnostics (WO-SSL-1215-080K-DI)Port: 1x 1000 Mbps LC SMTX wavelength: 1550 nmRX wavelength: 1550 nmMax. distance: 80 kmCable type: 50/125, 62.5/125, 100/140 µmOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFPWarranty period: 1 year

#06737Net Price:

48,70 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC LM, 20 km, WDMTX:1550 nm (WO-SWS-1215-020K-I)Port: 1x 1000 Mbps SC SMTX wavelength: 1550 nmRX wavelength: 1310 nmMax. distance: 20 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CModule type: SFPWarranty period: 1 year

#06757Net Price:

50,30 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC LM, 20 km, WDMTX:1550 nm, w/DDMI diagnostics(WO-SWS-1215-020K-DI)Port: 1x 1000 Mbps SC SMTX wavelength: 1550 nmRX wavelength: 1310 nmMax. distance: 20 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFPWarranty period: 1 year

28/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 29: Communication for Industry

Communication for industry

#06736Net Price:

22,60 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC SM, 20 km, WDMTX:1310 nm (WO-SWS-1213-020K-I)Port: 1x 1000 Mbps SC SMTX wavelength: 1310 nmRX wavelength: 1550 nmMax. distance: 20 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CModule type: SFPWarranty period: 1 year

#06756Net Price:

24,20 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC SM, 20 km, WDMTX:1310 nm, w/DDMI diagnostics(WO-SWS-1213-020K-DI)Port: 1x 1000 Mbps SC SMTX wavelength: 1310 nmRX wavelength: 1550 nmMax. distance: 20 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFPWarranty period: 1 year

#06738Net Price:

26,10 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC SM, 40 km, WDMTX:1310 nm (WO-SWS-1213-040K-I)Port: 1x 1000 Mbps SC SMTX wavelength: 1310 nmRX wavelength: 1550 nmMax. distance: 40 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CModule type: SFPWarranty period: 1 year

#06758Net Price:

27,70 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC SM, 40 km, WDMTX:1310 nm, w/DDMI diagnostics(WO-SWS-1213-040K-DI)Port: 1x 1000 Mbps SC SMTX wavelength: 1310 nmRX wavelength: 1550 nmMax. distance: 40 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFPWarranty period: 1 year

#06739Net Price:

48,70 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC SM, 40 km, WDMTX:1550 nm (WO-SWS-1215-040K-I)Port: 1x 1000 Mbps SC SMTX wavelength: 1550 nmRX wavelength: 1310 nmMax. distance: 40 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CModule type: SFPWarranty period: 1 year

#06759Net Price:

50,20 EURUnit: pcs

Module, SFP 1x 1000 Mbps SC SM, 40 km, WDMTX:1550 nm, w/DDMI diagnostics(WO-SWS-1215-040K-DI)Port: 1x 1000 Mbps SC SMTX wavelength: 1550 nmRX wavelength: 1310 nmMax. distance: 40 kmCable type: 8.3/125, 8.7/125, 9/125, 10/125 µmWave Division Multiplexing (WDM): yesOperating temperature: -40°C ÷ 85°CDDMI: yesModule type: SFPWarranty period: 1 year

29/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 30: Communication for Industry

Communication for industry

Power supplies

#06674Net Price:

18,40 EURUnit: pcs

Power supply 10W 24VDC, mini, DIN TS35 (MeanWell MDR-10-24)OutputDC Voltage: 24VRated current: 0.42ACurrent Range: 0÷0.42ARated Power: 10WRipple & noise (max.): 150mVp-pVoltage tolerance: +/-2.0%Line regulation: +/-1.0%Load regulation: +/-2.0%Setup & rise time: 500ms & 30ms/230VAC at fullload, 1000ms & 30ms/115VAC at full loadHold up time (typ.): 120ms/230VAC at full load,25ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 84%AC current (typ.): 0.33A/115VAC, 0.21A/230VACInrush current (typ.): 35A/115VAC cold start,70A/230VAC cold startLeakage current: <1mA/240VAC

ProtectionOverload: above 105% rated output power,protection type - Hiccup mode - recoversautomatically after fault condition is removedOvervoltage: 27.6÷32.4V, protection type - shutdown o/p voltage & re-power on to recover

FunctionDC OK active signal: 18÷27V/20mA

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, TUV EN60950-1, NECclass 2 / LPSWithstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-1, EN61204-3,light industry level criteria A

OthersMTBF: min. 584000h MIL-HDBK-217F (25°C)Dimension (W x H x D): 22.5mm x 90mm x 100mmWeight: 0.17kg

#08222Net Price:8,10 EURUnit: pcs

Power supply 20W 12VDC, mini,(MPL-20-12)&middot; Free-convection-cooled&middot; Universal AC input voltage range&middot; Security &middot; Short circuit, overload,temperature&middot; Dedicated to LED applications&middot; High efficiency&middot; Tested at 100% load&middot; Resistant to lightning&middot; Total dust-and waterproof&middot; RoHS ComplianceOutputDC Voltage: 12VRated current: 1.67ACurrent Range: 0÷1.67ARated Power: 20WRipple & noise (max.): 150mVp-pVoltage tolerance: +/-4.0%Setup & rise time: 100ms /230VAC Hold up time (typ.): 80ms/230VAC

InputVoltage range: 90÷250VAC,Frequency range: 47÷60HzEfficiency (typ.): 80%AC current (typ.): 0.3A/115VAC, 0.25A/230VAC

ProtectionOverload: above 145-160% rated output powerShort: automatic return to normal operation after theresolution of interferenceTemperature: cutting off the output voltage

EnvironmentWorking temperature: -00°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 80°CStorage Humidity: 10÷90% RH

OthersDimension: 160mm x 30mm x 20mmWeight: 0.2kgILLUMINATED LETTERS LED indoors and outdoors

#06675Net Price:

21,50 EURUnit: pcs

Power supply 24W 24VDC, mini, DIN TS35 (MeanWell MDR-20-24)OutputDC Voltage: 24VRated current: 1ACurrent Range: 0÷1ARated Power: 24WRipple & noise (max.): 150mVp-pVoltage adjustment range: 21.6÷26.4VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 500ms & 30ms/230VAC at fullload, 1000ms & 30ms/115VAC at full loadHold up time (typ.): 50ms/230VAC at full load,20ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 84%AC current (typ.): 0.55A/115VAC, 0.35A/230VACInrush current (typ.): 20A/115VAC cold start,40A/230VAC cold startLeakage current: <1mA/240VAC

ProtectionOverload: 105%÷160% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 27.6÷32.4V, protection type - shutdown o/p voltage & re-power on to recover

FunctionDC OK active signal: 18÷27V/20mA

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, TUV EN60950-1, NECclass 2 / LPSWithstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-1, EN61204-3,light industry level criteria A

OthersMTBF: min. 236900h MIL-HDBK-217F (25°C)Dimension (W x H x D): 22.5mm x 90mm x 100mmWeight: 0.19kg

30/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 31: Communication for Industry

Communication for industry

#06676Net Price:

28,30 EURUnit: pcs

Power supply 40W 24VDC, mini, DIN TS35 (MeanWell MDR-40-24)OutputDC Voltage: 24VRated current: 1.7ACurrent Range: 0÷1.7ARated Power: 40.8WRipple & noise (max.): 150mVp-pVoltage adjustment range: 24÷30VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 500ms & 30ms/230VAC at fullload, 500ms & 30ms/115VAC at full loadHold up time (typ.): 50ms/230VAC at full load,20ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 88%AC current (typ.): 1.1A/115VAC, 0.7A/230VACInrush current (typ.): 30A/115VAC cold start,60A/230VAC cold startLeakage current: <1mA/240VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 31.2÷36V, protection type - shut downo/p voltage & re-power on to recover

FunctionDC OK signal relay contact rating (max.): 30V/1Aresistive

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUVEN60950-1, NEC class 2 / LPSWithstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC 25°C70%RH, I/P-FG 100MΩ/500VDC 25°C 70%RH,O/P-FG 100MΩ/500VDC 25°C 70%RHEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 301700h MIL-HDBK-217F (25°C)Dimension (W x H x D): 40mm x 90mm x 100mmWeight: 0.3kg

#06677Net Price:

30,20 EURUnit: pcs

Power supply 60W 24VDC, mini, DIN TS35 (MeanWell MDR-60-24)OutputDC Voltage: 24VRated current: 2.5ACurrent Range: 0÷2.5ARated Power: 60WRipple & noise (max.): 150mVp-pVoltage adjustment range: 24÷30VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 500ms & 30ms/230VAC at fullload, 500ms & 30ms/115VAC at full loadHold up time (typ.): 50ms/230VAC at full load,20ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 88%AC current (typ.): 1.8A/115VAC, 1A/230VACInrush current (typ.): 30A/115VAC cold start,60A/230VAC cold startLeakage current: <1mA/240VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 31.2÷36V, protection type - shut downo/p voltage & re-power on to recover

FunctionDC OK signal relay contact rating (max.): 30V/1Aresistive

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUVEN60950-1, NEC class 2 / LPSWithstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC 25°C70%RH, I/P-FG 100MΩ/500VDC 25°C 70%RH,O/P-FG 100MΩ/500VDC 25°C 70%RHEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 299200h MIL-HDBK-217F (25°C)Dimension (W x H x D): 40mm x 90mm x 100mmWeight: 0.33kg

#06678Net Price:

53,20 EURUnit: pcs

Power supply 96W 24VDC, mini, DIN TS35 (MeanWell MDR-100-24)OutputDC Voltage: 24VRated current: 4ACurrent Range: 0÷4ARated Power: 96WRipple & noise (max.): 150mVp-pVoltage adjustment range: 24÷30VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 3000ms & 50ms/230VAC at fullload, 3000ms & 50ms/115VAC at full loadHold up time (typ.): 50ms/230VAC at full load,20ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 86%AC current (typ.): 1.3A/115VAC, 0.8A/230VACInrush current (typ.): 30A/115VAC cold start,60A/230VAC cold startLeakage current: <1mA/240VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 31.2÷36V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 90°C +/-10°C (RTH2) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

FunctionDC OK signal relay contact rating (max.): 30V/1Aresistive

EnvironmentWorking temperature: -10°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUVEN60950-1, NEC class 2Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC 25°C70%RH, I/P-FG 100MΩ/500VDC 25°C 70%RH,O/P-FG 100MΩ/500VDC 25°C 70%RHEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 346000h MIL-HDBK-217F (25°C)Dimension (W x H x D): 55mm x 90mm x 100mmWeight: 0.42kg

31/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 32: Communication for Industry

Communication for industry

#08170Net Price:

18,20 EURUnit: pcs

Power supply 15W 12VDC, DIN TS35 (Mean WellDR-15-12)OutputDC Voltage: 12VRated current: 1.25ACurrent Range: 0÷1.25ARated Power: 15WRipple & noise (max.): 120mVp-pVoltage adjustment range: 10,8÷13,2VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 1000ms & 50ms/230VAC at fullload, 1000ms & 50ms/115VAC at full loadHold up time (typ.): 100ms/230VAC at full load,21ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 84%AC current (typ.): 0.88A/115VAC, 0.48A/230VACInrush current (typ.): 35A/115VAC cold start,65A/230VAC cold start

ProtectionOverload: 105%÷160% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 13,8÷16,2V, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL60950-1, TUV EN60950-1,design refer to EN50178Withstand voltage: I/P-O/P 3kVACIsolation resistance: I/P-O/P 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 1172,3K h MIL-HDBK-217F (25°C)Dimension (W x H x D): 25mm x 93mm x 56mmWeight: 0.1kg

#06679Net Price:

20,70 EURUnit: pcs

Power supply 36W 24VDC, DIN TS35 (Mean WellDR-30-24)OutputDC Voltage: 24VRated current: 1.5ACurrent Range: 0÷1.5ARated Power: 36WRipple & noise (max.): 150mVp-pVoltage adjustment range: 21.6÷26.4VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 100ms & 30ms/230VAC at fullload, 100ms & 30ms/115VAC at full loadHold up time (typ.): 100ms/230VAC at full load,21ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 83%AC current (typ.): 0.88A/115VAC, 0.48A/230VACInrush current (typ.): 15A/115VAC cold start,30A/230VAC cold start

ProtectionOverload: 105%÷160% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 27.6÷32.4V, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL60950-1, TUV EN60950-1,design refer to EN50178Withstand voltage: I/P-O/P 3kVACIsolation resistance: I/P-O/P 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 441500h MIL-HDBK-217F (25°C)Dimension (W x H x D): 78mm x 93mm x 56mmWeight: 0.27kg

#06680Net Price:

22,90 EURUnit: pcs

Power supply 48W 24VDC, DIN TS35 (Mean WellDR-45-24)OutputDC Voltage: 24VRated current: 2ACurrent Range: 0÷2ARated Power: 48WRipple & noise (max.): 480mVp-pVoltage adjustment range: 22.6÷26.4VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 800ms & 60ms/230VAC at fullloadHold up time (typ.): 100ms/230VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 80%AC current (typ.): 1.5A/115VAC, 0.75A/230VACInrush current (typ.): 28A/115VAC cold start,56A/230VAC cold startLeakage current: <1mA/240VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 27.6÷32.4V, protection type - shutdown o/p voltage & re-power on to recoverOver temperature: 135°C (U1) detect on heatsink ofpower transistor, protection type - shut down o/pvoltage & re-power on to recover

EnvironmentWorking temperature: -10°C ÷ 50°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -20°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, TUV EN60950-1Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2 (EN50082-2),heavy industry level criteria A

OthersMTBF: min. 364600h MIL-HDBK-217F (25°C)Dimension (W x H x D): 78mm x 67mm x 93mmWeight: 0.31kg

32/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 33: Communication for Industry

Communication for industry

#06681Net Price:

28,30 EURUnit: pcs

Power supply 60W 24VDC, DIN TS35 (Mean WellDR-60-24)OutputDC Voltage: 24VRated current: 2.5ACurrent Range: 0÷2.5ARated Power: 60WRipple & noise (max.): 150mVp-pVoltage adjustment range: 21.6÷26.4VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 100ms & 30ms/230VAC at fullload, 200ms & 30ms/115VAC at full loadHold up time (typ.): 100ms/230VAC at full load,23ms/115VAC at full load

InputVoltage range: 88÷264VAC, 124÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 84%AC current (typ.): 1.2A/115VAC, 0.8A/230VACInrush current (typ.): 18A/115VAC cold start,36A/230VAC cold start

ProtectionOverload: 105%÷160% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 27.6÷32.4V, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL60950-1, TUV EN60950-1,design refer to EN50178Withstand voltage: I/P-O/P 3kVACIsolation resistance: I/P-O/P 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 216200h MIL-HDBK-217F (25°C)Dimension (W x H x D): 78mm x 93mm x 56mmWeight: 0.3kg

#06682Net Price:

35,10 EURUnit: pcs

Power supply 76W 24VDC, DIN TS35 (Mean WellDR-75-24)OutputDC Voltage: 24VRated current: 3.2ACurrent Range: 0÷3.2ARated Power: 76.8WRipple & noise (max.): 150mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-1.0%Setup & rise time: 1000ms & 60ms/230VAC at fullload, 1800ms & 60ms/115VAC at full loadHold up time (typ.): 60ms/230VAC at full load,12ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 80%AC current (typ.): 1.6A/115VAC, 0.96A/230VACInrush current (typ.): 20A/115VAC cold start,40A/230VAC cold startLeakage current:

#08187Net Price:

41,70 EURUnit: pcs

Power supply 100W 12VDC, DIN TS35 (Mean WellDR-100-12)OutputDC Voltage: 12VRated current: 7.5ACurrent Range: 0÷7.5ARated Power: 90WRipple & noise (max.): 120mVp-pVoltage adjustment range: 12÷15VVoltage tolerance: +/-2.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 2700ms & 80ms/230VAC at fullload, 2700ms & 80ms/115VAC at full loadHold up time (typ.): 50ms/230VAC at full load,18ms/115VAC at full load

InputVoltage range: 88÷264VAC, 124÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 87%AC current (typ.): 3A/115VAC, 1.6A/230VACInrush current (typ.): 30A/115VAC cold start,45A/230VAC cold start

ProtectionOverload: 105%÷135% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 16÷20V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 90°C +/-15°C (RTH2) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL60950-1, TUV EN60950-1,design refer to EN50178Withstand voltage: I/P-O/P 3kVACIsolation resistance: I/P-O/P >100MΩ/500VDC 25°C70%RHEMC emission: Compliance to EN61204-3, EN55022Class B, EN61000-3-2,-3EMC conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BEMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 486000h MIL-HDBK-217F (25°C)Dimension (W x H x D): 100mm x 93mm x 56mmWeight: 0.35kg

33/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 34: Communication for Industry

Communication for industry

#06683Net Price:

41,70 EURUnit: pcs

Power supply 100W 24VDC, DIN TS35 (Mean WellDR-100-24)OutputDC Voltage: 24VRated current: 4.2ACurrent Range: 0÷4.2ARated Power: 100.8WRipple & noise (max.): 150mVp-pVoltage adjustment range: 24÷29VVoltage tolerance: +/-1.0%Line regulation: +/-1.0%Load regulation: +/-1.0%Setup & rise time: 2700ms & 80ms/230VAC at fullload, 2700ms & 80ms/115VAC at full loadHold up time (typ.): 50ms/230VAC at full load,18ms/115VAC at full load

InputVoltage range: 88÷264VAC, 124÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 89%AC current (typ.): 3A/115VAC, 1.6A/230VACInrush current (typ.): 30A/115VAC cold start,45A/230VAC cold startLeakage current: <1mA/240VAC

ProtectionOverload: 105%÷135% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 30÷35V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 90°C +/-15°C (RTH2) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, TUV EN60950-1, designrefer to EN50178Withstand voltage: I/P-O/P 3kVACIsolation resistance: I/P-O/P >100MΩ/500VDC 25°C70%RHEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level criteria A

OthersMTBF: min. 486000h MIL-HDBK-217F (25°C)Dimension (W x H x D): 100mm x 93mm x 56mmWeight: 0.35kg

#06684Net Price:

43,90 EURUnit: pcs

Power supply 120W 24VDC, DIN TS35 (Mean WellDR-120-24)OutputDC Voltage: 24VRated current: 5ACurrent Range: 0÷5ARated Power: 120WRipple & noise (max.): 80mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-1.0%Setup & rise time: 500ms & 70ms/230VAC at fullload, 500ms & 70ms/115VAC at full loadHold up time (typ.): 36ms/230VAC at full load,32ms/115VAC at full load

InputVoltage range: 88÷132VAC / 176÷264VAC byswitch, 248÷370VDCFrequency range: 47÷63HzEfficiency (typ.): 84%AC current (typ.): 2.6A/115VAC, 1.6A/230VACInrush current (typ.): 20A/115VAC cold start,40A/230VAC cold startLeakage current: <3.5mA/240VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 29÷33V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 90°C +/-5°C (TSW1) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -10°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -20°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUVEN60950-1Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2 (EN50082-2),heavy industry level criteria A

OthersMTBF: min. 136800h MIL-HDBK-217F (25°C)Dimension (W x H x D): 65.5mm x 125.2mm x100mmWeight: 0.79kg

#06685Net Price:

74,40 EURUnit: pcs

Power supply 240W 24VDC, P.F.C., DIN TS35(Mean Well DRP-240-24)OutputDC Voltage: 24VRated current: 10ACurrent Range: 0÷10ARated Power: 240WRipple & noise (max.): 80mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-1.0%Setup & rise time: 800ms & 40ms/230VAC at fullload, 800ms & 40ms/115VAC at full loadHold up time (typ.): 24ms/230VAC at full load,24ms/115VAC at full load

InputVoltage range: 85÷264VAC, 120÷370VDCFrequency range: 47÷63HzPower factor (typ.): 0.96/230VAC at full load,0.99/115VAC at full loadEfficiency (typ.): 84%AC current (typ.): 2.8A/115VAC, 1.4A/230VACInrush current (typ.): 27A/115VAC cold start,45A/230VAC cold startLeakage current: <3.5mA/240VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 30÷36V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 100°C +/-5°C (TSW1) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -10°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -20°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUVEN60950-1Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN55024, EN61000-6-2 (EN50082-2),heavy industry level criteria A

OthersMTBF: min. 105500h MIL-HDBK-217F (25°C)Dimension (W x H x D): 125.5mm x 125.2mm x100mmWeight: 1.2kg

34/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 35: Communication for Industry

Communication for industry

#06686Net Price:

111,00 EURUnit: pcs

Power supply 480W 24VDC, P.F.C., DIN TS35(Mean Well DRP-480-24)OutputDC Voltage: 24VRated current: 20ACurrent Range: 0÷20ARated Power: 480WRipple & noise (max.): 120mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-1.0%Setup & rise time: 1200ms & 40ms/230VAC at fullloadHold up time (typ.): 16ms/230VAC at full load

InputVoltage range: 180÷264VAC, 250÷370VDCFrequency range: 47÷63HzPower factor (typ.): >=0.7Efficiency (typ.): 84%AC current (typ.): 4A/230VACInrush current (typ.): 40A/230VAC cold startLeakage current: <3.5mA/240VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 30÷36V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 100°C +/-5°C (TSW1) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -20°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUVEN60950-1Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN61000-6-2 (EN50082-2), heavyindustry level criteria A

OthersMTBF: min. 180900h MIL-HDBK-217F (25°C)Dimension (W x H x D): 227mm x 125.2mm x100mmWeight: 2.4kg

#06687Net Price:

61,00 EURUnit: pcs

Power supply 120W 24VDC, single phase, DINTS35 (Mean Well DRH-120-24)OutputDC Voltage: 24VRated current: 5ACurrent Range: 0÷5ARated Power: 120WRipple & noise (max.): 80mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-0.5%Setup & rise time: 1700ms & 120ms/400VAC at fullload, 1000ms & 120ms/500VAC at full loadHold up time (typ.): 16ms/400VAC at full load,30ms/500VAC at full load

InputVoltage range: 340÷550VAC, 480÷780VDCFrequency range: 47÷63HzEfficiency (typ.): 85%AC current (typ.): 0.65A/400VAC, 0.6A/500VACInrush current (typ.): 50A cold startLeakage current: <3.5mA/530VAC

ProtectionOverload: 105%÷160% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 30÷36V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 85°C +/-5°C (TSW) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL60950-1, IEC60950-1 CBapproved by SIQWithstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN61204-3, EN61000-6-2 (EN50082-2),heavy industry level criteria A

OthersMTBF: min. 178700h MIL-HDBK-217F (25°C)Dimension (W x H x D): 65.5mm x 125.2mm x100mmWeight: 0.75kg

#06688Net Price:

83,70 EURUnit: pcs

Power supply 240W 24VDC, three phase, DINTS35 (Mean Well DRT-240-24)OutputDC Voltage: 24VRated current: 10ACurrent Range: 0÷10ARated Power: 240WRipple & noise (max.): 80mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-0.5%Setup & rise time: 1200ms & 40ms/400VAC at fullload, 800ms & 40ms/500VAC at full loadHold up time (typ.): 20ms/400VAC at full load,40ms/500VAC at full load

InputVoltage range: Three-phase 340÷550VAC,480÷780VDCFrequency range: 47÷63HzEfficiency (typ.): 89%AC current (typ.): 0.95A/400VAC, 0.75A/500VACInrush current (typ.): 50A cold startLeakage current: <3.5mA/530VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 30÷36V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 100°C +/-5°C (TSW) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUV60950-1Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN61204-3, EN61000-6-2 (EN50082-2),heavy industry level criteria A

OthersMTBF: min. 114600h MIL-HDBK-217F (25°C)Dimension (W x H x D): 125.5mm x 125.2mm x100mmWeight: 1.3kg

35/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 36: Communication for Industry

Communication for industry

#06689Net Price:

119,00 EURUnit: pcs

Power supply 480W 24VDC, three phase, DINTS35 (Mean Well DRT-480-24)OutputDC Voltage: 24VRated current: 20ACurrent Range: 0÷20ARated Power: 480WRipple & noise (max.): 80mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-0.5%Setup & rise time: 1200ms & 40ms/400VAC at fullload, 800ms & 40ms/500VAC at full loadHold up time (typ.): 16ms/400VAC at full load,35ms/500VAC at full load

InputVoltage range: Three-phase 340÷550VAC,480÷780VDCFrequency range: 47÷63HzEfficiency (typ.): 89%AC current (typ.): 1.7A/400VAC, 1.3A/500VACInrush current (typ.): 50A cold startLeakage current: <3.5mA/530VAC

ProtectionOverload: 105%÷150% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 30÷36V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 110°C +/-5°C (TSW) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUV60950-1Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN61204-3, EN61000-6-2 (EN50082-2),heavy industry level criteria A

OthersMTBF: min. 91100h MIL-HDBK-217F (25°C)Dimension (W x H x D): 227mm x 125.2mm x100mmWeight: 2.5kg

#06690Net Price:

216,00 EURUnit: pcs

Power supply 960W 24VDC, three phase, DINTS35 (Mean Well DRT-960-24)OutputDC Voltage: 24VRated current: 40ACurrent Range: 0÷40ARated Power: 960WRipple & noise (max.): 80mVp-pVoltage adjustment range: 24÷28VVoltage tolerance: +/-1.0%Line regulation: +/-0.5%Load regulation: +/-0.5%Setup & rise time: 200ms & 60ms/400VAC at fullload, 200ms & 60ms/500VAC at full loadHold up time (typ.): 14ms/400VAC at full load,30ms/500VAC at full load

InputVoltage range: Three-phase 340÷550VAC,480÷780VDC, dual phase operation possible afterconnecting L1+L3+FGFrequency range: 47÷63HzEfficiency (typ.): 91%AC current (typ.): 2A/400VAC, 1.6A/500VACInrush current (typ.): 50A cold startLeakage current: <3.5mA/530VAC

ProtectionOverload: 105%÷125% rated output power,protection type - constant current limiting - recoversautomatically after fault condition is removedOvervoltage: 30÷36V, protection type - shut downo/p voltage & re-power on to recoverOver temperature: 110°C +/-5°C (TSW) detect onheatsink of power transistor, protection type - shutdown o/p voltage & re-power on to recover

EnvironmentWorking temperature: -20°C ÷ 60°CWorking humidity: 20÷90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10÷95% RHTemperature coefficient: +/-0.03%/°C (0÷50°C)Vibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCSafety standards: UL508, UL60950-1, TUV60950-1Withstand voltage: I/P-O/P 3kVAC, I/P-FG 1.5kVAC,O/P-FG 0.5kVACIsolation resistance: I/P-O/P 100MΩ/500VDC, I/P-FG100MΩ/500VDC, O/P-FG 100MΩ/500VDCEMI conduction & radiation: EN55011, EN55022(CISPR22), EN61204-3 Class BHarmonic current: EN61000-3-2, EN61000-3-3EMS immunity: EN61000-4-2/3/4/5/6/8/11,ENV50204, EN61204-3, EN61000-6-2 (EN50082-2),heavy industry level criteria A

OthersMTBF: min. 122500h MIL-HDBK-217F (25°C)Dimension (W x H x D): 276mm x 125.2mm x100mmWeight: 3.3kg

#06774Net Price:

43,20 EURUnit: pcs

Battery controller for DIN Rail UPS system,24VDC, 40A max, DIN TS35 (Mean WellDR-UPS40)Features :- battery controller for DIN Rail UPS system- parallel connection to DC BUS- suitable for 24V system up to 40A- installed on DIN Rail TS35 / 7.5 or 15- built-in battery test function- battery polarity protection- relay contact signal output and LED indicator forDC BUS OK- battery Fail, and Battery Discharge- cooling by free air convectionDC Input / DC BUSDC voltage (Typ.): 24÷29VRated current: 40ABattery input / OutputVoltage range (Typ.): 21÷29VCurrent range: 0÷40ACharge current (typ.): 2AExternal battery: 4/7/12Ah / 24V

FunctionRelay contact rating (max.): 30VDC 1ADC BUS OK - Relay contact: short when DC voltagebetween 21÷29V (3%), relay contactsDC BUS OK - LED (Green): DC BUS OK - light, DCBUS fail - darkBattery fail - Relay contact: short when battery failureis observed through the battery test function, relaycontactsBattery fail - LED (Red): battery over-dischargewarning or battery broken - light, battery OK - darkBattery discharge - Relay contact: short whenbattery in discharge condition, relay contactsBattery discharge - LED (Yellow): batterydischarging - light, battery is not discharging ordischarging current<2.0A - dark

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20% ÷ 90% RH non-condensingStorage temperature: -20°C ÷ 85°CStorage Humidity: 10% ÷ 95% RHVibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCWithstand voltage: Terminal-Chassis 0.5kVAC,Relay contacts-Terminal 0.5kVACIsolation resistance: Terminal-Chassis>100MΩ/500VDC 25°C 70% RHEMI conduction & radiation: EN55022 (CISPR22)Class BEMS immunity: EN61000-4-2/3/4/5/6/8, ENV50204,heavy industry level criteria A

OthersMTBF: min. 161900h MIL-HDBK-217F (25°C)Dimension (W x H x D): 55.5mm x 125.2mm x100mmWeight: 0.55kg

36/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 37: Communication for Industry

Communication for industry

#06775Net Price:

25,10 EURUnit: pcs

Power Supply Redundancy Module, 20A max,DIN TS35 (Mean Well DR-RDN20)Features :- suitable for redundant operation of 24V system- installed on DIN Rail TS35 / 7.5 or 15- relay contact signal output and LED indicator forinput failure alarm- cooling by free air convectionOutputReverse voltage (max.): 30VOutput current (max.): 20AVoltage drop: 0.5VLED indicators: two green LEDs indicating eachinput is "OK" or "fail"

InputInput voltage range: 21÷28VNumber of inputs: 2Input current: 20A per input

FunctionInput voltage alarm: when input is > 20V( 5%) or <30V( 5%) relay contactsRelay contact rating (max.): 30VDC 1A

EnvironmentWorking temperature: -20°C ÷ 70°CWorking humidity: 20% ÷ 90% RH non-condensingStorage temperature: -40°C ÷ 85°CStorage Humidity: 10% ÷ 95% RHVibration (component): 10÷500Hz, 2G10min./1cycle, 60min. each along X Y Z axesVibration (mounting): compliance to IEC60068-2-6

Safety & EMCWithstand voltage: Terminal-Chassis 0.5kVAC,Relay contacts-Terminal 0.5kVACIsolation resistance: Terminal-Chassis>100MΩ/500VDC 25°C 70% RHEMI conduction & radiation: EN55022 (CISPR22)Class BEMS immunity: EN61000-4-2/3/4/5/6/8, ENV50204,heavy industry level criteria A

OthersMTBF: min. 996800h MIL-HDBK-217F (25°C)Dimension (W x H x D): 55.5mm x 125.2mm x100mmWeight: 0.5kg

37/38 http://www.atel-electronics.eu 2012.06.15 17:12

Page 38: Communication for Industry

Index

Switches ........................................................................................................................................................................................................................ 1

Wireless communication ............................................................................................................................................................................................. 17

Media converters ........................................................................................................................................................................................................ 19

Serial device servers ................................................................................................................................................................................................... 24

Transceivers ............................................................................................................................................................................................................... 28

Power supplies ............................................................................................................................................................................................................ 30

38/38 http://www.atel-electronics.eu 2012.06.15 17:12


Recommended