13
(858) 536-5050 | www.focalspot.com Verifier Component Inspection Series for Component Authentication
(858) 536-5050 | www.focalspot.com
Verifier Component Inspection Series for
Component Authentication
(858) 536-5050 | www.focalspot.com
Component Inspection SeriesAdvanced System
3
Overview
Dual Monitors
X-Ray Monitor. Shows Stored Golden Part X-Ray Image and Live X-ray Image for Comparison inspection.
Reel to Reel Holders and Drive Motors (Forward, Backward, with Speed Control)
Automatic Matching Software
Camera Monitor. Shows Stored Optical Image of Golden Part and Live Optical Inspection.
Overview. Advanced CIS
High Resolution X-Ray Tube:75kV 45 micron, 90kV 5 micron, or 130kV 5 micron
High Resolution Dual 2”/4” Image Intensifier and Direct Couple CCD Camera with Zoom Lens
Variable Magnification Image Train Spine allows both high magnification and large field of view
Material Handling SystemsTape and ReelBelt Conveyor for TubesXY Table for Jedec Trays or Individual PartsStandard Individual Component or PCB Inspection at Higher Magnifications.
Portable Cabinet Style. Lots of Access Dual Monitor Inspection – X-Ray & Optical
Live X-ray Image and Compare with Stored Golden PartLive Optical Image and Compare with Stored Golden Part.4
Handles Tape & Reel.
Design allows for plug and play1. Tape and Reel System. Handles: 7, 13, and 21” inch reels.
Accommodates Tape sizes from 8mm to 44 mm with adjustable pitch positioning. Variable speed control. The Indexer will allow for Automated Insepction of Parts in Tape and Reel.
5
Handles Tape and Reel and Tubes.
Design allows for plug and play of two unique handlers:1. Component Tube Inspection via Belt Conveyor.
Variable width and locking. Variable speed control.
6
Handles Tubes.
Design allows for plug and play of two unique handlers:1. Component Tube Inspection via Belt Conveyor.
Variable width and locking. Variable speed control.
7
Automatic Matching Software
Matching Software Scores Reference Image Regions of Interest to Live Image to Detect Counterfeit Parts
8
(858) 536-5050 | www.focalspot.com
Component Inspection SeriesStandard System
10
Overview – Standard CIS
Single Monitor• Dual Monitors Optional
X-Ray Monitor. Shows Stored Golden Part X-Ray Image and Live X-ray Image for Comparison inspection.
Reel to Reel Holders and Drive Motors (Forward, Backward, with Speed Control)
Belt Conveyor for Tape & Reel and Tubes.
XY Table for Jedec Trays or PCB Inspection.
Automatic Matching Software
Optional Dual View Inspection. • Camera Monitor. Shows Stored Optical Image of Golden Part and Live Optical Inspection.
• Exceeds Radiation Safety Standards CDRH 1020.40
Overview. Standard CIS
High Resolution X-Ray Tube:75kV 45 micron, 90kV 5 micron, or 130kV 5 micron
High Resolution Dual 2”/4” Image Intensifier and Direct Couple CCD Camera with Zoom Lens
Fixed Geometric Magnification. Material Handling Systems
Tape and ReelBelt Conveyor for TubesXY Table for Jedec Trays or Individual PartsStandard Individual Component or PCB Inspection at Higher Magnifications.
Portable Cabinet Style. Lots of Access Optional Dual Monitor Inspection – X-Ray & Optical
Live X-ray Image and Compare with Stored Golden PartLive Optical Image and Compare with Stored Golden Part.
11
Handles Tape and Reel and Tubes.
Design allows for plug and play of the material handler:1. Belt Conveyor for Tape and Reel and Tubes.
Variable width and locking. Variable speed control. Optional: Tape and Reel Indexer. (For Automated Inspection)
12
Handles JEDEC Trays and Individual Parts
Standard XY table handles provides 16.5 in x 16.5 in inspectable area for JEDEC Trays.
13
