1-11-17 Gorilla Machinery P.O. Box 2579 Springfield OH 45505 Compaction Table Manufacturer -GK Code: GOR300 Price $55,000 Certified Rating Has been cleaned and painted New controls with VFDs Smart relay with timers 4-force output settings Can be configured to operate at any capacity as low as 1,000 lbs. up to 40,000 lbs. 9'6'' Wide x 8'8'' Long x 52" Tall Model Number: HDCT120-10 Serial Number: C8298-1 Capacity: 40,000 lbs. Manuals: None Time to Ship: 1-2 weeks click to see more
Transcript
1-11-17
Gorilla Machinery P.O. Box 2579 Springfield OH 45505
Vertical Elevator Manufacturer - Olds Code: GOR319 Price: Contact us for more information [email protected] Certified Rating
6" Diameter Casing 12' Discharge Height Approximately 3 ft.2 footprint Two thrust bearings with standard seals Carbon steel screw and intake scoops Quiet with few moving parts
Capacity: Up to 15 TPH Voltage: 480 V/3 phase Time to Ship: 1-2 weeks
Tilting shelves lift up and out of the way for ergonomic loading and unloading Eliminates typical "dead" areas of rack as all shelves are easily accessible Fingertip force required to lift shelves Reinforced base is designed for fork truck handling Adjustable shelf height ideal for varying core production in today's typical jobbing foundry Large casters for ease of movement Locking bar prevents accidental dropping of shelves
Web Link: http://www.palmerusedequipment.com/miscellaneous_foundry_equipment/GMT0003.htm
Web Link: http://www.palmermfg.com/bulk_storage_handling/core_rack.htm
Air operated, infinitely variable, double diaphragm pump Complete air filter / lubricator / flow control system 1-HP air motor for material agitation Stainless steel propellers and shaft Easily portable, heavy-duty, two-wheel cart with hose "Quick-Flush" cleaning system Adjustable volume spray gun
Web Link: http://www.palmerusedequipment.com/mold_core_coating/GMMCC0001.htm
Web Link: http://www.palmermfg.com/mold_core_coating/kp-5_spray_system.htm
For cores and molds from 5-200 lbs. Rugged - Heavy-duty construction High frequency vertical vibration Adjustable duration timer - .1 to 10 seconds Adjustable force "Hands free” actuation Precision-ground top plate Can also be used to remove hard-to-draw cores
Web Link: http://www.palmerusedequipment.com/core_room_equipment/GMCPT0001.htm
Web Link: http://www.palmermfg.com/compaction_tables/core_table_v-200.htm
Ideal for small cores and molds. Great for plaques and high tolerance cores. We have two new units available.
6 inch Diameter Casing 12 foot Discharge height 480 Volt, 3 Phase Motor Approximately 3’ Square Footprint Up to 15 TPH of sand Two Thrust Bearings with Standard Seals Carbon Steel Screw and Intake Scoops Quiet • Few Moving Parts Ships 1-2 weeks
Web Link: http://www.palmerusedequipment.com/sand_reclaimation_equipment/SRE0010.htm
Web Link: http://www.palmermfg.com/bulk_storage_handling/vertical_sand_conveyors.htm
Used only for trials, this small, easy-to-operate aluminum degasser is ideal for small foundries or foundries with many crucible type furnaces that need service. This unit is easily picked up by hand or by hoist. Can effectively cut degas times from 1/2 hour to minutes. Unique lance design greatly reduces replacement cost.
Web Link: http://www.palmerusedequipment.com/melting_room_equipment/MRE0004.htm
Web Link: http://www.palmermfg.com/melt_shop/portable_alum_degasser.htm
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
Web Link: http://www.palmerusedequipment.com/miscellaneous_foundry_equipment/GMMFT0011.htm
Web Link: http://www.palmermfg.com/no-bake_molding/transfer_cars.htm
Capacity: 5 ft.3
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases.
Features: 12 RPM (17 RPM and 22 RPM optional) 3-year unlimited cycle warranty Spring loaded gate AC drive for all motors except conveyors Quick disconnects throughout Recent Improvements: Standard wrap height - Increased to 80" Optional wrap height is now available in 92", 104" and 116" Ergonomically friendly film loading carriage is mounted on the side and allows for easy loading Lifetime warranty on pre-stretch rollers' blue compound "Analog" sensor is standard Optional close roller spacing (3" centers) on conveyors is rated at 4000 lbs. Controls ready for the integration of fence kit Standardization of line with the smart tower and carriage inventory Improved design with enclosed carriage chains
Web Link:http://www.palmerusedequipment.com/miscellaneous_foundry_equipment/GMMCH0001.htm
Model Number: WCA-200
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
Complete with pumps and controls For either 2 part furan acid or PUNB 3 part Will accept any size Palmer mixing chamber up to 3,000 lbs./min. Come with either 500 or 1,000 lbs./min. mixing chamber Power feeder not included - Available at extra cost Assembled and Operating for Small fee
Web Link: http://www.palmerusedequipment.com/mixers_pumping_systems/GMCSM0017.htm
Web Link: http://www.palmermfg.com/mixers/sandmixer_m500xld.htm
Model Number: M500 Capacity 500 or 1,000 lbs./min. Voltage: 240/480 V/3 phase/60 Hz Manuals: Yes Time to Ship: 3-4 weeks
M500 Articulated High Speed Sand Mixer - Continued
ITEM: GMCSM0017
Articulated High Speed Sand Mixer
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
M50XLD High Speed Continuous Mixer
Serial # M1648XL
ITEM: PMS317
PRICE: $13,820
Certified Rating
4 Resin and Catalyst Output Levels Calibration Timer with Remote Start/Stop Buttons & Selector Switches Recirculating Pumps Dual Sand Slidegates Remote Pumps Third Part Pump Reworked and In Running Condition
Web Link: http://www.palmerusedequipment.com/mixers_pumping_systems/PMS317.htm
Web Link: http://www.palmermfg.com/mixers/sandmixer_m50xld.htm
Web Link: http://www.palmerusedequipment.com/sand_heaters_coolers/TPC0005.htm
Web Link: http://www.palmermfg.com/sand_conditioning/section_electric_sand_heaters.htm
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases.
2-Part Resin System Can be Converted – 3-Part System Available Under Motor Swivel 200-600 Pounds Per Minute
Web Link: http://www.palmerusedequipment.com/mixers_pumping_systems/PMS307.htm
Web Link: http://www.palmermfg.com/mixers/sandmixer_m300xld.htm
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases.
Air Operated, Infinitely Variable, Double Diaphragm pump
1 Hp air motor for material agitation
Stainless steel propellers and shaft
Adjustable volume spray gun
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used M50XLD High Speed Continuous Mixer (S/N
M1642XLD)
ITEM: PMS324
PRICE: $ 19,000
Complete with pumps and controls 2 Part Pump System 480Volt/3Ph/60Hz 4 Resin and Catalyst Output levels Calibration Timer with Remote Start/Stop Buttons & Selector Switches Recirculating Pumps Dual Sand Blend Split Hopper Hopper Support Stand In Running Condition
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used Bucket Elevator
Item: PMS327
Price: $13,600
16 TPH
480V/3Ph/60Hz
20’ Discharge Height
High Temp – Maximum Temperature 300°
Serial # CF572
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used Magnetic Separator
Item: PMS329
Price: $15,000
Up to 20 TPH Sand at 100 PCF
11 Guage 304 Stainless Steel Construction, 22” x 18” x 27-1/8” Tall Flange to Flange
Heavy Duty Predrilled 2” x 2” x 1/4" Carbon Steel Angle Flanges
Samarium Cobalt Permanent Magnet Material
Rotating Drum is 12” Diameter x 12” Wide
Adjustable Feed Gate for Product Flow
Inlet has fixed diverter to direct product flow over magnet area
Outlet has splitter for ferrous and non-ferrous product discharge
230/460 Volt/3 Phase, 1/2 Hp motor and reducer for 45 RPM continuous operation
Position of magnet adjustable for optimum separation
Continuous Cleaning Discharges Ferrous Contaminants Separate from Product
Maximum Operating Temperature 572°F (300°C)
Low Hours
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used RP-2 Flowboss Resin Monitoring with PID
(S/N PS2409)
Item: PMS332
Price: $25,000
Recirculating I, II, and III
Four Recipes
By-Pass around Flow Meter
Filter System with 100 Mesh Filter Baskets (Parts I, II Temperature Monitoring)
Additional Filter Housing and Basket for Part I
Replace Part III Filter with 37 Micron Screen
Part I Resin Heater
Flow Switch Heater
In Running Condition
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
MK1000XLD-2 Kit Mixer, and P-12 Powder Feeder
with 10 Cubic Foot Hopper–Palmer
Item: PMS333
Price: $25,000
Standard 30 Hp Motor
1000 Pounds Per Minute Mixing Capacity
Dual Resin Levels
Standard Voltage 480V/3 Ph/60 Hz
No Base Included
Remote Electrical and Pumping System Enclosures
In Running Condition
1-11-17
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used Pneumatic Sand Transporter (S/N PSL136)
Item: PMS325
Price: $9,000
20 Degrees to 400 Degrees Operating Range
10 Ton Per Hour
In Running Condition
No Controls –Controls can be built by Palmer but are not included
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
CMCB50 Coremaker with M100XLD High Speed
Continuous Mixer
Item: PMS334
Price: $75,000
Certified Rating
Dual Sand Slidegates
Cold Box Adder
Third Part Prewire
Calibration Timer
P-5 Powder Feeder
Scrubber
Elevator and Hopper
1-11-17
1-11-17
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
