www.lovittech.com.au Head Office 207 Para Road, Montmorency VIC 3094 Ph: +61 3 9431 7300 Marketing Level 7, 91 Phillip Street, Parramatta NSW 2150 Ph: +61 2 9891 0066 Email: [email protected]Lovitt Technologies Australia is synonymous with precision engineering in the Australian aerospace sector. We are a specialist manufacturer certified to the industry-specific AS9100:2004 standard. Having established a strong reputation as a local manufacturer, Lovitt Technologies Australia was introduced to international markets through the government’s Australian Industry Involvement programme (AII). Now, our standing in the aerospace industry is such that we can negotiate directly with prime contractors and original equipment manufacturers (OEMs) against international competition. The commitment we have made to aerospace manufacturing is extensive: Adherence to quality standard AS9100:2004 provides the ultimate assurance of raw material traceability, design conformance and reliability. Capital investment in the latest high-speed machining centres (20,000 rpm x 10 m/min) including 5-axis mills and 7-axis lathes. Optimal configuration of machining equipment to suit the light-weight materials typically used in aircraft componentry such as aluminium and titanium. Flexibility in the design of production facilities to suit the diverse volume requirements, from prototyping to full-scale production. Value-added services to offer our customer more than just precision engineering, but a solution that takes the machined item to the highest level of finished component or sub-assembly. In-house project managers co-ordinate the provision of these services via our network of certified suppliers. Lovitt Technologies Australia has extensive experience in both commercial and military aircraft projects and is a recognised supplier to the leading aerospace companies in the world. 355.59° Demonstrating ultimate commitment to the aerospace customer ����������������������������� 349.52° 166.192° 204.586° 321.321° 90° 35.12° 132.27° PICTURES: Airbus S.A.S. / The Boeing Company Progressive Precision Engineering
Transcript
www.lovittech.com.au
Head Office207 Para Road, Montmorency VIC 3094 Ph: +61 3 9431 7300
Lovitt Technologies Australia is synonymous with precision engineering in the Australian aerospace sector. We are a specialist manufacturer certified to the industry-specific AS9100:2004 standard.
Having established a strong reputation as a local manufacturer, Lovitt Technologies Australia was introduced to international markets through the government’s Australian Industry Involvement programme (AII). Now, our standing in the aerospace industry is such that we can negotiate directly with prime contractors and original equipment manufacturers (OEMs) against international competition.
The commitment we have made to aerospace manufacturing is extensive:
Adherence to quality standard AS9100:2004 provides the ultimate assurance of raw material traceability, design conformance and reliability.
Capital investment in the latest high-speed machining centres (20,000 rpm x 10 m/min) including 5-axis mills and 7-axis lathes.
Optimal configuration of machining equipment to suit the light-weight materials typically used in aircraft componentry such as aluminium and titanium.
Flexibility in the design of production facilities to suit the diverse volume requirements, from prototyping to full-scale production.
Value-added services to offer our customer more than just precision engineering, but a solution that takes the machined item to the highest level of finished component or sub-assembly. In-house project managers co-ordinate the provision of these services via our network of certified suppliers.
Lovitt Technologies Australia has extensive experience in both commercial and military aircraft projects and is a recognised supplier to the leading aerospace companies in the world.
355.59°
Demonstrating ultimate commitment to the
aerospace customer
�����������������������������
�����������������������������
349.52°
166.192°
204.
586°
321.321°
90°
35.1
2°
132.27°
PICTURES: Airbus S.A.S. / The Boeing Company
Prog
ress
ive
Prec
isio
n En
gine
erin
g
www.lovittech.com.au
Head Office207 Para Road, Montmorency VIC 3094 Ph: +61 3 9431 7300
Lovitt Technologies Australia is a recognised and trusted supplier of machined components to the materiels industry which supports the Australian Defence Forces.
Lovitt Technologies Australia is very proud to have been involved with projects that have served each branch of the armed forces.
ArmyWe have particular expertise in the machining of ruggedised communications enclosures, from solid or casting, treated with surface finishes to military specification. Projects: RAVEN, Parakeet, Personal Locator Beacon (case study available).
Air forceOur extensive experience in the commercial aerospace sector made Lovitt Technologies Australia a sound choice in providing machined components, kits-of-parts, and sub-assemblies. Projects: F-111, F/A-18, Orion P-3C, Armed Reconnaissance Helicopter, Wedgetail AEW&C (case study available).
SeaWe have contributed a range of machined items, from the assemblies associated with weapons handling systems through to mechanical aspects of SONAR equipment. Projects: NULKA, Evolved SEASPARROW Missile (ESSM), Collins Class Submarine, ANZAC Class frigates, HUON Class Minehunter, Force Guided Missile Frigates Upgrade (FFG UP).
Lovitt Technologies Australia has a strong network of relationships with suppliers who are highly regarded in their respective fields. We can partner with leading firms in electrical cabling, surface finishing, and specialised testing to complement our strength in precision engineering.
Every project is managed from order through to timely delivery so that ultimately the customer is in receipt of finished parts which can be integrated into their production processes with minimal interruption.
355.59°
Trusted by international
defence forces to deliver accuracy, durability and reliability
�����������������������������
�����������������������������
349.52°
166.192°
204.
586°
321.321°
90°
35.1
2°
132.27°
PICTURES: Department of Defence / Lockheed Martin
Prog
ress
ive
Prec
isio
n En
gine
erin
g
www.lovittech.com.au
Head Office207 Para Road, Montmorency VIC 3094 Ph: +61 3 9431 7300
Lovitt Technologies Australia is a highly sought producer of components for the communications industries, specialising in electronics enclosures for commercial or military applications.
MachiningFrom Solid: Utilising Lovitt Technologies Australia’s state-of-the-art high speed CNC machining capabilities, we can provide enclosures precision machined from solid or extrusions.
From Castings: Lovitt Technologies Australia has strong relationships with local and overseas casting houses. We source the optimum casting technology – from thin walled investment casting, die casting or sand casting – to suit the product’s design specification and end use.
FinishingCommunications components may require RF shielding, standard or specialised plating, surface coatings, painting or etching to address environmental and conductivity requirements. We offer these services through our network of supplier / sub-contractor relationships.
Sub-AssemblyTo offer customers components which are finished to the highest level, our services go beyond the core capabilities of many machining houses. We provide the highest level of mechanical and electrical sub-assembly to deliver components that can be integrated into production lines with minimal handling.
Lovitt Technologies Australia can draw on an extensive history of military and commercial precision machining to assist you with your communications projects. We have demonstrated capabilities in manufacturing the following components:
heatsinks antenna / aerial components satellite components radar components radio components & equipment, and cable adaptors and components.
355.59°
Machining, finishing and assembling a complete
communications solution
�����������������������������
�����������������������������
349.52°
166.192°
204.
586°
321.321°
90°
35.1
2°
132.27°
PICTURE: Department of Defence
Prog
ress
ive
Prec
isio
n En
gine
erin
g
www.lovittech.com.au
Head Office207 Para Road, Montmorency VIC 3094 Ph: +61 3 9431 7300
Many customers are looking for more than machined parts from their precision engineering service providers.
Today, markets demand a streamlined supply chain. There must be fewer suppliers, who take on more responsibility and solve a greater number of problems. They must be prepared to take on projects, manage them to completion, and deliver. Suppliers must be more than just service providers, they must be solutions providers.
Firstly, we offer unparalleled flexibility in sourcing and machining a wide range of raw materials, meeting your prototype or production volume requirements, and offering innovative supply arrangements. We complement this with in-house mechanical assembly facilities.
Secondly, we provide complete solutions which marry our expertise in precision machining with the offerings of industry leaders in the allied areas of:
castings, forgings and fabrications mechanical and electrical assembly surface treatment (e.g. plating, painting, alodining,
anodizing, water-proofing), and heat treatment and specialised testing.
Should your project require technical services of a different nature, we welcome your approach and the opportunity to form a new relationship with a supplier of choice.
The relationships we have established with both local and offshore suppliers allow us to extend our services to a global audience, and give us the flexibility to truly address our customers’ unique requirements.
The integration of value-added services into our offering differentiates Lovitt Technologies Australia from other precision engineering houses. Having established our ability through aerospace and defence contracts, a project management team is ready to assist commercial customers with future requirements in this area.
355.59°
Acknowledging
value-added servicesas the next opportunity to deliver more
�����������������������������
�����������������������������
349.52°
166.192°
204.
586°
321.321°
90°
35.1
2°
132.27°
Prog
ress
ive
Prec
isio
n En
gine
erin
g
www.lovittech.com.au
Head Office207 Para Road, Montmorency VIC 3094 Ph: +61 3 9431 7300
Lovitt Technologies Australia is one of Australia’s largest independent precision engineering facilities. From our beginnings in 1954, as a tool maker to the automotive industry, we have progressed to the forefront of machining for aerospace, defence and communications.
Our skills have assisted customers in a range of other markets, including:
medical & scientific plastics & packaging food & beverage mining & energy petrochemical automotive, and security.
To support our growth into advanced markets, we have undertaken progressive capital acquisition and technological development. Our high-speed machining centres include 5-axis horizontal and vertical mills, 4-axis double-column mills and 7-axis lathes. We support the MasterCam™, Vericut™, Catia™ v5, and Pro Eng CAM applications.
During the past 50 years, precision engineering has evolved from the domain of meticulous craftsmen to computer-controlled machines. Lovitt Technologies Australia has recognised these and other significant trends in the industry, and has continuously adjusted its approach and adapted its offerings to suit customers’ changing needs.
Today, customers demand more than just machined components and ‘standard’ production runs. They look for a service provider who can address the unique requirements their current project presents: in materials, machining, assembly, volumes and supply arrangements. They demand flexibility.
Lovitt Technologies Australia stands apart in its ability to go beyond its core precision engineering capabilities. Furthermore, we partner with leading suppliers in allied industries – such as surface treating, electrical cabling and specialised testing – to present a component or assembly finished to the highest of international standards.
355.59°
Executing customer design within an advanced
precision machining environment
�����������������������������
�����������������������������
349.52°
166.192°
204.
586°
321.321°
90°
35.1
2°
132.27°
Prog
ress
ive
Prec
isio
n En
gine
erin
g
www.lovittech.com.au
Head Office207 Para Road, Montmorency VIC 3094 Ph: +61 3 9431 7300
Lovitt Technologies Australia is accredited and operating to Australian Quality Standards (Aerospace and Defence) AS9100 Rev B:2004 and International Quality Standard ISO 9001:2000.
Quality is central to all Lovitt Technologies Australia’s activities. The Quality Management System is designed to ensure that our attention to excellence goes beyond meeting design and contractual requirements.
Quality touches every aspect of the order, from quotation through to delivery, including:
purchasing traceability of raw material manufacturing and process control inspection, testing and verification non-conformance, corrective and preventative
actions, and maintenance of monitoring and measuring equipment,
including gauges, verniers, micrometers, and co-ordinate measuring machines (CMMs).
Central to operationalising quality at Lovitt Technologies Australia is the custom-built information technology system, LIMIS. LIMIS delivers real-time data on order tracking, production planning, scheduling, costing and control, and inventory management.
Quality audits are undertaken at regular intervals, complemented by external reviews by accredited standards agencies. Customers are welcome to inspect the quality management system on-site and initiate their own assessment as have Hawker de Havilland, Airbus (UK & France) and Boeing.
