+ All Categories
Home > Documents > Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1...

Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1...

Date post: 20-Aug-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
15
Transcript
Page 1: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof
Page 2: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

KUKDONGELECOM

World BestLighting CompanyInnovation Fireflyis the symbol of Kukdong Elecom

INNO Firefly meansI is Immediate improvementN is Never-say-die spritN is Nerver-ending challengeO is Open mindF is Firefly of kukdong elecom

To the Top Lighting Company in the World US$100 Million Volume.To the Top Lighting Company in the World US$100 Million Volume.

Page 3: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

KUKDONGELECOM

1992 ~ 1999Established as Kuk Dong Industries Co., Ltd.Merged & acquired the electrical manufacturing company, “Myung Sung Industries Co.”Listed as a member of Pusan Marine Equipment Association No. 80)Factory moved to Dadae-dong Saha-ku in Busan. (Area : 2,393 , Building Area : 5,334 )Acquired the Certificate for ISO 9001 Quality System from EAQA of United Kingdom.Received “USD 1 million export trophy” from the president and a letter of commendation from PrimeMinister at the 36th Trade Day. (Export sales record ; USD 2,300,000 / No. 45782)

2000Merged & acquired the electrical equipment company “Dong Seong Electric Co.”Changed company name to Kuk Dong Elecom Co.Ltd (KDECOM)

2001Appointed an Affiliate 1 Member of I.S.E.S(Intemational Ship Electrical & Engineering ServiceAssociation) under World-Wide Service Network

2002Acquired Certificate for ISO 9001/2000 Quality System from BVQl of FranceReceived “USD 5 million export trophy” from president and a letter of commendation from PrimeMinister, at the 39th Trade day.

2003Established a branch office in seoul Acquired the certificate for KS (Korean standard) from korean standard Association(No.03-4419)

2004Founded a 2nd factory, techology & research institute.

2005Completed “Innovation consulting”Received a government approval for the domestic development Project of -Project”

2006Took over 3rd factory of KTE (Be 2nd Kukdong Elecom Factory) Achieved the Certificate of Flame-Proof Lighting for Marine from Korea Marine Equipment Rearch Institute. Contracted “Sea Drill project” from DAEWOO Shipbuilding working with COOPER Crouse-Hinds. Kukdong Elecom Factory advanced into Dalian, China. Factory name : D.Kesko Co., Ltd Open thebranch office of Kukdong Elecom in Kamjun-dong, Busan Open the additional Web-site(www.kesko.co.kr)

2007Appointed as the leading company for a strategic industry from The Busan City. Accepted to supplyour lighting without the inspection from Hyundai Heavy Industries. Be Entrusted our lighting qualityby our inspection from DSME. Contracted “OFF SHORE project 6 Se” from LABROY in Singaporeworking with COOPER Crouse-Hinds.Acquired the ISO /KS A 14001 Quality System from BVQI of France

06-07 Navigation & General Lighting Fixtures

08-09 Flood & Search Lightss

10-11 Explosion - proof Lights

12-13 Reefer Container Sockets

14-15 MGF Packing System

16-17 Ex-proof Conn. Box

18-19 Power Saving Working Lights

20-23 Industrial Lighting Fixtures

24 Night Vision System

25 Cables, Partner Company (COOPER)

C o n t e n t s

C o m p a n y P r o f i l e

Page 4: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

7KUKDONGELECOM 6

The KUKDONG lighting fixtures are designed and manufactured as suitable structure to ship s condition

Navigation & General Lighting Fixtures

Navigation & Signal LightsLamp holder base makes the absorption of ship’s vibationpossibleImproved the existing one-side hinged type to the dual hingedtype for separation of the upper and lower parts to be preparedmounting hinge to make the installation on the desirous anyposition possible, such as Port Side Light on port side,Starboard Side Light and other Lights on starboard side, in nointerference with structure of the hull.Fitting slit holes(155.8~178mm) make the interchange of otherproducts possible

Fluorescent LightsThe fluorescent lights are possible manufacture suitable for use inrooms with low temperatures (from -40°C to +5°C) on reguestspecification.Improved illumination of fluorescent lights to make the diffusion ofluminous intensity with the wave form and transparency prismaticof surface on the diffuser possible.The lamp holder with spring type makes the absorption ofvibration possible.

The decerative lights are designed by the refined, vibration proofand structure suited to ship

Decorative Lights

Receptacle and SwitchesThere are various types of receptacles and switchesThere are classify according to the a shape, a grade of ingressprotection and international standards.

Capacity are- Receptacles : 250VAC, 16A, 2P+1E

: 500VAC, 32A, 3P+1E- Switches : 250VAC, 16A, DPST or DPDT

Some important features are;Perfect water-tightShock and Vibration ProofMaximized IlluminationReduced the Weight to the MinimumRefined Design and structure Suited to shipEasy to Maintenance

Maximized the lifetime of lamp to be prepared Lamp Holder Base ofan impact reistance and vibration absorption type to make the

absorption of ship’s vibration possble.Prepared Lamp Holder Base to make the separation of it possible,and to easy wiring connection with terminal block for the external

connection on the rear base.

Incandescent Lights

Page 5: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

8

Flood & Search Lights

The high pressure sodium floodlights are included instantignition and separated ballast box.

Connection box with ignition are installed on the outside offloodlights

specificationMaterials : Stainless steelIngress protection : IP67

Front glass : Herdness glassReflector : Highly polished aluminium.

Lamps : H.P.S 250W, 400W, 400W 2

H.P Sodium Flood Lights

Elec. Motor Cont. Search LightsThe searchlights are available with halogen lamps from500W to 3000W and xenon lamps from 550W to 7000W

specificationMaterials : Stainless steelIngress protection : IP56Movement : Horizontal 350°, 11°/sec

Vertical +20°, -40°, 3°/sec.Drive motors : 2 pan and 1 filt gear motors Gear made of

cast brassHeater : Optional with anti-condensation heter.

For Halogen Search LightsRemote control panel : standard with searchlight on-off sw,joystick and centrol camps.Optional with searchlight for remote focus and lamp ignition.

For Xenon Search Lights Remote control pamel : switching for power on-off, movementjoystick, remote focus and lamp ignition.Power supply unit : With regard to Xenon Lamp Ballast which isthe system if SMPS(Switching Mode Power Supply), the powersupply source of alternating current and it is switched on 70KHz,and the power supply source conversed to the direct currentnear about 100% is supplied to the lamp and then the lamp’s efficiency. It guarantees extremely long lamp-life.

The suez canal searchlights are designed andmanufactured in compliance with the specification of the

suez canal authority.This are approved by ABS register of shipping.

specificationMaterials : Stainless steelIngress protection : IP56

Front glass : Hardness glassReflector : Splitted glass parabolic mirror φ610mm

Lamps : Available with 2KW or 3KW lamps Lamps are mountedon changeover system. included main and spare lamp

Suez Canal Search Lights

Fixed/Cabin Cont./Signalling Search LightsThere are the deck mounting type and manual operation type.(Non-standard lengths of control rods available on request).

specification Materials : Stainless steelIngress protection : IP56Front glass : Hardness glassReflector : Glass parabolic mirrorLamps : Halogen lamps form 500W to 3000W

The housing of incan./mercury floodlights made of seamlesslyspinning stainless steel.

The external connection box enables to easy wiring.

specificationMaterials : Stainless steelIngress protection : IP67

Front glass : Hardness glassReflector : Parabolic aluminium, Ni coating

Lamps : lncan. lamps from 200W to 1000W mercury lamps from250W to 700W

Incan./Mercury Flood Lights

Halogen Flood LightsThe housing of halogen floodlight made of seamlesslydrawn stainless steel.The external connection box enables to easy wiring.

specificationMaterials : Stainless steelIngress protection : IP67Front glass : Herdness glassReflector : Highly polished aluminium.Lamps : Halogen lamps from 100W to 1000W

9KUKDONGELECOM

Page 6: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

10

Explosion - proof Lights

Design : According to rules of the standard IEC 79-0, 79-7, Materials : Incan. ceiling light - Cast brass/Hardness glass.

: FL ceilng light - Stainless steel/Polycarbonate

Exe, Incan./FL Lhght

Design : According to rules of the standard IEC 79-0, 79-1Materials : Housing - Cast aluminium(AC 7A)

: Diffuser - Hardness glass

Exd, Incan. Flood LightsDesign : According to rules of the standard IEC 79-0, 79-1Materials : Housing - cast aluminium(AC 7A)

: Diffuser - Hardness glass

Design : According to rules of the standard IEC 79-0, 75-15Materials : Housing - Stainless steel

: Diffuser - Hardness glass

Exn, Flood light

Design : According to rules of the standard IEC 79-0, 79-1Materials : Housing - cast aluminium(AC 7A): Diffuser - Polycarbonate or Hardness glass

Exd, Incan./FL Lights

Exd, Switch/BellDesign : According to rules of the standard IEC 79-0, 79-1Materials : Rotary Switch - Cast brass

: Limit switch/Bell - Cast aluminium

The Ex-proof elec. equipment are designed and manufactured according to the construction rulesstated in the series of IEC standards 60079-0(general), 60079-1(Exd), 60079-7(Exe), 60079-15(Exn)and 60079-18(Exm).

Exd, H.P.M/H.P.S Flood Lights

11KUKDONGELECOM

Page 7: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

13KUKDONGELECOM 12

Reefer Container Sockets

The plug cannot be withdrown unless the switch or circuitbreaker is opened, and the switch or circuti breaker cannot beclosed unless the plug is fully inserted.

Mechanical protection for up/down lever type

Electrical protection for Push/Full typeThe locking device interlock systems reduce the danger of electricalshock to operators, preventing circuit activation until the plug is fullyinserted and the on/off lever is pushed in. (socket remains de-energized until a reefer plug is properly mated and the operatinglever is engaged)Conversely, if the plug is withdrawn while under load, the circuitbreaker is automatically tripped.(socket is de-energized manuallywith operating lever or automatically, if the plug is withdrawn)

FeaturesThe Standard types

Heavy gauge powder coated stainless steel enclosure and integralmounting bracketsAll modular sockets factory pre-wired to power distribution bus Ground activated interlock mechanismCircuit breaker with 15KA AC rated breaking capacityCircuit breaker trip resting : 30 Ampere, 480 VACConstruction : stainless steel housing and interlock mechanism, impactresistant non-metallic sockets and screw cap, nickel plated brasscontactsIngress protection class : IP56

The altenative and Optional TypesNon-standard mounting Flange or Socket Orientations

custom designed enclosuresPre-wired monitoring sockets and systemsPlug-in moduleNon-standard circuit breaker trip ratings and interrupting capacitiesElectrical interlocking mechanismCircuit breaker auxiliary contactsMultiple cable entry and exitIngress protection class : IP67

There are eight standard sizes from 1Gang to 10Gang.Other types available on request

Materials for units the surfaceThe design advantage is in the use of durable corrosion resistant materials in all products.These materials have been proven to withstand harsh marine and other climatic conditions.The case of reefer container sockets and lever of switch operation made of stainless steel. The cockets made ofpolycarbonate with uv or cast brass, and cap for socket made of polycarbonate with uv.

There are two types of reefer container sockets.The type of sockets become different in accordance to a method of locking device for operating lever.

4 Gang

2 Gang 3 Gang

10 Gang

5 Gang

Page 8: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

14

The MGF Packing System is the excellent fireproof, low smoke water and gastight method ofpassing cables from one compartment to another, It is simple, expedient and economical-giving much more protection than conventional stuffing tubes while drastically reducing timeand installation cost.

MGF Packing System

LB type insert blocks consists of twin half blocks made out of anEPDM rubber, and those have removable layers for multidiameter

modules and a center cores.

The blocks are available for diameters from 3.5mm to 99.0mm

LB Type Insert Blocks

Penetrations of bulkhead and deck for Water-tight, gistight,fireproof and low smoke.

penetration for weather deck.penetration for electrical equipment.

Fire and explosion-proof of hazardous areasThermal barrier for all penetrations

Sound and vibration-free in entries for cables and pipes

Application

RGS Type FrameRGS is standard frame of MGF Packing System.It has standard dimensions of internal width 120mm and depth60mm.There are four sizes of RGS 2, RGS 4, RGS 6, and RGS 8 accordingto their height.Multiple frames consist of two or more frames arranged eitherhorizontally, vertically or a combination of both.

RGS frame is made of mild steel, stainless steel or aluminium alloy.RGSF frame = RGS frame + Flange.RGSS frame = RGS frame + Welded collar.RGSR frame = RGS frame + Round corners.

RGP is a round penetration to effectively seal cables and pipespassing through circular apertures.

There are four standard sizes that is formed by tightening thecompression bolts to be able to expand the seal radially.

RGPO is the open version of RGP

RGP Type Frame

The EMP/EMI MGF Packing series frames and componentsprovide the same protection as the standard MGF Packing System

but with added, built - in protection against electromagenticpulse(due to lightning or nuclear blast) and interference, electronic

sabotage(synthetic EMP) and static electricity.The secret is a tempered metal sheet which systematically stops

electricla current from passing along the cable screening throughthe seal and successfully functions as an extended wall screen.

All dimensions are exacttly the same as the standard MGFPacking System components.

A more detailed description of the EMP/EMI

EMP/EMI Type Components

IB Type ComponentsIB type insert blocks are available for diameters from 4.0mm to 100.0mmBlocks is made of EPDM rubber

15KUKDONGELECOM

Endpacking

Compression Plate

Spare BlockStayplate

Insert Block

Page 9: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

17KUKDONGELECOM 16

The Ex enclosures apply installation to the hozardous areas zone 1 and zone 2 in accordancewith IEC 79-0, 79-1 and 79-7The body and door of Exenclosures made of stainless steel.Hinged door and can lock make more easier on assembly and inspection work.

Ex-proof Conn. Box

Ex-Proof Conn. Box With Screw Retained cover

EX-Proof Cable Gland (NPT Type)Ignition group : Exd IIcDual certification for hazrdous “d” and “e”- Exd II - Exd IIB

- Exd IIc < 500cm2

Material : Brass ( C2680 1/2H )

Ignition group : Exd IIcMaterial : Brass (C2680 1/2H)

EX-Proof Cable Gland (PC Type)

Type of protection : EX ”d” Flameproof enclosureCapacity : 250VAC, 4P, 30A

Ingress protection : IP66 according to IEC529Cable entries : Brass NPT 3/4” as standard

Material : Cast brass

EX-Proof Junction Box

EX-Proof Cable GlandsA device designed to permit to the entry of an insulated cable,flexible cable, or core, into an equipment, and which providessealing and retention.

It may also provide other features such as earthing, armourclamping, insulation, cable guarding devices. Strain relief devices.etc., or a combination of these.

IP: the sealing between the cable gland and its support, when fixedeither directly or the intermediary of an accessory(reducer, etc) canbe assured by the use of a sealing washer or by an adequateproduct (tape, paste, etc.)to meet the required IP grade

Ex-Proof Conn. Box With Hinged Door

Type of protection : EX ”e” lncreased safety.Design : With hinged door. Other type(bolted cover) available

on request.Ingress protection : IP56 according to IEC529.

Gland plate : Optional with top, bottom, left and right plates.Cable entries : Brass XPG type as standard. Other thread forms

available on request.Cable glands fitted to customer specification.

Terminal block : Customised terminal population available onrequest.

Surface fivish : Brusged, Alternative finishes available

Page 10: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

Power SavingWorking Lights

Type of protection : EX ”e” lncreased safetyapplication : According to rules of the standard IEC 79-0, 79-7

Ingress protection : IP66 according to IEC 529Cable entries : PBT, XPG -13.5c as standard

Material : Polycarbonate

Ex-Proof Portable/Hanger Type

Make sure of reduced man power costs

Connection cable ass’yApplication : MS connector type of cable inlet

Cable WKOCF-1.25mm2 2C with plug (2P+1E)

Magnetic hangerAppltcation : Steel ceiling and wall on shipboad and yards

Cable Ass’y/Magnetic Hanger

Application : In new shipbuilding at shipyards as portableworking lights while sanding, painting, welding,

installing, ... etc.Ingress Protection : IP66 ( EL-F32 Type)

Explosion Protection : EXe II T3 (ELX-F32 Type)Lamp capacity : FPL32W, G24

Power saving light with electronic ballast unitOptimal luminous efficiency with 32W compact lamp

rapid-startNo light flickering

Radio interference elimiationDiffuser with bayonet fixing, made of UV polycarbonate,

high impact resistantIngress protection : IP66

Light weights : 0.95kg

The temporary lighting system

The features

12 times lifetime compared to incandesent filamentlamps

Enormous power savings lead to fast return of investment whileusing ELECOM working lights

e.g : 26W ELECOM working light 150W incan. filament light 32W ELECOM working light 200W incan. filament light

- Decision point : Return of investment after 3-5 months

Bracket / Portable TypeShock resistant

Housing made of highly shock resistant polycarbonateElectronic ballast, shock and vibation protectedLampholder base & pin to protect the lamp

- Decision point : Very long lifetime of lighting flxture

Stand TypeCapacity : 220VAC, FPL36W lamp 4ea with receptacle220V, 16A, 2P+1E, double 2pcs, IP44Ingress protection : IP44 according to IEC 529Materal : polycarbonate

80% reduction of power consumption with thesame light efficiency

Extremely ecomomical, lifetime of lamps is ten times greater thanincandesent filament typesImmediate ignition - even at low temperatures (-20 C)Not sensitive to exterior impacts or vibrationsAlmost no glare light, no flare ignition, no ficker light

- Decision point : Feduced maintenace = Reduced manhours

Hanger Type

19KUKDONGELECOM 18

Page 11: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

21KUKDONGELECOM

Industrial Lighting Fixtures

Project Lightsspecification

Material : Housing - Aluminium: Front glass - Hardness glass

Capacity : Incan/H.P.Sodium/mercury/Metal halide lamps, up to 1000W

Lamp holder : E39/40Ingress protection : IP44/56

Incandescent Dome Lightsspecification

Materials : Housing - Stainless steel: Globe - Hardness glass

Capacity : Incan. lamps, up to 100W 1EA or 2EALamp holder : E26/27Ingress protection : IP56/IP67

specificationMaterials : Stainless steel or Brass

Capacity : Incan. lamps, up to 500W: Mercury lamps, up to 400W

Lamp holder : E39/40Ingress protection : IP44/56

Project Lights

20 21

H.P. Sodium Flood Tunnel Lightsspecification

Materials : Housing - Stainless steel: Front glass - Hardness glass

Capacity : H.P. Sodium lamps, up to 400WLamp holder : E39/40Ingress protection : IP56/IP67

N.W.T Fluorescent Lightsspecification

Materials : Zine coated steel sheetCapacity : FL 20W 2, 32W 2, 40W 2Lamp holder : G13(Locking type)Ingress protection : IP20

specificationMaterials : Body - Stainless steel

: Diffuser - PolycarbonateCapacity : FL20W 2, 32W 2, 40W 2

Lamp holder : G13(Locking type)Ingress protection : IP56/IP67

W.T Fluorescent Lights

specificationMaterials : Housing - Stainless steel

: Front glass - Hardness glassCapacity : Fluorescent lamps, 55W 3

Lamp holder :2G11Ingress protection : IP56/IP67

FL Flood Tunnel Lights

Flood Tunnel Lightsspecification

Materials : Housing - Diecast aluminium: Diffuser - Hardness glass

Capacity : Incan./H.P.Sodium/Mercury/Metal halide lamps, up to 250W

Ingress protection : IP56

Page 12: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

Industrial Lighting Fixtures

IPH-20W, IL20W

IPH-60WH, IL60W IKHN-20W, IL20W

IKH-60W, IL60W IBH-60W, IL60W

IPH-60W, IL60W

FPH-15W, FL15W IKHN-60W, IL60W

Rotary Switch JIS TypeSR-S1W-P

Plug, L - TypeJIS or new JIS Type PG-J3W2PL

Rotary Swith with Pilot Lamp SRL-S1W-P

N.W.T 4-module RT-D34NF

Junction Box(2,4 and 6way) JBW-46QP

Recep.w/Switch JIS or new JIS TypeRTS-J31W-P

ReceptacleJIS or new JIS TypeRT-J31W-P

Recep.w/SwitchDIN TypeRTS-D31W-P

23KUKDONGELECOM 22

Page 13: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

25KUKDONGELECOM 24

Night Vision System

This system is searchlight which have a watch function at night time of combined use for day and night by imaging

a long distance of target as real time on dark night that normal visible camera can’t catch with assembling high

sensitive CCD camera and light source for night watch with a long distance transmission searchlight.

As most of usual night vision system can catch a haet which is emitted from target object, The image can be

catched only type like size. However, our system project near infrared from searchlight and can catch ship mark,

ship name, details of seaman and objection.

As camera is replacement of near infrared, it can make the best functions by high-function 33M of lens.

As remote control type installed infrared filter(800 on searchlight, Light source can use by controlling infrared

and visible rays and it can be used for narmal seach light too.

Searchlight and camera are operated in one body, it can control smoothly and simply joystick controller with watching monitor.

Lamp capacity of searchlight can be chose according to distance of target objection(300W~6,000W).

Night vision system can have stable image with stabilizer sensor.

Characteristic

KSPS-ID660X1-NV Type

Watching Unlawfulness ShipWatching Fishing ClandestinelyWatching Habor and BayWatching Fishing Ground

Camera & Lens KSPS-TD316X1-NV Type

Kuk Dong Cables

Cables, Partner Company (COOPER)

Power transmission & distributionIndustrial applicationShipboard & offshore applicationRolling stockBuilding constructionTelecommunicationExtension & compensation

COOPER Crouse-Hinds

Stock sales(on just in time) for Kukdong Cable

Tanker & FPSO’s & PlatformsOnshore Marine TerminalsSpecialty VesselsFerriesPassenger & Car Transport ShipsHarbour WorkboatsCargo Ships, Oil Trakers, LNG Carriers

Worldwide Target Markets

CEAG GmbH

Portable LampsFluorescent Light FittingsFlood LightsControl UnitsSwitchgears and DistributionsSafety BarriersBus Systems

Explosion Protected Products

Page 14: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

The InternationalApprovals & Certificates

KUKDONGELECOM

has been appointed an Affiliate 1 Member of I.S.E.S.has been appointed an Affiliate 1 Member of I.S.E.S.

The First Qualified Manufacturer ofLighting Industries in Koreaas a member of ISES ( International Ship Electricaland Engineering Service Association Limited)under World - Wide Service Network !!

Page 15: Company Profile · Exd, Switch/Bell Design : According to rules of the standard IEC 79-0, 79-1 Materials : Rotary Switch - Cast brass: Limit switch/Bell - Cast aluminium The Ex-proof

Recommended