COMPANY, INC. RUBBER - abbottrubber.com · Construction: Black 100% EPDM rubber tube reinforced...

RUBBERCOMPANY, INC.

RUBBERCOMPANY, INC.

RUBBERCOMPANY, INC.

RUBBERCOMPANY, INC.

RUBBERCOMPANY, INC.

CATALOG CH-43

Contractor'sHose &

Accessories

RUBBERCOMPANY, INC.

DEALER PRICE LIST - FEBRUARY 2018

RUBBERCOMPANY, INC.

2

1700 Nicholas Blvd.Elk Grove Village, IL. 60007

(847) 952-1800OUT OF STATE TOLL FREE

(800) 852-1855FAX

(847) 952-0156

We welcome you to visit our 85,000 square foot facilities in Elk Grove Village IL.

Order Entry and Technical Assistance - Our Specialty

Unparalleled Personalized Service

‘We Sell The Good Stuff’Why buy anything else?

INDEXItem ...........................................Page

Water Suction Hose ...............4-5Water Discharge Hose ..........6-8Pump Hose Kits .....................9Air & Water Hose ...................10-14Cleaning Equipment Hose .....14Special Purpose Hose ...........15-17

Item ...........................................Page

Couplings & Accessories .......18-23Pipe Fittings ...........................24Hose Clamping Systems .......25Hydraulic Hose Assemblies ...26Hydraulic Hose Accesories ....27

E-MAIL [email protected] www.abbottrubber.com

www.abbottrubber.com800-852-1855

Large inventory of bulk hose and coupled assemblies. Over 1,000 assemblies in stock.

We can fabricate to your exact hose needs.

All of our hose assemblies are fabricated according to the latest NAHAD Guidelines for Industrial Hose and NAHAD Guidelines for Hydraulic Hose

THE ASSOCIATION FOR HOSE AND ACCESSORIES DISTRIBUTION

Serving the Construction Industry for Over 65 Years

M E M B E R

3www.abbottrubber.com800-852-1855

SUCTION HOSE

Service: Water suction and discharge hose designed for construction, mining, marine and irrigation purposes. Temperature range: 15°F to 150°F.

Service: An all plastic, highly flexible, crushproof, non-kinking and lightweight hose. Flexibility maintained to -50°F below zero.

Construction: Green, flexible, abrasion resistant PVC with a rigid PVC reinforcement for full vacuum. Smooth bore. Also available in clear construction.

Construction: Spiral welded. Pliable yellow smooth interior. Tough, abrasion resistant black plastic ribs. Furnished with leak proof vinyl cuffs permanently attached each end. Will handle full vacuum.

LESS 5% FULL COILS OF 100 FT THRU 6” I.D.

STOCK LENGTHS AVAILABLE TO 50 FT.

Service: All weather, low temperature suction and discharge hose. Lightweight and flexible. Ideal for septic handling and construction service. Temperature range: -40°F to 140°F.

Construction: Black 100% EPDM rubber tube reinforced with a green polyethylene plastic helix. Abrasion resistant cover. Also available in blue or red color most sizes.

LESS 5% FULL COILS OF 100 FT.

I.D.W/P

@70ºF Price/FtPrice/ 20 Ft w/ M+F Cplgs

Price/ 20 Ft w/ C+Nipple Cplgs

1” 85# $ 1.56 $ 61.50 $ 58.501¼” 80# 1.70 87.00 69.001½” 70# 1.80 62.00 72.502” 65# 2.40 78.50 88.502½” 65# 4.96 152.50 160.503” 55# 4.52 144.00 157.004” 50# 8.40 262.50 271.506” 40# 15.82 514.50 550.508” 30# 44.50 1782.00 1511.50

I.D.W/P



1¼” 50# $ 2.46 $ 102.00 $ 84.501½” 50# 2.90 84.00 94.502” 50# 4.18 114.00 124.002½” 50# 6.98 193.00 201.003” 45# 7.96 212.50 225.504” 40# 15.94 413.50 422.506” 25# 30.20 802.50 838.00

I.D.W/P



1½” 20# $ 6.20 $ 150.00 $ 160.502” 15# 8.50 200.50 210.503” 7# 14.20 337.50 350.504” 5# 25.50 604.50 613.50

(Series 1230)

(Series 1220)

(Series 1240)

Made in U.S.A.

Made in U.S.A.

Made in U.S.A.

4

PVC Water Suction Hose

Crushproof Water Suction Hose

All Weather Water Suction Hose


SUCTION HOSE

Service: General purpose water suction hose for contractors, industrial, and agricultural service. Temperature range: -10°F to 180°F.

Service: Ideal for applications requiring suction of abrasion resistant materials such as crushed rock, sand, gravel, or cement. Temperature range -40°F to 140°F

Construction: Black smooth EPDM blend rubber tube, fabric plies and steel wire spiral for full vacuum service. Black rubber cover.

Construction: Black special abrasion resistant compound supported by a rigid PVC helix. Static dissipating.


LESS 15% FULL COILS OF 100 FT. THRU 6” I.D./ 50 FT 8” I.D. THRU 12” I.D.

Service: Specially designed for suction or transfer applications where visual flow or pressure is required. Temperature range: 15°F to 140°F.

Construction: Flexible PVC, clear, with an orange rigid PVC helix. Reinforced with a layer of spiral yarn.


I.D.W/P

@70ºF Price/Ft1½” 45# $ 5.962” 40# 9.662½” 35# 12.343” 35# 16.323½” 30# 25.644” 30# 26.825” 30# 40.746” 30# 51.827” 30# 65.128” 30# 86.3010” 28# 122.0012” 25# 151.90

(Series 1210)

(Series 1242)

(Series 1630)

Made in U.S.A.

Made in U.S.A.

I.D.W/P



1¼” 150# $ 6.20 $ 177.00 $ 159.001½” 150# 6.70 160.00 169.002” 150# 7.82 187.00 197.002½” 150# 9.70 247.50 255.503” 150# 11.54 284.50 297.504” 125# 18.42 463.00 479.006” 100# 34.25 883.50 918.508” 75# 61.80 2122.00 1851.5010” 75# 96.56 ------ ------12” 75# 126.18 ------ ------

I.D.W/P



1½” 100# $ 6.54 $ 157.00 $ 167.502” 100# 7.84 187.50 197.503” 100# 9.28 239.50 252.004” 75# 13.92 373.00 382.006” 70# 28.48 768.00 803.508” 60# 46.96 1825.00 1555.0010” 40# 72.20 ------ ------12” 25# 114.38 ------ ------

Rubber Water Suction Hose

Abrasion Resistant Suction Hose

Clear Braid PVC Water Suction/Transfer Hose


WATER DISCHARGE HOSE

Service: Designed for open end moderate water discharge service. Strong, lightweight and flexible lay flat hose for construction site service.

Service: Heavy duty premium quality discharge hose for use in higher pressure open end applications.

Construction: Close woven polyester jacket impregnated with PVC. Mildew resistant. Rolls up flat for easy storage. Blue in color

Construction: PVCreinforced with three spiral plies of polyester. Mildew resistant. Rolls up flat for easy storage.Red in color

LESS 10% FULL COILS OF 300 FT. THRU 8” I.D.10” I.D. THRU 16” I.D. AVAILABLE IN 100 FT. COILS ONLY

(Series 1152)LESS 10% FULL COILS OF 300 FT.

Service: Medium duty open end water discharge hose designed to handle a wide range of applications in construction, industry, and agricultural service.

Construction: PVC tube and cover reinforced with spiral polyester. Mildew resistant. Rolls up flat for easy storage.Green in color

LESS 10% FULL COILS OF 300 FT. (Series 1142)

(Series 1148)

Made in U.S.A.

(1½” ID thru 8” ID)Made in U.S.A.

I.D.W/P


Price/ 50 Ft w/ C+E Cplgs

1” 100# $ .84 $ ------ $ ------1½” 80# .74 59.00 71.502” 80# .78 65.50 77.502½” 65# 1.86 137.00 146.003” 80# 1.58 124.50 141.504” 70# 2.18 192.50 206.006” 60# 4.18 386.50 422.008” 35# 8.40 1270.00 1043.5010” 35# 21.80 ------ ------12” 30# 30.00 ------ ------14” 30# 64.00 ------ ------16” 30# 75.00 ------ ------

I.D.W/P



2” 80# $ .98 $ 74.50 $ 86.503” 80# 1.98 142.50 159.50

I.D.W/P



1½” 150# $ 1.52 $ 94.50 $ 107.002” 150# 1.98 119.50 131.502½” 150# 3.80 224.50 234.503” 150# 2.96 186.50 203.004” 150# 4.42 293.50 307.006” 150# 7.56 538.50 574.508” 70# 12.60 1459.50 1235.50

(thru 4” ID)

Made in U.S.A.

6

Blue PVC Water Discharge Hose

Red Heavy Duty PVC Water Discharge Hose

Green Contractors PVC Water Discharge Hose



Service: General purpose layflat water discharge hose.

Service: Light duty generalpurpose lay flat water discharge hose.

Service: Recommended for open end use with high capacity pumps in irrigation and construction.

Construction: Black SBR age resistant rubber tube. White single-jacket all polyester cover. Will not absorb moisture.

Construction: Black rubber tube. White single-jacket all polyester cover. Will not absorb moisture.

Construction: Heavy PVC/Nitrile tube reinforced with extra heavy fabric. Cover is yellow abrasion resistant PVC/Nitrile. Also available in Black color.

AVAILABLE IN 25, 50 OR 100 FT. LENGTHS ONLY

AVAILABLE IN 25, 50 OR 100 FT. LENGTHS ONLY

(Series 1132)

(Series 1130)

(Series 1131)

(Series 1166)AVAILABLE IN 25, 50 OR 100 FT. LENGTHS ONLY

Service: Lay flat water discharge hose featuring a double-jacket for greater abrasion resistance and service pressure.

Construction: Black SBR age resistant rubber tube. White double-jacket all polyester cover. Also available with red, yellow or black impregnation at additional charge. ASSEMBLY INCLUDES INTERNAL EXPANDED ALUMINUM COUPLINGS

AVAILABLE IN 50 FT. LENGTHS ONLY

Made in U.S.A.

I.D.W/P



1” 150# $ 2.04 $ 127.00 $ 131.501½” 150# 1.88 120.00 132.502” 150# 2.48 154.50 166.002½” 150# 3.50 228.50 238.003” 150# 3.80 243.50 260.504” 150# 6.46 417.50 431.00

I.D.W/P



1½” 125# $ 1.28 $ 90.00 $ 102.502” 125# 1.40 100.50 112.502½” 125# 2.04 155.50 165.003” 125# 2.32 169.50 186.504” 125# 3.40 264.50 278.006” 125# 7.50 573.50 609.00

I.D.W/P

@70ºF Price/Ft

Price/ 50 Ft w/ M+F Cplgs

1½” 200# $ 1.60 $ 136.002” 200# 2.18 182.502½” 200# 2.90 230.003” 200# 3.90 339.504” 150# 6.50 628.50

I.D.W/P



1½” 200# $ 3.40 $ 196.00 $ 208.502” 200# 4.05 233.00 245.002½” 200# 4.80 293.50 303.003” 200# 6.32 369.50 386.504” 175# 9.12 550.50 564.006” 125# 14.16 906.50 942.008” 125# 25.20 2152.00 1925.50

Heavy Duty #150 Mill Discharge Hose

#125 Mill Discharge Hose

Extra Heavy Duty PVC Water Discharge Hose

Double Jacket #200 Mill Discharge Hose



Made in U.S.A.

Service: Top grade water discharge hose for industrial and construction applications. Temperature range -10°F to 150°F.

Construction: Black SBR rubber tube, 2 or 4 ply equivalent of woven polyester fabric. Black abrasion resistant SBR rubber cover.

AVAILABLE IN 25, 50, 100 FT. LENGTHS ONLY

Service: Medium duty lay flat oil resistant discharge hose for high capacity pumps. Temperature range -20°F to 180°F.

Service: Moderate pressure water hose assembly for contractors and industrial service.

Service: Low cost water hose assembly for contractors and industrial service.

Construction: Extruded PVC/Nitrile reinforced with circular woven polyester. Black or yellow ribbed cover.

Construction: Contractors grade black rubber assembly includes machined brass GHT couplings thru ¾”, NPSH couplings 1” thru 2” I.D.

Construction: Quality reinforced green cover PVC includes spun-brass GHT couplings thru ¾”, machined brass NPSH couplings 1” I.D.

AVAILABLE IN 50 OR 100 FT. LENGTHS ONLY

CONTACT US FOR NON-STANDARD LENGTHS


I.D. PliesW/P

@70ºF Price/Ft1½” 2 100# $ 4.881½” 4 150# 7.722” 2 100# 6.702” 4 150# 9.882½” 2 100# 8.182½” 4 150# 11.523” 2 100# 10.383” 4 150# 13.304” 2 100# 13.444” 4 150# 18.266” 2 75# 22.486” 4 125# 30.128” 4 100# 49.4210” 4 75# 61.5412” 4 50# 81.82

(Series 1167)

(Series 1112)

(Series 1115)

(Series 1120)

I.D. BraidW/P

@70ºFPrice/ 50 Ft w/ M+F Cplgs

5/8” 1 150# $ 83.503/4” 1 150# 88.003/4” 2 200# 113.501” 2 150# 154.001½” 2 150# 290.002” 2 150# 565.00

I.D. BraidW/P

@70ºFPrice/ 50 Ft w/ M+F Cplgs

5/8” 1 125# $ 25.003/4” 1 125# 60.001” 1 125# 180.00

Made in U.S.A.

I.D. PlyW/P

@70ºF Price/Ft1½” 1 200# $ 3.402” 1 200# 4.052½” 1 200# 4.803” 1 200# 6.324” 1 175# 9.126” 1 125# 14.168” 1 125# 25.2010” 1 125# 31.9212” 1 125# 38.88

8

Rubber Water Discharge Hose

Industrial Discharge Hose

Rubber Water Hose Assembly

Plastic Water Hose Assembly


PUMP HOSE KITS

Includes• 20 Ft. Series 1240 PVC Suction Hose Assembly (1” is 10 Ft.)• 50 Ft. Series 1148 PVC Discharge Hose Assembly (1” is 25 Ft.)• Spanner Wrench (Male & Female Kits only, not included on 1” Kit)• Steel Strainer (Please specify Round or Square Hole)• 2 Aluminum Part ‘A’ Adapters (Quick Coupling Kits only)• Box for above with label (Customized Labels Available)

• Choose from a wide selection of stock Water Suction

Hose Kits below.

• Kits are supplied in a retail box with a color label.

• We can custom make just about any Water Suction

Hose Kit requirement.

Includes• 20 Ft. Series 1220 All-Weather Suction Hose Assembly • 50 Ft. Series 1142 PVC Discharge Hose Assembly• Spanner Wrench (Male & Female Kits only)• Steel Strainer (Please specify Round or Square Hole)• 2 Aluminum Part ‘A’ Adapters (Quick Coupling Kits only)• Box for above with label (Customized Labels Available)

Includes• 20 Ft. Series 1210 Rubber Suction Hose Assembly • 50 Ft. Series 1130 Mill Discharge Hose Assembly• Spanner Wrench (Male & Female Kits only)• Steel Strainer (Please specify Round or Square Hole)• 2 Aluminum Part ‘A’ Adapters (Quick Coupling Kits only)• Box for above with label (Customized Labels Available)

QUICK COUPLING SUCTION HOSE IS ‘C’ X NIPPLE - DISCHARGE HOSE IS ‘C’ X ‘E’



(Series 1240KIT)

(Series 1220KIT)

(Series 1210KIT)

1” 1½” 2” 3” 4”M&F Thread $ 89.50 $ 138.50 $ 165.75 $ 314.75 $ 492.50Quick Coupling ------ 166.00 193.50 347.75 535.75

2” 3”M&F Thread $ 210.00 $ 388.25Quick Coupling 238.00 434.25

1½” 2” 3” 4”M&F Thread $ 297.50 $ 384.75 $ 561.00 $ 919.00Quick Coupling 323.50 390.50 607.00 968.00

Made in U.S.A.

AskAbout our custom

printed labels with your

company name on the box.

Made in U.S.A.

PVC Water Suction Hose Kit

Pump Hose Kits

All-Weather Water Suction Hose Kit

Rubber Water Suction Hose Kit


AIR & WATER HOSE

LESS 10% FULL REELS OF 600/700 FT.

LESS 10% FULL REELS - 500/600 FT.

LESS 10% FULL REELS ¼” THRU 1” I.D. - 500/600 FT. 1¼” THRU 2” I.D. - 300/400 FT.

Service: Quality, rubber-like, PVC hose that can be used for air and water applications. Operating temperature range -10°F to 150°F.

Service: Economical hose that performs many jobs efficiently. Used for air and water service where little oil resistance is required. Temperature range -20°F to 190°F.

Service: A medium duty general purpose hose for handling air and water applications. Non-conductive. Temperature range -20°F to 180°F.

Construction: Lightweight and flexible oil resistant PVC tube and cover with polyester reinforcement. Available with red or blue cover. Yellow cover available most sizes.

Construction: Black, EPDM, age resistant rubber tube reinforced with 1 or 2 braid equivalent spiral reinforcement. Abrasion and weather resistant red or black EPDM rubber cover.

Construction: Black, Nitrile, oil resistant rubber tube with 1 or 2 braid equivalent of spiral reinforcement. Red Neoprene, good oil, abrasion and weather resistant cover. Black cover available most sizes.

I.D. Braid O.D.W/P

@70ºF Price/Ft1/4” 1 .450 300# $ .563/8” 1 .600 300# .621/2” 1 .780 300# 1.243/4” 1 1.110 250# 1.961” 1 1.380 200# 2.82

I.D. Braid O.D.W/P

@70ºF Price/Ft1/4” 2 .562 300# $ 1.683/8” 2 .687 300# 2.001/2” 2 .875 300# 2.643/4” 2 1.156 300# 3.561” 2 1.437 300# 8.34

I.D. Braid O.D.W/P

@70ºF Price/Ft1/4” 1 .500 200# $ .881/4” 2 .531 250# .921/4” 2 .531 300# 1.165/16” 1 .593 200# 1.003/8” 1 .656 200# 1.053/8” 2 .685 250# 1.203/8” 2 .690 300# 1.381/2” 1 .812 200# 1.321/2” 2 .843 250# 1.521/2” 2 .875 300# 1.885/8” 1 .937 200# 2.055/8” 2 .970 250# 2.253/4” 1 1.125 200# 2.063/4” 2 1.156 250# 2.361” 2 1.437 200# 3.381¼” 2 1.750 200# 6.351½” 2 2.000 200# 7.752” 2 2.500 200# 13.10

(Series 1048)

(Series 1024)

(Series 1010)

Made in U.S.A.

Made in U.S.A.

Made in U.S.A.

10

PVC Air Tool Hose

General Purpose Air/Water Hose

Industrial Air/Water Hose


AIR & WATER HOSE

Construction: PVC air tool hose assembly includes brass NPT male fittings attached with crimped ferrules both ends. Available in red, blue or yellow cover.

Construction: Industrial air/water hose assembly includes brass NPT male fittings attached with crimped ferrules both ends. Red cover.

Construction: Oil resistant general purpose air/water hose assembly includes brass NPT male fittings attached with crimped ferrules both ends. Red cover.

Service: New low-temperature, extremely flexible and lightweight air and water hose assembly. Features an oil resistant tube and non-marking cover.

Construction: High grade, low temperature PVC compound tube and coverreinforcement with high strength spiral polyester. Flexible to -40°F. Available with yellow, red or blue cover.

ADD $2.00 PER LENGTH FOR PVC BEND RESTRICTORSPLEASE SPECIFY THREAD SIZE WHEN ORDERING

QUICK-DISCONNECT ADD-ON SEE PAGE 21





PLEASE SPECIFY THREAD SIZE WHEN ORDERING

(Series 1048A)

(Series 1010A)

(Series 1024A)

(Series 1044A)

I.D.W/P

@70ºFPrice/ 25 Ft

w/ Brass MalesPrice/ 50 Ft

w/ Brass MalesPrice/ 100 Ft w/ Brass Males

1/4” 300# $ 20.50 $ 33.00 $ 58.503/8” 300# 24.50 38.50 66.501/2” 300# 43.00 71.00 127.00

I.D.W/P

@70ºFPrice/ 25 Ft



1/4” 250# $ 28.75 $ 49.50 $ 90.753/8” 250# 37.50 64.50 118.501/2” 250# 49.50 83.50 152.00

Made in U.S.A.

Made in U.S.A.

Made in U.S.A.

Made in U.S.A.

I.D.W/P

@70ºFPrice/ 25 Ft



1/4” 300# $ 45.75 $ 83.50 $ 159.003/8” 300# 55.50 100.50 190.501/2” 300# 75.00 134.00 252.75

I.D.W/P

@70ºFPrice/ 25 Ft



1/4” 300# $ 32.50 $ 54.50 $ 98.503/8” 300# 39.75 67.50 121.50

PVC Air Tool Hose Assembly

Industrial Air/Water Hose Assembly

General Purpose Air/Water Hose Assembly

Low-Temperature Air/Water Hose Assembly


JACK HAMMER HOSE

Service: A quality hose for use with mobile air compressors to 150# working pressure.

Service: A heavy duty hose for the most demanding applications. Used with mobile air compressors to 150# working pressure.

Service: Designed for use with mobile air compressors where dust control is required. Assembly is rated to 150# working pressure.

Service: A quality lay-flat hose for use with mobile air compressors to 150# working pressure.

Construction: Black, oil mist resistant rubber tube, two braid equivalent of polyester spiral reinforcement. Abrasion and sunlight resistant EPDM rubber cover.

Construction: Oil-resistant rubber tube, multi-strand steel wire reinforcement, high-visibility bright yellow EPDM rubber cover.

Construction: Twin hose bonded one line red for air and one line blue for water supply. Black, oil mist resistant rubber tube and abrasion and sunlight resistant EPDM rubber cover.

Construction: Oil resistant Nitrile rubber tube with polyester reinforcement. Yellow abrasion and sunlight resistant ribbed cover.

ASSEMBLY INCLUDES UNIVERSAL COUPLINGS ATTACHED WITH FERRULES EACH END

ADD $6.50 PER LENGTH FOR 2-BOLT CLAMPS (Series 1025A)

(Series 1080)

(Series 1068)

RedI.D. Braid

W/P@70ºF

Price/Ft Bulk Hose

Price/ 50 FtAssembly

3/4” 2 300# $ 1.78 $ 97.501” 2 200# 3.02 179.50

YellowI.D. Braid

W/P@70ºF

Price/Ft Bulk Hose


3/4” 2 300# $ 1.86 $ 99.50

I.D. BraidW/P

@70ºFPrice/Ft

Bulk HosePrice/ 50 FtAssembly

3/4” 1-Wire 1200# $ 6.28 $ 333.50

I.D. BraidW/P

@70ºFPrice/Ft

Bulk HosePrice/ 50 FtAssembly

3/4” 1 225# $ 5.40 $ 292.50

BlueI.D. Braid

W/P@70ºF

Price/Ft Bulk Hose


3/4” 2 250# $ 2.42 $ 134.00

GreenI.D. Braid

W/P@70ºF

Price/Ft Bulk Hose


3/4” 2 300# $ 2.35 $ 129.00

Made in U.S.A.

Made in U.S.A.

Made in U.S.A.

(Series 1026)

ASSEMBLY INCLUDES UNIVERSAL COUPLINGS ATTACHED WITH BAND CLAMPS EACH END

ASSEMBLY INCLUDES UNIVERSAL COUPLINGS ATTACHED WITH FERRULES EACH END

WATER LINE INCLUDES 3/8” BRASS MALES ATTACHEDSEE PAGE 19 FOR SPRAY ATTACHMENT KIT – SERIES 1026K.

Red/BlueI.D.

W/P@70ºF

Price/ 10 FtWhip Assembly


3/4” 300 $67.50 $ 238.50

12

Pneumatic Tool Air Hose Assembly

Wire Braid Pneumatic Tool Air Hose Assembly

Lay-Flat Pneumatic Tool Air Hose Assembly

Twin Line Pneumatic Tool Air Hose Assembly


AIR & WATER HOSE

Service: A medium pressure, heavy duty hose for air, water and jetting applications. Temperature range -25°F to 185°F.

Service: Short hose assembly used as flexible connector between supply hose and tool.

Service: Recommended for air, water, or low pressure hydraulic service and many other industrial applications. Non-conductive.

Service: Heavy duty multi-purpose hose for applications requiring long life. Non-conductive. Temperature range -20°F to 190°F.

Construction: Oil mist resistant rubber tube, polyester cord reinforcement, high-visibility bright yellow rubber cover.

Construction: Red cover, oil mist resistant (Series 1010) or oil resistant (Series 1024) tube with 2-braid equivalent spiral polyester. Assembly includes Universal one end, long shank steel male thread other end attached with Band-It clamps.

Construction: Black Nitrile, oil resistant rubber tube, single ply of neutral-angle braided fiber. Neoprene oil resistant rubber cover. Available with black, green, blue, gray or red cover.

Construction: Highest quality oil resistant Nitrile tube, reinforced with a special spiral yarn. Fluorescent yellow carboxylated Nitrile/PVC abrasion resistant cover.

PLEASE SPECIFY THREAD SIZE WHEN ORDERINGADD $22.00 PER LENGTH FOR BENT STEM SWIVEL

LESS 15% - FULL REELS OF 500 FT

LESS 10% - FULL REELS OF 500 FT


(Series 1010A)(Series 1024A)

(Series 1910)

(Series 1034)

(Series 1070)

I.D. BraidW/P

@70ºFPrice/ 10 FtAssembly

Additive Per Foot

1/2” 2 300# $ 38.50 $ 1.88

I.D. BraidW/P

@70ºFPrice/ 10 FtAssembly

Additive Per Foot

1/2” 2 300# $ 46.00 $ 2.64

I.D. BraidW/P

@70ºF Price/FtBrass Male

Price/Ea1/4” 1 300# $ 1.88 $ 1.503/8” 1 300# 2.15 2.001/2” 1 300# 2.68 3.655/8” 1 300# 4.20 6.143/4” 1 300# 5.82 6.12

I.D. BraidW/P

@70ºF Price/Ft1/4” 2 500# $ 3.903/8” 2 500# 4.781/2” 2 500# 6.743/4” 2 500# 8.901” 2 500# 13.181¼” 2 500# 21.081½” 2 500# 24.152” 2 500# 25.36

I.D. BraidW/P

@70ºF Price/Ft3/4” 1 225# $ 3.601” 1 225# 4.101¼” 1 225# 6.301½” 1 225# 8.502” 1 225# 9.762½” 2 225# 14.123” 2 225# 16.50

Oil Mist Resistant (Series 1010 Hose)

Oil Resistant (Series 1024 Hose)

Made in U.S.A.

Made in U.S.A.

Made in U.S.A.

Hose Whip Assembly

300# Push-On Hose

500# Multi-Purpose Hose

Fabric Braid Air Hose


AIR & WATER HOSE

CLEANING EQUIPMENT HOSE

Service: Medium pressure, flexible hose for steam cleaning operations and saturated steam use to 325°F.

Service: Engineered for heavy duty applications. Features a steel wire braid reinforcement.

Service: For heavy duty applications. Suited for air hose for rough service using mobile air compressors.

Service: High pressure water hose assembly for use with pressure washers. Handles hot water up to 250°F.

Construction: Tube specially compounded for resistance to cleaning agents and detergents. Reinforced with braided steel wire. Black heat and oil resistant cover.

Construction: Nitrile rubber tube, multi-strand steel wire reinforcement, high-visibility bright yellow rubber cover. Resists cutting and gouging in rough service applications.

Construction: Assembly includes ground joint malleable iron couplings attached with 4-bolt clamps.

Construction: Black oil resistant tube and cover reinforced with steel wire. Assembly includes crimped on male pipe thread ends, swivel one end, and a bend restrictor on both ends. Also available in blue non-marking cover.



ASSEMBLY INCLUDES MALES ATTACHED BOTH ENDS

Made in U.S.A.

(Series 1080)

(Series 1080A)

(Series 1190)

(Series 1320)

I.D. BraidW/P

@70ºF Price/Ft3/4” 1-Wire 750# 6.281” 1-Wire 750# 10.501¼” 1-Wire 500# 16.201½” 1-Wire 500# 17.402” 1-Wire 500# 17.752½” 1-Wire 400# 35.743” 1-Wire 400# 40.404” 1-Wire 400# 64.26

I.D. BraidW/P

@70ºFPrice/ 50 Ft

w/ Male Cplgs

1/4” 1-Wire 3000# $ 127.503/8” 1-Wire 3000# 140.003/8” 2-Wire 4500# 189.00

I.D. BraidW/P

@70ºFPrice/ 50 Ft

w/ MxFPrice/ 50 Ft

w/ FxF

2” 2-Wire 500# $ 1107.00 $ 1160.003” 2-Wire 400# 2496.50 2652.50

I.D. BraidPrice/ 25 Ft

w/ Male CplgsPrice/ 50 Ft

w/ Male Cplgs3/8” 1-Wire $ 181.50 $ 319.501/2” 1-Wire 232.50 429.50

Made in U.S.A.

3:1 Design Factor

I.D. BraidW/P

@70ºFPrice/ 50 Ft

w/ Male Cplgs

3/8” 1-Wire 4000# $ 123.503/8” 2-Wire 5800# 177.50

14

Wire-Braid Air Hose

Wire-Braid “Bull Hose” Assembly

Pressure Washer Hose Assembly

Steam Cleaner Hose Assembly


SPECIAL PURPOSE HOSE

Service: For conducting sand, steel shot or other sharp abrasives at high velocity.

Service: Heavy duty plaster and grout, or cement discharge hose. Easy to handle and kink resistant.

Service: Designed for pumping dry sand and cement.

Service: Heavy duty all plastic hose for air, gases, dust, fumes and liquid by suction, gravity or pressure.

Service: Dual-line hose for oxygen & acetylene service. Meets RMA spec. Type VD, Grade R.

Construction: ¼” thick abrasion resistant static-conducting tube. Reinforced with spiral polyester cord. Black abrasion resistant rubber cover.

Construction: Black abrasion resistant SBR rubber tube, spiral plies of high-strength polyester. Cover is abrasion resistant and ozone resistant rubber. Couplings are internally expanded steel, Victaulic, California Style or IPT - Please specify.

Construction: Gum rubber tube reinforcement with a high tensile cord. Non-marking cover and an imbedded static wire. Couplings are internally expanded steel, Victaulic, California Style or IPT - Please specify.

Construction: Non-wire interlocking construction allows hose to be crush-resistant. Smooth, screw-on vinyl cuffs available.

Construction: One line red and one green bonded together for easy handling. Coupled with 9/16-18 females both ends.

AVAILABLE IN 25, 50 OR 100 FT LENGTHS ONLY

AVAILABLE IN 50 FT LENGTHS ONLY

AVAILABLE IN 50 FT LENGTHS ONLY

MAXIMUM LENGTH - 50 FT

(Series 1660)

(Series 1670)

(Series 1675)

(Series 1810)

(Series 2050A)

Size Ply O.D.W/P

@70ºF Price/Ft1/2” 2-Ply 1.130 150# $ 4.383/4” 4-Ply 1.500 150# 6.801” 4-Ply 1.875 150# 7.681¼” 4-Ply 2.156 150# 8.801½” 4-Ply 2.375 150# 10.462” 4-Ply 2.875 150# 15.65

I.D. PlyW/P

@70ºF Price/FtCouplingsPrice/Pr

1” 2-Ply 1230# $ 12.58 $ 178.501¼” 2-Ply 1230# 13.40 171.001½” 4-Ply 1230# 17.60 184.502” 4-Ply 1230# 19.80 185.502½” 4-Ply 1230# 28.32 254.003” 4-Ply 1230# 38.50 295.004” 4-Ply 1230# 51.25 457.50

I.D. PlyW/P

@70ºF Price/FtCouplingsPrice/Pr

1½” 4-Ply 150# $ 17.85 $ 183.502” 4-Ply 150# 22.50 184.50

I.D. BraidW/P

@70ºFPrice/ 25 Ft

w/ CplgsPrice/ 50 Ft

w/ Cplgs1/4” 1 200# $ 58.50 $ 100.50

I.D.Maximum Vacuum Price/Ft Price/Cuff

1¼” 29” $ 3.48 $ 4.001½” 29” 4.25 5.002” 20” 5.60 8.00

Made in U.S.A.

Made in U.S.A.

Made in U.S.A.

2:1 Design Factor

Sand Blast Hose

Plaster & Grout Hose

Gunite Hose

Plastic Vacuum Hose

Twin Welding Hose Assembly



Made in U.S.A.

Made in U.S.A.

Service: Flexible, heavy duty, high pressure hose for handling L.P. gas up to 50# working pressure. U.L. listed. Can also be used for low pressure natural gas up to 1# working pressure. Not for use in confined work areas.Temperature range -20°F to 190°F.

Service: Used with portable blowers and heaters, ventilation and fume removal equipment. Temperature range -20°F to 180°F.

Service: Lightweight and flexible static conductive hose for airless paint spray. Temperature range 0° to 200°F.

Service: Low pressure hose designed for use with portable heaters using natural gas up to 1# working pressure. Not for use in confined work areas. Temperature range -40°F to 200°F.

Construction: Smooth, permeation resistant Nitrile tube, braided synthetic reinforcement. Black oil resistant synthetic cover.

Construction: Expanded wire pitch for excellent compressibility and minimum storage. Yellow PVC impregnated polyester with a black wear strip. Custom lengths available.

Construction: Nylon tube, chemical and solvent resistant. Polyester reinforcement and Polyurethane cover. Dissipates static charge.

Construction: Black Nitrile tube reinforced with spiral polyester. High visibility red corrugated Hypalon® cover.

ADD $90.00 PER LENGTH FOR ATTACHED STORAGE BAG ONE END

ASSEMBLY INCLUDES NPSH SWIVEL FEMALES AND SPRING GUARDS BOTH ENDS

LESS 10% - FULL REELS OF 500/600 FT

LESS 10% - FULL REELS OF 500/600 FT

(Series 2582)

(Series 2015)

(Series 2024)

(Series 2020)

I.D. BraidW/P

@70ºF Price/Ft1/4” 1 350# $ 3.043/8” 1 350# 3.081/2” 1 350# 4.123/4” 2 350# 9.141” 2 350# 9.30

Made in U.S.A.

Made in U.S.A.

I.D.Price/ 15 Ft

Belt & BucklePrice/ 25 Ft

Belt & Buckle8” $ 161.50 $ 250.0010” 250.00 396.5012” 341.00 503.50

I.D.W/P

@70ºFPrice/ 25 Ft w/ Cplgs

Price/ 50 Ft w/ Cplgs

1/4” 3300# $ 64.00 $ 90.00

I.D. Braid Price/FtPrice/ 25 Ft

w/ MxF1/2 ” 2 $ 5.90 $ 163.25

Service: Water and slurry transfer hose for applications of rugged terrain or where strength and abrasion resistance for the tube or cover is essential. Blue NSF 61 grade can be used for potable water applications. Flexible at temperatures to -58° F.

Construction: High abrasion resistant extruded thermoplastic polyurethane reinforced with high strength circular woven filament polyester yarn. Cover is black. Blue cover for NSF 61 grade.

LESS 10% FULL COILS OF 650 FT. (Series 1159)(Series 1169)

I.D.W/P

@70ºF

(1169)Black

Price/ Ft

(1159)Blue

Price/ Ft1” 250# $ 7.10 $ 7.601½” 200# 7.90 8.752” 200# 9.90 10.502½” 200# 11.32 12.503” 200# 15.30 16.254” 175# 21.00 23.406” 150# 35.50 38.65

16

Ventilation & Blower Hose

Airless Paint Spray Hose Assembly

Natural Gas Portable Heater Hose

LPG Butane-Propane Hose

Urethane Water & Slurry Transfer Hose



(3 & 4” ID)Made in Canada

Service: Designed to handle high temperature asphalt, tar, oil and other unrefined petroleum products. Maximum working temperature 350°F.

Service: Used for hot air to 300°F under pressure between the air compressor and dry bulk tank.

Service: For pneumatic transfer of cement or dry powder under low pressure and for use with abrasive slurries.

Service: Extreme high pressure, high performance water blast hose to handle water on high pressure equipment

Service: Designed for open end cement and abrasives by gravity flow.

Construction: Special high temperature tube reinforced with a dual wire helix. Black petroleum, abrasion, heat and ozone resistant cover.

Construction: Black EPDM, heat resistant tube, polyester cord and steel wire helix reinforcement. Black EPDM cover with yellow stripe.

Construction: Black abrasion resistant and static conducting natural rubber tube with polyester cord reinforcement. Black wear and weather resistant cover. Maximum length - 100 ft.

Construction: Seamless synthetic water and oil resistant tube reinforced with layers of 2 braid equivalent of spiral wire. Black oil, abrasion and weather resistant cover.

Construction: Tan pure gum tube. Reinforced with polyester. Black natural rubber/SBR cover.

LESS 10% - FULL COILS OF 100 FT.

1” APPLICATOR HOSE AVAILABLE IN 25 OR 50 FT. LENGTHS ONLY

AVAILABLE IN 20 FT. MULTIPLES ONLY

AVAILABLE IN 50 FT. ASSEMBLIES ONLY

(Series 1780)

(Series 1740)

(Series 1750)

(Series 1998)

(Series 1755)

I.D. PlyW/P

@70ºF Price/Ft11⁄2” 4 150# $ 28.122” 4 150# 34.583” 4 150# 46.624” 4 150# 58.32

I.D. BraidW/P

@70ºF Price/Ft1” 2W 300# $ 22.50

Made in U.S.A.

I.D. PlyW/P

@70ºF Price/ Ft

2” 2 150# $ 17.403” 2 150# 28.404” 2 150# 40.78

I.D. Ply TubeW/P

@70ºF Price/ Ft

4” 2 3⁄16” 75# $ 20.404” 2 1⁄4” 75# 27.40

4½” 2 1⁄4” 75# 38.625” 2 1⁄4” 75# 40.68

I.D. BraidW/P

@70ºFPrice/ 50 Ft

w/ MxM1/4” 2W 14,000# $ 505.003/8” 2W 12,000# 485.001/2” 2W 12,000# 495.003/4” 2W 10,000# 1095.001” 2W 10,000# 1155.00

I.D. Ply TubeW/P

@70ºF Price/ Ft

8” 2 1⁄8” 50# $ 67.5010” 2 1⁄8” 50# 96.4212” 2 1⁄8” 50# 102.8614” 2 1⁄8” 50# 138.2816” 2 1⁄8” 50# 160.75

2.5:1 Design Factor

LESS 15% - FULL COILS OF 50 FT.

Hot Tar & Asphalt Hose

Hot Air Blower Hose

Dry Materials/Cement Discharge Hose

High Pressure Water Blast Hose

Elephant Trunk Hose


COUPLINGS & ACCESSORIES

Round Square

(Series SRHS) (Series SSHS) (Series SSKS-TH)

(Series SSKS-BH)(Series SRHS-LN)

(Series SFV)

Size Price/Each

1½” $ 22.502” 26.503” 40.50

Size Price/Each

1½” $ 13.002” 16.502½” 23.503” 23.504” 26.006” 64.008” 210.00

Size Price/EachFlapper

Valve Assembly

1½” $ 24.25 $ 14.802” 35.75 17.802½” 48.50 22.303” 60.50 23.804” 105.50 35.006” 249.50 85.908” 525.00 187.80

Size Price/Each

1½” $ 38.752” 38.753” 74.50

Size Price/Each

1½” $ 38.752” 38.753” 74.50

Aluminum with Brass Swivel Female

+ADD $11.00/SET FOR NST THREAD +ADD $1.25/EACH FOR NST THREADPLATED MALLEABLE IRON

(Series SU) (Series SW) (Series SRW)

Size Complete Set Female Only Male Only

1¼” $ 36.00 $ 24.00 $ 18.001½” 8.50+ 5.65 4.252” 12.50 8.25 6.252½” 27.50+ 18.25 13.753” 26.50 17.50 13.254” 43.00 28.50 21.506” 108.00 72.00 54.008” 802.00 537.50 401.00

Size Price/Each

1½” $ 4.502” 5.252½” 6.003” 9.754” 12.506” 84.85

Size Price/Each

1¼” $ .451½” .55+

2” .702½” 90+

3” .904” 1.506” 4.458” 9.80

ALSO AVAILABLE IN STAINLESS STEEL, BRASS, POLYPROPYLENE, AND NYLON

(Series Q)

SizePart ‘A’

Female AdapterPart ‘B’

Male Coupler

Part ‘C’Hose Shank

CouplerPart ‘D’

Female Coupler

Part ‘E’Hose Shank Adapter

Part ‘F’ Male Adapter

Part ‘DC’Dust Cap

Part ‘DP’Dust Plug

RubberGaskets

1¼” $ 5.70 $ 11.72 $ 12.54 $ 13.05 $ 6.58 $ 8.16 $ 13.30 $ 5.24 $ 1.201½” 4.50 10.92 11.32 12.06 5.55 5.85 10.12 3.98 1.352” 5.45 13.00 13.06 13.96 7.34 7.58 11.58 5.00 1.202½” 9.82 20.80 19.25 22.08 12.06 13.88 16.34 9.88 1.503” 12.85 21.98 21.98 22.56 14.25 14.46 19.24 8.60 1.554” 16.08 28.68 34.84 32.64 21.82 23.42 24.70 14.12 2.056” 34.46 66.98 78.58 73.58 55.12 50.45 62.18 31.40 5.158” 150.10 313.60 311.88 275.00 173.85 219.52 227.32 148.98 22.50

18

Long Narrow Strainers

Steel Strainers Top HoleSkimmer Strainers

Bottom HoleSkimmer Strainers

Iron Foot Valvew/ Strainer

Suction Hose Couplings Spanner Wrenches Rubber Washers

Quick Couplings - Aluminum



(Series UG)(Series UH) (Series UF) (Series UM) (Series UC)

(Series UWT)

(Series UPL)(Series UX)

(Series UW)

(Series UWS)

(Series 1026K)

(Series UY)

(Series UDY)

Price/Each

2-Lug $ .604-Lug 4.40

Price/Each

$ 9.30

Price/Each

$ 59.75

Price/Each

$ 168.00

SizeHose EndPrice/Each

Female EndPrice/Each

Male EndPrice/Each

2/4-Bolt ClampPrice/Each

1/4” $ ------ $ 4.50 $ 4.50 $ ------3/8” 3.65 4.50 4.50 8.501/2” 3.65 4.50 4.50 3.505/8” 11.15 ------ ------ ------3/4” 4.00 4.50 4.50 4.751” 5.25 5.25 5.25 5.851¼” 13.50 12.30 ------ 29.501½” 15.00 13.50 ------ 37.902” 18.00 14.50 ------ 38.60

2-LUG CONNECTION SIZES 1/4” TO 1” - 4-LUG SIZES 1¼” TO 2”

1” FNPT X TWO 3/4” MPT CONNECTS A SINGLESUPPLY TO A DUAL OUTLET

LUBRICATOR KITS WITH HOSE WHIPS AVAILABLE - SEE PAGE 12 PLEASE SPECIFY REQUIRED SCFM RATING

FOR USE WITH SERIES 1026 TWIN LINE PNEUMATIC TOOL AIR HOSE ASSEMBLY – PAGE 12.

USE FOR EFFECTIVE SILICA DUST CONTROL.

1” FEMALE INLET x (2) 3/4” FEMALE OUTLET

2-LUG GASKETS SOLD IN BAGS OF 50 PCS.

Size Oil Capacity Price/Each

1/2” 1.4 oz $ 65.003/4” 3.7 oz 78.503/4” 11.0 oz 94.001” 16.0 oz 154.50

Hose I.D. Length Price/Each

½” - 1¼” 20¼” $ 17.751½” - 3” 38” 26.504” 44” 64.50


½” - 1¼” 20¼” $ 17.501½” - 3” 38” 26.004” 44” 64.40

Size Price/Each

3/4” $ 89.751” 101.501¼” 209.751½” 352.002” 480.003” 2040.00

Price/Each

$ 192.50

Hose to Hose Service

Hose to Tool Service

Kit Includes:• Couplings• Connections• Jumper Water Hose• Water Valve • Water Spray Nozzle • Thread Tape• Straps • Instructions

Universal Hose Couplings Universal Gaskets

Three-Way Connection

In-Line Lubricators Excess AirFlow Valves

Safety Whip-Check Cables Twin Line Hose Spray Kit

Compressor “Y”

Dual “Y” Valve



(Series M)

(Series UL)

(Series ULA)

(Series M)

(Series FBL)

(Series US)

(Series A)

(Series KQD)

(Series MC)

(Series MCL)

Price/Each

$ 10.00

Thread/Barb 1/4” Body Size 3/8” Body Size

Female Coupler1/4” $ 8.00 $ 17.503/8” 10.75 17.50

Male Coupler1/4” 8.00 17.503/8” 10.75 17.50

Hose Shank Coupler1/4” 10.75 24.503/8” 11.50 19.75

Female Plug1/4” 2.00 3.253/8” 5.45 3.25

Male Plug1/4” 1.80 3.803/8” 3.80 3.80

Hose Shank Plug1/4” 3.50 6.553/8” 4.50 5.00

SizePriceEach

Female Coupler 1/4” $ 7.00Female Coupler 3/8” 8.75

Male Coupler 1/4” 7.00Male Coupler 3/8” 8.75

Female Plug 1/4” 2.25Female Plug 3/8” 3.75

Male Plug 1/4” 2.25Male Plug 3/8” 3.75

RATED TO 300 PSI

SPECIFY HOSE O.D. WHEN ORDERINGOTHER SIZES AVAILABLE

RATED TO 3500 PSI

Industrial Interchange For 1/4” Thread

SET INCLUDES FEMALE COUPLER AND MALE QUICK-DISCONNECT PLUG

ADD PER YOUR REQUIREMENTSTO HOSE ASSEMBLY PRICE

Crimps 1/4” thru 3/8” I.D. HoseDIES INCLUDED Price/Each $ 268.50

Crimps 1/2” thru 1” I.D. HoseDIES OPTIONAL Price/Each $ 297.00


1/4” 3/4” $ .385/16” 1” .463/8” 1” .541/2” 1” .685/8” 1” 1.203/4” 1” 1.751” 1” 1.90

Hose I.D.

ThreadNPT

MalePrice/Each

FemalePrice/Each

1/4” 1/4” $ 1.40 $ 1.755/16” 1/4” 1.65 1.953/8” 1/4” 1.60 1.853/8” 3/8” 2.00 2.501/2” 3/8” 2.30 2.581/2” 1/2” 3.65 3.903/4” 3/4” 4.95 5.201” 1” 10.75 ------

Size Price/Each

Pint $ 15.50Gallon 66.50

Body Size Price/Each

1/4” $ 11.503/8” 20.75

Size Price/Each

Pint $ 25.00Gallon 150.00

USE TO -40°F

3/8” Male NPT x 7/8-24 ThreadPrice/Each $ 28.50

3/8” Female NPT x 7/8-24 ThreadPrice/Each 28.50

1/2” Hose Shank x 7/8-24 ThreadPrice/Each 27.00

1/2” Hose Shank x 1/2” NPT ThreadPrice/Each 27.00

Straight-Thru Style Couplings

20

Quick-Disconnect Set

Quick-Disconnect SetAdd-On

Anti-Freeze Lubricant

Air Tool Lubricant

Industrial Quick-Disconnect Couplings

Brass Fittings

Pressure Washer Quick-Disconnects

Brass Ferrules

Bent Stem Swivels

Crimping Tools



INCLUDES SWIVEL FITTINGS BOTH ENDSWORKING PRESSURE - 125 PSI

INCLUDES SWIVEL FITTING ONE ENDWORKING PRESSURE - 200 PSI

(Series MP) (Series MR) (Series AHB)

(Series AH)(Series M)

Serrated Shank thru 8"(Series SWL)

I.D. Male Length Price/Each

1/4” 1/4” 10 Ft $ 39.901/4” 1/4” 20 Ft 53.251/4” 1/4” 30 Ft 76.503/8” 3/8” 20 Ft 101.503/8” 3/8” 30 Ft 138.25

I.D. Male Length Price/Each

1/4” 1/4” 12 Ft $ 32.001/4” 1/4” 25 Ft 47.253/8” 3/8” 25 Ft 80.003/8” 3/8” 50 Ft 137.701/2” 1/2” 25 Ft 158.401/2” 1/2” 50 Ft 241.20

Size Price/Each

1/8” $ 2.531/4” 2.813/8” 4.091/2” 5.703/4” 7.50

SizeNPT Price/Each

1/4” $ 18.503/8” 20.00

SizeMale w/

Hose ShankFemale w/

Hose ShankMale w/

Male NPTFemale w/Male NPT

Male w/ 150#ASA Flange

Female w/ 150#ASA Flange

RubberGaskets

2” $ 89.68 $ 73.90 $ 60.50 $ 40.50 $ ------ $ ------ $ 4.253” 143.00 112.00 89.00 51.50 ------ ------ 5.954” 158.22 113.50 146.95 83.25 228.00 152.00 9.006” 309.70 212.62 270.50 142.50 403.50 262.50 20.208” 452.00 354.08 525.00 293.00 735.25 453.60 35.0010” 860.50 376.75 376.75 ------ 1335.00 804.70 58.5012” 1054.00 483.70 483.70 ------ 1646.20 1040.25 66.50

(Series MTS) (Series MLS)

Price/Each

$ 4.90

1/4” Thread1/4” Thread

Aluminum FemaleNPT

MaleNPT Price/Each

1/4” 1/4” $ 10.503/8” 3/8” 22.751/2” 1/2” 74.103/4” 3/4” 75.60

FemaleNPT

MaleNPT Price/Each

1/4” 3/8” $ 2.731/4” 1/2” 4.273/8” 1/2” 3.613/8” 3/4” 6.951/2” 3/4” 7.201/2” 1” 14.083/4” 1” 11.60

Size Male NPT Price/Each

1/4” 1/4” $ 21.153/8” 1/4” 15.40

RATED TO 150 PSIRATED TO 150 PSIRATED TO 150 PSI

(Series MBS)

(Series MB)

Price/Each

$ 19.75

Ball & Socket Couplings - Type B

Polyurethane Recoil Air Hose Assembly

Nylon Recoil Air Hose Assembly

Brass Hex Reducer Bushing

Brass Hex NipplesFemale Air Chuck

Air Tool SwivelBall Swivel

Safety Blow Gun

Brass In-Line Swivel



(Series GJ)

(Series CN)(Series CM) (Series A)

(Series CS)

(Series O) (Series AF) (Series PFL)

Size Price/Each

1¼” $ 4.901½” 5.752” 6.852½” 12.153” 13.404” 21.056” 60.908” 165.00

10” 267.5012” 420.00

Size Price/Each

1/2” 2.445/8” 2.743/4” 2.901” 3.261¼” 4.701½” 6.242” 7.702½” 12.223” 17.004” 26.446” 76.18

ThreadSize Price/Each

1” $ 8.861¼” 13.201½” 14.202” 27.962½” 32.463” 41.064” 63.646” 91.728” 147.06

Size Price/Each

1/4” $ 2.043/8” 2.401/2” 3.363/4” 5.601” 10.50


1” $ 3.501¼” 4.401½” 5.502” 7.45

SizeFemale EndPrice/Each

Male EndPrice/Each

SplicerPrice/Each

2/4-Bolt ClampPrice/Each

Female Spud OnlyPrice/Each

Male Spud OnlyPrice/Each

Double SpudPrice/Each

3/8” $ 42.65 $ 6.55 $ ------ $ 8.75 $ 21.95 $ 20.00 $ ------1/2” 33.54 6.78 10.40 8.15 18.25 22.90 36.503/4” 40.95 10.38 18.60 10.25 15.90 21.70 35.401” 42.25 15.20 29.80 20.35 16.50 22.90 35.401¼” 79.55 24.00 22.20 29.50 36.20 51.85 61.501½” 76.70 28.15 21.35 37.90 34.25 50.00 61.502” 94.45 39.00 37.35 39.40 37.10 54.00 66.252½” 215.50 66.60 67.00 53.30 89.85 128.10 131.353” 246.40 90.50 78.80 67.25 97.10 134.70 137.704” 500.00 153.00 ------ 224.00 171.40 ------ ------

Price/Each

$ 35.00

Plated SteelPlated Steel

ALSO AVAILABLE IN STEEL, BRASS, ALUMINUM, NYLON, POLYPROPYLENE,

AND STAINLESS STEEL

KIT INCLUDES 382 70 DUROMETERBUNA-N O-RINGS, 30 DIFFERENT SIZES

FROM SIZE -006 TO SIZE -327.SUPPLIED IN A RED ABS CASE. ADD $59.50 FOR AUTO DRAIN

Heavy Duty Metal Bowl Carbon Steel

FOR USE WITH WIRE-BRAID AIR HOSE - SERIES 1080

Size CFM Price/Each

3/4” 250 $ 328.001” 325 328.001½” 1280 1238.502” 1400 1238.50

22

CombinationHose Nipples

Steel Hose Menders Brass Menders

Steel Close Nipples

O-Ring Kit Airline Filters 150# Steel Flanges

Ground Joint Type Couplings



(Series VFBV) (Series HP)(Series A)

(Series EQ) (Series EHE)

(Series JBHA) (Series JAHN) (Series JAHN)

(Series ESBG)

Size Price/Each

1/2” $ 13.003/4” 16.101” 17.951¼” 31.201½” 35.35

Size Price/Each

1/2” $ 16.753/4” 14.751” 16.801¼” 22.101½” 29.25

Size Price/Each

2½” NST x GHT $ 29.502½” NST x 1” IPT 29.502½” NST x 1½” IPT 29.502½” NST x 2” IPT 45.504½” NST x 2½” NST 175.00

Size Rating Price/EachSafety Vented

Price/Each

1/4” 365# $ 6.75 $ 47.003/8” 365# 6.75 47.001/2” 600# 10.50 47.003/4” 550# 14.00 68.001” 550# 24.50 87.501¼” 300# 37.50 138.501½” 300# 53.00 170.002” 300# 80.00 206.50

Size Price/Each

3/4” $ 3.251” 4.251¼” 5.001½” 5.252” 5.752½” 7.803” 8.004” 9.556” 14.708” 16.25

Stainless Steel w/ Plated Screw

AluminumAluminum

ALSO AVAILABLE IN STAINLESS ORCARBON STEEL

WE ALSO CARRY A COMPLETE LINE OF ALUMINUM AND BRASS ADAPTERS

PLEASE SPECIFY HOSEO.D. WHEN ORDERING

Size Type Price/Each

1½” IPT Lexan $ 23.501½” NST Lexan 23.502” IPT Lexan 47.50

1½” IPT Brass 67.501½” NST Brass 67.50

Hose I.D. Thread Price/Each

3/8” GHT $ 8.501/2” GHT 8.505/8” GHT 8.503/4” GHT 8.501” NPSM 18.50

Price/Each

$ 38.75

Price/Each

$ 1.20

Price/Each

3/4” x 6” GHT $ 37.98

Price/Each

Safety Clip $ .30Safety Lanyard .40

Size Price/Each

3/4” $ .121” .45

(Series JAHW)

(Series ESC)

(Series RW)

Sand BlastCouplings

Brass Hydrant Adapters

AdjustableHose Nozzles

Brass AdjustableGarden Hose Nozzle

Sand Blast Hose Gaskets

Water Hose Couplings

Water Hose Washers

AdjustableHydrant Wrench

Hose Safety Clips

Sand BlastNozzle Holder

Brass Valves Heavy Duty T-Bolt Clamps


PIPE FITTINGS

(Series JFM) (Series JMM)

(Series P64-6)

(Series P64-10)

(Series P64-65)(Series P64-4 ) (Series P64-2 ) (Series P64-5)


1/4” $ 3.203/8” 3.301/2” 2.173/4” 3.371” 3.081-1/2” 7.012” 8.68

FemaleSize Price/Each

1/4” $ 3.773/8” 3.771/2” 2.993/4” 3.491” 5.741-1/2” 9.022” 13.14

FemaleNPT Price/Each

1/4” $ 3.253/8” 3.071/2” 1.983/4” 2.641” 4.421-1/2” 9.802” 14.88


1/4” $ 4.003/8” 4.221/2” 2.513/4” 4.391” 6.501-1/2” 14.082” 23.51

Size Price/Each

3/4” GHT x 1” NPT $ 21.501” NPT x 3/4” GHT 22.00

1-1/2” NPT x 1-1/2” NPSH 21.652-1/2” NPT x 2-1/2” NPSH 47.351-1/2” NPT x 1-1/2” NST 21.652-1/2” NPT x 2-1/2” NST 47.35

3” NPT x 2-1/2” NST 93.601” NPSH x 3/4” GHT 22.15

1-1/2” NPSH x 1-1/2” NPT 21.651-1/2” NPSH x 1-1/2” NST 21.652-1/2” NPSH x 2-1/2” NST 70.001-1/2” NST x 1-1/2” NPT 21.65

1-1/2” NST x 1-1/2” NPSH 21.652-1/2” NST x 2” NPT 74.45

2-1/2” NST x 2-1/2” NPT 47.352-1/2” NST x 3” NPT 85.05

2-1/2” NST x 2-1/2” NPSH 76.60

Size Price/Each

1” NPT x 3/4” GHT $ 19.751” NPT x 1” NPSH 19.75

1-1/2” NPT x 1-1/2” NPSH 22.652” NPT x 2” NPSH 63.00

2-1/2” NPT x 2-1/2” NPSH 46.501” NPT x 1” NST 19.75

1-1/2” NPT x 1-1/2” NST 22.652” NPT x 2-1/2” NST 61.75

2-1/2” NPT x 2-1/2” NST 44.253” NPT x 2-1/2” NST 96.60

1-1/2” NST x 1-1/2” NST 22.601-1/2” NST x 1-1/2” NPSH 23.65

150# Galvanized150# Galvanized150# Galvanized

150# Galvanized

Brass Brass

150# Galvanized

150# Galvanized

Size Price/Each

1/4” $ 4.263/8” 4.421/2” 4.333/4” 4.181” 5.691-1/2” 12.552” 19.82


3/8” $ 9.711/2” 9.243/4” 10.141” 12.671-1/2” 24.242” 31.42

(Series P64-16)

Male NPT

Female NPT Price/Each

3/8” 1/4” $ 6.251/2” 1/4” 6.251/2” 3/8” 4.843/4” 1/2” 4.511” 1/2” 4.881” 3/4” 4.34

1-1/2” 3/4” 9.101-1/2” 1” 8.17

2” 1-1/2” 8.48

150# Galvanized

24

Square Head Plug

90° Elbow

Union

90° Street Elbow

Female Tee

Female to Male Hex Nipple Male to Male Hex Nipple

Reducer BushingThreaded Coupling


HOSE CLAMPING SYSTEMS

Heavy Duty Locking Tool

Band-It Tool

Intermediate Locking Tool

Band-It Adapter(Series BJ)

(Series BCP)

(Series BC)

(Series BCP)

(Series 8100)

(Series BC)

High Carbon Coated Steel Also Available in Stainless Steel

Galvanized Carbon Steel Also Available in Stainless Steel

Imported

Part No. Clamp I.D. Band Width Price/Each

BJS-301 7/8” 3/8” $ .95BJS-302 1⅜” 3/8” 1.04BJS-303 1” 1/2” 1.32BJS-304 1¼” 1/2” 1.45BJS-305 1½” 5/8” 1.72BJS-306 1¾” 5/8” 1.90BJS-307 2” 5/8” 2.08BJS-308 2¼” 5/8” 2.22BJS-309 2½” 5/8” 2.38BJS-310 2¾” 3/4” 2.86BJS-311 3” 3/4” 3.02BJS-312 3½” 3/4” 3.25BJS-313 4” 3/4” 3.76BJS-314 4½” 3/4” 3.98BJS-315 5” 3/4” 4.34BJS-318 7” 3/4” 5.92

Part No. Clamp I.D. Band Width Price/Each

BCP-1 1” 3/8” $ 1.00BCP-2 1⅜” 3/8” 1.10BCP-3 2” 3/8” 1.10BCP-4 1” 5/8” 1.15BCP-5 1¼” 5/8” 1.15BCP-6 1½” 5/8” 1.30BCP-7 1¾” 5/8” 1.35BCP-8 2” 5/8” 1.40BCP-9 2¼” 5/8” 1.45BCP-10 2½” 5/8” 1.70BCP-11 2¾” 5/8” 1.75BCP-12 3” 5/8” 1.85BCP-14 3½” 5/8” 2.00BCP-16 4” 5/8” 2.30BCP-18 4½” 5/8” 2.50BCP-20 5” 5/8” 2.55BCP-26 6½” 5/8” 3.00BCP-28 7” 5/8” 3.50

BAND-IT ADAPTER REQUIRED FOR USE WITH PREFORMED CLAMPS

FOR 5/8” WIDE CENTER PUNCH CLAMPS

Price/Each

$ 225.00Price/Each

$ 205.00

Price/Each

$144.50

Price/Each

$ 91.75

Size Span Range Price/Each

5” 10”- 15” $ 2.2010” 15”- 20” 2.2515” 20”- 30” 2.65

Size Span Range Price/Each

21” 30”- 40” $ 2.8031” 40”- 55” 3.5041” 50”- 60” 5.25

WidthBand

Price/100 Ft BoxBuckles

Price/100 Pc Box

3/8” $ 130.00 $ 90.001/2” 176.00 121.505/8” 213.00 152.003/4” 262.50 183.50

Price/Each

$ 145.00

(Series BCP)

Band-It Tools

Stainless Steel Band-It Band & Buckles

Band-It Clamps - Preformed

Center Punch Clamps - Preformed Center Punch Tools

Center Punch Mallet

Rubber Tie-Down Straps


HYDRAULIC HOSE ASSEMBLIES

Service: Low pressure hydraulic return line or petroleum suction.

Construction: Oil resistant tube and cover with textile reinforcement and wire helix for suction. Includes rigid male pipe thread both ends.

LESS 10% - BULK PACKAGE (Series 1920A)

I.D. Ply W/PPrice/ 1 FtAssembly

AdditivePer Ft

3/4” 2-Ply 300# $ 42.92 $ 11.541” 2-Ply 250# 56.74 11.841¼” 2-Ply 200# 118.98 12.321½” 2-Ply 150# 199.56 14.562” 2-Ply 100# 299.24 18.10

Service: High temperature, medium pressure hose for applications including oil lines, transmission coolant and filtration lines Construction: Black CPE tube, wire and textile braid, and blue impregnated textile braid cover.

LESS 10% - BULK PACKAGE (Series 1934)

Made in U.S.A.

SAESize Braid W/P Price/Ft

ReusableNPT Male

Reusable JIC Female

-4 1-Wire 2000# $ 7.75 $ 12.28 $ 11.87-5 1-Wire 1500# 8.02 19.55 16.62-6 1-Wire 1500# 8.86 14.05 17.22-8 1-Wire 1250# 9.55 23.27 19.92-10 1-Wire 1000# 11.08 28.71 29.84-12 1-Wire 750# 13.02 36.37 40.93

Service: Extreme High pressure hydraulic hose assembly for all types of equipment uses.

Construction: Oil resistant tube and cover with four spirals of high tensile steel wire. Includes rigid male pipe thread both ends.

LESS 10% - BULK PACKAGE(Series 1992A)

I.D. Spiral W/PPrice/ 1 FtAssembly

AdditivePer Ft

1/2” 4 4000# $ 31.64 $ 11.423/4” 4 4000# 52.06 16.041” 4 4000# 75.60 19.621¼” 4 3000# 150.02 27.241½” 4 2500# 217.66 33.642” 4 2500# 327.20 47.62

Service: High pressure hydraulic hose assembly for all types of equipment uses. Features the bend radius of 1-wire braid hose.

Construction: Oil resistant tube and cover with two braids of high tensile steel wire. Includes rigid male pipe thread both ends.


Made in U.S.A.

I.D. Braid W/PPrice/ 1 FtAssembly

AdditivePer Ft

1/4” 2-Wire 5800# $ 22.18 $ 3.943/8” 2-Wire 5000# 25.72 4.701/2” 2-Wire 4500# 29.34 5.203/4” 2-Wire 3500# 51.18 10.461” 2-Wire 2700# 84.24 13.34

Service: Medium/high pressure hydraulic hose assembly for all types of equipment uses.

Construction: Oil resistant tube and cover with one braid of high tensile steel wire. Includes rigid male pipe thread both ends.


I.D. Braid W/PPrice/ 1 FtAssembly

AdditivePer Ft

1/4” 1-Wire 3270# $ 21.20 $ 2.903/8” 1-Wire 2615# 24.16 3.001/2” 1-Wire 2320# 27.72 3.56

Made in U.S.A.

Made in Canada

26

SAE 100R4 • Hydraulic Suction Hose Assembly

Universal Truck/Fleet/Multi-Purpose Hose

SAE 100R12 • Four Spiral Hose Assembly

SAE 100R16 • Two Wire Braid Hose Assembly

SAE 100R1AT/1SN • One Wire Braid Hose Assembly


HYDRAULIC HOSE ACCESSORIES

(Series KPC)

(Series KQD-H)

(Series O) (Series KGT)

(Series KHP)(Series K5)

(Series KQD-FF)

SizeWorking Pressure

CouplerPrice/Each

PlugPrice/Each

3/8” 4375# $ 65.00 $ 27.551/2” 4250# 78.75 44.303/4” 3650# 172.00 78.401” 3650# 246.10 152.60

Size I.D. Price/Ft

.79 $ 1.65

.98 1.901.06 1.951.22 2.051.42 2.301.57 2.501.73 2.652.17 3.55

SizeWorkingPressure

CouplerPrice/Each

PlugPrice/Each

1/4” 5000# $ 19.70 $ 9.303/8” 4000# 24.60 11.201/2” 4000# 31.00 12.203/4” 4000# 49.95 24.101” 4000# 82.52 34.45

Price/Each

$ 177.50

Price/Each

$ 58.50Price/Each

$ 178.50

INCLUDES DIE SETS

SOLD IN 100 FT LENGTHS ONLY

• 60 ton cylinder • Common base for bench mounting.• Includes 5 die-sets to crimp thru 3/4” size.• Two-piece “slide-in” die design for easy installation.• Adjustable coupling stop for accurate, repetitive positioning of

assemblies in dies.• Color coded die sets make selection easy.• Removable pusher and spring-loaded die set for easy loading.• Crimps through 1-1/4” I.D. 2-wire and 4-wire hose with all

coupling styles including most bent tubes. • 1HP, 110V AC Single Phase, 50-60 Hz, Electric Pump.• 11” Wide x 22” Deep x 19” High. • 125 lbs. with Pump.

• 4 in 1 O-Ring Kit• Handy Carrying Case• 90 Durometer Nitrile• Flat Face• SAE Flange• Boss• Tube Fittings

• High Pressure Thread Sealant• 1.69 Fluid Oz. Bottle

• All Purpose #32 Hydraulic Oil• 5 Gallon Pail

Price/Each

$ 9,995.00

FF-Coupler

Black Nylon

H-Coupler FF-PlugH-Plug

Hydraulic O-Ring Kit Protective Hose Sleeving

Thread SealantHydraulic Oil

Hydraulic Quick-Couplings Flush Face Series

Hydraulic Quick-Couplings Industrial Series

Hydraulic Hose Crimper


M E M B E R

‘We Sell The Good Stuff’Why buy anything else?

1700 NICHOLAS BLVD. • ELK GROVE VILLAGE, IL 60007 • 800.852.18552335 NEWBURG ROAD. • BELVIDERE, IL 61008

E-MAIL [email protected] • WEBSITE www.abbottrubber.com

RUBBERRUBBERCOMPANY, INC.COMPANY, INC.RUBBERCOMPANY, INC.

Date post:	12-Apr-2018
Category:	Documents
Upload:	trinhhanh
View:	217 times
Download:	3 times

COMPANY, INC. RUBBER - abbottrubber.com · Construction: Black 100% EPDM rubber tube reinforced...

Documents