Company Profile

Company Profile 2016

- Growing together with the solar market

- Key expertise on photovoltaics

- Developer & early mover in developing markets

- PPAM Transparium:

bifacial, high efficient solar power

PPAM SOLKRAFT Developer & early mover in developing markets

The best of the world

Swedish engineering is a quality trademark you can trust. When

combined with high quality solar cells, in the PPAM Onyxium, PPAM

Paladium or PPAM Transparium, high yields are reached with good

thermal properties at low installation costs. Our panels are produced

using only high quality raw materials from leading suppliers. PPAM

Onyxium and PPAM Paladium are ideal for residential buildings, on

facades, industrial rooftops and large scale solar power plant

systems. The bifacial PPAM Transparium can be used in any

application such as building shading, glass railings, shading for

parking lots etc for maximum power output.

PPAM SOLKRAFT is a spin-off from

Perpetuum Automobile founded in

2002 dealing with efficient and

sustainable energy solutions. Located

in Linköping, Engineering and research

centre is connected to Linköping

university, utilized for realizing

sustainable development through

photovoltaic modules and efficiency

measures.

PPAM SOLKRAFT’s primary product is Swedish engineered high quality photovoltaic modules, using only high quality raw materials from leading suppliers. The black Onyxium module is a highly efficient mono-crystalline solar module. The Paladium module is a cost efficient Poly-crystalline photovoltaic module with a fine bluish touch. The

Transparium module is a semi-transparent module where light gets through. PPAM SOLKRAFT offers engineering services in order to establish highly efficient projects. The first start of Sustainable Plus-energy House of Sweden: What all Swedish building professors thought was impossible, PPAM SOLKRAFT, did in 2010. A successful transformation has been done of an old house into not only a passive-house, but plus-energy house. In 2012 PPAM was awarded the Energy- and climate prize 2012 by the governor of Östergötland, Sweden for innovative product development and combining phD with entrepreneurship.

PPAM SOLKRAFT - ABOUT US

PPAM SOLKRAFT - PROJECT DEVELOPER AND EARLY MOVER IN DEVELOPING MARKETS

Drivers

renewable energy with minimal environmental impact.

Responsibility

as a player in a country where environmental performance is world leading

PPAM SOLKRAFT strives to help developing markets where greater

leverage can be achieved.

Stable economy

high solidity and positive cash-flow allows for ambitious

internationalisation.

Professionalism & profitability

only projects that are characterised by professionalism and

profitability are of interest. PPAM SOLKRAFT seeks long

term and economically sustainable projects.

PPAM SOLKRAFT RESOURCE HIGHLIGHTS

20 employees 20 subcontractors and 20 technicians and workers in Sweden. 30 in Middle

East/Asia. Turnover €7,1 mln (2015) PPAM SOLKRAFT; sells, builds and commission solar power plant for all

types of utility service.

Installed power 2015: 3,3 MW

Installed abroad: 0,55 MW

Installed total since 2010: 11 MW

Sweden's first energy plus building was renovated

by PPAM SOLKRAFT in 2010, where efficiency

measures minimises the building energy use from

180kWh/m²,yr to 35 kWh/m²,yr and photovoltaic

solar modules produces 45 kWh/m²,yr.

PPAM SOLKRAFT produces photovoltaic solar

modules and utilizes them in turn-key solar power

projects or distributing them to partners for

installation.

PPAM SOLKRAFT KEY EXPERTISE ON PHOTOVOLTAICS

Unique Selling Propositions

In house R&D resulting in a scientific approach to solar power

development and a deep understanding of solar power both on a micro

level as well as on a macro level

Strong ties and long term relationships to solar component suppliers

world wide

Probably the shortest delivery time on the Swedish market

Use of advanced simulation software and almost two decades of

irradiation data providing the customer with a reliable decision base

Logging of production data for all customers leads to customer

satisfaction and early detection of irregularities

PPAM SOLKRAFT SERVICES IN PROJECT PHASES

Product and Solutions High quality Solar Module Manufacture

Solar park On-grid and off-grid

Rooftop solar power plant turn-key project

Solar house

Project realization and consultancy

Project Development

EngineeringSupply & project

Implementation

Sevice Management

Product development & Manufactaring

Supply of System

Installation & Comissioning

Conceptualization

Product Development, Design &

Verification

Technical design and analysis

Technical Consultancy and requirement

Analysis, Environmental Analysis.

Energy yield Assessment

Site Assessment and feasibility study

Tender Support

Vendor Assessment and selection

Technical Audit of Solar plant

Solar Module Manufacture

PV Component Testing

Manufacturing Inspection

& Supervision

Final Acceptance Test (FAT)

Solar power Plant

Plant Functional & Safety Tests Monitoring,

Verification of Performance

Maintenance Management

Failure Analysis

Field Maintenance (Corrective &

Preventive)

Health, Safety & Environment Inspection

Contact PPAM SOLKRAFT Finnängen, Husarvägen 57 SE-590 72 LJUNGSBRO +46 13 392040 www.ppamsolkraft.se info@ppam.se

References

Malard Solar Park, 532 kW at present, (1600 kW planned) Middle-East

Malard Solar Park 532kWp Monocrystalline Onyxium 290W. 51 SMC 9000TL inverters.

Iran’s largest solar park. In a country where gas can be bought at 25 $cent/l PPAM

SOLKRAFT realises its first major solar park.

HSB Gasellen, Linköping 693,1 kWp

Polycrystalline Paladium 285-300 Wp and monocrystalline Onyxium 250-315 W . 66 SMC6-

10000TL 1 STP 10000TL 1 STP 20000EE inverters.

http://www.sunnyportal.com/Templates/PublicPage.aspx?page=7a8e946e-7986-4d8f-923c-

19be12624227

The installation started in 2012 and became Sweden’s largest in 2013. Built in an housing-

association called Gasellen, which speaks not only for the speed of the solar development.

Centralsjukhuset Kristianstad (CSK) - 121 kWp solar sheds

PPAM Onyxium 300 W. 6 SMC 10000TL, 3 SMC 9000TL & 3 SMC 7000TL inverters.

A solar project not only produces electricity but also saves 30 MWh/year of cooling need.

Sweden’s biggest solar shed installation.

Alvesta municipality office - 80 kWp solar sheds

PPAM Transparium 360W. 3 SMC 25000TL and 1 STP 10000TL inverters.

A solar project that not only produces ~65 000 kWh of electricity annually but also saves

~30 MWh/year of cooling need.

Finnängen, 10 kW

Building integrated monocrystalline PPAM Onyxium 290 W, SMC 8000TL inverter. Prized for

its beauty. Sweden’s first renovated plus-energy house. Transformation of an old house into

not only a passive-house, but plus-energy house.

http://www.sunnyportal.com/Templates/PublicPage.aspx?page=f5e94aa8-f4d9-4629-bde9-

f52a38e1df4c

Flisby Prästgård, 84,4 kW

Polycrystalline PPAM Paladium 285 W, 6 SMA SMC 10000TL inverters.

https://www.sunnyportal.com/Templates/PublicPageOverview.aspx?plant=65f5bb6e-8ee3-

424c-a6d3-fe6eba2cc5a6&splang=en-US

The Swedish church invests in solar and chooses PPAM SOLKRAFT as entrepreneur due to

aesthetical installations.

Dagsbergsvägen2, Norrköping, 33 kW

PPAM Paladium 285 W. 3 SMC 8000TL, 1 STP 8000TL inverters. Facade-mount.

http://www.sunnyportal.com/Templates/PublicPageOverview.aspx?plant=494046fb-da41-

411a-9c6d-16ebe0d8b928&splang=en-US