D. Basu

SAV Chemicals Pvt Ltd is a Professional Manufacturer of Cyanoacrylate Adhesive (Instant Adhesives), Anaerobic Adhesive, UV-curable Adhesive, Structural Adhesive for industrial market in India. It is a Joint venture with Taiwan based Cartell Chemicals, an adhesive expert. Cartell Chemicals has been in this business for the past 20 years & is one of leading manufacturers of Cyanoacrylate and Anaerobic adhesive in Asia region with an excellent customer satisfaction. To supply the increasing demand of instant adhesives in India, SAV Chemicals offers a range of different grades and packaging. It is a solution for a product range from low viscosity to high viscosity for applications like rubber, metal, acyclic, wood, etc. We are well known by our brands: MXBON and MXLOC in international markets.

Awards

&

Certificates

4

Super Primer

De-Bonder Accelerator(liquid . spray)

5

1.All purpose series

2.Low odor, low blooming

3.Metal series

4.Rubber toughed series

5.Surface insensitive

6.High temperature resistant

1.Thread locker

2.Retaining compound

3.Pipe sealant

4.Gasketing

1.For glass

2.Plastic to metal

3.Plastic to plastic

4.Glass to metal

5.Metal to metal

6.Light- curable

1.High shear and peel strength

2.variety of substrate combinations

Cyanoacrylate Adhesive Anaerobic adhesive UV-curable adhesive Structural adhesive

NO. Appearance Type Viscosity

(CPS) Cure Speed

Gap Fill (mm)

Shear Strength-

tensile (kgf/cm2)

Specific Gravity

Temperature Range

102 CLEAR LIQUID

ETHYL 2-5 FAST 0.05 210 1.05 -50°C～

80°C

401 CLEAR LIQUID

ETHYL 75-125 MEDIUM 0.127 220 1.05 -50°C～

80°C

403 CLEAR LIQUID

ETHYL 300-500 MEDIUM 0.127 220 1.05 -50°C～

80°C

407 CLEAR LIQUID

ETHYL 700-1000 MEDIUM 0.2032 220 1.05 -50°C～

80°C

412 CLEAR LIQUID

ETHYL 1200-1500 MEDIUM-

SLOW 0.2032 220 1.05

-50°C～80°C

424 CLEAR LIQUID

ETHYL 2200-3000 SLOW 0.2032 220 1.08 -50°C～

80°C

909 CLEAR GEL ETHYL Gel MEDIUM 0.254 220 1.06 -50°C～

80°C

Suit for a variety of materials

Two types: liquid and gel

Well preservation than traditional

package

This series of cyanoacrylate

All Purpose Series, 909 Gel

shelf life and high viscosity

for use on vertical surfaces.

NO. Appearance Type Viscosity

(CPS) CureSpeed

Gap Fill (mm)

Shear Strength-

tensile (kg/cm2)

Specific Gravity

TemperatureRange

201 CLEAR LIQUID

ALKOXY-ALKYL

5-15 MEDIUM 0.0508 180 1.05 -50°C～

70°C

202 CLEAR LIQUID

ALKOXY-ALKYL

40-80 MEDIUM 0.1016 190 1.10 -50°C～

70°C

212 CLEAR LIQUID

ALKOXY-ALKYL

1200-1500 SLOW 2.794 180 1.10 -50°C～

70°C

Reduce the bad smell

Clean appearance

NO. Appearance Type Viscosity

(CPS) CureSpeed

Gap Fill (mm)

Shear Strength-

tensile (kg/cm2)

Specific Gravity

Temperature Range

701 CLEAR LIQUID

METHYL 1.8-5 FAST 0.0508 250 1.09 -50°C～

80°C

703 CLEAR LIQUID

METHYL 100-200 MEDIUM 0.1524 250 1.08 -50°C～

80°C

712 CLEAR LIQUID

METHYL 1000-1500 MEDIUM-

SLOW 0.2032 250 1.08

-50°C～80°C

Well performance in metal to rubber

Bonding strength is better than all

propose series glue

Very suited for bike and motorcycle

industries

rubber materials. They

compared to traditional

NO. Appearance Type Viscosity

(CPS) Cure

Speed Gap Fill (mm)

Shear Strength-

tensile (kg/cm2)

Specific Gravity

Temperature Range

C681 CLEAR LIQUID

ETHYL 800-1500 MEDIUM 0.2032 210 1.07 -50°C～100°C

C685 CLEAR LIQUID

ETHYL 3500-6000

SLOW 0.2032 220 1.07 -50°C～100°C

B680 BLACK LIQUID

ETHYL 300-500 FAST 0.1524 250 1.10 -50°C～100°C

B681 BLACK LIQUID

ETHYL 500-1000 MEDIUM 0.2032 250 1.09 -50°C～100°C

B684 BLACK LIQUID

ETHYL 2500-3500

MEDIUM 0.2032 250 1.08 -50°C～100°C

These rubber-adding adhesive can

resist vibration more effectively

Suitable for difficult bonding plastic like

thermal plastic

Designed for use in higher temperature

and humidity

NO. Appearance Type Viscosity

(CPS) Cure

Speed GapFill (mm)

Shear Strength-

tensile (kg/cm2)

Specific Gravity

Temperature Range

601 CLEAR LIQUID

ETHYL 80-150 FAST 0.127 220 1.05 -50°C～

80°C

606 CLEAR LIQUID

ETHYL 15-40 FAST 0.1016 220 1.05 -50°C～

80°C

695 CLEAR LIQUID

ETHYL 40-80 FAST 0.1016 210 1.05 -50°C～

80°C

Quick setting can be apply to continuous or automated production

lines

Formulated for bonding PU form, cork, rubber, and

ceramics.

Even in low humidity environment, the speed

of curing is still fast.

NO. Appearance Type Viscosity

(CPS) Cure

Speed Gap Fill (mm)

Shear Strength-

tensile (kg/cm2)

Specific Gravity

Temperature Range

TB601 BLACK LIQUID

ETHYL 400-600 SLOW 0.127 250 1.10 -50°C～135°C

T698 CLEAR LIQUID

ETHYL 500-800 SLOW 0.1778 210 1.10 -50°C～135°C

TB625 BLACK LIQUID

ETHYL 2000-3000 SLOW 0.1778 250 1.10 -50°C～135°C

Especially suitable for high temperature or

moisture environment.

Clear and black

Outstanding bonding strength and high temp. resistance

Anaerobic adhesive is a kind of resin,

when it bonding between two metal

substrates without any oxygen, it will

cure into a tough thermoset plastic.

Item No. Usage Appearance Viscosity(CPS) Cure speed

(MIN)

Torque

Strength

Break

Torque

Strength

Prevail

Temperature

Range(℉) Others

22 M 20 Below

Removable Purple 1,200~5,000 15 8 4

-54°C～150°C

Thixotropy

42 M 20 Below

Removable Blue 1,200~1,500 10~15 17 5

-54°C～150°C

Thixotropy

43 M 20 Below

Removable Blue 1,200~3,000 10~15 20 7

-54°C～150°C

Thixotropy

62 M 20 Below Red 1,600~5,500 15 22 10 -54°C～150°C

Thixotropy

71 M25 Below Red 400~600 15 26 36 -54°C～150°C

－

72 M36 Below Red 6,000~10,000 15~30 20 30 -54°C～230°C

High

Strength

77 M36 Below Red 6,000~8,000 40 32 32 -54°C～150°C

－

90 M2 - 12 Green 20~70 10~15 7 30 -54°C～200°C

Penetration

1. Different strength(high, medium, low), color(red, blue, purple, green)

2. Resist vibration 3. For various size of metal

screws 4. Anti-rust 5. Resist the temperature

changes 6. Easy to use 7. Resist most of the chemical

solvent

Item No Usage Appearance Viscosity

(cps) Cure

Speed(min) Gap Fill (mm)

Temperature Range

Shear Strength

01 Low Viscosity Green 100~150 10~15 0.05 -54°C～150°C

>15N.m

20 High

Temperature Green

5,000~12,000

10~15 0.38 -54°C～200°C

>17N.m

38 Slp Fit Green 2,000~3,000 10~15 0.25 -54°C～150°C

>25N.m

48 Press Fit Green 400~600 10~15 0.15 -54°C～150°C

>25N.m

80 Slip Fit Green 1,250~2,000 15 0.4 -54°C～150°C

>19.3N.m

1. Allow more tolerance of the objects

2. Resist vibration 3. Anti-rust 4. Resist the temperature

changes 5. Easy to use 6. Resist most of the chemical

solvent

Item No. Usage color Viscosity

(cps)

Temperature Range

(℃)

Compressive (Psi)

545 Hydraulic/Pneumatic Purple 9,000~20,000 -54°C～150°C 10,000

542 Hydraulic/Pneumatic Brown 1,200~2,750(Thi

xotropy) -54°C～150°C 10,000

565 PST Thread Sealant White 175,000~525,00

0 -54°C～150°C 10,000

567

PST Thread Sealant/High Temperature

White 280,000~ 800,000

-54°C～200°C 10,000

577 All Coarse Metal

Thread Yellow

70,000~130,000(Thixotropy)

-54°C～150°C 10,000

1. Different usage(hydraulic, pneumatic, stainless steel), color(purple, brown, white, yellow)

2. No aging, no shrinkage 3. Can be adjusted before

cured 4. disassemble 5. Resist the temperature

changes 6. Easy to use 7. Resist most of the chemical

solvent

Item No. Usage Color Viscosity

(CPS) Gap

Fill(mm) Temperature Range(℃)

Cure speed(hr)

515 Flexible Purple 700,000~1,5

00,000 0.25

-54°C～150°C

1-2hr

518

Suit For Metal

Include Aluminum

Red 3,000,000~4,500,000(Thi

xotropy) 0.25

-54°C～150°C

1-2hr

1. Reduce the storage cost, need no O rings or flanges.

2. Allow worse machining accuracy

3. Anti-rust 4. Resist the temperature

changes 5. Easy to use 6. Resist most of the chemical

solvent

Item No. Color Viscosity

(CPS) Hardness (Shore D)

Strength (N/mm2)

Cure Speed (100mW/c

m2)

Method of Curing

Bonding Type Dry-to-Touch

Mxcur

WSR CLEAR 80 85 N/A 10s Visible Light Window Repair N

Mxcur011 Clear 130 83 >9 5s UVA Plastic to Metal N

Mxcur311 Clear 20 55 >4.5 5s UVA PVC,

Polycarbonate N

Mxcur321 Clear 5300 55 >5 10s UVA PVC,

Polycarbonate N

Mxcur349 Clear 750 75 6.5 10s UVA Glass to Glass N

Mxcur350 Clear 1600 75~85 >6 10s UVA Glass to metal N

Mxcur351 Clear 1600 75~85 >6 15s Visible Light Consumer Glass

Bonding N

Mxcur352 Clear 18000 72 15 10s UVA Potting N

Curing time is short, suitable for mass production line.

Fixture time is stable to be used in a

automated production line.

Three curing type: 1.UV light 2. Visible

light 3.Activator

Item No. Appearance Usage Viscosity(cps) temperature

range

326 light amber liquid anaerobic with activator7649

14,000~22,000 -55°C～120°C

330 colorless to pale

yellow liquid with activator7837 45000~90000 -55°C～120°C

Item No. Usage Appearance Viscosity Contents

Activator

7649

To shorten anaerobic adhesive curing time when it is used in insensitive metals

Green 2 Acetone

Activator

7387 With acryl structural adhesive 330

Amber Liquid

1~2cps N-heptane + Isopropanol

1. Suitable for a variety of materials

2. Impact resistance, high strength

3. Anti-rust 4. Working in room

temperature 5. Allow more gap of two

substrates 6. Use activator to cure

Costumer

First