Date post: | 07-Jul-2015 |
Category: |
Technology |
Upload: | olympus-ims |
View: | 339 times |
Download: | 3 times |
Comparing Data with a Waterfall Plot
A Waterfall Plot can be used to: • View all your diffraction patterns together • Compare similar samples • Follow trends through a series of data
1. Open multiple diffraction patterns • Left click on the first and last file while holding the shift key and then
press the open button
2. Stack the plots • Once all the files have loaded, click the Stack button
3. Create a Waterfall Plot • Use the box in the lower center of the screen to adjust the depth and
angle of the waterfall plot by clicking in the blue field • Clicking to the left or right of center will angle the patterns so you
can inspect each pattern for similar peaks
4. Additional graphic options • The box in the lower right hand corner provides additional tools to
rescale or shadow the area under the patterns for a different visual affect
5. Save the file • Once you have the desired plot, click File, Save Graphic
For more information: http://www.olympus-ims.com/en/innovx-xrf-xrd/
Thank you!