dynapac.com
CA 30 D / 30 PD - Technical specifications
Compaction SpecialistWith Dynapac performance, you can achieve first-rate compaction results with the best possible overall economy. Dynapac soil compactors are vibratory rollers with state-of-the-art designs and unique features designed for efficient compaction.
Having over eighty years of experience, research and performance tests worldwide, these equipment that are designed in Sweden and produced in India, offer the most appropriate solution to the compaction demands at your work site.
Dynapac reserves the right to change specifications without prior notice. The photos and illustrations that are part of this brochure may contain optional elements. The information contained in this brochure refers only to a general description, does not contain any type of guarantee.
Complete line of single drum vibratory rollers for soil compaction
CA Line - Main technical characteristics
Available in Canopy, ROPS and Air conditioned Cabin options
Length 5.600 mm
Width 2.256 mm
Height 2.890 mm
Dynapac brings you the new CA rollers -- a large family of single drum vibratory rollers with operating weights ranging from 10000 kg to 12900 kg. These rollers and their versions compact any type of soil, from cohesive and granular soils to rock fillings in dams.
*The full features of the CA 30 D / PD are shown on the next page. *PD is PD Shell
Cummins QSF 3.8 (IIIA/T3)/Cummins 4BTA3.9 (T1)
97 kW (130 hp) @ 2200/76 kW( 102 hp) @ 2300
Traction Hydrostatic
Vibration Hydrostatic
Steering Hydrostatic
Service brake Hydrostatic in forward and reverse lever.
Parking/ Emergency brake Failsafe multidisc brake in rear axle and frontdrum motor.
12 V outlet (IIIA/T3 only); Amplitude, dual; AVC, Automatic Vibration Control; Back-up alarm; Battery switch; Brake release; Emergency stop; Filler caps lockable; Fuel level gauge; Fuel tank drainage; Hood, lockable; Horn; Hour meter; Hydraulic check-points; Interlock; Lifting points; Neutral start arrangement; Operator's platform, vibration dampened; Operator's comfort seat mechanical suspension, adjustable forward & reverse; Driving Lights; LED Working Lights; Rear view mirrors; Dual Scrappers; Parking brake; Rear axle Limited slip (Dual Speed); Service indicators/warnings; Storage box on operator's platform; Tie- down points; Tool boxes, integrated in fenders; User's instructions, one set; Vandalcover (over instrument panel); Vibration quick stop
Static Linear Load (kg/cm)
Rear Module Weight (kg)
Front Module Weight(kg)
Operating weight(kg)
Speed (Dual)
Drum Thickness (mm)
Drum Drive
Drum Diameter (mm)
Frequency (High/Low)
Amplitude(Low) mm
Centrifugal force (High/Low) (KN)
Theor. Max. Gradeability (%)
Amplitude(High) mm
Drum Width (mm)
Engine make
Rated Power
1.2
250/123
Cummins 4BT3.9 T1/ Cummins QSF 3.8 T3
11900
7100
-
33/33
Yes
4800
2130
0-8 km/h
1500
25
0.6
102HP@2300 rpm/ 130HP@2200 rpm
10300
5500
0-8 km/h
2130
102HP@2300 rpm/ 130HP@2200 rpm
33/33
0.9
25
1.8
4800
Yes
1500
26
Cummins 4BT3.9 T1/ Cummins QSF 3.8 T3
250/123
11100
102HP@2300 rpm/ 130HP@2200 rpm
30
250/123
33/33
4800
1500
0.9
Yes
0-8 km/h
2130
25
Cummins 4BT3.9 T1/ Cummins QSF 3.8 T3
1.8
6300
2130
7900
4800
0-8 km/h
12700
Yes
-
25
33/33
0.6
1.2
250/123
Cummins 4BT3.9 T1/ Cummins QSF 3.8 T3
102HP@2300 rpm/ 130HP@2200 rpm
1500
7350
2130
12100
4750
0-7 km/h
Yes
35
33/33
0.8
42
1510
Cummins 4BT3.9 T1/ Cummins QSF 3.8 T3
102HP@2300 rpm/ 130HP@2200 rpm
250/123
1.7
30
Machine Description CA25D CA25PD CA30D CA30PD CA35D
52 48
Data CA150D/PD CA150A CA25D/PD CA30D/PD CA35D/PD CA5000D/PD CA6500D/PD CA610D/PD
Operating weight 7.180/7.610 kg 7.600 kg 10.300/11.000 kg 11.300/12.100 kg 12.300/12.400 kg 16.200/16.500 kg 20.900/20.800 kg 20.700/20.700 kg
cilindro delanteroMód. de peso
3.555/3.980 kg 3.900 kg 5.400/6.000 kg 6.300/7.100 kg 7.400 kg 10.700/10.950 kg 13.950/13.850 kg 14.050/14.050 kg
speed 0 - 5 km/h 0 - 7,5 km/h 0 - 11 km/h 0 - 11 km/h 0 - 11 km/h 0 - 11 km/h 0 - 11 km/h 0 - 11 km/h
Cylinder drive Yes / Yes No Yes / Yes Yes / Yes Yes/ Yes Yes / Yes Yes / Yes Yes/ Yes
Cylinder diameter 1.220 mm 1.220 mm 1.498 mm 1.498 mm 1.498 mm 1.536/1.518 mm 1.546/1.518 mm -
cylinder width 1.680 mm 1.680 mm 2.130 mm 2.130 mm 2.130 mm 2.130 mm 2.130 mm 2.130 mm
Cylinder thickness 22 mm 20 mm 25 / 20 mm 25 / 20 mm 30 / 20 mm 43 / 34 mm 48 / 34 mm 50 / 35 mm
Ramp Climb 55% 55% 43/53% 43 / 53% 43 / 53% 56% 56% -
Dynamic ImpactHigh amplitude
14.937/18.245 kgf
15.422 kgf 30.821/33.532 kgf 31.793/34.632 kgf 32.892/34.932 kgf 43.700/43.950 kgf 49.950/49.850 kgf 45.750/37.150 kgf
High nominal amplitude 1,7 mm 0,8 mm 1,9 / 2,0 mm 1,9 / 2,0 mm 1,7 / 2,0 mm 2,1 / 1,9 mm 2,1 / 2,1 mm 1,8 / 1,8 mm
Amplitudebad note 0,8 mm 0,4 mm 0,9 / 1,1 mm 0,9 / 1,1 mm 0,8/ 1,1 mm 0,8 / 0,9 mm 0,8 / 0,8 mm 1,1 / 1,1 mm
Cargo Est. lineal 21,2 Kg/cm 23,3 kg/cm 25/- kg/cm 30 / - kg/cm 35 / - kg/cm 50 / - kg/cm 65 / - kg/cm 66 / - kg/cm
Vibration frequencyHigh / Low
31 / 43 Hz 45 / 45 Hz 33-33 / 30-30 Hz 33-33 / 30-30 Hz 33-33 / 30-30 Hz 29 / 30 Hz 29 / 30 Hz 29 / 31 Hz
MotorCummins QSB 3.3
Tier380 hp (60 kW)@ 2200 rpm
Cummins QSF 3.8IIIA/T3
130 hp (97 kW)@ 2500 rpm
IIIA/T3130 hp (97 kW)
Cummins QSF 3.8
@ 2500 rpm
Cummins QSF 3.8IIIA/T3
130 hp (97 kW)@ 2500 rpm
174 hp (128 kW)
TCD2012L06Tier 3
Deutz
@ 2200 rpm204 hp (150 kW)
Deutz
Tier 3TCD2012L06
@ 2200 rpm
Tier 3170 hp (127 kW)
@ 2200 rpm
Cummins QSB 6.7
Dynapac Soil Rollers
Vibrating floor rollers of the CA familyThis roller line offers the end user the ultimate in productivity, performance and low-cost compression. The models that make up the line have operating weights that vary from 7,000 to 21,000 kg. They compact granular, cohesive soils and also fill rocks with stones up to 1 meter in diameter.
Mass* (kg) CA30D CA30PDOperating weight (incl. canopy) 11.100 12.700
Front / rear module weight (incl. canopy) 6.300/4.800 7.900/4.800
Operating weight (max.) 11.300 12.900
Legs kit weight (cone) 1.650 ---
TractionSpeed, km / h 0 - 8
Vertical swing ±9°
Tire size (12 canvases) 23,1 x 26
Max. Grade ability (theoretical),%
CompactionLinear static load, kg / cm 30 ---
Amplitude (high / low) mm 1.8 / 0.9 1.2 / 0.6
Vibration frequency (high / low) Hz 33/33
Centrifugal force (high / low) kN 250/123
Total dynamic impact (high / low) kgf 31.300 / 18.600
EngineManufacturer / Model Cummins QSF 3.8 (IIIA/T3)/
type Turbo diesel, water cooled
Power, SAE J1995 rpm 97 kW (130 hp) @ 2500
Fuel tank, liters 280
Electric system 12 V
Hydraulic systemTraction Traction control - Variable PMP engines
Non-Spin Axese Rexroth Pumps
Traction Rexroth 32cc engine.
Direction Constant flow gear pump.
Service brake Hydrostatic forward / reverse lever.
Emergency / parking brake Multi-disc safety brake on the rear axle and the front drum drive motor.
Standard Equipment Optional Equipment
ROPS / FOPS cab, Comfort operator swivel seat, 18.4 x 26 tractor tire (10 tarps), dual speed traction system (limited slip rear axle), speedometer, 12V plug, reverse alarm, main switch of the battery, release Brake brake, emergency brakes, double range and frequency, hood with lock, fuel level indicators, fuel tank drain, horn, stopwatch, hydraulic control points, interlocking, lifting points, engine Neutral starter, shock absorber platform, parking brake, fixed flat cylinder scraper, 2 "seat belt, indicators and service warnings, operator platform storage box, mooring points, instruction manual (one set ), vandal-proof cover of the operation panel.
CA25D
CA25D/PD
Cylinder belt (sheepskin kit)
CA25PD
Cylinder belt (sheepskin kit), compaction meter, traction control traction system (variable motors and rear axle without turning), tractor tire 23.1 x 26 (12 layers), balloon tire 23.1 x 26 ( 8 canvases), bonnet, ROPS / FOPS platform, additional user instruction set, first aid kit, traffic lights, work lights (LED), MP3 radio (cockpit), rearview mirrors, remote monitoring (Dyn @ link), rotating flag, double fixed flat cylinder scraper, double flexible flat cylinder scraper, speedometer, tool kit.
140 foot drum
50 hours Service kit; Bolt-on padfoot shell, CA25D/30D; Compaction Meter (CMV), First aid box; Lights, driving, right hand traffic; Radio with MP3 (Cab); Remote monitoring, Dyn@Link; Rotating beacon
48
(8 Ply)
Dynapac Compaction
Single roller,multiple applications
We look for our most primitive instincts.
To find the true essence of a Dynapac device.
To meet the wildest and most aggressive construction challenges, we present the most powerful compactor roller ever seen.
Dynapac CA Series: Agile, robust, comfortable, economical.A new performance standard for single cylinder rollers from 10 to 12 tons.
Follow your instincts. With these rollers there are no obstacles in your project.
Designed for performance, built to last far beyond all the expectations
Designed for the most demanding environments, the new CA series overcome any construction challenge.On roads, streets and works around the world, once again, Dynapac leaves its mark. The hallmark of innovation.
The new CA series also revolutionize maintenance operations. Its completely open bonnet provides quick and simple access to all machine components.
This roller achieves optimal compaction with less strides. It's high static linear load is unmatched and the total compaction force is the highest between the compactor rollers in its class.
In the panel, the control instruments are rationally distributed, facilitate reading and understanding and still give you very simplified access.The operation is made easier and the compaction control and productivity are guaranteed.
Equipped with operator seat lock sensor, hydrostatic brake and emergency brake acting on the differential. Simply press a button on the panel for immediate stop. In the event of a breakdown in the electrical system, in the brake valve or in the motor, the stop is automatic.
Superior traction and high productivity.Full access toEngine components
Dashboard rational
Extra securityEmergency break
Compression ofSuperior quality
FOCUS ON OPERATOR
MOTOR COMPACTION VIBRATIONMAINTENANCE
EASY
ECONOMIC PERFORMANCE Its high performance engine unites power with economy,silent operation, ease of use and low emissions of pollutants.
LAST GENERATION ROLLER The exclusive Dyn@link telemetry systemmonitors equipment conditions and location.
VERSATILITYThis series is versatile, Available in 2 versions, smooth and pad foot shell, ensuring the best performance on all types of soil
EXTRA TRACTION Variable drive of the engine on the front cylinder and axleRear and exclusive Limited Slip system, guarantees a bettertraction. No matter the type of soil, even in steep slopes.
SECURITY AND COMFORT
GREAT PERFORMANCEThis series has the highest level of performance in its class.
A new safety and comfort standard with Comfort seat available with three operating platform options: Open canopy, ROPS/FOPS and air conditioned closed cab
MORE ERGONOMICAll controls are intuitive and easily accessible. The operator has a broad view of all the work.
MODERN, EXACT AND INTELLIGENT With each compaction pass, the Compaction Meter system indicates when the optimum level has been reached by locating fragile areas, saving time, fuel and money.
FOLDABLE CANOPY Dynapac's unique foldable canopy design ensures lowest transport height (2400 mm), allowing transportation in small trucks and thereby reducing transport costs.