www.petroEDGEasia.net

COMPLETIONS “MADE CLEARER”: EQUIPMENT, APPLICATIONS, TYPES, INSTALLATION & WORKOVERS

Your Expert Course Leader: Gordon Duncan Practising completions & well services professional with 30 years of oilfield experience from careers in Petro-Canada, Santos, Shell EP International, Petroleum Development Oman (PDO) and BP. Currently serving as Technical Director in PetroEdge.

What past delegates have said about this training course: “Excellent course for all completions engineers” Smartwell Completion Engineer, Halliburton Brunei

“A very engaging session with Gordon. Excellent speaker and very competent on the subject” Well Intervention Engineer, Murphy Oil

“Very good trainer in terms of skills and knowledge” Subsea Tree Engineer,INPEX Indonesia

“Informative and well delivered” Night Drilling Supervisor, ROC Oil (Bohai)

“Good presentation with high technical knowledge” Well Services Supervisor, PETRONAS Carigali

Conduct this training course in-house for more effective savings! Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at

www.petroedgeasia.net

COMPLETIONS “MADE CLEARER”: EQUIPMENT, APPLICATIONS, TYPES, INSTALLATION AND WORKOVERS

Course Introduction This intensive five-day course is designed to provide participants with a thorough knowledge of completion equipment and operational procedures required for converting a drilled well into an efficient and safe producer. It follows a practical approach for the various completion types, specific applications, completion installation and workovers.

Course Objectives To enable participants to understand the different types of completions as well as the applications for specific completion equipment including installation and workover methods. After completing this course you should be able to:

List well data needed for well completion activities

Illustrate different types of completions

Describe the application of different completion fluids

Prepare a list of down hole and surface completion equipment

Describe the procedure for running a completion

Describe different methods of well workovers

Identify wellheads, trees, valves and chokes

Illustrate subsurface safety valve design, selection and operation

Explain packer selection and forces on packers

Describe landing nipples and plug

Who Should Attend Drilling, Completion, Intervention, Well Site Leaders, Drill Site Manager, Well Site Manager and related Industry Personnel

About Your Expert Course Leader: Gordon Duncan Gordon has over 37 years of oilfield experience specializing in Technical and Commercial Operations in Drilling, Completions & Well Services professional with both IOC’s & various service companies, just to name a few, include Shell EP International, Santos, Petro-Canada, Petroleum Development Oman (PDO) and BP. Todate, he has taken on several training instructor assignments around the world including

Malaysia, Spain, Thailand, Brazil, the UAE, Iraq, Iran & Indonesia as well as Australia. He currently delivers training on Completions Fundamentals for BP Well Site Leaders of the Future and the Chevron “Horizon Programme to Trainee Drill Site Managers”. This programme has spanned over 18 courses delivered in Houston, Baku, Duri, Bangkok, Aberdeen & Perth.

At petroEDGE. Gordon Duncan is your go-to person for understanding your training requirements, as well as teaching and authoring bespoke training manuals. Gordon can also be engaged for consulting services including contracting and management of 3rd party contracts in areas of Gap Analysis (technical, mechanical and operational solution); Well Engineering Services from project concept to Completion; Well Operations Services (plan, supervise and close out support to the Well Engineering Team); Remote location feasibility studies and planning; Estimates of Well Project Time/ Cost; Well Engineering Studies and Risk Assessment just to name a few.

Gordon is also available to offer customizable in-house training courses and consulting for Well Integrity, Completions and Invention disciplines. Through in-house training you receive targeted training at work, tied into the demands and specific requirements of your projects and team members. We deliver this by face to face instructor led training at a location and time convenient for you. For more information about Gordon and his work, visit us at www.petroedgeasia.net. Or find out how Gordon can assist with your internal training or project requirements, please email your query to info@asiaedge.net. You may also call us directly at +65 6741 9927.

Conduct this training course in-house for more effective savings! Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at

www.petroedgeasia.net

COMPLETIONS “MADE CLEARER”: EQUIPMENT, APPLICATIONS, TYPES, INSTALLATION AND WORKOVERS

5 DAY COURSE AGENDA

DAY 1 APPLICATIONS This session will cover Completion Types: - Upper and Lower Completions

Definitions

Tubing Architecture

Sand Control Completions

Horizontal Completions

Multi-Lateral & Intelligent Completions

DAY 2 TYPES OF DOWNHOLE COMPLETION EQUIPMENT This session will cover all of the common types of equipment used in completions: - What is the function of each equipment?

Why it is ran?

Is it essential?

Is it safely critical?

What problems might be encountered during the installation of each item of equipment?

Reliability / Operability concerns

DAY 3 TYPES OF SURFACE COMPLETION EQUIPMENT During this session, we will cover Surface Equipment that is used during Well Completions Wellheads, Tubing Hangers and Trees

Chokes

Surface Safety Valves

Remote shut down systems

Flange and Gasket classification

DAY 4 RUNNING THE COMPLETION (INSTALLATION) During this session, we will look in detail at the processes and practices used when running a Completion

Off site preparation

Rig site preparation

Running the Completion

DAY 5 WORKOVERS This session will give an understanding of Workover Operations and you will: -

Be able to describe the common applications for Workovers

Understand Workover Well Control issues

Understand the main problems associated with Workover

Door opens at 0830hr. Sessions commence at 0900hr on all days, with short intervals at 1030hr and 1530hr respectively. Lunch will be provided at 1230hr for 1 hour. Sessions will end at 1700hr on all days

RR

Conduct this training course in-house for more effective savings! Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at

www.petroedgeasia.net

COMPLETIONS “MADE CLEARER”: EQUIPMENT, APPLICATIONS, TYPES, INSTALLATION AND WORKOVERS

DELEGATE DETAILS Delegate 1

Please note - Indicate if you have already registered by Phone

+Fax +Email +Web - If you have not received an acknowledgement

before the training course, please call us to confirm your booking.

- Photocopy this form to register multiple delegates.

PAYMENT METHODS By Cheque/ Bank Draft Make Payable to Asia Edge Pte. Ltd.

By Direct Transfer Please quote your invoice number with the remittance advise Account Name: Asia Edge Pte. Ltd. Bank Number: 508 Account Number: 762903-001 Swift Code: OCBCSGSG

All bank charges to be borne by payer. Please ensure that Asia Edge Pte Ltd receives the full invoiced amount. PAYMENT POLICY Payment is due in full at the time of registration. Full payment is mandatory for event attendance. By submitting this registration form, you have agreed to Asia Edge Pte Ltd’s payment terms CANCELLATIONS & SUBSTITUTIONS You may substitute delegates at any time. For cancellations received in writing more than seven (7) days prior to the training course, delegates will receive a 100% credit on the amount paid which can be used in another Asia Edge Pte. Ltd. training course for up to one year from the date of issuance. The credit is transferable to other persons in the same company and applicable against any future Asia Edge Pte. Ltd. public course. For cancellations received seven (7) days or less prior to an event (including day 7), no credit will be issued. In addition, a cancellation fee equivalent to 15% of the course fee will be charged. In the event that Asia Edge Pte. Ltd. postpones or cancels a course, delegate payments at the date of cancellation or postponement will be credited to a future Asia Edge Pte. Ltd. course. This credit will be available for up to one year from the date of issuance, and it is transferable to other persons in the same company and applicable against any future Asia Edge Pte. Ltd. public course. Asia Edge Pte. Ltd. does not provide refunds for cancellations and postponements or waive fees for unpaid invoices upon receipt of registration. PROGRAM CHANGE POLICY Please note that speakers and topics were confirmed at the time of publishing; however, circumstances beyond the control of the organizers may necessitate substitutions, alterations or cancellations of the speakers and/or topics. As such, ASIA EDGE PTE LTD reserves the right to alter or modify the advertised speakers and/or topics if necessary. Any substitutions or alterations will be updated on our web page as soon as possible.

This brochure may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form in whole or in part without prior written approval of ASIA EDGE PTE LTD

ASIA EDGE PTE. LTD. Company Registration No: No. 200710561C Copyright@ 2005 ASIA EDGE PTE LTD. All rights reserved.

Mr Ms Mrs Dr Others: Name :

Job Title :

Department :

Telephone No.

:

Email :

Delegate 2 Mr Ms Mrs Dr Others: Name :

Job Title :

Department :

Telephone No.

:

Email :

Company :

Address :

Country : Postcode:

Attention Invoice to

:

Telephone No.

:

Fax No. :

4 EASY WAYS TO REGISTER Online: www.petroedgeasia.net Email: info@asiaedge.net Phone: +65 6741 9927 Fax: +65 6747 8737

COMPLETIONS “MADE CLEARER”: EQUIPMENT, APPLICATIONS, TYPES, INSTALLATION AND WORKOVERS

R E G I S T R A T I O N F O R M