_completo_IMER_MPT_catalogo_0809_EN

2008_2009

table of contents

Mortar and Plaster Sprayer Koine 3 - Koine 3L 01

Mortar and Plaster Sprayer Koine 35 02

Mortar and Plaster Sprayers Koine 4 - Koine 5 03

Screw Pump Small 50 04

Screw Pump Silent 300 05

Screw Pump Step 120 06

Continuous Mixer Spin 15 - Spin 15 a 08

Continuous Mixer Spin 30 09

Floor-screed Conveyors Mover 190 e - Mover 270 e 10

Floor-screed Conveyors Mover 190 d - Mover 190 db 12

Floor-screed Conveyors Mover 270 d 14

Concrete pump Booster 15 16

Screw Pump Step 120 a 18

Screw Pumps Silent 300 a - Silent 300 cl 19

Useful address and Branch Offi ces 20

Mortar Spraying and Conveying Machinery DivisionThe Certaldo (Florence) factory, set over an area of more than 30,000 square metres, of which 6,200 are covered, with 62 staff, is dedicated to the production of mortar spraying and conveying machinery: mortar and plaster sprayers for traditional and pre-mixed materials, fl oor-screed conveyors, continuous mixers and transfer systems for dry materials from silos. This division, created in 2004 following considerable investment in research and development, was created to widen the Group’s product range with a line which responds to the growing use of pre-mixed materials and greater on-site mechanization.

By now a solid benchmark for the market, the Mortar Spraying and Conveying line is constantly involved in the development of new models with competitiveness in the construction sector as a constant priority, thanks to the professionalism and considerable experience of technicians and engineers. The IMER Group has always been sure to provide customers with high-quality training support. As a result it invests a lot in training, organised to provide detailed explanation of the correct use of equipment, the application of safety norms and the diverse performance of machinery.

Single-phase plaster sprayer for dry premixed materials and insulating plasters

Advantages:Single-phase motor – Control panel with exclusive IMER 3 speed inverter and material fl ow rate of 8-11-15 l/min (Koine 3) / 11-15-20 l/min (Koine 3L) – User-friendly controls with red led display – Standard hour meter – Exclusive IMER diaphragm compressor for lower maintenance – Self-priming water pump with stainless steel casing and brass impeller – Brass water system – Tiltable mixing chamber and quick screw-stator changing – Can be disassembled into 4 modules for easy transport – 4 wheels and 2 hooks for easier on-site handling – Safety devices according to the latest CE standards. Choose Koine 3:for mixing and spraying premixed materials in bags.

Choose Koine 3L:for mixing and spraying premixed plasters, insulating plasters and lightened materials.

Standard Equipment• Electric diaphragm compressor• Truncated-cone hopper with mixing chamber• Standard mixer (Koine 3)• Mixer for lightened materials (Koine 3L)• Removable bag breaker grid (Koine 3)• Higher capacity breaker grid + 20 litres (Koine 3L)• Gearbox motor for mixing and pumping• ECO-STAR stator and screw (Koine 3)• D 8-1.5 ECO stator and screw (Koine 3L)• Material delivery pressure gauge• Control panel with inverter• Self-priming water pump• Water system with fl ow meter• 4 wheels (2 pivoting wheels, 1 of which with brake)• 20 m electric cable with 16 A plug• 20 m water hose Ø 13 mm• 16 m air hose Ø 13 mm• 15 m hose for material Ø 25 mm• Spray nozzle• Defl ectors for premixed materials• Metal accessory box• Washing sponge• Scraper• Remote pneumatic control

ACCESSORIES

Rotor and stator Defl ector Material hose Ø 25 mm Spray gun Washing sponge

01(*) NOTE The pumping distance may vary depending on: the type of material used, pumping height, material consistency, type of pump installed.

Koine 3 Koine 3L Supply - V 230 - Hz 50 V 230 - Hz 50

Max. installed power kW 3,4 3,4

Mixing motor power kW 2,2 2,2

Material fl ow rate l/min 8-11-15 11-15-20

Maximum pumping distance* m 15 15

Hopper capacity l 50 70

Loading height mm 1000 1090

Dimensions width/length/h mm 685/1450/1270 685/1450/1270

Weight kg 191 195

Sound pressure level dB (A) < 76 < 76

Electric compressor - kW 0,75 250 l/min kW 0,75 250 l/min

Koine 3

Koine 3L

Single-phase mortar & plaster sprayer for dry premixed materials

Advantages:Single-phase motor – Control panel with exclusive Imer 3 speed inverter with variable fl ow rate of 8-11-15 l/min – User-friendly controls with red led display – Standard hour meter – Exclusive IMER diaphragm compressor for lower maintenance – Self-priming water pump with stainless steel casing and brass impeller – Brass water system – Tiltable mixing chamber for quick and easy screw-stator changing – Chamber wheel for optimum mixing chamber supply with every type of premixed material – Can be disassembled into 4 modules for easy transport to storeys – Safety devices according to the latest CE standards.

Choose Koine 35: for mixing and spraying premixed materials in bags or from silo.

Standard Equipment• Electric diaphragm compressor• Self-priming water pump• Bag breaker grid• Mixer gear motor• Feeding wheel gear motor• ECO-STAR stator and screw• Control panel with inverter• Material delivery pressure gauge• Water system with fl ow meter• 4 castors (1 with brake)• Spray nozzle• 20 m electric cable with 16 A plug• 20 m water hose• 15 m material hose Ø 25 with cam couplings • 16 m air hose Ø 13 with Geka couplings• Accessory box• Material hose washing sponge• Scraper• Remote pneumatic control

Optional Accessories• Wide helicoidal mixing paddle• Turbomixer• Hood for supply from silo

02 (*) NOTE The pumping distance may vary depending on: the type of material used, pumping height, material consistency, type of pump installed.

Koine 35 Supply - 230V – 50 Hz

Max. installed power kW 3,77

Mixing motor power kW 2,2

Mixer power rate kW 0,37

Material fl ow rate l/min 8-11-15

Maximum pumping distance* m 15

Hopper capacity l 110

Loading height mm 900

Dimensions width/length/h mm 680/1560/1190

Weight kg 255

Sound pressure level dB(A) < 76

Electric compressor - kW 0,75 250 l/min

03

Plaster sprayers for dry premixed materials

Advantages:Higher than average motor power rate with continuous S1 service – Exclusive IMER diaphragm compressor – Self-priming water pump with stainless steel casing and brass impeller – brass water system, optimised electric control panel with only one 18.5 kW oversized contactor – Safety devices according to the latest CE standards.

Choose Koine 4/5:for mixing and spraying premixed materials in bags or from silo (lime-cement base plasters, gypsum, insulations).

Standard Equipment• Electric diaphragm compressor • Self-priming water pump• Electric supply and control panel• Stator and Screw D6-3• Nr. 40 m electric cable• Nr. 40 m water hose• 15 m hose for material Ø 25 with cam couplings• 16 m air hose Ø 13 with Geka couplings• Accessory box with gun and connectors • Cleaning accessories (scraper and sponge)• Preset for self-levelling screed kit

(*) NOTE The pumping distance may vary depending on: the type of material used, pumping height, material consistency, type of pump installed.

Koine 4 Koine 5 Supply - V 400 - Hz 50 V 400 - Hz 50

Max. installed power kW 7,75 7,75

Mixing motor power kW 5,5 5,5



Material fl ow rate l/min 22 22


Weight kg 263 263

Maximum pumping distance for K4-K5* - Hose Ø 25 mm / m 25 Hose Ø 35 mm / m 50


Electric compressor - kW 0,95 A 2,2 l/min 250 kW 0,95 A 2,2 l/min 250

Koine 5: suitable for interiors

with 700 mm doors wide

Rotors and stators Defl ector Spray gun Washing spongeKoine blower hood Mixing paddle for insulating plaster

Koine 4

ACCESSORIES

Multi-purpose screw pump for traditional mortar and premixed materials

Advantages:Electric panel with exclusive IMER inverter for top performance and wide range of fl ow rate – Motor with 3 levels of protection – Safety devices according the latest CE standards – Exclusive range of accessories for the widest variety of applications.

Choose Small 50: for spraying traditional mortar and premixed plasters, premixed thixotropic products, waterproofi ng products, smoothing and colured products, coatings with paints; for fi lling joints; for strengthening injections.

Standard Equipment• Electric supply and control panel• Stainless steel hopper• Rotor and stator D8 1.5 ECO• Electric remote control with 16 m cable• 20 m electric supply cable• Arranged for pneumatic control• Arranged for vibrating grid• Pressure gauge unit• Accessory box

Optional Accessories• Premixed / traditional mortar kit• Injection kit• Spacing and smoothing kit• Painting kit• Vibrating grid• Diaphragm compressor• Piston compressor• Bag crusher roller• Radio control• Hopper stainless steel cover


Diaphragm compressor Washing spongeRotor and statorHopper cover Vibrating grid Bag crusher roller

Spray gun: for spacing, smoothing, painting and injections with fi ttings Material hose Ø 25 mmAir hose Ø 13 mm

Spray gun for traditionalmortar and premixed plaster Defl ector Defl ector Defl ector

On site applications for SMALL 50

Small 50 Supply - V 230 - Hz 50

Motor power rate kW 1,5

Motor speed rpm 8±140



Material fl ow rate l/min 0,8±14


Weight kg 69

Maximum pumping distance Hose Ø 19 mm* m 15

Maximum pumping distance Hose Ø 25 mm* m 25

Sound pressure level dB (A) < 74

04

Small 50 complete with optional vibrating

grid and air diaphragm compressor

ACCESSORIES

05

Hydraulic screw pump for premixed and conventional plasters

Advantages:3-cylinder, liquid-cooled diesel engine for improved noiselessness – Engine that meets the latest anti-pollution regulations – Operating speed of 2400 rpm for less wear and low consumption – Variable displacement pump for low oil heating and higher effi ciency of the hydraulic circuit – High capacity mixer – Safety sensor for stopping the paddles if the grid is opened – Simplifi ed control panel and controls within the operator’s reach – Standard hour meter (for work/maintenance/renting), two height-adjustable stabilisers for quick machine positioning on the site – Top cover tilting by gas springs for quickly inspecting inside the machine – Reduced and balanced weight simplifi es on-site handling – Optional 140 bar high pressure jet cleaner.

Choose Silent 300:for conventional and premixed plasters.

Standard Equipment• Hopper with stirring screw• Diesel engine• Hydraulic variable displacement pump• Control panel• 2 155R13 tyres• 2 adjustable stabilisers• 2 cyclist protection bars• Road towing kit• Metal accessory box• Greasing pump• 1 hose holder fi tting• 2 washing sponges• Spray nozzle• Compressor• Tiltable mixer• 2L6 screw pump• 16+20 m air hose Ø 13 mm• 10+20 m material hose Ø 35 mm• 5 m material hose Ø 25 mm• Remote pneumatic control

Optional Accessories• Vibrating grid• Water metering • Remote electric control• High pressure jet cleaner• Vibrating device for riddle• IM 25 L screw pump

Hydraulic and pneumatic components

Liter counter Cable remote control Screw pump kits High pressure jet cleaner Radio control

Silent 300 Diesel engine - Lombardini Focs 1003/3 cil.

Motor power rate ISO 3046/1-IFN kW 15 (at 2400 rpm)

Compressor fl ow rate l/min 400

Max pumpable grain size mm 4-6 (2L6)

Variable theoretic fl ow rate l/min 0-60 (2L6)

Max pressure bar 40 (2L6)


Mixer capacity l 180

Dimensions width/length/h (mixer tilted) mm 1360/3340/1340

Weight kg 720

Sound pressure level dB (A) < 78

(*) Towing the machine on road depends on country regulations, check if this is permitted in your country.

ACCESSORIES

Advantages:Very high material fl ow rate, long pump distance – High pompable grain size – High capacity hopper provided with a vibrating grid: loading height fi tted for being charged with a traditional concrete mixer – Three-phase electric motor of high power 400V 50 Hz (with two speeds and material fl ow up to 35 l/min) and single-phase 230 V 50 Hz with exclusive Imer designed inverter and compressor (variable fl ow rate and up to 25 l/min) – Maximum safety for the operator: automatic stop of the paddles rotation and all moving parts if the protection grid or the vibrating riddle is removed.

Step 120 machine can be provided with a planetary mixer (optional) to mix quickly traditional mortar and pre-mixed plasters, making an integrated mixing and pumping unit.

Choose STEP 120:For spraying or pumping traditional mortar and pre-mixed plasters, fi bre-reinforced and refractory mortars, fi reproof materials, self-levelling screeds and for reinforcing injections at controlled pressure.

Standard Equipment• Electric supply panel with standard pneumatic remote control and

arranged for electric remote control• Motor (2,2 KW for single-phase version) (3,6/4,8 KW for three-phase

double speed version)• Rotor and Screw for traditional mortar (IM 25L)• Spraying gun for traditional/premixed mortar• Vibrating grid• Compressor (250 l/min for single-phase version) (310 l/min for three-

phase version)• 30 m (20+10) of hose Ø 35 for material with cam couplings• 31 m of air hose Ø 13 with quick couplings• Box of accessories for traditional mortar spraying

Optional Accessories• Planetary mixer (motor 1,1 KW – 400V / 1,4 KW – 230V), capacity

120 l, output per batch 90 l, loading height 1230 mm, provided with reversing mixing paddle system.

• Grid for premixed materials• Electric remote control with 33 m cable.• Rotor and Screw for premixed plasters (2L6).• Rotor and Screw for self-levelling screed (60.12).• Injection kit (spraying gun + pressure gauge+ pressure switch)• Tow bar at adjustable height + lighting equipment for towing on the

road (only in countries where it is allowed)

Screw pump for the traditional mortar and premixed materials

06

Step 120 with planetary mixer

Planetary mixer Grid for pre-mixed materials Spraying gun for Step 120 Injection kit for Step 120

ACCESSORIES

07(*) The pumping distance may vary depending on: the type of material used, pumping height, material consistency, type of pump installed.

Step 120 Supply - V 230-Hz 50 (with mixer) V 230-Hz 50 (without mixer) V 400-Hz 50 (with mixer) V 400-Hz 50 (without mixer)

Motor power kW 2,2 2,2 3,6 at 1 speed / 4,8 at 2 speed 3,6 at 1 speed / 4,8 at 2 speed

Compressor fl ow rate l/min 250 250 310 310

Compressor power rate kW 0,75 0,75 2,2 2,2

Screw pump speed (IM 25L) rpm 30/120 30/120 80/160 80/160

Max grain size (IM 25L) mm 8 8 8 8

Maximum fl ow rate l/min 25 25 35 35

Pumping horizontal distance (*) m 40 40 60 60

Pumping vertical distance (*) m 15 15 30 30

Mixer power rate kW 1,4 - 1,1 -

Mixer capacity l 120 - 120 -

Hopper capacity l 120 120 120 120

Weight kg 390 270 390 270

Dimensions width/length/h mm 820/2040/1275 820/2040/960 820/2040/1275 820/2040/960

Step 120 without planetary mixer

Advantages:Patented IMER gearmotor with direct transmission for high performance – High motor torque for optimum start-up with full load – Maximum safety for the operator: the automatic mixing lock is enabled when the mixing chamber is removed, in observance of EC regulations – Low sound emission levels – Ergonomic controls; Adjustable height (950,1095 and 1165 mm) – Easy to disassemble, clean and maintain – Easy to transport thanks to low bulk and weight, and to the perfect balance of the machine – In combination with a plaster sprayer or mortar pump, it can form a single mixing and pumping unit.

Choose Spin 15: Ideal for quickly mixing premixed plasters, masonry mortars,self-levelling materials and traditional pre-mixed materials in bags.

Standard Equipment• Single-phase motor 230V/50Hz• Electric control panel• Hopper with bag-breaker galvanized grid • Removable mixing chamber• Mixing shaft with wear-resistant steel paddles• Water system• 10-m water hose with quick couplings • Packing: in cardboard• Water pump (standard in the Spin 15 A version)

Continuous mixer for premixed materials

Spin 15 Spin 15 a Motor power rate kW 1.4 1.4

Mixer/paddle speed rpm 280 280

Hopper/tank capacity l 60 60

Mixing performance l/min 15-18 15-18

Standard water pump - no yes

Dimensions w/l/h mm 720/1380/1165-950 (max-min) 720/1380/1165-950 (max-min)

Packing dimensions w/l/h mm 800/590/830 800/590/830

Weight (with packing) kg 78 (82) 78 (82)

Sound pressure level dB(A) <65 <65

Patented IMER gearmotor

08Spin 15 A - water pump

NO LIMIT WITH PRE-MIXED MATERIALS IN BAGS

Plasters

Masonry mortars

Traditional screeds

Self-levelling screeds

Continuous mixer for premixed materials

Advantages:Gear motor with direct drive – High motor torque – Top quality components – Self-priming water pump with stainless steel casing and brass impeller – Electric panel with user friendly controls – Safety devices according to the latest CE standards – Complete with hooks and wheels for easy handling.

Choose Spin 30:to mix quickly premixed plaster, masonry mortar, binding mortar for tiles, self-levelling materials and traditional premixed screeds in bags. In combination with the mortar pump, the Spin 30 can form a single mixing and pumping unit.

Standard Equipment• Electric control panel• Hopper with bag-breaker galvanized grid • Removable mixing chamber• Mixing shaft with wear-resistant steel paddles• Self-priming water pump• Water system• Flow meter• 20 m electric supply cable• 20 m water hose Ø 3/4" with quick couplings

Innovative mixing unit for easy maintenance.

Safety device on mixing screw opening.

Optional Accessories: SPIN 30 blower hood

Spin 30 Supply - V 230 - Hz 50 V 400 - Hz 50

Motor power kW 2,2 3

Mixer speed rpm 280 280



Mixing performance l/min 30 30


Weight kg 130 130


09

Conventional pneumatic fl oor-screed conveyors with direct drive and automatic pumping cycle

10

Mover 190 eb

Cable and rope coilerswith scraping shovel

Ø 60 mm material hosewith fl ow coupling

Ø 65 mm material hosewith perrot couplings

Advantages:Automatic pumping cycle – Direct mixer drive for high performance and low maintenance – Air system fully protected – User friendly electric panel – Hatch with built-in safety valve – Wider wear-proof shields inside the mixing tank – Mixing paddles and their supports made of spheroidal cast iron for longer life – Higher slope (up to 65°) for the charging bucket with double effect hydraulic piston – Optional scraping shovel with compact cable and rope coilers.

Choose Mover 190 e / 270 e:for outstanding performance in conveying conventional fl oor-screed available with single phase and three phases motors.

Standard Equipment• Certifi ed pressure tank• Aggregate conveyor• Material outlet manifold Ø 60 mm• Mixer unit with gear motor• Electric control panel• 20 m electric cable• 135R13 wheels• Manual handling drawbar• Metal accessory box• Tank hatch seal• 2 hose holder fi ttings• Metal hose “U-shape” holder• 2 washing sponges• Tripod with Ø 60 mm coupling• 20+10 m material hose Ø 60 mm with cam couplings (MOVER 190E / 190EB)• 20+10+10 m material hose Ø 60 mm with cam couplings (MOVER 270E / 270EB)• Loading bucket with hydraulic power pack (MOVER 190EB / 270EB)

Optional Accessories• Scraper shovel kit• Ø 50 mm material hose with cam coupling • Ø 65 mm material hose with perrot coupling• Ø 60 mm material hose with fl ow coupling• Automatic lubrication system

Mover 190 e Mover 190 eb Supply - V 230 - Hz 50 V 230 - Hz 50

Mixer motor power rate kW 2,2 2,2

Power pack motor power rate kW - 0,75

Tank capacity l 190 190

Loading bucket - no yes


Average cycle output l 160 160

Max. transportable aggregate size mm 10/15 10/15

Dimensions width/length./h with bucket lifted mm 1150/1900/1450 1150/1900/2280

Weight kg 590 670


ACCESSORIES

11

Mover 270 eb

Automatic lubrication systemLoading bucket with cable and rope coilers for scaping shovel

Material hosewith cam coupling

Mover 270 e Mover 270 eb Supply - V 400 - Hz 50 V 400 - Hz 50

Mixer motor power rate kW 5,5 5,5

Power pack motor power rate kW - 1,5

Tank capacity l 270 270

Loading bucket - no yes


Average cycle output l 210 210

Max. transportable aggregate size mm 10/15 10/15

Dimensions width/length./h with bucket lifted mm 1150/2230/1450 1150/2230/2280

Weight kg 630 750


Conventional pneumatic fl oor-screed conveyors

Friendly use control panelPossibility of road certifi cationHatch for easyand safe handling

Optimised hatch grid Tripod standwith swivel coupling

Advantages:Built-in screw compressor (2600 l/min) – Low engine rpm (2400-2800 rpm) for less noise, consumption and maintenance – 27.5 kW diesel engine for one of the highest power rates in its class – Automatic pumping cycle: fully protected air system – Simplifi ed electric panel with controls within the operator’s reach – Hatch with built-in safety valve – Wider wear-proof shields inside the mixing tank– Paddles and their supports made of spheroidal cast iron for longer life – Loading bucket which can tilt up to 65° and has a descent control device which can also be operated when the machine is cold (Mover 190 db, Mover 190 dbr) – Motor bonnet with very high sound absorption – Automatic greasing system (optional) – 140 bar high pressure jet cleaner (optional) – Road towing kit available (optional).

Choose a MOVER 190 d / 190 db:for a compact-sized professional machine, fully autonomously, due to the diesel engine and built-in compressor.

Standard Equipment• Diesel engine and screw compressor• Screw compressor output 2600 l/min at 6 bar• Certifi ed pressure tank capacity 190 l• Control panel• 185 R14 tyres• Adjustable non road-towable drawbar (Mover 190 d / 190 db)• Road-towable drawbar, parking brake and light units (Mover 190 dr / 190 dbr)• Loading bucket (Mover 190 db / dbr)• 20+10+10 m hose for material Ø 60 mm with cam couplings• Tripod stand with coupling Ø 60 mm• 2 hose holder fi ttings• Metal hose holder• Aggregate conveyor• Material outlet manifold Ø 60 mm• Paddle mixer• Built-in hydraulic power system• Manual grease pump• Accessory box and accessories for cleaning hose Ø 60• Tank hatch seal

Optional Accessories• Scraping shovel kit• High pressure jet cleaner • Automatic lubricating system• Ø 50 mm hose kit with cam couplings • Ø 65 mm hose kit with perrot couplings• Ø 60 mm hose kit with threaded/fl ow couplings

Easy access to the engine

Automatic lubrication systemØ 65 mm material hose

with perrot coupling

12

ACCESSORIES

Mover 190 d Mover 190 db Mover 190 dr Mover 190 dbr Diesel engine - Lombardini LDW 1603 Lombardini LDW 1603 Lombardini LDW 1603 Lombardini LDW 1603

Motor power rate kW 27.5 27.5 27.5 27.5

Compressor fl ow rate l/min 2600 2600 2600 2600

Compressor max pressure bar 7 7 7 7

Tank capacity l 190 190 190 190

Loading bucket - no yes no yes

Loading height mm 950 435 950 435

Average cycle output l 160 160 160 160

Max transportable grain size mm 10/15 10/15 10/15 10/15

Road towing kit - no no yes yes

Dimensions width/length/h mm 1490/3705/1590 1490/3625/2390 with bucket raised 1490/4105/1590 1490/4025/2390 with bucket raised

Weight kg 1220 1320 1270 1370

Sound pressure level dB (A) < 87 < 87 < 87 < 87

Hose for materialwith cam coupling

Cable and rope coilers with scraping shovel High pressure jet cleaner

Loading bucket with cable andrope coilers for scaping shovel


13

Mover 190 dbr

Advantages:Built-in compressor with direct drive – Innovative double air fl ow rate for fuel saving (standard fl ow 4500 l/min – High fl ow 5200 l/min) – Low engine rpm (2400-2800 rpm) for low noise level, low fuel consumpion and low maintenance – Turbo charged diesel engine 48,5 kW – High effi cency screw compressor directly driven by engine – Automatic pumping cycle – Air system fully protected – User friendly electric panel – Hatch with built-in safety valve – Wider wear-proof shields inside the mixing tank – Paddles and their supports made of spheroidal cast iron for longer life – Higher slope (up to 65°) for the charging bucket with double effect hydraulic piston – Optional scraping shovel with compact cable and rope coilers – Engine hood with thick soundproofi ng coating – Optional greasing system – Optional 150 bar water jet cleaner – Road towing kit available.

Choose Mover 270 d:to have two machines in one just turning a level: low noise and fuel saving at 4500 l/min and high power at 5200 l/min.

Standard Equipment• Certifi ed pressure tank• Aggregate conveyor• Material outlet manifold Ø 60 mm• Mixer unit • Diesel engine and screw compressor• Control panel• 195R14 wheels• Tripod stand with Ø 60 mm coupling• 20+10+10 m material hose Ø 60 mm with cam couplings• Metal accessory box• Tank hatch seal• 2 hose holder fi ttings• Metal hose “U-shape” holder• 2 washing sponges• Non road-towable drawbar (MOVER 270D / 270DB)• Road-towable drawbar, parking brake and light units (MOVER 270DR / 270DBR)• Loading bucket (MOVER 270DB / 270DBR)

Optional Accessories• Scraper shovel kit• High pressure jet cleaner• Automatic lubrication system• Ø 50 mm material hose with cam coupling • Ø 65 mm material hose with perrot coupling• Ø 60 mm material hose with fl ow coupling

Friendly use control panelPossibility of road certifi cationHatch for easy and safe handling Optimised hatch grid Tripod stand with swivel coupling

Automatic lubrication systemØ 65 mm material hose

with perrot coupling

Conventional pneumatic fl oor-screed conveyors with innovative double air fl ow rates and automatic pumping cycle

14

ACCESSORIES

15

Hose for materialwith cam coupling

Cable and rope coilers with scraping shovel High pressure jet cleaner

Loading bucket with cable andrope coilers for scraping shovel


Mover 270 d Mover 270 db Mover 270 dr Mover 270 dbr Turbodiesel engine - Deutz BF3M2011 Deutz BF3M2011 Deutz BF3M2011 Deutz BF3M2011

Motor power rate kW 48,5 48,5 48,5 48,5

Compressor fl ow rate l/min 4500-5200 4500-5200 4500-5200 4500-5200

Compressor max. pressure bar 7 7 7 7

Tank capacity l 270 270 270 270

Loading bucket - no yes no yes

Loading height mm 950 435 950 435

Average cycle output l 210 210 210 210

Max. transportable aggregate size mm 10/15 10/15 10/15 10/15

Road towing kit - no no yes yes

Dimensions width/length./h mm 1490/4570/1430 1490/4570/2400 with bucket raised 1490/4570/1430 1490/4570/2400 with bucket raised

Weight kg 1530 1660 1670 1800

Sound pressure level dB (A) < 83 < 83 < 83 < 83

Mover 270 dbr

03

Concrete piston pump

16

Advantages:Two-cylinder piston pump with hydraulic control – 4-cylinder liquid-cooled diesel engine – Engines that meet the latest anti-pollution regulations – Well-soundproofed engine compartment – ANTI-SHOCK control panel with electromechanical controls – S-transfer valve with seal system and automatic wear takeup – Taper hopper to simplify cleaning operations – Openable and tiltable hopper for easy maintenance – Two-way hopper mixer – Pump with exclusive SOFT SPRITZ system to ensure ideal pumping conditions also at low fl ow rates – COOL FAST larger-sized cooling system for use in extreme conditions – Compact dimensions ideal for on-site transport and better handling.

Choose Booster 15: for pumping concrete, self-levelling fl oor screeds and for shotcreting.

Standard Equipment• 4-cylinder diesel engine• Hopper with agitator• Grid with 12 V vibrator• Hydraulic system with reversing• Pumping unit with S-transfer valve for automatic compensation of

clearance and wear• 4” Victaulic delivery manifold (Ø 100 mm) • Control panel with electromechanical controls• ON-OFF remote control via cable• End pipe clearing basket• Accessory box• Pipe cleaning equipment• Drawbar for non-towable version• Road-towable drawbar, parking brake and light units (road-towable version)

Optional Accessories• Automatic greasing system• High pressure jet cleaner • Pump for fast setting additive for shotcreting• ON-OFF radio control


Booster 15 Diesel engine - Lombardini FOCS 4 cil. Mod. 1404

Installed power rate kW 24,5

Pumping system - Two-cylinder with hydraulic control

Flow rate (*) m3/h 2-15

Pumping pressure bar 70

Max grain size mm 25

Pipe outlet - Victaulic 4"



Weight (towable version) kg 1400


Version for pumping• Concrete grid with agitator• 7 sections of 3 m iron pipe (4")• 1 section of 3 m rubber hose (4")• 2 90° elbows• 2 135° elbows• 12 Victaulic couplings• 13 seals for Victaulic couplings

Version for shotcreting• Grid with 15 mm mesh• Shotcrete gun for rubber hose Ø 50 mm• 30 (10+10+10) metres of rubber hose Ø 50 mm • 4" to Ø 50 mm reduction cone

17ANTI-SHOCK control panel S-transfer valve High pressure jet cleaner (optional)

The screw pump for self-levelling fl oor screeds

18

Advantages:High power – High fl ow rate – Long pumping distance – High capacity hopper fi tted with vibrating riddle – Maximum safety for the operator: all moving parts stop when the riddle is removed – Built-in low voltage remote control. Choose STEP 120 a: for pumping anhydrite-based or cement-based self-levelling screeds.

Standard Equipment• Electric supply panel• Electric remote control with 37 m of cable• 20 m supply cable• 7.5 kW motor • 60.12 screw-stator• Vibrating grid• 35 m of hose (20+10+5) DN50• Box with accessories

Optional Accessories• Height-adjustable drawbar+light units for towing on the road (only in

countries where it is allowed)

(*) The pumping distance may vary depending on: the type of material used, pumping height, material consistency, type of pump installed.

Step 120 a Supply voltage - 400 V 50 Hz

Motor power rate kW 7,5

Flow rate (aprox.) l/min 120

Max grain size mm 8-10

Max pumping distance m 60

Max pumping height m 30


Weight kg 280

Dimensions width/length/h mm 2320/820/960Control panel

Advantages:Powerful and silent 4-cylinder liquid-cooled diesel engine that meets the latest anti-pollution regulations – Operating speed: from 2400 to 2800 rpm for less wear, lower consumption levels, improved noiselessness – Variable displacement pump with closed circuit for higher output, lower consumption levels, lower oil heating – High capacity mixer – Grid opening safety sensor with automatic stopping of the mixer in the hopper – Simplifi ed control panel and controls within the operator’s reach – Standard hour meter (for work/maintenance/renting programme) – Two height-adjustable stabilisers for quick machine positioning on the site – Top cover tilting by gas springs for quickly inspecting inside the machine – Reduced and balanced weight simplifi es on-site handling – Optional 140 bar high pressure jet cleaner.

Choose SILENT 300 a:for pumping self-levelling fl oor screeds.

Choose SILENT 300 cl:for pumping self-levelling fl oor screeds. Version available for pumping grout and for shotcreting (max grain size 15 mm).

Standard Equipment• Hopper with agitator• Diesel engine• Variable displacement hydraulic pump• Control panel• 2 155R13 tyres• 2 adjustable stabilisers• 2 cyclist protection bars• Road towing kit (in countries where it is allowed)• Metal accessory box• Greasing pump• 1 hose holder fi tting• 2 washing sponges• Grid without vibrating device• Screw pump: 60.12 (Silent 300 a) – 1.5 L8 (Silent 300 cl)• 10+20 m material hose: Ø 50 mm (Silent 300 a), D60x81 (Silent 300 cl) • Remote electric control with 4 functions and 50 m of cable

Optional Accessories• High pressure jet cleaner• Vibrating device for Grid• Radio control• Shotcreting kit, DN65-DN50 reduction, 20+10m hose D50, shotcrete nozzle (Silent 300 cl)

Hydraulic and pneumatic components 19(*) The actual fl ow rate is signifi cantly affected by the type of product and by the pumping distance.(**) IMPORTANT NOTE: to ensure pumpability of grout with max grain size of 15 mm, check the pumpability and homogeneity of the material.

Silent 300 a Silent 300 cl Diesel engine - Lombardini Focs 1404/4 cil. Lombardini Focs 1404/4 cil.

Motor power rate ISO 3046/1-IFN kW 24,5 (at 3600 rpm) 24,5 (at 3600 rpm)

Max pumpable grain size mm 6-8 15**

Max. theoretic fl ow rate m3/h 13,5 24

Max. fl ow rate* m3/h appr. 9 appr. 15

Max pressure bar 20 20



Weight kg 670 720

Sound pressure level dB (A) < 78 <78

High pressure jet cleaner Radio control

Screw pumps for self-levelling fl oor screeds

Silent 300 a

Silent 300 cl

ACCESSORIES

20

Useful Addresses & Branch Offi ces

IMER International S.p.A.HeadquartersVia Salceto, 53/55 - 53036 Poggibonsi (Siena) ItalyPh. +39 0577 97341 - Fax +39 0577 983304

Mortar Spraying and Conveying Machinery DivisionVia delle Città, 194 - 50052 Certaldo (Florence) ItalyPh. +39 0577 97341 - Fax +39 0571 650013

MARKETING & SALES Riccardo Giannettoni: Sales [email protected]

Ilaria Cetta: MarketingPh. +39 0577 973401 - [email protected]

Export Sales Angela Rapini: Export Sales Manager Ph. +39 0577 973425 - [email protected] Fax +39 0577 932053

Giulia Asafova: Export Sales: Machines & Spare Parts Ph. +39 0577 973014 - [email protected] Fax +39 0577 932053

LOGISTICS Lorella Bianchini: Logistics Manager

Gloria MarcelliPaola RossiPh. +39 0577 973122Fax +39 0577 [email protected]

QUALITY & SERVICE Franco Borsatto: Service ManagerMortar Spraying and Conveying [email protected]

Desiderio LanciottiClaudio MaisanoPh. +39 0577 973326Fax: +39 0571 650013

CUSTOMER ACCOUNTS Gabriella FurrerPh. +39 0577 973430 - [email protected]

Sabina ScaringiPh. +39 0577 973452 - [email protected]

IMER ASIA46 Grove DriveSingapore 279086Ph. +65 6467 3348 - Fax +65 6468 2524

IMER DIRECT (GB) LTD.Tipton Road, TividaleWest Midlands B69 3HY UKPh. + 44 121 5225930 - Fax + 44 121 5225945www.imerdirect.com

IMER FRANCE S.A.ZI Les Speyres BP 34 38450Vif - FrancePh. +33 476 725269 - Fax +33 476 725269www.imer.fr

IMER IBERICAPolígono EmpresariumCalle Lentisco, n° 7-950720 La Cartuja Baja (Zaragoza)Ph. +34 976 125256 - Fax +34 976 125138www.imeriberica.com

IMER LATINOAMERICA Y EL CARIBE, INC9383 NW 13th StreetMiami, FL 33172 - USAPh. +1 305 5939890 - Fax +1 305 6752260www.imerlc.com

IMER - L&T4 Sokak No 47/aOrg. San. Böl. - Aksaray - TurkeyPh. +90 312 4403737 - Fax +90 312 4403630www.imer-lt.com.tr

I.M.E.R MarocRésidence Moulay Youssef 54 Bd Moulay Youssef - H5G 20 000 Casablanca - MoroccoPh. +212 22470357 - Fax +212 22470378

IMER MIDDLE EASTP.O BOX 110-122Youssef El Hani StreetBeirut - LebanonPh. +961 1 564979 - Fax +961 1 564979www.imermiddleeast.com

IMER USA, INCIMER West3654 Enterprise Ave94545 Hayward, CA - USAPh. +1 510 6707970 - Fax +1 510 7834255www.imerusa.com

IMER East221 Westhampton Place20743 Capitol Heights, MD USAPh. +1 301 3363700 - Fax +1 301 3366687www.imerusa.com

IG RUSSIA 000Ulitsa Tverskaya 24, Bldg. 1125009 MoscowPh. +7 495 6990352 - Fax +7 495 6998938www.ig-russia.ru

IMER International SpAVia Salceto, 53 - 5553036 Poggibonsi (Siena) ItalyPh. +39 0577 97341fax +39 0577 983304www.imergroup.com

RIF

. 11/

2008

Date post:	17-Feb-2016
Category:	Documents
Upload:	totalener-lda
View:	215 times
Download:	2 times

_completo_IMER_MPT_catalogo_0809_EN

Documents