Component List for SKF Lubrication Systems Products

File name: Project_Book_2-4_SKF.pdf

Original date: 01-October-2010

Revised date: 26-June-2017 Page 1 of 72

Component List for SKF Lubrication System Products

Original date: 01-October 2010

Revised Date: 26-June-2017

Version No.: 2.4




Scope of the Document

This document contains product information to be used for the selection of components for FGA E&T FCA (NAFTA) programs. This document provides a basic guide to selecting the correct type of lubrication system for the correct application. It also provides the necessary contact information to assist in application engineering, program management review and stocking locations for ease of purchasing.

All information contained in this document is superseded by the requirements of the FGA E&T FCA (NAFTA) Global Specification.

A current and accurate copy of the specification can be obtained from the following web addresses:

http://supplierinfo.fiatpowertrain.com

https://gsp.extra.chrysler.com/mfg/amedd/powertrain.htm

http://www.skf.com/group/products/lubrication-solutions/lubrication-system-components/specifications-of-the-automotive-industry/index.html

Document Management Information

Any printed copy is an uncontrolled copy. The user shall verify with the project engineer that they are using the appropriate version of the specification for the specific project they are working on.

Any questions or comments with respect to this specification should be directed to the project engineer for the specific project in question.

Revision Table

Revision Date DD-Month-

YYYY

Version No.

Document Name Revision Description Paragraph

Affected Revised By

01-October-2010 1 Original Release R. Gomez, Eva

M Tausend

02-February-2011 1.1

FluidPower FPT CPT

SKF Project Book

Version 1.1.pdf

Minor formatting changes - Added KFB1-M-W-XXX - Added ETP unit - Added check valves for progressive feeders - Connectors for cycle switches - Minor drawing revision

2.2.5, 3.10 2.5.4, 3.7 2.11, 3.29 2.12.4, 2.12.5, 3.21.1 3.5.1

D. Schultz

03-February-2012 1.2

FluidPower FPT CPT

SKF Project Book

Version 1.2.pdf

Correction made to 3/4” female quick coupling read 995-001-521, which is 3/4” male, changed to 995-001-519

2.17.2

R. Reynolds




Revision Date

DD-Month-YYYY

Version No.


Affected Revised By

27-June-2012 1.3

FluidPower FPT CPT SKF Project Book Version 1.3.pdf

Replaced all FPT logo with new FP logo as requested by John H Janssen Jr. Chrysler LLC revised voltage code +564 to +1FV, and added note” FP projects in China use voltage code +1FW

3.0 R. Reynolds

01-October-

2012 1.4

FluidPower FPT CPT SKF Project Book Version 1.4.pdf

Added note” FP projects in Brazil use voltage code +MGD as requested by Mr. Giuliano of Fiat

R. Reynolds

19-December-

2012 1.5

Added missing technical drawings for all Revised contact to Mr. Angelo Giuliano

1.1

R. Reynolds

26-March-2013 1.6

Added order form as requested dy Dario Canevari of Fiat, and other general updates

R. Reynolds

19-June-2013 1.7

Fiat Powertrain is now Fiat Group Automobiles S.p.A Engine and Transmission, replaced old logo & company name with new on all pages

R. Reynolds

12-December-

2013 1.8

FCA_SKF_ Project_Book_

version_1_8.pdf

- Removed MFE1-BW* Pumps - Added 3D model - Updated filter part numbers - Added Orsco information - Modified drawing for legibility - Updated quick disconnect part numbers - Removed MFE1-BW* pumps - Added link to technical data brochure - Changed drawing - Added quick disconnect note - Added link to technical data brochure - Added link to technical data brochure - Added link to technical data brochure - Updated filter part numbers - Added link to technical data brochure - Added Orsco Drawings

2.4 2.5.3 2.17.1 2.24 3.1.7 3.3 3.6 3.7 3.8 3.10 3.12.1-3.22 3.26, 3.27 3.30-3.34 3.37 3.41, 3.42 3.44-3.46

S. Moninger




Revision Date

DD-Month-YYYY

Version No.


Affected Revised By

24-November-

2014 1.9


version_1_9.pdf

- Removed Fiat logo. Added new FCA logo. - Added VTEC Vectolub full modular eMQL - Added AC-3790-C2 VectoLub spray nozzle - Added MOD-032 VectoLub reservoir assembly - Added VTEC-522915 technical drawing - Added AC-3790-C2 technical drawing - Added MOD-032-NC technical drawing

All 2.24 2.24 2.24 3.46 3.47 3.48

R. Reynolds

1-July-2015 2.0


version_2_0.pdf

- Removed Chrysler logo - Changed contacts to Mr. Mauro Falletti and Mr. Christian Heider updated FP and CPT to FCA (EMEA, LATAM, APAC) and FCA (NAFTA) - Updated FP and CPT to FCA (EMEA, LATAM, APAC) and FCA (NAFTA) - Changed image to match part number - Changed drawing to match part number - Changed drawing to FCA version of VSR system

All 1.1 2.1-2.5, 2.18, 2.22, 2.24, 3.0, 3.1, 3.6, 4.0 2.14 3.28 3.44

S. Moninger

4-December-

2015 2.1


version_2_1.pdf

- Updated contact information for Mr. Christian Hieder - Corrected note for grease filter - Changed part number to DSC3-A100K-3A2B, corrected temperature range - Removed part number - Removed drawing added link to brochure - Removed drawing - Removed drawing added link to brochure

1.1 2.3.2 2.14.1 2.14.2 3.23-3.25 3.28 3.29, 3.39, 3.40, 3.43

S. Moninger




Revision Date

DD-Month-YYYY

Version No.


Affected Revised By

26-May-2016 2.2

FCA_SKF_ Project_Book_ version_2_2.pd

- Revised format of revision table - Moved Contact List before Table of Contents and updated contacts - Updated Contact List with FCA Engineering Contacts - Updated format and hyperlinks - Removed hydraulic symbols - Added part number for units with ultrasonic level swtich (BWU*/KWU*)

- Added ultrasonic level switch - Corrected quick coupler descriptions - Removed dimension data and drawing - Removed drawing and added hyperlink to brochure - Renumbered sections as required

1

1.1

TOC 2 2.1, 2.2.1 2.2.2, 2.3, 2.42.15 2.18 3.4, 3.5, 3.6

3.36, 3.37, 3.46, 3.47

All

S. Moninger

18-November-

2016 2.3


- Updated maximum pressure specification - Updated part number to match catalog - Updated picture of ultrasonic level switch - Updated maximum back pressure - Added drawing of MFE5-KWU3-C100 - Deleted drawing of MFE5-BW3-C100 - Deleted drawing of MFE5-KW3-F100 - Deleted drawing of MFE5-BW3-F100 - Updated drawing of ultrasonic level switch

2.1.1-2.1.4, 2.3.1, 2.3.2 2.5.4

2.15

3.1 3.1.4

3.1.4

3.1.5

3.1.6

3.29

S. Moninger




Revision Date

DD-Month-YYYY

Version No.


Affected Revised By

26-June-2017 2.4


-Updated picture to clear reservoir -Updated picture -Updated picture -Updated picture -Updated picture -Updated picture -Updated picture -Updated picture -Updated picture -Updated picture -Updated picture -Updated picture and notes -Updated picture and notes -Cleaned up format -Updated drawing -Removed ETP compact greaser -Updated format

2.2.1-2.2.2 2.2.3 2.5.3 2.8.1-2.8.3 2.12.1-2.12.3 2.12.4 2.13.1 2.18.1-2.18.2 2.19.1-2.19.3 2.20.1 2.21.1-2.21.5 2.22.1-2.22.3 2.23.1-2.23.2 3.1 3.1.1-3.1.2 3.7 Order Form

S. Moninger

1 SKF Lubrication System Persons to Contact

NAFTA EMEA Name Frank Casinelli Uwe Lipinski

Company SKF Lubrication Business Unit SKF Lubrication Systems Germany GmbH

Address 15918 Patriot Ln. Macomb, MI 48044

Motzener Straße 35/37 – 12277 Berlin – Germany

Phone 248-982-7411 01149-30-72002265Fax 01149-30-72002481

Email [email protected] [email protected]

APAC LATAM Name Frank Allgeier Dennis Heil

Company SKF Lubrication Systems Japan Ltd. SKF Lubrication Systems Germany GmbH

Address 2-16-20 Hishie Higashi-Osaka, 578-0984 Japan

Motzener Straße 35/37 – 12277 Berlin – Germany

Phone +81 (0)72 964 5055 +49 30 72002520 Fax +81 (0)72 964 1619

Email [email protected] [email protected]




1.1 FCA (EMEA, LATAM. APAC) and FCA (NAFTA) Contacts

FCA EMEC, LATAM, APAC Roberto Oliva E-Mail: [email protected] Phone: +39 3346543687

FCA NAFTA Brian Maynard E-Mail: [email protected] Phone: +1 (313) 423-7006




Table of Contents

Document Management Information ............................................................................................................. 2

1 SKF Lubrication System Persons to Contact ............................................................................................. 6

1.1 FCA (EMEA, LATAM. APAC) and FCA (NAFTA) Contacts .................................................................... 7

Table of Contents .......................................................................................................................................... 8

2.0 List of Components ............................................................................................................................... 11

2.1 Pumps for Single Line Parallel Piston Distributors for Oil ................................................................. 11

2.2 Pumps for Single Line Parallel Piston Distributors for Fluid Grease ................................................. 13

2.3 Pumps for High Speed Spindle Lubrication Oil + Air ........................................................................ 14

2.4 Pumps for Progressive Systems for Oil ............................................................................................. 15

2.5 Piston Pumps for Progressive Systems for Grease .......................................................................... 16

2.6 Single Line Parallel Piston Distributors for Oil ................................................................................... 17

2.7 Single Line Parallel Piston Distributors for Fluid Grease .................................................................. 18

2.8 Manifolds for Single Point Piston Distributors ................................................................................... 19

2.9 Oil + Air Metering Units ..................................................................................................................... 19

2.10 Progressive Feeders ....................................................................................................................... 20

2.11 Check Valves for Progressive Feeders ........................................................................................... 21

2.12 Cycle Switches and Connector for Progressive Feeders ................................................................ 22

2.13 Over Pressure Indicators for Progressive Feeders ......................................................................... 22

2.14 Electronic Pressure Switch .............................................................................................................. 23

2.15 Ultrasonic Level Switch with I/O Link .............................................................................................. 23

2.16 Flow Monitors for Piston Distributor Systems ................................................................................. 23

2.17 Oil + Air Streak Sensor .................................................................................................................... 24

2.18 Filter ................................................................................................................................................. 24

2.19 Quick Disconnect Coupling – FCA (NAFTA) ONLY! ....................................................................... 25

2.20 Glycerine Filled Pressure Gauges ................................................................................................... 26

2.21 Solenoid Valves ............................................................................................................................... 26

2.22 Vario Units for MQL Systems .......................................................................................................... 28

2.23 Digital Super Units for MQL Systems .............................................................................................. 29

2.24 Aerosol Monitor for MQL Systems .................................................................................................. 29

2.25 Oil/Air for Part Lubrication ............................................................................................................... 30

3.0 Technical Information and Drawings ..................................................................................................... 31

3.1 MFE Pumps for Piston Distributors Systems for Oil .......................................................................... 31




3.1.1 Standard Dimensions of Reservoirs: 3, 6 and 15 liter (all dimensions are in mm) ........................ 32

3.1.2 Standard Dimensions of Reservoirs: 30 and 50 liter (all dimensions are in mm) .......................... 33

3.1.3 MFE5-KW3-C100 ........................................................................................................................... 34

3.1.4 MFE5-KWU3-C100 ......................................................................................................................... 35

3.1.5 P-886-BWW-C100 .......................................................................................................................... 36

3.2 Angle Bracket for Filter Assembly ..................................................................................................... 37

3.3 Quick Disconnect Coupling ............................................................................................................... 38

3.4 Glycerine Filled Pressure Gauges ..................................................................................................... 39

3.5 MFE Pumps for Piston Distributors for Fluid Grease ........................................................................ 40

3.5.1 MFE2-KW*F-C100 .......................................................................................................................... 41

3.6 MF Pumps for Progressive Systems ................................................................................................. 42

3.6.1 MF1-BW*-C100 .............................................................................................................................. 43

3.7 KFG1-5W2*-V71+924 Piston Pump for Progressive Systems for Fluid Grease ............................... 44

3.8 KFG1-5W1*-V71+924 Piston Pump for Progressive Systems for Grease ....................................... 45

3.9 KFB1-M-W+924 ................................................................................................................................. 46

3.10 KFA1-M-WA-V71+924 Pumps for Progressive Systems for Grease .............................................. 47

3.11 Piston Distributor 341 and Manifolds ............................................................................................... 48

3.12 Piston Distributor 342, 343, 345 Series ........................................................................................... 48


3.14 Piston Distributor 352, 353, 355 Series ........................................................................................... 48


3.16 Piston Distributor 392, 393 Series ................................................................................................... 48

3.17 Oil + Air Mixing Valves MV20X-100-XXXXXXXX ............................................................................ 48

3.18 Progressive Feeder VPG ................................................................................................................ 48

3.19 Progressive Feeder VPKG .............................................................................................................. 48

3.20 Progressive Feeder VPBG .............................................................................................................. 48

3.21 Modular Feeder PSG2 .................................................................................................................... 48

3.22 Cycle Switch 177-300-094 for VP and PSG Progressive Feeders ................................................. 48

3.23 Cycle Switch 177-300-095 for VPK Progressive Feeders............................................................... 48

3.24 Cycle Switch 177-300-097 for VPB Progressive Feeders............................................................... 49

3.25 Cycle Switch Connectors for Progressive Feeders ......................................................................... 49

3.26 Overpressure Indicators for Progressive Feeders .......................................................................... 49

3.27 Pressure Switches ........................................................................................................................... 49

3.28 Ultrasonic Level Switch ................................................................................................................... 50




3.29 Flow Monitor GS300 ........................................................................................................................ 51

3.30 Oil + Air Streak Sensor GS4011-S XX............................................................................................. 51

3.31 2/2 Way Directional Valve for Oil and Grease 161-110-031+924 ................................................... 51

3.32 3/2 Way directional Valve for Oil and Grease 161-120-064+924 .................................................... 51

3.33 4/2 Way Directional Valve for Oil 161-140-050+924 ....................................................................... 51

3.34 Zero Leakage 2/2 Way Valve for Oil VPG VEN-V71A+924 ............................................................ 52

3.35 Zero Leakage 2/2 Way Valve with Union Block VPG-VEN-V71+924 ............................................. 53

3.36 Filter ................................................................................................................................................. 54

3.37 Check Valves for Progressive Feeders ........................................................................................... 55

3.38 Lubrilean Vario UFV10-014-2 .......................................................................................................... 55

3.39 Lubrilean Vario Plus UFV10-019-2 .................................................................................................. 55

3.40 Lubrilean Vario Super ...................................................................................................................... 55

3.41 Lubrilean Digital Super .................................................................................................................... 55

3.42 Lubrilean Aerosol Monitor AM1000 ................................................................................................. 55

3.43 VSR System for Part Lubrication with External Controls ................................................................ 56

3.44 LGPTN Spray Nozzle Assemblies for Oil/Air .................................................................................. 57

3.45 VTEC 522915, VectoLub Full Modular External MQL System ....................................................... 58

3.46 AC-3790-C2 VectoLub Spray Block with Nozzle Assembly ............................................................ 59

3.47 MOD-032 VectoLub 6 Liter Plastic Reservoir Assembly ................................................................. 59

Order Form .............................................................................................................................................. 60




Return to Table of Contents

2.0 List of Components

2.1 Pumps for Single Line Parallel Piston Distributors for Oil

Photo Order Code Description Reservoir Notes

2.1.1

MFE5-KW3-C100+1FV MFE5-KW6-C100+1FV

MFE5-KWU3-C100+1FV MFE5-KWU6-C100+1FV

FCA (NAFTA) only Gear pump for oil Flow rate: 0.5 l/min Pressure: 28 bar Electrical: 220-240 / 380-420V @ 50 Hz; 254-280 / 440-460V @ 60 Hz; both ±5%, UL CSA

3l plastic reservoir 6l plastic reservoir


FCA (NAFTA) ONLY Quick fill to be ordered separately, see section 3.3 Standard components: - Filter w/ dirt indicator - Pressure gauge - Low level float switch or ultrasonic level switch with I/O link (-KWU*) units - Breather

2.1.2

MFE5-BW3-C100+1FV MFE5-BW7-C100+1FV

MFE5-BW16-C100+1FV MFE5-BW30-C100+1FV MFE5-BW50-C100+1FV

MFE5-BWU3-C100+1FV MFE5-BWU7-C100+1FV

MFE5-BWU16-C100+1FV MFE5-BWU30-C100+1FV MFE5-BWU50-C100+1FV

FCA (NAFTA) only Gear pump for oil Flow rate: 0.5 l/min Pressure: 28 bar Electrical: 220-240 / 380-420V @ 50 Hz; 254-280 / 440-460V @ 60 Hz; both ±5%, UL CSA

3l metal reservoir 6l metal reservoir 16l metal reservoir 30l metal reservoir 50l metal reservoir 3l metal reservoir 6l metal reservoir 16l metal reservoir 30l metal reservoir 50l metal reservoir


2.1.3

MFE5-KW3-F100+140 MFE5-KW6-F100+140

MFE5-KWU3-F100+140 MFE5-KWU6-F100+140

FCA (EMEA, LATAM, APAC) only Gear pump for oil Flow rate: 0.5 l/min Pressure: 28 bar Electrical: 400V, 3PH, 50Hz



FCA (EMEA, LATAM, APAC) ONLY Standard components: - Filter w/ dirt indicator - Pressure gauge - Low level float switch or ultrasonic level switch with I/O link (-KWU*) units - Breather





2.1.4

MFE5-BW3-F100+140 MFE5-BW7-F100+140

MFE5-BW16-F100+140 MFE5-BW30-F100+140 MFE5-BW50-F100+140

MFE5-BW3-F100+140 MFE5-BW7-F100+140

MFE5-BW16-F100+140 MFE5-BW30-F100+140 MFE5-BW50-F100+140

FCA (EMEA, LATAM, APAC) only Gear pump for oil

Flow rate: 0.5 l/min Pressure: 28 bar

Electrical: 400V, 3PH, 50Hz

3l metal reservoir 6l metal reservoir 16l metal reservoir 30l metal reservoir 50l metal reservoir 3l metal reservoir 6l metal reservoir 16l metal reservoir 30l metal reservoir 50l metal reservoir


2.1.5

P-886-BWW7-C100 P-886-BWW16-C100

P-886-BWU7-C100

P-886-BWU16-C100

FCA (NAFTA) only Piston pump for oil Volume/stroke: 30cc Oil press max: 25 bar Air press max: 10 bar

7l metal reservoir 16l metal reservoir






2.2 Pumps for Single Line Parallel Piston Distributors for Fluid Grease


2.2.1

MFE2-KW3F-C100+1FV MFE2-KW6F-C100+1FV

MFE2-KWU3F-C100+1FV MFE2-KWU6F-C100+1FV

FCA (NAFTA) only Gear pump for fluid grease Flow rate: 0.2 l/min Pressure: 38 bar Electrical: 220-240 / 380-420V @ 50 Hz; 254-280 / 440-460V @ 60 Hz; both ± 5%, UL CSA



FCA (NAFTA) ONLY Quick fill to be ordered separately. See section 3.3. Use with 213-900 grease filter in section 2.17 -KWU* units include ultrasonic level switch w/ IO link

2.2.2

MFE2-KW3F-F100+140 MFE2-KW6F-F100+140

MFE2-KWU3F-F100+140 MFE2-KWU6F-F100+140

FCA (EMEA, LATAM, APAC) only Gear pump for fluid grease Flow rate: 0.2 l/min Pressure: 38 bar Electrical: 400V, 3PH, 50Hz



FCA (EMEA, LATAM, APAC) ONLY USE with 213-900 grease filter in section 2.17 -KWU* units include ultrasonic level switch w/ IO link

2.2.3

KFB1-M-W+924

Gear pump for fluid grease unit for 5 to 15 points Max flow rate: 50cm³/min Pressure: 38 bar Electrical: 24 VDC 1.4l plastic reservoir FCA (NAFTA) ONLY





2.3 Pumps for High Speed Spindle Lubrication Oil + Air


2.3.1

MFE5-KW3-C100+1FV 3 phase motor

MFE5-KWU3-C100+1FV

3 phase motor

FCA (NAFTA) only Gear pump for oil

Flow rate: 0.5 l/min Pressure: 28 bar

Electrical: 220-240 / 380-420V @50 Hz 254-280 / 440-460V @ 60 Hz; both

± 5%, UL/CSA

3l plastic reservoir


FCA (NAFTA) ONLY Quick fill to be ordered separately. See section 3.3 Standard components: - Filter w/ dirt indicator - Pressure gauge - Low level float switch or ultrasonic level switch with I/O link (-KWU*) units - Breather

2.3.2

MFE5-KW3-F100+140 3 phase motor

MFE5-KWU3-F100+140

3 phase motor

FCA (EMEA, LATAM, APAC) only

Gear pump for oil Flow rate: 0.5 l/min Pressure: 28 bar

Electrical: 400V, 3PH, 50Hz








2.4 Pumps for Progressive Systems for Oil


2.4.1

MF1-BW7-C100+1FV

MF1-BWU7-C100+1FV

FCA (NAFTA) only For circulating systems Flow rate: 0.1 l/min Pressure: 60 bar Electrical 220-240 / 380-420V @ 50Hz; 254-281 / 440-460V @ 60 Hz; both ±5%, UL/CSA

6l metal reservoir

6l metal reservoir

FCA (NAFTA) Quick fill to be ordered separately. See section 3.3. -BWU7 units included ultrasonic level switch w/ I/O link

2.4.2

MF1-BW7-F100+140

MF1-BWU7-F100+140

FCA (EMEA, LATAM, APAC) only for circulating systems Flow rate: 0.1 l/min Pressure: 60 bar Electrical: 400V, 3PH, 50Hz

6l metal reservoir

6l metal reservoir

FCA (EMEA, LATAM, APAC) ONLY -BWU7-units include ultrasonic level switch w/ I/O link





2.5 Piston Pumps for Progressive Systems for Grease

Photo Order Code Description Notes

2.5.1

KFG1-5W2A-V71+924 KFG1-5W2B-V71+924 KFG1-5W2C-V71+924 KFG1-5W2D-V71+924

Q = 2.5 cm³/min Q = 1.8 cm³/min Q = 1.3 cm³/min Q = 0.8 cm³/min Electric piston pump for grease 24 VDC

Quick fill to be ordered separately. See section 3.3

2.5.2

KFG1-5W1GA-V71+924 KFG1-5W1GB-V71+924 KFG1-5W1GC-V71+924 KFG1-5W1GD-V71+924

Q = 2.5 cm³/min Q = 1.8 cm³/min Q = 1.3 cm³/min Q = 0.8 cm³/min Electric piston pump for grease 24 VDC


2.5.3

KFA1-M-WA-V71+924 KFA1-M-WA-V71+924 KFA1-M-WA-V71+924

Q = 2.0 cm³/min Q = 1.5 cm³/min Q = 1.0 cm³/min Electric piston pump for grease 24 VDC


FCA (NAFTA) ONLY





2.6 Single Line Parallel Piston Distributors for Oil


2.6.1

341-1XX-X0000-00 351-0XX-X0000-00 391-0XX-X0000-00

Single piston distributor for oil 0.01 to 0.16 cm³ 0.05 to 0.60 cm³ 0.20 to 1.50 cm³

2.6.2

342-4XX-XX000-XX 343-4XX-XXX00-XX 345-4XX-XXXXX-XX

Standard piston distributor for oil

2.6.3 352-0XX-XX000-XX 353-0XX-XXX00-XX 355-0XX-XXXXX-XX

Standard piston distributor for oil

2.6.4 392-000-XX000-XX 393-000-XXX00-XX Standard piston distributor for oil





2.7 Single Line Parallel Piston Distributors for Fluid Grease


2.7.1

341-7XX-X0000-00 351-1XX-X0000-00 391-100-X0000-00

Standard piston distributor for fluid grease 0.01 to 0.16 cm³ 0.05 to 0.60 cm³ 0.10 to 0.30 cm³

2.7.2

342-5XX-XX000-XX 343-5XX-XXX00-XX 345-5XX-XXXXX-XX

Standard piston distributor for fluid grease

2.7.3 352-1XX-XX000-XX 353-1XX-XXX00-XX 355-1XX-XXXXX-XX


2.7.4 342-100-XX000-XX 343-100-XXX00-XX






2.8 Manifolds for Single Point Piston Distributors


2.8.1

VL-0XAAG1 VL-0XAAG2 VL-0XAAM1 VL-0XAAM2

G1/8 G1/4 M10X1 M14X1.5 Manifolds for 341 series

To be used with 341 single piston distributors

2.8.2

VL-0XBAG1 VL-0XBAG2 VL-0XBAM1 VL-0XBAM2



2.8.3

VL-0XCAG1 VL-0XCAG2 VL-0XCAM1 VL-0XCAM2



2.9 Oil + Air Metering Units


2.9.1

MV20X-100-XXXXXXXX Oil+Air metering unit For use in Oil+Air systems using the MFE5-KW3-

C100+1FV





2.10 Progressive Feeders

Photos Order Code

Description Notes

2.10.1

VPG

Progressive sectional feeder Metered quantity of lubricant 0.1-1.2 cm³/stoke Threaded inlet port: G1/4 Threaded outlet port: G1/8

2.10.2

VPKG


2.10.3

VPBG

Progressive block feeder Metered quantity of lubricant 0.2 cm³/stoke Threaded inlet port: G1/8 Threaded outlet port: G1/8

2.10.4

PSG2






2.11 Check Valves for Progressive Feeders

Photo Order Code

Description Notes

2.11.1

VPG-RV VPG-RV6 VPG-RV8

G1/8, 4mm, 10 bar G1/8, 6mm, 10 bar G1/8, 8mm, 10 bar

With sleeve fitting and compression nut 2.11.2

VPKG-RV G1/8, 6mm, 3 bar

2.11.3

VPKG-RV-VS G1/8, 6mm, 3 bar Quick connection





2.12 Cycle Switches and Connector for Progressive Feeders


2.12.1

177-300-094 3 wire cycle switch for VP/PSG NC contact, connection M12X1

2.12.2 177-300-095 3 wire cycle switch for VPK NC contact, connection M12X1

2.12.3 177-300-097 3 wire ccyle switch for VPB NC contact, connection M12X1

2.12.4

179-990-600 Straight socket with 5 meter cable for 177-300-094, 177-300-095 and 177-990-097 cycle switches 4 pole; UL/CSA approved

179-660-601 Straight socket with 5 meter cable for 177-300-094,

177-300-095 and 177-990-097 cycle switches 4 pole; UL/CSA approved

2.13 Over Pressure Indicators for Progressive Feeders

Photo Order Code Description Notes 2.13.1

VPG-UE16-2 VPG-UE32-2 VPG-UE63-2 VPG-UE80-2

VPG-UE100-2 VPG-UE50-3

VPG-UE100-3 VPG-UE150-3 VPG-UE200-3

16 bar - 232 psi - 1.6 MPa 32 bar - 464 psi - 3.2 MPa 63 bar - 915 psi - 6.3 MPa 80 bar - 1160 psi - 8 MPa

100 bar - 1450 psi - 10 MPa 50 bar - 725 psi - 5 MPa

100 bar - 1450 psi - 10 MPa 150 bar - 2175 psi - 15 MPa 200 bar - 2900 psi - 20 MPa





2.14 Electronic Pressure Switch


2.14.1 DSC3-A100K-3A2B

Electronic pressure switch Rated pressure: Max 100 bar

Permissible overpressure 200 bar Ambient and fluid temperature

range: -25 to 80°C IP 67 rating

M12X1, 4-pins

2.15 Ultrasonic Level Switch with I/O Link


2.15.1 995-800-135

Ultrasonic level switch w/ I/O link Outputs: NO/NC, PNP & I/O link

Sensing range: 25-400 mm Blind zone: 25 mm

IP 67 rating

M12x1; 4 - pins

Alternative for WS35-XXX, BK6.U117-V57, BK6.U118-V57 level switches

2.16 Flow Monitors for Piston Distributor Systems


2.16.1 GS300 24 VDC

Flow Range: 0.01 - 0.6 cc/cycle





2.17 Oil + Air Streak Sensor


2.17.1

GS4011-S20 GS4011-S50

Oil+Air streak sensor 120 - mm³/hr Oil+Air streak sensor 60 - 120 mm³/hr

2.18 Filter


2.18.1

169-460-099-V57 169-460-087-V70

169-460-185

3 µm Oil 10 µm Oil 25 µm Oil

Oil pressure line with electrical clogging indicator, 24 VDC, M12X1,

4 - pin connector

2.18.2

213-900

25 µm Grease Screen filter for grease

Flow rate: 2l/min Maximum operating pressure: 45 bar

Connection: M14X1.5





2.19 Quick Disconnect Coupling – FCA (NAFTA) ONLY!


2.19.1

995-003-534 995-003-527 995-003-528

3/8" 5/8" 3/4"

Complete quick disconnect with coupler, strainer, and housing

FCA (NAFTA) ONLY All quick disconnects must be approved by AME controls engineering and chemical management See section 3.3

2.19.2

995-003-529 992-002-096 995-003-530 995-003-531 995-003-532 995-005-088 995-005-096 995-005-097 995-003-533 995-005-521

1/8" 1/4" 3/8" 1/2" 3/4" 1/8" 1/4" 3/8" 1/2" 3/4"



2.19.3

995-001-228 995-003-517 995-001-227 995-003-518

3/8" 1/2" 3/8" 1/2"







2.20 Glycerine Filled Pressure Gauges

Photo Order Code Description Notes 2.20.1

169-104-015 169-110-015 169-125-015

0-40 bar / 0-580 psi / 0-4 MPa 0-100 bar / 0-1450 psi / 0-10 MPa 0-250 bar / 0-3625 psi / 0-25 MPa Glycerine pressure gauge, G1/4

Scale in MPa, psi and bar

2.21 Solenoid Valves


2.21.1

161-110-031+924 2/2 way valve

For oil and grease

2.21.2

VPG-VEN-V71A+924 2/2 way valve

For oil

2.21.3

VPG-VEN-V71+924

2/2 way zero leakage valve with union block for remote mounting

For oil





2.21.4

161-120-064+924 3/2 way valve

For oil and grease

2.21.5

161-140-050+924 4/2 way valve

For oil





2.22 Vario Units for MQL Systems


2.22.1

UFV10-014-2

Lubrilean Vario 1.8 liter capacity

Internal or external lubrication Compressed air: Minimum: 6 bars Optimal: 8 bars

Maximum: 10 bars Manual slide valve actuation

Can be used with SKF LubriOil of SKF LubriFluid See brochure:

1-5102-EN

2.22.2

UFV10-019-2

Lubrilean Vario Plus 1.8 liter capacity


Maximum: 10 bars 24 VDC actuation

Level monitoring for 4 points


1-5102-EN

2.22.3

UFV30-003

Lubrilean Vario Super 1.8 liter capacity


Maximum: 10 bars 24 VDC actuation

Level monitoring for 4 points Pressure monitoring


1-5102-EN





2.23 Digital Super Units for MQL Systems


2.23.1

UFD10-020

Lubrilean Digital Super 1.8 liter capacity Internal or external lubrication Compressed air: Minimum: 6 bars, Optimal: 8 bars, Maximum: 10 bars 24 VDC actuation Level monitoring for 4 points, Pressure monitoring, flow sensor

Requires FCA (EMEA, LATAM, APAC) FCA (NAFTA) controls engineering prior

approval

Can be used with SKF LubriOil of SKF LubriFluid.

See brochure: 1-5102-EN

2.23.2

UFD20-020

Lubrilean Digital Super 2 For machining centers with double spindles or turning machines with two turrets 1.8 liter capacity Internal or external lubrication Compressed air: Minimum: 6 bars, Optimal: 8 bars, Maximum: 10 bars 24 VDC actuation Level monitoring for 4 points, pressure monitoring, flow sensor

Requires FCA (EMEA, LATAM, APAC) FCA (NAFTA) controls engineering prior

approval

Can be used with SKF LubriOil of SKF LubriFluid.

See brochure: 1-5102-EN

2.24 Aerosol Monitor for MQL Systems


2.24.1

AM1000 Aerosol monitor

Accessories

Spray blocks, nozzles and coaxial tubes; see brochure 1-5102-EN





2.25 Oil/Air for Part Lubrication


2.25.1

VSR-GD-XY VSR System for part lubrication with external controls FCA (NAFTA) ONLY

2.25.2

LGTPN-X-NY-XX-XXX

LGTCN-X-NY-XX-XXX

LGTFN-X-NY-XX-XXX

LGTPN spray nozzle assemblies for oil/air FCA (NAFTA) ONLY

2.25.3

VTEC-522915 VTEC-XXX-XXX-

XXX+XXX VectoLub full modular external MQL system FCA (EMEA, LATAM,APAC)

2.25.4

AC-3790-C2 AC-XXXX-C2 VectoLub spray blocks, nozzles and coaxial tubes FCA (EMEA, LATAM, APAC)

2.25.5

MOD-032 MOD-032-NC VectoLub 6 liter plastic reservoir assembly FCA (EMEA, LATAM, APAC)

Accessories

For SKF VectoLub – Spray blocks, nozzles and coaxial tubes; see brochure 1-4402-EN





3.0 Technical Information and Drawings

Voltage key for electric motors: For FCA (NAFTA) plants – 480 Volts, 3PH, 60 Hz: SKF voltage key: +1FV For FCA (EMEA, LATAM, APAC) plants – 400 Volts, 3PH, 50 Hz: SKF voltage key: +140 For direct current (DC) pumps (KFG & KFA) - 24 VDC: SKF voltage key: +924 FOR FCA (EMEA, LATAM, APAC) Projects in China – 220/380 Volts, 50 Hz +/- 10% CCC motor: SKF voltage key +1FW FOR FCA (EMEA, LATAM, APAC) Projects in Brazil 460 Volts, 60 Hz +/- 10% CCC motor: SKF voltage key: +MGD Quick Disconnects FCA (EMEA, LATAM, APAC) units include a manual fill with strainer only. FCA (NAFTA0 units include a blank plate where a quick disconnect must be installed. A list of quick disconnect couplings can be found in section 3.3. Any drawing, graphic or photo showing a quick disconnect is for representation purposes only. Quick disconnects must be ordered separately. 3.1 MFE Pumps for Piston Distributors Systems for Oil MFE Brochure and Technical Information 1-1202-EN Technical Data for Gear Pump Units: Output: 0.5 l/min Maximum Back Pressure: 28 bar Operating Viscosity: 20 to 1500 mm²/s Medium: Mineral or synthetic oil compliant with plastics, NBR Elastomers, copper and copper alloys Operating Temperature: 10 to 40°C

All gear pump units for piston distributor parallel systems are without filter and quick disconnects.

Depending on applications and plant filter are/or quick disconnects can be assembled. Quick disconnects must be ordered separately! See section 3.3

Summary of MFE pumps for piston distributor systems for FCA (NAFTA)

MFE5-KW3-C100+XXX MFE5-BW3-C100+XXX MFE5-BW30-C100+XXX MFE5-KW6-C100+XXX MFE5-BW7-C100+XXX MFE5-BW50-C100+XXX MFE5-BW16-C100+XXX

Summary of MFE pumps for piston distributor system for FCA (EMEA, LATAM, APAC)

MFE5-KW3-F100+XXX MFE5-BW3-F100+XXX MFE5-BW30-F100+XXX MFE5-KW6-F100+XXX MFE5-BW7-F100+XXX MFE5-BW50-F100+XXX MFE5-BW16-F100+XXX





3.1.1 Standard Dimensions of Reservoirs: 3, 6 and 15 liter (all dimensions are in mm)

Reservoir Capacity (liter)

Height (mm) H

H1

H2

Width (mm) B

B1

Depth (mm) T

T1

Center Distance (mm) D1

D2

D

3 plastic - 154 350 245 320 135 - 220 17.5 7 6 plastic - 183 380 290 390 178 - 220 20 8.5 3 metal 152 170 365 238 315 134 220 220 110 7 6 metal 216 236 430 320 360 142 210 300 140 9 15 metal 250 304 500 436 475 180 260 400 124 9

Units for FCA (EMEA, LATAM, APAC) Units for FCA (NAFTA)

MIN

3

4

2

1

D1

D2

D

R(P

2) P

MIN

R(P

2) P

D2

D

D1

3

4

2

1

H1

H

H2

B

B1

T1

T

B

B1

T

T1

FCA (EMEA, LATAM, APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed. Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3.




E

F

G

H

D

A

B


3.1.2 Standard Dimensions of Reservoirs: 30 and 50 liter (all dimensions are in mm)

Reservoir capacity (liters)

Reservoir Center – Center

footprint

A

B

C

Width

D

Tank Height

E

Height Overall

F

Depth

G

H 30 metal 430 x 240 500 ~514 510 ~381 ~523 320 ~394 50 metal 490 x 270 570 586 580 475 ~617 374 ~448

FCA (EMEA, LATAM, APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed. Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3.





3.1.3 MFE5-KW3-C100

1

1

2

2

3

3

4

4

A A

B B

C C

D D

PART#

DRAWING#

DATE

CUST

CHK'D BY

SCALE

OFSHEET

DRAWN BY

SIZE

First Angle

Projection

Gear Pump Unit

DESCRIPTION

REVISION HISTORY

NUMDATENAME

NOTE:

APP'D

Dimensions in mm(unless specified)

T1000109

07/12/201211

C

360

287

239

230

17.5

7

barAC/DC

40VAA 1.0

48V DCS2-Minimum / NC-contact

WA

241.024V AC

S1-Pre-warning / NO-contact

5)

4)

2)1)

1)

1)

5)

3400

0.61/0.35

Voltage range:

0.145-1min

kWAV265/460

/V220-240/380-420 254-280/440-480

Hz6050/

0.122800

0.61/0.35230/400

Circuit:

Rated power:Rated speed:

Rated current:Rated voltage:

Rated frequency:

FInsulation class:Type of operation acc. to VDE0530: S1 / 100%

3

2

4

1BN1

Standard filter NG40 acc. to DIN24550 for reversible oil flow with visual red pin and 1 electr. switching contact at 75% and at 100% of the cracking pressure.

+24V DC

Circuit diagram

mcm²l/min

25

40440

V24

D

connector

15VA / 15W4-pin, M12x1

p=5

NC-contact (100%)NO-contact (75%)

BKBU

WH43

2 100% warning

24P P

Flows to:

Filter rating abs.:Strainer area:

Contakt picture: Filter free

Switching pressure (-10%):Max. switching output:acc.to IEC 60947-5-2:Electrical connectorMax. switching voltage:

Type of indication:

Pin 3: not used75% pre-warning

176-200-009995-901-056169-400-185-V57

Pressure switch:

Filterelement:Repair set:

Spare parts

Differential pressure switch

1 1

Pressure filter

UL/CSA

3Filter rating:

Breather filter

24V AC/DC

NOT USED

PRE-WARNING

> MINIMUM

M12x1

BN1

BU

BK

3

4

M12x1

2 WH

Circuit diagram

Float switch for min lubricant level with pre-warning

Contact scheme: Filled reservoir (maximum)

Elektrical connector:Max. breaking capacity:Max. switching current:Max. operating voltage:

Outputs / type of contact:

In reaching the minimum level contact 1-2 is opening.25mm before the minimum level contact 1-4 closes.Function:

Level switch

l3Reservoir capacity:

Technical data

l/minbarmm²/s

0.6

°C

280.5Output:

Max. back pressure:Operating viscosity:Mineral- or synthetic oil compliant with:

Operating temperature:

Motor

Degree of protection acc. to DIN EN 60529: IP54

plastics, NBR-elastomeres, copper and copper alloys+10 ... +40

20 ... 1000

Standards:

HD 60364-4-41/ DIN VDE 0100-410 / IEC60364-4-41

EN60204-1 / IEC60204-1

"Protective Extra Low Voltage" (PELV)

Applicable protection measures for operation:

8) for cable Ø6...Ø12mm

5)

2)

3)

4)

6)

at a back pressure p=5bar. Output (flow rate), is based on an operating viscosity of 140mm²/s (cSt),

Please specify voltages and frequencies when ordering

For exact power consumption see name plate.

The max back pressure is equivalent to the actual value of the built-in

P=pressure port G1/2

R=return port G1/2 closed7)

ordered separately.Quick coupling complete for reservoirs must be

Order-No.Order-No.

9)

995-001-519995-004-521G3/4

995-001-500995-002-096G1/4

995-001-517995-004-088G1/8

disconnectFemale quick

-A- for reservoirsQuick coupling completeThread

Hydraulic layout

R

P

T1P

S

u

u m

pressure regulating valve.

Revision 1.3

CHRYSLER/FIAT

Lubrication Systems

11.10.2010

FCA (EMEA, LATAM, APAC) units include manual fill with strainer only. FCA (NAFTA0 units include a blank plate where a quick disconnect must be installed. Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3





3.1.4 MFE5-KWU3-C100


m m

D

m

D

m




DD

CC

BB

AA

4

4

3

3

2

2

1

1

(unless specified)Dimensions in mm

APP'D

NOTE:

NAMEDATENUM

REVISION HISTORY

DESCRIPTION

Piston Pump Unit

Projection

First Angle

CSIZE

DRAWN BY

SHEET OF1 1

SCALE

CHK'D BY

CUST

11/14/2011DATE

N1004537DRAWING#

PART#

388

345

250

140

300

9 THRU2X

G1/4

Outlet Port: ISO-1179 G1/2"


3.1.5 P-886-BWW-C100





3.2 Angle Bracket for Filter Assembly

881-280-086 881-260-041

Reservoir Capacity (liters) Angle Bracket Order Number 3 plastic - 6 plastic - 3 metal 881-260-041 6 metal 881-280-086 15 metal 881-280-086 30 metal 881-280-086 50 metal 881-280-086





3.3 Quick Disconnect Coupling

1

1

2

2

3

3

4

4

A A

B B

First Angle

Projection

DESCRIPTION

PART#

DWG#

SHEET OF DATE

NOTE:

DRAWN BY:

CHK'D BY: REVISION HISTORY

NUM.DATENAME

SIZESCALE

CUST

APP'D

M1000813

1 1 12/09/2013

SMoninger

NTS B

Available Filler Couplings

Parker Series FEM Parker Series 60 Parker Series FF

FillerCoupling

Size

Nipple Coupler Nipple Coupler Nipple CouplerParker-single part

(coupling only)SKF-assembly(sieve,housing,

adapter, coupling)

Parker-single part(coupling only)

SKF-assembly(sieve,housing,

adapter, coupling)



adapter, coupling)



adapter, coupling)



adapter, coupling)



adapter, coupling)

1/8 " n.a. n.a. n.a. n.a. H1-63-BSPP 995-003-529 H1-62-BSPP 995-005-088 n.a. n.a. n.a. n.a.

1/4 " n.a. n.a. n.a. n.a. H2-63-BSPP 995-002-096 H2-62-BSPP 995-005-096 n.a. n.a. n.a. n.a.

3/8 " FEM-382-6FB 995-003-534 FEM-371-6FB n.a. H3-63-BSPP 995-003-530 H3-62-BSPP 995-005-097 FF-372-8FB 995-001-228 FF-371-8FB 995-001-227

1/2 " n.a. n.a. n.a. n.a. H4-63-BSPP 995-003-531 H4-62-BSPP 995-003-533 FF-502-8FB 995-003-517 FF-501-8FB 995-003-518

5/8 " FEM-622-12FB 995-003-527 FEM-621-12FB n.a. n.a. n.a. n.a. n.a. n.a. n.a. n.a. n.a.

3/4 " FEM-752-16FB 995-003-528 FEM-751-16FB n.a. H6-63-BSPP 995-003-532 H6-62-BSPP 995-005-521 FF-752-10FB n.a. FF-751-10FB n.a.





3.4 Glycerine Filled Pressure Gauges

See Brochure 1-0103-EN

http://www.skf.com/binary/21-30929/1-0103-EN.pdf





3.5 MFE Pumps for Piston Distributors for Fluid Grease

Technical Data:

Output: 0.2 l/min Maximum back pressure: 38 bar Fluid grease NLGI class: 00, 000 Operating temperature: 10 to 40°C Degree of protection acc. To DIN EN 60529: IP54

Summary of MFE Pumps for Piston Distributors for Fluid Grease for FCA (NAFTA)

MFE2-KW3F-C100+XXX MFE2-KW6F-C100+XXX

Summary of MFE Pumps for Piston Distributors for Fluid Grease for FCA (EMEA, LATAM, APAC)

MFE2-KW3F-F100+XXX MFE2-KW6F-F100+XXX

FCA (EMEA, LATAM, APAC) units include manual fill with strainer only. FCA (NAFTA) units included a blank plate where a quick disconnect must be installed. Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3.




3.5.1 MFE2-KW*F-C100


L






3.6 MF Pumps for Progressive Systems

Technical Data:

Technical data for MF1-BW7-V100+XXX units:

Output: 0.1 l/min Maximum back pressure: 60 bar Operating viscosity: 20 to 1500 mm²/s Mineral or synthetic oil compliant with: plastics, NBR elastomers, copper and copper alloys Operating temperature: 10 to 40°C Degree of protection acc. To DIN EN 60529: IP54

Summary of MFE pumps for progressive systems for oil for FCA (NAFTA) MF1-BW7-C100+XXX Summary or MFE pumps for progressive systems for oil for FCA (EMEA, LATAM, APAC) MF1-BW7-F100+XXX





3.6.1 MF1-BW*-C100


MIN




3.7 KFG1-5W2*-V71+924 Piston Pump for Progressive Systems for Fluid Grease


FCA (EMEA, LATAM, APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed. Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3




3.8 KFG1-5W1*-V71+924 Piston Pump for Progressive Systems for Grease






3.9 KFB1-M-W+924


FCA (EMEA, LATAM, APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed. Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3 L




3.10 KFA1-M-WA-V71+924 Pumps for Progressive Systems for Grease



L





3.11 Piston Distributor 341 and Manifolds

Single Piston Disributor 341, Metering up to 0.16 ccm See Brochure 1-5001-EN

Manifolds for Single Piston Distributor 341 See Brochure 1-5001-EN

3.12 Piston Distributor 342, 343, 345 Series

Metering up to 0.16 ccm See Brochure 1-5001-EN




3.14 Piston Distributor 352, 353, 355 Series





3.16 Piston Distributor 392, 393 Series


3.17 Oil + Air Mixing Valves MV20X-100-XXXXXXXX

See Brochure 1-5012-3-EN

3.18 Progressive Feeder VPG


3.19 Progressive Feeder VPKG


3.20 Progressive Feeder VPBG


3.21 Modular Feeder PSG2


3.22 Cycle Switch 177-300-094 for VP and PSG Progressive Feeders


3.23 Cycle Switch 177-300-095 for VPK Progressive Feeders








http://www.skf.com/binary/21-32208/1-5012-3-EN.pdf











3.24 Cycle Switch 177-300-097 for VPB Progressive Feeders


3.25 Cycle Switch Connectors for Progressive Feeders


3.26 Overpressure Indicators for Progressive Feeders


3.27 Pressure Switches










3.28 Ultrasonic Level Switch





3.29 Flow Monitor GS300


3.30 Oil + Air Streak Sensor GS4011-S XX


3.31 2/2 Way Directional Valve for Oil and Grease 161-110-031+924


3.32 3/2 Way directional Valve for Oil and Grease 161-120-064+924


3.33 4/2 Way Directional Valve for Oil 161-140-050+924











3.34 Zero Leakage 2/2 Way Valve for Oil VPG VEN-V71A+924

160 bar max.24 V DC1.3 A0.03 kWI P64100%

Technical Data:

Pressure:Voltage:Nom inal current :Nom inal power:Protect ion:Duty cycle:Sym bol:





3.35 Zero Leakage 2/2 Way Valve with Union Block VPG-VEN-V71+924

160 bar m ax.24 V DC1.3 A0.03 kWI P64100%

Technical Data:

Pressure:Voltage:Nom inal current :Nom inal power:Protect ion:Duty cycle:Sym bol:





3.36 Filter

Pressure Filter NG63 acc. To DIN24550


Description Order Number Filter Rating Pressure Filter 169-460-099-V57 3 µm Pressure Filter 169-460-087-V70 10 µm Pressure Filter 169-460-185 25 µm

Spare Parts Order Number Filter Rating Filter Element 169-400-257 3 µm Filter Element 169-400-250 10 µm Filter Element 169-400-185-V57 25 µm

Repair Set Seals 995-901-056 - Pressure Switch 176-200-012 -

Screen Filter


Description Order Number Filter Rating Screen filter 213-900 25 µm







3.37 Check Valves for Progressive Feeders


3.38 Lubrilean Vario UFV10-014-2


3.39 Lubrilean Vario Plus UFV10-019-2


3.40 Lubrilean Vario Super


3.41 Lubrilean Digital Super



3.42 Lubrilean Aerosol Monitor AM1000








http://www.skf.com/binary/21-280255/16807EN.pdf





3.43 VSR System for Part Lubrication with External Controls

ORSCO





3.44 LGPTN Spray Nozzle Assemblies for Oil/Air

ORSCO




1 MI CROPOMPES PNEUMATI QUE (x3) PNEUMATI C MI CROPUMP (x3) PNEUMATI SCHE MI KROPUMPE (x3)

2 REGULATEURS D'AIR VECTEUR (x3) CARRI ER AI R FLOW REGULATOR (x3) TRAGLUFTREGLER (x4)

3 MANOMETRE D'AI R GENERAL 0 A 10 BAR GENERAL AI R MANOMETER 0 TO 10 BAR GESAMTLUFT-MANOMETER 0 BIS 10 BAR

4 SORTI E AI R COAXI ALE (x3) , RACCORDS I NSTANTANES Air pour tube ØExt .8 et Liquide pour tube ØExt . 3,2 AI R COAXI AL OUTLET (x3) , QUI CK-RELEASE COUPLING for Air tube OD 8 , for Lubricant tube OD 3,2 LUFT-KOAXI ALAUSGANG (x3) , STECKVERBINDER LUFT für Rohr außen 8 , Schm ierstoff für Rohr außen 3,2

5 BOUCHON DE PURGE LI QUIDE LUBRI CANT DRAI N PLUG SCHMI ERSTOFF-ABLASSCHRAUBE

6 ALI MENTATI ON AI R GENERAL , RACCORD INSTANTANE POUR TUBE ØEXT.8 AI R I NLET , CONNECTI ON WITH QUICK CONNECTOR Ø8 DRUCKLUFTEI NLASS , STECKVERBINDER Ø8

7 ALI MENTATI ON LI QUI DE , RACCORD INSTANTANE POUR TUBE ØEXT.8 LUBRI CANT I NLET , CONNECTION WITH QUICK CONNECTOR Ø8 SCHMI ERSTOFFEI NLASS , STECKVERBINDER Ø8

8 ELECTROVANNE D'AI R GENERAL ( Y1 ) GENERAL AI R SOLENOI D VALVE ( Y1 ) GESAMTLUFTVENTI L ( Y1 )

9 ELECTROVANNE D'AI R DE COMMANDE DE MI CROPOMPES ( Y2 ) AI R SOLENOI D VALVE (PUMP CONTROL) ( Y2 ) PNEUMATI SCHES MAGNETVENTIL (BETÄTIGUNG DER MI KROPUMPE) ( Y2 )

CARACTERI STI QUES TECHNI QUES / TECHNICAL DATA / TECHNI SCHE DATENAlim entat ion en air / air consum pt ion / Luftverbrauch : 100Nl par sort ie / per out let / pro AuslassPression air général / inlet pressure / Luftdruck : 5 à / to / bis 8 barPression d'alim entat ion liquide / lubricant inlet pressure / Schmierstoffdruck : 0,1 à / to / bis 0,5 barDébit liquide / flow rate / Förderm enge : 7 à / to / bis 30 mm ³ par coup par sort ie / st roke and out let / Hub und j e AuslassTem pérature de service / operat ing tem perature / Bet riebstemperatur : + 10°C à / to / bis + 50°CLubrifiant / lubricant / Schm ierstoff : v iscosité effect ive de 3 à 400m m² / s à la tem pérature d'ut ilisat ion / eff. v iscosity 3 to 400m m ² / s at operat ing temperature / eff. Viskosität 3 bis 400m m ² / s bei Betr iebstemperatur

ELECTROVANNE D'AI R GENERAL / GENERAL AI R SOLENOID VALVE / GESAMTLUFVENTILAlim entat ion élect r ique / power supply / Stromversorgung : 24Vcc : 1,8WProtect ion / protect ion / Schutzart : IP65Durée de vie / service life / Lebensdauer : 1,5x10 manoeuvres / switching operat ions / Schaltspiele

ELECTROVANNE D'AI R DE COMMANDE DE MI CROPOMPE / AI R SOLENOI D VALVE (PUMP CONTROL) / PNEUMATI SCHES MAGNETVENTIL (BETÄTIGUNG DER MI KROPUMPE)Alim entat ion élect r ique / power supply / Stromversorgung : 24Vcc : 1WProtect ion / protect ion / Schutzart : IP65Durée de vie / service life / Lebensdauer : 1,5x107 manoeuvres / switching operat ions / Schaltspiele

Référenceplan

RéférenceEnsemble

Echelle

En rem placem ent de

Désignat ion

Largeur HauteurLongueurDim ensions m ( indicat if)

Poids(Est imé)

Référence inform at ique 1 / 1Folio

Eq.CO2 Kg

VTEC-522915G: \ INVENTOR\ MECA\ VTEC\ VTEC-522915.idw

20

/04

/20

07

GJN

20

/04

/20

07

S.S

A3

N/ A

MMS-EI NHEITMQL UNI T

UNI TE DE MI CROLUBRI FICATION

VTEC/

1/ 2

~170

4 132

155

5

155

473,

5

1

2

3

4

5

6

7

8 9

6


3.45 VTEC 522915, VectoLub Full Modular External MQL System





3.46 AC-3790-C2 VectoLub Spray Block with Nozzle Assembly


3.47 MOD-032 VectoLub 6 Liter Plastic Reservoir Assembly








Order Form

FCA (NAFTA) Only Components Order Form Page 1 of 13

Section Order Code Description Notes Qty Delivery Plant

2.1.1

MFE5-KW3-C100+1FV Gear pump for oil, 3L plastic reservoir

Quick fill sold separately See section 3.3

MFE5-KW6-C100+1FV Gear pump for oil, 6L plastic reservoir

MFE5-KWU3-C100+1FV Gear pump for oil, 3L plastic reservoir


2.1.2

MFE5-BW3-C100+1FV Gear pump for oil, 3L plastic reservoir





MFE5-BWU3-C100+1FV Gear pump for oil, 6L plastic reservoir





2.1.5

P-886-BWW7-C100 Pneumatic piston pump for oil, 7L metal reservoir

P-886-BWW16-C100 Pneumatic piston pump for oil, 16L metal reservoir

P-886-BWU7-C100 Pneumatic piston pump for oil, 7L metal reservoir

P-886-BWU16-C100 Pneumatic piston pump for oil, 16L metal reservoir

2.2.1

MFE2-KW3F-C100+1FV Gear pump for fluid grease, 3L plastic reservoir

MFE2-KW6F-C100+1FV Gear pump for fluid grease, 6L plastic reservoir

MFE2-KWU3F-C100+1FV Gear pump for fluid grease, 3L plastic reservoir

MFE2-KWU6F-C100+1FV Gear pump for fluid grease, 6L plastic reservoir

2.2.3 KFB1-M-W+924 Gear Pump for fluid grease, 1.4L plastic reservoir







2.3.1 MFE5-KW3-C100+1FV Gear pump for oil, 3L plastic reservoir



2.4.1 MF1-BW7-C100+1FV For circulating oil systems 6L metal reservoir

MF1-BWU7-C100+1FV For circulating oil systems 6L metal reservoir

2.5.3

KFA1-M-WA-V71+924 Compact unit for grease Q=2.0 cm³/min

KFA1-M-WB-V71+924 Compact unit for grease Q=1.5 cm³/min

KFA1-M-WC-V71+924 Compact unit for grease Q=1.0 cm³/min

2.19.1

995-003-534 Quick disconnect 3/8"

Complete quick disconnect with coupler, strainer and housing



2.19.2





995-003-532 Quick disconnect 3/4""












2.19.3





2.25.1 VSR-GD-XY VSR system for part lubrication

2.25.2

LGTPN-X-NY-XX-XXX Spray nozzle assemblies for Oil + Air

LGTCN-X-NY-XX-XXX Spray nozzle assemblies for Oil + Air

LGTFN-X-NY-XX-XXX Spray nozzle assemblies for Oil + Air





FCA (EMAE, LATAM, APAC) Only Components Order Form Page 4 of 13


2.1.3

MFE5-KW3-F100+140 Gear pump for oil, 3L plastic reservoir

MFE5-KW6-F100+140 Gear pump for oil, 6L plastic reservoir

MFE5-KWU3-F100+140 Gear pump for oil, 3L plastic reservoir


2.1.4

MFE5-BW3-F100+140 Gear pump for oil, 3L metal reservoir





MFE5-BWU3-F100+140 Gear pump for oil, 3L metal reservoir









FCA (EMAE, LATAM, APAC) Only Components Order Form Page 5 of 13


2.2.2

MFE2-KW3F-F100+140 Gear pump for fluid grease, 3L plastic reservoir

MFE2-KW6F-F100+140 Gear pump for fluid grease, 6L plastic reservoir

MFE2-KWU3F-F100+140 Gear pump for fluid grease, 3L plastic reservoir

MFE2-KWU6F-F100+140 Gear pump for fluid grease, 6L plastic reservoir

2.3.2 MFE5-KW3-F100+140 Gear pump for oil, 3L plastic reservoir


2.4.2

MF1-BW7-F100+140 For circulating oil systems, 6L metal reservoir

MF1-BWU7-F100+140 For circulating oil systems, 6L metal reservoir

2.25.3

VTEC-522915 VectoLub full modular external MQL system

VTEC-XXX-XXX-XXX+XXX VectoLub full modular external MQL system Application specific

2.25.4

AC-3790-C2 VectoLub spray block with nozzle assembly

AC-XXXX-C2 VectoLub spray block with nozzle assembly Application specific

2.25.5

MOD-032 VectoLub 6L, plastic reservoir assembly

MOD-032-NC VectoLub 6L, plastic reservoir assembly With level switch





FCA (NAFTA) FCA (EMAE, LATAM, APAC) Common Components Order Form Page 6 of 13


2.5.1

KFG1-5W2A-V71+924 Pump for grease, Q=2.5 cm³/min


KFG1-5W2B-V71+924 Pump for grease, Q=1.8 cm³/min

KFG1-5W2C-V71+924 Pump for grease, Q=1.3 cm³/min

KFG1-5W2D-V71+924 Pump for grease, Q=0.8 cm³/min

2.5.2

KFG1-5W1GA-V71+924 Pump for fluid grease, Q=2.5 cm³/min


KFG1-5W1GB-V71+924 Pump for fluid grease, Q=1.8 cm³/min

KFG1-5W1GC-V71+924 Pump for fluid grease, Q=1.3 cm³/min

KFG1-5W1GD-V71+924 Pump for fluid grease, Q=0.8 cm³/min

2.6.1

341-1XX-10000-00 Single piston distributor for oil, 0.01 cm³

See page 52 for order code key






2.6.1







2.6.1

391-000-40000-00 Single piston distributor for oil, 0.10 cm³










2.6.2

342-4XX-XX000-XXX Standard piston distributor for oil, 2 port See page 52 for order code key

343-4XX-XX000-XXX Standard piston distributor for oil, 3 port


2.6.3

352-0XX-XX000-XXX Standard piston distributor for oil, 2 port See page 52 for order code key



2.6.4 392-000-XX000-XXX Standard piston distributor for oil, 2 port


393-000-XX000-XXX Standard piston distributor for oil, 2 port







2.7.1

341-7XX-X0000-00 Single piston distributor for fluid grease

See page 52 for order key code

351-1XX-X0000-00 Single piston distributor for fluid grease

391-100-X0000-00 Single piston distributor for fluid grease

2.7.2

342-5XX-XX000-XX Single piston distributor for fluid grease, 2 port

343-5XX-XXX00-XX Single piston distributor for fluid grease, 3 port

345-5XX-XXXXX-XX Single piston distributor for fluid grease, 5 port

2.7.3

352-1XX-XX000-XX Standard piston distributor for fluid grease, 2 port

353-1XX-XXX00-XX Standard piston distributor for fluid grease, 3 port

355-1XX-XXXXX-XX Standard piston distributor for fluid grease, 5 port

2.7.4 392-100-XX000-XX Standard piston distributor for fluid grease, 2 port

393-100-XXX00-XX Standard piston distributor for fluid grease, 3 port

2.8.1

VL-02AAG1 Manifold for single piston distributor 341, 2 port, G1/8

Manifolds for 341 series






VL-02-AAM1 Manifold for single piston distributor 341, 2 port, M10X1



VL-02-AAM2 Manifold for single piston distributor 341, 2 port, M14X1.5









2.8.2

VL-02BAG1 Manifold for single piston distributor 351, 2 port, G1/8

Manifolds for 351 series






VL-02-BAM1 Manifold for single piston distributor 351, 2 port, M10X1



VL-02-BAM2 Manifold for single piston distributor 351, 2 port, M14X1.5



2.8.2

VL-02CAG1 Manifold for single piston distributor 391, 2 port, G1/8

Manifolds for 391






VL-02-CAM1 Manifold for single piston distributor 391, 2 port, M10X1



VL-02-CAM2 Manifold for single piston distributor 391, 2 port, M14X1.5

VL-03-CAM2 Manifold for single piston distributor 391, 3 port, M14X1.5








2.9.1

MV201-100-X000000 Oil + Air Mixing Valve, 1 Port









2.10.1

VPG/03XX/00A1-XXX Feeder, 3 sections (max. 6 outlets)








2.10.2

VPKG/03XX/00A1-XXX Feeder, 3 sections (max. 6 outlets)














2.10.3

VPBG/03XX/00A1-XXX Feeder, 3 sections (max. 6 outlets)

See page 53 order code key








2.10.4

PSG2/03XX/00A1 Feeder, 3 sections (max. 6 outlets)








2.11.1

VPG-RV Check valve for VPKG, VPBG; 10 bar, Ø4mm

Note: VPG sectional feeders have an internal check valve at each outlet. VPKG and VPBG sectional feeders do not have

internal check valves

VPG-RV6 Check valve for VPKG, VPBG; 10 bar, Ø6mm

VPG-RV8 Check valve for VPKG, VPBG; 10 bar, Ø10mm







2.11.2 VPKG-RV Check valve, VPKG, VPGB; 3 bar, Ø6 mm With sleeve fitting and compression nut

2.11.3 VPKG-RV-VS Check valve for VPKG, VPGB; 3 bar, Ø6 mm Quick connection

2.12.1 177-300-094 Cycle switch for VPG / PSG2

2.12.2 177-300-095 Cycle switch for VPKG

2.12.3 177-300-097 Cycle switch for VPBG

2.12.4 179-990-600 Straight socket connector w/ 5 meter cable

179-660-601 Elbow socket connector w/ 5 meter cable

2.13.1 VPG-UE16-2 Over pressure indicator, 16 bar

VPG-UE32-2 Over pressure indicator, 32 bar








2.14.1 DSC3-A100K-3A2B Electronic pressure switch, M12X1, 4 pins

2.15.1 995-800-135 Ultrasonic level switch, M12x1, 4-pins

2.16.1 GS300 Flow monitor for piston distributor systems

2.17.1 GS4011-S20 Oil + Air streak sensor, 120-600 mm³/hr

GS4011-S50 Oil + Air streak sensor, 60-120 mm³/hr

2.18.1 169-460-099-V57 Pressure filter w/ clogging indicator 3 µm Oil

169-460-087-V70 Pressure filter w/ clogging indicator 10 µm Oil

169-460-185 Pressure filter w clogging indicator 25 µm Oil







2.18.2 213-900 Screen filter for grease, 25 µm

2.20.1

169-104-015 Pressure gauge, 0-40 bar / 0-580 psi / 0-4 MPa

169-110-015 Pressure gauge 0-100 bar / 0-1450 psi / 0-10 MPa

169-125-015 Pressure gauge 0-250 bar / 0-3625 psi / 0-25 MPa

2.21.1 161-110-031+924 2/2 way valve, oil and grease

2.21.2 VPG-VEN-V71A+924 2/2 way zero leakage valve, oil

2.21.3 VPG-VEN-V71+924 2/2 way zero leakage valve, oil With union block for remote mounting

2.21.4 161-120-064+924 3/2 way valve, oil and grease

2.21.5 161-140-050+924 4/2 way valve, oil

2.22.1 UFV10-014-2 Lubrilean Vario

2.22.2 UFV10-019-2 Lubrilean VarioPlus

2.22.3 UFV30-003 Lubrilean VarioSuper

2.23.1 UFD10-020 Lubrilean DigitalSuper 1

2.23.2 UFD20-020 Lubrilean DigitalSuper 2

2.24.1 AM1000 Aerosol Monitor

Date post:	31-Jan-2017
Category:	Documents
Upload:	vuongdat
View:	249 times
Download:	17 times

Component List for SKF Lubrication Systems Products

Documents