Home > Documents > Composite Piping System · 2018-09-27 · uPVC Pressure Piping Systems, uPVC Column Pipes, HDPE...

Composite Piping System · 2018-09-27 · uPVC Pressure Piping Systems, uPVC Column Pipes, HDPE...

Date post: 08-Apr-2020
Category:
Author: others
View: 6 times
Download: 0 times
Share this document with a friend
Embed Size (px)
of 9 /9
Composite Piping System www.vectus.in
Transcript
  • Composite Piping System

    www.vec tu s . i n

  • Vectus Industries Limited is one of the largest manufacturers of PVC pipes and has a well -

    diversified portfolio of piping systems such as PPR Piping Systems, CPVC Piping Systems,

    uPVC Pressure Piping Systems, uPVC Column Pipes, HDPE Pipes, Casing Pipes and SWR

    Drainage Systems.

    With more than 3500 dealers, 10,000+ retail counters, 14 manufacturing plants and 9 depots

    across the country; Vectus has become India's leading and one of the fastest growing Water

    Storage and Piping Systems Company.

    Vectus now introduces Composite Piping Systems (PE - AL - PE), the most advanced Piping

    Systems used worldwide.

    Corrosion resistance, scale free, being inert to acids & chemicals and a smooth flow are few of

    its unique features. Durability, flexibility and strength make Vectus Composite Pipes ideal for

    hot and cold water plumbing, potable water system, central heating, under floor heating,

    chemical and gas transportation, jet & submersible pump piping and even as electric wire

    conduit.

    The life span of these pipes is more than 50 years!

    Vectus Pipes Plant at Gwalior, Madhya Pradesh

    MULTIPLE PE-AL-PE LAYERS

    VECTUS

    A Vectus Composite Pipe is composed of five layers.

    Vectus Composite Pipes consist of an Aluminium core with an inner and outer layer of

    Polyethylene (PE). All the layers are permanently bonded together by intermediate

    adhesive layers. The level of thickness of the aluminium layer in Vectus Composite Pipes

    has been selected to meet compressive and flexural strength requirements.

    This helps to combine the advantages of metal and plastic pipes and eliminate the

    disadvantages of both materials at the same time. The aluminium core is absolutely

    diffusion tight and reliably prevents oxygen or gases from permeating into the pipe. It

    compensates and reduces snap-back forces and heat expansion with changes in

    temperature.

    UV stabilised Outer PE Layer

    Overlapped Welded Aluminium Layer

  • Advantages of Vectus Composite Piping System

    Advantages of

    PE layers:

    PE layers of composite pipe

    provide all the benefits of a

    plastic pipe which include:

    Ÿ Corrosion & Scale resistance.

    Ÿ Chemically inert.

    Ÿ Smooth surface for better flow

    rate.

    Ÿ Non-toxic & rust free.

    Ÿ UV resistant.

    Ÿ Crack free

    Advantages of

    Adhesive layers:

    Ÿ Perfectly bonds the metal and

    plastic layers.

    Ÿ Absorbs eventual shifting

    movements between the

    plastic and the metal layers;

    likely to occur in opposite

    directions. Also minimises the

    contraction and expansion of

    the pipe.

    Ÿ Gives the Composite pipe

    advantages of a single

    component pipe.

    Advantages of

    Aluminium core:

    Ÿ Acts as a permeation barrier

    against entry of contaminants.

    Ÿ Limits oxygen permeability to

    an absolute zero.

    Ÿ Provides mechanical resistance

    to deformation.

    Ÿ Restricts expansion and

    contraction which could occur

    due to change in temperature.

    Ÿ Vectus Composite Pipes are manufactured in the state of the art manufacturing facilities incorporating modern

    German technology and know how conforming to global standards.

    Ÿ The fittings are mainly compression fittings, made of polymer and brass, which are user friendly as the joints are

    tightened to the pipe by inserting them in. They don't require any glue or solvents, brazing, welding or heat fusions

    for jointing which result in loss of properties during prolonged usage thereby inducing leakages.

    Ÿ The Vectus Piping System can be installed in walls and ceilings or mounted surface.

    Ÿ The pipes have a high level of ductility and flexibility, which means they can be easily bent by hand to form curves

    and permanently hold whatever shape they are formed into, without getting strained. One doesn't need any

    additional clips or brackets to retain the shape of bends or curves. However, these pipes only require bending

    springs to form tight bends down to the radius equivalent to 5 times the diameter of the pipe.

    Ÿ Also, since these pipes are bendable, a very less number of fittings are required for jointing which makes the piping

    system leakage proof.

    Ÿ Due to the smooth internal bore, the Vectus Composite Pipes have a higher flow rate as compared to other plastic

    pipes of equivalent diameter.

    Why Vectus Composite Pipes?

    1014

    1216

    1620

    2025

    2532

    3240

    4050

    Pipe Size

    (mm)

    10

    12

    16

    20

    25

    32

    40

    InnerDiameter

    (mm)

    14

    16

    20

    25

    32

    40

    50

    MaximumOuter

    Diameter(mm)

    1.70

    1.75

    2.00

    2.45

    2.80

    3.40

    4.00

    Maximum Wall

    Thickness(mm)

    200

    200

    200

    100

    100

    50

    50

    Maximum Coil/Pipe Length

    (metres)

    0.20

    0.20

    0.25

    0.25

    0.30

    0.30

    0.30

    Maximum Aluminium Thickness

    (mm)

    0.40

    0.40

    0.40

    0.40

    0.40

    0.40

    0.40

    Minimum Outer Layer Thickness

    (mm)

    0.10

    0.12

    0.16

    0.23

    0.35

    0.52

    0.68

    Maximum Weight

    (Kg/Metre)

    5/8

    ½

    ¾

    1

    2

    Equivalent NB Size (inch)

    Vectus Black Composite Pipes

    As per IS 15450:2004

    Vectus Black Composite Pipes are manufactured as per IS15450:2004. The piping system is well supported

    by Compression Composite Fittings which don't require any glue or solvent during installation.

    The working temperature of a Black Composite

    Pipe ranges from -40°C to 95°C, which increases

    its level of endurance over any other plastic

    piping system. Although, it can withstand

    water at a very low temperature due to its frost

    resistance characteristic, insulation is still

    recommended.

    Also, due to low thermal conductivity it can

    be used for hot water operations needing a

    temperature up to 95° C. The middle layer

    of aluminium which restricts particles from

    entering into the pipe and the outer UV

    protective PE layer - made of black carbon,

    makes it suitable for outdoor operations.

    Black Composite Pipe

    Our Product Range

  • Hot and Cold Water Distribution:The inner layer of Vectus Composite Pipe is made out of High

    Density Polyethylene which minimises the accumulation and

    corrosion leading to more flow of liquid compared to metal

    piping system. And the aluminium layer can handle both hot &

    cold temperature water. Hence, the combination of plastic and

    metal makes Vectus Composite Piping System, a highly reliable

    system to be used in all common hot and cold water

    installations.

    Electric Wire & Optical Fibre Conduit:The outer and inner PE layer is also useful for electric wires as

    well as optical fibres conduit. Also, aluminium being the core of

    the pipe makes it suitable to cover telephone lines and data

    transmission cables.

    Solar Water Heating System, Air Conditioning

    and Refrigeration System:A Composite pipe has a low thermal conductivity and frost

    resistance, which makes it ideal for air conditioning,

    refrigeration system, solar heating water system, central

    heating system. Vectus Composite Pipes can be installed

    having a length of 50 to 200 meters without any fittings which

    makes the entire system leak proof.

    Medical, Food and Chemical Industry:The inner and outer layers of Vectus Composite Pipes are made

    of special PE, which is highly chemical, corrosion and

    contamination resistant. The aluminium core minimizes the

    leakage to absolute zero. The static-free PE layers can also

    withstand all kinds of acid and alkali solution (in density)

    below 60°C, which enables the pipe to be used in the chemical

    industry with no extra protection.

    Gas and Air Distribution:The aluminium layer allows Vectus Composite Pipes to

    withstand high working pressure and prevent oxygen and gases

    from permeating into the pipe. They are easily bent, which

    makes the use of numerous fittings unnecessary. Vectus

    Composite Pipes are a safe and reliable choice for compressed

    air, gas and oxygen supply.

    Applications

    Quality Standards

    At Vectus, we believe that quality should be given utmost

    importance in order to create value and achieve customer

    satisfaction. Our state of the art manufacturing facilities -

    integrated with highly advanced technology - are

    fundamental to the world class products that we've been

    creating all these years. Right from the procurement of

    raw material to the production of actual products, there is

    a strict adherence to quality standards.

  • Vectus Yellow Composite pipes are manufactured as per ASTM F - 1282. They are specifically designed and

    manufactured for oxygen and gas supply and pneumatic system. The working temperature of Yellow composite

    pipes ranges from - 40 °C to 50 °C.

    YELLOW is the standard colour used for pipes meant for gas transmission and compressed air; gases

    namely LPG, CNG, PNG & oxygen supplies. A different colour code helps one easily identify the pipes

    carrying components that could be hazardous to one's life.

    Yellow Composite Pipe

    1014

    1216

    10

    12

    14

    16

    1.70

    1.75

    200

    200

    0.20

    0.20

    0.40

    0.40

    0.10

    0.12

    5/8

    ½

    Pipe Size

    (mm)

    InnerDiameter

    (mm)

    MaximumOuter

    Diameter(mm)

    Maximum Wall

    Thickness(mm)

    Maximum Coil/Pipe Length

    (metres)

    Maximum Aluminium Thickness

    (mm)

    Minimum Outer Layer Thickness

    (mm)

    Maximum Weight

    (Kg/Metre)

    Equivalent NB Size (inch)

    Vectus Yellow Composite Pipes

    Gas and Air Distribution: The aluminium layer allows Vectus Composite

    Pipes to withstand high working pressure and prevent oxygen and gases

    from permeating into the pipe. It is easy to bend, which minimizes the

    number of fittings required. Yellow composite pipes are safe and reliable

    choice for compressed air, gas and oxygen supply.

    For pneumatic systems in specific, we recommend to use brass fittings

    for longer life and air tight joints. Vectus manufactured composite pipes

    and fittings are designed to withstand 1.5 times the rated pressure,

    which makes them reliable for any kind of pneumatic system.

    Applications

    In Healthcare & Hospitals In Industry

    In Residential Complexes

  • Female Threaded Union(Female Thread Adaptor)

    Male Threaded Straight Union (Male Adapter Plastic Threaded)

    Equal Straight Union(Straight Joint)

    Unequal Straight Union(Reducer)Female Tee

    Equal Tee

    POLYMER FITTINGS POLYMER FITTINGS

    The three ends are connected to pipes of

    same sizes, eg. 1620 x 1620 x 1620.

    Means three ends are connected to pipes

    1620 each.1216 x 1216

    1620 x 1620

    2025 x 2025

    2532 x 2532

    3240 x 3240

    1620 x 1216

    2025 x 1216

    2025 x 1620

    2532 x 1216

    2532 x 1620

    2532 x 2025

    3240 x 1216

    3240 x 1620

    3240 x 2025

    3240 x 2532

    One end is connected to pipe & the other to

    male thread, eg. 1620 x ½. It means that

    one end is connected to pipe 1620 & the

    other to ½” male thread.

    One end is connected to pipe, the other to

    female thread, eg. 1620 x ½. It means that

    one end is connected to pipe & the other to

    ½” female thread.

    Middle end is connected to a male thread &

    the other two to pipes. For eg. 1620 x ½ F

    x 1620.

    Both the ends are connected to pipes of

    different sizes, eg.1620 x 1216. It means

    that one end is connected to pipe 1620 &

    the other is connected to pipe 1216.

    Unequal Tee(Reducing Tee)

    The three ends are connected to pipes, with

    one or two ends different in size from the

    other end(s). For eg. 2025 x 1620 x

    1620.

    Both the ends are connected to the pipes of

    same size, eg. 1620 x 1620. It means that

    both the ends are connected to pipes 1620.

    Male Straight Union (Male Adapter Brass Threaded)

    One end is connected to pipe & the other to

    female thread, eg. 1620 x ½. It means that

    one end is connected to pipe, the other to

    ½” female thread.

    1216 x ½"

    1620 x ½"

    1620 x ¾"

    1620 x 1”

    2025 x ¾"

    2025 x 1”

    2532 x 1”

    2532 x 1 ¼"

    3240 x 1 ¼"

    3240 x 1 ½"

    1216 x ½"

    1620 x ¾"

    2025 x 1”

    2532 x 1 ¼"

    3240 x 1 ½"

    1216 x ½"

    1620 x ½"

    1620 x ¾"

    1620 x 1”

    2025 x ½"

    2025 x ¾"

    2025 x 1”

    2532 x 1”

    2532 x 1 ¼"

    2532 x 1 ½"

    Unequal Elbow(Reducing Elbow)

    Both the ends are connected to pipes of

    different sizes, eg. 1620 x1216. It means

    that one end is connected to pipe 1620 &

    the other to pipe 1216.

    1620 x 1216

    2025 x 1216

    2025 x 1620

    2532 x 1216

    2532 x 1620

    2532 x 2025

    3240 x 1216

    3240 x 1620

    Female Elbow Equal Elbow

    One end is connected to pipe & the other to

    male thread. For Eg. L 1620 X ½. It

    means that one end is connected to pipe

    1620 & the other to ½” male thread.

    Both the ends are connected to pipes of same

    sizes, eg. 1620 x 1620. It means that both

    the ends are connected to pipes 1620.

    1216 x 1216

    1620 x 1620

    2025 x 2025

    2532 x 2532

    3240 x 3240

    1216 x ½"

    1620 x ½"

    2025 x ½"

    2025 x ¾"

    2025 x 1”

    2532 x 1”

    1216 x 1216 x 1216

    1620 x 1620 x 1620

    2025 x 2025 x 2025

    2532 x 2532 x 2532

    3240 x 3240 x 3240

    1216 x ½" x 1216

    1620 x ½" x 1620

    2025 x ½" x 2025

    2025 x 1" x 2025

    2532 x ½" x 2532

    2532 x 1" x 2532

    1216 x 1620 x 1216

    1216 x 2025 x 1216

    1620 x 1216 x 1620

    1620 x 1216 x1216

    1620 x 1620 x 1216

    1620 x 2025 x 1620

    2025 x 1216 x 1216

    2025 x 1216 x 1620

    2025 x 1216 x 2025

    2025 x 1620 x 1216

    2025 x 1620 x 1620

    2025 x 1620 x 2025

    2025 x 2025 x 1216

    2025 x 2025 x 1620

    2025 x 2532 x 2025

    2532 x 1216 x 2532

    2532 x 1620 x 2025

    2532 x 1620 x 2532

    2532 x 2025 x 1216

    2532 x 2025 x 1620

    2532 x 2025 x 2532

    2532 x 2532 x 1216

    2532 x 2532 x 1620

    2532 x 2532 x 2025

    3240 x 1620 x 2532

    3240 x 1620 x 3240

    3240 x 2025 x 3240

    3240 x 2532 x 1216

    3240 x 2532 x 1620

    3240 x 2532 x 3240

    3240 x 3240 x 1216

    3240 x 3240 x 1620

    3240 x 3240 x 2025

    3240 x 3240 x 2532

  • Male Elbow Equal ElbowFemale ElbowEqual Straight Union

    (Straight Joint)

    Male Threaded Straight Union (Male Thread Adapter)

    Female Threaded Union(Female Thread Adaptor)

    Unequal Straight Union(Reducer)

    BRASS FITTINGS BRASS FITTINGS

    One end is connected to pipe, the other to a

    male thread, eg. 1620 x ½. It means that

    one end is connected to pipe 1620 & the

    other to ½” male thread. 1216 x 1216

    1620 x 1620

    2025 x 2025

    2532 x 2532

    3240 x 3240

    One end is connected to pipe, the other end

    to female thread, eg. 1620 x ½. It means

    that one end is connected to pipe 1620 &

    the other to ½” female thread.

    Both the ends are connected to pipes of same

    size, eg. 1620 x 1620. It means the both

    the ends are connected to pipes 1620.

    Both the ends are connected to pipes of the

    same size, eg. 1620 X 1620. It means that

    both the ends are connected to pipes 1620.

    1620 x 1216

    2025 x 1216

    2025 x 1620

    2532 x 1216

    2532 x 1620

    2532 x 2025

    3240 x 1620

    3240 x 2025

    3240 x 2532

    One end is connected to pipe, the other to a

    male thread. For Eg. S 1620 X ½. It

    means that one end is connected to pipe

    1620, the other to ½ male thread.

    One end is connected to pipe & the other to

    female thread. For Eg. S 1620 X ½. It

    means that one end is connected to pipe, the

    other to ½ female thread.

    Both the ends are connected to pipes of

    different sizes. For Eg. S 1620 X 1216. It

    means that one end is connected to pipe

    1620 & the other connected to pipe 1216.

    1216 x 1216

    1620 x 1620

    2025 x 2025

    2532 x 2532

    3240 x 3240

    Unequal Elbow(Reducing Elbow)

    Both the ends are connected to pipes of

    different sizes, eg. 1620 x 1216. It means

    that one end is connected to pipe 1620 &

    the other to pipe 1216.

    1620 x 1216

    2025 x 1216

    2025 x 1620

    2532 x 1216

    2532 x 1620

    2532 x 2025

    3240 x 1620

    3240 x 2025

    3240 x 2532

    1216 x ½"

    1216 x ¾"

    1620 x ½"

    2025 x ½"

    2025 x ¾"

    2025 x 1”

    2532 x 1”

    2532 x 1 ¼"

    3240 x 1”

    3240 x 1 ½"

    1216 x ½"

    1216 x ¾"

    1620 x ½"

    1620 x ¾"

    2025 x 1”

    2532 x 1¼"

    Equal Tee

    Three ends are connected to pipes of same

    sizes, eg. 1620 x 1620 x 1620. It means

    that the three ends are connected to pipes

    1620 each.

    1216 x 1216 x 1216

    1620 x 1620 x 1620

    2025 x 2025 x 2025

    2532 x 2532 x 2532

    3240 x 3240 x 3240

    Unequal Tee(Reducing Tee)

    The three ends are connected to pipes, with

    one or two ends different in size from the

    other end(s), eg. 2025 x 1620 x 1620.

    1216 x 1014 x 1216

    1620 x 1216 x 1620

    2025 x 1216 x 2025

    2025 x 1620 x 1620

    2025 x 1620 x 2025

    2025 x 2025 x 1620

    2532 x 1216 x 2532

    2532 x 1620 x 1216

    2532 x 1620 x 2532

    2532 x 2025 x 2532

    3240 x 1620 x 3240

    3240 x 2025 x 3240

    3240 x 2532 x 3240

    Female Tee

    Middle end is connected to a male

    thread and the other two to pipes,

    eg. 1620 x ½ x 1620.

    1216 x ½" x 1216

    1620 x ½" x 1620

    1620 x ¾" x 1620

    2025 x ½" x 2025

    2025 x ¾" x 2025

    2025 x 1" x 2025

    2532 x ½" x 2532

    2532 x 1" x 2532

    Male Tee (Reducer)

    Middle end is connected to a female

    thread, the other two to pipes,

    eg. 1620 x ½ x 1620

    1216 x ½" x 1216

    1620 x ½" x 1620

    1216 x ½"

    1216 x ¾"

    1216 x 1”

    1620 x ½"

    1620 x ¾"

    1620 x 1”

    2025 x ½"

    2025 x ¾"

    2025 x 1”

    2532 x ¾"

    2532 x 1”

    2532 x 1¼"

    3240 x 1¼"

    3240 x 1½"

    1216 x ½"

    1216 x ¾"

    1216 x 1”

    1620 x ½"

    1620 x ¾"

    1620 x 1”

    2025 x ½"

    2025 x ¾"

    2025 x 1”

    2532 x ¾"

    2532 x 1”

    2532 x 1¼"

    2532 x 1½"

    3240 x 1”

    3240 x 1¼"

    3240 x 1½"

    One end is connected to

    pipe, the other to a

    female thread. For Eg.

    1216 x ½. It means

    that one end is connected

    to pipe 1216 & the

    other to ½ female

    thread.

    Female Threaded Gas Nozzle

    1216 x ½"

    One end is connected to

    pipe, the other to a male

    thread. For Eg. 1216 x

    ½. It means that one

    end is connected to pipe

    1216 & the other to ½

    male thread.

    Male Threaded Gas Nozzle

    1216 x ½"

  • Features InstallationInstalling the Vectus Composite Piping system in

    pneumatic and noble gas system is not only very easy

    but cost effective as well, as it doesn't require any

    involvement of heavy machines or highly skilled labor.

    Hence making the overall cost even much lesser than

    any other system.

    1. Cut the composite pipe at right angled into length

    with Ratchet pipe cutter.

    2. Insert the compression nut and split ring into the

    pipe.

    3. Rounding of the pipe is required with the help of a

    calibrating tool.

    4. The smooth edge should now being chamfered, so

    that it can be fitted inside the fitting

    5. Tighten the external compression nut, which will

    ensure that it remains air tight and doesn't fail at

    designed pressure.

    In addition, Vectus Composite Piping system gives

    great flexibility when it comes to the installation. It

    can be maneuvered easily as per the requirement even

    after installation, hence, adding to the cost saving part

    and increasing the productivity of the entire system.

    Test Pressure at different temperatures

    1014

    1216

    1620

    2025

    2532

    3240

    4050

    3.00

    2.70

    2.60

    2.30

    2.20

    2.10

    2.50

    2.50

    2.50

    2.10

    2.00

    1.90

    Test Pressure

    (Mpa) at 20°C

    for 1 hour

    Test Pressure

    (Mpa) at 60°C

    for 10 hours

    Nominal Pipe

    Size (mm)

    Long Term Hydrostatic Test

    At 95°C for 170 hours

    1014

    1216

    1620

    2025

    2532

    3240

    4050

    1.3

    1.2

    1.0

    1.0

    0.9

    0.9

    0.8

    Nominal Pipe Size (mm) Test Pressure (Mpa)

    PEX

    PE

    PB

    PVC

    Vectus Composite Pipe

    Copper

    Galvanised Steel

    Stainless Steel

    500 mm

    450 mm

    375 mm

    200 mm

    59.50 mm

    41.25 mm

    28.50 mm

    27.50 mm

    Type of PipeExpansion (in mm)

    for a pipe length

    of 50m at 50°C

    1014

    1216

    1620

    2025

    2532

    3240

    4050

    7.0

    6.0

    5.0

    4.0

    4.0

    3.5

    3.5

    2100

    2100

    2400

    2400

    2700

    2700

    2700

    Min. Burst

    Pressure (Mpa)

    Minimum Pipe

    Ring Strength (N)

    Nominal Pipe

    Size (mm)

    Pipe Ring Strengths at 23°C & Burst Pressure of PE-AL-PE Pipe

    Technical Specifications

    T h e r m a l C ond u c t i v i t y : T h e T h e r m a l

    Conductivity of a Vectus Composite Pipe is 0.45

    W/m-K, about 1/100 than that of a steel pipe, but

    only several times higher than that of insulation

    material.

    Chemical Resistance: The inside and outside

    Polyethylene is a symmetrical & non polar material

    with a stable characteristic. At normal temperature,

    it does not dissolve in any solution and is resistant

    against various kinds of acids, alkali & salts.

    Hygienic Property: They are hygienic, rust free,

    non-toxic & resist growth of micro-organisms. Thus,

    these pipes prevent contamination of water. The

    Vectus Composite Pipes have passed the test of NSF

    61 (USA) policy & received the approval of TZW

    Germany & WQC UK. As medical & oxygen supply

    pipes, they are absolutely safe & the purity of the

    media these pipes carry is maintained at all times.

    Burning Resistance: The PE-AL-PE composite

    structure gives the pipes a much better burning

    resistance as compared to any other Polyethylene

    pipes. In the test, the burning resistance of the

    Vectus Composite Pipes reached grade BL & GB

    8624 stipulations for wire & cable conduit plastic

    materials.

    Hydraulic Function: The roughness coefficient of

    a Vectus Composite Pipe is 0.007. The inside wall is

    very smooth, scale free & low flow resistance. This

    makes the pipes ideal for carrying fluids. Due to the

    hard but flexible composite structure, the lashing

    pressure is quickly eliminated, thus no disturbing

    sound occurs.

    Installation: These pipes are bendable but never

    spring back and do not deform under pressure. They

    can be directly installed from 50 to 200 meters;

    decrease the need for a lot of fittings and

    attachments, are easy to install and save a lot of

    installation time.

    Coefficient of Heat Expansion: Vectus Composite

    Pipes have a low coefficient of Heat Expansion of

    25×10-6m/m-K. The low expansion coefficient is

    due to the adhesive layer which eliminates the

    differential expansion of plastic and metal.

    Other Advantages: The core layer of aluminium

    guarantees static resistance, lightness and gas &

    oxygen tightness. It also prevents growth of micro-

    organisms inside the pipe and ensures safety in

    water and gas supply. Not effected by frost and its

    high thermal preservation saves energy thus

    enhancing the efficiency of the system.

  • VECTUS INDUSTRIES LIMITEDA -36, Sector 83, Noida 201305, UP • Tel.: 0120-4753200E-mail: [email protected] • CIN No: U25202MP2007PLC019781

    Vectus Group BrandsDownload the

    VECTUS app from

    QR Code

    Pan India

    Sales & Support

    Network

    Corporate Office

    Factory

    Regional Office (Depot)

    Marketing Office

    Tumkur

    Trichy

    Kashipur

    Banmore

    Kanpur

    Bhopal

    Indore

    Raipur

    Noida

    Haridwar

    Kolkata

    Sikandarabad

    Bangalore

    Jaipur

    Ahmedabad

    Dahej

    UnaJalandhar

    Jammu


Recommended