Composite Resin Developments LimitedIntroduces

Compensators designed for Glass Reinforced Pipes

CRD InnovationCompensators designed for Pipes

For the Ship OwnerOperational Advantages•Compensates for differential movement between hull and pipes:•Compensates for different coefficients of expansion:•Reduces noise and fatigue failure:

Eliminates many “in service” failures

For the Ship BuilderInstallation Advantages•Provides linear, angular and axial flexibility:•Delimits pipe run limitations:•Extends permissible dimensional tolerances:

Speeds construction –

Eliminates many budget overruns

Classification Society Type Approvals for Marine and Offshore Use

Composite Resin Developments Ltd

Compensator Range suitable for Marine, Offshore and Land Based Applications

ERV Yellow Steel

ERV Red

ERV Yellow

Other materials available

Butyl/EPDM

NBR

NBR + Steel Reinforcement

Petroleum based products, High Octane Fuel, contaminated sea water

As yellow band – approved for use in machinery spaces

Viton, PTFE, and others

Technical information on request

ERV RedDrinking, cold, warm and waste water; sea water; ; Grey & Black Water, Ballast, Fire Mains; HVAC

Other materials

Standard Size Range 1.0 in (25mm) – 12 in (300mm)

Special compensators include circular up to 160 in (4000 mm); square; rectangular and square to circular configurations.

Moulded Flanges Standards: ANSI; DIN; ISO, BS and JIS

By

Composite Resin Developments LimitedUsing Proven High Performance reinforced Isotropic

Epoxy Resin Systems

Outstanding Corrosion Resistance Significant Weight Savings

Lower Costs

Composite Resin Developments Ltd

Composite Resin Developments Ltd Standard Range

Standard Bellows

25 mm – 1000 mm NB

Full Bellow Range to 4,000 mm

Tied Bellows25 mm – 1000 mm NB

Full Bellow Range to 4,000 mm

Composite Resin Developments Ltd Standard Range

Angular Rotation

+/- 30°

+/- 20°

+/- 12°

+/- 8°

+/- 5°

DN 25-80

DN 100-150

DN 200-300

DN 350-600

DN 700-1000

Minimum

- 30 mm

- 30 mm

- 30 mm

- 40 mm

- 40 mm

Maximum

+ 30 mm

+ 30 mm

+30 mm

+35 mm

+35 mm

Lateral Offset

+/- 20 mm

+/- 20 mm

+/- 20 mm

+/- 20 mm

+/- 20 mm

Configurations are available to provide greater angular rotation if required.

Composite Resin Developments Ltd

• Example of estimated service life for a one type of polymer/reinforcement combination. Similar information is available for all materials offered.

•

Service time in years ½ 1 2 3 4 5 6 7 8 9 10 15 20

80

60

40

20

Average insertion loss across frequency range Noise level reduction

Pipe Runs where required

Cross Deck-head Compensator

Composite Resin Developments Ltd

Composite Resin Developments Ltd Special Developments

Multi-arch compensators: For added linear; lateral offset and angular rotations.

Composite Resin Developments Ltd Future Developments

Stub Flanges for rapid pipe to flange connection

Composite Resin Developments Ltd

Wherever corrosion resistance and weight savings

at economic costs are issues

The Components Division ofComposite Resin Developments Limited

can provide solutions – just contact

Neil Huntley on +44.1843.223045

Unit J1G Channel Road, Westwood Industrial Estate

Margate, CT9 4JS, England

T; +44.1843.223045 e-mail: neil@compresdev.co.uk, Web: www.compresdev.co.uk