MPTCOMPRESSION PACKINGPROCESSING MACHINES
MPT 22
The MPT22 braided packing cutting machine automatically cuts at a programmable length braided packings with different sizes and shapes. The machine is also able to achieve sharp cuts with braided packings with stainless steel wire reinforced.
15mm - 1120mm
AUTOMATIC BRAIDEDPACKING CUTTING MACHINE
45° to 60° cut
MPT 23
The MPT23 machine is a pneumohydraulic goosen press equipped with a rotating table made of four stations. These four stations house the moulds where the raw material is pressed. The operator can also work with a single station, mainly when small batches of gaskets are processed. The raw material to be used is braided packing to obtain braided packing rings or wound graphite to obtain die-moulded rings.
13 tons pressing force
PRESS MACHINE FOR GRAPHITERINGS AND BRAIDED PACKING RINGS
Max 112 mm Ø
MPT 21
The MPT21 braided packing cutting machine automatically cuts at a programmable length braided packings with different sizes and shapes. . It is also possible to add a second angle, making an oblique cut with two combined angles up to 45°+45°, making the packing resistant in two directions (flange compression and blowout).
Special oblique cuts
AUTOMATIC BRAIDEDPACKING CUTTING MACHINE
30° to 90° cut
MPT 24
Finally the GSKET solution to automate a process that is usually achieved manually. This will help you save time and give an added value to your process. The MPT24 machine automatically winds and cuts at a programmable length the graphite strip to be pressed to obtain die-moulded rings. GSKET presses MPT70 and MPT30 already include such processes. This machine can also be used as complementary machine to GSKET press MPT23 for the production of die-moulded rings.
AUTOMATIC MACHINE FORWINDING GRAPHITE ROLLS
12 - 120 mm Ø
MPT70 and MPT30 machines form compacted packings (die moulded rings) using graphite strips or other similar material.These machines can work in two modes:a) Semiautomatic: the operator feeds manually the pre-cut strips of graphite.b) Fully automatic: the graphite feeding is perfor-med automatically by the machine.All the machine functions and product parameters are controlled by a PLC, with programming panel.
70/30 tons pressing force
AUTOMATIC PACKING PRESSWITH SINGLE MOULD
Max 120 mm Ø
MPT 25
Perfect density of your gasket automatically controlled and selected through a precision scale. It can be used as a stand-alone machine or incorporated into any packing press model.MPT25 weighing machine is complementary to MPT24, MPT70, MPT30, MPT23 machines.
AUTOMATIC WEIGHINGMACHINE
Precision digital scale1/1000 g resolution
MPT 70 30
PATERNITY SAFETY MATERIALS ASSISTANCEWHY GSKET? Visit: GSKET.COMQUALITYPATENTS