Date post: | 07-Feb-2019 |
Category: |
Documents |
Upload: | truongnguyet |
View: | 230 times |
Download: | 0 times |
Anglotech: the alternative to costly original parts
We are specialized in producing, stocking and selling spare parts (non genuine or from Original Equipment Manufacturer) for most common brands used in engine rooms.
Anglotech was founded in 1998 in the strategic international logistic location of La Spezia, starting business with air compressors spares and later widening its range of spare parts for pumps, refrigerator compressors, vacuum sewage systems and filters.
We started selling separators, purifiers and heat exchanger spares in 2012 with Sepur which is our personal brand.
Because we boast a long term experience and a vast warehouse, that
counts over 10,000 parts, we can offer most of the spares needed in engine rooms at the right price and we can proudly state that we are the best alternative to the costly original spares.
ANGLOTECH AT 360°
REVERSE ENGINEERING
SPARE PARTSPRODUCTION
COMPRESSORS
PUMPSSEPARATORS& FILTERS
STOCKING
FORWARDING
VACUUM SEWAGE SYSTEMS
AIR COMPRESSORSWe have an extensive stock of O.E.M. and
alternative spare parts for most marine air compressor brands.
Over the last 15 years our partners’ workshops have produced spare parts in accordance to the most stringent international quality standards.
This allows us to provide all the necessary components to overhaul a compressor, from small gaskets to pistons, valves and bearings.
IMPROVEMENTS AND QUALITY CONTROL
Thanks to our reverse engineering and the department’s constant research we have expanded our range, to main spare parts such as, cylinders, coolers and crankshafts.
We run tests run our spare parts on compressor units that we have in stock, to certify their correct performance.
Cooler J.P. SauerCylinder liners J.P. Sauer
Piston and connecting rods Hatlapa
TECHNICAL EXPERIENCE
Our products are suitable for:
PISTON COMPRESSORS
Sperre, NorwayAll models and kits for maintenance and overhauling
Hatlapa (MacGregor), GermanyAll models
Tanabe, JapanAll models
Hamworthy, U.K.All models
J.P. Sauer & Sohn, GermanyAll models
SCREW COMPRESSORS
Tamrotor, NorwayMost models
Alup Air Compressors, GermanyMost models
VACUUM COMPRESSORS
Rietschle Thomas/Gardner Denver, U.S.A.Most models
BREATHING AIR COMPRESSORS
Coltrisub, ItalyAll models
Anglotech is not directly affiliated to any brand or maker.The use of the part number/model/type and name is for reference only.This does not mean that Anglotech parts are supplied by original makers.Complete J.P. Sauer compressor reconditioned in our workshop.
Valves J.P. SauerCranckshaft Sperre
RECONDITIONING SERVICE FOR AIR COMPRESSORS
We have been offering a repair and reconditioning service for major air compressor brands since 2010.
SPERREJ.P. SAUER HATLAPAHAMWORTHYTANABE
Our overhauling: full disassembly crankshaft measuring and
bearing replacement Installation of overhauling
kit 4000/5000 hours (valves, safety valves, piston rings, manometers, filters, gudgeon pins, bearing bush, gaskets etc) single part check worn out part replacement: re-assembling running and loading at 30
bars final painting wooden box packing
In addition the following accessories can be installed:
anti vibration dampers solenoid valves pressure switches non return valves flexible hoses
Every reconditioned compressor is delivered with:
6-months warranty certificate running test certificate instruction manual spare parts book.
Air bottle
2TF5 Hamworthy
REFRIGERATOR COMPRESSORS
We have an advanced knowledge of all leading brands of refrigerator compressors and ancillaries.
We supply a wide range of spare parts:
Connecting rods
Crankshafts
Cylinder liners
Pistons
Bearings
Pins and bushes
Valve plates and valves
Oil pumps gears
Gaskets kits
Shaft seals and cover plates
REPAIR AND RECONDITIONING
We recondition and test refrigerator compressors in our workshop.
Every machines is dissasembled, completely overhauled and delivered with a 6 months warranty.
Carrier reconditioned compressor
Bearing cover Bock
Shaft seal Bitzer
COMPRESSOR TYPES
Our products are suitable for:
Sabroe, DenmarkAll models
Carrier, U.S.A.All models
Stal, SwedenMost models
Bitzer, GermanyMost models
Bock, GermanyMost models
Dorin, ItalyMost models
York, U.S.A.Most models
Daikin, JapanMost models
Anglotech is not directly affiliated to any brand and makers. The use of the part number/model/type and name is for reference only.It is not intended that Anglotech parts are supplied by original makers.
Cranckshaft bushing Sabroe
PUMPSOver the last 15 years we have been selling marine
pumps spare parts for a vast range of international brands.
Thanks to signed agreements with certified workshops, we have been able to develop and produce new spare parts and guarantee high quality standards to our customers.
This collaboration has allowed us to implement our network, warehouse and improve our competitiveness on the market.
OUR PRODUCTIONIMPELLERSSHAFTSMECHANICAL SEALS BEARING COVERSCOUPLINGSCASINGSMAGNETIC COUPLED PUMPSROTORS
COMPLETE PUMPS
We sell many types of complete pump units (with or without electric motors both centrifugal and screw types), which we can supply directly from certified and guaranteed makers.
Ring and nuts
SNF Pump casing insert with spindles
Iron Pump body and impellers
IMO kits
Pump shaft for CGC type
PUMP TYPESOur products are suitable for:
ALLWEILER211, 215, 216, AD, AE, AEB, AFI, AFL, AFT, BAS, CBWH, CLT, CNHB, CTWH, GS, L, LV, MA, MELO, MI, NAM, NB, NBWH, NHT, NI, NIM, NISM, NIT, NT, NTM, NTT, NTWH, SEBP, SEP, S100-SW, S3F, SLF, SLS, SNEF, SNF, SNH, SNS, SOB, SOHB, SON, SPF, SPZ, SRN, SRZ, SRZS, SZS, TECFLOW, TRE, TRF, TRILUB, TRL, ZAS, ZASV.
AZCUEMost of the types
BORNEMANNEL, V8, W.
GARBARINOMU, BT, BN, CN, P, IN, VAB, GH, G, VS, INML, MCA, VM
HAMWORTHY DOLPHINMost of the types
IMOACE, ACD, ACF, ACG, ACP, LPD, LPQ, ABQ
IRONQV, QVP, QVKL, QT, CHV, CMK, CNL, CNLB, BC, BDV, DHBF, DHBS, CVLS
THUNE EUREKAC2G, CGD, CGC, CAC, CGB, CGA, CAB, CGE, CAD, C12, C22, C42
JAPANESE BRANDSSHINKOKINZOKU, SHIN SHIN, TEIKOKU, NANIWA, ISHII, HEISHIN, SASAKURA, TAIKO KIKAI.
Anglotech is not directly affiliated to any brand and makers. The use of the part number/model/type and name is for reference only. It is not intended that Anglotech parts are supplied by original makers.
IMO gaskets and mechanical seals
Thune Eureka pump CGB
PARTS FOR VACUUMSEWAGE SYSTEMS
EVAC is part of Anglotech’s wide range of products!Our constant research and cooperation with
specialised companies have allowed us to develop and deliver high quality spare parts for vacuum sewage treatment devices at appropriate prices.
We are able to supply all spare parts for sewage treatment plants (knives, rotors, valves, shaft seals...) of the following models:
EVAC 90EVAC 900EVAC 910
and others…
Mini check valves
Push buttons
Control mechanism, water valve and discharge valve
Anglotech can now deliver Jets maintenance parts and commonly used spare parts for pumps and vacuum systems.
Thanks to our best-in-class knowledge and two decades of experience, we have developed a full range of replacement parts installed in commercial or cruise vessels.
Models available:
JETS 15 MB JETS 25 MB JETS 30 MB JETS 50 MB JETS 64 MB and others…
Anglotech can deliver alternative parts for Jets maintenance kits and commonly used spare parts for pumps and vacuum systems.Thank to our consolidated knowledged and two decades of experience, we have developed a full range of replacement parts installed on commercial or cruise vessels.
Macerator, rotor and hoses
Complete pump
FD valve
FILTERSOUR PRODUCT RANGE IN MARINE FILTRATION
Since 2014 we have supplied alternative spare parts for fuel and lub oil filters for variuos marine application without compromising quality and reliability.We are now one of the best alternative solution to the original spares for the following parts:
Diversion and full flow filter discsBy-pass filter elementsStrainersGaskets
Our products are compatible with:
ALFA LAVALMOATTIBOLL & KIRCH
Alternative filters
Moatti
News on www.anglotech.it
Anglotech srl Complesso Vincinella, 15 19037 Santo Stefano di Magra - La Spezia - ITALYPhone: +39 0187 984224 Fax: +39 0187 630839
E-mail: [email protected]