• Computer running DNC Software is attached to the existing network server that contains the NC Programs• No serial drivers needed. Communications to ORiON is via standard wireless (or wired) TCP/IP sockets• DNC System is con�gured to use TCP/IP sockets and functions identically to serial con�guration• ORiON sends and receives standard TCP/IP sockets. No serial conversion latency.• A separate Ethernet connection runs from the DNC computer to an industrial grade access point on the shop �oor
Current Network Server
No serial or other special drivers required
DNC System
Industrial Access Point
EXASNA M E R I C A
Conceptual Layout - ORiON™ DNC
Existing Network
Ethernet
RS232* (Serial)
Available USB Bar Code Reader
™ ORiON
• Available Program Storage Memory
• Built-in Drip-Feed, M198 and other advanced CNC Communications support
• Machine Data Collection and MTConnect Support
ORiON™ CNC Productivity Hub
USB Thumb Drive Operations
Remote Deskop Connection allows ORiON to function as a
thin client for Production Document Management and
other paperless manufacturing
*Optional Ethernet For newer CNCs with FTP, Mounted Drives and other protocols
413.566.0100www.nexasamerica.com