Div. of Scott Electric • 800-388-2232, #2403
Concrete, Masonry, Asphalt
DIAMOND BLADESStone & Specialty
All blades in the green columns can be used with angle grinders, cut-off saws, low HP walk-behind & joint widening saws.
SEGMENTED - FAST, SHARP, CONSISTENT CUTTING, GENERAL PURPOSE — A+ CONSISTENT PERFORMER
DESCRIPTION SIZE SINTERED LASER WELDED
• Concrete, Brick,Block
• General PurposeBond
SINTERED: A+Performance toCost Value
LASER WELDED: Longer life.
4.5" x .080 x 7/8"5" x .080 x 7/8"6" x .090 x 7/8"
7" x .090 x 7/8"-U8" x .090 x 7/8"-U9" x .090 x 7/8"-U
10" x .090 x 7/8"-U12" x .125 x 1"-20mm14" x .125 x 1"-20mm
16" x .125 x 1"-20mm
T4508CT0508CT0609C
T0709UT0809U188413
T1009U188415T1412E
T1612E
$9.00$11.00$18.00
$19.00$23.00$30.00
$35.00$65.00$85.00
$129.00
107728107729S0609C
S0709US0809US0909U
S1009US1212ES1412E
S1612E
$15.00$16.00$24.00
$33.00$38.00$45.00
$49.00$72.00$90.00
$130.00
TURBO CONTINUOUS RIM — FASTER, SMOOTH CUTTING, GENERAL PURPOSE TO HARD MATERIAL
DESCRIPTION SIZE TRADE PRO GRADE
Turbo rim forfaster, smoothercutting throughconcrete, brick,mortar, stone, etc
TRADE: ExcellentCost toPerformanceValue
PRO GRADE: Long life.
4.5" x .080 x 7/8"5" x .080 x 7/8"6" x .080 x 7/8"
7" x .090 x 7/8"-U8" x .080 x 7/8"-U9" x .100 x 7/8"-U
10" x .090 x 7/8"-U12" x .125 x 1"-20mm14" x .125 x 1"-20mm
TQ4508CTQ0508CTQ0609C
TQ0709UTQ0809UTQ0909U
TQ1009UTQ1212ETQ1412E
$7.00$9.00
$12.00
$15.00$16.00$24.00
$28.00$60.00$65.00
TP4508CTP0508CTP0609C
TP0709UTP0809UTP0909U
TP1009UTP1212ETP1412E
$21.00$24.00$34.00
$39.00$47.00$62.00
$70.00$95.00$117.00
SUPREME MAXX LIFE - MASONRY BLOCK to HARDEST STONE, LASER WELDED for DEEP CUTTING
• Concrete with X-Hard Aggregatewith Rebar, Granite / Stone, HardBrick/Pavers, X-Hard Mortar
• Extremely smooth cutting throughhardest materials with MAXX Life
• Old fashion segment shape + laserweld provides maximum life anddeep cutting without overheating
• OUR SIGNATURE BLADE: High-end diamonds and proprietarymatrix provides smooth cutting plusmaximum life through the hardestaggregates and granite includingBlack Absolute, Black Galaxy andBlue Pearl.
970929709397096
LW0709DMLW0809DMLW0909DM
LW1009U97097
180768
LW1411E97099
LW1612E
LW1812ELW2012ELW2414E
4.5" x .080 x 7/8"5" x .080 x 7/8"6" x .095 x 7/8"
7" x .095 x 7/8"-U8" x .095 x 7/8"-U
9" x .095 x DM-5/8"
10" x .095 x DM-5/8"12" x .110 x 1"-20mm12" x .125 x 1"-20mm
14" x .110 x 1"-20mm14" x .125 x 1"-20mm16" x .125 x 1"-20mm
18" x .125 x 1"20" x .125 x 1"24" x .140 x 1"
$27.00$28.00$35.00
$46.00$52.00$74.00
$82.00$104.00$109.00
$128.00$134.00$219.00
$268.00$298.00$418.00
Test Results Cutting BlackAbsolute Granite: Core CutHD Orange “sparked” andjumped, Supreme MAXX cutsmooth.
- Masonry Table Saw Blade -Impressive chip-free sawing through
the hardest materials includingglazed brick.
GREEN WAVE — SUPERIOR SPEED, PERFORMANCE, LIFE — HARD MATERIAL
Benefits of Wave Core:
• Adds stability to the steel core
• Draws in air to remove debrisfaster
- End result: Faster, cooler,smoother cutting withincredible blade life
• A+ on medium to x-hard materialplus chip-free cutting.
261112205582253598
GW0709UGW0809U
253594
GW1009UGW1212EGW1412E
4.5" x .085 x 7/8"5" x .085 x 7/8"6" x .090 x 7/8"
7" x .090 x 7/8"-U8" x .090 x 7/8"-U9" x .090 x 7/8"-U
10" x .100 x 7/8"-U12" x .118 x 1"-20mm14" x .118 x 1"-20mm
$22.00$23.00$32.00
$46.00$52.00$60.00
$78.00$95.00$119.00
COMBINATION, MULTI-CUT
WALL SAWING BLUE - REFRACTORY, GRANITE, X-HARD AGGREGATE w/ RebarBRONZE - Aggressive Cutting: CONCRETE w/ Rebar to ASPHALT
• Laser welded w/ 3 differentdiamond segments that includesunder cut protection to cutasphalt & concrete over asphalt
• Slanted directional segments andgullets - kicks away cuttings forvery aggressive / fast cutting
• Blue, P-Series refractory, granitehard concrete/aggregate w rebar
• Bronze, G-Series concrete withheavy aggregate and rebar
• Very Aggressive - Faster Cuttingthan our Supreme, Maxx Life Blade~ A+ for Wall Sawing.
G4508CG0508C
G0709DMG0809DMG1009U
G1212EP1212E
G1412E222187
G1612EP1612E
G1814EP1814E
P2014E
4.5" x .085 x 7/85" x .085 x 7/8
7" x .090 x 7/8"-DM8" x .090 x 7/8"10" x .090 x DM
12" x .125 x 1"-20mm“
14" x 125 x 1"-20mm“
16" x .125 x 1"-20mm“
18" x .142x 1" -20mm“
20" x .142 x 1"-20mm
$28.00$32.00
$49.00$54.00$79.00
$100.00
$120.00
$160.00
$198.00
$270.00
GRANITE, STONE, X-HARD BRICK — PRECISION CUTTING THROUGH CRITICALLY HARD MATERIAL
PROFESSIONAL GRADE
• Chip free, sharp cutting with easethrough critically hard material
• Razor-edge finish results on thehardest materials including brickwith ultra-hard finishes
• Cuts a wider range of hardmaterials including: Hard densebrick, granite, high alumina brick,refractory, silicon carbide, zircon.
PS1412E
PS2012E
14" x .125 x 1"
20" x .125 x 1"
$ 247.00
$ 447.00
MASONRY TABLE SAW — Brick / Block, Pavers, Hollow Block
Silent Core - Supreme Grade> 50% Sound Reduction!> Eliminates the high-pitch whine> Cut concrete, brick, block, pavers.
Block - Supreme Grade> High performance speed & life> Dual design for exceptional cutting speed with low vibration> High performance wear-resistant bond for dry cutting of soft, abrasive material> Exceptional blade life and cutting speed on large upright masonry saws.
SILENT CORE BLOCK
14" x .125 x 1"#SC1412E
18" x .145 x 1"#SC1814E
20" x .145 x 1"#SC2014E
$190.00#SC141
$310.00#SC18E
$370.004E
12" x .125 x 1"#MB1212E
14" x .125 x 1"#MB1412E
16" x .125 x 1"#MB1612E
20" x .142 x 1"#MB2014E
$150.00#SC141
$170.00#SC18E
$210.00E
$290.00#SC18E
Diamond Wave Blade - 3/32"
width removes concrete, epoxy andmortar from thin joints. Wave toothdesign provides superior performanceand life. Available in two arbor sizes.
1+ $28.00 ea 10+ $23.00 ea
#MT-385 Multi-Tool, #MT-385 Fein Super Cut 25+ $21.00 ea
TUCK POINTING BLADES
BLADE
Sandwich - Black Sandwich - Silver Solid - Pro Tuck Solid - Speed Tuck Solid - Trade Grade
FEATURE
• Extremely hardmortar cutting
• Significantly lighterthan a solid blade tohelp extend the lifeof the angle grinder
• General purpose tomedium hard mortar
• 30% faster cuttingvs. a solid grindingblade, shorter life
• 10 times < dust vs. asolid tuck blade
• PRO Grade - verysharp, smooth, fastgrinding
• Extremely hardmortar grinding
• Exceptional on hardmaterial with anglegrinders and jointsaws.
• General purpose tohard mortar
• If blade jumps or ischipping the brickgo with the SolidPro Tuck or BlackSandwich
• Tall 12mmSegment Height
• Soft to generalpurpose mortar
• Easy grinding, nojumping or chippingon soft to mediummortar
SIZE Part No. Price Part No. Price Part No. Price Part No. Price Part No. Price
4" x .250 XB0425C $33.00 XS0425C $24.00 SB045C $35.00 SK0425C $29.00 SS0425C $23.00
4.5" x .250 107369 $35.00 107284 $26.00 111876 $39.00 97100 $32.00 SS4525C $25.00
4.5" x .375 XB4537C $46.00 107302 $32.00 SB4537C $50.00 SS4537C $28.00
5" x .250 107380 $39.00 98054 $27.00 109092 $42.00 97101 $35.00 SS0525C $27.00
5" x .375 107460 $54.00 XS0537C $35.00 SB0537C $55.00 158109 $32.00
6" x .250 98123 $57.00 XS0625C $36.00 SB0625C $62.00 SS0625C $30.00
6" x .375 XS0637C $47.00 SB0637C $82.00
7" x .250 XB0725C $62.00 XS0725C $39.00 SB0725C $66.00 SK0725C $55.00 SS0725C $35.00
7" x .375 XB0737C $78.00 XS0737C $50.00 SB0737C $85.00 SS0737C $42.00
GLITTER BITS — DIAMOND TUCK POINTING BITS — Grinds hard mortar joints!
• Reaches into hard-to-get areas,finishes what a diamond bladecannot
• Prevents over cuts into adjacentmaterial
• Grind vertical brick joints, inside wallcorners, window and door brickreturns w/ precision control
• 4-1/4" bit for single brick removal• For use with a variable speed die
grinder, operated between 7,000and 10,000 RPM.
75533
75578
75581
1/8" x 3"
1/4" x 3.5"
1/4" x 4-1/4"
$ 34.00
$ 38.00
$ 47.00
JOINT WIDENING — Laser Welded, 10mm Diamond Segment Height
• Joint widening blades for use onwalk-behind saws
• Designed to reshape existingconcrete joints
• For 6" and 7" blades, use aboveTuck Point Blades - Pro Tuck.
W0825E-CW0837E-CW0850E-CW1212EW1237EW1450E
8" x .250 x 1" w PH - 7/8"8" x .375 x 1" w PH - 7/8"8" x .500 x 1" w PH - 7/8"
12" x .250 x 1" w PH12" x .375 x 1" w PH14" x .500 x 1" w PH
$ 74.00$ 94.00$225.00$290.00$350.00$560.00
Div. of Scott Electric 800-388-2232, #2403 www.USADustGuard.com
CRACK CHASING “V” BLADES
DESCRIPTION SIZE PREMIUM TRADE SERIES
Laser welded,V-shaped bladefor easy routingor followingcracks inconcrete
Also used tore-shapedecorativeV-shaped joints.
4.5" x .250x 7/8"4.5" x .375 x 7/8"5" x .250 x 7/8"5" x .375 x 7/8"5" x .500 x 7/8"6" x .250 x 7/8"6" x .375 x 7/8"7" x .250 x 7/8"7" x .375 x 7/8"
8" x .250 x 7/8"8" x .250 x 1" w/ hole
8" x .375 x 7/8"8" x .375 x 1" w/ hole8" x .500 x 1" w/ hole8" x .750 x 1"-20mm12" x .750 x 1"-20mm
CC4525C166479
CC0525CCC0537CCC0550CCC0625CCC0637CCC0725CCC0737C
CC0825CCC0825ECC0837CCC0837ECC0850ECC0875ECC1275E
$42.00$57.00$52.00$62.00$109.00$70.00$92.00$75.00$95.00
$85.00$85.00$110.00$110.00$190.00$500.00$900.00
TC4525CTC4537CTC0525CTC0537C
TC0725CTC0737C
TC0825CTC0837C
$39.00$48.00$45.00$54.00
$66.00$84.00
$72.00$94.00
TORNADO - Fast Cutting, X-Long Life on Extra Hard Material — Cuts concrete thru steel decking
• Fast, Smooth Cutting on X-HardMaterial with XL Life
• Mortar, Hard Brick/Pavers, Stone(Granite), River Rock, RefractoryApplications and more
• Unique Application: Concretecutting through thru steel deck.
TH4508CTH0508CTH0609UTH0709UTH0809UTH0909UTH1009UTH0809UTH0909U
4.5" x .087 x 7/8"5" x .087 x 7/8"
6" x .087 x 7/8"-U7" x .095 x 7/8"-U8" x .095 x 7/8"-U9" x .102 x 7/8"-U10" x .102 x 7/8"-U
12" x .125 x 1"/20MM14" x .125 x 1"/20MM
$24.00$29.00$38.00$49.00$54.00$76.00$92.00$124.00$149.00
WALK-BEHIND SAWS, 35 - 75 HP — Additional blade widths available, .145 to .500 ~ please call for price.
• Professional Cutters Walk-Behind Saw Blades
• Cured Concrete with DropSegments for Overlay Cutting
• Soft Bond for Hard Aggregate
• Fast cutting through extremelyhard, cured concrete with rebar
Cured Concrete & Overlay
XP1412EXP1612EXP1812EXP2014E
XP2415EXP2615EXP3018EXP3618E
Asphalt
XPA1412EXPA1612EXPA1812EXPA2014E
XPA2415EXPA2615EXPA3018EXPA3618E
Size 14" x .12516" x .12518" x .12520" x .145
24" x .15526" x .15530" x .18736" x .187
Price $ 240.00$ 275.00$ 320.00$ 380.00
$ 500.00$ 480.00$ 860.00$1,120.00
ASPHALT, GREEN CONCRETE — Laser Welded, 10mm Diamond Segment Height
• Laser Welded, Supreme Grade
• Designed for use with hand heldand low horsepower walk-behindsaws
• Perfect for Low HP Push Saws, 5 - 35 HP
• Dry / wet cutting, medium bond -Intended for use in mediumaggregate
• Very fast, smooth, sharp cutting,low cost ratio.
AG4509CAG0509CAG0610CAG0712UAG0809UAG0910C
AG1010CAG1212E
AG1412EAG1612EAG1814EAG2015EAG2415E
4.5" x .090 x 7/8"5" x .095 x 7/8"6" x .100 x 7/8"
7" x .125 x 7/8"-U8" x .095 x 7/8"-U9" x .100 x 7/8"-U
10" x .100 x 7/8-5/8"12" x .125 x 1"-20mm
14" x .125 x 1"-20mm16" x .125 x 1"-20mm18" x .142 x 1"-20mm20" x .155 x 1"-20mm24" x .155 x 1"-20mm
$34.00$38.00$50.00$70.00$75.00$84.00
$96.00$125.00
$160.00$175.00$210.00$265.00$350.00
Div. of Scott Electric • 800-388-2232, #2403
Diamond Blades
STONE & SPECIALTYSharp, Clean Finish Edge
SKINNY BLADES
• For cutting very thin butter joints,porcelain, glazed brick, etc.
• Smooth, fast, chip-free cutting. Reinforced center core for addedstrength
SB4505C
SB0505C
SB0755C
4.5" x .060 x 7/8"
5" x .060 x 7/8"
7" x .060 x 7/8"/U
$28.00
$32.00
$44.00
AZ DEMOLITION - Premier Oil & Gas Pipeline Cutting Blade — Outlasts an abrasive blade 100:1. Cuts through Padlocks, Cast Iron, Angle Iron, Rebar, Steel, Block & Brick, Wood, High-Density Polyethylene (HDPE), PVC, Plastic(lumber, bottles), Bullet Proof / Tempered Glass, Fiberglass, Ductile, Ductile Iron, Reinforced Concrete*.
Similar to an Abrasive Blade - Advantages vs. Abrasive Blade: Much Safer, More Versatile, Longer Lasting, 90% Less Sparks,Can Be Used Wet, Virtually Eliminates Vibration & Breakage for Improved Operator Comfort & Safety, Steel Core Retains its Sizethroughout the Blade's Entire Life, Low or NO Odor, Less Debris and Dust - only from the material being cut.
1. Cuts through a wide range ofmaterial at a moment’s notice
2. Laser welded vacuum braiseddiamonds adhered to the gullets
3. Engineered perimeter holes andslots for smooth cutting & cooling
4. Sides on the 14" blade are impregnated in a swirl patternwith silicon carbide for beveling
* Reduced life when just cutting concrete
AZ4511CAZ0511CAZ0612C
AZ0712UAZ0812UAZ0912U
AZ1012UAZ1214EAZ1414E
AZ1614EAZ1814EAZ2015E
4.5" x .050 x 7/8"5" x .050 x 7/8"6" x .073 x 7/8"
7" x .055 x 7/8"-U8" x .125 x 7/8"-U9" x .063 x 7/8"-U
10" x .125 x 7/8"-U12" x .125 x 1"-20mm14" x .125 x 1"-20mm
16" x .125 x 1"-20mm18" x .145 x 1"20" x .155 x 1"
$36.00$40.00$56.00
$65.00$89.00$99.00
$119.00$160.00$210.00
$225.00$335.00$398.00
DUCTILE IRON, CONCRETE WATER MAINS - Hard Material Cutting
1. Segmented Diamond Rim forLonger Life, Aggressive Cutting
2. Concrete & Cast Iron Pipe
3. Side plating for added steel coreprotection through the cut
4. 5mm (.196") diamond segmentheight.
DI1211EDI1212E
DI1411EDI1412E
DI1612E
12" x .110 x 1"/20mm12" x .125 x 1"/20mm
14" x .110 x 1"/20mm14" x .125 x 1"/20mm
16“ x .125 x 1”/20mm
$154.00$174.00
$179.00$220.00
$245.00
FLUSH CUT ADAPTER - for Diamond Blades, 4-hole Mount
1. Designed to extend diamondblades beyond the grinder arboror to flush cut surfaces
2. With 5/8"-11female arbor toconnect with grinders polishers
3. Four screws included with eachadapter.
#FCA
For use on any small diameterblade with flush mount holepattern.
Allows flush cutting and deeperpenetration with the blade.
Provides easy blade changing,blade is spun on and off - nomore locking nuts!
$14.60
STONE / TILE BLADES - Lapidary, Ultra-Thin, High Precision
J-slot (diameters 4.5 - 12") aroundthe edge of the blade helps todissipate heat for increaseddurability, extended blade life andfaster cutting speeds.
1. Produces smoother cut, lastslonger and cuts faster thannotched rim or plated diamondblades.
2. TB Series - wet sawing.
3. TD Series - dry sawing.
4. Cuts Ceramic, Porcelain, NaturalStone, Rocks, Minerals,Gemstones, Glass, Terrazzo andLaboratory Specimens.
5. Provides a clean cut with razor
sharp edge finish.
TB4506C
TB0506C
TB0606C
TB0706C
TB0806C
TB1006C
TB1208U
TB1208M
B2010M
TD4506C
TD0506C
TD0606C
TD0706C
TD0806C
TD1006C
4.5" x .060 x 7/8" - 7MM
5" x .060 x 7/8" - 7MM
6" x .063 x 5/8" - 7MM
7" x .063 x 5/8" - 10MM
8" x .063 x 5/8" - 7MM
10" x .065 x 5/8" - 10MM
12" x .080 x 1"-20mm - 10MM
12" x .080 x 60MM - 10MM
20" x .100 x 50/60MM
4.5" x .050 x 7/8" - 8MM
5" x .050 x 7/8" - 8MM
6" x .060 x 7/8" - 8MM
7" x .060 x DM" - 8MM
8" x .060 x 5/8" - 8MM
10" x .060 x 5/8" - 8MM
$14.00
$17.00
$24.00
$42.00
$45.00
$75.00
$110.00
$110.00
339.00
$22.00
$24.00
$32.00
$44.00
$54.00
$70.00
ELECTROPLATED BLADE - Premium Grade, for Marble, Tile, Travertine
4 Hole Flush Cut
1. 2mm (.078") segment height
2. Unique design for calcium basedstones like marble, travertine,bluestone, etc.
3. Dramatically cleaner cuts thanany other turbo or segmentedblade
4. Flush mount adapter ready toallow cutting and shaping withoutchanging tools.
See Flush Cut Adapter
EB4506CEB0506C
4.5" x .060 x 7/8"-5/8"5" x .060 x 7/8"-5/8"
$54.00$60.00
CUTTER GRINDER - Cut and Grind with One Blade
1. With flush mount holes (4)
2. Unique 2-in-1 blade, cuts andgrinds the hardest materials likegranite, engineered stone,flagstone and concrete paverswith ease!
CG4510CCG0510CCG0610C
CG0710C
4.5" x .100 x 7/8"5" x .100 x 7/8" 6" x .100 x 7/8"
7" x .100 x 7/8"
$75.00$82.00$96.00
$126.00
ADDITIONAL STONE PRODUCTS - Call for pricing
Granite | Marble Low Profile Cup Wheels Contour Cutting Polishing
4 Hole Flush Cutting & GrindingSee Flush Cut Adapter