CONDOR CHRONOGRAPHCONDOR AUTOMATIC
OPERATION MANUAL
• Swiss made ETA G10.711 quartz chronograph movement
• Date display window
• Solid 316L steel case
• Domed mineral crystal with anti-reflective coating
• Super-LumiNova system on hands
• Water resistant to 330ft/100m
• Diameter 40mm, thickness 16mm, wt 3.8oz.
• Serial numbered
• 2 year international warranty
SpecificationS
CONDOR CHRONOGRAPHTechnical Specifications
a: DiSpLaY
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
25
20
35
40
05
1015
55
5045
CHASE
Minute hand
Pushbutton:START/STOP
30 minutes timer
Hour hand
Second hand
a
B
1/10 secs timer
Date indication
Setting crown
Pushbutton:Split-Time Reset to zero
a-1: MoDe cHRonoMetRaGe / fUnction cHRonoGRapH
WARNING:Before setting the time, the hands should be returned to their original position. If necessary reset to zero with pushbutton B.
1 to 3 order of functions
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
25
20
35
40
05
1015
55
5045
CHASE
a
B
Setting crownin position 1
1
Reset tozero 3
START 1STOP 2
ADD FUNCTION: Order in which pushbutton should be pressed.
B
Reset to zeroX
START
1
STOPRead
2
START
3
STOPRead
4
a
a-2: tiMinG MoDe / SpLit-tiMe oR inteRMeDiate tiMe fUnctionS
1 to 7 order of functions
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
25
20
35
40
05
1015
55
5045
CHASE
START 1
Setting crown in position 1
1
a
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
25
20
35
40
05
1015
55
5045
CHASE
RESTART(catching up)
3
1
B
SPLIT 1ReadTIME 1-11 minutes-26 seconds-5/10 secs.
2
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
25
20
35
40
05
1015
55
5045
CHASE
RESTART(catching up)
5
1
aSPLIT 2ReadTIME 2-18 minutes-3 seconds-7/10 secs.
4
B
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
2520
35
40
05
1015
5550
45
CHASE
ReadLAST TIME-27 minutes-14 seconds-8/10 secs.
STOP 6
1
a
BReset tozero 7
B: Date coRRection c: tiMe coRRection
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
25
20
35
40
05
1015
55
5045
CHASESetting crown in position 2
Setting date by turning crown counter-clockwise
1 2
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
STOP
DURER
25
20
35
40
05
1015
55
5045
CHASE
Setting crown in position 3STOP-SECOND
HOURS/MINUTESDate changes each time hour hand passes midnight
1 2 3
HOURS/MINUTES
D: ReSettinG cHRonoGRapH HanDSThe chronograph hands can be set at zero or at real time.
PUSHBUTTONS: Press longer than 1 second to turn quickly.
NOTE: Do not keep setting crown in position 2 for more than 20 minutes (time could be lost). When setting crown is pulled out to position 3, movement will stop immediately (STOP SECOND).
CONDORAUTOMATIC
CONDORCHRONOGRAPH
30
20 10
10
60
30
40
50 10
20
DURER
2520
35
40
05
1015
5550
45
CHASE
1 2 3Setting crown
Set the Seconds timer at 0
Set the 30 minutes timer at 0
Set the 1/10 seconds timer at 0
CONDORAUTOMATIC
• Miyota 8215 automatic movement
• Date display window
• Exhibition back
• Solid 316L steel case
• Domed mineral crystal with anti-reflective coating
• Super-LumiNova system on hands
• Water resistant to 330ft/100m
• Diameter 40mm, thickness 16mm, wt 3.8oz
• Serial numbered
• 2 year international warranty
SpecificationS
CONDOR AUTOMATICTechnical Specifications
Setting Crown Positions
1 > Winding position.
2 >> Setting the time.3 >>> Stops second hand, setting minute and hour hands position.
WATCH HANDS
CONDORAUTOMATIC
7
DURER
3025
20
35
40
05
1015
55
5045
CHASE
Minute hand
Hour hand
Setting Crown
Second hand
Date window
WinDinG / SettinG Date anD LocaL tiMe
NOTE: Date position may be located at different position depends on models.
CONDORAUTOMATIC
7
DURER
3025
20
35
40
05
1015
55
5045
CHASE
Postion 1 :
Automatic winding watch can also be hand
wound by turning the crown in Position1.
Wind 15-20 times and it will start to move
naturally after shaking slightly.
Winding the mainspring
Postion 3 :
1. Pull the crown out to Position 3.
2. Turn the crown to set hour and
minute hands.
3. Push the crown back to Position1.
Setting the time
Postion 2 :
1. Pull the crown out to Position 2.
2. Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and 4:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
Setting the date
ETA G10.711 (CONDOR CHRONOGRAPH)
MIYOTA 8215 (CONDOR AUTOMATIC)
CHASE-DURER9601 Wilshire Blvd. #1118Beverly Hills, CA 90210 USATel: 800.544.4365 / 310.550.7280Fax: 310.550.0830E-mail: [email protected]
www.chase-durer.com
© Copyright 2007 CHASE-DURER LTD all rights reserved.