37
XXIV conference program Materials, Interfaces, Processes in Industrial and Basic research applications P N S E M B V 56° anniversario
XXIVconferenceprogram
Materials, Interfaces, Processes in Industrial
and Basic research applications
P N
S
E
M
B
V
56° anniversario
partnerslocationorganizationConference chairOrganizing committeeScientific committeeOrganizing secretary
contents
3456789
program*
Preliminary conference May 08thOpening
Conference session May 08thMicro and Nano Scale Engineered Coatings and Films
Innovation in Large Vacuum System
Renewable Energies and Environment
Surface Science and Biointerfaces
Poster Session
Conference session May 09thNuclear Fusion Technology
Renewable Energies and Environment
Materials and Technology for Additive Manufacturing
Conference session May 10thNuclear Fusion Technology
Renewable Energies and Environment
Materials and Technology for Additive Manufacturing
coursesBasic Vacuum TechnologyHorizon 2020 Project ManagementAnd Finance Courseassessment
AIVWhat is AIV56th anniversaryBoard of directors
1011
11
1213
15
16
17
18
2122
23
24
2526
27
28
293031
32
33343536
*You can register yourself in person at the conference also during the day on May 07th, from 2 to 6:30 pm
3
partners
UNDER THE PATRONAGE OF
SPONSOR
Conference Center
Hilton HotelMay 07 - 10th 2019
Viale Jannuzzo, 47, 98035 Giardini Naxos (ME)
4
location
5
organization
5
organization6
Conference chair
Chair:
Espedito Vassallo CNR, Istituto per la Scienza e Tecnologia dei Plasmi ISTP, Milano
Co-Chair:
Antonio Terrasi Università di Catania, Catania, Italy
organization7
Organizing committee
L. Scaltrito Politecnico di Torino
E. Maccallini Saes Group
S. Ferrero Politecnico di Torino
A. Lamberti Politecnico di Torino
G. Melis Politecnico di Torino
S. Cerdonio Agilent Technologies Italia
S. De Angelis Air Liquide, Catania
organization8
Scientific committee
P. Ossi Politecnico di Milano
S. Dal Bello Consorzio RFX, Padova
F. Fracassi Università di Bari
F. Ghezzi Istituto di Fisica del Plasma, CNR, Milano
A. Tagliaferro Politecnico di Torino
C. F. Pirri Politecnico di Torino & IIT, Center for Sustainable Future Technology at Polito
M. Rocca Università di Genova
R. Cimino INFN, Frascati
M. Cocuzza Istituto dei Materiali per l’Elettronica ed il Magnetismo, CNR, Parma
G. Mazzitelli ENEA, Frascati
F. Di Fonzo IIT, Center for Nanoscience and Technology at Polimi, Milano
G. Speranza FBK, Trento
S. Gammino Laboratori Nazionali del Sud, LNS/INFN, Catania
G. Ceccone JRC-ISPRA
P. Michelato INFN - LASA Segrate, Milano
D. Crippa LPE, Bollate
S. Magazù Università di Messina
organization9
Organizing secretary
Angela Riggio
3485465168
c/o Istituto di Fisica del Plasma CNR Via Cozzi, 53 - 20125, Milano, Italy
10
The conference program will feature oral and poster presentations
that provide scientific information and
ideas relevant to the topic sessions
You can register yourself in person at the conference also during the day on May 07th, from 2 to 6:30 pm
program
10
11
9:00 | 9:20Prof. Luciano Scaltrito Opening of the Conference by AIV PresidentProf. Salvatore Cuzzocrea Magnifico Rettore - Università di MessinaDr. Espedito Vassallo Introduction by the Chairman of the Scientific Committee
program
Preliminary conferenceMay 08th
OPENINGroom tindari B
12
9:20 | 10:00 Marco Borra Stazione Zoologica “Anton Dohrn”, Naples, Italy
Technologies for exploring and exploiting from the macro to the microscopic resources in marine ecosystems and understanding human interactions
10:00 | 10:30Coffee Break
ConferencesessionMay 08th
program
PLENARY LECTUREroom tindari B
May08th
13
Conferencesession
Chairmen: F. Di Fonzo, F. Fracassi, P. Ossi
10:30 | 10:55Maria Dinescu National Institute for Laser Plasma and Radiation Physics, Romania
Lasers in soft material engineering: Laser Direct Writing via Multi Photon Absorption and Laser Induced Forward Transfer
10:55 | 11:20 Francesco Antolini ENEA Photonics Micro and Nanostructures Laboratory, Fusion and Nuclear Security Department, Frascati, Rome, Italy
Micro Quantum Dot-Light Emitting Diode and Organic Light Emitting Diode Direct Patterning (MILEDI)
11:20 | 11:45 V. Mollica IPCF-CNR, Istituto per i Processi Chimico-Fisici, Messina, Italy
SERS and DFT study of indigo adsorbed on silver nanostructured surface
11:45 | 12:10Milena Salvo Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
Surface pre-treatments to improve joint strength of ceramics
12:10 | 12:35Claudia Triolo Departimento di Scienze Matematiche e Informatiche, Scienze Fisiche e Scienze della Terra, University of Messina, Messina, Italy
Generation of Plasmon-Vortex around a single elliptical nanohole in a gold film
12:35 | 13:45 Lunch
13:45 | 14:10Davide Mariotti Ulster University, UK
Atmospheric pressure plasmas for energy materials
14:10 | 14:35Vincenza Armenise Department of Chemistry, University of Bari, Italy
Atmospheric pressure cold plasma functionalization of 3D polyurethane foams and heavy metal ions adsorption from water
14:35 | 15:00Matteo Pedroni CNR, Istituto di Fisica del Plasma, Milano, Italy
Development of a BiVO4/WO3 system by plasma magnetron sputtering for photoelectrochemical water splitting
15:00 | 15:30
Coffee Break
MICRO AND NANO SCALE ENGINEERED COATINGS AND FILMS
room tindari B
May08th
14
Conferencesession
15:30 | 15:50Antonella Milella Dipartimento di Chimica, Università degli Studi di Bari, Italy
Nanostructured iron oxide thin films as photoanodes for water splitting
15:50 | 16:10Francesco Montagner Institute of Condensed Matter Chemistry and Technologies for Energy (ICMATE), CNR, Padova, Italy
Protective hard ceramic coatings deposited via High Power Impulse Magnetron Sputtering
16:10 | 16:30Sebastiano Trusso IPCF - CNR, Istituto per i Processi Chimico-Fisici, Messina, Italy
Characterization of novel platinum - free nanostructured gold counter electrode for DSSCs prepared by pulsed laser ablation
16:30 | 16:50Cristina Balagna Department of Applied Science and Technology,Politecnico di Torino, Turin, Italy
Co - Sputtered nanostructured antibacterial coating on air filters
16:50 | 17:10Fiorese Tav Vacuum Furnaces SpA, Caravaggio (BG), Italy
Deposition of AlTiN Thin Films onto Additive Manufactured Parts in Ti6Al4V Alloy
17:00 | 18:15AIV Member meetingPoster session
May08th
15
Conferencesession
Chairmen: R. Cimino, E. Maccallini
10:30 | 10:55 Giuseppe Bregliozzi CERN, Ginevra, Switzerland
Vacuum technology at CERN: perspective for the next 10 years
10:55 | 11:15 Elena Buratin CERN, Geneva, Switzerland
Electron flux and pressure dynamic of the room temperature LHC Vacuum Pilot Sectoras function of beam parameters
11:15 | 11:35 Luisa Spallino Laboratori Nazionali di Frascati (LNF)-INFN, Frascati, Italy
Material properties of impact to accelerator’s performances in cryogenic vacuum
11:35 | 11:55 Antonio Pasqualetti European Gravitational Observatory Vacuum and Mechanics Department
Stato del sistema da vuoto di Virgo e sviluppi futuri: AdV+ e 3a generazione
11:55 | 12:15 C. Maccarrone The European Synchrotron Radiation Facility (ESRF), Grenoble, France
ESRF - EBS Upgrade Program Update
12:15 | 12:35 Vincenzo Formoso Dipartimento di Fisica, Università della calabria, Arcavacata di Rende (CS)
Non - destructive inspection of Hydrogenembrittlement of steel specimens performed with µ -Tomo station at STAR_lab
12:35 | 13:45 Lunch
13:45 | 14:10Giulia Lanza SLAC National Laboratory, Menlo Park, USA
Vacuum layout of LCLS - II
14:10 | 14:35G. Castro INFN – Laboratori Nazionali del Sud, Catania, Italy
Plasma diagnostics for the ESS Proton Source
14:35 | 15:00Fabrizio Siviero SAES Getters S.p.A., Lainate, Milan, Italy
Large Non - evaporable Getter pumps for application in Nuclear Beam Injectors: from conceptual design to manufacturing
15:00 | 15:10Andrea Liedl INFN - LNF, Frascati, Rome, Italy
Opportunities of tests, thermal treatments and brazing of vacuum material at the open Research Infrastructure LATINO
15:00 | 15:30Coffee Break
INNOVATION IN LARGE VACUUM SYSTEM
room pitagora
May08th
16
Conferencesession
Chairmen: S. Magazzù, A. Terrasi
15:30 | 15:50 Stefano Boscarino CNR-IMM, Catania, Italy
ZnO - MWCNTs hybrid layer for UV light detection
15:50 | 16:10 Antonino Gulino Department of Chemical Sciences, University of Catania and INSTM UdR of Catania, Catania, Italy
Molecular Nanostructures Covalently Assembled on Functionalized surfaces
16:10 | 16:30 Alessandro Pedico Politecnico di Torino, Dipartimentodi Scienza Applicata e Tecnologia (DISAT), Torino, Italy
Graphene Oxide Membranes for Water Purification
16:30 | 16:50 Simona Filice CNR-IMM, Catania, Italy
Highly effective and reusable sulfonated polymer nanocomposites for water purification applications
17:00 | 18:15 AIV Member meetingPoster session
RENEWABLE ENERGIES AND ENVIRONMENT
room pitagora
May08th
17
Conferencesession
Chairman: M. Rocca
13:45 | 14:15 Marco Smerieri Istituto dei materiali per l’elettronica ed il magnetismo, CNR
Understanding biointerfaces at the nanoscopic level
14:15 | 14:35 Giorgio Speranza Fondazione Bruno Kessler, Trento, Italy
RxpsG a new open projetc for XPS AES data processing
14:35 | 14:55 Luca Vattuone Dipartimento di Fisica, Università di Genova, Genova, Italy
Chemical reactivity of pristine and defected supported graphene
15:00 | 15:30Coffee Break
15:30 | 16:00 Cecilia Pederzolli FBK, Povo, Trento, Italy
Smart biointerfaces for cancer biomarkers analysis in extracellular fluids
16:00 | 16:20 Giuseppe Trusso Sfrazzetto Department of Chemical Sciences, Università di Catania, Catania, Italy
Enantioselective Epoxidation With Hybrid Organic/Inorganic Materials
16:20 | 16:40 Giuseppe Cassone Institute of Biophysics of the Czech Academy of Sciences, Brno, Czech Republic
Catalyst - free hydrogen synthesis from liquid ethanol: an ab initio molecular dynamics study
16:40 | 17:00Giorgio Speranza IFN-CNR, CSMFO Lab. & FBK-CMM, Povo, Department of Material Engineering University of Trento, Italy
Influence of GO coatings as bio - active platform for tissue regeneration
17:00 | 18:15AIV Member meetingPoster session
SURFACE SCIENCE AND BIOINTERFACES
room cordari
May08th
18
Conferencesession
1 - NFT M. Maniero, N. Pilan, L. Lotto, A. De Lorenzi, A. Tiso, F. Rossetto, L. Romanato, V. Cervaro Consorzio RFX, Padova, Italy
Preparation of a double polarity dc experiment at the High Voltage Padova Test Facility
2 - REEFelice Catania, Monica Periolatto, Luciano Scaltrito, Matteo Cocuzza, Candido Fabrizio Pirri, Sergio Ferrero Department of Applied Science and Technology (DISAT), Politecnico di Torino and CNR-IMEM, Parma, Italy
Spectrophotometrical monitoring system, integrated in an Autonomous Underwater Vehicle, for continuous heavy metal detection near offshore sites
3 - NFTL. Lotto, A. De Lorenzi, N. Pilan, A. Tiso, F. Rossetto, L. Romanato, M. Battistella, M. Maniero, P. Barbato, V. Cervaro Consorzio RFX, Padova, Italy
The realization of the High Voltage Short Gap Test Facilty
4 - NFTF. Degli Agostini, A. Barzon, D. Fasolo, L. Franchin, M. Tollin, A. Lo Bue, L. Semeraro Consorzio RFX, Padova, Italy and Fusion For Energy, Barcelona, Spain
Metrology for integration and installation activities at the PRIMA Test Facility
POSTER SESSION17:00 | 18:15
5 - NFTR. Rizzieri, A. Rizzolo, M. Barbisan, R. Capobianco, M. De Muri, M. Fadone, R. Ghiraldelli, B. Laterza, G. Marchiori, D. Marcuzzi, L. Migliorato, F. Molon, D. Ravarotto, F. Rossetto, E. Sartori, G. Serianni Consorzio RFX, Padova, Italy
The Caesium Test Stand for the development of the caesium ovens for negative
6 - REER. G. Milazzo, S. M. S. Privitera, S. Scalese, S. Mirabella, S. Lombardo and E. Rimini CNR-IMM, Catania, and Dipartimento di Fisica ed Astronomia,
Università di Catania, Italy
Nano - Porous PtNPs on Si substrates obtained with galvanic displacement deposition
7 - REEAlberto Sciuto, Antonino La Magna Dipartimento di Fisica e Astronomia, Università di Catania and CNR Istituto per la Microelettronica e Microsistemi, Catania, Italy
Finite Element Method to determine Quantum Efficiency of microstructured Photovoltaic Devices
8 - REEFrancesca Monforte, Giovanni Mannino, Alessandra Alberti, Emanuele Smecca, Markus Italia, Alessandro Motta, Cristina Tudisco and Guglielmo G. Condorelli CNR-IMM Catania, and Dipartimento di Scienze Chimiche, Università di Catania and INSTM UdR Catania, Italy
Nucleation and growth of ZIF8 and MIL frameworks on silicon - based substrates and copper foils
room tindari Bpitagoracordari
May08th
19
Conferencesession
9 - REEG. Borgh, R. A. Puglisi, C. Bongiorno, E. Fazio, C. Garozzo, G. Mannino, F. Neri, G. Pellegrino, S. Scalese and A. La Magna CNR Istituto per la Microelettronica e Microsistemi, Catania, Italy
Control on the physico - chemical properties of the Si nanowires surface
10 - NFTD. Rigamonti, L. Giacomelli, G. Gorini, M. Nocente, M. Rebai, M. Tardocchi Istituto di Fisica del Plasma, CNR, Milano, and Dipartimento di Fisica “G. Occhialini”, Università degli Studi di Milano-Bicocca
Recent development of inorganic scintillators for 2.5 MeV neutron spectroscopy of fusion plasmas
11 - NFT
D. Ravarotto, G. Moro, G. Serianni Consorzio RFX, Padova, Italy
Proposal for upgrades of the control and data acquisition system of the Negative Ion Source NIO1
12 - MTAMSergio Bisone PEAKJET srl, Montalto Dora, Torino, Italy
Thermal Inkjet micro - deposition: a tool for research and additive manufacturing
13 - MTAMG. Scordo, V. Bertana, F. Perrucci, S. Ferrero, C.F. Pirri, S.L. Marasso, M. Cocuzza, Ayman El-Tamer, Ulf Hinze, Boris N. Chichkov, L. Scaltrito Department of Applied Science and Technology (DISAT), Politecnico di Torino, Italy
3D printed suspended micro - filter integrated in a printed microfluidic channel
14 - MNSECFA. Ballesio, M. Parmeggiani, A. Verna, M. Cocuzza, C.F. Pirri, S.L. Marasso, F. Frascella Department of Applied Science and Technology (DISAT), Politecnico di Torino, Italy
A novel Graphene transfer for flexible electronics
15 - SSBA. Puliafito, S.L. Marasso, D. Mombello, S. Benetto, M. Cocuzza, L. Primo, F. Bussolino, C.F. Pirri Laboratory of Cell Migration, IRCC, Candiolo, Turin, Italy
3D microfluidic platform for the study of cells chemotaxis
16 - SSBSimone Marasso, Matteo Cocuzza, Pasquale D’Angelo, Giuseppe Tarabella, Alessio Verna, Carlotta Peruzzi, Davide Vurro and Salvatore Iannotta Department of Applied Science and Technology (DISAT), Politecnico di Torino and Istituto dei Materiali per l’Elettronica ed il Magnetismo, CNR, Parma, Italy
OECTs as a multipurpose device for biosensing
17 - MNSECFVincenza Armenise, Eloisa Sardella, Marta Garzia Trulli, Fabio Palumbo, Roberto Gristina, Pietro Favia, Francesco Fracassi, Department of Chemistry, University of Bari “Aldo Moro”, Bari, Italy
Plasma deposition of coatings with oxygen containing functionalities on alumina microparticles
18 - MNSECFG. Speranza, M. Dalla Serra, V. Antonini Fondazione Bruno Kessler, Trento, IFN-CNR and IBF-CNR Trento, and Department Industrial Engineering of University of Trento, Italy
Plasma treatments of surfaces forapplication in biomedicine
May08th
20
Conferencesession
19 - MNSECFE. Maggiore, D. Dellasega, D. Vaccarini, F. Ripamonti, M. Tommasini, P.M. Ossi Dipartimento di Energia, Politecnico di Milano
On the sliding of skis with differently treated metal bases
20 - MNSECFE. Vassallo, M. Pedroni, A. Nardone, T. Silvietti, S. Morandi, M. Brasca Institute for Plasma Science and Technology and Institute of Sciences of Food Production, CNR, Milan, Italy
Bacterial inactivation using low temperature plasmas
21 - SSBLorenzo Lunelli, Paolo Bettotti, Valeria Visone, Giuseppe Perugino, Maria Ciaramella, Anna Valenti Laboratory of Biomarker Studies and Structure Analysis for Health, FBK, Povo and Institute of Biophysics, CNR, Trento, Italy
Supercoiled DNA structure investigated with atomic force microscopy
22 - MNSECFA. Milella, N. De Vietro, A. Tursi, A. Beneduci, F. Chidichimo, F. Fracassi, G. Chidichimo Department of Chemistry, University of Bari “Aldo Moro” and Institute of Nanotechnology (Nanotec), CNR, Bari, Italy
Plasma treated Spanish Broom cellulose fiber for the removal of petroleum hydrocarbons from polluted water
23 - MNSECFE. Pascali, V. Signore, C. Sasso, T. Dabadie and A. Milella Jindal Films Europe Brindisi Srl, Via Enrico Fermi, Brindisi, Italy
Plasma assisted deposition of AlOx barrier coatings for packaging applications
24 - ILVSA. Liedl, M. Angelucci, E. La Francesca, F. Siewert, M.G. Sertsu, A. Sokolov, F. Schäfers and R. Cimino INFN-LNF, Frascati, Rome, Italy
Photo Reflectivity and Photo Electron Yield of Technical Materials for High Energy Accelerators
25 - ILVSM. Angelucci, M. Pietropaoli , G. Viviani , A. Grilli, A Raco, V. Sciarra, V. Tullio, L. Spallino, and R. Cimino Laboratori Nazionali di Frascati (LNF), INFN, Frascati, Italy
New WINDY beamline for photon induced desorption with DAFNE synchrotron radiation at LNF
26 - REEM. T. Caccamo, G. Castorina, F. Colombo and S. Magazù CNR, Istituto per i Processi Chimco - Fisici (IPCF), Messina, Dipartimento di Scienze Matematiche e Informatiche, Scienze Fisiche e Scienze della Terra, Università di Messina, and Servizio Meteorologico dell’Aeronautica Militare, Comando Aeroporto – Sigonella, Catania, Italy
Spectroscopic Characterization of Innovative Aviation Materials
21
9:00 | 9:40 Sabrina Sartori Department of Technology Systems, University of Oslo, Norway
Towards next-generation renewable energy technologies
ConferencesessionMay 09th
program
PLENARY LECTUREroom dionisio
May09th
22
Conferencesession
Chairmen: S. Dal Bello, G. Mazzitelli, E. Vassallo
9:40 | 10:10 Giuseppe Zollino Consorzio RFX, Università di Padova, Italy
Scenarios for power generation in Italy
10:10 | 10:40Luigi Semeraro Fusion for Energy, ALP, Girona, Spain
From point metrology to cloud data for ITER assembly
10:40 | 11:00Coffee Break
11:00 | 11:30Rudolf Neu Max - Planck - Institut für Plasmaphysik, Garching, Germany
Overview Materials and components for DEMO
11:30 | 12:00Hans Van Eck FOM Institute DIFFER, Netherlands
Contribution of a linear device to fusion research (Magnum PSI)
12:00 | 12:30Marica Rebai Istituto di Fisica del Plasma - CNR, Milano, Italy
Advancements of neutron and γ - ray diagnostics for JET and perspectives for ITER
12:30 | 13:30Lunch
NUCLEAR FUSION TECHNOLOGY
room pitagora
May09th
23
Conferencesession
Chairmen: S. Magazzù, A. Terrasi
9:40 | 10:05Ten. Col. Franco Colombo Aeronautica Militare
WRF - SOLAR: L’utilizzo dei modelli meteorologici a supporto delle produzioni energetiche
10:05 | 10:25 G. Castorina Department of Mathematical and Informatics Sciences, Physical Sciences and Earth Sciences (MIFT), University of Messina, Italy
Use of innovative technologies, materials and models in the aeronautical environment
10:25 | 10:45 Giuseppe Firpo Nanomed Labs, Physics Department, University of Genova, Italy
Surfaces effects of thin polymeric membranes for CO2 capture and to reduce its emissions
10:45 | 11:10Coffee Break
11:10 | 11:35Cosimo Gerardi Enel Green Power
High efficiency HJT solar cells: innovative silicon based PV technology for reducing energy generation costs in solar plants
RENEWABLE ENERGIES AND ENVIRONMENT
11:35 | 11:55Simona Binetti Department of Material Science and MIBSOLAR center, University of Milano Bicocca, Italy
The current status and future prospects of chalcogenide thin film solar cells
11:55 | 12:15Emanuele Smecca CNR-IMM Catania, Italy
Hybrid Perovskites for Photovoltaics: challenges and opportunities
12:30 | 13:30Lunch
room dionisio
May09th
24
Conferencesession
Chairmen: S. Ferrero, L. Scaltrito
9:40 | 10:10 Francesca Tramacere IIT, Pisa, Italy
Plant - like soft robots growing by additive manufacturing
10:10 | 10:40 Annalisa Chiappone Politecnico di Torino, Italy
Nanocomposites for DLP - SL 3D Printing
10:40 | 11:00Coffee Break
11:00 | 11:30Giulia Massaglia DISAT, Politecnico di Torino, Italy
Electrospun Nanofibers as advanced materials for bio - devices
11:30 | 12:00 Marzia Quaglio IIT, Torino, Italy
Microfluidic modeling of porous media by additive manufacturing
12:00 | 12:30Salvatore Iannotta AIV associated ad honorem
Organic Electrochemical Transistors and Additive Manufacturing: a perspective in sensing and biosensing
12:30 | 13:30 Lunch
MATERIALS AND TECHNOLOGY FOR ADDITIVE MANUFACTURING
room cordari
25
ConferencesessionMay 10th
program
May10th
26
Conferencesession
Chairmen: S. Dal Bello, G. Mazzitelli, E. Vassallo
9:05 | 9:30 Diego Marcuzzi Consorzio RFX, Padova, Italy
ITER Neutral Beam Test Facility status
9:30 | 9:55 Gian Mario Polli Università Napoli Federico II, Napoli, Italy, and Consorzio CREATE, Napoli, Italy
DTT: Overview and Status of the Project
9:55 | 10:20Antonio De Lorenzi Consorzio RFX, Padova, Italy
HV Holding in Vacuum, a Key Issue for the ITER Neutral Beam Injector. The contribution of Consorzio RFX
10:20 | 10:50Coffee Break
10:50 | 11:15Selanna Roccella ENEA, Fusion and Technologies for Nuclear Safety Department, C.R. Frascati, Italy
CPS Liquid Metal Divertor cooled by ‘low’ temperature water
11:15 | 11:40Valentina Casalegno Politecnico di Torino, Italy
Co - sputtered w/fe interlayers for joining tungsten to steel
12:05 | 12:30Carmine Castaldo ENEA, Fusion and Technologies for Nuclear Safety Department, C.R. Frascati, Italy
Dust particles in magnetic fusion devices
12:30 | 12:55Boris Paladino Center for Nano Science and Technology (CNST), Istituto Italiano di Tecnologia (IIT), Milano and Politecnico di Milano, Energy department
Multifunctional nanoceramic barriers for breeding blanket applications
13:00Closing remarks of the AIV President
NUCLEAR FUSION TECHNOLOGY
room pitagora
May10th
27
Conferencesession
Chairmen: S. Magazzù, A. Terrasi
9:00 | 9:20S. M. S. Privitera Istituto per la Microelettronica e Microsistemi (IMM), CNR, Catania, Italy
Electrochemical water splitting with functionalised Ni foam electrodes
9:20 | 9:40 Giacomo Torrisi Università degli studi di Catania, Department of Physics and Astronomy, Catania and CNR-IMM Sede Università di Catania, Italy
New concept of transparent electrodes: the multilayer structure of TCO/Ag/TCO for PV applications
9:40 | 10:00Guido Sciuto University of Catania, Department of electric electronic and informatic (DIEEI), Catania and Ambiens srl, Valguarnera Caropepe, Enna, Italy
Proposal of repowering of a Large Photovoltaic Plant with feed - in premium locate in Sicily
10:00 | 10:20Davide Cimmino DISAT, Politecnico di Torino, Italy
High Voltage Temperature Humidity Bias (THB - HV) Ad-hoc Measurement system for Reliability Assessment of Power Semiconductor devices in harsh environment applications for energy conversion
RENEWABLE ENERGIES AND ENVIRONMENT
10:20 | 10:50Coffee Break
10:50 | 11:10Roberta Busca DISAT, Politecnico di Torino, Italy
Multi - layer film Passivation Study for reliability performances enhancement of power semiconductor devices
11:10 | 11:30Martina Ussia University of Catania, Department of Physics and Astronomy “Ettore Majorana”, Catania and CNR-IMM Catania Unit, Catania, Italy
Hybrid Nickel - free graphene polyporphririn photocatalyst: time - saving formulation and photodegradation studies formulation and photodegradation studies
11:30 | 11:50Marco Leonardi CNR-IMM Catania, Italy
Metal oxide - chitosan nanocomposites for efficient and smart fertilization
11:50 | 12:10R. G. Milazzo CNR-IMM Catania, Italy
Electroless deposited IrOx nanoparticles for Ni foam functionalization with low iridium loading
13:00Closing remarks of the AIV President
room dionisio
May10th
28
Conferencesession
Chairmen: S. Ferrero, L. Scaltrito
9:05 | 9:20 Enrico Tamburini SPEA, Volpiano, Torino, Italy
Progetto SMART3D (Industry 4.0)
9:20 | 9:40 Manuela Galati Politecnico di Torino, Italy
An innovative approach of the Design for Additive Manufacturing applied to industrial case studies
9:40 | 10:00Matteo Perini Università di Trento, Italy
Die casting mold repair by Hybrid Manufacturing
10:00 | 10:20Enrico Manini Thallosjet Srl, Pont Saint Martin, Aosta, Italy
Thallosjet: a printer for research and additive manufacturing applications
10:20 | 10:50Coffee Break
10:50 | 11:10Valentina Bertana Politecnico di Torino, Italy
Intrinsically conductive polymer for 3D printing applications
11:10 | 11:30 Francesco Perrucci Politecnico di Torino, Italy, Cemas Elettra, Proplast
Laser weldability of polymeric 3D printed parts
11:30 | 11:50Mattia Bartoli Department of applied science and technology, Politecnico di Torino, Italy
Biochar as effective tool for conductive polymers composites production
11:50 | 12:10Luca Iuliano DIGEP, Politecnico di Torino, Italy
Additive Manufacturing at Politecnico di Torino: design support for processes, systems and materials
13:00 Closing remarks of the AIV President
MATERIALS AND TECHNOLOGY FOR ADDITIVE MANUFACTURING
room cordari
29
courses
Hilton HotelViale Jannuzzo, 47 - 98035
Giardini Naxos (ME)
The courses will be held in italian language
29
30
Basic Vacuum TechnologyMay 07th
Speaker: Prof. G. Firpo Università di Genova, Italy
10:00 | 12:00
Free course in Basic Vacuum Technology
12:00 | 14:00 Lunch
14:00 | 16:00
Free course in Basic Vacuum Technology
16:00 | 16:15Coffee Break
16:15 | 18:00
Free course in Basic Vacuum Technology
courses
room cordari
31
Horizon 2020 Project Management and Finance CourseMay 09th
Speaker: Enrico Tamburini SPEA, Volpiano, Torino, Italy
13:30 | 14:50
From Horizon 2020 to Horizon Europe
15:00 | 23:00 Tour to Etna and Social Dinner
courses
room dionisio
3232
>> Click here to express your opinion
about AIV Conference
https://docs.google.com/forms/d/10SuI10L0DWyAHvSa_6mSa-qQyw94
vZIflC0kHSy2568/viewform?edit_requested=true
assessment
32
33
AIV
33
34
The Italian Association of Science and Technology was founded in 1963 with the aim of spreading in Italy the scientific, technological and applicative knowledge of vacuum techniques, surfaces, interfaces, innovative materials, thin films, plasmas and vacuum metallurgy.
AIV organizes conferences, workshops and seminars of high scientific and technological profile, promotes schools and training courses and in general educational events for young graduates and for technicians, which offer the opportunity to improve their knowledge or to start a new activity.
From the outset, AIV has dedicated considerable efforts to foster the exchange of information between the academic and industrial worlds, stimulating synergies and opportunities for “cross fertilization”.
The AIV networking activities are aimed at stimulating effective cooperation and technology transfer between the world of research, the industrial and the academic world.
AIV is a member of the International Union for Vacuum Science, Technique and Applications (IUVSTA).
AIV
What is AIV
35
56th anniversary
AIV
1979Bari
1996Milano
1974Perugia
1993Bolzano
2009 Senigallia
1963birth of AIV
1981Bressanone
1998Vicenza
2011Padova
1966Firenze
First AIVconference
1983Firenze
2000Lecce
2013Catania
1968Torino
1985L’aquila
2002Catania
2015Genova
1970Saint Vincent
1987Stresa
2004Venezia, Ivc, 16Th
2017Firenze
1972Milano
1990Trieste
2007Firenze
2019Giardini Naxos
36
Board of directors
Presidente:
Luciano Scaltrito Politecnico di Torino, Italy
Vice-Presidente:
Espedito Vassallo CNR, Istituto per la Scienza e Tecnologia dei Plasmi ISTP, Milano
Consiglieri:
Anderle Mariano Embassy of Italy, Hanoi, Vietnam
Roberto Cimino INFN, Frascati, Italy
Matteo Cocuzza Istituto dei Materiali per l’Elettronica ed il Magnetismo, CNR, Parma, Italy
Sonia De Angelis Air Liquide, Catania, Italy
Sergio Ferrero Politecnico di Torino, Italy
Giuseppe Firpo Università di Genova, Italy
Andrea Lamberti Politecnico di Torino, Italy
Enrico Maccallini Saes Group
Giorgio Speranza FBK, Trento, Italy
Antonio Terrasi Università di Catania, Italy
Segreteria:
Angela Riggio CNR- IFP, Milano, Italy
AIV
AIV - Associazione Italiana di Scienza e Tecnologia
Member of IUVSTAInternational Union for Vacuum Science Technique and Applications
www.iuvsta-us.org
P.le Morandi, 2 - 20121 Milano, Italiawww.aiv.it CF - [email protected].
